on request is possible produce carbon parts with another...

OVERVIEW 2019 The customization programme for Bentley Flying Spurlast update 02 / 2016

real size 1:1

Carbon fibre fine - standard

On request is possible produce carbon parts with another structure from our collection - mansory.com/carbon

THE OPTIONS FOR YOUR BENTLEY FLYING SPUR V8 / W12

*matte coating on request - All listed carbon fibre parts are produced from standard MANSORY Carbon fibre fine (T200), or like the same carbon fibre as OEM standard parts. Prices and technical specifications are subject to change without prior notice, errors reserved.All prices calculated net, ex works excluding VAT, without painting and modification work. © all copyrights by MANSORY Design & Holding GmbH General Terms and Conditions at www.mansory.com/gtc last update 04 / 2019 - page 1

BFS 102 022

BFS 102 023

Front bumper I. with LED daylight ( chrome grills )with front lip visible carbon fibre without clear coatmiddle grill chrome compatbile for cars with or without ACC sensorair intake grills chrome - 2 parts set left/right with LED daytime running and fog lights

Front bumper I. with LED daylight ( primed grills )with front lip visible carbon fibre without clear coatmiddle grill primed compatbile for cars with or without ACC sensorair intake grills primed - 2 parts set left/right with LED daytime running and fog lights



BFS 102 051 BFS 102 041

BFS 102 052 BFS 102 042

Front bumper II. with grill mask II. for B-sculpture- front lip visible carbon fibre without clear coat, air intake grills- grill mask II visible carbon fibre without clear coat- LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately

Front bumper II. with grill mask- front lip visible carbon fibre without clear coat, air intake grills- grill mask visible carbon fibre without clear coat- LED daytime running lights compatbile for cars with or without ACC sensor

Front bumper II. with grill mask II. for B-sculpture - primed- front lip visible carbon fibre without clear coat, air intake grills- grill mask II not visible carbon fibre- LED daytime running lights compatbile for cars with or without ACC sensor Flying-B-sculpture BFS 00B OEM must be ordered separately

Front bumper II. with grill mask - primed- front lip visible carbon fibre without clear coat, air intake grills- grill mask not visible carbon fibre- LED daytime running lights compatbile for cars with or without ACC sensor



Rear bumperwith diffuser visible carbon fibre without clear coat, air intakes, exhaust blinds

Side skirtswith lip visible carbon fibre without clear coat

BFS 802 031 BFS 595 002

BFS 210 002 BFS 210 001Engine bonnet primednot visible carbon fibre

Engine bonnetvisible carbon fibre without clear coat



BFS 102 331

BFS 102 332

BFS 102 341

BFS 102 342

BFS 112 341

BFS 112 342

BFS 00B OEM

Front grill maskvisible carbon fibre without clear coatFront grill mask primednot visible carbon fibre compatible with OEM Front bumper model 2004 - 2015 and MANSORY Front bumper I.

Front grill I. mask for B-sculpturevisible carbon fibre without clear coatFront grill I. mask primed for B-sculpturenot visible carbon fibre Flying-B-sculpture BFS 00B OEM must be ordered separately compatible with OEM Front bumper model 2004 - 2015 and MANSORY Front bumper I.

Front grill mask for B-sculpture (2016)visible carbon fibre without clear coatFront grill mask primed for B-sculpture (2016)not visible carbon fibre Flying-B-sculpture BFS 00B OEM must be ordered separately compatible with OEM Front bumper from model 2016

Flying-B-sculpture( Original part - no discount ) compatible only with Front grill I / II mask for B-sculpture

BFS 522 751 BFS 522 761Mirror housing with feet LHDMirror housing with feet RHD4 parts set - left/right,visible carbon fibre glossy*



BFS 221 059

BFS 830 842

BFS 221 009

BFS 830 841

X-pipe center pipewithout CAT (catalyst)

only for W12 model till 2014not compatible with model V8

Rear decklid spoiler - primedprimed not visible carbon fibre

Mufflers2 parts set - left & right, with throttle control

Rear decklid spoiler - exposedvisible carbon fibre without clear coat

BFS 000 99

BFS 000 09

V8 Engine carbon cover5 Part set conversion kitvisible carbon fibre without clear coat

W12 Engine carbon cover3 Part set conversion kitvisible carbon fibre without clear coat


THE ADD ON PARTS FOR YOUR BENTLEY FLYING SPUR V8 / W12

Rear diffuservisible carbon fibre without clear coat not compatible with MANSORY Rear bumper ( BFS 802 031 )

Side skirts lipvisible carbon fibre without clear coat not compatible with MANSORY Side dkirts ( BFS 595 002 )

BFS 802 891

BFS 595 751

BFS 102 841Front bumper lipvisible carbon fibre without clear coat, air intake grills not compatible with MANSORY Front bumper ( BFS 102 022 )

BFS 112 851Add on chrome stripe - for front bumper2 parts set - left & right



MANSORY Lowering Suspensionconsisting of: - 2 level adjusting rods front axle- 2 level adjusting rods rear axleLowering of approx 20-30 mm

With the MANSORY Lowering Suspension you have the optimal symbiosis of excellent ride comfort during normal driving and agile direct response during fast cornering.

The product described in the instructions has been developed, and manufactured under consideration of the necessary safety regulations, and is subject to quality checks. To guarantee flawless, safe function and to eliminate any risk to people or property, this product must be installed properly. Therefore installation should only be carried out by trained specialists, with the specific technical and specialist knowledge required for installation in a vehicle, and the necessary tools. For this, you must carefully read and understand the fitting instructions.

Before starting work, check that all parts which should be included are present.

- Raise the vehicle on a suitable lifting mechanism at the position points specified by manufacturer, considering the relevant safety guidelines.

- Take off the original connecting rods from the height sensors on the front and rear axles. - Put the connecting rod on the ball heads on the height level sensors and the holders. - Re-fit the wheels to the vehicle according to workshop instructions. - After installation of the connecting rod, no further adjustments should be made.

BFS 900 101MANSORY Lowering Suspension for Bentley Flying Spur 2 level adjusting rods front axle, 2 level adjusting rods rear axleLowering of approx 20-30 mm

Front axle

Rear axle


THE INTERIOR OPTIONS FOR YOUR BENTLEY FLYING SPUR V8 / W12

BFS 300 000 BFS 395 351 BFS 395 355

BFS 351 500 BFS 350 011

MANSORY Individualized Interior KitComplete refined interior, by exclusive leather sorts, combination on customers request.

Entrance panels with blue illuminated MANSORY logo Entrance panels with white illuminated MANSORY logo 4 parts set - front/rear, left/right,available with metal

Airbag coveravailable with leather, alcantara, carbon, wood modification only, OE-part required

Shift paddles,available with carbon and wood modification only, OE-part required

BFS 351 441

BFS 351 445

BFS 351 446

BFS 351 444

Sport steering wheelwith MANSORY logo

leather/carbon

leather/wood

leather/piano lacquer

leather/leather

modification only, OE-part required


THE INTERIOR OPTIONS FOR YOUR BENTLEY FLYING SPUR V8 / W12

BFS 300 001

BFS 367 758

BFS 367 127

BFS 368 758

BFS 363 011

BFS 368 500

Interior trims instrument panel, co-driver board, middle console front 2-parts, middle console rear 2-parts, ashtray, cover front and rear, jalousie front and behind, cover for light system front, 4-parts door panels available with carbon and wood modification only, OE-part required

Floor mats4 parts, front/ rear, left/ rightwith MANSORY logo stitching

Sport pedals3 parts set, acceleration, brake, foot rest

Trunk matwith MANSORY logo stitch

Gearshift leverdesigned gearshift leveravailable with carbon and wood modification only, OE-part required

Trunk house decorComplete refined trunk compartment, by exclusive leather sorts, combination on customers request.


THE RIM FOR YOUR BENTLEY FLYING SPUR V8 / W12

V6 22 10 43 1220 S V6 22 10 43 1220 A V6 22 10 43 1220 B V6 22 10 43 1220 BG

Y8 22 10 30 112 SP

Y8 21 105 30 112 SP

FS13 22 10 30 112 PV.6 wheel ( Silver diamond cut )V.6 wheel ( Anthracite diamond cut )V.6 wheel ( Black diamond cut )V.6 wheel ( Black glossy )1pc., 10,5 x 22”, OS 43, with chrome / silver wheel cap

* price per piece* without tire

Tiresrecommended tyre site: 295/30/22Continental SP5

Y.8 wheel 22” ( Silver diamond cut )1pc., 10 x 22”, OS 30,with chrome/ silver wheel cap



Y.8 wheel 21” ( Silver diamond cut )1pc., 10 x 21”, OS 30,with chrome/ silver wheel cap


CS.13 spoke wheel, aluminium casted 22 inch polished1pc., 10 x 22” OS 35with chrome/ silver wheel cap




THE RIM FOR YOUR BENTLEY FLYING SPUR V8 / W12

BFS 611 D05

BFS 611 D15

BFS 611 D10

CS10 21 105 30 112 S CS10 21 105 30 112 DG

CS10 22 10 30 112 S

Spacer kit for Y.8, CS.10spacers wheel 5 mm RAincluding screws, 2 parts setSpacer kit for V.6spacers wheel 10 mm FA and 15 mm RAincluding screws, 4 parts setSpacer kit for CS.13 spokespacers wheel 10 mm RAincluding screws, 2 parts set

CS.10 rim 21 inch ( Silver diamond cut )with black / silver wheel cap

1pc., 10.5 x 21” OS 30 Silver / fr. polished1pc., 10.5 x 21” OS 30 Dark grey / fr. polished


CS.10 rim 22 inch ( Silver diamond cut )1pc., 10 x 22” OS 30with chrome/ silver wheel cap * price per piece* without tire


CS11 21 9 30 1230 S CS11 21 9 30 1230 A CS11 21 9 30 1230 B

CS11 22 105 42 1230 S CS11 22 105 42 1230 A CS11 22 105 42 1230 B

CS.11 21 inch wheel- Diamond silver- Diamond anthracite- Diamond black

CS.11 22 inch wheel- Diamond silver- Diamond anthracite- Diamond black * price per piece* without tire

on request is possible produce carbon parts with another...

Documents