ordering of ophthalmic lens
TRANSCRIPT
OPTOM FASLU MUHAMMED
Ordering of ophthalmic lensUse a separate form for each order.
Do not include unnecessary data or information on any forms if such data are not necessary or applicable to the order.
Lens InformationWhen written on a blank prescription pad,
such a prescription would be written with the left lens value directly below that of the right lens.
OD: −3.00 D sph OS: −2.75 −1.50 × 175
Always use at least three figures for the sphere and cylinder components.
If the dioptric unit is less than 1.00 D, use a prefatory zero before the decimal point, as for example, +0.75 D.
Carry figures two places after the decimal point, as for example, +2.00 D (not +2 D) or −1.50 D (not −1.5 D).
State the axis as x, but do not put a degree sign after the numbers representing the cylinder axis because it may be mistakenly read as an extra zero.
Frame InformationBe sure to specify the style of temple desired
if more than one style is available.
Print the name of the frame and include the name of the manufacturer.
Obtaining Lens Information forExisting SpectaclesTake New Facial Measurements.
Retake the wearer’s PD.
If the lenses are either bifocal or trifocal lenses, note where the segment line falls in reference to the lower limbus.
(1) Some recommend that the wearer’s last name be written here in all capital letters.
(2) List only if ordering special base curves. Otherwise leave blank.
(3) List the MRP height only this. fitting cross height is listed for progressive addition lenses.
(4) Do not give both binocular and monocular PD s. Use either one or the other, but not both.
(5) You must indicate a lens material.
(6) Normally you do not specify a thickness for the lens.
(7) Indicate multifocal type and seg size, or progressive lens brand when appropriate.
(8) Indicate as specifically as possible what color lens you want. Indicate the desired transmission or shade.
lenses have no tint, write “clear” or “white.”
(9) If slab-off is being ordered, indicate the prism amount of the slab-off.
(10) The frame name & the manufacturer must be listed.
(11) Color may be a number.
(12) Temple name : skull, cable, riding bow, library.
(13) Indicate whether the frame is metal, plastic, or rimless.
(14) Special Instructions” is for calling attention to anything unusual about the prescription.
e.g.:- SRC,UV,ARC
(15) Signature of the person or the name of the office that is ordering the prescription.