Organised by FMM INSTITUTE (475427-W)

Centre For Professional Development

March 28 & 29, 2020 (Saturday & Sunday) 8.30 am – 5.00 pm Politeknik Ungku Omar, Ipoh, Perak

his arc welding courses is designed for those who are interested in the field of basic

welding. Participants will understand and learn the practical knowledge of the

SMAW/ARC process. They will also acquire knowledge on the common types of

welding consumables and equipment used in the SMAW/ARC process.

….OBJECTIVES….

Upon completion of the course, participants will be able to: Acquire practical knowledge and understanding

of the SMAW/ARC process Acquire knowledge of the common types of

welding consumables and equipment used in the SMAW/ARC process

….WHO SHOULD

ATTEND….

This programme is specially designed for welders.

….COURSE CONTENTS….

HANDS-ON PRACTICE ON SMAW / ARC PROCESS IN BASIC POSITIONS Types of welding positions

Flat / down hand Horizontal Vertical up / down Over head

Types of welding joints Butt joint Lap joint Tee joint Corner joint Edge joint

USAGE OF WELDING CONSUMABLES E.G. ELECTRODE, SHIELDING GAS Types of electrode The benefit of flux in electrode Purpose of shield gas BASIC FUNCTIONS OF THE WELDING EQUIPMENT FOR SMAW / ARC ASSESSMENT Types of welding machines Functions of welding machines Cables, electrode holder, shield and

other equipment

For further details, please contact Ms Nicole / Pn Eda / Ms Harvindar (05) 548 8660 (05) 548 8221 fmmperak@fmm.org.my

SBL

SCHEME

….TRAINER….

Mr Sivasan Karan A/L Krishna Nair

holds a Bachelor of Education (Mechanical) from Open University Malaysia, a Diploma in Education (Welding and Fabrication of Metal) from Maktab Perguruan Teknik and a Certificate in General Engineering (Mechanical) from Politeknik Ungku Omar. His area of expertise is in welding and fabrication.

Mr Sivasan who has more than 26 years of working

experience is currently the Higher Education Officer at Politeknik Ungku Omar. His responsibilities include being the lecturer for DKM 6, the Department Coordinator of Polyskills and also the Coordinator of Welding workshops at Politeknik Ungku Omar. He is also the Welding Inspector and Welding Specialist for Duisburg Germany from July 2000 to May 2001. Mr Sivasan has participated in the publications of ‘Automatic Cutting Fluid Control in Miling Machine’, ‘Rapid Improvement of Duty Cycle of a Portable Welding Machine Performance’, ‘Full Hydraulic Transmission System Design for Automobile Application’ and ‘PV-Elite Based design of a Pressure Vessel’. His area of expertise is in welding and fabrication.

….COURSE DETAILS….Date March 28 & 29, 2020

(Saturday & Sunday) Time 8.30am – 5.00pm Venue Politeknik Ungku Omar

Jalan Raja Musa Mahadi 31400 Ipoh, Perak

CPD hour:

7

Medium of Instruction: English Fees: FMM Members RM1309.10/pax Others RM1468.10/pax

(Fees inclusive of Service tax at 6%, Course Materials,

Refreshment, Lunch and Certificate of Attendance)

Closing Date: March 20, 2020

DISCLAIMER

The FMM Institute reserves the right to change the facilitator, date and to vary / cancel the course should unavoidable circumstances arise. All efforts will be taken to inform participants of the changes.

REGISTRATION

Upon Faxing/Mailing the completed Registration Form to FMM Institute, you are deemed to have read and accepted the terms and conditions. The course would also be deemed as confirmed unless informed otherwise.

Will be based on First-Come-First served basis.

PAYMENT

Cheques made in favour of “FMM Institute” should be forwarded to FMM Institute Perak. For SBL Scheme, an Attendance of 100% is a must, in any case, employers will be billed in

full.

CANCELLATION

Must be in Writing with Reasons 7 days before the course – No payment charged 3 – 6 days before the course - 50% payment charged < 3 days before the course – Full payment charged Participants who did not turn-up will be charged full payment Replacements can be accepted at no additional cost.

~ Registration Form ~

FMM Institute No 1, Lorong Raja DiHilir, 30350 Ipoh, Perak Fax: 05-5488221 Dear Sir / Madam, please register the following participant(s) for the above programme.

Name: Designation: I.C. No

1.

2.

3.

(Please attach a separate list if space is insufficient)

Enclosed cheque/bank draft No ___________for RM ____________ being payment for ________ participant(s) made in favour of the “FMM Institute”. Submitted by:

Name: Designation:

Company: Tel: Fax:

Address:

Email: FMM Membership No My CoID: