%orrpilhog 6wuhhw /rv $odplwrv &$ 7roo iuhh 3krqh … · parts are not damaged. thread guards...

10575 Bloomfield Street, Los Alamitos, CA 90720Toll free: 888-458-9717 - Phone: 714-848-4118 - Fax: 714-848-6240

Website: www.casterindustries.com Email: [email protected]

HOW TO SELECT THE RIGHT CASTERSBall Bearings are used where maximum rollability is required. This type

should be used for loads from 400 to 1,200 pounds. Because of the ball contact area, ball bearings are the least frictional type available in caster wheels.

Roller Bearings are used when greater load capabilities and rollability are required. Hardened rollers revolving around a hardened spanner bushing distribute the heavier load over a larger area.

Delrin Bearings are an impregnated Dupont plastic product that performs efficiently in a wide temperature range. They are durable, corrosion resistant, and require minimum lubrication even in steam cleaning or where water or other liquids are present.

OPERATING ENVIRONMENT AND WHEEL MATERIAL

Work conditions must be carefully evaluated before selecting wheel material (see WHEEL APPLICATION GUIDE on page 5). The presence of acids, oils, or corrosive chemicals requires wheels made of polyurethane, phenolic, polyolefin, or steel. Never use rubber in any corrosive environment. Extreme temperatures require spe-cial bearing lubricants, available from Jarvis.

CASTER CLASSIFICATIONS

For the heaviest loads in material handling and industrial applications, select drop forged casters with double ball bearing nut and bolt kingpin construction. For facto-ry, warehouse, and large retail operations, select heavy duty cold forged casters. For handpushed material handling equipment, select standard heavy duty casters. Always make certain to choose casters within the manufacturer's load capacity specifications. For most institutional applications, select medium or light-medium duty casters.

FLOOR CONDITIONS

As a general rule, hard treads perform better on soft or smooth floors, and soft treads roll better on hard or rough floors, including most outdoor surfaces. When choosing a wheel, take into consideration all special floor features -- tracks, gutters, grates, sills, or dock plates. The larger and softer the wheel, the greater the ability to roll over rails and similar obstacles. To protect floors from damage, choose softer materials. Rubber, especially high modulus rubber, will give quietest movement and maximum floor protection, while steel is hardest on floors. Polyurethane is fre-quently an effective compromise, giving moderate floor protection with greater load capacity.

SPECIAL CONDITIONS

There are many conditions that may require selection of casters with special fea-tures. Consult a safety engineer to determine whether any specific conditions exist that would require selection of special features for safety. Listed below are a few conditions which may require special features:• In hospitals or other facilities where cart washings are required, select nickel-

plated casters with grease seals and zerk fittings. For very frequent washings or wet environments, select stainless steel casters.

• In textile plants, to avoid collection of thread or string in casters, select casters with thread guards.

• In manufacturing facilities or other areas where dirt, grease, liquids, solvents, or sprays are used, select medium- or heavy-duty industrial grease-sealed casters.

• For small, low equipment, such as office machines, select very wide, small diam-eter wheels from our business machine section.

• For medical equipment, such as case carts or instrument carts that require swivel locks or positive brake swivel locks, select our 50/50H health care series casters.

Casters and wheels are offered in many sizes and types. Although there is no simple formula to follow in choosing the proper caster or wheel, the WHEEL APPLICATION GUIDE on page 5 and the information provided with each caster series will help you select the right casters and wheels for your application.

To get the best performance from your casters and wheels:• determine the requirements for your industry or market• consult OSHA requirements and your engineering department to determine the

specific type of caster needed• fully understand how the casters and wheels will be used, and select the proper

combination for your application• regularly inspect your casters• properly maintain your castersThe information below and on the following page is intended as a guide to assist you in specifying, operating, and maintaining casters for safety and maximum life. Please read this information carefully.

LOAD WEIGHT AND WHEEL SIZEThe first consideration of caster selection is to determine the combined weight of equipment and maximum load. Generally, the greater the combined weight, the larger the wheel must be. Larger wheels distrib-ute weight and roll more easily. To determine the load capacity for

each wheel, divide the combined weight of equipment and maximum load by the number of casters to be used. This is the weight that each caster and wheel must support. Even though Jarvis' load ratings include a safety factor, always select a cast-er and wheel that are rated for a capacity greater than the calculated load per caster. It is important to select casters with extra load capacity to allow for unusual circum-stances. There may be other considerations which affect the size of thewheel you should select. Some of these are: floor condition, environment (wet, oily, corrosive, etc.), braking needs, appearance, and quiet ride. Your industry consultant or engineering department should determine whether there are specific regulations or other factors to consider. Unless there are other considerations, follow these gen-eral sizing guidelines for wheel diameter:• for short travel in confined areas with hand-pushed equipment: 3-4" diameter• for longer travel with hand-pushed equipment: 5-6-8" diameter• for conveyor-towed trucks, at speeds up to 3 mph: 6-8" diameter with nut and

bolt kingpin• for tractor-towed equipment used outdoors: 10" minimum - contact the factory

with your specifications

IMPORTANT NOTICE

Selecting the correct caster for your application is very important. If you do not select the correct caster, you or the users of your equipment could be injured. If you are not absolutely sure which caster is the correct one for your use, contact a safety or engineering consultant who knows your equipment and its intended use to assist you.

WHEEL BEARINGSThere are various types of wheel bearings available. Have your consultant or engineer determine which bearing type is appropriate for your specific application. The follow-ing is some basic information about each type of wheel bearing.Self-lube Sintered Iron is an economical oil-impregnated bearing suited for light loads, or heavier loads that are stationary most of the time. liquids, solvents, or sprays are used, select medium- or heavy-duty industrial grease-sealed casters.

CASTER INDUSTRIES • (714) 848-4118 • Fax: (714) 848-6240 • www.casterindustries.com • Email: [email protected]

SAFETY AND MAINTENANCE TIPSBadly worn or "chunked out" rubber tires can also cause erratic steering, bumping, load shifting, and floor damage. Replacement wheels and bearings should be kept on hand to reduce costly downtime.After wheels have been inspected and repaired, be sure the axle nut is properly tightened. Use lockwashers or locknuts on all axles. If the caster axle is loose, tight-en immediately. The wheel may be damaged or lock up if it is cocked in the caster horn.CASTERS

Check the swivel assembly to see if there is excessive play due to wear. If the swivel assembly is loose, it is advisable to replace it (fork or rig) or the entire caster. If the caster has a king bolt and nut, make sure it is fastened securely. If the swivel does not turn freely, check for corrosion or dirt binding the raceways. Again, it may be necessary to replace the

swivel assembly or the entire caster.If the equipment has rigid or stationary casters at one end, make sure that the cast-er horns are not bent or distorted.BRAKESCheck brakes and locks for proper operation. It is recommended that scaffold caster

brakes be tested daily or before each use of the equipment. Apply brakes one at a time and attempt to move the equipment to make sure that each brake is not slipping or loose. If brakes slip due to worn or damaged wheels, replace the wheels immediately, and re-test the brakes. If the brake mechanism itself is not operating properly, repair

or replace it.Always re-test brakes immediately after repairs or replacement,before returning equipment to use.Caster Industries, Inc. offers a wide selection of brakes and locks. Contact the factory for further information.TOWING - POWER OPERATIONPower driven equipment, whether it is by a tow line, tractor drawn, or mechanically moved by conveyor, will require casters specifically designed for this use. Series

which are compatible with this type of operation are so specified with-in this catalog, but consultation with the factory is recommended to ensure the proper caster for each specific towing or power driven equipment application.

THE MOST IMPORTANT SAFETY TIP IS PROPER MAINTENANCE ITSELFUsers are responsible for the proper operation and maintenance of the manual material handling equipment they use. Some equipment will quickly become dam-aged and unsafe if abused or subjected to improper demands. If equipment is regu-larly maintained and not abused, you will get the maximum safety and service per-formance from your casters.• Do not overload equipment• Do not drop heavy loads on carts or trucks• Do not use at high speedsThese uses create severe impact and shock loads that may lead to wheel and equip-ment failure.

FRAMES AND FASTENERSPeriodically turn the equipment on its end or side and check the follow-ing:• Look for broken welds or deck boards.• Tighten loose bolts and nuts.

• Look for frame distortion caused by overloads and impact loads. Distorted frames can lead to wheel failure by placing disproportionate loads on one or two casters.

• If casters are stem types (bolted or riveted in place), make certain that the legs of the equipment are not bent, and that mounting bolts are securely fastened.

• Always use locknuts or lockwashers in mounting casters.• Be sure casters with expanding applicators in tubular equipment are held firmly

in place.

IMPORTANT NOTICE

If you are using casters as a component part on equipment for resale, you must advise and pass this information along to those who purchase the equipment. You should place the proper instructions on your product to relay this information to the user.

LUBRICATIONLubrication is essential. The lubrication schedule depends on your spe-cific application. Normal conditions may warrant lubrication every six months, but monthly lubrication may be necessary for applications in wet or corrosive environments. Lubrication may be required after each

cart washing. Special high temperature, waterresistant lubricants must be used for these applications. can provide stainless steel casters that require less maintenance in frequent cart-washing applications. Regular lubrication adds to the life of wheel and swivel bearings. A little lube spill-over to friction points on the wheel hub, thrust washer, and leg surface of straight roller bearing systems reduces drag and improves rollability.

WHEELSCheck wheels for visible tread wear. Flat spots may indicate accumula-tion of foreign material, such as string or thread, which can cause the wheel to bind. Remove the axle bolt and nut. Clean out foreign material and check internal components for wear or failure. Re-assemble if the

parts are not damaged. Thread guards may be installed to delay build-up if foreign material is a continuing problem.Loose casters and frozen wheels can also cause flat spots. Proper maintenance, espe-cially tightening of bolts, proper lubrication, and replacement of damaged casters will enhance equipment rollability and tracking performance.

CASTER INDUSTRIES • (714) 848-4118 • Fax: (714) 848-6240 • www.casterindustries.com • Email: [email protected] CASTER INDUSTRIES • (714) 848-4118 • Fax: (714) 848-6240 • www.casterindustries.com • Email: [email protected]

STANDARD FEATURES: • Zincplated.• Fulldoubleballraceway,hardenedtoresistwear.• Yokeassemblyformedfromheavilyembossedsteel.• Kingpinhydraulicallyupsettoincreaseshockabsorption.• Varietyoffastenings.• Rivetedaxle.

10 SERIES LIGHT DUTY CASTERS


Capacity: 66-100 lbs.

APPLICATION • Officeequipment. • Typewriterstands.• Displayracksandstands.

This series is NSF Listed. Please call for information

WHEEL DIA.

WHEEL WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

SWIVEL RADIUS

CASTER PART NUMBER

2 13/16

SoftRubber Nylon 66

1-13/16

210-01PHardRubber Nylon 77 210-02PPolyurethane Nylon 66 210-12P

Mirage Nylon 66 210-25P

2-1/2 13/16SoftRubber Nylon 77

2-1/162510-01P

HardRubber Nylon 79 2510-02P

3 13/16

SoftRubber Nylon 99

2-3/8

310-01PHardRubber Nylon 110 310-02PPolyurethane Nylon 100 310-12P

Mirage Nylon 100 310-25P

TYPE CODESIZE (inch) OVERALL HEIGHT (inch)

OVERALL HOLE SPACING ATTACHING BOLT 2 2-1/2 3TopPlate 01 1-1/4x2-1/16 13/16x1-9/16 3/16 2-5/8 3-1/8 3-5/8

HoleSpacing11 7/16x1-3/16

2-5/8 3-1/8 3-5/812 7/16x1-7/18

ThreadedStem

21 5/16-18x1

2-11/16 3-3/16 3-11/1624 3/8-16x1-1/425 3/8-16x1-1/226 3/8-16x1/2

CODE DESCRIPTION

VLB Verti-LockBrake

CR ChromePlating

Add selected code or codes to the end of part number.

10 SERIES SPECIFICATIONS

FASTENERS FOR SERIES 10

OPTIONS FOR SERIES 10

FASTENERS FOR SERIES 12

OPTIONS FOR SERIES 12


12 SERIES SPECIFICATIONS


12 SERIES LIGHT DUTY CASTERSCapacity: 90-150 lbs.

TYPE CODESIZE (inch) OVERALL HEIGHT (inch)

OVERALL HOLE SPACING ATTACHING BOLT 2 3TopPlate 01 2-3/4x3-3/4 1-3/4x2-15/16 5/16 2-5/8 3-5/8

GripRingStem 11 7/16x1-1/2 2-13/16 3-7/8

ThreadedStem21 5/16-18x1

2-7/8 3-7/823 3/8-16x124 3/8-16x1-1/4

RoundPlainStem 25 7/8x1-7/8with1/4crossdrilledhole 2-11/16 3-3/4

CODE DESCRIPTION

VLB Verti-LockBrake

CR ChromePlating

BX BlackOxidePlating

STANDARD FEATURES: • Fulldoubleballbearingraceway• Higher-than-averageloadcapacitiesforalightdutycaster.

• Zincplatedfinish• Axleandnutdesignforwheelassembly• Widevarietyoffastenings.

APPLICATION • Enginestands,toolcabinetes,machiningtable

This series is NSF Listed. Please call for information

WHEEL DIA. WHEEL WIDTH WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

SWIVEL RADIUS

CASTER PART NUMBER

2(50.8) 15/16

SoftRubber Nylon 90

2

212-01PHardRubber Nylon 125 212-02P

LightDutyPlastic Plain 125 212-06PSteel Plain 125 212-03P

Polyurethane Plain 90 212-12P

3(76.2) 15/16SoftRubber Nylon 100

2/3/08312-01P

HardRubber Nylon 150 312-02PLightDutyPlastic Plain 150 312-06P

14-15 SERIES LIGHT DUTY INDUSTRIAL CASTERS

STANDARD FEATURES:

• Exceptionaleaseofuseandquietnessintheswiveloperation.

• Zincplated.• Sealinracewayhelpsguardagainstdust,dirt,etc.

• Ballbearingsinthe4”and5”wheelsaddextramaneuverability.

• Octagonaluppercupstandardonthreadedstemcasters.

APPLICATION • Servicecartsforhotel,hospitals,restaurants,etc.

• Bakeryracks• Lightdutystockcarts.

SERIES 14Note:Pleaseaddpropersuffixnumberfortopplatesizedesired

fromchart.

SERIES 15Note:Pleaseaddpropersuffixnumberfortopplatesizedesired

fromchart.


WHEEL CAPACITY LOAD HEIGHT

SWIVEL RADIUS

CASTER ORDERING NUMBER

DIAMETER TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SWIVEL RIGID

3(76.2) 1

SoftRubber Nylon 100

3-3/4 2-5/8

314-01P 315-01PHardRubber Nylon 125 314-02P 315-02PLightDutyPlastic PLain 125 314-06P 315-06PMirrageRubber Plain 100 314-25P 315-25P

4(101.6) 1


4-3/4 3-1/8

414-01P 315-01PSoftRubber Ball 125 414-01B 415-01BHardRubber Nylon 140 414-02P 415-02PHardRubber Ball 140 414-02B 415-02BLightDutyPlastic Plain 175 414-06P 415-06PHeavyDutyPlastic Plain 220 414-07P 415-07PMirageRubber Plain 125 414-25P 415-25P

5(127) 1


5-3/4 3-11/16

514-01P 515-01PSoftRubber Ball 135 514-01B 515-01BHardRubber Nylon 145 514-02P 515-02PHardRubber Ball 145 514-02B 515-02BLightDutyPlastic Plain 200 514-06P 515-06PHeavyDutyPlastic Plain 220 514-07P 515-07PMirageRubber Plain 135 514-25P 515-25P

14-15 SERIES SPECIFICATIONS

FASTENERS FOR SERIES 14-15

OPTIONS FOR 14-15 SERIES

STANDARD FEATURES:

• Exceptionaleaseofuseandquietnessintheswiveloperation.

• Zincplated.• Sealinracewayhelpsguardagainstdust,dirt,etc.

• Ballbearingsinthe4”and5”wheelsaddextramaneuverability.

• Octagonaluppercupstandardonthreadedstemcasters.

APPLICATION • Servicecartsforhotel,hospitals,restaurants,etc.

• Bakeryracks• Lightdutystockcarts.


TYPE CODEFASTENING SIZE (inch)

OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLTTopPlate 01 2-3/4x3-3/4 1-3/4x2-7/8to3 5/16

GripRingStem 11 7/16x1-1/2

ThreadedStem21 1/2-13x1-1/222 7/16-14x2-1/4

Round Plain Stem 31 7/8x1-7/16crossdrilledhole29/32up

CODE DESCRIPTION

VLB Verti-Brake

CR ChromePlating

TG ThreadGuards(onballbearingwheelsonly)

CR HexNutBase(Threadedstemonly)

20-21 SERIES GENERAL DUTY CASTERS

FEATURES•Deeplyembossed,formedsteeltopplateandyoke.•Singlerowballbearingswivelraceway.•Corrosion-resistantzincplatedfinish.•Simplesidelockingbrakesystem.•HardenedRaceway.

APPLICATIONS:•Widelyuseinfactoriesandwarehousesonfurnituredollies,platformtrucks,etc.


FASTENING SPECIFICATIONS FOR 20-21 SERIESCASTER PART

NO WHEEL SIZEFASTENING FASTENING SPECIFICATION

TYPE SHAPE OVERALL SIZE BOLT HOLE SPACING BOLT SIZESWIVEL

TOPPLATOPPLATE

TE

220 2 1-7/8x2-9/16 15/16x2-1/8 1/4

2520 21/2 2-3/4x3-27/32 1-3/4x3 5/16

320 3 3-1/8x4-1/16 2-3/8x3-11/32to3-7/16 5/16

420 4 4x5-1/18 3x4 3/8

RIGID

TOPPLATE

221 2 1-1/2x2-21/32 15/16x2-1/8 1/4

2521 21/2 2-1/4x4-7/16 1-1/16x3-1/2 5/16

321 3 2-1/2x4-7/8 1-3/16x3-7/8to4 5/16

421 4 2-3/4x6 1-3/4x4-15/16to5 3/8



WHEEL SPECIFICATION CASTER SPECIFICATION CASTER PART NUMBER

DIA TREAD WIDTH TYPE BEARING AXLE

DIAOVERALL HEIGHT

SWIVEL RADIUS

LOAD CAPACITY SWIVEL RIGID

2 15/16

SoftRubber Nylon

1/4 2-7/16 1-3/4

90 220-01P 221-01PHardRubber Nylon 125 220-02P 221-02P

LightDutyPlastic Plain 125 220-06P 221-06PPolyurethane Plain 125 220-12P 221-12P

Steel Plain 125 220-03P 221-03P

2-1/2 1-1/8

SoftRubber Nylon

5/16 3-1/4 2-3/8

100 2520-01P 2521-01P

HardRubber Nylon 200 2520-02P 2521-02PLightDutyPlastic Plain 175 2520-06P 2521-06PPolyurethane Plain 135 2520-12P 2521-12P

Steel Plain 200 2520-03P 2521-03P

3 1-1/4

SoftRubber Nylon

3/8 3-13/16 2-7/16

125 320-01P 321-01P

SoftRubber Ball 125 320-01B 321-01BHardRubber Nylon 220 320-02P 321-02PHardRubber Ball 220 320-02B 321-02B

LightDutyPlastic Plain 220 320-06P 321-06PHeavyDutyPlastic Plain 250 320-07P 321-07P

Polyurethane Plain 165 320-12P 321-12PPolyurethane Ball 220 320-12B 321-12B

Steel Plain 250 320-03P 321-03PGrayRubber Annular 250 320-25B 321-25B

4 1-1/4

SoftRubber Nylon

7/16 5 3-1/4

200 420-01P 421-01PHardRubber Nylon 300 420-02P 421-02P

Steel Plain 300 420-03P 421-03PHeavyDutyPlastic Plain 300 420-07P 421-07P

ACCESSORIES OPTIONS FOR 20 SERIESCODE DESCRIPTION

SB SideLockBrake(SR,HR,PUonly)

SO Shortoffset(3"isstandard)

TG ThreadGuard(3"SBB,HBBandPBonly)

BO BlackOxidePlating

BP BrassPlating

CP ChromePlating

NI NickelPlating

25-26 SERIES LIGHT MEDIUM DUTY CASTERS

STANDARD FEATURES:• Yoke Assembly formed from heavily embossed

steel• 1/2" king pin hydraulically upset to increase

shock absorbing capacity • Zinc Plated • A variety of plates and fastenings for nearly

every need

APPLICATION:• Stock carts• Bakery racks• Food service equipment

FASTENING SPECIFICATIONS FOR 25-26 SERIES

ACCESSORIES OPTIONS FOR 25-26 SERIES




FASTENING TYPE CODEFASTENING CODE NO.

OVERALL HOLE SPACING ATTACHING BOLT SIZE

Top Plate01 2-1/2 x 3-3/4 1-3/4 x 2-7/8 to 3 x 3 5/1602 3-3/4 x 4 1/2 2-5/8 x 3-5/8 to 3 x 3 3/803 3-1/8 x 4-1/8 1-3/4 x 3 to 2-3/8 x 33/8 5/16

Threaded Stem( Available on Swivels Only)

21 1/2-13 x 122 1/2-13 x 1-1/2

Round Plain Stem31 7/8 x 2-3/16 with 5/16 cross drilled hole 15/16 up32 0.865 x 1-3/4

Octagon Stem 41 27/32 x 2-7/16 with 3 cross drilled holes

CODE DESCRIPTIONVLB Vertelock Brake

TG Thread Guard

ZA Zerk Axle

SL Sealed Swivel

EP Expanded Applicator

CP Chrome Platin

NI Nickel Plating

SPECIFICATIONS FOR 25-26 SERIES


WHEEL LOAD HEIGHT

SWIVEL RADIUS

CASTER ORDERING NUMBER CAPACITY

DIA. TREAD WIDTH TYPE BEARING AXLE

DIA INCHES INCHES SWIVEL RIGID POUNDS

3 1- 1/4

Soft Rubber Nylon

3/84-1/4 2-3/4

325-01P 326-01P 125Soft Rubber Ball 325-01B 326-01B 125Hard Rubber Nylon 325-02P 326-02P 250Hard Rubber Ball 325-02B 326-02B 250

Light Duty Plastic Plain 325-06P 326-06P 220Heavy Duty Plastic Plain 325-07P 326-07P 250

Polyurethane/Plastic Plain 325-12P 326-12P 220Polyurethane/Plastic Ball 325-12B 326-12B 220Gray Rubber/Plastic Annular 325-25B 326-25B 220

Steel Plain 325-03P 326-03P 250Solid Polyurethane Plain 4-1/8 2-7/8 325-14P 326-14P 250

3-1/2 1- 1/4

Soft Rubber Nylon

3/8 5- 1/8 3-5/16

3525-01P 3526-01P 125Hard Rubber Nylon 3525-02P 3526-02P 250

Heavy Duty Plastic Plain 3525-07P 3526-07P 250Polyurethane/Plastic Ball 3525-12B 3526-12B 250Gray Rubber/Plastic Annular 3525-25B 3526-25B 230

Grey Rubber on Aluminum Annular 3525-09B 3526-09B 225

4 1- 1/4

Soft Rubber Nylon

3/85-1/8 3-5/16



Polyurethane Ball 425-12B 426-12B 265Grey rubber on Aluminum Annular 425-09B 426-09B 265

Gray Rubber/Plastic Annular 425-25B 426-25B 250Steel Plain 425-04P 426-04P 350

Solid Polyurethane Plain 5-1/16 3-1/2 425-14P 426-14P 300

5 1- 1/4

Soft Rubber Nylon

3/85-1/8 3-5/16



Polyurethane/Plastic Ball 525-12P 526-12P 265Gray Rubber/Plastic Annular 525-25B 526-25B 265

Grey Rubber on Aluminum Annular 525-09B 526-09B 265Solid Polyurethane Plain 6-1/8 4 525-14B 526-14B 350

28-29 SERIES SHOPPING CART CASTERS

FEATURES:• Finish: Bright zinc plating• Swivel: Double ball bearing raceways with seal• Keylock: Keylock standard with threaded stem• Axle: 5/16” diameter axle with lock nut

FASTENING TYPE CODE SIZE (inch)Front Swivel Casters

Threaded Stem21 1/2-13 x 9/16 with keylock22 1/2-20 x 3/4 with keylock29 1/2-13x1 with keylock

Rear Swivel or Rigid Casters

Round Plain Stem31 23/32 x 1-9/16 with 2 cross-drilled 1/4” holes at 3/8” and 1-1/4’ up from base32 13/16 x 1-9/16 with 2 cross-drilled 1/4” holes at 3/8” and 1-1/4’ up from base34 0.860 x 1-3/4 with 1 cross-drilled 1/4” hole 1-3/16” up from base

WHEELDIAMETER

THREAD WIDTH

WHEEL TYPE

SWIVEL NUMBER

RIGID NUMBER

WHEEL BEARING

LOAD CAPACITY (lbs.)

OVERALL HEIGHT

SWIVEL RADIUS

4 1-1/4

Polyurethane 428-12B 429-12B Ball230

5-3/16 3-3/16Polyurethane 428-12CB 429-12CB Center BallSoft Rubber 428-01B 429-01P Nylon

200Soft Rubber 428-01B 429-01B Ball

5 1-1/4

Polyurethane 528-12B 529-12B Ball250

5-7/8 3-11/16Polyurethane 528-12CB 529-12CB Center BallSoft Rubber 528-01P 529-01P Nylon

200Soft Rubber 528-01B 529-01B Ball

Repace-**-in part number with apprpriate fastening code. Add Option Code to end of part number

FASTENING SPECIFICATIONS FOR 28-29 SERIES



CODE DESCRIPTIONTG Plastic Thread Guards

OPTIONS FOR 28 -29 SERIES

FEATURES• Heavily embossed, formed steel upper and lower cup.• Double ball race construction. • Raceways and yoke hardened for extra strength.• Dust cover helps protect swivel bearings.• Finish: Bright zinc or chrome plated.

APPLICATIONS:• Stock carts, bakery racks, food service equipment, etc.• Audio Equipment

FASTENING SPECIFICATIONS


OPTIONS FOR 28 -29 SERIES

30-31 LIGHT MEDIUM DUTY CASTERS



Top Plate01 2-1/2 x 3-5/8 1-3/4 x 2-15/16 5/1602 3-1/8 x 4-3/32 2-3/8 x 3-7/8 (Swivels only) 5/16

SWIVELS ONLYGrip Ring Stem 12 0.845 x 2-3/16

Threaded Stem21 1/2-13 x 122 1/2-13 x 1-1/223 1/2-13 x 2-3/16

Round Plain Stem31 7/8 x 1-3/4 (without hole)32 0.845 x 2-3/8 with 1/4 cross drill hole 1-5/16 up

Square Stem51 7/8 x 252 7/8 x 2-1/2

CODE RANGE I.D. OF TUBING

Expanding Stems

9 .720 - .851 3/4"11 .852 - .927 7/8"13 .928 - 1.029 1"15 1.030 - 1.140 1 1/8"

19C 1.360 - 1.425 1 3/8"19A 1.426 - 1.589 1 1/2"

ACCESSORIES OPTIONS FOR 30 AND 31 SERIES

SPECIFICATIONS FOR 30 AND 31 SERIES


WHEEL LOAD HEIGHT

SWIVEL RADIUS


DIA. TREAD WIDTH TYPE BEARING AXLE

DIA INCHES INCHES SWIVEL RIGID POUNDS

3 1-1/4

Soft Rubber Nylon

3/8 4-1/4 2-3/4



Polyurethane/Plastic Plain 330-12P 331-12P 220Polyurethane/Plastic Ball 330-12B 331-12B 220Solid Polyurethane Plain 330-14P 331-14P 250Gray Rubber/Plastic Annular 330-25B 31-25B 220

Steel Plain 330-04P 331-04P 250

3/1/02 1-1/4

Soft Rubber Nylon

3/8 4-11/16 3-1/16

3530-01P 3531-01P 125Hard Rubber Nylon 3530-02P 3531-02P 250

Heavy Duty Plastic Plain 3530-07P 3531-07P 250Polyurethane/Plastic Ball 3530-12B 3531-12B 250Gray Rubber/Plastic Annular 3530-25B 3531-25B 2 30


4 1-1/4

Soft Rubber Nylon

3/8 5-1/2 3-5/16



Polyurethane/Plastic Ball 430-12B 431-12B 265Solid Polyurethane Plain 430-14P 431-14P 300

Grey rubber on Aluminum Annular 430-09B 431-09B 265Gray Rubber/Plastic Annular 430-25B 431-25B 250

Steel Plain 430-04P 431-04P 350

5 1-1/4

Soft Rubber Nylon

3/8 6-3/16 4



Polyurethane/Plastic Ball 530-12P 531-12P 265Solid Polyurethane Plain 530-14P 531-14P 350Gray Rubber/Plastic Annular 530-25B 531-25B 265



TG Thread Guard

ZA Zerk Axle

CODE DESCRIPTIONSL Sealed Swivel

CP Chrome Platin

NI Nickel Plating


45-46 SERIES MEDIUM DUTY CASTERS

• Hardened raceway for strenght• Corrosion-resistant zinc plate finish• Nut and bolt king pin• Zerk fittings in wheel and swivel bearings• Legs welded by machine for uniform consistency and strenght• Wide selection of wheels for a wide selection of applications• Swivel radius is set for maximum maneuverability under

a full load• 2" fork spacing• Ideal for: Stock Carts, Platform Trucks, Wire Shelving Units,

Warehouses, Factories, Heavy Appliances (ovens, freezer, etc.)• Heavy foodservice equipment

SPECIFICATIONS FOR 40 SERIES



SWIVEL RADIUS


DIA. TREAD WIDTH TYPE BEAR-

ING POUNDS INCHES INCHES SWIVEL RIGID

4 (101.6) 1 1/2

Rubber/Cast Iron Roller 300

5-5/8 3-9/16

445-08R 446-08RPolyurethane Roller 600 445-10R 446-10R

Heavy Duty Plastic Ball 450 445-07R 446-07R

Phenolic Roller 600 445-05R 446-05RV-Groove steel Roller 600 445-13R 446-13R

5 (127) 1 1 /2


6-1/2 4 1/4


Heavy duty Plastic Ball 550 545-07R 546-07RPhenolic Roller 750 545-05R 546-05R

6 (152) 1 1/2


7-1/2 5


Heavy Duty Plastic Ball 600 645-07R 646-07RPhenolic Roller 750 645-05R 646-05R


OVERALL HOLE SPACING ATTACHING BOLT SIZETop Plate 01 4 x 4-1/2 2-5/8 x 3-5/8 To 3 x 3 3/8

50-51 SERIES MEDIUM HEAVY DUTY CASTERS

FEATURES• "Cold froged" top plate, upper and lower raceways. • Double row ball bearing swivel raceway construction for extra

strength.• Hardened Raceways.• Zerk fitting in swivel race for lubrication.• Finish: All parts except wheel are zinc plated for corrosion resis-

tance.• Legs are formed and welded to upper race to increase strength • 5/8 Dia King pin, 1/2 Axle, 1/4 Plate & Leg Thickness.


APPLICATIONS:• Stock carts, bakery racks, food service

equipment, etc.• Audio Equipment

ACCESSORIES OPTIONS FOR 50 AND 51 SERIES



Capacity: 350-470 lbs. Capacity: 350-1,000 lbs.

FASTENING TYPE CODE

FASTENING CODE NO.OVERALL HOLE SPACING ATTACHING BOLT SIZE

Top Plate

01 4 x 4 1/2 2-5/8 x 3-5/8 to 3 x 3 3/802 4-1/2 x 6-1/4 2-7/16 x 4-15/16 to 3-3/8 x 5-1/4 1/203 5 x 5-1/2 4 x 4-1/8 1/204 4 x 5 3 x 4 to 2-9/16 x 3-1/2 (Reverse slot Pattern) 3/8 (Busse Basket Plate)


TG Thread Guard

DW Double WeldedSL Sealed Swivel

SWL 4-PositionSwivel Lock

ZA Zerk AxleBB Ball Bearing

RW Retainer Washer

SPECIFICATIONS FOR 50 AND 51 SERIES


WHEEL LOAD HEIGHT

SWIVEL RADIUS


DIA. TREAD WIDTH TYPE BEARING A XLE DIA INCHES INCHES SWIVEL RIGID POUNDS

4 2

Rubber/Cast Iron Roller

1/2 5-5/8 3-3/16

450-08R 451-08R 300Polyurethane/Cast Iron Roller 450-10R 451-10R 800Polyurethane/Plastic Roller 450-12R 451-12R 500Heavy Duty Plastic Roller 450-07R 451-07R 450

Phenolic Roller 450-05R 451-05R 800Steel Roller 450-03R 451-03R 800

V-Groove Roller 450-13R 451-13R 700Gray Rubber/Plastic Roller 450-25R 451-25R 350Rubber/Aluminum Roller 1/2 5 5/8 3 9/16

450-11R 451-11R 300Solid Polyurethane 450-14R 451-14R 900

Polyurethane/Plastic PR-BB 450-30B 451-30B 800

5 2


1/2 6-1/2

3-7/8

550-08R 551-08R 375Polyurethane/Cast Iron Roller 550-10R 551-10R 1000

Polyurethane/Plastic Roller 550-12R 551-12R 600Heavy Duty Plastic Roller 550-07R 551-07R 550Extra Heavy /Duty

Plastic Roller 550-X7R 551-X7R 800


V-Groove Roller 550-13R 551-13R 1000Gray Rubber/Plastic Roller 550-25R 551-25R 400Rubber/Aluminum Roller 4 1/4


Polyurethane/Plastic PR-BB 550-30B 551-30B 900

6 2


1/2 7-1/2

4-37/64

650-08R 651-08R 410Polyurethane/Cast Iron Roller 650-10R 651-10R 1000Polyurethane/Plastic Roller 650-12R 651-12R 800Heavy Duty Plastic Roller 650-07R 651-07R 650Extra Heavy /Duty

Plastic Roller 650-X7R 651-X7R 800


V-Groove Rollerr 650-13R 651-13R 1200Gray Rubber/Plastic Roller 650-25R 651-25R 500Rubber/Aluminum

Roller4 1/2


Polyurethane/Plastic PRBB 650-30B 651-30B 1000

8 2


1/2 9-1/2

6

850-08R 851-08R 500Polyurethane/Cast Iron Roller 850-10R 851-10R 1000

Polyurethane/Plastic Roller 850-12R 851-12R 1000Heavy Duty Plastic Roller 850-07R 851-07R 800

Extra Heavy/Duty Plastic Roller 850-X7R 851-X7R 1000Phenolic Roller 850-05R 851-05R 1000

Steel Roller 850-03R 851-03R 1200V-Groove Roller 850-13R 851-13R 1200

Gray Rubber/Plastic Roller 850-25R 851-25R 600Rubber/Aluminum

Roller 6 1/2850-11R 851-11R 500

Solid Polyurethane 850-14R 851-14R 1250Polyurethane/Plastic PRBB 850-30B 851-30B 1000

50 SERIES MEDIUM HEAVY DUTY - PNEUMATIC WHEEL CASTERS

FEATURES• "Cold froged" top plate upper and lower

Raceways • Double row ball bearing swivel raceway con-

struction for extra strength.• Hardened Raceways.• Zerk fitting in swivel race for lubrication.• Finish: All parts except wheel are zinc plated

for corrosion resistance.• Legs are formed and welded to upper raceway

for increased strength • These are available with Black or Grey Non-

Marking Tread wheel.


ACCESSORIES OPTIONS FOR 50 SERIES

APPLICATIONS:• Cargo containers, food handling equipment, etc.




FASTENING SPECIFICATIONS FOR 50 SERIES


SWIVEL RADIUS


DIA. TREAD WIDTH TYPE BEARING AXLE DIA POUNDS INCHES INCHES SWIVEL RIGID

8 2-1/2 Pneumatic Ball 1/2 350 10 6-5/8 850-22B 851-22B

10 3-1/2 Pneumatic Ball 1/2 470 12 6-1/4 1050-22B 1051-22B



Top Plate01 4 x 4 1/2 2-5/8 x 3-5/8 to 3/3 3/802 4-1/2 x 6-1/4 2-7/16 x 4-15/16 to 3-3/8 x 5-1/4 1/203 5 x 5-1/2 4 x 4-1/8 1/2


55-56 SERIES MEDIUM / HEAVY DUTY CASTERS


Capacity: 350-1,400 lbs.

• Large top plate and raceways combine ease of swiveling and strength

• Corrosion-resistant zinc plated finish• Nut and bolt king pin• Zerk fitings in wheel and swivel bearings• Legs welded by machine for uniform

consistency and strength• 2 1/2 fork spacing• Applications include: Large platform trucks,

Freight terminal trucks, Cargo containers, Drying racks



SWIVEL RADIUS


DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SWIVEL RIGID

4 2


5-5/8 3-13/16

455-08R 456-08RPolyurethane/CI Roller 700 455-10R 456-10R

Heavy Duty Plastic Roller 500 455-07R 456-07RPhenolic Roller 700 455-05R 456-05R

Steel Roller 700 455-03R 456-03RV-Groove steel Roller 700 455-13R 456-13R

Gray Rubber/Plastic Roller 300 455-25R 456-25RSolid Polyurethane Roller 700 3-9/16 455-14R 456-14R

5 2


6-1/2 4


Polyurethane on Plastic Roller 500 555-12R 556-12RHeavy duty Plastic Roller 600 555-07R 556-07R

Phenolic Roller 1000 555-05R 556-05RSteel Roller 1000 555-03R 556-03R

V-Groove steel Roller 1000 555-13R 556-13RGray Rubber/Plastic Roller 350 555-25R 556-25R

Rubber/Cast Iron Roller 440 655-08R 656-08RSolid Polyurethane Roller 900 4-1/4 555-14R 556-14R

6 2

Rubber/Aluminum Roller 440

7-1/2 4-3/4


Polyurethane on Plastic Roller 650 655-12R 656-12RHeavy Duty Plastic Roller 700 655-07R 656-07R


V-Groove steel Roller 1200 655-13R 656-13RGray Rubber/Plastic Roller 410 655-25R 656-25RSolid Polyurethane Roller 900 4-1/2 655-14R 656-14R

8 2


9-3/4 6-1/4

855-08R 856-08RRubber/Aluminum Roller 500 855-09R 856-09RPolyurethane/CI Roller 1400 855-10R 856-10R

Polyurethane on Plastic Roller 750 855-12R 856-12RPhenolic Roller 1400 855-05R 856-05R

Steel Roller 1400 855-03R 856-03RGray Rubber/Plastic Roller 500 855-25R 856-25RSolid Polyurethane Roller 1000 9-1/2 6-1/2 855-14R 856-14R



OPTIONS FOR 55 AND 56 SERIES

FASTENING TYPEFASTENING SPECIFICATION

OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZETop Plate 4-1/2 x 6-1/4 2-7/16 x 4-15/16 to 3-3/8 x 5-1/4 3/8


CODE DESCRIPTIONDW Double Welded

VLB Vertelock Brake


57-58 SERIES BUSINESS MACHINE CASTERS

WHEELDIAMETER

TREAD WIDTH

WHEEL TYPE SWIVELNUMBER

WHEEL BEARING

LOAD CAPACITY(lbs.)

OVERALLHEIGHT

SWIVELRADIUS

Standard Duty - up to 600 lbs.

31-13/16

Phenolic 380-05R Roller600 1-1/16 2-5/16Heavy Duty Plastic 380-07P Plain

Glass-Filled Nylon 380-30R Roller4 Heavy Duty Plastic 428-07B Ball 700 5-1/8 3-5/32

Heavy Duty - up to 1000 lbs.

3 1-13/16Phenolic 385-05R Roller 1000

4-1/4 2-5/16Glass-Filled Nylon 385-30R Roller 1000

Capacity up to 1000 lbs.



STANDARD FEATURES:• Finish: Bright zinc plating• Swivel: Double ball bearing raceways• Construction: Provides floor protection

and excellent mobility• SLB: Side Lock Brake standard• Axle: Standard: 5/16” diameter axle with

lock nut• Heavy Duty: 1/2” diameter axle with lock

nut• Top Plate Thickness: Standard 5/32”,

Heavy duty 1/4”

APPLICATIONS:• Office Equipment• Business and Vending Machines

CASTER OPTIONS:• HD: Heavy Duty

HD: Heavy Duty


OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZETop Plate 4-1/2 x 6-1/4 2-7/16 x 4-15/16 to 3-3/8 x 5-1/4 3/8



OPTIONS FOR 60 SERIES


60 SERIES LOW-PROFILE MACHINE CASTERS

TYPE CODE SIZE (inch)

Top Plate

01Overall Size 2-3/4 x 3-3/4

Bolt Hole Spacing 1-3/4 x 2-7/8Attaching Bolt Size 5/16

02

Overall Size 1-7/8 x 2-9/16

Bolt Hole Spacing 15/16 x 2-1/8

Attaching Bolt Size 1/4

Grip Ring Stem 11 7/16 x 1-7/16

Thraded Stem21 1/2-13 x 1-1/2

22 3/8-16 x 3/4

WHEELDIAMETER

TREAD WIDTH

WHEEL TYPE SWIVELNUMBER

WHEEL BEARING

LOAD CAPACITY(lbs.)

OVERALLHEIGHT

SWIVELRADIUS

2 1-11/16 Heavy Duty Plastic 260-07P Plain 300 2-13/16 1-7/8

2 3/4 eachMirage (TPR) 2260-25P

Plain160

2-13/16 1-7/8Soft Rubber 2260-01PHard Rubber 2260-02P 200

Capacity up to 300 lbs.

CODE DESCRIPTIONCR Chrome Plat inAC Antique CopperTSB Thumb Screw BrakeSLB Side Lock Brake

2260-02P-21 2260-02-01

FEATURES:• Finish: Bright zinc plating• Swivel: Double ball bearing raceways• Construction: Low-profile design• Axle: 5/16” diameter axle with lock nut

APPLICATIONS:• Office Equipment• Display Stand Racks• Institutional Equipment• Light Duty Vending Machines

CASTER OPTIONS:• SLB: Side Lock Brake

SLB: Side Lock Brake

260-07P

70-71 SERIES HEAVY DUTY CASTERS

• Largetopplateandracewayscombineeaseofswivelingandstrength.

• Corrosion-resistantzincplatedfinish.• 3/4"nutandboltkingpin.• Zerkfittingsinwheelandswivelbearings.• Legsweldedbymachineforuniformconsistencyandstrength.

• 3"forkspacing(Legthickness:23/64").• 3/4"diameteraxleandlocknut.

APPLICATION:• Largeplatformtrucks.• Freightterminaltrucks.• Cargocontainers.• Dryingracks.




To order, add code to the end of part number.



SWIVEL RADIUS



6 2-1/2

Rubber/CastIron Roller 600

7-1/2 4-3/4

670-08R 671-08RPolyurethane Roller 1600 670-10R 671-10RPhenolic Roller 1600 670-05R 671-05RSteel Roller 1600 670-03R 671-03R

8 2-1/2Rubber/CastIron Roller 600

9-3/4 61/2


Capacity 600-1,600 lbs.


OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZETop Plate 4-1/2x6-1/4 2-7/16x4-15/16to3-3/8x5-1/4 3/8

CODE DESCRIPTIONDW DoubleWelded

80-81 SERIES HEAVY DUTY DROP FORGED CASTERS



SWIVEL RADIUS



6 2-1/2


7-1/2 4-3/4


8 2-1/2Rubber/CastIron Roller 600

9-3/4 61/2


• Topplateandyokeassembly:AISI1045dropfrogedsteel.• Largetoplateprovideseaseofstabilityandstrength.•Corrosion-resistantzincplatedfinish.•3/4"nutandboltkingpin.•Zerkfittingsinwheelandswivelbeaings.•Legsaremachinewelded,engineeredandformedtoresistbending.(Legthickness:15/64")

•2-1/2"forkspacing.•Usingwork-hardenedandrolled-inprocessing,thedoubledeep-groovedloadandcomponentthrustswivelracewaysprovidefullswivelingopera-tionunderthemaximumloadwithoutlossoffunction.

•1/2"diameteraxleandlocknut.•Zerkfittingforlubricationinwheelandswivelbearings.


SWIVEL RADIUS



4 2


5-5/8 3-13/16


HeavyDutyPlastic Roller 500 480-07R 481-07RPhenolic Roller 700 480-05R 481-05RSteel Roller 700 480-03R 481-03R

V-Groovesteel Roller 700 480-13R 481-13RGrayRubber/Plastic Roller 300 480-25R 481-25RSolidPolyurethane Roller 600 3-9/16 480-14R 481-14R

5 2


6-1/24


PolyurethaneonPlastic Roller 500 580-12R 581-12RHeavydutyPlastic Roller 600 580-07R 581-07R


V-Groovesteel Roller 1000 580-13R 581-13RGrayRubber/Plastic Roller 350 580-25R 581-25RSolidPolyurethane Roller 800 4-1/4 580-14R 581-14R

6 2


7-1/2 4-3/4


PolyurethaneonPlastic Roller 650 680-12R 681-12RHeavyDutyPlastic Roller 700 680-07R 681-07R


V-Groovesteel Roller 1200 680-13R 681-13RMirageRubber Roller 410 680-25R 681-25R

SolidPolyurethane Roller 900 4-1/2 680-14R 681-14R

8 2


10-1/8 6-1/4


PolyurethaneonPlastic Roller 750 880-12R 881-12RPhenolic Roller 1400 880-05R 881-05RSteel Roller 1400 880-03R 881-03R

GrayRubber/Plastic Roller 500 880-25R 881-25RSolidPolyurethane Roller 1000 9-1/2 6-1/2 880-14R 881-14R




OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZETop Plate 4-1/2x6-1/4 2-7/16x4-15/16to3-3/8x5-1/4 3/8



CODE DESCRIPTIONDW DoubleWeldedForks.WB WheelBrake

To order, add code to the end of part number.

82-83 SERIES HEAVY DUTY DROP FORGED CASTERSFEATURES•Topplate:AISI1045dropforgedsteel.•3/4"KingpinAxle&nut.•Legsare3/8thick.•Heattreatedraceway,•Zincplatedforcorrosionresistance.

APPLICATIONS:•Heavydutycarts





DIA. DREAD WIDTH TYPE BEARING AXLA

DIAOVERALL HEIGHT

SWIVEL RADIUS


6 2-1/2

Rubber/CastIron Roller

3/4 7-1/2 4-7/8

550 682-08R 683-08RSteel Roller 1600 682-03R 683-03R

Polyurethane/CasterIron Roller 1600 682-10R 683-10RPhenollic Roller 1600 682-05R 683-05R

8 2-1/2


3/4 10-1/8 6-13/16



10 2-1/2


3/4 11-7/8 8-1/4




FASTENING TYPE FASTENING SHAPE

FASTENING SPECIFICATION

OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZE

Top Plate A1 2-7/16x4-15/16to3-3/8x5-1/4 1/2

CODE DESCRIPTIONVLB TopLockBrake(on/offType)TG ThreadGuard

86-87 SERIES HEAVY DUTY DROP FORGED CASTERS

FEATURES•Topplate:AISI1045dropforgedsteel.•3/4"KingPinAxle&Nut.•Legsare3/8thick.•Heattreatedraceway,•Zincplatedforcorrosionresistance.





FASTENING TYPE CODEFASTENING SPECIFICATION

OVERALL SIZE HOLE SPACING SLOTTED ATTACHING BOLT SIZETop Plate A1 5-1/4x7-1/4 4-1/8x6-1/8x6to3-3/8x5-1/4 3/4

APPLICATIONS:•SuperHeavydutycarts


DIA. DREAD WIDTH TYPE BEARING AXLA

DIAOVERALL HEIGHT

SWIVEL RADIUS


6 3


3/4 8 5-3/4

750 686-08R 687-08RPolyurethane/CasterIron Roller 2000 686-10R 687-10R

Phenollic Roller 2000 686-05R 687-05RSteel Roller 2500 686-03R 686-03R

8 3


3/4 10-1/8 6-3/4



10 3


3/4 121/1 7-1/2



12 3


3/4 15-1/2 9-1/4



TOP PLATE SIZES AND BOLT HOLE SPECIFICATIONS

90-91 SERIES HEAVY DUTY KINGPINLESS CASTERSSTANDARD FEATURES: • Swivelloadbearing–thisuniquedesignforgedswivelsectionwith3/8"dia.carbonsteelballsina23/8"dia.racewayaccommodatesboththrustandloadforcesbecauseofitskingpinlessdesign;theswivelracewayisprecisionmachinedandinductionhardened

• Finish–Brightzincplating• Topplateandforkbasearehotforgedsteelthathasbeeninductionhardenedtoensureuniformdepthofhardnessintheswivelraces

• Forklegsare1/4"thick,2"wideformedsteel,withinsideandoutsideweldsforextrastrength

• Wheelaxle–1/2"dia.axle,withlocknut• Forklegspacing-21/2"width• Sealingcapweldedtoouterraceassuresprotectionfromforeignmaterialandkeepsgreaseintheracearea

Series90-91castersaremadefromforgedsteel.Topplateandinnerracewayareforgedfromonepiece,providingasuperiorracewayconstructionforshockconditions.Thisforgeddesignoutperformsthestandardsteelplateweldedtotubularsteel innerraces,espe-ciallyinabusiveandimpact-loadingconditions


TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE4x41/2 25/8x35/8Slottedto3x3 3/8



SWIVEL RADIUS



4" 2"

Rubber/CastIron

Roller

400

55/8 33/16

490-08R 491-08RCastIron 800 490-03R 491-03R

Mold-onPoly/CastIron 800 490-10R 491-10RPhenolic 800 490-05R 491-05R

GrayRubber 350 490-25R 491-25RHeavyDutyPlastic 500 490-07R 491-07RSolidPolyurethane 1000 490-14R 491-14R

5" 2"

Rubber/CastIron

Roller

450

61/2 37/8

590-08R 591-08RCastIron 1000 590-03R 591-03R



6" 2"

Rubber/CastIron

Roller

550

71/2 49/16

690-08R 691-08RCastIron 1200 690-03R 691-03R



8" 2"

Rubber/CastIron

Roller

600

91/2 6

890-08R 891-08RCastIron 1400 890-03R 891-03R



93-94 SERIES HEAVY DUTY KINGPINLESS CASTERS

STANDARD FEATURES: • Kingpinlesscasterdesign-noswivelkingpintobendorbreak.Betterthanstandardcastersatwithstandingshockandimpact.Lastlonger,savesmoney.

• Basedonoriginalsuperiorpatenteddesign.• Dropforgedupperandlowercup.• Hardenedswivelraceway.Corrosion-resistantzincplatedfinish.• 3/4"wheelaxle&nut• Legthickness:23/64"• Double-weldedlegs,3-1/2"forkspacing• Largertopplateprovidesstability• Zerkfittingsinwheelandswivelrace• Optionalbrakeandswivellockavailable

Series93-94castersaremadefromforgedsteel.Topplateandinnerracewayareforgedfromonepiece,providingasuperiorracewayconstructionforshockconditions.Thisforgeddesignoutperformsthestandardsteelplateweldedtotubularsteel innerraces,espe-ciallyinabusiveandimpact-loadingconditions




SWIVEL RADIUS



6" 21/2"

CastIron

Roller

1600

711/16 53/32

693-03R 694-03RMold-onPoly/CastIron 1600 693-10R 694-10R

Phenolic 1600 693-05R 694-05RMold-onRubber 550 693-08R 694-08R

8" 21/2"

CastIron

Roller

2000

105/16 65/32



10" 21/2"

CastIron

Roller

2200

121/16 79/16



12" 21/2"

CastIron

Roller

2500

143/32 89/16



TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE

59/32"x71/4" 33/8"x51/4"to41/8"x61/8" 3/8"

TOP PLATE SIZES AND BOLT HOLE SPECIFICATIONS TOP PLATE SIZES AND BOLT HOLE SPECIFICATIONS

95-96 SERIES HEAVY DUTY KINGPINLESS CASTERS

STANDARD FEATURES: • Kingpinlesscasterdesign-noswivelkingpintobendorbreak.Betterthanstandardcastersatwithstandingshockandimpact.Lastlonger,savesmoney.

• Basedonoriginalsuperiorpatenteddesign.• Dropforgedupperandlowercup.• Hardenedswivelraceway.Corrosion-resistantzincplatedfinish.

• 3/4"wheelaxle&nut.• Legthickness:23/64"• Double-weldedlegs,3-1/2"forkspacing.• Largertopplateprovidesstability.• Zerkfittingsinwheelandswivelrace.• Optionalbrakeandswivellockavailable.

Series95-96castersaremadefromforgedsteel.Topplateandinnerracewayareforgedfromonepiece,providingasuperiorracewayconstructionforshockconditions.Thisforgeddesignoutperformsthestandardsteelplateweldedtotubularsteel innerraces,espe-ciallyinabusiveandimpact-loadingconditions.



TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE

59/32"x71/4" 33/8"x51/4"to41/8"x61/8" 3/8"



SWIVEL RADIUS



6" 3"

CastIron

Roller

2000

711/16 53/32



8" 3"

CastIron

Roller

2500

105/16 65/32



10" 3"

CastIron

Roller

2700

121/16 79/16



12" 3"

CastIron

Roller

3000

143/32 89/16




Capacity to 200 lbs.

SPECIFICATIONSWHEEL

DIAMETERTHREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

213/16

SoftRubberNylon 65 1/4 7/8 SR-222

1 Nylon 90 1/4 11/16 SR-212

21/213/16

SoftRubberNylon 75 15/64 7/8 SR-2510

11/8 Nylon 100 5/16 13/8 SR-252P

3

15/16

SoftRubber

Nylon 100 1/4 1 SR-31213/16 Nylon 100 1/4 7/8 SR-3101 Nylon 100 5/16 15/32 SR-314

11/4 Nylon 125 5/16 17/16 SR-33111/4 Nylon 125 3/8 17/16 SR-33011/4 Nylon 125 3/8 19/16 SR-32511/4 Ball 125 1/5 15/8 SR-33111/4 Ball 125 3/8 15/8 SR-330

31/2 11/4 SoftRubberNylon 140 5/16 17/16 SR-3531Nylon 140 3/8 17/16 SR-3530

4

1

SoftRubber

Nylon 125 5/16 15/32 SR-4121 Ball 125 5/16 15/32 SRB-412

11/4 Nylon 165 5/16 17/16 SR-43111/4 Nylon 165 3/8 17/16 SR-43011/4 Nylon 165 3/8 19/16 SR-42511/4 Ball 165 5/16 15/8 SRB-43111/4 Ball 165 3/8 15/8 SRB-43011/4 Nylon 165 1/2 19/16 SR-43211/4 Nylon 165 7/16 115/16 SR-420

5

1

SoftRubber

Nylon 125 5/16 15/32 SR-5121 Ball 125 5/16 15/32 SRB-512

11/4 Nylon 175 5/16 17/16 SR-53111/4 Nylon 175 3/8 17/16 SR-53011/4 Nylon 175 3/8 19/16 SR-52511/4 Ball 175 5/16 15/8 SRB-53111/4 Ball 175 3/8 15/8 SRB-530

SR SOFT RUBBER WHEELS

• Cushionrubbertread.• Strongcastironcenter.• Fullfloorprotection.• Highshockloads.• Softrubbertreadmoldedtoahardrubbercore

• Cushion,quietride• Protectorsfloors• Shockabsorbent• Treaddurometeris75+/-5(shoreA)

HR HARD RUBBER WHEELS


WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

213/16

HardRubberNylon 65 1/4 7/8 HR-222

1 Nylon 90 1/4 11/16 HR-212

21/213/16

HardRubberNylon 75 15/64 7/8 HR-2510

11/8 Nylon 100 5/16 13/8 HR-252P

3

15/16

HardRubber

Nylon 100 1/4 1 HR-31213/16 Nylon 100 1/4 7/8 HR-3101 Nylon 100 5/16 15/32 HR-314

11/4 Nylon 125 5/16 17/16 HR-33111/4 Nylon 125 3/8 17/16 HR-33011/4 Nylon 125 3/8 19/16 HR-32511/4 Ball 125 51/6 15/8 HR-33111/4 Ball 125 3/8 15/8 HR-330

31/211/4

HardRubberNylon 140 5/16 17/16 HR-3531Nylon 140 3/8 17/16 HR-3530

4

1

HardRubber

Nylon 125 5/16 15/32 HR-4121 Ball 125 5/16 15/32 HRB-412

11/4 Nylon 165 5/16 17/16 HR-43111/4 Nylon 165 3/8 17/16 HR-43011/4 Nylon 165 3/8 19/16 HR-42511/4 Ball 165 5/16 15/8 HRB-43111/4 Ball 165 3/8 15/8 HRB-43011/4 Nylon 165 1/2 19/16 HR-43211/4 Nylon 165 7/16 115/16 HR-420

5

1

HardRubber

Nylon 125 5/16 15/32 HR-5121 Ball 125 5/16 15/32 HRB-512

11/4 Nylon 175 5/16 17/16 HR-53111/4 Nylon 175 3/8 17/16 HR-53011/4 Nylon 175 3/8 19/16 HR-52511/4 Ball 175 5/16 15/8 HRB-53111/4 Ball 175 3/8 15/8 HRB-530


SPECIFICATIONS

• Madeofhighimpactmoldedhardrubbercomposition

• Higherloadratingthansoftrubber• Goodmobilityanddurability• Willnotflatspotunderstaticloads• Treaddurometeris75+/-5(SHORED)

RC RUBBER MOLD-ON CAST IRON WHEELS

• Cushionrubbertread.• Strongcastironcenter.• Fullfloorprotection.• Highshockloads.• Minimumdrawbarpulltostartandsustainmotion.

• Zerkfittingsinhubforlubrication.• Rollerebearingsforeaseofmaneuverability.

• Durometer70-80(SHOREA)

WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

411/2

Rubber/CastIronRoller 250 3/4 15/8 RCR-415

2 Roller 350 3/4 23/16 RCR-420

511/2

Rubber/CastIronRoller 300 3/4 15/8 RCR-515

2 Roller 375 3/4 23/16 RCR-520

6

11/2

Rubber/CastIron

Roller 300 3/4 15/8 RCR-615

2 Roller 410 3/4 23/16 RCR-620

21/2 Roller 550 1 23/4 RCR-625

3 Roller 700 1 14-Mar RCR-630

8

2

Rubber/CastIron

Roller 500 3/4 23/16 RCR-820

21/2 Roller 700 1 23/4 RCR-825

3 Roller 800 1 3 RCR-830

1021/2

Rubber/CastIronRoller 800 1 23/4 RCR-1025

3 Roller 1000 1 31/4 RCR-1030

1221/2

Rubber/CastIronRoller 900 1 23/4 RCR-1225

3 Roller 1140 1 31/4 RCR-1230

16 3 Rubber/CastIron Roller 1450 1 31/4 RCR-1603


SPECIFICATIONS


PC POLYURETHANE MOLD-ON CAST IRON WHEELS

• Resistanttomostchemicals,oil,acids,greaseandwater.

• Cushionrideabsorbsshocks.• Ourlastrubber5to1• Willnotdeveloppermanentflastspotsintread.

• Castironcenterprovidesextrastrength.• Rollerbearingforeasymaneuverability.• Durometer:85-95(SHOREA)

SPECIFICATIONS

Delrin Bearings or Plain Bore Wheel Available


WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

4 2 Polyurethane/CastIron Roller 800 3/4 23/16 PCR-4205 2 Polyurethane/CastIron Roller 1000 3/4 23/16 PCR-520

62

Polyurethane/CastIronRoller 1200 3/4 23/16 PCR-620

21/2 Roller 1600 1 23/4 PCR-6253 Roller 2000 1 31/4 PCR-630

82

Polyurethane/CastIronRoller 1400 3/4 23/16 PCR-820

21/2 Roller 1900 1 23/4 PCR-8253 Roller 2500 1 31/4 PCR-830

1021/2

Polyurethane/CastIronRoller 2200 1 23/4 PCR-1025

3 Roller 3000 1 31/4 PCR-1030

1221/2

Polyurethane/CastIronRoller 2500 1 23/4 PCR-1225

3 Roller 3200 1 31/4 PCR-1230


RA RUBBER MOLD-ON ALUMINUM WHEELS

SPECIFICATIONS

3 1/2 - 4 -5 in:

• Grayrubbertreadisnon-marking• Attractivepolishedaluminumcenter• Annularballbearingsareeasyrolling

6 and 8 in:

• Lowprofilerubbertread• Aluminumdiecastcenter• Rollerbearingforsmoothrollingandhighercapacities• Forindustrialandinstitutionalapplications

Delrin Bearings: Available on 6 and 8 in. wheels

WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

31/2 11/4 Gr.Rubber Annular 225 3/8 11/2 RAB-35144 11/4 Gr.Rubber Annular 250 3/8 11/2 RAB-4145 11/4 Gr.Rubber Annular 250 3/8 11/2 RAB-5146 2 Rubber Roller 410 3/4 23/16 RAR-6208 2 Rubber Roller 500 3/4 23/16 RAR-820

• Softrubbercushiontread• Aluminumcenter• Lightinweight,yetstrong• Fullfloorprotection• Highshockloads• Minimumdrawbarpulltostartandsustainmotion

• Durometer70-80(ShoreA)



P0 POLYURETHANE ON POLYOLEFIN CENTER MECHANICALLY BONDED TREAD


•Resistanttomostchemicals,oil,acids,greaseandwater• Cushionrideabsorbsshocks• Treadmechanicallybondedtocoremakingthiswheelvirtuallyindestructible

• Willnotdeveloppermanentflatspotsintread

• Whenequiptwithdelrinbearingwheelhasnometalpartstorust

• Perfectforequipmentthatiswashedfrequently

• Durometer:85-95(ShoreA)

WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

213/16

Polyurethane/PlasticPlain 90 5/16 7/8 PUP-210

15/16 Plain 90 1/4 1 PUP-211

311/4

Polyurethane/PlasticBall 220 3/8 15/8 PUB-311

11/4 Plain 210 3/8 19/16 PUB-314

4

11/4

Polyurethane/Plastic

Ball 230 5/16 15/8 PUB-4111/4 Ball 230 3/8 15/8 PUB-414

2 Roller 700 3/4 15/8 PUR-4202 Delrin 700 3/4 23/16 PUD-420

5

11/4

Polyurethane/Plastic

Ball 250 5/16 23/16 PUB-51011/4 Ball 250 3/8 15/8 PUB-514

2 Roller 770 3/4 23/16 PUR-5202 Delrin 770 3/4 23/16 PUD-520

62

Polyurethane/PlasticRoller 900 3/4 23/16 PUR-620

2 Delrin 900 3/4 23/16 PUD-620

82

Polyurethane/PlasticRoller 970 3/4 23/16 PUR-820

2 Delrin 970 3/4 23/16 PUD-820

SPECIFICATIONS


PN POLYURETHANE TREAD NYLON CENTER WHEELS

FEATURES:• Polyurethanetreadspeciallybondedtoahigh-impactglass-fillednyloncore

• Floorprotective,non-markingandhelpsabsorbshocks• Coreisstronglikesteel,withoutthedensityandweight• Costslesstoshipthancastironcores,anddoesn’trust• Resistanttomostchemicals,oils,acids,greaseandwater• Bearings:Delrin,ball,precisionballorrollerbearings• Durometer:95ShoreA(±5)• Temperaturerange:-40˚Fto+180˚F

PNY WHEELS / Capacity up to 1,400 lbs.

Note: The load capacity for wheels only may be higher than when used in a caster.

WHEEL DIAMETER

THREAD WID TH

HUB LENGTH

BEARING ID

WHEEL BEARING

WHEEL NUMBER

LOAD CAPACITY

42 2-7/16 1/2 Precision Ball PPB-420 7002 2-7/16 3/4 Delrin PPD-420 7002 2-7/16 3/4 Roller PPR-420 700

52 2-7/16 1/2 Precision Ball PPB-520 10002 2-7/16 3/4 Delrin PPD-520 10002 2-7/16 3/4 Roller PPR-520 1000

62 2-7/16 1/2 Precision Ball PBB-620 12002 2-7/16 3/4 Delrin PPD-620 12002 2-7/16 3/4 Roller PPR-620 1200

82 2-7/16 1/2 Precision Ball PBB-820 14002 2-7/16 3/4 Delrin PPD-820 14002 2-7/16 3/4 Roller PPR-820 1400


GP GRAY RUBBER ON POLYOLEFIN CENTER MECHANICALLY BONDED TREAD

• Specialformularubbertread-itcannotmark.• Toughpolyolefincorehelpsabsorbshocks.• Treadmechanicallybondedtothecore.• Easy-Glideballbearings-notthepress-in-type.

SPECIFICATIONS


WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

2 13/16 GrayRubber/Plastic Plasticw/Steelbushing 70 1/4 7/8 GP-210

3

13/16

GrayRubber/Plastic

Plain 100 1/4 3/16 GP-3101 Plain 120 5/16 1 GP-312

1-1/4 Annular 155 3/8 1-1/4 GPA-3141-1/4 PrecisionBall 110 5/16 1-1/4 GPB-314

3-1/2 1-1/4 GrayRubber/Plastic Annular 225 3/8 1-1/4

4

1

GrayRubber/Plastic

Plain 125 5/16 1 GP-4121-1/4 Annular 250 3/8 1-1/4 GPA-4141-1/4 PrecisionBall 150 5/16 1-1/4 GPB-414

2 * 300 1-3/16 2 GPB-4202 RollerBearing 300 1-3/16 2 GPR-420

5

1

GrayRubber/Plastic

Plain 135 5/16 1 GP-5121-1/4 Annular 250 3/8 1-1/4 GPA-5141-1/4 PrecisonBall 200 5/16 1-1/4 GPB-514


61-1/4

GrayRubber/PlasticPrecisionBall 240 3/8 1-1/4 GPB-614


81-1/4

GrayRubber/PlasticPrecisionBall 280 3/8 1-1/4 GPB-814


* Less bearing.

• Rollslikerubber,actslikepolyurethane.• Perfectformostinstitutionalandindutrialuses.

This series is NSF Listed. Please call for information.


CROWNED RUBBERWHEELS (TPR)FEATURES:• Crownedthermoplasticrubbertreadchemicallybondedtoahigh-impactpolypropylenecore

• Non-markingandfloorprotective• Crowntreadhelpsbothswivelingandrolling• Bearings:Delrin,Plain,PrecisionandRollerBearing• Durometer:95ShoreA(±5),(75Durometeravailable)• Temperaturerange:-20°Fto180°F

WHEEL DIA. THREAD WIDTH HUB LENGTH BEARING ID WHEEL BEARING WHEEL NUMBER LOAD CAPACITY3 1/1/4 1-39/64 3/8B Precision MRC-B-314 2204 1-1/4 1-39/64 3/8B Precision MRC-B-414 250

4 2

2-3/16 1-3/16

3502-7/16

3/4R Roller MRC-R-4201/2B Precision MRC-B-4201/23/4D Delrin MRC-D-420

5

1-1/4 1-39/64 3/8B Precision MRC-B-514 280

2

2-3/16 1-3/16

4002-7/16


6 2

2-3/16 1-3/16

5002-7/16


8 2

2-3/16 1-3/16

6002-7/16


MRC / Capacity up to 600 lbs.

Note: The load capacity for wheels only may be higher than when used in a caster.

SPECIFICATIONS

PH PHENOLIC WHEELS

• Phenolicresinandmacetatedfabriccombinedtoresisthardimpacts.

• Providessuperiorfloorprotection.• Quieteroperationthansteelwithcomparablecapacity.


Delrin Bearings or Plain Bore Wheels Available

SPECIFICATIONS


• Resistanttooilsandgasoline.• High-Temperaturecompositionsavailable.(Callforinformation).• Rollerbearingsprovideconsistent,smoothrolling.

WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

411/2

PhenolicRoller 600 5/8 111/16 PHR-415

2 Roller 800 3/4 23/16 PHR-420

511/2


2 Roller 1000 3/4 23/16 PHR-520

6

11/2

Phenolic

Roller 800 5/8 111/16 PHR-6152 Roller 1200 3/4 23/16 PHR-620

21/2 Roller 1600 1 23/4 PHR-6253 Roller 2000 1 31/4 PHR-630

82


21/2 Roller 2000 1 23/4 PHR-8253 Roller 2500 1 3 PHR-830

1021/2

PhenolicRoller 2500 1 23/16 PHR-1025

3 Roller 2900 1 23/4 PHR-1030

1221/2

PhenolicRoller 3000 1 23/4 PHR-1225

3 Roller 3000 1 31/4 PHR-1230

WHEEL DIA. THREAD WIDTH HUB LENGTH BEARING ID WHEEL BEARING WHEEL NUMBER LOAD CAPACITY3 1/1/4 1-39/64 3/8B Precision MRC-B-314 2204 1-1/4 1-39/64 3/8B Precision MRC-B-414 250

4 2

2-3/16 1-3/16

3502-7/16


5

1-1/4 1-39/64 3/8B Precision MRC-B-514 280

2

2-3/16 1-3/16

4002-7/16


6 2

2-3/16 1-3/16

5002-7/16


8 2

2-3/16 1-3/16

6002-7/16


HP HEAVY DUTY POLYOFEFIN “PLASTIC” WHEELS

• Injectedmoldedpolyolefinorpolypropylene.• Canwithstandhighimpact.• Usedwherenoiseofoperationisnotafactor,buteconomyis.• Unaffectedbymostchemicals,solvents,oils,etc.• Doesnotabsorbwater.• Ligfhtweightdurableeasyrolling.• Non-marking• Plainbore,orwithrollerbearings.

SPECIFICATIONS

Available with plain bore or delrin bearings


WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

313/8

HeavyDutyPlasticPlain 300 3/8 19/16 HDP-314

13/8 Plain 300 1/2 19/16 HDP-315

4

1

HeavyDutyPlastic

Plain 300 5/16 13/16 HDP-41013/8 Ball 375 3/8 11/4 HDB-41111/4 Plain 300 7/16 15/8 HDP-41411/2 Plain 375 3/8 15/8 HDP-415

2 Roller 550 3/4 23/16 HDR-420

5

1

HeavyDutyPlastic

Plain 375 5/16 13/16 HDP-51013/8 Ball 400 3/8 15/8 HDB-51111/2 Plain 540 3/8 15/8 HDP-515

2 Roller 650 3/4 23/16 HDR-5206 2 HeavyDutyPlastic Roller 700 3/4 23/16 HDR-6208 2 HeavyDutyPlastic Roller 900 3/4 23/16 HDR-820

SPECIFICATIONS


SOLID ELASTOMER WHEELS• SolidElastomerwheelsarethebestchoiceformovingheavyloadswithease.Theyaretheergonomicsolutiontomanyheavydutyapplicationsandoutperformanyconventionalcasterwheelonthemarket.

• SolidElastomerwheelsarerecommendedfortow-lineapplicationsandarepopularinautomotiveenvi-ronments.Theyalsoofferasuperiorresistancetochip-ping,flatspotting,crackingandmostchemicals,acidsandwater.

• Standard Color / Finish: Grey• Tread Hardness: 80 (± 5) Shore D Scale• TemperatureRange:-40˚Fto+230˚

Capacity up to 1,250 lbs. each

WHEEL DIA.

TREAD WIDTH BEARING TYPE LOAD

CAPACITYBEARING

BOREHUB

LENGTHAPPROX. WEIGHT PART#

3 13/8PrecisionBall 300 1/2 19/16 1/2 3-750

PrecisionBall 300 3/8 19/16 1/2 3-755

4

13/8 PrecisionBall 500 3/8 19/16 3/4 4-755

2

Delrin 1,250 3/4 23/8 1/2 4-761

Roller 1,250 3/4 23/8 1/2 4-760

PrecisionBall 1,250 1/2 27/16 1/2 4-770

5

13/8FlangedBall 700 1/2 19/16 1 5-750

PrecisionBall 700 3/8 19/16 1 5-755

2

Delrin 1,250 3/4 23/8 2 5-761

Roller 1,250 3/4 23/8 2 5-760

PrecisionBall 1,250 1/2 27/16 5-770

6 2

Delrin 1,250 3/4 23/8 21/4 6-761

Roller 1,250 3/4 23/8 21/4 6-760

PrecisionBall 1,250 1/2 27/16 21/4 6-770

8 2

Delrin 1,250 3/4 23/8 23/8 8-761

Roller 1,250 3/4 23/8 23/8 8-760

PrecisionBall 1,250 1/2 27/16 27/16 8-770



SOLID POLYURETHANE WHEELS


• Perfectlymoldedandmachinedforhighperformance.

• Notreadseparation,rusting,waterabsorptionorfloor-marking

• Resistanttomostchemicals,oils,acids,greasesandotherickystuff

• Excellentforwash-downsituationsorapplicationsinoraroundalotofwater

• Bearings:Delrin,rollerorprecisionballbearings

• Durometer:60shoreD(±5)• Temperaturerange:-40°Fto+180°F


WHEEL DIA. TREAD WIDTH HUB LENGTH BEARING ID WHEEL BEARING WHEEL

NUMBERLOAD

CAPACITY3 1-17/64 1-9/16 1/2 Plain SPP-314 300

4

1-17/64 1-9/16 1/2 Plain SPP-414

4001-1/21-5/8 1-3/16 (w/obearing) SPR-415LB

1-7/83/4 Roller SPR-4153/4 Delrin SPD-415

2

2-3/16 1-3/16 (w/obearing) SPR-415LB

7502-7/16

3/4 Roller SPR-4201/2 PrecisionBall SPB-4203/4 Delrin SPD-420

5"

1-17/64 1-9/16 1/2 Plain SPP-514

7001-1/2

1-5/8 1-3/16 (w/obearing) SPR-515LB

1-7/8 3/4 Roller SPR-5153/4 Delrin SPD-515

2

2-3/16 1-3/16 (w/obearing) SPR-515LB

8002-7/163/4 Roller SPR-5201/2 PrecisionBall SPB-5203/4 Delrin SPD-520

6" 2

2-3/16 1-3/16 (w/obearing) SPR-620LB

9002-7/161/2 PrecisionBall SPR-6203/4 Delrin SPB-6203/4 Roller SPD-620

8" 2

2-3/16 1-3/16 (w/obearing) SPR-820LB

10002-7/161/2 PrecisionBall SPR-8203/4 Delrin SPB-8203/4 Roller SPD-820

Capacity up to 1,000 lbs. each

SI / CI SINTERED IRON AND CAST IRON WHEELS

2- 2 1/2 - 3 in:

• Strongsiterediron.• Smoothtread,hardworking.• Plainbore.

4 in:

• Toughcastiron.• Smoothtread,hardworking

5 thru 12 in:

• Acombinationofcastironandsteel.• Longwearing,highcapacity.• Rollerbearingsandzerkinhub.

SPECIFICATIONS


Capacity 125 to 2500 lbs.

WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

2 1 SinteredIron Plain 125 1/4 11/4 SIP-21021/2 11/8 SinteredIron Plain 200 5/16 13/8 SIP-2510

3 31/4 SinteredIron Plain 250 3/8 19/16 SIP-314

411/4 SinteredIron Plain 300 3/8 111/16 SIP-41411/4 CastIron Plain 300 7/16 111/16 CIP-414

2 CastIron Roller 700 3/4 23/16 CIR-4205 2 CastIron Roller 1000 3/4 23/16 CIR-520

62

CastIronRoller 1200 3/4 23/16 CIR-620

21/2 Roller 1600 1 23/4 CIR-6253 Roller 2500 1 21/4 CIR-630

82

CastIronRoller 1400 3/4 23/16 CIR-820

21/2 Roller 1600 1 23/4 CIR-8253 Roller 2500 1 31/4 CIR-830

1021/2

CastIronRoller 1800 1 23/4 CIR-1025

3 Roller 2500 1 31/4 CIR-103012 21/2 CastIron Roller 1800 1 23/4 CIR-1225


VG V-GROOVE STEEL WHEELS

Foruseoneitheratrack(invertedangleiron),aflatsurface,orboth,thiswheelisexactlymachinedinthecenterofthetreadwithareliefgrooveatthebaseofthe"V"directingtheloadtoeachfaceofthegroove.

Outstanding features:

• Useoftrackcaneliminatefloordamage.• Controlleddirctionaltravel.• DurothanelininginV-grooveforincreasedwheellifeand/ornoisereductionavailableonrequest.

SPECIFICATIONS

Delrin Bearings Available



WHEEL DIAMETER

THREAD WIDTH

WHEEL COMPOSITION

BEARING TYPE

LOAD CAPACITY

BEARING BORE

HUB LENGTH

PART NUMBER

411/2

CastIronRoller 600 3/4 15/8 VGR-415

2 Roller 700 3/4 23/16 VGR-4205 2 CastIron Roller 800 3/4 23/16 VGR-5206 2 CastIron Roller 1000 3/4 23/16 VGR-6208 21/2 CastIron Roller 2500 1 31/4 VGR-825

13-14 SERIES LIGHT MEDIUM DUTY CASTERSFEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Construction – Heavy gauge cold rolled steel,

formed for strength• Axle – 5/16" diameter bolt with lock nut• Optional – Bright nickel plating fork and

upper race add 5 to series number example: Change 13 series to 135 series or, 14 series

to 145 series• Optional Accessories

SERIES 13STANDARD STEMS

3/8-16 x 1 1/2" 1/2-13 x 1" 7/16-14 x 1 1/2" 1/2-13 x 1 1/2" 1/2-13 x 2 3/4"

SERIES 14Standard cold headed stem sizes:

7/16" x 1 3/8" • 7/16" x 1 15/16"Machined stems available from

1/2" dia. to 1" dia.Square stems available with drilled hole:

.845" • .860" • .875"

5-13-105 5-14-212G



SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SWIVEL RIGID POUNDS

315/16

Soft Tread Rubber Delrin 100

3 5/8 2 3/4

3-13-103 481-08R

1 1/8Hard Tread Rubber Delrin 125 3-13-104 481-10RSoft Tread Rubber Delrin 100 3-13-433G 481-07R

11/8 Polyolefin Plain 125 3-13-511 481-05R

4

15/16Soft Tread Rubber Delrin 115

4 5/8 3 5/16

4-13-103 481-03R

1 1/2

Hard Tread Rubber Delrin 140 4-13-104 481-13R

Soft Tread Rubber Delrin 115 4-13-433 481-25R

1

Polyolefin Plain 150 4-13-511 581-08RPoly Loc Grey Delrin 150 4-13-211G 581-10RPoly Loc Grey Ball 150 4-14-212G 581-12RPoly Loc Grey Ball 150 4-13-212P 581-07R

5

1 1/4Soft Tread Rubber Delrin 125

5 5/8 4

5-13-103 581-05R

1 7/8

Hard Tread Rubber Delrin 150 5-13-104 581-03RSoft Tread Donut Delrin 125 5-13-433 581-13R

1

Polyolefin Plain 150 5-13-511 581-25RPoly Loc Grey Delrin 160 5-13-211G 5-14-211GPoly Loc Grey Ball 160 5-13-212G 5-14-212GPoly Loc Poly Ball 160 5-13-212P 5-14-212P

17-19 SERIES LIGHT MEDIUM DUTY CASTERS FEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened



upper race add 5 to series number example: Change 17 series to 175 series or, 19 series to 195 series• Optional Accessories

SERIES 17Standard male pipe plug sizes 3/4" and 1"; 1/2" and 11/4" are

also available on quantityorders. Contact the factory

for details.

5-17-103 5-19-211G

SERIES 193/4 OCTAGON



SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SWIVEL RIGID POUNDS

315/16


3 5/8 2 3/4

3-17-103 3-19-103

1 1/8Hard Tread Rubber Delrin 125 3-17-104 3-19-104Soft Tread Rubber Delrin 100 3-17-433G 3-19-433G

11/8 Polyolefin Plain 125 3-17-511 3-19-511

4


4 5/8 3 5/16

4-17-103 4-19-103

1 1/2

Hard Tread Rubber Delrin 140 4-17-104 4-19-104Soft Tread Rubber Delrin 115 4-17-433 4-19-433

1

Polyolefin Plain 150 4-17-511 4-19-511Poly Loc Grey Delrin 150 4-17-211G 4-19-211GPoly Loc Grey Ball 150 4-17-212G 4-19-212GPoly Loc Grey Ball 150 4-17-212P 4-19-212P

5


5 5/8 4

5-17-103 5-19-103

1 7/8

Hard Tread Rubber Delrin 150 5-17-104 5-19-104Soft Tread Donut Delrin 125 5-17-433 5-19-433

1

Polyolefin Plain 150 5-17-511 5-19-511Poly Loc Grey Delrin 160 5-17-211G 5-19-211GPoly Loc Grey Ball 160 5-17-212G 5-19-212GPoly Loc Poly Ball 160 5-17-212P 5-19-212P

25-26 SERIES LIGHT MEDIUM DUTY CASTERSFEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened



upper race add 5 to series number example: Change 25 series to 255 series or, 26 series to 265 series• Optional Accessories

SERIES 25NOTE: Please add proper suffix numberfor top plate size desired

from chart.

5-25-511-4 5-26-433-4

SERIES 26NOTE: Rigid casters supplied only

with top plate options 3 & 4.

STANDARD TOP PLATE SIZES


SUFFIX NO. OVERALL SIZE BOLT HOLE SPACING BOLT HOLE SIZE1 2 7/16” x 2 7/16” 1 ¾”x 1 ¾” 1/4”2 2 3/4” x 3” 1” x 2 ¼” 1/4”3 2 3/8” x 2 5/8” 1 ¾” x 3” 1/4”4 2 3/8” x 2 5/8” 1 ¾” x 3” 5/16”


SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SERIES 25 SERIES 26 POUNDS

315/16


3 3/4 2 3/4

3-25-103 3-26-103

1 1/8Hard Tread Rubber Delrin 125 3-25-104 3-26-104Soft Tread Rubber Delrin 100 3-25-433G 3-26433G

1 1/8 Polyolefin Plain 125 3-25-511 3-26-511

4


4 3/4 3 5/16

4-25-103 4-26-103

1 1/2


1


5


5 3/4 4

5-25-103 5-26-103

1 7/8


1


27-28 SERIES LIGHT MEDIUM DUTY CASTERS FEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Construction – Heavy gauge cold rolled

steel, formed for strength• Axle – 5/16" diameter bolt with lock nut• Optional – Bright nickel plating fork and

upper race add 5 to series number example: Change 27 series to 275 series or, 28 series

to 285 series• Optional Accessories

SERIES 27Fits a wide range of tubing from 3/4" I.D. to 17/8" I.D., round or square. Please furnish tubing

O.D. and gauge or I.D.

5-27-211G 5-28-104

SERIES 28Hollow center bushing to accept a

standard 3/8" bolt.



SWIVEL RADIUS


APP. WEIGHT


3

15/16 Soft Tread Rubber Delrin 100 3 5/8 2 3/4 3-27-103 3-28-103 1 1/8Hard Tread Rubber Delrin 125 3-27-104 3-28-104Soft Tread Rubber Delrin 100 3-27-433G 3-28-433G

1 1/8 Polyolefin Plain 125 3-27-511 3-28-511

4


4 5/8 35/16

4-27-103 4-28-103

1 1/2


1


5


5 5/8 4

5-27-103 5-28-103

1 7/8


1


SPECIFICATIONS FOR 27-28

30-31 SERIES MEDIUM DUTY CASTERS FEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Dust Cover – Helps protect swivel bearings• Construction – Heavy gauge cold rolled

steel, formed for strength• Axle – 3/8" diameter bolt with lock nut• King Pin – 1/2" steel rivet, hydraulically

upset• Optional Accessories

SERIES 30Note: Please add proper suffix

number for top plate size desired from chart.

5-30-213GF-2 5-31-113-2


number for top plate size desired from chart.



SWIVEL RADIUS


APP. WEIGHT


21/2 11/4Cushion Tread Rubber Delrin 140

3 5/8 2 3/42 1/2-30-105 2 1/2-31-105

1 11/16Hard Tread Rubber Delrin 210 2 1/2-30-106 2 1/2-31-106Polyolefin Plain 210 21 /2-30-513 2 1/2-31-513

3

11/4

Cushion Tread Rubber Delrin 150

4 1/8 3

3-30-105 3-31-105

1 3/4

Hard Tread Rubber Delrin 220 3-30-106 3-31-106Cushion Tread Rubber Ball 150 3-30-152 3-31-152

Hard Tread Rubber Ball 220 3-30-162 3-31-162Semi-Steel Plain 300 3-30-120 3-31-120

11/2Polyolefin Plain 250 3-30-521 3-31-152Phenolic Plain 300 3-30-121 3-31-121Phenolic Roller 300 3-30-221 3-31-221


TOP PLATE SIZES AND BOLT HOLE SPECIFICATIONSSUFFIX NO. OVERALL SIZE BOLT HOLE SPACING BOLT HOLE SIZE

1 2 3/8”x 3 5/8” 1 3/4”x 3” 1/4”2 2 3/8”x 3 5/8” 1 3/4”x 3” 5/16”3 3 1/8”x 4 1/8” 2 3/8”x 3 7/16” 5/16”4 4”x 4” 3”x 3” 3/8”5 3 3/4”x 4 1/2” 2 5/8”x 3 5/8” to 3”x3” 3/8”



WHEEL CAPAC-ITY

LOAD HEIGHT

SWIVEL RADIUS


APP. WEIGHT


31/2 11/4


4 5/8 3 1/4

3 1/2-30-105 3 1/2-31-1052Hard Tread Rubber Delrin 230 3 1/2-30-106 3 1/2-31-106

Cushion Tread Rubber Ball 160 3 1/2-30-452 3 1/2-31-452Hard Tread Rubber Ball 230 3 1/2-30-462 3 1/2-31-462

2 3/16

Polyolefin Plain 250 3 1/2-30-513 3 1/2-31-513Rubber Tire Ball 200 3 1/2-30-113 3 1/2-31-113

Grey Rubber Tire Ball 225 3 1/2-30-113G 3 1/2-31-113GPolyurethane Tire Ball 250 3 1/2-30-113P 3 1/2-31-113PAdvantage Donut Delrin 225 3 1/2-30-314GD 3 1/2-31-314GDAdvantage Flat Delrin 250 3 1/2-30-314GF 3 1/2-31-314GF

Advantage Donut Ball 225 3 1/2-30-213GD 3 1/2-31-213GDAdvantage Flat Ball 250 3 1/2-30-213GF 3 1/231-213GFPoly Loc Grey Ball 250 3 1/2-30-213G 3 1/2-31-213GPoly Loc Grey Delrin 250 3 1/2-30-314G 3 1/2-31-314GPoly Loc Poly Ball 250 3 1/2-30-213P 3 1/2-31-213P

Semi-Steel Plain 300 3 1/2-30-120 3 1/2-31-120

411/4


5 1/8 3 1/2

4-30-105 4-31-105

2 3/8Hard Tread Rubber Delrin 250 4-30-106 4-31-106

Cushion Tread Rubber Ball 170 4-30-452 4-31-452Hard Tread Rubber Ball 250 4-30-462 4-31-462

Rubber Tire Ball 200 4-30-113 4-31-113

2 1/2

Grey Rubber Tire Ball 200 4-30-113G 4-31-113GPolyurethane Tire Ball 275 4-30-113P 431-113PAdvantage Donut Delrin 250 4-30-314GD 4-31-314GDAdvantage Flat Delrin 300 4-30-314GF 4-31-314GF

Advantage Donut Ball 250 4-30-213GD 4-31-213GDAdvantage Flat Ball 300 4-30-213GF 4-31-213GFPoly Loc Grey Ball 275 4-30-213G 4-31-213GPoly Loc Grey Delrin 275 4-30-314G 4-31-314GPoly Loc Poly Ball 275 4-30-213P 4-31-213P

Polyolefin Plain 275 4-30-513 4-31-513Semi-Steel Plain 300 4-30-120 4-31-120

11/2Phenolic Plain 300 4-30-121 4-31-121Phenolic Roller 300 4-30-221 4-31-221



WHEEL CAPAC-ITY

LOAD HEIGHT

SWIVEL RADIUS


APP. WEIGHT


511/4


6 1/4 4

5-30-105 5-31-105

2 3/4

Hard Tread Rubber Delrin 280 5-30-106 5-31-106Conductive Rubber Seft_lube 200 5-30-105C 5-31-105C

Neoprene Delrin 200 5-30-105N 5-31-105NGrey Rubber Delrin 200 5-30-105G 5-31-105G



Rubber Tire Ball 200 5-30-113 5-31-113

3

Grey Rubber Tire Ball 200 5-30-113G 5-31-113GPolyurethane Tire Ball 300 5-30-113P 5-31-113PAdvantage Donut Delrin 250 5-30-314GD 5-31-314GDAdvantage Flat Delrin 325 5-30-314GF 5-31-314GF


Polyolefin Delrin 300 5-30-513 5-31-513Polyolefin Ball 300 5-30-514 5-31-514Semi-Steel Plain 300 5-30-120 5-31-120

11/2Phenolic Plain 300 5-30-121 5-31-121Phenolic Rubber 300 5-30-221 5-31-221

6

11/4


7 1/4 4 1/2

6-30-105 6-31-105

3 1/8


Neoprene Delrin 220 6-30-105N 6-31-105NCushion Tread Rubber Ball 220 6-30-152 6-31-152

Hard Tread Rubber Ball 300 6-30-162 6-31-162Rubber Tire Ball 250 6-30-113 6-31-113

3 3/4

Grey Rubber Tire Ball 250 6-30-113G 6-31-113GPolyurethane Tire Ball 300 6-30-113P 6-31-113PAdvantage Donut Delrin 300 6-30-314GD 6-31-314GDAdvantage Donut Ball 300 6-30-213GD 6-31-213GD

Poly Loc Grey Ball 300 6-30-213G 6-31-213GPoly Loc Grey Delrin 300 6-30-314G 6-31-314GPoly Loc Poly Ball 300 6-30-213P 6-31-213P

11/2Phenolic Plain 300 6-30-121 6-31-121Phenolic Rubber 300 6-30-221 6-31-221Polyolefin Plain 300 6-30-521 6-31-52


36-3S SERIES MEDIUM DUTY CASTERS

FEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with

hardened raceways for extra strength

• Dust Cover – Helps protect swivel bearings

• Construction – Heavy gauge cold rolled steel, formed for strength

• Axle – 3/8" diameter bolt with lock nut

• King Pin – 1/2" steel rivet, hydrauli-cally upset

• Optional Accessories

SERIES 36STANDARD STEMS

1/2-13 x 3/4 1/2-20 x 3/4 5/8-18 x 13/4 1/2-13 x 1 1/2-20 x 21/4 3/4-10 x 1 1/2-13 x 11/2 5/8-11 x 11/4"

Other sizes available on special request.

5-36-213GD 5-3S-513

SERIES 3SSupplied with hollow kingpin formounting with 3/8" bolt and nut.



SWIVEL RADIUS


APP. WEIGHT


ING POUNDS INCHES INCHESSERIES 36 THREAD

STEM

SERIES 3S STEMLESS POUNDS


3 5/8 2 3/421/2-36-105 21/2-3S-105

1 11/16Hard Tread Rubber Delrin 210 21/2-36-106 21/2-3S-106Polyolefin Plain 210 21/2-36-513 21/2-3S-513

3

11/4


4 1/8 3

3-36-105 3-3S-105

1 3/4

Hard Tread Rubber Delrin 220 3-36-106 3-3S-106Cushion Tread Rubber Ball 150 3-36-152 3-3S-152

Hard Tread Rubber Ball 220 3-36-162 3-3S-162Semi-Steel Plain 300 3-36-120 3-3S-120

11/2Polyolefin Plain 250 3-36-521 3-3S-152Phenolic Plain 300 3-36-121 3-3S-121Phenolic Roller 300 3-36-221 3-3S-221

SPECIFICATIONS FOR 36-3S



SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES

SERIES 36 THREAD

STEM


31/2 11/4


4 5/8 3 1/4

31/2-36-105 31/2-3S-1052Hard Tread Rubber Delrin 230 31/2-36-106 31/2-3S-106

Cushion Tread Rubber Ball 160 31/2-36-452 31/2-3S-452Hard Tread Rubber Ball 230 31/2-36-462 31/2-3S-462

2 3/16

Polyolefin Plain 250 31/2-36-513 31/2-3S-513Rubber Tire Ball 200 31/2-36-113 31/2-3S-113

Grey Rubber Tire Ball 225 31/2-36-113G 31/2-3S-113GPolyurethane Tire Ball 250 31/2-36-113P 31/2-3S-113PAdvantage Donut Delrin 225 31/2-36-314GD 31/2-3S-314GDAdvantage Flat Delrin 250 31/2-36-314GF 31/2-3S-314GF

Advantage Donut Ball 225 31/2-36-213GD 31/2-3S-213GDAdvantage Flat Ball 250 31/2-36-213GF 31/2-3S-213GFPoly Loc Grey Ball 250 31/2-36-213G 31/2-3S-213GPoly Loc Grey Delrin 250 31/2-36-314G 31/2-3S-314GPoly Loc Poly Ball 250 31/2-36-213P 31/2-3S-213P

Semi-Steel Plain 300 31/2-36-120 31/2-3S-120

4

11/4


4 15/16 3 1/2

4-36-105 4-3S-105

2 3/8Hard Tread Rubber Delrin 250 4-36-106 4-3S-106

Cushion Tread Rubber Ball 170 4-36-452 4-3S-452Hard Tread Rubber Ball 250 4-36-462 4-3S-462

Rubber Tire Ball 200 4-36-113 4-3S-113

2 1/2

Grey Rubber Tire Ball 200 4-36-113G 4-3S-113GPolyurethane Tire Ball 275 4-36-113P 4-3S-113PAdvantage Donut Delrin 250 4-36-314GD 4-3S-314GDAdvantage Flat Delrin 300 4-36-314GF 4-3S-314GF

Advantage Donut Ball 250 4-36-213GD 4-3S-213GDAdvantage Flat Ball 300 4-36-213GF 4-3S-213GFPoly Loc Grey Ball 275 4-36-213G 4-3S-213GPoly Loc Grey Delrin 275 4-36-314G 4-3S-314GPoly Loc Poly Ball 275 4-36-213P 4-3S-213P

Polyolefin Plain 275 4-36-513 4-3S-513Semi-Steel Plain 300 4-36-120 4-3S-120

11/2Phenolic Plain 300 4-36-121 4-3S-121Phenolic Roller 300 4-36-221 4-3S-221



SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES

SERIES 36 THREAD

STEM


511/4


6 1/6 4

5-36-105 5-3S-105

2 1/2

Hard Tread Rubber Delrin 280 5-36-106 5-3S-106Conductive Rubber Seft_lube 200 5-36-105C 5-3S-105C

Neoprene Delrin 200 5-36-105N 5-3S-105NGrey Rubber Delrin 200 5-36-105G 5-3S-105G



Rubber Tire Ball 200 5-36-113 5-3S-113

3

Grey Rubber Tire Ball 200 5-36-113G 5-3S-113GPolyurethane Tire Ball 300 5-36-113P 5-3S-113PAdvantage Donut Delrin 250 5-36-314GD 5-3S-314GDAdvantage Flat Delrin 325 5-36-314GF 5-3S-314GF

Advantage Donut Ball 250 5-36-213GD 5-3S-213GDAdvantage Flat Ball 325 5-36-213GF 5-3S-213GFPoly Loc Grey Ball 300 5-36-213G 5-3S-213GPoly Loc Grey Delrin 300 5-36-314G 5-3S-314GPoly Loc Poly Ball 300 5-36-213P 5-3S-213P

Polyolefin Delrin 300 5-36-513 5-3S-513Polyolefin Ball 300 5-36-514 5-3S-514

Semi-Steel Plain 300 5-36-120 5-3S-120

11/2Phenolic Plain 300 5-36-121 5-3S-121Phenolic Rubber 300 5-36-221 5-3S-221

6

11/4


7 1/16 4 1/2

6-36-105 6-3S-105

3 1/8

Hard Tread Rubber Delrin 300 6-36-106 6-3S-106Conductive Rubber Seft_lube 220 6-36-105C 6-3S-105C

Neoprene Delrin 220 6-36-105N 6-3S-105NCushion Tread Rubber Ball 220 6-36-152 6-3S-152

Hard Tread Rubber Ball 300 6-36-162 6-3S-162Rubber Tire Ball 250 6-36-113 6-3S-113

3 3/4

Grey Rubber Tire Ball 250 6-36-113G 6-3S-113GPolyurethane Tire Ball 300 6-36-113P 6-3S-113PAdvantage Donut Delrin 300 6-36-314GD 6-3S-314GDAdvantage Donut Ball 300 6-36-213GD 6-3S-213GD

Poly Loc Grey Ball 300 6-36-213G 6-3S-213GPoly Loc Grey Delrin 300 6-36-314G 6-3S-314GPoly Loc Poly Ball 300 6-36-213P 6-3S-213P

11/2Phenolic Plain 300 6-36-121 6-3S-121Phenolic Rubber 300 6-36-221 6-3S-221Polyolefin Plain 300 6-36-521 6-3S-521



38-40 SERIES MEDIUM DUTY CASTERS FEATURES: • Finish – Bright Zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Dust Cover – Helps protect swivel bearings• Construction – Heavy gauge cold rolled

steel, formed for strength• Axle – 3/8" diameter bolt with lock nut• King Pin – 1/2" steel rivet, hydraulically

upset• Optional Accessories

SERIES 38STANDARD SIZE PIPE PLUGS

AVAILABLE:3/4" - 1" - 11/4"

Please specify size desired.

SERIES 40RUBBER APPLICATOR SERIES

Available to fit 7/8" to 17/8" I.D. tubing.Please specify exact tubing I.D. or O.D.

and gauge.

5-38-105 5-40-213P


SWIVEL RADIUS


APP. WEIGHT

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SERIES 38

PIPE PLUGSERIES 40

APPLICATOR POUNDS


3 7/16 2 3/421/2-38-105 21/2-40-105

1 11/16Hard Tread Rubber Delrin 210 21/2-38-106 21/2-40-106Polyolefin Plain 210 21/2-38-513 21/2-40-513

3

11/4


4 5/16 3

3-38-105 3-40-105

1 3/4

Hard Tread Rubber Delrin 220 3-38-106 3-40-106Cushion Tread Rubber Ball 150 3-38-152 3-40-152

Hard Tread Rubber Ball 220 3-38-162 3-40-162Semi-Steel Plain 300 3-38-120 3-40-120

11/2Polyolefin Plain 250 3-38-521 3-40-152Phenolic Plain 300 3-38-121 3-40-121Phenolic Roller 300 3-38-221 3-40-221

31/2 11/4


4 7/16 3 1/4

31/2-38-105 31/2-40-1052Hard Tread Rubber Delrin 230 31/2-38-106 31/2-40-106

Cushion Tread Rubber Ball 160 31/2-38-452 31/2-40-452Hard Tread Rubber Ball 230 31/2-38-462 31/2-40-462

2 3/16

Polyolefin Plain 250 31/2-38-513 31/2-40-513Rubber Tire Ball 200 31/2-38-113 31/2-40-113

Grey Rubber Tire Ball 225 31/2-38-113G 31/2-40-113GPolyurethane Tire Ball 250 31/2-38-113P 31/2-40-113PAdvantage Donut Delrin 225 31/2-38-314GD 31/2-40-314GDAdvantage Flat Delrin 250 31/2-38-314GF 31/2-40-314GF

Advantage Donut Ball 225 31/2-38-213GD 31/2-40-213GDAdvantage Flat Ball 250 31/2-38-213GF 31/2-40-213GFPoly Loc Grey Ball 250 31/2-38-213G 31/2-40-213GPoly Loc Grey Delrin 250 31/2-38-314G 31/2-40-314GPoly Loc Poly Ball 250 31/2-38-213P 31/2-40-213P

Semi-Steel Plain 300 31/2-38-120 31/2-40-120






SWIV-EL RA-DIUS


APP. WEIGHT


PIPE PLUGSERIES 40

APPLICATOR POUNDS

411/4


4 15/16 3 1/2

4-38-105 4-40-105

2 3/8Hard Tread Rubber Delrin 250 4-38-106 4-40-106


Rubber Tire Ball 200 4-38-113 4-40-113

2 1/2



Polyolefin Plain 275 4-38-513 4-40-513Semi-Steel Plain 300 4-38-120 4-40-120

11/2Phenolic Plain 300 4-38-121 4-40-121Phenolic Roller 300 4-38-221 4-40-221

511/4


6 1/6 4

5-38-105 5-40-105

2 3/4

Hard Tread Rubber Delrin 280 5-38-106 5-40-106Conductive Rubber Seft-lube 200 5-38-105C 5-40-105C

Neoprene Delrin 200 5-38-105N 5-40-105NGrey Rubber Delrin 200 5-38-105G 5-40-105G



Rubber Tire Ball 200 5-38-113 5-40-113

3



Polyolefin Delrin 300 5-38-513 5-40-513Polyolefin Ball 300 5-38-514 5-40-514Semi-Steel Plain 300 5-38-120 5-40-120

11/2Phenolic Plain 300 5-38-121 5-40-121Phenolic Rubber 300 5-38-221 5-40-221

NOTE: Add 3/8" to load height for 38 Series casters.




SWIV-EL RA-DIUS


APP. WEIGHT


PIPE PLUGSERIES 40

APPLICATOR POUNDS

6

11/4


7 1/16 4 1/2

6-38-105 6-40-105

3 1/8


Neoprene Delrin 220 6-38-105N 6-40-105NCushion Tread Rubber Ball 220 6-38-152 6-40-152

Hard Tread Rubber Ball 300 6-38-162 6-40-162Rubber Tire Ball 250 6-38-113 6-40-113

3 3/4

Grey Rubber Tire Ball 250 6-38-113G 6-40-113GPolyurethane Tire Ball 300 6-38-113P 6-40-113PAdvantage Donut Delrin 300 6-38-314GD 6-40-314GDAdvantage Donut Ball 300 6-38-213GD 6-40-213GD

Poly Loc Grey Ball 300 6-38-213G 6-40-213GPoly Loc Grey Delrin 300 6-38-314G 6-40-314GPoly Loc Poly Ball 300 6-38-213P 6-40-213P

11/2Phenolic Plain 300 6-38-121 6-40-121Phenolic Rubber 300 6-38-221 6-40-221Polyolefin Plain 300 6-38-521 6-40-521

61-62 SERIES MEDIUM DUTY

SERIES 61 SERIES 62

6-61-615-1 6-62-221-1 FEATURES:• Finish – Bright zinc plating• Swivel – Full double ball bearing

raceways• Riveted King Pin – 5/8" diameter rivet• Construction – Formed from 3/16"

thick steel• Grease fittings provided in swivel

raceway and wheel bearings• Fork leg spacing 2"



SWIVEL RADIUS


APP. WEIGHT


SWIVELSERIES 62

RIGID POUNDS

4

1 5/8"

SoftTread Rubber Self-lube 225

5 5/8 3 9/16

4-61-109 4-62-109

4

Hard Tread Rubber Self-lube 350 4-61-110 4-62-110SoftTread Rubber Roller 225 4-61-209 4-62-209

Hard Tread Rubber Roller 350 4-61-210 4-62-210

1 1/2"

Phenolic Plain 500 4-61-121 4-62-121Phenolic Roller 500 4-61-221 4-62-221Polyolefin plain 450 4-61-521 4-62-521Polyolefin Roller 450 4-61-522 4-62-522Cast lron Roller 500 4-61-230 4-62-230

Mold-on Ruber Ball 225 4-61-615 4-62-6155

Mold-on Poly Ball 425 4-61-715 4-62-715

5

1 5/8"

SoftTread Rubber Self-lube 260

6 1/2 4 5/16

5-61-109 5-62-109

5

Hard Tread Rubber Self-lube 400 5-61-110 5-62-110SoftTread Rubber Roller 260 5-61-109 5-62-109

Hard Tread Rubber Roller 400 5-61-210 5-62-210

1 1/2"

Advantage Roller 350 5-61-215F 5-62-215FPoly Loc Grey Roller 500 5-61-215G 5-62-215GPoly Loc Poly Roller 500 5-61-215P 5-62-215P

Phenolic Plain 500 5-61-121 5-62-121Phenolic Roller 500 5-61-221 5-62-221Polyolefin Plain 450 5-61-521 5-62-521Polyolefin Roller 450 5-61-522 5-62-522Cast lron Roller 500 5-61-230 5-62-230

6 Mold-on Rubber Ball 250 5-61-615 5-62-615Mold-on Poly Ball 450 5-61-715 5-62-715


Note: Approximate weights shown are for swivels casters. Rigid casters deduct 1 lb.



SWIVEL RADIUS


APP. WEIGHT


SWIVELSERIES 62

RIGID POUNDS

6 1 1/2"

Advantage Roller 375

7 1/2 5 1/16

6-61-215GF 6-62-215GF

6

Poly Loc Grey Roller 300 6-61-215G 6-62-215GPoly Loc Poly Roller 500 6-61-215P 6-62-215P

Phenolic Plain 500 6-61-121 6-62-121Phenolic Roller 500 6-61-221 6-62-221Polyolefin Celcon 500 6-61-523 6-62-523Polyolefin Roller 500 6-61-525 6-62-525Cast lron Roller 500 6-61-230 6-62-230

7Mold-on Rubber Ball 350 6-61-615 6-62-615Mold-on Poly Ball 500 6-61-715 6-62-715

8 1 1/2"

Advantage Roller 500

9 1/2 6 1/2

8-61-215GF 8-62-215GF

8Poly Loc Grey Roller 500 8-61-215G 8-62-215G

Poly Loc Poly Roller 500 8-61-215P 8-62-215PPolyolefin Celcon 500 8-61-523 8-62-523Polyolefin Roller 500 8-61-525 8-62-525

10 1 1/2" Poly Loc Ball 500 11 7 1/2 10-61-215G 10-62-215G 8 1/2


TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE3 3/4" x 4 1/2" 2 5/8" x 3 5/8" to 3" x 3" 3/8"


81-82 SERIES HEAVY DUTYFEATURES:• Finish – Bright zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Riveted King Pin – 5/8" diameter• Construction – Formed from 1/4" thick steel,

case hardened for strength• Grease Fittings – Provided in swivel raceway

and wheel bearings• Fork leg spacing 21/2"• Optional Accessories

WHEEL CAPACITYLOAD

HEIGHTSWIVEL RADIUS


APP.WEIGHT

DIAMETER

TREAD WIDTH

TYPE BEARING POUNDS INCHES INCHES

SERIES 81SWIVEL

SERIES 82RIGID POUNDS

4 2

Advantage Flat Roller 350

5 5/8 3 9/16

4-81-220GF 4-82-220GF

6 1/2Poly Loc Grey Roller 600 4-81-220G 4-82-220GPhenolic Plain 700 4-81-122 4-82-122Phenolic Roller 700 4-81-222 4-82-222Polyolefin Plain 500 4-81-531 4-82-531

7 1/2

Polyolefin Roller 500 4-81-532 4-82-532Cast Iron Roller 700 4-81-250 4-82-250

Mold-on Rubber Roller 300 4-81-620 4-82-620Mold-On Rubber(CI) Roller 400 4-81-620CI 4-82-620CI

Mold-on Poly Roller 700 4-81-720 4-82-720Mold-On Poly(CI) Roller 800 4-81-720CI 4-82-720CISolid Elastomer Roller 900 4-81-760 4-82-760Solid Elastomer Prec. Ball 900 4-81-770 4-82-770


number for top plate size desired.

6-81-220GD-1 6-82-220P-1


number for top plate size desired.

SUFFIX NO. OVERALL SIZE BOLT HOLE SPACING BOLT HOLE SIZE1 4 x 4 1/2 2 5/8 x 3 5/8 to 3 x 3 3/82 5 x 5 1/2 41/8 x 41/2 to 4 x 4 3/8


Note: Approximate weights shown are for swivels casters. Rigid casters deduct 11/2 lbs.



WHEEL CAPACITYLOAD

HEIGHTSWIVEL RADIUS


APP.WEIGHT

DIAMETER

TREAD WIDTH

TYPE BEARING POUNDS INCHES INCHES

SERIES 81SWIVEL

SERIES 82RIGID POUNDS

5 2

Advantage Flat Roller 375

6 1/2 4 5/16

5-81-220GF 5-82-220GF

7

Poly Loc Grey Roller 700 5-81-220G 5-82-220GPoly Loc Poly Roller 700 5-81-220P 5-82-220P

Phenolic Plain 800 5-81-122 5-82-122Phenolic Roller 800 5-81-222 5-82-222Polyolefin Plain 650 5-81-531 5-82-531Polyolefin Roller 650 5-81-532 5-82-532Cast Iron Roller 800 5-81-250 5-82-250

8

Mold-on Rubber Roller 450 5-81-620 5-82-620Mold-on Rubber(CI) Roller 500 5-81-620CI 5-82-620CI

Mold-on Poly Roller 800 5-81-720 5-82-720Mold-On Poly(CI) Roller 900 5-81-720CI 5-82-720CISolid Elastomer Roller 900 5-81-760 5-82-760Solid Elastomer Prec. Ball 900 5-81-770 5-82-770

6 2

Advantage Donut Ball 450

7 1/2 5 1/16

6-81-220GDB 6-82-220GDB

8

Advantage Donut Roller 450 6-81-220GD 6-82-220GDAdvantage Flat Roller 600 6-81-220GF 6-82-220GFPoly Loc Grey Roller 800 6-81-220G 6-82-220GPoly Loc Poly Roller 800 6-81-220P 6-82-220P

Phenolic Plain 900 6-81-122 6-82-122Phenolic Roller 900 6-81-222 6-82-222Polyolefin Roller 700 6-81-531 6-82-531Polyolefin Roller 700 6-81-532 6-82-532Cast Iron Roller 900 6-81-250 6-82-250

9


Mold-on Poly Roller 900 6-81-720 6-82-720Hi Modulus Donut Ball 350 6-81-600 6-82-600Mold-On Poly(CI) Roller 900 6-81-720CI 6-82-720CISolid Elastomer Roller 900 6-81-760 6-82-760Solid Elastomer Prec. Ball 900 6-81-770 6-82-770

8 2

Advantage Donut Ball 450

9 1/2 6 1/2

8-81-220GDB 8-82-220GDB

9

Advantage Donut Roller 450 8-81-220GD 8-82-220GDAdvantage Flat Roller 600 8-81-220GF 8-82-220GFPoly Loc Grey Roller 900 8-81-220G 8-82-220GPoly Loc Poly Roller 900 8-81-220P 8-82-220P

Phenolic Plain 900 8-81-122 8-82-122Phenolic Roller 900 8-81-222 8-82-222Polyolefin Plain 900 8-81-531 8-82-531Polyolefin Roller 900 8-81-532 8-82-532Cast Iron Roller 900 8-81-250 8-82-250

10


Mold-on Poly Roller 900 8-81-720 8-82-720Hi Modulus Donut Ball 350 8-81-600 8-82-600Mold-On Poly(CI) Roller 900 8-81-720CI 8-82-720CISolid Elastomer Roller 900 8-81-760 8-82-760

9Solid Elastomer Prec. Ball 900 8-81-770 8-82-770

Note: Approximate weights shown are for swivels casters. Rigid casters deduct 11/2 lbs.


50-51 SERIES BRAKE LOCK AND SWIVEL LOCK CASTERSFEATURES:Medium-Duty swivel casters with or without directional locks and total locks for food service, health care and hospital equipment, utility carts, and portable equipment. Directional locks are available in one or two position. Total lock simultaneously locks the swivel and wheel making the unit stationary. Easy "step-on - step-off" toe mechanisms.

Standard top plates are listed below.Special top plate and stems are availableon quantity orders. Contact the factory for further information.

SERIES 50

5-50-213GD-2BL 5-51-500-2

SERIES 51NOTE: To order rigid casters from chart-

below, change Series No. 50 to 51.



WHEEL CAPACITY LOAD INCHES

SWIVEL INCHES CASTER APP.

WEIGHT

DIA. TREAD TYPE BEAR ING POUNDS INCHES INCHES PLAIN TOTAL

LOCK SWIVEL

LOCK POUNDS

4 11/4

Grey Rubber Tire Ball 200

5 1/8 3 3/4

4-50-113G 4-50-113GBL 4-50-113GSLI

2 3/4

Polyurethane Tire Ball 275 4-50-113P 4-50-113PBL 4-50-113PSLIAdvantage Donut Ball 250 4-50-213GD 4-50-213GD 4-50-213GDSLIAdvantage Donut Delrin 300 4-50-314GD 4-50-314GD 4-50-314GDAdvantage Flat Ball 250 4-50-213GF 4-50-213GF 4-50-213GFSLIAdvantage Flat Delrin 300 4-50-314HF 4-50-314GF 4-50-314GFSLIPoly Loc Grey Ball 275 4-50-213G 4-50-213GBL 4-50-213GSLIPoly Loc Poly Ball 275 4-50-213P 4-50-213PBL 4-50-213PSLI

5 11/4

Rubber Donut Ball 200

6 1/4 4 1/4

5-50-500 5-50-500BL 5-50-500SLI

3

Grey Rubber Tire Ball 200 5-50-113G 5-50-113GBL 5-50-500GSLIPolyurethane Tire Ball 300 5-50-113P 5-50-113GPBL 5-50-113PSLIAdvantage Donut Ball 250 5-50-213GD 5-50-213GD 5-50-213GDSLIAdvantage Flat Delrin 325 5-50-314GD 5-50-314GD 5-50-314GD

Advantage Donut Ball 250 5-50-213GF 5-50-213GF 5-50-213GFSLIAdvantage Flat Delrin 325 5-50-314GF 5-50-314GF 5-50-314GFSLIPoly Loc Grey Ball 300 5--50-213G 5-50-213GBL 5-50-213GSLIPoly Loc Poly Ball 300 5-50-213P 5-50-213PBL 5-50-213PSLI

6 11/4

Rubber Donut Ball 220

7 1/4 4 3/4

6-50-500 6-50-500BL 6-50-500SLI

3 1/2

Grey Rubber Tire Ball 250 6-50113G 6-50-113GBL 6-50-113GSLIPolyurethane Tire Ball 300 6-50-113P 6-50-113PBL 6-50-113PSLIAdvantage Donut Ball 300 6-50-213GD 6-50-213GD 6-50-213GDSLIAdvantage Flat Delrin 300 6-50314GD 6-50-314GD 6-50-314GDPoly Loc Grey Ball 300 6-50-213G 6-50-213GBL 6-50-213GSLIPoly Loc Poly Ball 300 6-50-213P 6-50-213PBL 6-50-213PSLI

SUFFIX NO. TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE2 2 3/8 x 3 5/8 1 3/4" 5/16

50MG-54MG-56MG FUTURA BRAKE LOCK AND SWIVEL LOCK HEALTH CARE CASTERS

5-50MG-213GP APSL

• Total locks are available - locks swivel and wheel simultaneously; also available with singleposition directional lock for straight tracking

• Available with tough Jarvis Poly-Loc polyurethane or Advantage TPR wheels for smooth, super quiet operation

• Ultra-low maintenance• Great aesthetics with attractive optional thread guards and axle caps available

on standard casters

To order optional thread guards, add suffix TG.

To order axle caps on standard casters, add suffix A

STEM CASTERS To order any stem caster, change the series number 50MG to 54MG or 56MG andspecify the desired stem.

When you want to enhance appearance and provide maintenance-free equip-ment to your customer, specify brand new FUTURA casters for all your designs. These casters outperform everything else in their class - theyʼre smooth, quiet, attractive, and super-tough all at once.

FUTURA casters represent the future of caster technology for the most demanding institutional uses; they have the aesthetics expected by high-end cart designers, and the performance and value needed to put these casters into the broadest range of applications.

FUTURA casters are available with all metal parts made of stainless steel. Order by adding S before series number; for example, change 5-50MG-314GD to 5-S50MG-314GD


WHEEL CAPAC-ITY

LOAD HEIGHT

SWIVEL RADIUS TOP PLATE CASTER ORDERING NUMBER

DIA TREAD WIDTH TYPE BEAR-

ING POUNDS INCHES INCHES PLAIN TOTAL LOCK SWIVEL LOCK

5 1 1/4

Advantage Round Delrin

250 6 3/8

4plain5-50MG-314GD 5-50MG-314GD APSL 5-50MG-314GDSLI

Advantage Flat Delrin 5-50MG-314GF 5-50MG-314GF APSL 5-50MG-314GFSLIPolyurethane Delrin Delrin 5-50MG-314GP 5-50MG-314GP APSL 5-50MG-314GPSLIAdvantage Round Ball 5

w/lockor brake

5-50MG-213GD 5-50MG-213GD APSL 5-50MG-213GDSLIAdvantage Flat Ball 5-50MG-213GF 5-50MG-213GF APSL 5-50MG-213GFSLI

Polyurethane Delrin Ball 5-50MG-213GP 5-50MG-213GP APSL 5-50MG-213GPSLI*Standard top plate: 23/8 x 35/8 with 13/4 x 3 bolt hole spacing for 5/16 bolt; for other options contac the factory

STANDARD STEM SIZES

SPRING RING MOUNT 54Mg

THREADED MOUNT 56Mg

.845"dia. x 23/16 1/2-13 x 1"

.865"dia. x 23/16.860"sq. x 23/16 1/2-13 x 11/2"

Other size options are available please contact the factory for further information.

130-131 SERIES MEDIUM DUTYFEATURES:• Finish – Bright zinc plating• Swivel – Double ball bearing with hardened

raceways for extra strength• Dust Cover – Helps protect swivel bearings• Construction – Heavy gauge cold rolled steel,

formed for strength and heat treated• Axle – 3/8" diameter on wheel sizes 3"- 5";

1/2" diameter on 6" and 8" wheels• King Pin – 1/2" steel rivet, hydraulically upset• Fork leg spacing - 2"• Optional Accessories.

SERIES 130 SERIES 131

STANDARD TOP PLATE SIZES

NOTE: Add correct suffix number for top plate size desired; see chart.



SWIVEL RADIUS CASTER ORDERING NUMBER

DIA. TREAD WIDTH TYPE BEARING POUNDS INCHES INCHES SERIES

130SERIES

131SERIES

134SERIES

1363 2 Polyolefin Roller 400 4 2 3/8 3-130-532 3-131-532 3-134-532 3-136-532

4

1 5/8"

Soft Rubber Plain 225

5- 3/8 3- 1/2

4-130-109 4-131-109 4-134-109 4-136-109Hard Rubber Plain 400 4-130-110 4-131-110 4-134-110 4-136-110Soft Rubber Roller 225 4-130-209 4-131-209 4-134-209 4-136-209Hard Rubber Roller 400 4-130-210 4-131-210 4-134-210 4-136-210

1 1/2"

Phenolic Plain 400 4-130-121 4-131-121 4-134-121 4-136-121Phenolic Roller 400 4-130-221 4-131-221 4-134-221 4-136-221Polyolefin Plain 400 4-130-521 4-131-521 4-134-521 4-136-521Polyolefin Roller 400 4-130-522 4-131-522 4-140-522 4-136-522Cast lron Roller 400 4-130-230 4-131-230 4-134-230 4-136-230

5

1 5/8 Soft Rubber Plain 260

6 1/4 4

5-130-109 5-131-109 5-134-109 5-136-109Hard Rubber Plain 400 5-130-110 5-131-110 5-134-110 5-136-110Soft Rubber Roller 260 5-130-209 5-131-209 5-134-209 5-136-209Hard Rubber Roller 400 5-130-210 5-131-210 5-134-210 5-136-210

1 1/2" Phenolic Plain 400 5-130-121 5-131-121 5-134-121 5-136-121Phenolic Roller 400 5-130-221 5-131-221 5-134-221 5-136-221Polyolefin Plain 400 5-130-521 5-131-521 5-134-521 5-136-521Polyolefin Roller 400 5-130-522 5-131-522 5-134-522 5-136-522Cast lron Roller 400 5-130-230 5-131-230 5-134-230 5-136-230

SUFFIX NO. OVERALL SIZE BOLT HOLE SPACING BOLT HOLE SIZE1 2 3/8" x 3 5/8" 1 3/4" x 3 3/8"2 2 3/8" x 3 5/8" 1 3/4" x 3" 5/16"3 3 1/8" x 4 1/8" 2 3/8" x 3 7/16" 5/16"4 4" x 4" 3" x 3" 3/8"5 3 3/4" x 4 1/2" 2 5/8" x 3 5/8" to 3" x 3" 3/8"

SERIES 134Standard Spring Ring Stems 3/4" dia. x 23/16" 13/16" dia. x 23/16" .845 dia. x 23/16" .865 dia. x 23/16" 1" dia. x 23/16" .860 square x 23/16"

SERIES 136Standard Threaded Stems 1/2-13 x 3/4" 1/2-20 x 2 1/4" 1/2-13 x 1" 5/8-11 x 1 1/4" 1/2-13 x 1 1/2" 5/8-18 x 1 3/4" 1/2-20 x 3/4" 3/4-10 x 1"

Note: Many other stem sizes are availableon request. Contact the factory for more information.

134-136 SERIES MEDIUM DUTY

* For stem type casters, deduct 3/16" from load height


WHEEL CAPAC-ITY

LOAD HEIGHT

SWIVEL RADIUS CASTER ORDERING NUMBER


ING POUNDS INCHES INCHES SERIES 130

SERIES 131

SERIES 134

SERIES 136

5 1 1/2"Advanntage Rubber Roller 400

6 1/4 45-130-215GF 5-131-215GF 5-134-215GF 5-136-215GF

Poly Loc Grey Roller 400 5-130-215G 5-131-215G 5-134-215G 5-136-215GPoly Loc Poly Roller 400 5-130-215P 5-131-215P 5-134-215P 5-136-215P

6 1 1/2"

Phenolic Plain 400

7 1/2 4 3/4

6-130-121 6-131-121 6-134-121 6-136-121Phenolic Roller 400 6-130-221 6-131-221 6-134-221 6-136-221Polyolefin Delrin 400 6-130-523 6-131-523 6-134-523 6-136-523Polyolefin Roller 400 6-130-525 6-131-525 6-134-525 6-136-525

Advanntage Rubber Roller 400 6-130-215GF 6-131-215GF 6-134-215GF 6-136-215GFPoly Loc Grey Roller 400 6-130-215G 6-131-215G 6-134-215G 6-136-215GPoly Loc Poly Roller 400 6-130-215P 6-131-215P 6-134-215P 6-136-215P

8 1 1/2"

Advanntage Rubber Roller 250

9 1/2 6 1/2

8-130-215GF 8-131-215GF 8-134-215GF 8-136-215GFPoly Loc Grey Roller 250 8-130-251G 8-131-251G 8-134-251G 8-136-251GPoly Loc Grey Roller 250 8-130-215P 8-131-215P 8-134-215P 8-136-215P

Polyolefin Delrin 250 8-130-523 8-131-523 8-134-523 8-136-523Polyolefin Roller 250 8-130-525 8-131-525 8-134-525 8-136-525

Semi Pneumalic Ball 150 8-130-920 8-131-920 8-134-920 8-136-920


We offer this medium duty stainless steel caster series with top plates and stems. The top plate and stems listed are stainless steel. Stainless steel brakes are available on all swivel series and one position stainless steel swivel locks are available on top plate casters.

Note: To order any stem caster shown above, change the caster ordering number to the series number desired. Be sure to specify thestem size. Deduct 1/8" from load height when using a stem caster.Example: Plate caster 5-S30-105N to threaded stem caster 5-S36-105N with 1/2-13 x 1 1/2" stem.

SERIES S30, S31, S32, S34, S36 AND S40 Stainless Steel

WHEEL CAPACITY LOAD

INCHESSWIVEL INCHES

CASTER APP.WEIGHT POUNDS DIA. TREAD TYPE BEARING SERIES S 30 SERIES S 31

4 1 1/4

Neoprene Delrin 180

5 1/4 3 1/2

4-S30-105N 6-S30-121

2 1/4

Advantage Donut Delrin 250 4-S30-314GD 4-S31-314GDAdvantage Flat Delrin 300 4-S30-314GF 4-S31-314GFPolyolefin S.S.Sleeve 300 4-S30-513 4-S31-513Poly Loc Grey Delrin 300 4-S30-314G 4-S31-314G

1 1/2 Phenolic S.S.Sleeve 300 4-S30-121 4-S31-121

5 1 1/4

Neoprene Delrin 200

6 1/8 4

5-S30-105N 5-S31-105N

2 1/3

Advantage Donut Delrin 250 5-S30-314GD 5-S31-314GD

Advantage Flat Delrin 300 5-S30-314GF 5-S31-314GFPolyolefin S.S.Sleeve 300 5-S30-513 5-S31-513Polyurethane S.S.Sleeve 300 5-S30-113P 5-S31-113PPoly Loc Grey Delrin 300 5-S30-314G 5-S31-314G


6 1 1/4

Neoprene Delrin 220

7 3/16 4 1/2

6-S30-105N 6-S31-105N

3 1/4

Advantage Donut Delrin 300 6-S30-314GD 6-S31-314GDPolyolefin S.S.Sleeve 300 6-S30-521 6-S31-521Poly Loc Grey S.S.Sleeve 300 6-S30-213G 6-S31-213GPoly Loc Grey Delrin 300 6-S30-314G 6-S31-314G



S71-S72 SERIES STAINLESS STEEL PLATE CASTERS - HEAVY DUTY

Heavy duty stainless steel plate casters are available in 5", 6" and 8" diameters. All metal parts are stainless steel, making this caster highly resistant to conditions that can promote corrosion. Completely stainless wheel brakes and swivel lock options are available. Stainless steel casters are designed to stop rusting and corrosion in wet and damp conditions, or in other corrosive environments. These casters lend themselves to use in applications such as food, diary, meat packing plants, pharmaceutical houses and hospitals. Stainless steel is impervious to repeated washings, thereby reducing maintenance and providing long life to caster and equipment.



WHEEL CAPACITY LOADINCHES

SWIVELINCHES

CASTER ORDERING APP.WEIGHTPOUNDSDIA. TREAD TYPE BEARING POUNDS SERIES S71 SERIES S72

5 2"

Advantage Flat Delrin 375

6 1/2 4 5/16

5-S71-320GF 5-S72-320GF

5 1/2

Solid Elastomer Delrin 900 5-S71-761 5-S72-762Poly Loc Poly Delrin 700 5-S71-320P 5-S72-320PMold-on Poly Delrin 900 5-S71-721 5-S72-721Phenolic Plain 900 5-S71-122 5-S72-122Polyolefin plain 650 5-S71-531 5-S72-531

5 5"

Advantage Donut Delrin 450

7 1/2 5 1/16

6-S71-320GD 6-S72-320GD

6 1/2

Advantage Flat Delrin 600 6-S71-320GF 6-S72-320GFSolid Elastomer Delrin 900 6-S71-761 6-S72-762Poly Loc Poly Delrin 800 6-S71-320P 6-S72-320PMold-on Poly Delrin 900 6-S71-721 6-S72-721Phenolic Plain 900 6-S71-122 6-S72-122Polyolefin Plain 700 6-S71-531 6-S72-531

8" 2"

Advantage Donut Delrin 500

9 1/2 6 1/2

8-S71-320GD 8-S72-320GD

8

Advantage Flat Delrin 675 8-S71-320GF 8-S72-320GFSolid Elastomer Delrin 900 8-S71-761 8-S72-762Poly Loc Poly Delrin 900 8-S71-320P 8-S72-320PMold-on Poly Delrin 900 8-S71-721 8-S72-721Phenolic Plain 900 8-S71-122 8-S72-122Polyolefin Plain 850 8-S71-531 8-S72-531

TOP PLATE SIZE BOLT HOLE CENTERS ATTACHING BOLT SIZE3 3/4" x 4 1/2" 2 5/8" x 3 5/8" to 3" x 3" 3/8"

6-S71-320GD

SERIES S71 SERIES S72

6-S72-320GP

ACCESSORIES BUMPERS, LEG LEVELERS, and TUBING APPLICATORS

APPLICATOR NUMBER

TUBING ID SIZE RANGE PARTS IN APPLICATOR KIT(INCHES) (INCHES) RUBBER KNURLED

BUSHINGPLAIN

BUSHINGBASE

WASHER9 3/4 0.720-0.851 1644-00 1421-02 1429-02 1709-0211 7/8 0.852-0.927 1645-00 1435-02 1432-02 1709-0213 1 0.928-1.029 1646-00 1435-02 1432-02 1709-0215 1 1/8 1.030-1.140 1647-00 1436-02 1431-02 1709-02

17B 1 3/16 1.178-1.303 1651-00 1441-02 1430-02 1709-0219C 1 3/8 1.360-1.425 1648-00 1438-02 1433-02 1709-0219A 1 1/2 1.426-1.589 1649-00 1437-02 1434-02 1709-02

21 1 7/8 1.790-1.850 1650-00 1 4222-02 1440-02 1473-02

PART NUMBER

PAD DIA.

STEM LENGTH

1098-03 1 1/2" 5/8-11 x 2.401097-03 2 1/2" 5/8-11 x 3.251099-03 2 1/2" 5/8-11 x 3.80589-03 1 1/2" 5/8-11 x 3.25

END BUMPER B-1 CORNER BUMPER B-8 CORNER BUMPER B-10 CORNER BUMPER B-12Grey end bumper generally used on the ends of tubular handles; 3 1/4 diameter with steel insert for 5/16 bolt.

Grey corner bumper for mount-ing on flat surfaces. 7/8 thick x 1” high x 2-5/8 long from inside corner.

Grey corner bumper for mount-ing on flat surfaces; ends of legs are tapered, with steel inserts. 1” thick x 1-1/16” high x 3-1/16” long from inside corner.

Grey corner bumper for mounting on flat surfaces; ends of legs maybe cut at notched area to make square ends, with steel inserts. 7/8” thick x 1” high x 3-1/8” long from inside corner.

TUBING BUMPER B-3 1/2 ROLLING BUMPER B-5 & B-7 LEG LEVELERS3-1/2” diameter bumper fits 1” O.D. round or square tubing; please specify.

5" and 7" diameter rolling bump-ers; tapered grey rubber bonded to a zinc-plated insert with removable center bushings to fit diameters from 3/8" to 1 1/8"

Adjustable levelers with 1 1/2" or 2 1/2" diameter pad and 5/8 - 11 threaded stem; black oxide finish

TUBING APPLICA-

TORPlastic ap-plicator ac-cepts 7/16" dia. spring ring stem; Metal ap-plicator ac-cepts 7/16" dia. straight stem.

TUBING OD PLASTIC, ROUND

PLASTIC, SQUARE METAL

3/4-16 ga. 1085 1086 -7/8-16 ga. 1087 1088 -1-16 ga. 1089 1090 10701-18 ga. 1084 1091 1071

1 1/2-18 ga. - 1082 -


16787 Beach Blvd. #271, Huntington Beach, CA 92647Toll free: 888-458-9717 - Phone: 714-848-4118 - Fax: 714-848-6240

Website: www.casterindustries.com Email: [email protected]

%orrpilhog 6wuhhw /rv $odplwrv &$ 7roo iuhh 3krqh … · parts are not damaged. thread guards...

Documents