osc kerb.pdf
DESCRIPTION
socTRANSCRIPT
Visit our website: www.killeshal.com
building into the future since 1969
kilform
253/09/09
KERB RANGE• Half Batter Pressed Kerbs• Full Batter Pressed Kerbs• Drop Pressed Kerbs• Bullnose Pressed Kerbs• Special Kerbs• Corners and Quadrants
• Garden Edgings• Special Wetcast Kerbs• Aggregate Kerbs• Natural Stone Kerbs• Channel Kerbs• Safety Kerbs
ROAD GULLY AND LIDS• Untrapped Gully• Trapped Gully• Large Trapped Gully
• Gully Risers• Cast Iron Free Flow Lids
BUS STOP KERBS• Standard Profiles• Transition Kerbs
TRAFFIC MANAGEMENT• Sleeping Policeman• Traffic Calming• Wheel Stops
HIGH CONTAINMENT KERBS(Traffic Management Kerbs)• Standard• Quadrants and Corners• Tapers
Specials made to order
kerb and gully range
KILLESHAL’S KERB RANGE ARE MANUFACTURED TO RELEVANT STANDARDS:BS 7263-1 (2001) - Precast Concrete Flags, Kerbs, Channels, Edgings and Quadrants - Part 1: Precast,
Unreinforced Concrete Paving Flags & Complementary Fittings - Requirements &Test Methods.
IS EN 1340 - Concrete Kerb Units - Requirements and Test Methods.IS 146 - Precast Concrete Kerbs, Channels, Edgings and Quadrants.
Daingean, Co. Offaly, Ireland. Tel: +353 57 9353018 Email: [email protected]
Visit our website: www.killeshal.com
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are givenas a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
KE
RB
RA
NG
E
HALF BATTER PRESSED KERBS REFERENCE 914mm 457mm 301mm
10” x 5” x 3’ (254x116x914mm) K/142 • • •7” x 5” x 3’ (178x116x914mm) K/143 • • •
12” x 6” x 3’ (300x150x914mm) K/160 • • •6” x 5” x 3’ (155x116x914mm) K/196 • • •
FULL BATTER PRESSED KERBS REFERENCE 914mm 457mm 301mm
10” x 6” x 3’ (255x150x914mm) K/159 • • • 10” x 5” x 3’ (255x125x914mm) K/155 • • • 7” x 5” x 3’ (175x125x914mm) K/183 • • •
• 12” x 6” x 3’ (300x150x914mm)
FULL BATTER PRESSED KERBS• 10” x 6” x 3’ (255x150x914mm)
• 10” x 5” x 3’ (255x125x914mm) • 7” x 5” x 3’ (175x125x914mm)
Ref: K/142 Ref: K/143
HALF BATTER PRESSED KERBS• 10” x 5” x 3’ (254x116x914mm) • 7” x 5” x 3’ (178x116x914mm)
To suit Ref: K/176
Ref: K/160
Ref: K/159
Special granite andnatural stone kerbsalso available
Ref: K/155 Ref: K/183
Other sizes available contactKilleshal’s customer service on +353 57 9353018
PAGE
2
• 6” x 5” x 3’ (155x116x914mm)
Ref: K/196
Daingean, Co. Offaly, Ireland. Tel: +353 57 9353018 Email: [email protected]
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are givenas a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
Typical Gateway DetailOther sizes available contact Killeshal’s customer service on +353 57 9353018
Killeshal Precast Concrete Ltd are capableof producing 4.5 km of concrete kerbs perday using the hydraulic press manufacturingtechnique.
GATEWAY DROP PRESSED KERBS REFERENCE 914mm 457mm 301mm
10” x 5” x 3’ (254 to 178x116x914mm) K/176 • 10” x 5” x 3’ (255 to 155x116x914mm) K/168 •
BULLNOSED PRESSED KERBS REFERENCE 914mm 457mm 301mm
12” x 6” x 3’ (305x152x914mm) K/148 • • • 10” x 4½” x 3’ (254x116x914mm) K/145 • • •
6” x 5” x 3’ (155x125x914mm) K/167 • 10” x 4” x 3’ (254x100x914mm) K/152 • • •
GATEWAY DROP PRESSED KERBS• 10” x 5” x 3’ (254 to 178x116x914mm)
To suit Ref: K/143• 10” x 5” x 3’ (255 to 155x116x914mm)
To suit Ref: K/167
Ref: K/176 Ref: K/168
BULLNOSED PRESSED KERBS• 12” x 6” x 3’ (305x152x914mm) • 10” x 4½” x 3’ (254x116x914mm)
• 6” x 5” x 3’ (155x125x914mm)To suit Ref: K/168
• 10” x 4” x 3’ DOUBLE BULLNOSED(254x100x914mm)
Ref: K/145Ref: K/148
Ref: K/152Ref: K/167
KE
RB
RA
NG
E
PAGE
3Other sizes available: +353 57 9353018
Daingean, Co. Offaly, Ireland. Tel: +353 57 9353018 Email: [email protected]
Technical Queries: +353 57 9353018
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are givenas a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
4
KE
RB
RA
NG
E
SPECIAL KERBS• 250 x 220 x 1000mm • 375 x 275 x 830mm • 400 x 300 x 790mm
Killeshal’s Typical Quadrant/Corner and Kerb Details INTERNAL CORNER• 10” x 5” (254x116x417mm)
Ref: K/185 Ref: K/118 Ref: K/154
Ref: K/151
90° EXTERNAL QUADRANT• 254 x 150 x 300mm
Ref: K/130
Other sizes available contact Killeshal’scustomer service on +353 57 9353018
SPECIAL KERBS REFERENCE 1000mm 914mm 830mm 790mm 417mm 301mm
250 x 220 x 1000mm K/185 •375 x 275 x 830mm K/118 •400 x 300 x 790mm K/154 •
CORNER & QUADRANT KERBS REFERENCE 1000mm 914mm 830mm 790mm 417mm 301mm
10” x 5” CORNER (254x116x417mm) K/151 •90° QUADRANT (254x150x300mm) K/130 •
GARDEN EDGINGS REFERENCE 1000mm 914mm 830mm 790mm 417mm 301mm
5” x 4” x 3’ (132x89x914mm) K/140 • 6” x 2” x 3’ (152x54x914mm) K/157 • 6” x 2” x 3’ (152x54x914mm) K/158 •
GARDEN EDGINGS• 5” x 4” x 3’ WETCAST
(132x89x914mm)• 6” x 2” x 3’ FLAT TOP WETCAST
(152x54x914mm)• 6” x 2” x 3’ ROUND TOP WETCAST
(152x54x914mm)
Ref: K/140 Ref: K/157 Ref: K/158
Daingean, Co. Offaly, Ireland. Tel: +353 57 9353018 Email: [email protected]
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are givenas a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
5
SPECIAL WETCAST KERBS• 380 x 90 x 900mm • 300 x 225 x 1000mm
SPECIAL WETCAST KERBS REFERENCE 1000mm 914mm 900mm 300mm
380 x 90 x 900mm K/165 •300 x 225 x 1000mm K/188 •
AGGREGATE PRESSED KERBS REFERENCE 1000mm 914mm 900mm 300mm
250 x 150 x 914mm K/174 •255 x 145 x 914mm K/170 •
NATURAL STONE KERBS REFERENCE 1000mm 914mm 900mm 300mm
200 x 150 x 1000mm K/192 • •175 x 300 x 1000mm K/193 • •175 x 450 x 1000mm K/194 • •175 x 100 x 1000mm K/189 • •250 x 125 x 1000mm K/190 • •250 x 145 x 1000mm K/191 • •
NATURAL GRANITE AGGREGATE PRESSED KERBS• 250 x 150 x 914mm • 255 x 145 x 914mm
NATURAL STONE KERBS• 200 x 150 x 1000mm • 175 x 300 x 1000mm • 175 x 450 x 1000mm
• 175 x 100 x 1000mm • 250 x 125 x 1000mm • 250 x 145 x 1000mm
Ref: K/165 Ref: K/188
Ref: K/170Ref: K/174
Ref: Dub. Corp. K/192
Ref: K/189 Ref: K/190 Ref: K/191
KE
RB
RA
NG
E
Ref: Dub. Corp. K/193 Ref: Dub. Corp. K/194
More profiles visit: www.killeshal.com
Daingean, Co. Offaly, Ireland. Tel: +353 57 9353018 Email: [email protected]
Visit our website: www.killeshal.com
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are givenas a indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
CHANNEL KERBS• 10” x 5” x 3’ (255x125x914mm) • 12” x 6” x 3’ (305x150x914mm)
• ULMA DRAINAGE KERB(254x116x300mm)
• 340 x 125 x 1200mm • 460 x 75 x 400mm
Other sizes availablecontact Killeshal’scustomer service on +353 57 9353018
Typical Safety Kerb DetailsKE
RB
RA
NG
E
• DBA SAFETY KERB(250x257x232x914mm)
• DBK SAFETY KERB(325x270x70x914mm)
• DBM STEEL SAFETY KERB(250x257x232x914mm)
• SILT BOX (250x450x310x550mm) AND LID (65x270x400mm)
• INSPECTION BOX (250x257x232x914mm) AND LID (30x125x780mm)
To suit:- Ref: K/ 117- Ref: K/116- Ref: K/117b
To suit:- Ref: K/ 117- Ref: K/116- Ref: K/117b
Ref: K/144 Ref: K/187
NEW!
Ref: K/111 Ref: K/156
Ref: K/117 Ref: K/116 Ref: K/117b
Ref: K/114 Ref: K/115
PAGE
6
Ref: K/195
SAFETY KERBS