output interfaces - teletask smart home solutions - teletask · output interfaces ©, teletask,...

Output interfaces ©, TELETASK, GENT, 2018 107 Version May 2018 TDS13634 PWM LED Dimmer 4x3,1A (4x75W @ 24V) The TDS13634 is a four channel PWM dimmer on AUTOBUS to control DC dimmable LED light systems (e.g. LED strips). The interface can dim any monochrome or colour LED system, from cold to warm light including RGB and RGBW for standard and high end residential and professional applications. The TELETASK PWM dimmer has the advantage over other dimmers that it offers smooth dimming from 1% to 100%. Due to the TELETASK high frequency TPWM control, it results in a stable luminosity control over the full dimming range. The TELETASK PWM dimmer unit is also available in a two-channel high power version ref. TDS13632. APPLICATION Four channel PWM dimmer for monochrome/colour LED light strips CHARACTERISTICS Protection Internal 15A short circuit fuse and internal thermal overload protection. The AUTOBUS is internal galvanic isolated from the output circuits. Spare fuses: order ref. TDS90169 – pack of 10 ultra mini fuses 15A Configuration The configuration via PROSOFT includes different ramp speed settings on both fade-in and fade-out. Individual ramp speed can be set on every individual AUTOBUS control button. Several more settings are possible: last dim level memory, go to specific level, moods, timers, etc… SETTINGS Configuration Via PROSOFT Suite (3.6.14 or higher). AUTOBUS address Via two rotary switches "Tens" & "units". Jumper Terminating resistor (supplied with the interface). To be used when the interface is at the physical end of the AUTOBUS cable. INSTALLATION DIN-rail mounting 3 modules wide. CONNECTIONS AUTOBUS AUTOBUS connector set + patch cable (supplied with the interface). 12V (supplied by the AUTOBUS - minimum 9V). Can be checked in PROSOFT diagnostics. Power supply input (LED) Only suitable for constant voltage LED drivers. Power supply (+, 0V): 6-30 V DC max. Depending of the LED system. Screw terminals; max. 4mm² (solid) (AWG 12) or 2,5mm² (stranded) (AWG 14). LED outputs 4 x 3,1A (=4x75W @ 24VDC) (12,5A total). Screw terminals: max. 4mm² (solid) (AWG 12) or 2,5mm² (stranded) (AWG 14). POWER CONSUMPTION AUTOBUS 40mA Max. (20mA Standby) DIMENSIONS 54 W x 90 H x 60 D (mm) NET | GROSS WEIGHT 0,090 kg | 0,210 kg PACKAGING CONTENT TDS13634 interface AUTOBUS connector set + terminating resistor AUTOBUS Patch cable STORAGE Temperature -20°C to +65°C Relative humidity 15% to 85% IP PROTECTION RATE IP20 OPERATING RANGE Temperature 0°C to +50°C max. Relative humidity 5% to 85% at 25°C (non-condensing ambient) EN TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice

Upload: buikiet

Post on 22-Aug-2018

220 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Output interfaces

©, TELETASK, GENT, 2018 107 Version May 2018

TDS13634 PWM LED Dimmer 4x3,1A (4x75W @ 24V)

The TDS13634 is a four channel PWM dimmer on AUTOBUS to control DC dimmable LED light systems (e.g. LED strips). The interface can dim any monochrome or colour LED system, from cold to warm light including RGB and RGBW for standard and high end residential and professional applications. The TELETASK PWM dimmer has the advantage over other dimmers that it offers smooth dimming from 1% to 100%. Due to the TELETASK high frequency TPWM control, it results in a stable luminosity control over the full dimming range. The TELETASK PWM dimmer unit is also available in a two-channel high power version ref. TDS13632.

APPLICATION

Four channel PWM dimmer for monochrome/colour LED light strips

CHARACTERISTICS

Protection

Internal 15A short circuit fuse and internal thermal overload protection. The AUTOBUS is internal galvanic isolated from the output circuits. Spare fuses: order ref. TDS90169 – pack of 10 ultra mini fuses 15A

Configuration

The configuration via PROSOFT includes different ramp speed settings on both fade-in and fade-out. Individual ramp speed can be set on every individual AUTOBUS control button. Several more settings are possible: last dim level memory, go to specific level, moods, timers, etc…

SETTINGS

Configuration

Via PROSOFT Suite (3.6.14 or higher).

AUTOBUS address

Via two rotary switches "Tens" & "units".

Jumper

Terminating resistor (supplied with the interface). To be used when the interface is at the physical end of the AUTOBUS cable.

INSTALLATION

DIN-rail mounting

3 modules wide.

CONNECTIONS

AUTOBUS

AUTOBUS connector set + patch cable (supplied with the interface). 12V (supplied by the AUTOBUS - minimum 9V). Can be checked in PROSOFT diagnostics.

Power supply input (LED)

Only suitable for constant voltage LED drivers. Power supply (+, 0V): 6-30 V DC max. Depending of the LED system. Screw terminals; max. 4mm² (solid) (AWG 12) or 2,5mm² (stranded) (AWG 14).

LED outputs

4 x 3,1A (=4x75W @ 24VDC) (12,5A total). Screw terminals: max. 4mm² (solid) (AWG 12) or 2,5mm² (stranded) (AWG 14).

POWER CONSUMPTION

AUTOBUS

40mA Max. (20mA Standby)

DIMENSIONS

54 W x 90 H x 60 D (mm)

NET | GROSS WEIGHT

0,090 kg | 0,210 kg

PACKAGING CONTENT

TDS13634 interface AUTOBUS connector set + terminating resistor AUTOBUS Patch cable

STORAGE

Temperature

-20°C to +65°C

Relative humidity

15% to 85%

IP PROTECTION RATE

IP20

OPERATING RANGE

Temperature

0°C to +50°C max.

Relative humidity

5% to 85% at 25°C (non-condensing ambient)

TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice

Output interfaces

©, TELETASK, GENT, 2018 108 Version May 2018

SCHEMATIC DRAWING

TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice

EPS 16 PORT POWER DISTRIBUTION UNIT · 2020-04-05 · EPS 16 PORT POWER DISTRIBUTION UNIT. OUTPUT OPTIONS: ·16 12AWG-24AWG Interfaces ·98W Per Output ·56VDC ·Optional Integrated

Section II. I/O Interfaces · for registering input, output, output-enable signals, and complete embedded bidirectional single-data rate transfer. I/O pins support various single-ended

Improving Worker Engagement Through Conversational ...gadiraju/publications/CHI2020.pdf · conversational interfaces with similar output quality compared to the traditional Web interfaces

THE INPUT/OUTPUT YSTEM - TheLearningPit - PLC · PDF fileThe Input/Output System 2 Module 2 2-1 Types of Input/Output Devices A MicroLogix 1000 PLC uses its input and output interfaces

Analog Output Interfaces - scale service · PLC and Analog Output Interfaces D14884200A ... Quantum 242 02 PLC with NOM 211 00 Module ... METTLER TOLEDO JAGXTREME PLC and Analog Output

Computer Input/Output Ports and Interfacess3.amazonaws.com/jigyaasa_download/ComputerPorts...Computer Input/Output Ports and Interfaces 6 Port or interface name Data width Data transfer

Graphical User Interfaces. Graphical input and output with JOptionPane

Data Sheets - TELETASK

Catalog TELETASK 2012-2013 - Screen

Chapter 3 Interfaces Between You and the Computer Computer Components & Networks, 2002 Input/Output Hardware

Chapter 5 Input/Output 5.5 - 5.8 Clocks User Interfaces: Keyboard, Mouse Power

Universal solutions for PLC input/output cards · The range includes passive input/output interfaces for digital and analogue signals and relay boards to insulate the input and output