p r e s e n t. we appreciate the opportunity to introduce you to our water based, (not petroleum or...
TRANSCRIPT
P R E S E N T
SAS PRODUCTSA NEW TECHNOLOGY
We appreciate the opportunity to introduce you to our water based, (not petroleum or acid based), chemicals that dissolve the paraffin in crude oil and natural gas
All SAS chemicals are non-flammable, non-toxic, non-corrosive and entirely environmentally friendly
PRODUCTS TYPES :
1- SAS-A
2- SAS-B
3- SAS-C
SAS-A dissolves the paraffin in BS&W, (tank bottoms), in crude oil storage tanks and when blended with added fresh crude emulsifies it into a high grade saleable crude
It also lowers the sulfur content and NORM in the crude
After treatment, the tank is allowed to set for several hours and the water and sand will settle to the bottom and can be drained or pumped out thru the water draw valve
The rest is good marketable crude oil free of BS&W
SAS-A
Treating a crude storage tank with SAS-A eliminates the need to gas free the tank, cut a door sheet or the need to have personnel or equipment enter the tank
The treatment process can be completed in 7-10 days and the tank returned to service
When SAS-A is injected into the tank receipt line the result will be BS&W free crude and eliminating costly tank cleaning
Please refer to the test report from Dallas Laboratories and the accompanying letters of reference
SAS-A, CONT.
SLUDGE
ADD 5% TO 10% SAS AADD 150% TO 200% CRUDE
LET TANK SET FOR 4-12 HOURS
AGITATE VERY BRISKLY
LET TANK SET FOR 24 HOURS
INSTRUCTIONS PROCESS FOR TREATING TANK BOTTOM SLUDGE USING SAS-A
MARKETABLE CRUDE OIL
SANDWATER
STEP 1
STEP 5
STEP 2
STEP 3
STEP 4
STEP 6
SELL CRUDE
PUMP OUT WATER & SANDNow Tank Bottom is
100% clean
SAS-B is designed for down-hole treatment When introduced down-hole SAS-B will dissolve
the paraffin build up in submersible pumps, the production tube and the feeder line to the storage tanks
When introduced into the formation under pressure, SAS-B will dissolve the paraffin and allow the crude to flow more freely into the well reservoir
The result is a significant increase in production For continuous treatment both applications can
be achieved by adding a SAS injection system
SAS-B
IF YOU HAVE LOW OIL WELL PRODUCTION
DUE TO SLUDGE CLOSING PIPE CASING
LIKE THIS PHOTO
SAS B
SIMPLY INJECT SAS ‘B’ INTO WELL CASING ,,, SAS WILL EMULSIFY SLUDGE WITHIN FEW HOURS AND ALLOW SMOOTH FLOW OF
CRUDE GOING UP AS YOU SEE IN THE RIGHT GRAPHIC ANIMATION
OR LIKE THIS …SAS ‘B’ CAN INCREASE WELL PRODUCTION WITH SIMPLE PROCEDURE AND
IT IS SAFE FOR ALL TYPES OF PIPES AND
EQUIPMENTS
THE CASING PIPE WILL BE LIKE THIS AFTER INJECTING SAS ‘B’
OIL FLOW WILL INCREASE MORE THAN 30%
INJECT SAS ‘B’
SAS TO BE INJECTED INTO PIPE LINE UPSTREAM OF PRIMARY
AND TRANSFER PUMPS TO MIX AND BLEND SAS WITH THE
FLOWING CRUDE OIL
SAS PIPE LINE INJECTION PROCEDURE
SASPUM
P
BALL VALVE
BALL VALVE
THR’D-O-LET
SAS B
SAS B
SAS B
INSTALL SMALL TANK WITH
INJECTION PUMPOIL FLOW WILL INCREASE AND HAVE SLUDGE FREE
PIPE LINE
sludgesludg
e
PIPE LINE
PUMPCRUDE OIL
FLOW
SAS-C is designed for crude oil spill clean-up Soil that is contaminated with crude oil can
be excavated and washed with SAS-C The liquid residue can then be run thru an
oil/water separator
SAS-C
The water can be drained and the clean soil returned to its original location eliminating costly hauling and disposal in a hazardous waste landfill
The equipment can be mounted on a trailer or skid for mobility
SAS-C
SUMMARY
CONCLUSION..
Measure the quantity of the BS&W Determine (visually) the viscosity (thickness)
and liquidity of the sludge The thicker and drier the material the more
SAS will be needed to dissolve the paraffin Cover the BS&W with SAS-A v/v 5%-10%
depending on the thickness and liquidity of the BS&W
Add crude oil on top of the SAS-A v/v 150%-200% of the BS&W. SAS-A must be covered and or contained to prevent evaporation
Instructions for Treating BS&W (Tank Bottom Sludge) Using SAS-A
Let tank or vessel set for 4-12 hours to allow SAS to percolate down into the BS&W and begin to dissolve the paraffin.
After the paraffin is dissolved, begin to agitate all of the contents very briskly. The dissolved paraffin must be completely blended and mixed with the added crude. After the agitation process, allow to settle for several hours. Agitate mixture again until all of the paraffin is completely broken down and dissolved. If necessary, add more SAS and crude oil until desired results are achieved.
Instructions for Treating BS&W (Tank Bottom Sludge) Using SAS-A
Let tank set for several hours (preferably overnight). The sand and water will settle to the bottom and the rest will be good marketable crude
These instructions are valid weather in a large crude storage tank or a jar on a table
Prior to beginning treatment on a large tank, it is advisable to conduct a small test in a jar to obtain the optimum quantities of SAS and added crude oil.
After paraffin is dissolved and the sample is well blended, a 5% solution of water can be added on top of the crude oil. Let settle until all of the water goes to the bottom. This will significantly reduce the sulfur content in the treated crude.
Instructions for Treating BS&W (Tank Bottom Sludge) Using SAS-A
All SAS chemicals are blended in the USA by Tomco-Harwel Industries in Tulsa, Oklahoma They can be purchased in 55 gallon drums, 250-350 gallon totes and containerized in 20’ or 40’ containers. A 20’ container holds (20) 55 gallon drums, a 40’ container holds (60) 55 gallon drums
For more information: Please visit our website: www.tripledint.com for a demonstration
EQUIPMENTS FOR AGITATION
NO.. NEED ANY MORE
TurboMixerThe
By
The TurboMixer Advantage Passive Rotational System (Patent Pending) Automatic Rotation Center and Side Mount Capabilities Permanent or Temporary Installation No Moving Parts Through Shell or Roof Slow Rotation Speed Redundant Seals Built to Last
◦ Stainless Steel Construction◦ All Rotating Parts Slide on Thrust Bearings
Passive Rotational System
• Torque Generated By Offset Nozzles• Internal Viscous Controls Prevent Over Speed• Flow Field Customized by Replaceable Nozzles• Up to 175’ Cleaning Radius
Thrust Bearings Reduce Wear
Redundant Seals
TURBO MIXERS …. LAYOUT
THE REALITY – HOW DO THEY COMPARE
CURRENT SYSTEM PASSIVE ROTATIONAL SYSTEM
200 Feet Tank
TRIPLE D INTERNATIONAL INC. ARE THE
AUTHORIZED DEALER FOR KNIGHTHAWK TURBO MIXER IN ALL MIDDLE EAST AND AFRICA FOR ANY
INFORMATION OR QUERIES VISIT : WWW.KNIGHTHAWK.COM.
END OF PRESENTATIONTriple D International Incorporated
USA
All Rights Reserved
Thank you….