packing for shipment - fujitsu · packing for shipment package fig. 1 packing form for plastic sop,...
TRANSCRIPT
DB81-10008-2E 1
Packing for Shipment
■ Packing formThe packaging used to deliver products consits of tubes, trays, tapes, inner boxes, and an outer
box. (See Figures 1 to 7.)
The tubes, trays, and tapes are designed to protect the products from damage. After unpacking
the products, however, handle them with care not to let ICs become loose or protrude to
prevent them from being damaged.
2 DB81-10008-2E
Packing for Shipment PACKAGE
Fig. 1 Packing Form for Plastic SOP, SOL, SSOP, TSSOP, Tubes
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tube
Dry pack
Inner box
Outer box
FUJITSUIC / LSI
For SOP
Aluminum Iaminated bag
Desiccant
Label I *1
Heat seal
Aluminum Iaminated bag(tubes inside)
Cushioning material
Inner box
Label I *1
box
Cushioning material
Use adhesive tapes.
Humidity indicater
Outer box*2
[Label I]
G Pb
DB81-10008-2E 3
Fig. 2 Packing Form for Plastic SOP, SSOP, TSOP, QFP Trays
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tray
Dry pack
Inner box
Outer box
FUJITSUIC / LSI
Tray
Product
Humidity indicater
Desiccant
Cushioning material
Binding band or tape
Filled tray + one empty tray
Inner box
Binding bandor tape
Label I *1
Inner box
Cushioning material
Aluminum laminated bag
Heat seal
Label I *1
Outer box *2, *3
Use adhesive tapes.
[Label I]
G Pb
4 DB81-10008-2E
Packing for Shipment PACKAGE
Fig. 3 Packing Form for Ceramic QFP, LQFP Trays
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tray
Inner box
Outer box
FUJITSUIC / LSI
Tray
Product
Inner box
Binding bandor tape
Label I *1
Inner box
Cushioning material
Outer box *2, *3
Binding bandor tape
Cushioningmaterial
Filled tray + one empty tray
Use adhesive tapes.
[Label I]
G Pb
DB81-10008-2E 5
Fig. 4 Packing Form for Plastic SOP, TSOP, BCC, QFP, LQFP, TQFP, BGA, T-BGA, FBGA, SCSP, FLGA, JEDEC Size Trays
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tray
Dry pack↓
Inner box
Outer box
Product
Tray
Desiccant
Binding bandor tape
Humidityindicater
Cushioning materialFilled tray + one empty tray
Label I *1
Heat seal
Aluminum laminated bag
FUJITSUIC / LSI
Binding bandor tape
Inner box
Label I *1
Use adhesive tapes.
Inner box
Cushioning material
Outer box *2, *3
[Label I]
G Pb
6 DB81-10008-2E
Packing for Shipment PACKAGE
Fig. 5 Packing Form for Ceramic QFP, LQFP JEDEC Size Tray
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tray
Antistatic bag
↓Inner box
Outer box
Product
Tray
Binding bandor tape
Filled tray + one empty tray
Cushioning material
FUJITSUIC / LSI
Binding bandor tape
Inner box
Label I *1
Inner box
Cushioning material
Outer box *2, *3
Use adhesive tapes.
[Label I]
G Pb
DB81-10008-2E 7
Fig. 6 Packing Form for Ceramic BGA Tray
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Tray
Dry pack↓
Inner box
Inner box
Outer box
Sponge tray
Base TrayProduct
Cover Sponge cusion
Humidity indicater
Desiccant
Cushion material
Binding band or tape
Label I *1
Aluminum laminated bag
Cushion material
Binding band or tape
Outer box *2, *3
Packing tape
Heat seal
Label I*1 [Label I]
G Pb
8 DB81-10008-2E
Packing for Shipment PACKAGE
Fig. 7 Packing form (Embossed tapes)
*1: For a product of witch part number is suffixed with "E1", a " " marks is display to the
moisture barrier bag and the inner boxes.
*2: The size of the outer box may be changed depending on the quantity of inner boxes.
*3: The space in the outer box will be filled with empty inner boxes, or cushions, etc.
Note: The packing specifications may not be applied when the product is delivered via a distributer.
Embossed tapes
Dry pack
Inner box
Outer box
Outside diameter: 330mm reel
FU
J I TS
U
Heat seal
Label I *1
Desiccant
Humidity indicator
Label I *1
Label I *1
Inner box
Aluminum laminated bag
φ 330mm reel φ 254mm reel
FU
J I TS
U
FU
J I TS
U
FU
J I TS
U
FU
J I TS
U
FU
J I TS
U
Label I *1
Taping
Outer box *2, *3
Use adhesive tapes.
Outer box *2, *3
φ Outside diameter: 254mm reelφ
[Label I]
G Pb
DB81-10008-2E 9
■ Index mark orientation of a package on the tray
Package type
Tray size and index mark direction orientation
QFP ingeneral
PGA ingeneral
SOP ingeneral
F
16526
0
Index mark
Chamfered corner
315
F
135.9
Index mark
Chamfered corner
F
165
260
Index mark
Chamfered corner
F
Index mark25
9 or
220
219 or 260
230.3
125.
3
F
Index mark
F
165
260
Index mark direction
Chamfered corner
F
135.9
315
Chamfered corner
❍ = Positive bend index mark direction● = Reverse bend 1st pin index
10 DB81-10008-2E
Packing for Shipment PACKAGE
TSOP I
TSOP II
BGAT-BGAFBGABCCFLGA
Package type
Tray size and index mark direction orientation
F
165
260
❍ = Positive bend 1st pin index● = Reverse bend 1st pin index
Chamfered corner
F
135.9
315
❍ = Positive bend 1st pin index● = Reverse bend 1st pin index
Chamfered corner
F
165
260
❍ = Positive bend 1st pin index● = Reverse bend 1st pin index
Chamfered corner
F
135.9
315
❍ = Positive bend 1st pin index● = Reverse bend 1st pin index
Chamfered corner
F
165
260
Chamfered corner
Index mark direction F
135.9
315
Chamfered corner
Index mark direction
DB81-10008-2E 11
■ Dimensions for Containers
● Dimensions for inner box•TypeA
• Type B
• TypeC
• TypeD
• TypeE
L W
H
L
W
H
L
W
H
L
W
H
L
W
H
12 DB81-10008-2E
Packing for Shipment PACKAGE
(Dimensions in mm)
● Dimensions for outer box
(Dimensions in mm)
Packing TypeInner type
Dimensions for inner box
L W H
Tube A 550 125 75
Tray Dimensions
165 × 260 B 180 275 45
135.9 × 322.6
B 165 360 75135.9 × 314.96
135.9 × 315
135.89 × 314.96
220 × 260 B 236 277 41
219 × 259 C 225 265 15
Emboss Reelφ330 Tape width
12.16
D
365 345 40
24.32 365 345 50
44 365 345 65
φ254 E 265 265 50
L
W
H
Packing TypeDimensions for outer box
L W H
Tube 570 270 175
Tray Dimensions
165 × 260 395 315 150
135.9 × 322.6
385 355 195135.9 × 314.96
135.9 × 315
135.89 × 314.96
220 × 260395 315 150
219 × 259
Emboss Reelφ330 Tape width
12.16
425 410 32524.32
44
φ254 570 270 175
Packing handling precautions
1. Because outer boxes gradually weaken during storage as a result of moisture, stacking, etc.,inventory should be handled on a first-in, first-out basis.
2. Although the IC packing materials (such as tubes) are designed to protect againstelectrostatic damage, full precautions against electrostatic damage must be taken whenremoving the products from their packing.
3. Handle the inner and outer boxes gently. Rough handling can dislodge the tubes stoppers,allowing the products to fall out of the tubes and possibly bend their leads.Rough handling of boxes containing ceramic packages in particular can cause chips, cracks,or leak defects.
4. Because the inner and outer boxes are made of corrugated cardboard, do not allow them tobecome wet. Do not store the boxes outside or in a hot and humid location under anycircumstances.
5. Do not throw, drop or otherwise roughly handle the outer boxes (corrugated cardboardboxes) containing products under any circumstances.
6. QFPs are packed in trays, but it is very easy to accidentally bend their leads when removingthem from their original packing and placing them in other packing. Therefore, strictlyobsever the following items.
a) When cutting the bindingtape, hold the trays securelyin place with one hand.
b) Hold the trays firmly in place while removing the tape so that the trays do not shiftposition. (If the trays shift, the packed ICs may be dislodged and the leads may bend.)
c) Check after packing the packagesBefore stacking the trays containing the IC packages, check the following points.
- Make sure that the packages are properly positioned on the ribs.
- If any packages are not positioned on the ribs, , check for bent leads and thenreposition the packages.
Note: When handling the packages, make sure to take electrostatic countermeasures, such as wearing finger sleeves or a grounded wrist strap. Use air tweezers, and avoid touching the leads if possible.
CutHandUse adhesive tapes
Tray
Ribs(Correct) (If another tray is stacked on top of this one, the leads will be bent)
Is the package on top of the ribs?
Is the package centered properly?
DB81-10005-1E 1
Packing handling precautions PACKAGE
d) Check after stacking the trays
- Make sure that there are no abnormal gaps between the stacked trays.
- Handle the stacked trays carefully when using packing tape or packing bands tosecure the trays. (Secure the trays only after making sure that there are no gaps.)
7. When removing stoppers from containers, be careful not to let the stopper jump out of thecontainer.
8. A container, coated with antistatic, may be sticky.
9. Heat resistant tray has a label entitled "HT" or " heat proof temperature" (e.g. 125 °CMAX). The heat resistant tray allows 125 °C heat being applied for 24 hours. It may causewarp on heating or cooling. To minimize the warp, it is be heated or cooled on a flatsurface. Avoid the abrupt cooling.
Large gap
(Correct) (Incorrect)
2 DB81-10005-1E