paints, primers and specialised coatingspaintlineltd.com/pdf/coo-var.pdf · producing marine and...
TRANSCRIPT
PRODUCT CATALOGUE
Problem Solving Productsfor the 21st Century
Paints, Primers andSpecialised Coatings
COVERING OUR CUSTOMERS’ NEEDS SINCE 1908
REF: B1/10/2012
PAINTS, PRIMERS AND SPECIALISED COATINGS
For further information or to find your nearest Coo-Var stockist2
Welcome to ourproduct catalogueWay back in 1908, Teal & Mackrill Ltd first started manufacturing paint. This was originallyproducing marine and industrial coatings to themanufacturing and shipbuilding industries. The brand, Teamac, still thrives today.
The company then diversified into specialist and functional coatings for the building anddecorative trade under the Coo-Var brand. This is now one of the leading names in specialist paint products, especially in floor paints.
This brochure has been designed to help youdecide which product best suits yourrequirements by providing basic technicalinformation for all Coo-Var products.
If you require further information please call our sales office or Technical Services on +44 (0)1482 328053 or visit www.coo-var.co.uk where data sheets are available for download.
ColourColours shown are an approximate representation only. For exact colour reference please see the Coo-Var colour card or contact us on +44 (0)1482 328053.
CoverageThe practical spreading rate may be lower as it depends on factors such as porosity and roughness of the surface to be painted as well as material losses during during application.
Drying TimeLow temperature and high humidity will adversely affect application, drying time and performance of any coating.
VOC StatementVOCs (Volatile Organic Compounds) contribute to atmospheric pollution. This is stated on the tin label and Technical Data Sheet for every product. If you have any questions regarding Coo-Var products please contact us on +44 (0)1482 328053.
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 3
ContentsThinners 14 ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hammercote Thinners ........ . . . . . . . . . . . . . . . . .Chlorinated RubberThinners 15 ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Thinners 16 ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Thinners 18 ........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Anti-graffiti Brushwash ......... . . . . . . . . . . . . . . . . .Oil Remover ........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor Sealer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acrylic Floor Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Floor Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .High Performance Primer ......... . . . . . . . . .Profloor ...........................................................................Profloor Anti-slip Aggregate ............Profloor Plus .............................................................Profloor Plus Anti-slip A’gate ... . . . . . . .
44
44444
66667777
UniversalDegreaser/Cleaner ........ . . . . . . . . . . . . . . . . . . . . . . .Acid Etch ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil Tolerant Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dampshield ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Floorpack ConcreteRepair Mortar ........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CSP Cold Mortar ......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4455
55
Profloor Plus Fast Hardening .... . . . . . .Profloor Plus Cold Cure ....... . . . . . . . . . . . . . . .Guard-Coat Anti-microbial .......... . . .Suregrip Anti-slip ...............................................Polyurethane Floor Coating ............Polyurethane Varnish - Two Pack ................................................... . . . . . . . . . . . . . . . . . . . . . . . . .Clear Glaze for
88889
9
Wooden Floors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Low Odour Line Marking . . . . . . . . . . .Acryl ic Line Marking Paint . . . . . . .Roadline Aerosol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Squash Court Paint . . . . . . . . . . . . . . . . . . . . . . . . . .Tennis Court and Drive Paint . .Teamac ChlorvarChlorinated RubberSwimming Pool Paint . . . . . . . . . . . . . . . . . . . . . .
91010101111
11Vandalene Anti-climb Paint . . . . . . . . .GP101 Graffiti Protection System Sealer Coat for GP101 . . . . . . . . . . . . . . . . . . . . . . . .Anti-graffiti Coating - Two Pack Water Based Anti-graffitiCoating - Two Pack ....................................Clear Glaze Anti-graffiti Kit ...............Graffiti Remover Liquid Aerosol ..
12121213
131313
Graffiti Remover Wipes .................... . . . . .Anti-graffiti Brushwash ........... . . . . . . . . . . . . . .Glocote Fluorescent Paint .............. . .Glocote Foundation ..................................Glocote Protective ........................................Luminous Paint ............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foundation Base for Luminous ... Clear Protective for Luminous ......
1313141414151515
Suregrip Anti-slip ........... . . . . . . . . . . . . . . . . . . . . . . . . . . .Anti-slip Tapes & Treads .............. . . . . . . .Wet Paint Warning Tape ........................Stencils ...........................................................................
16161616
Hammercote Smooth . . . . . . . . . . . . . . . . . . . . . . . .Hammercote Hammered ........ . . . . . . . .Hammercote Aerosol Smooth . . . .Hammercote AerosolHammered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hammercote Satin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hammercote Thinners ......... . . . . . . . . . . . . . . .Rust Converter .............. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
171717
17181818
All Metals Primer .................. . . . . . . . . . . . . . . . . . . . . . .Zinc Phosphate Primer . . . . . . . . . . . . . . . . . . . . .Red Oxide Metal Primer . . . . . . . . . . . . . . . . .
181919
Anti-Corrosive Red Oxide .. . . . . . . . . . . .Glass Shading ............................... . . . . . . . . . . . . . . .Brick and Tile Paint ......... . . . . . . . . . . . . . . . . . . . . . .Brick and Tile Paint W/Based ....... Solar Reflecting PaintAluminium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Solar Reflecting Paint: White ........ . .Matt Black ............................. . . . . . . . . . . . . . . . . . . . . . . . . . . .
20202020
212121
Matt Black Water Based . . . . . . . . . . . . . . . .Ebony Black ........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Heat Resistant Black Enamel . . . . .Gold Paint ............ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Finest Pale Goldsize ... . . . . . . . . . . . . . . . . . . . . . . . .Terebine Liquid Driers .... . . . . . . . . . . . . . . . . . . . . .Eggshell White Finish .................................Radiator Paint ....................................................
2122222222222323
Gloss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Undercoat (for Gloss) ........ . . . . . . . . . . . . . . . . .
2323
Yacht and Seaplane Varnish . . . . .Acrylic Varnish ........ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Polyurethane Varnish . . . . . . . . . . . . . . . . . . . . . . .Polyurethane Varnish - Two Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Siliconised Teak Oil ... . . . . . . . . . . . . . . . . . . . . . . . . . . .Danish Oil ...................................... . . . . . . . . . . . . . . . . . . . . .
242424
242525
Penetrating Wood Primer . . . . . . . . . . . . . .Aluminium Wood Primer ........ . . . . . . . . . .MDF Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Patent Knotting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Rust Converter ................... . . . . . . . . . . . . . . . . . . . . . . . .All Metals Primer .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Zinc Phosphate Primer .........................Red Oxide Metal Primer .....................
2626262627272727
Acrylic Primer SealerUndercoat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .All Purpose Primer ........ . . . . . . . . . . . . . . . . . . . . . . .Stain Block All Purpose Primer . .T i le and Melamine Primer . . . . . .Maonry Stabiliser ........... . . . . . . . . . . . . . . . . . . . . . . . .Alkali Resisting Primer ... . . . . . . . . . . . . . . . . . . . . .
282828282929
Cleaning,Preparationand Repair
Floor, Sport andLine Marking
Safetyand Security
Hammercoteand Productsfor Metal
SpecialistPaints
Varnishesand Oils
SpecialistPrimers
Guidance Notes andSpecification Information
Accessories andPromotional Aids
Coo-Var Technical ServicesShould you have anyquestions or queries about any Coo-Var product, or require preparation advice, please call 01482 328053 . Full specification service also available.
32-35 30-32
ICON KEYPaintBrush
Airless Spray
Roller
Trowel
Line Marking Applicator
Aerosol
Stiff YardBrush
Mitt
Non Drying
HandScatter
HardDry
TouchDry
OvernightOvercoat Times
PAINTS, PRIMERS AND SPECIALISED COATINGS
Cleaning,Preparationand Repair
For further information or to find your nearest Coo-Var stockist4
Thinners 14
Hammercote Thinners
Anti-graffiti Brushwash
Oil Remover
Chlorvar Thinners 15
Thinners 16
Thinners 18
Acid Etch
Universal Degreaser/Cleaner
CLEANINGTHINNERS/BRUSHWASH
THINNERS/BRUSHWASH
THINNERS/BRUSHWASH
THINNERS/BRUSHWASH
THINNERS/BRUSHWASH
CLEANING
CLEANING
PREPARATION
V607/14 Q607/7
V607/15
V607/15
V607/16
V607/18
Q227/1
V607/15
W101/1
A general thinners for varnishes, primers and a number ofspecialised finishes.
A brushwash for P101Anti-graffiti Coating. To clean equipment.
SPECIAL NOTES:Only effective for cleaning brushes immediately after use.
A water based, environmentally friendly cleaner with powerful cleaning and degreasingproperties. Use to degrease and remove oil from the surface prior to acid etching or painting. Part of the cleaning process.
For use with Hammercote.
A careful blend of solvents to give powerful cleaning and degreasing properties. Use to degrease and remove oil etc from the surface prior to acid etching or painting. Part of the cleaning process for a good finish.
For use with ChlorvarChlorinated Rubber Paint.
A careful blend of acids and wetting agents in solution. Used to clean and ‘etch’concrete/mortared floors and pools prior to painting. Removes laitence and salts from concrete and render. Must be used onexceptionally smooth surfaces such as power floated concrete floors to create ‘key’. Dilute 3 parts water/1 part Acid Etch.
SPECIAL NOTES:Essential for good adhesion of paint.
Ideal for use with Chlorvar if sprayed. Also use for Teamac Rapidry, Metaclor and Rapidry Anti-corrosive Finish.
For Low Odour Line Marking Paint.
TIN SIZES:
1L, 2.5LCOLOURS:
TIN SIZES:
250ml, 500ml,1L, 2.5L
COLOURS:
TIN SIZES:
2.5LCOLOURS:
TIN SIZES:
1L, 2.5LCOLOURS:
TIN SIZES:
2.5LCOLOURS:
TIN SIZES:
500ml, 5LCOLOURS:
TIN SIZES:
5LCOLOURS:
TIN SIZES:
2.5LCOLOURS:
TIN SIZES:
5LCOLOURS:
APPLICATION:
ESTIMATEDCOVERAGE:
BRUSHWASH/THINNERS: WATER
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Clear thin liquid
Stiff yard brush. Dilute with water: 3 parts water to 1 part Acid Etch
7m²/ l
(once diluted) depending on porosity and dilution.
PAINTS, PRIMERS AND SPECIALISED COATINGS
Cleaning,Preparationand Repair
call us on +44 (0)1482 328053 5
Oil Tolerant Primer
Floorpack Concrete RepairMortar
Dampshield
CSP Cold Mortar
Q228/1
Q265/1
Q124/Damp
M200
Ideal for surfaces with residual oil contamination. Two pack.
PREPARATION
REPAIR
PREPARATION
REPAIR
A damp-proof membrane that enables earlier covering of new concrete. Also has excellent adhesion properties.
• Works particularly well as a system underneath Coo-Var Profloor Plus.
TIN SIZES:
5kg mixed unit
COLOURS:
TIN SIZES:
4kg mixed unit
COLOURS:
TIN SIZES:
5.5kg,, 12.5kgCOLOURS:
TIN SIZES:
5kgCOLOURS:
SPECIAL NOTES:Surface must be of sufficient quality and mechanical strength to ensure an even coating.On ‘difficult’ surfaces, testDampshield and topcoat on small area.
A repair mortar specifically designed for use in cold rooms to repair cracks and holes. Ideal for use when cold rooms cannot be turned off.
• Cures at temperatures as low as -35°C
A solvent free, heavy duty two pack mortar kit. Ideal for repairs to areas and floors subject to high impact, abrasive orchemically corrosive conditions. Can repair large voids inconcrete beams, floors or precast units.
• Can be used in damperconditions and lowertemperatures than some systems
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:220 micronsRecommended Wet Film Thickness Per Coat:220 microns
SUITABLE SURFACES:CONCRETE FLOORS, SCREEDS
DRYINGTIME:
OVERCOATTIME:
Pot Life: 50 minutes @ 20°C
SPECIAL NOTES:Surface must be of sufficient quality and mechanical strength to ensure an even coating.
BRUSHWASH/THINNERS: THINNERS 16
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:230 micronsRecommended Wet Film Thickness Per Coat:230 microns
BRUSHWASH: THINNERS 16 (Do not thin)
SUITABLE SURFACES:CONCRETE FLOORS, SCREEDS, VINYL TILES & OTHER DIFFICULT SURFACES
DRYINGTIME:
OVERCOATTIME:
Pot Life: 30 minutes @ 20°C
FINISH:
APPLICATION:
ROUGH IF A LARGEQUANTITY USED
ESTIMATEDCOVERAGE:
Recommended Dried Film Thickness Per Coat:5mm depending on application
DRYINGTIME:
Mortar Pot Life: 10-15 minutes stored at ambient temperature (once mixed)Full Cure at -20°C: 5 hrsFull Cure at -30°C: 12 hrs
SPECIAL NOTES:Ensure the products are at cold store temperature before mixing.Primer is included in the 5.5kg kit.
TROWEL WASH/SMOOTHING: CLEAN PARAFFIN
DRYINGTIME:
Mortar Pot Life: 1 hrInitial Cure: 3-12 hrsFull Cure: 3-10 days
SPECIAL NOTES:Wash the surface with Thinners 16 to help penetration and adhesion.
TROWEL WASH/SMOOTHING:THINNERS 16
@5mmper kit
Recommended Dried Film Thickness Per Coat:4.5mm depending on application
SUITABLE SURFACES:BRICK, MASONRY, CONCRETE
SUITABLE SURFACES:BRICK, MASONRY, CONCRETE
Clear Clear
20m²/ l
24hrs
Min Max
24hrs 48hrs
24hrs
Min Max
12hrs 48hrs
Natural
20m² PER MIXED UNIT
0.5m² @5mm
1.25m² @5mm
5.5kg 12.5kg
FINISH:
APPLICATION:SMOOTH
ESTIMATEDCOVERAGE:
DarkGrey
0.5m²/ l
To be applied in layers with a trowel
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
For further information or to find your nearest Coo-Var stockist6
Floor SealerG136/T
Prevents dusting. Ideal where a low cost sealer is required. For interior and exterior use.SUITABLE SURFACES:WOOD, METAL, CONCRETE
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: THINNERS 14
SINGLE PACK
TIN SIZES:
5LCOLOURS:
FINISH:
APPLICATION:SEMI-GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:50-60 micronsRecommended Wet Film Thickness Per Coat:100 microns
Acrylic Floor PaintW138
A water thinned floor paint. Easy to apply and fast drying with low odour. For foot and light truck traffic. Ideal for use on bricks, window ledges, walls etc.
• Low odour and Fast drying• For interior and exterior use
SINGLE PACK
SUITABLE SURFACES:WOOD, METAL, CONCRETE, ASPHALT, TARMAC
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: WATER
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:SEMI-GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:90 micronsSPECIAL NOTES:
On unpainted surfaces use Coo-Var Acrylic Floor Paint thinned 5% with water. Apply direct to wood. Prime metal with Coo-Var All MetalsPrimer. Do not apply below 7°C.
Floor PaintG136
A single pack floor coatingdesigned to be easy to use,versatile and economical.Protects and decorates floors,inside or outside. Ideal for use on walls, bricks, window ledges and is compatible with most previous coatings.
• For interior and exterior useSUITABLE SURFACES:WOOD, METAL, CONCRETE, GRP
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: THINNERS 14
SINGLE PACK
SPECIAL NOTES:On unpainted concrete prime with Coo-Var Floor Paint thinned 10% withThinners 14. Prime soft wood with Coo-Var Penetrating Wood Primer, hard wood with Coo-Var Aluminium Wood Primer and metal with Coo-Var Zinc Phosphate Primer.Not recommended for use on asphalt, bituminous surfaces or onthermoplastic tiles.
TIN SIZES:
250ml in Tile Red500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:SEMI-GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:50-60 micronsRecommended Wet Film Thickness Per Coat:100 microns
High Performance PrimerW221/1
A water based two pack epoxy primer. To assist adhesion to difficult floors, tiles etc. Acts as a barrier between old floorings and selected Coo-Var products (e.g Bitumen, smoke stained surfaces). Low odour.
• Particularly recommended with Profloor
SUITABLE SURFACES:WOOD, CONCRETE
DRYINGTIME:
OVERCOATTIME:
Pot Life: 90-120 minutes @ 20°C
TWO PACK HEAVY DUTY
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:SEMI-GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:45-65 micronsRecommended Wet Film Thickness Per Coat:100 microns
BRUSHWASH/THINNERS: WATER
SPECIAL NOTES:Ideal for use where organic solvents are banned. Wall and floor coating. Prepares difficult floors or tiles. Dilute with 10% water for application.Do not apply at temperatures below 10°C
4hrs
Min
16hrs
Clear Tile Red
WhiteBlack Forest Green
Flint Grey
Black Bright Red
Dark Grey
Flint Grey
Forest Green
Light Grey
Safety Yellow
Steel Blue
Stone Tan Tile Red
White
Clear
12hrs
10-12m²/ l
1.5hrs 6hrs
6hrs
11m²/ l
4hrs
16hrs
12hrs
or
or9-11m²/ l
Min
16hrs
Max
7days
Shortpileroller
7-10m²/kg
1.5hrs 6hrs
Full Cure:5-7 days
SC
SC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
call us on +44 (0)1482 328053 7
ProfloorW222
A water based, solvent free two pack floor coating. For use in heavy traffic areas such as foot, forklift and vans. Suitable for interior and exterior use. Can be used on existing stable paints. Ideal for use on walls as well as floors. Anti-slip additive available.
• Low odour and fast drying• Highly hard wearing
TWO PACK HEAVY DUTY
SUITABLE SURFACES:WOOD, CONCRETE, MASONRY, ASPHALT, TARMAC
DRYINGTIME:
OVERCOATTIME:
Pot Life: 2-4 hours @ 20°C
BRUSHWASH/THINNERS: WATER
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:
OFF GLOSSANTI-SLIP IS AGGREGATED
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-70 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Apply direct to ordinary stable concrete.High Performance Primer to be used where surface is smooth, polished or porous.Do not apply at temperature below 10°C.
Profloor PlusQ225
Profloor Plus is a heavy duty, low viscosity and solvent free floor paint with outstanding resistance to abrasion. Ideal for use infactories, workshops/garages, stadiums and other high wear public places. Anti-slip additiveavailable.
• Low odour• Exceptionally hard wearing• Takes heavy traffic after 36 hours
TWO PACK HEAVY DUTY
SUITABLE SURFACES:WOOD, CONCRETE, MASONRY, ASPHALT
DRYINGTIME:
OVERCOATTIME:
Pot Life: 20-30 minutes @ 20°C
BRUSHWASH: THINNERS 16 (do not thin)
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:HARD FILM GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:180-200 micronsRecommended Wet Film Thickness Per Coat:180-200 microns
SPECIAL NOTES:Apply direct to ordinary stable concrete.High Performance Primer to be used where surface is smooth, polished or porous.Disposable application equipment is recommended.
Profloor Anti-slip AggregateM112/1
An anti-slip aggregatecomponent to be used to create an anti-slip finish to Profloor.
TWO PACK HEAVY DUTY
TIN SIZES:
220gAPPLICATION:
SPECIAL NOTES:Do not mix into paint - see TDS for instructions.
ESTIMATEDCOVERAGE:
Profloor Plus Anti-slip AggregateM112/3
A large particle size anti-slip aggregate component to be used to create an anti-slip finish to Profloor Plus.
TWO PACK HEAVY DUTY
TIN SIZES:
440gAPPLICATION:
SPECIAL NOTES:Do not mix into paint - see TDS for instructions.
ESTIMATEDCOVERAGE:
Grey L GreyOOA05
Black Clear Green
4hrs 8-12hrs
6-10m²/kg
Tile Red
ForestGreen
Poppy Red
Black Blue Flint Grey
6hrs
17-19m²/5kg
SafetyYellow
Max
48hrs
Min
SterlingGrey
Tile Red
White
Full Cure:5-7 days
To be scattered evenly
To be scattered evenly
20m²/unit 20
m²/unit
ShortpilerollerShortpile
roller
Min
16hrs
Max
72hrs
4-8hrs 24-36hrs
Full Cure:5-7 days
WhiteYellow
= RAL & BS special colours available to order
SC SC
SC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
For further information or to find your nearest Coo-Var stockist8
Profloor Plus Fast HardeningQ220/Z
A fast curing, heavy duty, solvent free floor paint with outstanding resistance to abrasion. Allows for laying and recoating within the same working day.Particularly useful where factory/warehouse shutdown time is to be minimised. Anti-slip additive available.
• Apply two coats in one day• Exceptionally hard wearing
TWO PACK HEAVY DUTY
SUITABLE SURFACES:WOOD, CONCRETE, MASONRY, ASPHALT
DRYINGTIME:
OVERCOATTIME:
Pot Life: 15 minutes @ 20°C
BRUSHWASH: THINNERS 16 (do not thin)
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:HARD FILM GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:180-200 micronsRecommended Wet Film Thickness Per Coat:180-200 microns
SPECIAL NOTES:Apply direct to ordinary stable concrete. High Performance Primer to be used where surface is smooth, polished or porous.Disposable application equipment is recommended.
Profloor Plus Cold CureQ221/Z
A low temperature curing, heavy duty, solvent free floor paint withoutstanding resistance toabrasion. Designed to cure whenthe surface temperature is in therange of 0-10°C. Allows the painting of floors in colder weath-er. Anti-slip additive available.
• Apply in colder tempertures• Exceptionally hard wearing
TWO PACK HEAVY DUTY
SUITABLE SURFACES:WOOD, CONCRETE, MASONRY, ASPHALT
DRYINGTIME:
OVERCOATTIME:
Pot Life: 15 minutes @ 20°C
BRUSHWASH: THINNERS 16 (do not thin)
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:HARD FILM GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:180-200 micronsRecommended Wet Film Thickness Per Coat:180-200 microns
SPECIAL NOTES:Apply direct to ordinary stable concrete. High Performance Primer to be used where surface is smooth, polished or porous.Disposable application equipment is recommended.
Guard-CoatW224
Guards against the spread of bacteria including MRSA and E.coli. Silver ion technology creates anti-bacterial properties that last for the life of the paint. Ideal for use in hospitals, clinics, commercial kitchens etc. Reduce scuffs on walls from chairs/beds.
• Anti-baterial properties• Very hard wearing
TWO PACK HEAVY DUTY
SUITABLE SURFACES:WOOD, CONCRETE, MASONRY, ASPHALT
DRYINGTIME:
OVERCOATTIME:
Pot Life: 2-4 hours @ 20°C
BRUSHWASH/THINNERS: WATER
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:
OFF GLOSSANTI-SLIP IS AGGREGATED
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-70 micronsRecommended Wet Film Thickness Per Coat:100 microns
Suregrip® Anti-slip Floor PaintG139
A ready mixed, single pack aggregated floor paint. Provides a rough, anti-slip finish which helps to prevent slips and falls. For foot and light truck traffic, inside or outside. Ideal around machinery, car pits, on ramps and door steps.
• For interior and exterior use
SAFETY PRODUCT
SUITABLE SURFACES:WOOD, CONCRETE, METAL, GRP
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH: THINNERS 14 (do not thin)
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:AGGREGATED
ESTIMATEDCOVERAGE:Ensure the product is applied at between 6-10 square metres per litre in order to achieve the correct film thickness
SPECIAL NOTES:On unpainted concrete use Coo-Var Floor Paint (page 6) thinned 10% with Thinners 14. Soft wood: Penetrating Wood Primer. Hard wood: Aluminium Wood Primer. Metal: Zinc Phosphate Primer.
ForestGreen
Poppy Red
Black Blue Flint Grey
SafetyYellow
SterlingGrey
Tile Red
White
ForestGreen
Poppy Red
Black Blue Flint Grey
SafetyYellow
SterlingGrey
Tile Red
White
4-5m²/kg
4-5m²/kg
18hrs
4hrs 36hrs
4hrs
4hrs 10hrs
Shortpileroller
Shortpileroller
6-10m²/kg
4hrs 8-12hrs
Full Cure:5-7 days
Grey Light Grey
Black Blue Green Tile Red
White Yellow
5hrs
16hrs
24hrs
or
6-10m²/ l
@0°C
Shortpileroller
Min
16hrs
Max
7days
Grey L GreyOOA05
Black Clear Green Tile Red
WhiteYellow
SCSC
SC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
call us on +44 (0)1482 328053 9
Polyurethane Floor CoatingV606
A single pack urethane alkyd. Designed for use on domestic interior wooden floors. Gives an economic, decorative and durable finish.
CLEAR COATING FOR WOOD
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: THINNERS 14
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:GLOSS, EGGSHELL,
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:70 microns
SPECIAL NOTES:Thin first coat up to 10% with Thinners 14.
Polyurethane Varnish - Two PackP101/POLY
A stable, two pack polyurethane floor coating which will not fade or yellow if exposed to Ultra Violet Light. Does not support fungus growth and is easy to clean. Ideal for use in high useage areas such as dance studios, gyms etc.
• Hard wearing• Will not fade in sunlightSUITABLE SURFACES:WOOD, PLASTER, CONCRETE, MASONRY
DRYINGTIME:
OVERCOATTIME:
Pot Life: 6-8 hours @ 20°C
BRUSHWASH: THINNERS 14 (do not thin)
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:73-85 micronsRecommended Wet Film Thickness Per Coat:142-167 microns
SPECIAL NOTES:Requires professional application.
CLEAR COATING FOR WOOD
Clear Glaze for Wooden FloorsW138/T
Use on wooden floors to provide a quick drying protective clear coat. Ideal for use inside where fast drying and no solvent smell is important.
CLEAR COATING FOR WOOD
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: WATER
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:OFF GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:90 microns
SPECIAL NOTES:Not suitable for use when temperature is below 7°C.
2hrs
12hrs
12hrs
or
Clear Clear
3-4hrs
16hrs
16-24hrs
35-40m²/5kg unit
14m²/ l
Clear
1.5hrs
6hrs
6hrs
Opaque but dries clear
11m²/ l
= RAL & BS special colours available to orderSC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
For further information or to find your nearest Coo-Var stockist10
Low Odour Line Marking PaintG119
A spirit based paint which can be applied directly to tarmac. Ideal for use in factories etc. where fast drying is a high priority.
• Fast drying• Ideal to colour code areas
LINE MARKING
TIN SIZES:
2.5L, 5LCOLOURS:
Acrylic Line Marking PaintW463
An acrylic resin based linemarking paint which is ideal where the release of organic solvents is restricted/unwanted. Suitable for concrete sports courts.
• For interior and exterior use
LINE MARKING
TIN SIZES:
2.5L, 5LCOLOURS:
SUITABLE SURFACES:SEALED CONCRETE, TARMAC, WOOD
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: THINNERS 18
SPECIAL NOTES:Seal porous surfaces first.New Tarmac requires several months to weather before coating.
SUITABLE SURFACES:CONCRETE, TARMAC, WOOD
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: WATER
SPECIAL NOTES:Apply a coat which has been thinned 10% with water on porous concrete, otherwise apply direct to surface.Do not apply when temperature is below 7°C.
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:100 microns
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:100 microns
Roadline AerosolQ108
A simple to use, convenient marking system. Ideal for line marking in car parks, tennis courts, factories, building sites etc.
• Quick and easy to apply• For interior and exterior use• Can be used with stencils
SUITABLE SURFACES:WOOD, CONCRETE, METAL, TARMAC, BITUMIN
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
750ml Aerosol
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:
SPECIAL NOTES:If applying over an existing coating, test a small area first for compatibility.Store aerosols on their side to prevent blockages.
LINE MARKING
Wheel applicators available
30mins
1hr
1hr
6hrs
1hr 4hrs
YellowBlack Red5L only
White
10m²/ l
Red WhiteBlack Blue Green Yellow
60-100m/can
Based on astraight 50mmwide line
15mins
2hrs
2hrs
YellowBlack Red5L only
White
10m²/ l
SC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Floor, Sport andLine Marking
call us on +44 (0)1482 328053 11
Squash Court PaintQ142/1
A white coating for squash court surrounds and all non playing surfaces. It is possible to paint the playing surface but according to the Squash Rackets Associ-ation this disqualifies it from official tournaments.
• Provides a high impact resistant finish
COURTS AND SPORTS
SUITABLE SURFACES:MASONRY, PLASTER, PAINT
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: THINNERS 14
TIN SIZES:
5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-35 micronsRecommended Wet Film Thickness Per Coat:40-80 microns
Tennis Court and Drive PaintW449
A water based coating designed to provide colour on asphalt and tar based tennis courts. Alsoideal for tarmac drives and paths.
• Suitable for exterior use
COURTS AND SPORTS
SUITABLE SURFACES:STABLE ASPHALT, CONCRETE, TARMAC
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:100-110 microns
SPECIAL NOTES:Apply a coat thinned 10% with water on porous surfaces. Otherwise apply direct.Not suitable for use when temperature is below 7°C.
BRUSHWASH/THINNERS: WATER
Teamac Chlorvar Chlorinated Rubber Swimming Pool PaintG149
One of the best ways to ensure chemical and water resistance. Offers outstanding protection against a range of chemicals and aqueous solutions. Can be used in a swimming pool below and above the waterline. Suitable for salt water pools.
• Ideal for swimming pools,paddling pools, fountain pools, ponds etc.
COURTS AND SPORTS
SUITABLE SURFACES:METAL, WOOD, CONCRETE, BRICK, PLASTER
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS:CHLORVAR THINNERS 15
TIN SIZES:
5LCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:20-25 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:Not suitable for use when temperature is below 7°C.
White
14m²/ l
6-8hrs
12hrs
16-24hrs
or
Depending on porosityof the surface
Black Green Red
5-9m²/ l
Depending on porosityof the surface
1hr 4hrs
6hrs
Black Blue White
14m²/ l
2hrs 24hrs
16hrs
SC
= RAL & BS special colours available to orderSC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Safetyand Security
For further information or to find your nearest Coo-Var stockist12
Vandalene Anti-climb PaintC264
A think, non drying (single pack) product of a sticky nature. Helps protect property from indruders by providing a slippery surface they cannot get a good grip on. Ideal for use on window ledges, down pipes, walls, gutters, garage roofs or anywhere which may be used as a grip point. Also contains a hidden identifier.
• Remains tacky• Deterrent poster available
SECURITY PRODUCT
TIN SIZES:
0.8kg, 2kg, 4kg,500ml aerosol (black)
COLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
SPECIAL NOTES:Seal porous surfaces first.New Tarmac requires several months to weather before coating.
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Film Thickness Per Coat:0.5mm
BRUSHWASH: THINNERS 14 (do not thin)
Graffiti Protection SystemGP101
This single pack system offers long-term protection against both graffiti and flyposting (glue/tapes will not stick). No solvents are required to wash off graffiti (use water only) saving time and money. Check small area first if applying to plastic, metal or paint.
• Fast drying - apply two coats in one day• Wash off graffiti using only water!
SECURITY PRODUCT
TIN SIZES:
2.5L, 5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:DO NOT use solvents to clean graffiti from GP101.On porous surfaces use Sealer Coat for GP101.
FINISH:
APPLICATION:GLOSS, MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:55 micronsRecommended Wet Film Thickness Per Coat:100 microns
BRUSHWASH: THINNERS 14 (do not thin)
Sealer Coat for GP101Q462
Likely to be needed beforeapplying GP101 GraffitiProtection System onto porous surfaces. A transparent sealer that also offers excellent water andmildew resistance. Being acrylic based this is low odour, nonflammable and low toxicity.
• Can be used to minimise darkening of sandstone and other natural stone
SECURITY PRODUCT
TIN SIZES:
2.5LCOLOURS:
SUITABLE SURFACES:POROUS SURFACES
DRYINGTIME:
OVERCOATTIME:
FINISH:
APPLICATION:OFF GLOSS,
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:22 micronsRecommended Wet Film Thickness Per Coat:65 microns
BRUSHWASH/THINNERS: WATER
SPECIAL NOTES:Designed to be used under GP101 Graffiti Protection System.See guidance notes for application details.
Tile Red
Black Green Grey
Clear
2m²/kg
8-10m²/ l
1-2hrs
4-6hrs
2.5hrs 2hrs 24hrs
1.5hrs 6hrs
overcoating itself
overcoating with GP101
Clear
10-15m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 13
Safetyand Security
Anti-graffiti Coating - Two packP101
A two pack polyurethane coating which provides a highly graffiti resistant finish inside or outside. Can be used over compatible water based paints to provide a glaze over colour (not for use over conventional solvent based paints). Ideal for bridges, underpasses, statues, walls, toilets and more.
• Very hard wearing - can be cleaned many times without affecting the coating
SECURITY PRODUCT
TIN SIZES:
5kg Mixed Unit
COLOURS:
SUITABLE SURFACES:WOOD, BRICK, MASONRY, PLASTER
DRYINGTIME:
OVERCOATTIME:
Pot Life: 6-8 hours @ 20°C
SPECIAL NOTES:Can be applied to unpainted surfaces and water based paints.
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:65-70 micronsRecommended Wet Film Thickness Per Coat:120-135 microns
BRUSHWASH/THINNERS:ANTI-GRAFFITI BRUSHWASH
Water Based Anti-graffiti Coating - Two packWB101
A water based anti-graffiticoating for interior and exterior use. Low odour and fast drying. Can be used over compatible coloured paints.
• Dries to a hard, easy clean finish
SECURITY PRODUCT
TIN SIZES:
5kg Mixed Unit
COLOURS:
SUITABLE SURFACES:WOOD, BRICK, MASONRY, PLASTER
DRYINGTIME:
OVERCOATTIME:
Pot Life: 2-3 hours @ 20°C
SPECIAL NOTES:Ideal where low odour is important.Do not spray.
FINISH:
APPLICATION:OFF GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:100-105 micronsRecommended Wet Film Thickness Per Coat:185 microns max
BRUSHWASH/THINNERS: WATER
Clear Glaze Anti-graffiti KitWB101/T
A water based two packanti-graffiti system in kit form. Contains all you need to mix and apply the coating:WB101 2.5kg, brush, mixerpaddle, gloves and instructions.
• Dries to a hard, easy clean finish
SECURITY PRODUCT
TIN SIZES:
5kg Mixed Unit
COLOURS:
SUITABLE SURFACES:WOOD, BRICK, MASONRY, PLASTER
DRYINGTIME:
OVERCOATTIME:
Pot Life: 2-3 hours @ 20°C
SPECIAL NOTES:Ideal where low odour is important.Do not spray.
FINISH:
APPLICATION:OFF GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:100-105 micronsRecommended Wet Film Thickness Per Coat:185 microns max
BRUSHWASH/THINNERS: WATER
Graffiti Remover - Liquid AerosolQ607/1
Use to remove graffiti fromCoo-Var P101 or WB101 systems (not for use on GP101). Easy to use and tough on graffiti.
SECURITY PRODUCT
TIN SIZES:
400mlAPPLICATION:
Graffiti Remover WipesQ607/38
Easy to use wipes to removegraffiti from previously coated surfaces. Not for use withCoo-Var GP101.
SECURITY PRODUCT
TUB SIZES:
100 wipes arrox.
Anti-graffiti BrushwashQ607/7
A brushwash and thinning agent for P101 Anti-graffiti Coating. Use to thin the first coat asrequired and to clean applicationequipment.
SECURITY PRODUCT
TIN SIZES:
500ml, 5LCOLOURS:
Clear
Clear
Clear thin liquid
7-8m²/kg
25-40m²/5kg
12-18m²/kit
3-4hrs 16-24hrs
1-2hrs 24hrs
18hrs
4hrs 36hrs
Clear
Min
16hrs
Max
72hrs
Min
16hrs
Max
72hrs
SC
PAINTS, PRIMERS AND SPECIALISED COATINGS
Safetyand Security
For further information or to find your nearest Coo-Var stockist14
Glocote Fluorescent PaintD125
A high visibility coating which is effective in daylight or under lights at night. Ideal for use on bicycles, skips, bollards, fishing floats, bridges, signs, ships etc. Also used for theatrical effects.
• High visibility under light
SAFETY PRODUCT
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:Works best as part of a system with Glocote Foundation and Glocote Protective.
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:75 microns
BRUSHWASH/THINNERS: THINNERS 14
Glocote Foundationfor Fluorescent PaintF158
A high density white base coat for use underneath GlocoteFluorescent Paint. Provides a white base which is essential for the Glocote system to function.
• The ideal base for Glocote
SAFETY PRODUCT
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:Apply onto a suitably prepared surface.Part of the Glocote Paint system.
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
BRUSHWASH/THINNERS: THINNERS 14
Glocote Protectivefor Fluorescent PaintV601
Provides a clear glaze to protect the colour and finish of Glocote Fluorescent Paint. Also protects from the weather.
• Especially useful outdoors
SAFETY PRODUCT
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:For use over Glocote Fluorescent Paint in high use areas or outdoors.
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:70 microns
BRUSHWASH/THINNERS: THINNERS 14
Red YellowGreen Orange Pink
13m²/ l
12hrs
2hrs 12hrs
12hrs
6hrs 24hrs
12hrs
3hrs 12hrs
or
White
13m²/ l
or
or
Clear
14m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 15
Safetyand Security
Luminous PaintW463/280
This coating glows in the dark for a limited time after exposure to light. Used to identify exits, doors, escape routes etc when lights fail at night. Also suitable for theatrical effects.
• Good for emergency exits• Water based and low odour
SAFETY PRODUCT
TIN SIZES:
500ml, 2.5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:Works best as part of a system with Luminous Foundation and Luminous Protective.Not suitable for use when temperature is below 7°C.
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:75 microns
BRUSHWASH/THINNERS: WATER
Foundation Basefor Luminous PaintW463
For use as a white base coat for under Luminous Paint. Water based and low odour.
• The ideal base for Luminous PaintSUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:Apply onto a suitably prepared surface.Part of the Luminous Paint system.Not suitable for use when temperature is below 7°C.
BRUSHWASH/THINNERS: WATER
Clear Protectivefor Luminous PaintW462
Provides a clear glaze to protect the finish and effectiveness ofLuminous Paint. Also protects from the weather.
• Especially useful outdoors
SAFETY PRODUCT
TIN SIZES:
500ml, 2.5LCOLOURS:
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:For use over Coo-Var Luminous Paint.Not suitable for use when temperature is below 7°C.
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:70 microns
BRUSHWASH/THINNERS: WATER
SAFETY PRODUCT
TIN SIZES:
500ml, 2.5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
Translucent Pale Green
13m²/ l
6hrs
30mins 2hrs
6hrs
45mins 4hrs
6hrs
30mins 2hrs
White
13m²/ l
Clear
14m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
For further information or to find your nearest Coo-Var stockist16
Safetyand Security
Suregrip® Anti-slip Floor PaintG139
A ready mixed, single pack aggregated floor paint. Provides a rough, anti-slip finish which helps to prevent slips and falls. For foot and light truck traffic, inside or outside. Ideal around machinery, car pits, on ramps and door steps.
• For interior and exterior use• Helps prevent slips and falls
SAFETY PRODUCT
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
SUITABLE SURFACES:WOOD, CONCRETE, METAL, GRP DRYINGTIME:
OVERCOATTIME:
SPECIAL NOTES:On unpainted concrete use Coo-Var Floor Paint (page 6) thinned 10% with Thinners 14. Soft wood: Penetrating Wood Primer. Hard wood: Aluminium Wood Primer. Metal: Zinc Phosphate Primer.
FINISH:
APPLICATION:AGGREGATED
ESTIMATEDCOVERAGE:Ensure the product is applied at between 6-10 square metres per litre in order to achieve the correct film thicknessBRUSHWASH: THINNERS 14 (do not thin)
Anti-slip Tapes & TreadsAST1
Highly flexible, hard wearing anti-slip tapes and treads for stairs, ramps and walkways. Ideal to enhance safety in critical areas. Adhesive is available for extra strength grip to surface.
SAFETY PRODUCT
TIN SIZES:
Tapes: 50mm wide x 18.2m longTreads:610mm x150mm
COLOURS:SUITABLE SURFACES:WOOD, CONCRETE, METAL
FINISH:
APPLICATION:ANTI-SLIP
SELF ADHESIVE
SPECIAL NOTES:Flexible enough for stair edges and rounded corners.Apply direct.
StencilsIND
Strong and reusable stencils. Ideal for warning signs andgeneral information. Custom made stencils can be ordered.
ACCESSORIES
STENCIL SIZES:
190x300mm, 300x400mm, 400x600mm, 600x800mm
NO PARKINGNO EXITNO ENTRYEXIT ONLYKEEP OUTSTAFF ONLYFIRE EXITKEEP CLEARIN/OUTCAR PARK
RESERVEDPARKINGDANGERENTRANCEVISITORSPRIVATEFRAGILEDISABLEDA-Z & 0-9 SETSARROWS AND CHEVRONS
SPECIAL NOTES:Can be used with a wide range of paints. For guidance please call+44 (0)1482 328053.
Wet Paint Warning Tape
Help prevent your newly painted surface being accidentally spoilt by cordoning off the area with wet paint warning tape orsticking to the floor if it is a wall.
• A cheap and easy way to alert people about wet paint• Helps avoid costly repainting work and compensation claims
ACCESORIES
TIN SIZES:
50mm x 66mAPPLICATION:SELF ADHESIVE
Grey Light Grey
Black Blue Green Tile Red
White Yellow
6-10m²/ l
GreyBlack Black/Yellow
Clear
Red White
Luminescent
Treads available in Black only
5hrs
16hrs
24hrs
or
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 17
Hammercoteand Productsfor Metal
Hammercote SmoothG127
A fast drying, heat resistant coating that gives a smooth glossy metallic finish to metal objects. A hard durable enamel paint that gives a high degree of rust resistance. Ideal for wrought iron, radiators, fences, gates, bikes, trailers, boats, engines etc.
• Apply direct - can be used without a primer• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
BRUSHWASH/THINNERS: HAMMERCOTE THINNERS 15
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:SMOOTH GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:40-45 micronsRecommended Wet Film Thickness Per Coat:100 microns
Hammercote HammeredH126
A fast drying, heat resistantcoating that gives a glossyhammered effect finish tometal objects. A hard durable enamel paint that gives a high degree of rust resistance. Ideal for wrought iron, fences, gates, bikes, radiators, boats, engines etc.
• Apply direct - can be used without a primer• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:HAMMERED GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:40-45 micronsRecommended Wet Film Thickness Per Coat:100 micronsSPECIAL NOTES:
Heat resistant up to 150°C.Full hardness reached after several days.
BRUSHWASH: HAMMERCOTE THINNERS 15 (do no thin)
Hammercote Aerosol: SmoothQ127
A fast drying, versatile coating that gives a smooth glossy finish to metal objects. A hard durable enamel paint that gives a high degree of rust resistance. Ideal for wrought iron, fences, gates, bikes, trailers, boats, engines etc.
• Apply direct - can be used without a primer• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
400mlCOLOURS:
FINISH:
APPLICATION:SMOOTH GLOSS
ESTIMATEDCOVERAGE:Coverage is anapproximation only due to variation in spray techniques.
Hammercote Aerosol: HammeredQ126
A fast drying, versatile coating that gives a glossy hammered effect finish to metal objects. A hard durable enamel paint that gives a high degree of rustresistance. Ideal for wrought iron, radiators, fences, gates, bikes, trailers, boats, engines etc.
• Apply direct - can be used without a primer• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
400mlCOLOURS:
FINISH:
APPLICATION:SMOOTH GLOSS
ESTIMATEDCOVERAGE:Coverage is anapproximation only due to variation in spray techniques.
Based on one coat
Based on one coat
DarkGrey
GoldBlack Blue Bronze Green
Light Green
Purple Red Silver Grey
2mins
Max
15mins
Min
30mins 6hrs
10m²/ l
Black Blue Gold Green Red Silver
White Yellow
10m²/ l
12hrs
30mins 6hrs
or
Black Silver White
Black
4m²/400ml
4m²/400ml
2mins
Max
15mins
Min
30mins 6hrs
2mins
Max
15mins
Min
30mins 6hrs
PAINTS, PRIMERS AND SPECIALISED COATINGS
For further information or to find your nearest Coo-Var stockist18
Hammercoteand Productsfor Metal
Hammercote SatinG126
A fast drying, heat resistant coating that gives a smooth satin finish to metal objects. A hard durable enamel paint that gives a high degree of rust resistance. Ideal for wrought iron,radiators, fences, gates, bikes, trailers, boats, engines etc.
• Apply direct - can be used without a primer• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:SMOOTH SATIN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:40-45 micronsRecommended Wet Film Thickness Per Coat:100 microns
Hammercote Thinners 15V607/15
Thinners for use withHammercote Smooth and Satin (not Hammered). Brushwash for all finishes.
FOR METAL
TIN SIZES:
250ml, 500ml, 1L, 2.5L
COLOURS:
BRUSHWASH/THINNERS: HAMMERCOTE THINNERS 15
All Metals PrimerW201
A general purpose water based primer which can be overcoated with a wide range of topcoats. Will enhance the performance of Coo-Var Hammercote. Is an ideal primer for all metals and galvanised surfaces.
• Fast drying• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:20-25 micronsRecommended Wet Film Thickness Per Coat:85 microns
SPECIAL NOTES:Store away from frost.Not suitable for use when temperature is below 7°C.
BRUSHWASH/THINNERS: WATER
Rust ConverterQ607/10
For use on iron and steelsurfaces where all rust cannot be removed. Will stop the rusting process and allow for the surface to be overcoated. Also acts as a primer. Suitable for domestic painting use as well as industrial and marine environments.
• Water based - even works in damp conditions• Reduces preparation costs
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 2.5LCOLOURS:
FINISH:
APPLICATION:LOW SHEEN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Protect from frost.NOTE: Ideal on very rusty surfaces prior to applying Hammercote.
BRUSHWASH: WATER (do not thin)
Black
10m²/ l
12hrs
30mins 6hrs
or
Clear thin liquid
Grey Red
6hrs
1.5hrs 4hrs
12m²/ l
Milky liquid
Appears navy/black when treatment is complete
8hrs
4hrs 8hrs
For water based paints
24hrs For other paints
10m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 19
Hammercoteand Productsfor Metal
Zinc Phosphate PrimerP201
A high performance metalprimer for use on most metals including aluminium, iron and steel. Suitable for use when wood and metal are combined as it will prime both surfaces. Ideal for fire escapes, window frames, metal gates/doors etc.
• High durability primer - ideal in coastal areas• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:‘Rapidry’ version available.NOTE: Not for use under Coo-Var Hammercote.
BRUSHWASH/THINNERS: THINNERS 14
Red Oxide Metal PrimerF158/65
A good general purpose metal primer for use on ferrous metal.
• Good anti-corrosive properties• For interior and exterior use
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:‘Rapidry’ version available.
BRUSHWASH/THINNERS: THINNERS 14
Hammercote Hammered Finish Hammercote Smooth Finish
Red
Grey Red
13m²/ l
13m²/ l
2hrs
12hrs
12hrs
or
2hrs
12hrs
12hrs
or
PAINTS, PRIMERS AND SPECIALISED COATINGS
SpecialistPaints
For further information or to find your nearest Coo-Var stockist20
Anti-Corrosive Red OxideG150/65
A strong alkyd based red oxide primer and finish in one. Ideal for use on structural steel, tanks, general metalwork, iron gates/pipes etc. Can be left as a finish or overcoated.
• Apply direct• Protects and decorates
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:Apply direct or for extra protection use over Coo-Var Zinc Phosphate Primer (p27).‘Rapidry’ version available.
BRUSHWASH/THINNERS: THINNERS 14
Glass ShadingW454/1
A water based paste for dilution. Ideal to black out excess light and heat in factories andgreenhouses. Helps reduceinterior temperature.
• Apply direct
FOR GLASS
SUITABLE SURFACES:GLASS
DRYINGTIME:
TIN SIZES:
2.5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:10-20 micronsRecommended Wet Film Thickness Per Coat:50 microns
SPECIAL NOTES:Mix to desired opacity but as a guide: 20 m²/l @ 2 parts paste to 1 part water.
BRUSHWASH/THINNERS: WATER
Brick and Tile PaintG150
An alkyd based versatile gloss red finish. Ideal for use on porches, garden walls, outbuildings or any brickwork/masonry etc.
• Apply direct• Protects and decorates
FOR MASONRY
SUITABLE SURFACES:MASONRY, BRICK, RENDER, TILE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:GLOSS, MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:If effluorescence or salts are present, seal first with a suitable sealer such as Coo-Var Alkali Resisting Primer(p29).
BRUSHWASH/THINNERS: THINNERS 14
Brick and Tile Paint Water BasedW463/65
A water based version with the added benefit of being suitable for concrete and plaster and with a faster drying time.
• Apply direct• Protects and decorates
FOR MASONRY
SUITABLE SURFACES:MASONRY, BRICK, PLASTER, CONCRETE, RENDER, TILE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:Do not use in cold damp conditions below 7°C.
BRUSHWASH/THINNERS: WATER
Red
5hrs
12hrs
24hrs
or
13m²/ l
White
20m²/ l1-2hrs
BrickRed
13m²/ l30mins
6hrs
2hrs
BrickRed
5hrs
12hrs
24hrs
or
13m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 21
SpecialistPaints
Solar Reflecting Paint: AluminiumQ253/3
A bituminous based aluminium paint that gives a highlyreflective metallic finish.Designed to reflect anddissipate heat and sunlight on roofs resulting in a reduction of heat build-up.
• Apply direct• Can be used on flat roofs
MULTI PURPOSE COATINGS
SUITABLE SURFACES:FELT, ASPHALT, WOOD, BRICK, CONCRETE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
5L, 25LCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:45-50 micronsRecommended Wet Film Thickness Per Coat:120 microns
SPECIAL NOTES:Not suitable for unstable surfaces.Do not use in cold/damp conditions.
BRUSHWASH/THINNERS: THINNERS 14
Solar Reflecting Paint: WhiteW489/1
An acrylic, bright whiteaggregated coating used to protect felt roofs. Also helps to reduce heat build-up in roofs and internal areas.
• Apply direct
MULTI PURPOSE COATINGS
SUITABLE SURFACES:FELT, ASPHALT, WOOD, BRICK, CONCRETE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
5LCOLOURS:
FINISH:
APPLICATION:AGGREGATED
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:40-45 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Not suitable for areas prone tostanding water e.g. flat roofs.
BRUSHWASH/THINNERS: WATER
Matt BlackF158/2111
An oil based flat black finish ideal for use on tudor beams, fire places, wrought ironwork,photographic dark rooms, oranywhere a non-reflectivesurface is required. Can also be used on chalk boards.
• For interior and exterior use
MULTI PURPOSE COATINGS
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:45-50 micronsRecommended Wet Film Thickness Per Coat:110 micronsSPECIAL NOTES:
Apply direct onto wood and masonry. On metal use Coo-Var ZincPhosphate Primer (p27).Not suitable for canvas chalk boards.
BRUSHWASH/THINNERS: THINNERS 14
Matt Black Water BasedW463/3
A high opacity flat black acrylic coating. Ideal for use on tudor beams, wrought ironwork,photographic dark rooms,cement or anywhere anon-reflective surface is required.
• For interior and exterior use
MULTI PURPOSE COATINGS
SUITABLE SURFACES:WOOD, METAL, CONCRETE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Do not use in cold damp conditions below 7°C.
BRUSHWASH/THINNERS: WATER
White
8m²/ l45mins
6hrs
3hrs
Aluminium
4-6m²/ l
3hrs
12hrs
12hrs
or
Black
Black
9m²/ l
10m²/ l
2hrs
12hrs
8hrs
or
30mins
6hrs
2hrs
PAINTS, PRIMERS AND SPECIALISED COATINGS
SpecialistPaints
For further information or to find your nearest Coo-Var stockist22
Ebony BlackF159/2
A low sheen product ideal for ironwork, beams, downpipes, radiators etc. Provides a classic black finish.
• For interior and exterior use
MULTI PURPOSE COATINGS
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L
COLOURS:
FINISH:
APPLICATION:LOW SHEEN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:50-55 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Apply direct onto wood and concrete. On metal use Coo-Var ZincPhosphate Primer (p27).
BRUSHWASH/THINNERS: THINNERS 14
Heat Resistant Black EnamelQ253/2
A black enamel for use in areas prone to heat. Will stand up to 600°C indirect heat. Ideal for fire surrounds, radiators, hot pipes etc.
• Apply directSUITABLE SURFACES:WOOD, METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L,COLOURS:
FINISH:
APPLICATION:SATIN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:80 microns
BRUSHWASH/THINNERS: THINNERS 16
Gold PaintG127/2193
A versatile finishing metallic paint that gives a vibrant gloss finish. Ideal for use on railings,radiators, garden furniture, wheels, bicycles, the list goes on.
• Rust resisting
MULTI PURPOSE COATINGS
SUITABLE SURFACES:SUITABLY PRIMED METAL , WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250mlCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:40-45 micronsRecommended Wet Film Thickness Per Coat:100 microns
BRUSHWASH/THINNERS: THINNERS 15
Finest Pale GoldsizeV601/17
A special preparation suitable for guilding work and as a mixing varnish. Used when applying goldleaf.
• Apply direct
MULTI PURPOSE COATINGS
SUITABLE SURFACES:WOOD, METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250mlCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:70 microns
BRUSHWASH/THINNERS: THINNERS 14
MULTI PURPOSE COATINGS
Terebine Liquid DriersV605/3
An additive to assist the drying capabilities of most paints. Helps paint dry in winter months. Use sparingly.
MULTI PURPOSE COATINGS
TIN SIZES:
500mlAPPLICATION:Add approx 2% of paint volume and mix into paint.
SPECIAL NOTES:Dry film only cures fully after heating to above 250°C for 20-30 minutes. Some fume or light generation is associated with initial cure.
Black
13m²/ l
3hrs
12hrs
8hrs
or30mins
16hrs
See notes
or
Black
12m²/ l
Gold
10m²/ l30mins
12hrs
6hrs
Clear
14m²/ l
4hrs
12hrs
12hrs
oror
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 23
SpecialistPaints
Eggshell White FinishF159/1
A traditional oil based paint with a white, low sheen eggshell finish.
• For interior and exterior use
DECORATIVE/DOMESTIC
SUITABLE SURFACES:WOOD, METAL, MASONRY
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:EGGSHELL/SATIN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:Recommended Primers: Wood: Coo-Var Penetrating Wood Primer, Metal: Coo-Var Zinc Phosphate Primer, Concrete: Alkali Resisting Primer.
BRUSHWASH/THINNERS: THINNERS 14
Radiator PaintQ122/1
A high performance, water based radiator enamel. Designed for application to domestic hot water radiators.
• Fast dryingSUITABLE SURFACES:PREVIOUSLY PAINTED RADIATORS
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5LCOLOURS:
FINISH:
APPLICATION:MID GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:44-50 micronsRecommended Wet Film Thickness Per Coat:125-140 microns
SPECIAL NOTES:Do not apply when temperature is below 5°C.
BRUSHWASH/THINNERS: WATER
GlossG105/2
A top quality oil based coating with excellent opacity. Ideal for trim areas such as window frames and doors etc.
• For interior and exterior use• Protects and decoratesSUITABLE SURFACES:WOOD, METAL, GLASS FIBRE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:50-55 micronsRecommended Wet Film Thickness Per Coat:100 microns
SPECIAL NOTES:Stir well before use. Only apply in well ventilated areas. 2010 compliant.Preferably use with Coo-VarUndercoat (F157)
BRUSHWASH/THINNERS: THINNERS 14
Undercoat (for Gloss)F157
An oil based, high opacity undercoat with good flow characteristics. Ideal for use as a foundation coating or when a colour change is required.
• Apply direct to wood and GRPSUITABLE SURFACES:WOOD, METAL, GLASS FIBRE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:LOW SHEEN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:45-50 micronsRecommended Wet Film Thickness Per Coat:75 microns
SPECIAL NOTES:Ideal for use with Coo-Var Gloss (F159/2). 2010 compliant.
BRUSHWASH/THINNERS: WATER
DECORATIVE/DOMESTIC
DECORATIVE/DOMESTICDECORATIVE/DOMESTIC
White
13m²/ l
4hrs
16hrs
12hrs
or
White
6-8m²/ l
1hr
3hrs
3hrs
Min
6hrs
16hrs
12hrs
or
Black
13m²/ l
White
6hrs
16hrs
12hrs
or
Grey White
13m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
Varnishesand Oils
For further information or to find your nearest Coo-Var stockist24
Yacht and Seaplane VarnishV601/27
A traditional marine quality varnish which is very hardwearing and UV resistant. Can be used over existing paintwork to increase gloss finish and weather resistance. Ideal for use on yacht woodwork, doors, gates, fascias, sheds, furniture etc.
• Highly weather resistant
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:70 microns
SPECIAL NOTES:Apply direct.Ideal in coastal areas due to itshard-wearing nature.
BRUSHWASH/THINNERS: THINNERS 14
Acrylic VarnishW462
A water based clear varnish for wood. An ideal alternative to solvent based products.
• Fast drying
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:GLOSS, EGGSHELL
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:70 microns
SPECIAL NOTES:Do not use when temperature will be below 7°C during painting and drying.
BRUSHWASH/THINNERS: WATER
Polyurethane Varnish - Two PackP101/POLY
An exceptionally durable varnish which will not fade or yellow if on an item placed near awindow. Ideal for use on bar tops, furniture and floors.
• Does not support fungus growth and is easily cleaned• For interior and exterior use
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
Pot Life: 6-8 hours @ 20°C
TIN SIZES:
5kg Mixed Unit
COLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:120-135 microns
SPECIAL NOTES:Professional use recommended.
BRUSHWASH: P101 Brushwash (do not thin)
Polyurethane VarnishV606
A single pack urethane product of excellent durability. Ideal for kitchen furniture, worktops and internal doors.
• For interior use
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:GLOSS, EGGSHELL, MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:30-35 micronsRecommended Wet Film Thickness Per Coat:70 microns
SPECIAL NOTES:Apply direct.Hard wearing internal varnish.
BRUSHWASH/THINNERS: THINNERS 14
Clear
6hrs
12hrs
24hrs
or
14m²/ l
Clear (Translucent until dry)
45mins
6hrs
4hrs
14m²/ l
2hrs
12hrs
12hrs
or
Clear
14m²/ l
Clear
35-40m²/5kg unit
3-4hrs 16-24hrs
16hrs
Max
72hrs
Min
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 25
Varnishesand Oils
Siliconised Teak OilV601/28
A blend of natural oils for hard-wood outdoor furniture. Makes timber look natural and oiled rather than glossy like a varnish. Takes better to hardwood than traditional varnish. Siliconised Teak Oil gives better water resistance.
• Weather resistant• Enhances, preserves and restores appearance of teak and hardwoods
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5LCOLOURS:
FINISH:
APPLICATION:OILED
ESTIMATEDCOVERAGE:
SPECIAL NOTES:Ensure surface is dry for 1-2 weeks prior to coating. Apply direct.
BRUSHWASH/THINNERS: THINNERS 14
Danish OilQ271/4
An alternate treatment to Teak Oil to give a hard, durable and water resistant finish. Ideal for use on mahogony, teak and most other timber. Contains tung oil.
• Gives a harder finish than Teak Oil
WOOD PROTECTION
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5LCOLOURS:
FINISH:
APPLICATION:SLIGHT GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35 micronsRecommended Wet Film Thickness Per Coat:70 micronsSPECIAL NOTES:
Use sandpaper to remove unwanted old coatings/paints.
BRUSHWASH/THINNERS: THINNERS 14
Clear
7m²/ l
Dependent on porosity of wood
8hrs
16hrs
24hrs
or
4hrs
12hrs
8hrs
or
Clear
14m²/ l
PAINTS, PRIMERS AND SPECIALISED COATINGS
SpecialistPrimers
For further information or to find your nearest Coo-Var stockist26
Penetrating Wood PrimerP224/1
An oil based, high quality primer for any wood surface which requires priming.
• For interior and exterior use
FOR WOOD
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
Aluminium Wood PrimerP224/2
Ideal for use on knotted orresinous timber to prevent staining. Also acts as an excellent heavy duty wood primer.
• For interior and exterior use
FOR WOOD
SUITABLE SURFACES:WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5LCOLOURS:
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:80 microns
BRUSHWASH/THINNERS: THINNERS 14
BRUSHWASH/THINNERS: THINNERS 14
MDF PrimerW463
A white water based primer for MDF surfaces such as furniture, frames, doors etc.
• For interior use
FOR WOOD
SUITABLE SURFACES:MDF
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
BRUSHWASH/THINNERS: WATER
SPECIAL NOTES:Do not use in cold damp conditions below 7°C.
Patent knottingV604/13
A low viscosity shellac based product. Use on knotted orresinous wood to preventstaining of future paint films.
• For interior and exterior use
FOR WOOD
SUITABLE SURFACES:RESINOUS WOOD
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L
COLOURS:
FINISH:
APPLICATION:GLOSS
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:20 micronsRecommended Wet Film Thickness Per Coat:75 micronsBRUSHWASH/THINNERS:
METHYLATED SPIRIT
3hrs
16hrs
8hrs
or2hrs
16hrs
8hrs
or
Silver Grey
12m²/ l
White
13m²/ l
30mins
6hrs
2hrs
White
13m²/ l
Translucent Brown
14m²/ l
10mins
6hrs
3hrs
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 27
SpecialistPrimers
Rust ConverterQ607/10
For use on iron and steelsurfaces where all rust cannot be removed. Will stop the rusting process and allow for the surface to be overcoated.
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 2.5LCOLOURS:
FINISH:
APPLICATION:LOW SHEEN
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:100 microns
All Metals PrimerW201
A general purpose water based primer which can be overcoated with a wide range of topcoats. Will enhance the performance of Coo-Var Hammercote. Is an ideal primer for all metals and galvanised surfaces.
• For interior and exterior use• Fast Drying
FOR METAL
SUITABLE SURFACES:MOST METALS INC. IRON, STEEL,ALUMINIUM, BRASS, COPPER
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:20-25 micronsRecommended Wet Film Thickness Per Coat:85 micronsBRUSHWASH/THINNERS: WATER
BRUSHWASH: WATER (do not thin)
SPECIAL NOTES:Store away from frost. Do not use in temperatures below 7°C.
SPECIAL NOTES:Apply when humidity is between 40-90% and when temperature is above 7°C. Protect from freezing.
Zinc Phosphate PrimerP201
A high performance metalprimer for use on metals including aluminium, iron and steel. Suit-able for use on combined wood/metal as it will prime both surfac-es. Ideal for fire escapes, window frames, metal gates/doors etc.
• For interior and exterior use• High durability primer - ideal in coastal areas
FOR METAL
SUITABLE SURFACES:METAL
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:SEMI-MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
Red Oxide Metal PrimerF158/65
A good, general purpose metal primer ideal for ferrous metallic surfaces.
• Good anti-corrosive properties
FOR METAL
SUITABLE SURFACES:FERROUS METALS
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
BRUSHWASH/THINNERS: THINNERS 14
BRUSHWASH/THINNERS: THINNERS 14
SPECIAL NOTES:‘Rapidry’ version available.NOTE: Not for use under Coo-Var Hammercote.
1.5hrs
6hrs
4hrs
Grey Red
12m²/ l
8hrs
4hrs 8hrs
For water based paints
24hrs For other paints
Milky liquid
Appears navy/black when treatment is complete
10m²/ l
Red
13m²/ l
2hrs
12hrs
12hrs
or2hrs
12hrs
12hrs
Grey Red
13m²/ l
or
PAINTS, PRIMERS AND SPECIALISED COATINGS
SpecialistPrimers
For further information or to find your nearest Coo-Var stockist28
Acrylic Primer Sealer UndercoatW463/1
A water based primer with no strong odours. Ideal for plaster preparation or any wood surface.
• For interior and exterior use• Fast drying
MULTI-PURPOSE
SUITABLE SURFACES:WOOD, PLASTER
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:75 microns
All Purpose PrimerW201/1
A general purpose, water based primer. Ideal for use onmulti-surface substrates or when a ‘one solution’ product is required.
MULTI-PURPOSE
SUITABLE SURFACES:WOOD, PLASTER, MASONRY,METAL (INCLUDING ALUMINIUM)
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L, 5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:20-25 micronsRecommended Wet Film Thickness Per Coat:85 microns
BRUSHWASH/THINNERS: WATER
BRUSHWASH/THINNERS: WATER
Stain Block All Purpose PrimerG119
A white, general purposepurpose primer with stainblocking properties. Made with low odour solvents. Gives excellent coverage to a multitude of stains, preventing them from bleeding through to the finishing coat.
• For interior and exterior use
MULTI-PURPOSE
SUITABLE SURFACES:TILES, WOOD, METAL, PLASTER, MOST PLASTICS (TEST A SMALL AREA FIRST)
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
500ml, 1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:100 microns
BRUSHWASH: THINNERS 18 (do not thin)
SPECIAL NOTES:Sources of damp/leaks etc. must be repaired prior to painting.
Tile and Melamine PrimerQ201/3
An ideal primer to use on tiles and melamine prior to painting. For use in kitchens, bathrooms and other tiled surfaces. Most paints will adhere - oil or water based.
• Enables good adhesion of paint to ceramic tiles
FOR TILES & MELAMINE
SUITABLE SURFACES:TILES, MELAMINE
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
250ml, 500ml, 1L, 2.5L
COLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:45-50 micronsRecommended Wet Film Thickness Per Coat:120 microns
SPECIAL NOTES:Do not use in cold damp conditions below 7°C.
SPECIAL NOTES:Do not use in cold damp conditions below 7°C.
BRUSHWASH/THINNERS: WATER
30mins
6hrs
2hrs
1.5hrs
6hrs
4hrs
White
12m²/ l
White
13m²/ l
30mins
4-6hrs
4hrs
White
10m²/ l
White
8m²/ l
2hrs
12hrs
4-6hrs
or
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 29
SpecialistPrimers
Masonry StabiliserV601/36
A binding and sealing solution for degraded/unstable or porous masonry.
FOR MASONRY
SUITABLE SURFACES:BRICK, PLASTER, SCREED
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
APPLICATION:
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:25-30 micronsRecommended Wet Film Thickness Per Coat:110 microns
Alkali Resisting PrimerG119/1
A high quality, low odour solvent based primer/sealer. Ideal for use on alkaline surfaces which can attack conventional decorative coatings. Also helps combat surfaces with varying degrees of porosity.
• For interior and exterior use
FOR MASONRY
SUITABLE SURFACES:PLASTER, MASONRY,
DRYINGTIME:
OVERCOATTIME:
TIN SIZES:
1L, 2.5L, 5LCOLOURS:
FINISH:
APPLICATION:MATT
ESTIMATEDCOVERAGE:Recommended Dried Film Thickness Per Coat:35-40 micronsRecommended Wet Film Thickness Per Coat:100 micronsBRUSHWASH/THINNERS: THINNERS 18
BRUSHWASH/THINNERS: THINNERS 14
SPECIAL NOTES:Check compatibility if over coating with another paint.
SPECIAL NOTES:Sources of damp must be repaired prior to painting.
Wood MDF Plaster Masonry Stabilser
Concrete Cement Render
Mortared Surfaces
Tiles Melamine Stable Felt
Brick Galvanised Metal
Steel Iron Aluminium
High Performance Primer W221/1
Penetrating Wood Primer
Aluminium Wood Primer
MDF Primer
Patent Knotting
Rust Converter
All Metals Primer
Zinc Phosphate Primer
Red Oxide Metal Primer
Anti-corrosive R O Primer
Acrylic Primer Sealer
All Purpose Primer
Stain Block Primer
Tile and Melamine Primer
Masonry Stabiliser
Alkali Resisting Primer
� � � �� � �� �
�
��
�
��
�
� ����� � � � ��� �
�� ���
����
�
�
��
���� �
��� ���M
�
B
MM
B B B
Suitable
Following suitable treatment with Mordant SolutionBinder solution for treatment of unstable masonry surfaces
2hrs
12hrs
12hrs
or
Clear
9m²/ l
White
10m²/ l
30mins
4-6hrs
4hrs
PAINTS, PRIMERS AND SPECIALISED COATINGS
For further information or to find your nearest Coo-Var stockist30
Accessories andPromotional Aids
WET PAINT WARNING TAPE VANDALENE WARNING SIGNS
FREE STANDING MEAL SHELF UNIT POINT OF SALE CARDBOARD DISPLAY
Along with paint, Coo-Var also stock other items that may be of use to you or your customers. For a full list, see the pricelist or contact the sales office.
Help prevent your wet paint from being damagedaccidentally - and avoid the cost that goes with repainting. Tape is self adhesive
• Protects from liability should peoples clothes be damaged• 66m long x 5cm wide
A laminated poster designed to be used where Coo-VarVandalene is to warn innocents of the presence of the paint but also to deter potential intuders.
• Avoid complaints• Available in A4 and A5 sizes
This professional and strong merchandiser is approx. 1m wide x 2.1m tall. Has five shelves that hold 5L and smaller tins.
• Promote whichever Coo-var products you like• Adjustable shelves
This free standing cardboard merchandiser has the benefit of being very visual with a small footprint. Lightweight but strong. Holds 2.5L tins and smaller over four shelves.Approx. 49cm wide x 140cm tall.
• Can be easily moved• Available with choice of three headers: GP101 Anti-graffiti, Suregrip and General Paints, Primers and Specialised Coatings
COLOUR CARDS/SWATCHES COLOUR CARDS/SWATCHES
A printed representation of the colour finish of Coo-VarHammercote. Contains, Smooth, Hammered and Satin finishes.
• Attaches easily to your shelves• Small enough not to cover up branding/prices etc.
Shows a colour representation of Coo-Var floor paints. The Suregrip and Profloor Red with aggregate are genuine paint outs.
• Handy to display near shelf and keep a copy at the till
In store promotional items that catch the eye will improve brand awareness and increase sales. To help you make the most of your Coo-Var stock, we have many promotional aids available; here are just a few:-
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 31
Accessories andPromotional Aids
THREE SIDED COLOUR CHART COUNTER TOP LEAFLET DISPENSER
Provides accurate colourswatches that have been painted not printed for many Coo-Var products.
As a three sided prism it is free standing and eye catching.
The three sides are:
• Floor, Sport and Line Marking• Safety and Security• Specialist Paints and Primers
This Coo-Var branded leaflet dispenser holds A4leaflets/brochures. Sturdy and free standing. Ideal for counter tops or shelves.
RANGE BROCHURES
We have a four page A4brochure for each of ourseven Coo-Var ranges.The back pagescontain basictechnicalinformation.These can bedisplayed in store.
PAINTS, PRIMERS AND SPECIALISED COATINGS
Guidance Notes andSpecification Information
For further information or to find your nearest Coo-Var stockist32
General guidance on use and preparation is given below. Full technical, health & safety information and directions are available on the tins and data sheets. It is essential that a full understanding of the product and its uses is obtained before use.
Preparation: Ensure all surfaces are clean and dry. Smooth surfaces generally benefit from roughening or rubbing down prior to painting. Fill and make good any damage. Remove loose/flaking materials. With somespecial coatings check for compatibility and climate/temperature issues, (e.g. suitability of the product in certain weather/humidity. See guidance in this brochure).Examine the area to cover and ensure you have thecorrect amount of paint. Perform any etching ordegreasing required. Use fungicidal washes if necessary. Thoroughly inspect the surface after preparation to ensure everything is clean, dry, repaired and ready to paint.Priming: Depending on the product and application you may need to prime the surface first with a priming coat (sometimes thinned) or use a specific primer (e.g.anti-corrosive primers on steel, wood primers on wood, stabilisers on masonry or sealer coats). A primer will ensure the best performance of the top coat. Read theinstructions and technical information prior to use.Finishing: Ensure the primer, if used, is dry. If a two-pack system is used make sure that you overcoat the primer within the correct time period. Failure to do this can result in the topcoat flaking off the primer. Apply in the correct conditions of climate etc. and ensure all the necessary health & safety regulations are adhered to. Keep to the correct coverage, ensuring the product is not applied too thickly as this will impair drying and performance.Clean Up: Clean all equipment with the relevant solvent be it water or oil based thinners and dispose of any waste in the correct way. Do not tip excess paint into the drains or watercourses.
SURFACE PREPARATION OF IRON & STEELDue to the manufacturing and production methods of iron and steel, they have a surface condition which is not compatible with the application of paint coatings. Steel in particular, has a dark appearance which results from a surface layer of mill scale. It is essential to eliminate all traces or mill scale and corrosion prior to the application of paints. There are several methods of cleaning thesurface of rust and scale.Chipping: Chipping by manual or mechanical means is usually in conjunction with wire brushing, but is not suitable for preparation of substrates to be overcoated with high performance paint systems such as 2 pack epoxy high build coatings. It can be used to remove thick rust
GENERAL INFORMATION ON PREPARATION
scale before subsequent blasting or other preparation.Flame Cleaning: Flame cleaning can be used to remove scale but not rust.Wire Brushing: Wire brushing is a conventional method of preparation, usually carried out with rotating or hand wire brushes. It is not suitable for the removal of mill scale. The wire brushed surfaces are not completely free of corrosion. They tend to be polished and contaminated with oil, which decreases the adhesion of the priming paint affecting performance of the paint system. Disc sanding is usually required to complete the preparation and is even better to start and finish the work.Sweep or Light Blast Cleaning: Sweep or light blast cleaning is a manual operation to remove any light rust and surface contamination from a coated steel surface.Blast Cleaning: Blast cleaning involves forcing a stream of abrasive particles at high speed against the surface to be prepared. It can either be hand operated or automaticand is the best method of preparation. The most common types used are centrifugal, compressed air and vacuum blast cleaning. Commonly two types are used; “shot” where the particles are mostly spherical and should con-tain only a minimum of irregular shapes and “grit”, where the particles show angularity of form and have shape cutting edges. Unless otherwise specified,mineral grit should always be used.
DEFINITIONS OF VARIOUS PREPARATIONS OFTENQUOTED ON SPECIFICATIONS:Sa 3 The surface of the steel is metallic-white, there are no traces of corrosion or shadow after blast cleaning.Sa 2 1/2 Careful abrasive blast cleaning. The surface is metallic-white, there are no traces of corrosion but some lightly coloured greyish shadows might remain.Sa 2 This preparation should lead to the almost entire elimination of traces of rust and scale. Some points of corrosion might remain and some very adherent mill scale particles after blast cleaning.Sa 1 Sweep blasting. Some oxidised parts and scale remain. The metal maintains the colour of rust.St 3 Operation usually applied to pre-primed steel or de-scaled raw steel. Brushing, abrasive discs and mechanical grinding are employed. The surface must have a very clean metallic-white appearance.St 2 Operation conducted manually by brushing with a steel brush, scraping etc. The aim is to eliminate powdery, non-adherent and scaly corrosion. The appearance is a light metallic gloss.After blast cleaning iron or steel, the surface will have a rough profile which will affect the coverage of paint. The surface area is thus larger, hence will require more paint.
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 33
Guidance Notes andSpecification Information
GENERAL PROCEDURE WHEN PREPARING TO PAINT A FLOOR
The best performance from any floor paint is only achieved if the surface to be painted is correctlyprepared.IMPORTANT NOTEAlways thoroughly stir any coating prior to use (1 to 3 mins). Always apply the product to the recommended thickness using the coverage guide. Failure to do this will result in the drying time being extended and the performance of the product may be affected. The full hardness of most floor coatings is achieved over 5-7 days.
Concrete New Unpainted: Leave to cure and dry fully, normally about three months (or 1 month per inch of screed) or check moisture content is below 14%.Thoroughly remove any scale or salts (Coo-Var Acid Etch is a good way to do this) Particularly essential on power floated or exceptionally smooth surfaces to provide a key. Once clean, ensure surface is dry and then apply the selected Coo-Var floor coating according to directions. A priming coat will enhance performance.Concrete Old Unpainted: Thoroughly clean and remove any grease or oil. This can be done with Coo-VarUniversal Degreaser. Coo-Var Acid Etch may then be used to remove any residual scale or salts. It may be necessary to clean and roughen the surface with an industrialabrading machine where the surface has becomepolished by long term use or is smooth or granolithic. Apply the selected Coo-Var floor coating according to directions having removed all the residue of the cleaning process. Specific primers or a thinned first coat can be used to assist adhesion of any Coo-Var floor coating to the surface in extreme cases.Concrete Old Previously Painted: Thoroughly clean and remove any loose/flaking material. Seal/etch prime any exposed areas as appropriate and ensure the previous paint is compatible with the selected Coo-Var floorcoating. The new paint must “key” to the old. This can be done by roughening smooth surfaces. Coo-Var HighPerformance Primer can be used as a barrier coatbetween old and new coatings to prevent interaction and to prime the surface. Proceed as directed on the selected Coo-Var floor coating data sheet.Metal Unpainted: Thoroughly degrease and clean the surface. Prime with an appropriate metal primer, ensuring compatibility with the slected floor coating, which should then be applied once the primer is dry.Metal Previously Painted: Thouroughly degrease and clean the surface, then apply a compatible primer. Test the existing paint for compatibility with the selectedCoo-Var product. If there is incompatibility (e.g. reaction such as blistering of the old paint etc.) then either coat
with a suitable barrier coat or preferably remove all the old paint. Re-paint as with unpainted metal surfacesinstructions. Proceed as shown in the coating directions.Wood Unpainted: Thoroughly clean the surface and coat with a wood primer which is compatible with the selected Coo-Var floor coating. Proceed as shown in the directions.Wood Previously Painted: Thoroughly clean the surface and spot prime any exposed wood with a suitable wood primer. Test the existing paint for compatibility with theselected Coo-Var floor coating. If there is incompatibil-ity (e.g. reaction such as blistering of the old paint etc.) then either coat with a suitable barrier coat or preferably remove all the old paint. Take care with raised wood grain which is prone to resist wear and form hollows.
SPECIAL NOTEEnsure good ventilation and brush or roller out the correct film thickness. Take exceptional care to achieve this,especially on uneven surfaces to avoid pooling. Failure to do this will effect drying time and performance of the product. Check the first coat is dry before applying a sec-ond. Brush out any unavoidable pools which have formed.
SPECIAL POINTS WHEN USING 2 PACK PRODUCTS1. Materials used must be mixed according to instructions using a slow speed mechanical drill or special paint stirrer for at least 2 minutes. Ensure that the full perimeter and depth of the container is covered by the mixing action. This will eliminate any soft spots caused by unmixed resins and ensure a uniform mix.2. Primer and topcoat coverage will vary depending on the porosity and roughness of the surface.3. Topcoats (i.e Profloor Plus, Profloor Floor Paint) should be brushed/rolled out to achieve the specified coverage at the correct dried film thickness. Failure to do this will result in an inconsistent or patchy finish.4. Ensure overcoat times specified are followed. Failure to do this may result in a subsequent system failure.5. Temperature and humidity are critical factors when applying two pack water based products. Temperature during application must be above 10°C and below 30°C. Excess humidity and extreme temperatures will affect the finish and can cause colour variation even in containers filled from the same batch product.6. We recommend the same batch of a product to be used on a large area, this helps ensure a uniform finish and colour throughout.7. Apply the product within the specified pot life.8. Always read in full health & safety and technicalinformation before using a product.Two pack systems are chemically reactive and care should be taken when using.
PAINTS, PRIMERS AND SPECIALISED COATINGS
Guidance Notes andSpecification Information
For further information or to find your nearest Coo-Var stockist34
If a pool is painted without care a host of problems are likely to occur. Always remember that a pool is aspecialised structure and should not be treated as just another wall to be painted.For various technical reasons, most paints do not last when submerged in water. Teamac Chlorvar is a carefullyselected blend of chlorinated rubber, pigment andsolvent. In its dried form it will withstand constant immersion in normal pool water providing both an attractivedecorative finish and a long life protective finish.Our Technical Services Department can provideinformation for specific application and ancillary items such as steel support structure over indoor pools.Please contact us on 01482 328053.SURFACE PREPARATIONSurfaces to be painted should be free from nibs, cavities and other imperfections. Any mould or oil stains must be removed. Moisture content of concrete should be below 14% prior to application of any coating.New unpainted concrete poolsIf a swimming pool is being constructed with a view to treatment with Chlorvar Chlorinated Rubber Paint a uniform wood float finish to the concrete is preferable to a steel trawled finish, which is more likely to produce a film of laitance or scum on the surface and may lead to poor adhesion or blistering of the enamel.To prevent back pressure the construction of the pool should have included a waterproof membrane on the soil side. Allow the structure to dry out thoroughly before painting (normally at least 28 days). The surfaces should then be treated with Acid Etch diluted three times with clean water:- Wet the surface with fresh clean water from a hosepipe and then apply the Acid Etch with a sweeping brush or turks head brush. The operator should wearrubber boots and gloves and wear suitable eyeprotection. The surface will foam vigorously and bubble. When the reaction has subsided, hose down to wash away loose particles of sand and all soluble materials until the washings are totally clean then leave at least 24 hours to dry out (i.e. less than 7% moisture content). If in any doubt contact Coo-Var Technical Services to be sure.PREVIOUSLY PAINTED POOLSIf the pool was previously painted with ChlorvarChlorinated Rubber and is in good condition it is safe to proceed after scrubbing down to remove dirt etc and roughen the surface to help adhesion.Old perished Chlorvar coatings must be removed bythorough scraping. All loose edges should be removed.After many years wear and tear it may becomenecessary to remove all the old coatings by grit blasting Finally, remove all debris and dirt. If pool is in a hard
water area, white carbonate deposits will be clinging to the old paint after cleaning down. These should be removed using Acid Etch diluted three times with water.COATING APPLICATIONApplication conditions for Chlorvar Chlorinated Rubber must receive careful consideration, the weather being one of the chief factors. A warm, but cloudy day is ideal as it is not desirable to apply the coating in direct sunlight. Never work when the concrete is damp (e.g. morning dew or after rain) or if rain is likely before the Chlorvar will have had time to dry.Application of first coat: On new pools, thin the first coat of Chlorvar (approximately 10% by volume) to aidpenetration into the concrete. If the pool is already painted there is no need to thin the first coat. Apply either by brush or short pile roller. Do not attempt to use spray equipment. For ease of access first paint the sides and then complete the floor. Take care not to apply too thickly, especially on the floor (Use the coverage guide to make sure you use the correct amount of paint – see tin for details) as this may lead to solvent entrapment due to a thick film being applied and subsequent blisterscausing failure of the coating. Do not apply to dampsurfaces. Do not use on very hot or very windy days.Application of the second coat: After leaving the first coat to dry for a minimum of 24 hours (but preferably 48 hours) apply an un-thinned coat of Chlorvar. Do notoverwork the paint otherwise the first coat will be disturbed too much. Some “bite” into the first coat is normal.Application of the third coat if required: after leaving the second coat to dry for a minimum of 24 hours (but preferably 48 hours) apply a third coat of Chlorvar. Do not overwork the paint otherwise the second coat will be disturbed too much. Some “bite” into the second coat is normal.Filling with water: Leave the pool for a minimum of 14 days before filling with water. If this is ignored, entrapped solvent will cause small blisters to form in the paint. Indoor pools should be well ventilated during this time. Thesolvent is heavier than air therefore it may be necessary to use forced ventilation in deep indoor pools.Tile or mosaic pools: We do not recommend thepainting of these surfaces under any circumstances.NOTES: We are unable to guarantee compatibility with other manufacturers paints. In general, however, Chlorvar will be satisfactory on another pure chlorinated rubber pool paint in good condition. We do not recommend it to be applied over existing acrylic, vinyl or cement based pool paints. All drying/curing times are based on 20°C.All coatings to be applied in accordance with relevant technical and health & safety data sheets.
A GUIDE TO SWIMMING POOLS
PAINTS, PRIMERS AND SPECIALISED COATINGS
call us on +44 (0)1482 328053 35
Guidance Notes andSpecification Information
CLIMATIC AND ENVIRONMENTAL ASPECTS FOR CONSIDERATION WHEN APPLYING PAINT
AIR AND SURFACE TEMPERATUREThese two parameters affect the physical properties of the products during preparation and application. For all products, these criteria have an influence on the touch dry time and on complete drying and over coating times. At low temperatures drying times will be slower.This also applies to properties such as viscosity and the rate and nature of dilution. At high temperatures viscosity will decrease and at low temperatures it will increase.It is therefore important to store the products in areas in which the temperature will be close to the optimumconditions for use and to use a suitable thinner.HumiditySome water in the form of invisible vapour is intermixed with the air throughout the atmosphere. It is thecondensation of this vapour which gives rise to clouds, rain, snow, dew, frost and fog. There is a limit to how much water vapour the air can hold and this limit varies with temperature. When the air contains the maximum amount of vapour possible for a particular temperature, the air is said to be saturated. Warm air can hold more vapour than cold air. In general the air is not saturated, containing only a fraction of the possible water vapour.Dew PointThe dew point indicates the amount of moisture in the air. The higher the dew point, the higher the moisture content of the air at a given temperature. Dew point is defined as the temperature to which the air would have to cool in order to reach saturation. A state of saturation exists when the air is holding the maximum amount of water vapour possible at the existing temperature and pressure.Condensation of water vapour begins when thetemperature of air is lowered to its dew point and beyond. The dew point, like other measures of humidity, can be calculated from readings taken by a hygrometer.CondensationCondensation is the process whereby water vapour in the atmosphere is returned to its original liquid state thus causing a surface to become wet. This is a problem which tends to occur particularly at the start or end of a day, especially outside. Condensation is not a matter of one particular temperature but of a difference between the two. Condensation of water vapour occurs when the temperature of air is lowered to its dew point. At this point a problem will occur when you paint a surface.
• The information given in this brochure is correct to the best of our knowledge. Products will only perform as designed if the directions are followed. Please read all technical and health & safety information as well as directions on the product label. If you do not have this information, contact your local stockist or Coo-Var Technical Services on 01482 328053 before using the product.• Due to the policy of continuous improvement and modernisation to the product range, some of the details may be subject to alteration without notice.• Whilst all information provided is as detailed and accurate as possible, it cannot encompass all sets of conditions and circumstances (e.g. methods of application, weather etc.). The successful application and performance of a coating will always depend on the circumstances of each individual case.
Notes:
www.coo-var.co.uk