pam3600 series printers - kennzeichnungen · or call 1-888-272-3946 and ask for a pam application...

2
n PAM3600 Automotive Electronics Laboratory General Industrial Manufacturing Label capture with vacuum Peel table shuttle to dispense label Apply label while printing next label Outperforming Expectations Brady Thermal Transfer Printers PAM3600 series printers www.bradyid.com/pam3600 * application dependent Outperforming Expectations: An automated print and apply solution from Brady brings best of class equipment, label design/automation software, on-site support, and auto-dispensing of specific materials to make any label automation project a success. The Brady PAM3600 is the next generation in reliable print and apply automation for small (down to 0.197"W x 0.125"H) and difficult to dispense label applications. The PAM3600 is built from the ground up for print and apply and is NOT just a modified printer that “hopes” to auto-dispense. Building on the PAM3000 before it, the PAM3600 utilizes the same patented dispense technology and makes improvements in size reduction, cycle time, print resolution options, applicator options, and communications. Auto-Dispense Reliability: Patented label dispensing mechanism captures labels with vacuum before dispensing from the liner for placement accuracies of +/- 0.012"* Tensioning controls maintain a consistent force on the supply roll to prevent it from damage Moving printhead allows for dispensing clearance without secondary positioning movements or backfeeds that can compromise placement tolerances Brady’s expertise with auto-dispense in label manufacturing and material development ensures maximum production uptime Versatile Options for Print and Apply Automation Print and Apply labels one at a time when you need it (Zero Queue) Print next label while the one before is being applied for cycle times down to 2.5 seconds* Validate 2D or 1D bar codes after printing, but before application to make sure only readable labels are applied Ribbon and label low sensors to alert production staff of upcoming need to change material Three standard applicator options for 0 or 90 degree placements and up to 11.8" of stroke Ability to easily integrate a 3rd party applicator for even more flexibility in placement 300 or 600 dpi print resolution options PAM3600

Upload: others

Post on 29-Dec-2019

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PAM3600 series printers - Kennzeichnungen · or call 1-888-272-3946 and ask for a PAM application engineer. The products you need: When performance matters most. From software to

n PAM3600

■ Automotive

■ Electronics

■ Laboratory

■ General Industrial Manufacturing

Label capture with vacuum

Peel table shuttle to dispense label

Apply label while printing next label

O u t p e r f o r m i n g E x p e c t a t i o n sB r a d y T h e r m a l Tr a n s f e r P r i n t e r s

PP AA MM 33 66 00 00 ss ee rr ii ee ss pp rr ii nn tt ee rr ss

w w w . b r a d y i d . c o m / p a m 3 6 0 0

* application dependent

OOuuttppeerrffoorrmmiinngg EExxppeeccttaattiioonnss:: An automated print and apply solution from Brady brings best of class equipment, label design/automation software, on-site support, and auto-dispensing of specific materials to make any label automation project a success. The Brady PAM3600 is the next generation in reliable print and apply automation for small (down to 0.197"W x 0.125"H) and difficult to dispense label applications.

The PAM3600 is built from the ground up for print and apply and is NOT just a modified printer that “hopes” to auto-dispense. Building on the PAM3000 before it, the PAM3600 utilizes the same patented dispense technology and makes improvements in size reduction, cycle time, print resolution options, applicator options, and communications.

AAuuttoo--DDiissppeennssee RReelliiaabbiilliittyy:: ■ Patented label dispensing mechanism captures labels with vacuum

before dispensing from the liner for placement accuracies of +/- 0.012"*■ Tensioning controls maintain a consistent force on the supply roll to

prevent it from damage■ Moving printhead allows for dispensing clearance without secondary positioning

movements or backfeeds that can compromise placement tolerances■ Brady’s expertise with auto-dispense in label manufacturing

and material development ensures maximum production uptime

VVeerrssaattiillee OOppttiioonnss ffoorr PPrriinntt aanndd AAppppllyy AAuuttoommaattiioonn■ Print and Apply labels one at a time when you need it (Zero Queue)■ Print next label while the one before is being applied for cycle

times down to 2.5 seconds*■ Validate 2D or 1D bar codes after printing, but before application

to make sure only readable labels are applied■ Ribbon and label low sensors to alert production staff

of upcoming need to change material■ Three standard applicator options for 0 or 90 degree

placements and up to 11.8" of stroke■ Ability to easily integrate a 3rd party applicator for

even more flexibility in placement■ 300 or 600 dpi print resolution options

PA M 3 6 0 0

Page 2: PAM3600 series printers - Kennzeichnungen · or call 1-888-272-3946 and ask for a PAM application engineer. The products you need: When performance matters most. From software to

PA M 3 6 0 0 S E R I E S P R I N T E R S

For more information about the PAM3600 series, visit www.bradyid.com/PAM3600 or call 1-888-272-3946 and ask for a PAM application engineer.

The products you need: When performance matters most. From software to printers to scanners, labels, and more, Brady helps keep your employees safe and your business productive.

■ BradySoft™ Labeling Software ■ BradySoft SentinelTM Print Automation Software■ Code Reader 1D/2D hand held scanners ■ Over 800 stock materials available

w w w . b r a d y i d . c o m / p a m 3 6 0 0

© 2007 Brady Worldwide, Inc. All Rights Reserved.Printed in U.S.A. 2-08-MI-10K

Technical Data - PAM 3600Printhead

Print resolution dpi 300 600Print width max. 4.16" / 105.6mmLabels

Material thickness1) 0.003-0.010" / 0.076-0.254mmMedia roll: Total diameter 7.87" / 200mm

Core diameter 3.00" / 76mmWinding direction Outside / Inside

Width of liner1) 0.98-4.72" / 0.25-120mmLabel width 0.197-4.276" / 5-115mmLabel height 0.125-2.362" / 3.18mm-60mmRibbon

Ink Outside / InsideRoll diameter 3.15" / 80mmCore diameter 1.00" / 25mmWidth max. 4.49" / 450mmTechnical Data

Height / Depth / Width 15.4-16.5-10.9"390-420-277mm

Weight 40lbs / 18kgPower supply 100-240 V-50/60 Hz, PFCEnergy consumption max. Max. 300 WOperating temperature 10-35°C / 50-95°FHumidity non-condensing 30-85%Regulatory CE, FCC class AElectronics

Processor 32 Bit ColdFire/CPU Speed MHz 144

RAM MB 16ROM MB Flash 4Real time clock ■

Operation PanelNavigator pad: keys / illuminated 4 / 8LCD-graphic display

lines / characters 2 / 20Slot for memory card: CompactFlash ■

InterfacesParallel Centronics bi-directional ■

Serial RS 232 C 1.200 up to 230.400 baud/8 bit ■

USB 2.0 Full Speed-slave for PC connection ❑

Ethernet 10/100 Base T, LPD, Raw IP-Printing, DHCP, HTTP, FTP, SMTP, SNMP, Time client

RS 422, RS 485 1.200 up to 230.400 baud/8 bit ❑

Wireless bridge 802.11b ❑

USB master for keyboard and scanner input ■

Low labels output ■

Low ribbon output ■

Status indicator light output ■

Digital I/O interface for third party applicators ■

AccessoriesStatus indicator light tree (Red/Yellow/Green) ❑

Low label sensor ❑

Low ribbon sensor ❑

1D/2D bar code valildator ❑

Remote mountable operation panel ❑

PC-keyboard USB 4-port Hub ❑

Compact PC-keyboard USB ❑

Memory card CompactFlash up to 1 GB ❑

■ Standard ❑ Optional

FontsFont types 5 Bitmap fonts: OCR-A, OCR-B and 3

Vector fonts Swiss 721, Swiss 721 Bold and Monospace 821 available internally, loadable TrueType fonts.

Character sets Windows 1250 up to 1257, DOS 437, 737, 775, 850, 852, 857, 862, 864, 866, 869, EBCDIC 500, ISO 8859-1 up to -10 and -13 up to -16, WinOEM 720, UTF-8, Macintosh Roman, DEC MCS, K0I8-R. All West and East European, Latin, Cyrillic, Greek, Hebrew and Arabic characters are supported.

GraphicsGraphic elements Line, arrow, box, circle, ellipse,

filled, filled with fadingGraphic formats PCX, IMG, BMP, TIF, MAC, GIF, PNG

Bar CodesLinear bar codes Code 39, Code 93 Interleaved 2/5

Code 39 Full ASCII Code 128 A, B, C Codabar JAN 8, 13EAN 8, 13 MSIEAN/UCC 128 PlesseyEAN/UPC Appendix 2 PostnetEAN/UPC Appendix 5 RSS 14FIM UPC A, E, E0HIBC

2D Codes Aztec, Codablock F, Data Matrix, PDF 417, Micro PDF 417, UPS Maxicode, QR-Code, RSS 14

SoftwareProgramming Direct control language (text based) ■

Label software BradySoft ❑

Recommended MaterialsB-424 (Paper)B-428, B-434, B-435, B-438 (Metallized

Polyester)B-459, B-483, B-488, B-489, B-8423, B-423 (Polyester)B-498 (Vinyl Cloth)B-473 (Static dissipative

polyester) alternate liner

B-487, B-497, B-457, B-8457 (Polyimide) B-8425 (Polypropylene)B-426 (Amber polyimide)B-477, B-478, B-479 (Static dissipative

polyimide) alternate liner

Other Materials Available ■ Standard ❑ Optional

1) Different materials and geometries may need specific application testing.

■ PAM3600

MS862742

Dobler GmbHRobert-Koch-Straße 46-4870563 StuttgartTel.: 0711 787807-0Fax: 0711 [email protected]