pan seared steak

7/30/2019 Pan Seared Steak

1/13

SERIOUS EATS

The Food Lab's Complete Guide To Pan-Seared SteaksPosted by J. Kenji Lpez-Alt, December 6, 2012

[Photographs: J. Kenji Lopez-Alt]

It's time for another round of The Food Lab. Got a suggestion for an upcoming topic? Email Kenji here, and he'll

do his best to answer your queries in a future post. Become a fan ofThe Food Lab on Facebook or follow it on

Twitterfor play-by-plays on future kitchen tests and recipe experiments.

Summers are made for the grill, but what's a steak lover to do when the weather's too cold and wet to light the

suckers up? Just cook them indoors. Indeed, pan-seared steaks have several distinct advantages over grilled

steaksenough that there are times when given the two choices, I'll choose pan-seared just for the sake of it.

While grilling will get you a rapid-fire crust on your steak with all those delightfully crisp, on-the-verge-of-burnt bits

and a good smoky flavor, I find that the even golden brown crust you can develop in a hot cast-iron pan really

accentuates the flavor of the beef itself, letting it shine. On top of that, pan-searing affords you the opportunity to

add your own flavorings in the form of aromatics. Pan-seared steaks come out about 4 percent moister to boot.

Of course, you gotta know how to do it before you can git 'er done.

If you want to jump straight into the action, check out the step-by-step illustrated slideshow above, or go straight

to the recipe here.

The Basic Method

When I've got plenty of time to kill, I occasionally employ a low-and-slow cooking method, such as sous-vide, or

perhaps the reverse sear method I developed at Cook's Illustrated, in which you start the steak in a very low oven

and finish it off on the stovetop.

But you know what happens 99 percent of the time? I've got a steak, I want to get it on the table, and I don't want

to fuss with it. After all, a steak is a quick-cooking thing. The king of fast food, if you will. I don't want to have to

heat up a water bath or my oven, I don't want to have to wait for hours. That means I want to do it start to finish on

the stovetop. Luckily, this is very easy to do.

The TL/DR version: start with a good, thick, well-marbled steak. Season it well. Sear it in hot oil in cast iron,

flipping as often as you'd like. Add butter and aromatics. Keep flipping and basting. Rest. Carve. DIG IN.

Read on for the long version.

What Steak Should I Use?


2/13

You can't end up with a great cooked steak if you start with a crummy raw steak. For the record, we're talking high

-end steaks herethose are the tender ones cut from the loin of the cow that generally command the highest

prices at the market.

There are four different high-end steaks that you should know and each one is a little different.

Ribeye, also known as a Delmonico or entrecte, is my personal favorite. It comes with a large, tender eye of

meat surrounded by a swath of fat and a cap that comes from the spinalis muscle. This cap is far and away

the juiciest, most flavorful piece of meat that you'll find on any steak. Some folks might find a ribeye to be a

little too rich and fatty. Some folks may well be lacking joy in their life.

Strip, also known as New York Strip, Kansas City Strip, or contre-filet, is similar in texture to that central eye of

meat in a ribeye steak. That's because it comes from the exact same muscle, just a little further back down

along the cow. People enjoy strip steak for its relatively tender texture and good amount of marbling (more on

that in a minute).

Tenderloin, also known as filet mignon, is the most tender cut of meat on the cow. When cooked, it has a

buttery, almost spoon-tender texture. But what it has in tenderness, it lacks in flavor. As a nearly unused

muscle in the cow, the tenderloin generally has very little fat, and almost no flavor to speak of, despite its crazy

price tag.

T-Bone, also known as Porterhouse when the tenderloin section is at least 1 1/2-inches wide, is simply a slice

of rib with both the strip and the tenderloin still attached. It's certainly an impressive and daunting cut of meat,

but I recommend avoiding it. See, the problem is that with relative little fat and a smaller profile, that small

tenderloin section ends up cooking much faster than the larger strip section. What this means is that by the

time your strip is perfectly medium rare, your tenderloin is overcooked. You're better off cooking your strip and

tenderloin separately if you want both. That said, basting can help even out this dilemma.

Here are more tips for choosing a cut of steak.

Making the Grade


3/13


4/13

The thickness of a steak is not just about portion control. Without an adequately thick steak, it's very difficult to get

that contrast between exterior and interior that is so desirable. Thin, thin steaks will tend to overcook before they

can finish developing a nice crust, even over the hottest fire you can muster.

I try to get steaks that are at least an inch and a half thick, if not two inches. This does mean that each steak ends

up weighing in at between 12 ounces and a poundthat's big, even for someone with a big appetite for red meat.

But remember this: It's better to cook one large steak for every two people than to cook two smaller steaks. Learn

how to share.

ging?

There are two types of aging. So-called wet-aged meat is meat that has been placed in a vacuum-sealed bag and

allowed to rest for a few weeks (usually while in transit from packing plant to distributor to supermarket). A wet

aged steak shows some improvement over a standard non-aged steak in terms of tendernessthere are

enzymes present in the meat that will break down tough connective tissue over time.


5/13

Dry-aged meat is meat that has been stored in a temperature and humidity-controlled room for anywhere from a

week and up to 10 weeks or longer. During this time, three things happen:

Moisture loss is a major factor. A dry-aged piece of beef can lose up to around 30 percent of its initial volume

in water loss, which concentrates its flavor.

Tenderization occurs when enzymes naturally present in the meat act to break down some of the tougher

muscle fibers.

Flavor change is probably the most relevant. Due to numerous reasons including enzymatic and bacterial

action, properly dry-aged meat will develop deep nutty, cheesy aromas.

Whether you want dry-aged meat or not is a matter of personal choice. I personally love the funky, blue cheese

notes of a very old dry-aged steak and am willing to shell out the extra 20 to 25 percent it costs. Others prefer the

cleaner flavor of fresh beef.

And despite what some folks may tell you, it is pretty much impossible to dry age properly at home. To age a

steak, you require an intact, untrimmed portion of beef (the outer layers become inedible and must be trimmed

off). You can leave a steak in the fridge for a few days and some amount of tenderization will occur, but this is

hardly the same thing, and in side-by-side taste tests between fresh steaks and steaks "aged" in a homerefrigerator, the differences were nearly undetectable.

Bone In, or Out?

Talk to most chefs and they'll tell you that it's always better to cook meat with the bone-in because it adds flavor.

I've always been pretty skeptical of this one for a number of reasons. First of all, the exterior of a bone does not

have much flavor in it at allyou have to dig down into the marrow to get at it (just ask my dogs). Secondly, meat

muscle fibers are pretty tough customers when it comes to allowing molecules to move around within them.

If an overnight marinade can only penetrate meat by a few millimeters, fat chance that flavor from a relatively

flavorless bone is going to make much difference.

Indeed, I tested this out with a few prime rib roasts a couple months back. One I roasted bone-in, another I

removed the bone and tied it back on, a third I removed the bone and tied it back on with a layer of aluminum foil

in between (to completely prevent any potential transfer of flavor), and the fourth I roasted boneless.


6/13

All three of the roasts with bones tied on them were indistinguishable from each other in both texture and flavor,

so there's that myth smashed for ya. On the other hand, the boneless roast did come out a little dryer in the

specific region where the bone was missing. Really, a bone accomplishes two things: It prevent some moisture

loss by reducing the surface area of a steak, and it keeps that section of the steak from overcooking by acting as

an insulator. Ok, three things if you count looking-really-awesome as an accomplishment.

I personally still go with bone-in cuts when I have the option because I enjoy chewing the crispy bits of fat around

the bone, but don't let anyone force you to do it if you aren't interested.

With pan-seared steaks, bones pose another problem. As the meat heats, it contracts a bit, so while the meat of a

raw, cut steak may be flush with the bone, as soon as you start cooking it, it shrinks away, causing the bone to

protrude. This, in turn, elevates the meat from the pan, making it difficult to brown the areas of meat directly

around the bone.

But there is a solution to this: basting. That is, pouring hot fat over the meat as it cooks. We'll get back to that in a

moment.

Salt It Well

Should you salt your meat right before cooking, well before cooking, or how about after cooking? This is another

point of contention amongst home cooks and chefs alike, and one of the ones for which steakhouse-methods

often get cited as evidence. At (most) steakhouses, they salt the steak right before throwing it on the grill or under

the broiler, so that must be the best way to do it at home, right?

Well, consider that at a steakhouse, when a customer places an order for that giant cte du bouef, It's gonna take

a minimum of 20 minutes to get it to medium rare in the very center. That's a lot of minutes in waiting-at-a-

restaurant-for-your-food-to-come time. They salt right before cooking because they don't have the time to let the

meat sit after salting.

Truth of the matter is that you should salt your meat about 40 minutes before it hits the grill. When the salt first hits

a steak, it sits on the surface. Through the process of osmosis, it'll slowly draw liquid out of the meat, which you'll

see pool up in little droplets. As those droplets grow, the salt will dissolve in the meat juice, forming a

concentrated brine. At this stage in the gameabout 25 to 30 minutes inyour steak is in the absolute worst

shape possible for grilling. That moisture will evaporate right off, leaving you with a tough, stringy crust.

Give it a bit more time, and eventually that brine will begin to break down some of the muscle tissue in the meat,

allowing the juices to be re-absorbed, and taking the salt right along with it.

What does this lead to? Meat that is both better seasoned and more tender and moist when you cook it.

All that said, you will not be destroying anything delicious if you choose to salt your meat straight out of the fridge

and into the pan.

Personally I season my steaks at least a few days in advance, to give the salt maximum time to work its way into

the meat. Why steakhouses don't do this is a mystery to me.

And remember: USE KOSHER SALT, not regular table salt. The larger grains of kosher salt (which should more

accurately be called "koshering salt," as salt itself is always kosherkosher salt is coarse salt used in the

koshering process) are easier to sprinkle evenly with your fingers, and will also draw more initial moisture out of

the meat to dissolve than table salt.


7/13

Rest at Room Temprature Before Cooking? Don't Bother

You may have heard that it's a good idea to let your steak rest at room temperature before you sear it. Here's the

truth: don't bother. A thick cut steak takes a long time to rise in temperature. After half an hour sitting on a plate in

the kitchen, the internal temperature of my test models only rose by about 4F. Even after an hour, they'd barely

risen 9F, not much of a difference. Cooked side-by-side against one straight from the fridge, the cooking time

and eating qualities were nearly identical.

So while it won'y hurt you to let your steak sit at room temperature, you're not really doing yourself any favors

(despite what a certain very angry chef may tell you).

Use Cast Iron

A good cast iron pan is thick, heavy, and designed to hold on to heat for a long, long time. Once properly pre-

heated (that is, smoking hot), a good cast iron pan will practically sear a steak on its own, even if you lift it off its

heat source. Fast searing is essential if you want to build a thick brown crust without overcooking the interior.

Start in Oil, Add Butter Later


8/13

What's the best medium to sear in? Butter, or oil? Some claim that a mixture of both is best, often using the

excuse that butter alone has too low a smoke pointit begins to burn and turn black at temperature too low to

properly sear meat in. Somehow, cutting the butter with a bit of oil is supposed to raise this smoke point.Unfortunately, that's not true. It's because when we say that "butter is burnt," we're not really talking about the

butter as a wholewe're talking specifically about the milk proteins in butter, the little white specks you see when

you melt it. It's these milk proteins that burn when you get them too hot, and believe me, they couldn't care less

whether they're being cooked in butterfat or in oil. Either way, they burn.

What all this means is that the best cooking medium for a steak is actually plain old oil. And make sure to use

plenty of it so that your steak cooks nice and evenly. I like to use at least a quarter cup in a 12-inch skillet.

Adding butter to the pan a few minutes before it's done cooking is a fine idea. This is just enough time to allow the

buttery flavor and texture (butter is creamier tasting than oil because it has a higher percentage of saturated fat)

to coat the meat, but not so long that it will burn excessively, producing acrid undertones.

Because it adds proteins to the mix, butter is a better medium for adding deep brown color to your steak as well,

which means that even if your steak is looking a little pale after its initial sear, once you add that butter, it'll rapidly

take on color.

Flip Out

If there's one piece of steak-grilling advice that people seem to get more persnickety about than anything, it's that

your steak should only be flipped once.

False. This is another hang-on gleaned from steakhouses in which it's simply impractical for a cook to flip more

than once given the number of steaks they have cooking on a grill at the same time. At home, you're probablyonly cooking a few steaks at a time, and it's okindeed, it's betterto flip your steaks more often.

You don't have to take my word for it either. Famed food scientist and author Harold McGee has been advocating

this method for years (and has the data to prove its efficacy). Dave Arnold over at Cooking Issues has replicated

his tests, as have I (with hamburgers). You can quite easily do the test for yourself.

By flipping a steak multiple timesas often as once every 15 seconds or soyou not only end up with meat that's

more evenly cooked, you also cut down on your cook time by as much as a third, and develop a great crust on top


9/13

of that. This is because with multiple flips, neither side is exposed to intense heat for too long, nor does it lose

much heat to the relatively cool air above. It's the equivalent of cooking it from both directions simultaneously.

That said, the difference in the end result is not too pronounced, so if you want to leave the steak alone and enjoy

your beer, or if you feel the need to placate that annoying uncle who gets visibly angered by mutli-flippers, go

ahead and use the one-flip methodit won't destroy your steak.

Fork It If You'd Like

Similarly, using a fork to lift and flip will absolutely not destroy it. To hear people balk at the fork-flippers, you'd

think that a steak is something like a water balloon, ready to shed all its moisture from a single puncture. This is

not how a steak behaves. Rather than a balloon filled with liquid, a steak is actually a series of many many

thousands of long, skinny balloons filled with liquid. Puncturing a single one will have no effect on its neighbor,

and the amount of juice contained in a fork-poke-ful of punctures is small enough not to be noticed.

Still, I find it easier to turn steaks with a combination of spatula-and-tong or spoon-and-tong.

Baste, Baste, Baste!


10/13

Basting is the real key to a perfect pan-seared steak. It performs two different functions.

When Ed walked by the kitchen in the office the other day and saw the big fat steak I was about to cook, his first

question after hearing I was planning on cooking it stovetop was, "Isn't it going to burn before the inside cooks?"

And the answer is yesIF you cook it the traditional one-flip, no-baste way, that is. See, the problem, as Ed

pointed out, is that with a screaming hot skillet, you end up overcooking the outside to a black crisp before the

center has had a chance to even warm up.

A combination of flipping and bastingthat is, spooning hot fat over your meatwill help cook it more gently, and

more importantly, from both sides simultaneously, drastically cutting down on its cooking time. A basted and

flipped steak will hit its appropriate internal temperature a good 35 percent faster than a single-flip, no-baste

steak. How's that for fast food?

Basting also performs one more important function: It's a perfect way to perform touch-up jobs on your crust.

Remember those pale spots that appear around the bones when you try and sear a bone-in steak? Spoon hot

melted butter over them, and they'll quickly color in.

The easiest way to baste is to tilt your pan slightly so that hot butter collects near the handle, then use a spoon to

pour it over the top of the steak.

dd Aromatics


11/13

Did I say that that's all basting does? There's one more function: distributing flavor from your aromatics. After the

butter is melted, I add a handful of herbs such as thyme or rosemary, along with some sweet alliums like shallots

or garlic. They pop and sputter, releasing their aromas and rapidly infusing the fat with their flavor. When you

baste, you're adding that aroma with each spoonful.

USE A THERMOMETER!

I can't possibly emphasize this one enough. Use a thermometer! Use a thermometer! USE A THERMOMETER!

Yes, you may look a bit less macho when you whip out a nifty Thermapen Splash-Proof Instant Read

Thermometerfrom your back pocket, swing out the slender probe and insert it gently into the very center of your

steak to register a reading, but believe me: Perfectly cooked meat will earn you more praise and appreciation than

macho posturing any day of the week.

I like my meat at around 130Fthe medium-rare point. Many folks like their meat rare, but to me, that's a waste

of a good, well-marbled cut of beef. You want your fat to be warm enough that it starts melting a bit, lubricating

your meat and adding flavor and juice to every bite. With meat that's too rare, your fat remains solid. You end up

with all the calories and not nearly as much flavor.

On the opposite end of the spectrum with medium-well to well-done meat, not only have your juices beensqueezed dry like water from a sponge, but your liquefied fat has already bought itself a one way ticket to the

bottom of your grill.

Remember: Thick steaks will continue to rise in temperature after you pull them off of the grill. Heat from the

exterior layers will travel in as your steak rests. Make sure to pull it off the grill a good five degrees before you

reach your final target.

But what if I don't have a thermometer?


12/13

I get it. Thermapens are pretty expensive. With the amount of use mine gets (pretty much every time I cook), it's

worth the price, and you can always get a slightly slower, inexpensive model like the CDN ProAccurate Quick

Read, but what if you're stuck in the woods with no thermometer in hand? Is there anything you can do?

Yes: Just go ahead and cut the sucker open to take a peek.

Even slicing won't release too many juices.

I know that everyone tells you you shouldn't poke the meat lest you "risk losing valuable juices," but honestly, the

loss is not much. Certainly not enough for you to notice once the steak is done. And given the alternative

(overcooked meat that will have lost a noticeable amount of juice), it's the best alternative out there. (More on that

subject here.)

Take a Rest


13/13

Since I last wrote about resting your meat, there have been some questions called as to the validity of the science

behind it. Here is the prevalent theory as to why resting your steak is important (pulled from an older article of

mine):

As the steak cooks, the muscle fibers on its exterior tighten, squeezing juices out of its surface. This creates an

imbalance of juice in its interior, with most of the liquid being concentrated at the center of the meat. If you cut the

steak open as soon as it comes off the grill, the juice has only one place to goonto your plate. On the other

hand, allow the steak to rest until its temperature has normalized, and the juices will distribute themselves more

evenly throughout its interior. Cut the steak open, and the juice stays put exactly where it's supposed to be: in the

meat.

However, Nathan Myhrvold of the James Beard Best Cookbook winner Modernist Cuisine (see here for some

behind-the-scenes shot of their lab) says otherwise. His claim is that it's not so much about redistribution of

moisture, but that it's about the relative viscosity of hot vs. cool liquids. The juices stay in place because they've

managed to thicken up a bit as they cool.

In either case, the fact remains: Resting your meat works. I recommend resting your steak until its internal

temperature drops to about five degrees below its maximum temperature (That is, serves a medium-rare steak at

125F, or a medium steak at 135F).

Get The Recipe!

If you want to jump straight into the action, check out the step-by-step illustrated slideshow

Or, get the recipe here

About the author: J. Kenji Lopez-Alt is the Chief Creative Officer ofSerious Eats where he likes to explore the

science of home cooking in his weekly column The Food Lab. You can follow him at @thefoodlab on Twitter, or at

The Food Lab on Facebook.

Printed from http://www.seriouseats.com/2012/12/the-food-lab-complete-guide-to-pan-seared-steaks.html

Serious Eats

pan seared steak

Documents