panaji, 10th march, 2011 (phalguna 19, 1932) …...official gazette — govt. of goa series i no. 50...

1931

Panaji, 10th March, 2011 (Phalguna 19, 1932) SERIES I No. 50

Reg. No. GR/RNP/GOA/32 RNI No. GOAENG/2002/6410

PUBLISHED BY AUTHORITY

NOTE

There is one Extraordinary issue to the Official Gazette, Series I No. 49 dated 3-3-2011 namely, Extraordinarydated 8-3-2011 from pages 1927 to 1930 regarding The Goa Value Added Tax (Fifth Amendment) Act, 2011– Not. No.7/2/2011-LA from Department of Law & Judiciary (Legal Affairs Division).

INDEX

Notification/Order

Not.- DE/ENF/SAGAR--KAVACH/PART-V/33/7136Not.- 2/96/2000-HD(G) Part

Ord.- 8/4/2008-LD(Estt.)//Part/454

Not.– 6/2/10-CLM

Ord.- 3/23/93-PER(PF)

Ord.- 7/8/2002-PER(Part file)Not.- 1/2/2006-PER

Not.- 1/10/2005-PEROrd.- CEE/Estt-05-11-2008(Revival)/AE (Civil)/6688

Ord.- GPS/5-14/RevisedRates/3771 &Ord. 5/14/2000/GPS/GPS//PART/3772

Subject

Notifying Major Fish Landing Centres for mechanisedfishing vessels.Giving effect to provisions of the Code of CriminalProcedure (Amendment) Act, 2010.

Revival of posts– Registration Department.

Draft Rules– Goa Legal Metrology Rules, 2011.

Creation of posts– Forest Department.

Revival of posts– Goa Public Service Commission.Amend.to Recruitment Rules, 2008 of Goa Med. College.

R.R.– Directorate of Health Services.Revival of posts– Department of Power.

Revision of subscription rates.

Pages

1931

1932

1933

1933

1964

19661966

19671969

1969

Department

1. FisheriesDir. & ex officio Joint Secy.

2. HomeGeneral DivisionUnder Secretary

3. Law & JudiciaryEstt. DivisionUnder Secretary

4. Legal MetrologyOffice of the Controller,Legal MetrologyController & ex officioUnder Secretary

5. a. Personnel Under Secretaryb. —do—c. —do— Joint Secretaryd. —do—

6. PowerOffice of the ChiefElectrical EngineerChief Electrical Engineer& ex officio Addl. Secy.

7. Printing & StationeryGovt. Printing PressDir. & ex offi. Jt. Secy.

GOVERNMENT OF GOADepartment of Fisheries

Directorate of Fisheries___

Notification

DF/ENF/SAGAR-KAVACH/PART-V/33/7136

Whereas the fish landing in the Stateof Goa takes place at various major landingcentres as well as traditional landing centres.

And Whereas it has become necessary tomonitor all the fish landing centres in theState and restrict the number of landingcentres in the State from the point of view ofCoastal Security.

And Whereas it has been recommendedby the Coastal Security Co-ordinationCommittee that the State Government maydesignate the existing fish landing centresby notifying the same and not to allow fishlandings at any landing centres other thanabove notified.

OFFICIAL GAZETTE — GOVT. OF GOASERIES I No. 50 10TH MARCH, 2011

1932

And Whereas the Government has therefore decided to make it mandatory for the fishing

vessels to land their fish only on the notified landing centres.

Now Therefore the Government hereby notifies, at the first instance, the following majorfish landing centres (fishing jetties) in the State of Goa as fish landing centres for the

mechanised fishing vessels from the State of Goa.

Sr. Name of fish District Location Latitude Longitude NearestNo. landing centre Survey No.

1. Chapora North Goa Chapora 15° 36’,28.00 “N 73° 44’,22.50 “E 359/Part2. Malim North Goa Betim 15° 30’,13.30 “N 73° 50’, 7.30 “E 62/Part I & II3. Cortalim South Goa Cortalim 15° 24’,25.00 “N 73° 54’,36.00 “E 15/Part I4. Khariwada South Goa Vasco 15° 23’,55.00 “N 73° 48’,37.00 “E 87/Part II5. Cutbona South Goa Betul 15° 09’,17.45 “N 73° 57’,15.00 “E 404 & 836. Talpona South Goa Canacona 14° 58’,54.00 “N 74° 02’,15.00 “E 191 Part 0

By order and in the name of the Governor of Goa.

S. C. Verenkar, Director and ex officio Joint Secretary (Fisheries).

Panaji, 16th November, 2010.

——— ———

Department of HomeHome–General Division

___

Notification

2/96/2000-HD(G) Part

The following notifications issued by Ministry of Home Affairs, Government of India, NewDelhi are published in the Gazette of India, Extraordinary Part II Section 1 dated 09-01-2009,Extraordinary Part II Section 3 sub-section (ii) dated 30-12-2009 and Extraordinary Part IISection 3 sub-section (11) dated 30-10-2010 and Extraordinary Part II Section 1 dated22-09-2010, are hereby published for general information of public.


V. P. Dangi, Under Secretary (Home).

Porvorim, 4th March, 2011.

__________

Ministry of Home Affairs___

Notification

New Delhi, the 1st November, 2010

S.O. 2689(E).— In exercise of the powers conferred by sub-section (2) of Section 1 of the

Code of Criminal Procedure (Amendment) Act, 2010 (41 of 2010), the Central Government

OFFICIAL GAZETTE — GOVT. OF GOA

SERIES I No. 50 10TH MARCH, 2011

1933

hereby appoints the 2nd day of November,

2010, as the date on which the provisions of

the said Act, shall come into force.

[F. No. 2/1/2010-Judl. Cell-(ii)]

J. L. CHUGH, Jt. Secy.

______

Notification

New Delhi, the 30th December, 2009

S.O. 3313(E).— In exercise of the powersconferred by sub-section (2) of Section 1 ofthe Code of Criminal Procedure (Amendment)Act, 2008 (5 of 2009), the Central Governmenthereby appoints the 31st day of December,2009, as the date on which the provisions of

the said Act, except Section 5, Section 6 and

clause (b) of Section 21, shall come into force.

[F. No. 1/1/2007-Judl. Cell-Vol. VI]

S. C. SRIVASTAVA, Jt. Secy.

__________

Notification

New Delhi, the 30th October, 2010

S.O. 2687(E).— In exercise of the powersconferred by sub-section (2) of Section 1 ofthe Code of Criminal Procedure (Amendment)Act, 2008 (5 of 2009), the Central Governmenthereby appoints the 1st day of November,2010, as the date on which the provisions ofSection 5, Section 6 and clause (b) of Section21 of the said Act, shall come into force.

[F. No. 2/1/2010-Judl. Cell-(i)] J. L. CHUGH, Jt. Secy.

——— ———

Department of Law & JudiciaryLaw (Establishment) Division

___

Order

8/4/2008-L.D(Estt.)/Part/454

Read: Order No. LD/Estt/18-69/70 dated 8thMay, 1969.

Government is pleased to revive the 4 (four)posts of peon in the Registration Department.

This issues with the concurrence of theFinance (R&C) Department vide their U. O. No.Fin (R&C)/14332076 dated 18-2-2011.

By order and in the name of the Governorof Goa.

N. P. Singnapurker, Under Secretary (Estt.).

Porvorim, 4th March, 2011.

——— ———

Department of Legal Metrology

Office of the Controller & Legal Metrology___

Notification

6/2/10-CLM

The following draft rules which are proposedto be made in exercise of the powers conferredby section 53 of the Legal Metrology Act, 2009(Central Act 1 of 2010) (hereinafter referred toas the “said Act”), are hereby pre-publishedas required by sub-section (4) of section 53 ofthe said Act for information of all the personslikely to be affected thereby and notice ishereby given that the said rules will be takeninto consideration by the Government on theexpiry of 15 days from the date of publicationof this Notification in the Official Gazette.

All objections and suggestions to the saiddraft rules may be forwarded to the Controller,Legal Metrology, Government of Goa,Department of Legal Metrology, Panaji, Goa,before the expiry of the said period of 15 daysfrom the date of publication of this Notificationin the Official Gazette so that they may be takeninto consideration at the time of finalization ofthe draft rules.

DRAFT RULES

In exercise of the powers conferred bysection 53 of the Legal Metrology Act, 2009(Central Act 1 of 2010), and all other powersenabling it in this behalf, the Governmentof Goa, after consultation with the Central


1934

Government, hereby makes the following rules,namely:—

1. Short title and commencement.— (1)These rules may be called the Goa LegalMetrology Rules, 2011.

(2) They shall come into force on such dateas the Government may, by notification in theOfficial Gazette appoint, and different datesmay be appointed for different provisions ofthese rules.

2. Definitions.— In these rules, unless thecontext otherwise requires,—

(a) “Act” means the Legal MetrologyAct, 2009 (Central Act 1 of 2010);

(b) “Government” means the Govern-ment of Goa;

(c) “Reference Standards Laboratory”means a laboratory setup by the CentralGovernment under the Act, whereReference Standards, Secondary Standardsand Working Standards are maintained;

(d) “Schedule” means a Scheduleappended to these rules;

(e) Words and expressions used in theserules but not defined herein shall have thesame meaning as respectively assigned tothem in the Act.

3. Reference Standards, SecondaryStandards and Working Standards.— (1) EveryReference Standard, Secondary Standard andWorking Standard shall be verified andstamped in such manner and after paymentof such fee as may be prescribed by theCentral Government under sub-section (2) ofsection 9 of the Act.

(2) The Reference Standards shall be keptat such place, in such manner and insuch custody as prescribed underthe Legal Metrology (National Standards)Rules, 2011.

(3) The Secondary Standards shall be keptat such place and in such custody as theController may direct.

(4) The Working Standards shall be kept inthe custody of Legal Metrology Officer.

4. Secondary Standard Balances.— (1) A setof Secondary Standard Balances shall bemaintained at every place where theSecondary Standard Weights are kept.

(2) The number, types and specifications ofsuch balances shall be such as may beprescribed under the Legal Metrology(General) Rules, 2011.

(3) Every Secondary Standard Balance shallbe verified at least once within a period oftwelve months and shall be adjusted, ifnecessary, to make it correct within the limitsof sensitivity and other metrological qualitiesspecified under the Act or rules framedthereunder, by the Reference StandardsLaboratory or by the Controller or such otherOfficer as may be authorized by the Controllerin this behalf.

5. Working Standard Balances.— (1) A setof Working Standard Balances shall bemaintained at every place where WorkingStandard Weights are kept.

(2) The number, types and specifications ofsuch balances shall be such as may beprescribed under the Legal Metrology(General) Rules, 2011.

(3) Every Working Standard Balance shallbe verified at least once within a period oftwelve months and shall be adjusted, ifnecessary, to make it correct within the limitsof sensitivity and other metrological qualitiesprescribed under the Legal Metrology(General) Rules, 2011, by the ReferenceStandard Laboratory or at any of the placewhere Secondary Standards are maintainedby the Government.

6. Physical characteristics, configuration,constructional details of Weights and



1935

Measures.— Every Weight or Measure usedor intended to be used in any transaction orfor protection shall conform as regards physicalcharacteristics, configuration, constructionaldetails, materials, performance, tolerances andsuch other details, to the specificationsspecified under the Act or the Legal Metrology(General) Rules, 2011.

7. Use of bullion weights, carat weights,etc.— (1) No weight other than a bullionweight as specified in the Legal Metrology(General) Rules, 2011, shall be used in anytransaction or protection in bullion includingprecious metals, pearls, ornaments or otherarticles made of gold or silver.

(2) No weight other than a carat weightshall be used in any transaction in preciousstones.

(3) Only beam scale of class ‘A’ or class ‘B’category or a non-automatic weighinginstrument of high accuracy class (class II) orspecial accuracy class (class I) shall be usedin any transaction referred to in sub-rules (1)and (2).

8. Use of weights only or measures only ornumber only in certain cases.— Except in thecases of commodities specified in Schedule Ihereto, the declaration of quantity in everytransaction, dealing or contract or forprotection shall be in terms of the unit of,—

(a) weight, if the commodity is solid,semi-solid, viscous or a mixture of solid andliquid;

(b) length, if the commodity is sold bylinear measure;

(c) area, if the commodity is sold by areameasure;

(d) volume, if the commodity is liquid oris sold by cubic measure; or

(e) number, if the commodity is sold bynumber.

9. Licencing of manufacturer, repairer anddealer of weights and measures.— (1) Everymanufacturer or repairer of, or dealer in,weights or measures shall make an applicationfor the issue of a licence to the Controller orsuch other Officer as may be authorized by himin this behalf, in FORM-LM-IA, FORM-LM-IB,FORM-LM-IC, hereto, respectively:

Provided that no licence to repair shall berequired by a manufacturer to repair weightor measure manufactured by him and used ina State other than the State of manufacture ofthe same, but the manufacturer shall informin advance the concerned Legal MetrologyOfficer about such repairing:

Provided that a person who bonafidelyrepairs any weight or measure owned orpossessed by him shall not require a licenceto repair.

(2) Every manufacturer or repairer of, ordealer in, weights or measures shall make anapplication for the renewal of a licence withinthirty days before the date of its expiry to theController or such other Officer as may beauthorized by him in this behalf, in FORM-LM--IIA, FORM-LM-IIB, FORM-LM-IIC, hereto,respectively.

(3) Every licence issued to a manufacturer,repairer or dealer shall be in FORM-LM-IIIA,FORM-LM-IIIB, FORM-LM-IIIC, hereto,respectively.

(4) Every licence issued to a manufactureror repairer or dealer shall be valid for a periodof one calendar year and may be renewed fromyear to year on an application made withinthirty days before the date of expiry of licenceto the Controller or such other Officer as maybe authorized by him in this behalf alongwithfee as specified in Schedule II hereto. The feefor the renewal of licence shall be the sameas for the issue of licence as specified inSchedule II hereto:

Provided that the Controller may entertainthe application made within a period of three


1936

months from the date of expiry of the licence,if he is satisfied that applicant was preventedfrom making application within the timeaforesaid for bonafide reasons, on payment ofadditional fee at full the rate specified inSchedule II hereto.

(5) The fee payable for the alteration of alicence or for issue of a duplicate licence shallbe as specified in Schedule II hereto.

(6) The Controller or such other Officeras may be authorized by him in this behalfshall maintain a register of licencedmanufacturers, dealers and repairers inFORM-LM-IV hereto.

(7) Every manufacturer, repairer, or dealerlicenced under the Act and these rules shallmaintain such workshop, equipments, toolsand registers, etc., as the case may be, as perthe terms and conditions of the licence.

(8) Every repairer licenced under the Actand these rules shall furnish a security depositof rupees two hundred for each licence to theGovernment.

(9) Every licence issued or renewed underthis Act shall be displayed in a conspicuousplace in the premises where the licenseecarries on business.

(10) A licence issued or renewed under thisAct shall not be salable nor transferable.

10. Suspension and cancellation of licencegranted.— (1) The Controller or such otherOfficer authorized by him in this behalf may, ifhe has any reasonable cause to believe thatthe holder of any licence issued, renewed orcontinued under this Act has made anystatement in, or in relation to any applicationfor the issue, renewal or continuance of thelicence, which is incorrect or false in anymaterial particular or has contravened anyprovision of the Act or any rule or order madethereunder, suspend such licence, pending thecompletion of any inquiry against the holderof such licence:

Provided that no such licence shall besuspended unless the holder thereof has beengiven a reasonable opportunity of being heardin the matter:

Provided further that where the inquiryreferred to in this sub-section is not completedwithin a period of three months from the dateof suspension of a licence, such suspensionshall, on the expiry of the period aforesaid,stand vacated.

(2) The Controller or such other authorizedOfficer if he is satisfied, after making suchinquiry as he may think fit, that the holder of alicence has made a false or incorrect statementof the nature referred to in sub-rule (1), or hascontravened any law or order referred to inthat sub-section, cancel such licence:

Provided that no such licence shall becancelled unless the holder thereof has beengiven a reasonable opportunity of being heardin the matter.

(3) Every person whose licence has beensuspended shall, immediately after suchsuspension, stop functioning as such licenceeand shall not resume business as such licenceeuntil the order of such suspension stands, orhas been, vacated.

(4) Every licencee whose licence has beensuspended or cancelled shall, after suchsuspension or cancellation, as the case maybe, surrender such licence to the authority bywhom such licence was issued.

(5) Every licencee whose licence has beencancelled shall, within a period of thirty daysfrom the date of such cancellation, or withinsuch further period not exceeding threemonths from such date as the Controller orsuch other Authorized Officer on sufficientcause being shown allow, dispose of theweights or measures which were in hispossession, custody or control on the date ofsuch cancellation and in the event of his failureto do so, the Controller or such otherAuthorized Officer may seize and dispose of



1937

the same and distribute the proceeds thereofin such manner as may be prescribed.

11. Records to be maintained bymanufacturers, etc.— Every manufacturer orrepairer of, or dealer in weights or measureslicenced under the Act and these rules shallmaintain records and registers in FORM-LM--VA, FORM-LM-VB, FORM-LM-VC, hereto,respectively, and also submit such periodicalreport/returns as may be specified in thatbehalf.

12. Periodical interval for the verification ofweights or measures.— Periodical interval forthe verification of weights and measures asshall be specified in the Legal Metrology(General) Rules, 2011.

13. Verification and inspection of weights ormeasures.— (1) Every person using anyweight or measure in any transaction or forprotection shall present such weight ormeasure for verification or re-verification, atthe Office of the Legal Metrology Officer or atsuch other place as the Legal Metrology Officermay specify in this behalf on or before the dateon which the verification falls due:

Provided that where any weight or measureis such that it cannot, or should not, be movedfrom it’s location, the person using such weightor measure shall report to the Legal MetrologyOfficer at least thirty days in advance of thedate on which the verification falls due.

(2) Where any weight or measure is suchthat it cannot, or should not, be moved fromit’s location, Legal Metrology Officer shalltake necessary steps for the verification ofsuch weight or measure at the place of it’slocation.

(3) For the verification of weight or measurereferred to in sub-rule (2), the user shallprovide such facilities as may be specified bythe Controller.

(4) Every weight or measure presented forverification shall be complete in itself.

(5) Every weight or measure shall beverified in a clean condition, and if necessary,the Legal Metrology Officer shall require theowner or user to make necessary arrangementfor the purpose.

(6) A Legal Metrology Officer may visit, asfrequently as possible and during theperiodical interval as referred to in rule 12,every premises within the local limits of hisjurisdiction to inspect and test any weight ormeasure which is being or is intended or likelyto be used in any transaction or for protection.

(7) The Legal Metrology Officer shallobliterate the stamp on any weightor measure, if it is found during inspectionthat,—

(a) any weight or measure which beingdue for re-verification has not beensubmitted for such re-verification;

(b) any weight or measure which doesnot conform to the standards establishedby or under the Act:

Provided that where the Legal MetrologyOfficer is of opinion that the defect or error insuch weight or measure is not such as torequire immediate obliteration of the stamp,he shall inform the user about the defect orerror found in the weight or measure and callupon user to remove the defect or error withinsuch time, not exceeding eight days andshall,—

(i) if user fails to remove the defect orerror within that period, obliterate thestamp, or

(ii) if the defect or error is so removedas to make the weight or measureconform to the standards established byor under the Act, verify and stamp suchweight or measure.

Explanation.— The obliteration of the stampon any weight or measure shall not take awayor abridge the power of the Legal Metrology


1938

Officer to seize such weight or measure inaccordance with the provisions of the Act.

14. Stamping of weights or measures.— (1)The Legal Metrology Officer shall stamp everyweight or measure, if af ter testing andverification, he is satisfied that such weight ormeasure conforms to the standards establishedby or under the Act, with a stamp of uniformdesign, issued by the Controller, which shallindicate the number allotted for administrativepurpose to the Legal Metrology Officer bywhom it is stamped:

Provided that if by reason of the size or natureof any weight or measure it is not desirable orpracticable to put a stamp thereon, the LegalMetrology Officer shall take such action as maybe directed by the Controller by a general or aspecial order in writing.

(2) The Legal Metrology Officer shall alsomark the year and it’s quarter of stamping onevery verified weight or measure except whenthe size or nature of such weight or measuremakes it impracticable.

Explanation.— A year shall be deemed toconsist of four quarters of which first quartershall be of the months of January, Februaryand March, which shall be marked as A;second quarter shall be of the months of April,May and June, which shall be marked as B;third quarter shall be of the months of July,August and September, which shall be markedas C; and fourth quarter shall be of the monthsof October, November and December, whichshall be marked as D.

(3) On completion of verification andstamping, the Legal Metrology Officershall issue a Certificate of Verification inFORM-LM-VI hereto.

(4) Where a Certificate of Verification is lostor destroyed, the holder of the Certificate ofVerification shall forthwith apply to the LegalMetrology Officer who had issued theCertificate, for the issue of a duplicateCertificate of Verification. Every such

application for the issue of a duplicateCertificate shall be accompanied by a fee ofRupees ten.

(5) On receipt of an application undersub-rule (4), the Legal Metrology Officer shallissue to the applicant a duplicate copy ofthe Certificate of Verification marked‘DUPLICATE’.

15. Fee for verification.— (1) Fees payable forverification and stamping of weight or measureat the Office or Camp Office of the LegalMetrology Officer shall be as specified inSchedule III hereto.

(2) If, at the request of the user of weight ormeasure, verification is done at any premisesother than the Office or Camp Office of theLegal Metrology Officer, an additional fee shallbe charged at half the rate specified in theSchedule III hereto and the user of the weightor measure shall pay the expenses incurredby the Legal Metrology Officer for visiting thepremises, including the cost of transportingand handling the Working Standard and otherequipment subject to a minimum of RupeesOne hundred:

Provided that no additional fee shall becharged for verification and stamping ofweights and measures in situ of,—

(i) vehicle tanks for petroleum productsand other liquids, Meter for Liquids otherthan Water (Fuel Dispenser, LiquidPetroleum Gas, Milk Dispensers),Compressed Natural Gas Dispensers, Non--automatic Weighing Instruments likeWeighbridges, Platform Machines, CraneScale, Automatic Gravimetric FillingInstruments, Automatic Rail-weighbridge,Discontinuous Totalizing AutomaticWeighing Instruments, and such otherweight or measure which cannot, andshould not be moved from it’s location;

(ii) weight or measure in the premises ofmanufacturer or dealer of such weight ormeasure.



1939

(3) If a weight or measure is presented tothe Legal Metrology Officer for re-verificationafter expiry of the validity of the stamp, anadditional fee at half the rates specified inSchedule III hereto shall be payable for everyquarter of the year or part thereof.

(4) Full fee shall be payable for re-stampingany weight or measure held in stock withmanufacturer or dealer within the periodspecified in rule 12 from the date on which itwas last stamped, provided that the originalstamp was not obliterated.

(5) A weight or measure which onverification or inspection is found to beincorrect shall be returned to the personconcerned for adjustment informing him, in aproforma specified by the Controller, of thedefects found in the weight or measure, andcalling upon him to remove the defects withina period not exceeding seven days. When thenecessary adjustment has been carried out,such weight or measure shall be verified onpayment of the fees specified in Schedule IIIand if found correct shall be stamped.

16. Collection of fees and deposit into theTreasury.— (1) Before commencing the workof verification or re-verification, the LegalMetrology Officer shall inform the personconcerned of the fees payable by him and shallreceive the same in the manner as authorizedby the Controller and issue a receipt on theform approved by the Controller, one copy ofsuch receipt being kept for record:

Provided that the fees payable by aDepartment of the Central or State Governmentunder these rules may be realized in suchmanner as may be directed by the Controller.

(2) The Legal Metrology Officer shallmaintain a register, in the form approved bythe Controller, which shall be written up fromday-to-day and shall show the amount of feesand other charges collected during the day.

(3) All payment received by the LegalMetrology Officer during the week shall be

paid into the Government treasury under theappropriate “Head of Account” on such datesor days as may be specified by the Controllerfrom time to time, and a receipt thereof beobtained and an intimation to that effect besent to the Controller or other Officerauthorized by him in this behalf.

17. Disposal of seized weights, measures,etc.— (1) Any un-verified weight or measureshall be returned to the person from whomsuch weight or measure was seized if thatperson gets the same verified and stamped,within fifteen days of the return of seizedgoods on payment of the prescribed fee,including the additional fee, payable forundertaking re-verification after the expiry ofthe validity of the stamp.

(2) Any weight or measure or document orthing or goods seized and detained undersection 15 of the Act, which is the subjectmatter of proceedings in a Court shall beproduced by the Legal Metrology Officerbefore the Court and after conclusion of theproceedings, the Legal Metrology Officer shalltake possession of the same and deal with it inaccordance with the orders of the Court:

Provided that in the absence of the ordersof the Court, weight or measure or documentor thing or goods shall be dealt with as theController may, by special order, direct and thematerial thereof shall be sold and the proceedscredited to the Government treasury.

(3) If any goods seized under section 15 ofthe Act are subject to speedy or natural decay,the Legal Metrology Officer shall have thegoods weighed or measured on a verifiedweighing or measuring instrument availablewith him or at the nearest place from the placewhere such goods are seized and enter theactual weight or measure of the goods in aform specified by the Controller for thispurpose, and shall obtain the signature of thetrader or his agent or such other person whohas committed the offence and return thegoods in question to the trader or thepurchaser, as the case may be:


1940

Provided that if the trader or his agent orany other person who has committed theoffence refuses to sign the form, the LegalMetrology Officer shall obtain the signaturesof not less than two persons present at the timeof such refusal by the trader or his agent orsuch other person. In the case if goods arereturned to the trader, he shall give anundertaking stating that he shall not sell thedefective goods without rectifying the defectsthereon.

(4) Where the goods seized under sub--section (1) of section 15 of the Act arecontained in a package and the package isfalse or does not conform to the provisions ofthe Act or any rules made thereunder andthe goods in such package are subject tospeedy or natural decay, the Legal MetrologyOfficer may dispose of the goods in suchpackage in accordance with the provisions ofsub-rule (3):

Provided that the Controller shall be the finalauthority to decide whether the goods seizedand detained are subject to speedy or naturaldecay.

(5) Where the goods seized under sub--section (1) of section 15 of the Act are notsubject to speedy or natural decay, the LegalMetrology Officer may retain the package forthe purpose of prosecution under the Act aftergiving the trader or his agent or the otherperson who has committed the offence a noticeof such seizure.

(6) The goods referred under sub-rules (4)

and (5), which are not the subject matter of

proceedings in a Court, shall, after the expiry

of sixty days from it’s seizure, be so dealt with

as the Controller may by special order direct.

18. Validity of weights or measures dulystamped.— (1) A weight or measure which is,or is deemed to be, duly verified and stampedunder these rules shall be deemed to conformto the Standards established by or under theAct at every place within the State of Goa inwhich it is stamped unless it is found on

inspection or verification that such weight ormeasure has ceased to conform to theStandards established by or under the Act.

(2) No weight or measure which is, or isdeemed to be, duly verified and stamped underthis Act shall require to be re-stamped merelyby reason of the fact that it is being used atany place within the State of Goa other thanthe place at which it was originally verifiedand stamped:

Provided that where a verified weight ormeasure, installed at one place is dismantledand re-installed at a different place, suchweight or measure shall not be put into useunless it has been duly re-verified and stamped,notwithstanding that periodical re-verificationof such weight or measure has not becomedue.

(3) Where a verified weight or measure hasbeen repaired, whether by a licenced repaireror by the person owning and possessing thesame, such weight or measure shall not be putinto use unless it has been duly re-verifiedand stamped, notwithstanding that periodicalre-verification of such weight or measure hasnot become due.

19. Qualifications of Legal MetrologyOfficer.— Qualifications of Legal MetrologyOfficer shall be as specified in the LegalMetrology (General) Rules, 2011.

20. Provision of supply of Working//Secondary Standards, equipment, etc. to theLegal Metrology Officer.— (1) Every LegalMetrology Officer shall be provided withWorking/Secondary Standard Weights,Working/Secondary Standard Balances, andsuch other equipments including weighingand measuring devices as may be approvedby the Controller from time to time.

(2) Every Legal Metrology Officer shall beprovided with such dies, punches, paper seal//sticker and such other equipment as may benecessary for affixing the verification stamp,the design and number of which are to beapproved by the Controller.



1941

(3) Every Legal Metrology Officer shall beprovided with punches of suitable sizes ofeight-pointed star as shown below forobliterating stamps.

21. Provisions relating to use of weights,measures, etc.— (1) Every person using abeam scale in any transaction in his premisesshall suspend the same to a stand or to a chainby a hook:

Provided that this sub-rule shall not applyto itinerant vendors.

(2) Every weight or measure shall be usedin a clean condition and in proper lightingarrangement.

(3) Any weight or measure, which has beenverified and stamped in situ, shall not bedismantled and removed from it’s originalsite without prior intimation to the Controlleror other person authorized by him in thisbehalf.

(4) To ensure a proper check of the accuracy

of a weighing instrument, the user shall keep

at the site of each weighing instrument duly

verified and stamped weights equal to one-

-tenth of the capacity of the instrument or one

tonne and consumer can also check the

accuracy of the weighing instrument:

Provided that the Controller may specify the

total number of verified and stamped weights

to be maintained in trade premises where the

number of weighing instruments are more

than one.

(5) To ensure proper delivery of the petrol

and diesel at pumps, the retail dealer of the

pump shall keep a verified 5 litres and 10 litres

capacity measure in his premises and check

the out put from the pump every day to ensure

it’s correct delivery. In case of any short

delivery the dealer shall stop the delivery

through the pump immediately and inform the

Legal Metrology Officer concerned to

recalibrate the pump.

22. Certificate of Verification to beExhibited.— The person to whom a Certificateof Verification is issued shall exhibit the samein a conspicuous place in the premises wherethe weights, measures or weighing ormeasuring instruments to which theCertificate relates are used:

Provided that in the case of itinerantvendor, the Certificate shall be kept with theperson:

Provided further that in the case of vehicletank, the Certificate of Verification shall be keptwith the vehicle.

23. Penalty for contravention of rules.—Whoever contravenes any provision of theserules, for the contravention of which nopunishment has been separately provided inthe Act, shall be punished with fine, whichmay extend to five thousand rupees.

24. Form of appeal.— (1) Every appeal

under the Act and these rules shall be

preferred in FORM-LM-VII hereto and shall be

accompanied by a copy of the order appealed

against.

(2) An appeal to the Government shall be

accompanied by fee of Rs. 500/- (Rupees Five

hundred only) and an appeal to the Controller

shall be accompanied by fee of Rs. 200/-

(Rupees Two hundred only) paid either by

cash or by affixing Court fee stamp of the

said value.

25. Fee for compounding of offences.— The

fee for compounding of offences committed

under the Act shall be as specified in Schedule

IV hereto.


N. M. Naik, Controller and ex officio UnderSecretary (Legal Metrology).

Panaji, 1st March, 2011.


1942

SCHEDULE – I

(See rule 8)

The commodities specified in column (2) of table below may be sold by weight, measure ornumber as shown by corresponding entry in column (3)

TABLE

Sr. Commodity Whether declaration to be expressed in terms ofNo. weight, measure or number or two or more of them

(1) (2) (3)

(1) Aerosol products weight

(2) Acids in liquid form weight or volume

(3) Compressed or liquefied weight and equivalent volume at stated temperature

gas (but not liquefied and pressure

petroleum gas)

(4) Butter (including peanut weight

butter), cheese, curd, ghee

(5) Electric cables length or weight

(6) Electric wire length or weight

(7) Fencing wire length or weight

(8) Hair oil (un-perfumed) weight or volume

(9) Fruits and vegetables number or weight

(10) Furnace oil weight or volume

(11) Linseed oil and other vegetable oils weight or volume

(12) Heavy residual fuel oil weight

(13) Industrial diesel fuel volume

(14) Honey, malt extract, golden weight

syrup treacle

(15) Ice cream and other similar frozen weight or volume

products

(16) Liquid chemicals weight or volume

(17) Liquid petroleum gas weight

(18) Nails, wood screws number or weight

(19) Paint (other than paste paints or solid volume

paint), varnish and varnish stairs, enamels

(20) Papad number and weight

(21) Paste paint, solid paint weight

(22) Rassgulla, Gulabjamun and other weight

sweet preparations

(23) Ready made garments number and size

(24) Sauce of all kinds weight

(25) Tyres and tubes number

(26) Yarn weight or length of yarn



1943

FORM-LM-I A

[See rule 9 (1)]

(Application form for licence as manufacturer of weights or measures under theLegal Metrology Act, 2009)

To,

To be filled by the Comments of the applicant inspection officer

(1) (2) (3)

(1) Name of the manufacturing concern for which licence ....................... ....................................is desired

(2) Complete address of the concern. Whether premises ....................... .....................................is/are owned/rented/taken on lease/leave licence, dulysupported by documents

(3) Date of Establishment of workshop/factory ....................... .....................................

(4) Name(s) and address(es) along with their father’s/ ...................... ...................................../husband’s name of proprietor(s) and/or Partners andManaging Director(s) in the case of limited company

(5) The date and current registration number of factory/ ........................ ...................................../shop/establishment/Municipal Trade licence

(6) Nature of manufacturing activities at present ...................... .....................................

(7) The type of weights and measures proposed to be ....................... ....................................manufactured viz.: (i) Weights (ii) Measures(iii) Weighing Instruments(iv) Measuring Instruments with details in each case.

(8) The number of persons employed/proposed to be employed ...................... ......................................(i) Skilled

(ii) Semi-skilled(iii) Unskilled(iv) Specialist trained in the line

(9) The monogram or trademark intended to be imprinted ...................... ......................................on weights and measures to be manufactured

(10) Details of machinery, tools accessories, owned and ...................... ......................................used for manufacturing weights, measures etc.

(11) Details of foundry/workshop facilities arranged ........................ ......................................Whether ownership, long term lease etc.

(12) Facilities of steel casting and hardness testing of ...................... ......................................vital parts etc. or other means

(13) Availability of electric energy ....................... .....................................


1944

(1) (2) (3)

(14) Details of loan received from Government or Financial ...................... ......................................Institution. If so, give details

(15) Name of bankers, if any ...................... .......................................

(16) VAT/Sales Tax Registration Number/CST Number/ ...................... ......................................./Professional Tax Registration Number/IT Number

(17) Have you applied previously for a manufacturer’s ...................... .......................................licence? If so, when and with what results?

(18) (a) Whether the item(s) proposed to be ...................... .......................................manufactured will be sold within the State oroutside the State or both

(b) Details of Model Approval received fromGovernment of India

(c) When can you produce for inspection samples ofyour products for which licence is desired?

To be certified by the applicant(s)

Certified that I/We have read the Legal Metrology Act, 2009 and the Goa Legal Metrology Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issuedthereunder.

I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by theLicencing Authority.

All the information furnished above is true to the best of my/our knowledge.

Place: ...................................

Date: Signature and Designation__________

To be filled in by Departmental Officer of the State Government

Date of Receipt of Application:

Serial Number of Application:

Date of Inspection:

Recommendation of Inspecting Officer:

Place: ...................................

Date: Signature and Designation of Inspecting Officer

___________

Final orders of Licensing Authority

Licence granted/refused:

Licence Number:

Valid till:

Place: ...................................

Date: Signature and Designation



1945

FORM-LM-IB

[See rule 9 (1)]

(Application form for Licence as Repairer of Weights or Measures under theLegal Metrology Act, 2009)

To,

To be filled by the Comments of the applicant inspecting officer

(1) (2) (3)

(1) Name of the concern seeking the licence ....................... ..................................

(2) Complete address of the workshop ....................... ..................................

(3) (a) Whether premises are owned/rented/taken on ....................... ..................................lease duly supported by documents(b) Date of establishment

(4) Name(s) and address(es) alongwith their father’s/ ......................... ................................../husband’s name of proprietor(s) and/or Partners andManaging Director(s) in the case of limited company

(5) Number and date of shop/establishment/current .......................... ..................................Municipal Trade Licence

(6) Professional Tax/IT Tax registration number etc., if any .......................... . ………...................

(7) The type of weights and measures proposed to be repaired ........................... . ………...................

(8) Area in which you wish to operate .......................... ..................................

(9) Previous experience in the line .......................... ..................................

(10) Number of skilled staff employed or proposed to be ........................... ..................................employed:

(i) Skilled

(ii) Semi-skilled

(iii) Unskilled

(iv) Employees trained in the line

(11) Details of machinery/tools/accessories available ........................... ..................................

(12) Availability of electric energy .......................... ..................................

(13) Have you got sufficient stock of loan/test weights etc.? ........................... .................................. Give details

(14) Have you applied previously for a repairer’s licence? ........................... ..................................If so, when and with what results?


1946


Certified that I/We have read the Legal Metrology Act, 2009 and the Goa Legal Metrology Rules, 2011and agree to abide by the same and also the administrative orders and instructions issued or to be issuedthereunder.

I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by theLicensing Authority.


Place: ...................................Date: Signature and Designation

___________


Date of Receipt of Application:Serial Number of Application:Date of Inspection:Recommendation of Inspecting Officer:

Place: ...................................Date: Signature and Designation of Inspecting Officer

__________

Final orders of Licencing Authority

Licence granted/refused:Licence Number:Valid till:


___________

FORM-LM-IC

[See rule 9 (1)]

(Application form for Licence as dealer in Weights or Measures under the Legal Metrology Act, 2009)

To,


(1) (2) (3)

(1) Name of the establishment/shop/person seeking the ............................ ..................................licence

(2) Complete address of the establishment, etc. ........................... ..................................



1947

(1) (2) (3)

(3) Date of establishment .......................... ...............................

(4) Name(s) and address (es) of proprietors and/or partners ......................... ...............................and Managing Director(s) in the case of limited company

(5) Number and date of Registration of current .......................... ..............................shop/establishment/Municipal Trade licence

(6) Categories of weights and measures sold/proposed .......................... ...............................to be sold at present

(7) Registration Number of VAT/CST/Sales Tax/Professional .......................... .. ……....................Tax/Income Tax

(8) Do you intend to import weights, etc. from places ........................... ................................outside the State/Country? If so, indicate sources ofsupply (Give details of manufacturer’s trademark//monogram and his licence number) and provide

(a) Registration of importer of Weights or Measures, if any

(b) Approval of model imported into India by Central Government

(9) Have you applied previously for a dealer’s licence, ......................... ................................ either in this State or elsewhere? If so, give details?



I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by theLicensing Authority.



______________


Date of Receipt of Application:

Serial Number of Application:

Date of Inspection:

Recommendation of Inspecting Officer:

Place: ...................................Date: Signature and Designation of Inspecting Officer

___________

Final orders of Licensing Authority

Licence granted/refused:Licence Number:Valid till:



1948

FORM-LM-IIA

[See rule 9 (2)]

(Application form for renewal of Licence as Manufacturer of Weights or Measures under theLegal Metrology Act, 2009)

To,


(1) (2) (3)

(1) Name and complete address of the manufacturing ........................ ..................................concern for which renewal of licence is desired

(2) Manufacturing Licence No. ....................... ..................................

(3) Name(s) and address(es) alongwith their father’s/ ...................... ................................../husband’s name of proprietor(s) and/or Partners andManaging Director(s) in the case of limited company

(4) (a) Type of weights and measures which are ....................... .................................. manufactured as per licence granted(b) Do you propose any change ....................... ..................................

(5) The monogram or trademarks used on weights and ....................... ..................................measures manufactured by you

(6) Details of workshop facilities available ......................... ..................................

(7) Details of production and sales in the last 5 years .... ..................... ..................................

(8) Number and date of Registration of shop/ .......................... ................................../establishment

(9) Registration Number of VAT/Sales Tax/CST/Professional ......................... ………................... Tax/Income Tax

___________


Certified that I/We have read the Legal Metrology Act, 2009 and the Goa Legal Metrology Rules, 2011and agree to abide by the same and also the administrative orders and instructions issued or to beissued thereunder.

I/We have deposited the Scheduled licence fees of Rs. ........................... (Rupees .......................................) to the

Sub-Treasury/Bank on ...................................................... and the original challan is enclosed.


Place: ...................................




1949

FORM-LM-IIB

[See rule 9 (2)]

(Application form for Renewal of Licence as Repairer of Weights or Measures under theLegal Metrology Act, 2009)

To,


(1) (2) (3)

(1) Name and complete address of the repairing concern/ ......................... ................................../person seeking renewal of the licence

(2) Repairer’s Licence Number ......................... ..................................(3) Name(s) and address(es) alongwith their father’s/ ......................... ..................................

/husband’s name of proprietor(s) and/or Partners andManaging Director(s) in the case of limited company

(4) Registration Number and date of current shop/ ........................ ................................../establishment/Municipal Trade Licence

(5) Registration Number of VAT/Sales Tax/CST/Professional .. ...................... ..…...........................Tax/Income Tax

(6) (a) The Type of weights and measures repaired ....................... .................................. as per licence granted(b) Do you propose any change .......................... ..................................

(7) Area in which you are operating .......................... ...................................(8) Have you got sufficient stock of loan/test weights, etc.? ........................... ...................................(9) Please give details with particulars of stamping .......................... ....................................

_____________



I/We have deposited the Scheduled licence fees of Rs. ........................... (Rupees .......................................) to theSub-Treasury/Bank on ...................................................... and the original challan is enclosed.


Place: ...................................


____________

FORM-LM-IIC

[See rule 9 (2)]

(Application form for Renewal of Licence as Dealer in Weights or Measures under theLegal Metrology Act, 2009)

To,


(1) (2) (3)

(1) Name of the establishment/shop/person seeking the ......................... ..................................renewal of licence


1950

(1) (2) (3)

(2) Dealer’s Licence Number ......................... ..................................(3) Date of establishment ......................... ..................................(4) Name(s) and address(es) alongwith their father’s/ ......................... ..................................

/husband’s name of proprietor(s) and/or Partners andManaging Director(s) in the case of limited company

(5) Registration Number and date of shop/establishment/ ......................... ................................../current Municipal Trade Licence

(6) Categories of weights and measures sold at present ......................... ..................................(7) Registration Number of VAT/CST/Sales Tax/Professional ........................ …….........................

Tax/Income Tax(8) Are you intending to import weights and measures etc. ........................ .………....................

from places outside the State/Country? If so, indicatesources of supply from the State(s)/Country(ies)(Give details of manufacturer’s trademark/monogram

and his licence number)



I/We have deposited the Scheduled licence fees of Rs. ........................... (Rupees .......................................) to theSub-Treasury/Bank on ...................................................... and the original challan is enclosed.


Place: ..................................

Date: Signature and Designation.

_____________

FORM-LM-IIIA

[See rule 9 (3)]

Government of Goa

OFFICE OF THE CONTROLLER OF LEGAL METROLOGY

Licence to manufacture weights or measures, weighing or measuring instruments

Licence No… ………. Year ………………..

(1) The Controller of Legal Metrology hereby grants to ………………...................................................…………(Name and address of party or parties) a licence to manufacture the following:–(Include details of the weights, measures, weighing instruments or measuring instruments that arelicenced to be manufactured by the party).

(2) The licence is valid for the party named above in respect of his workshop located at …….......……….

(3) This licence is valid from ………...............……… to …….............………..

(4) The manufacturer shall comply with the conditions noted below. If he fails to comply with any one of these, his licence is liable to be cancelled.



1951

(5) The trade mark, monogram being used by the manufacturer is as under:—

(Seal) …………………… (Signature)

Controller of Legal Metrology Government of Goa

Date ………………..

Place ………………..

Note: In the case of firm, its name with the names of all persons having interest in the business should be given in

paragraph 1.

Conditions of Licence

(1) The person in whose favour this licence is issued shall,—

(a) comply with all the relevant provisions of the Legal Metrology Act, 2009 and Rules framedthereunder for the time being in force;

(b) not encourage or countenance any infringement of the provisions of the Act or the Rules asamended from time to time;

(c) exhibit this licence in some conspicuous part of the premises to which it relates;

(d) comply with any general or special directions that may be given by the Controller of LegalMetrology;

(e) surrender the licence in the event of closure of business and/or cancellation of Licence;

(f) present the weights, measures, weighing or measuring instruments, as the case may be,manufactured and meant for use within the State, to the Legal Metrology Officer for verificationand stamping before sale;

(g) submit the application for renewal of this licence as required under the rules within thirty daysbefore the date of its expiry.

(2) Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette,be binding on the persons to whom the licence has been granted.

Renewal entries

Current No…………….. Date …….........….Renewed for

Seal Controllerof Legal Metrology












1952

FORM-LM-IIIB

[See rule 9 (3)]

Government of Goa


Licence to repair Weights or Measures, Weighing Instruments or Measuring Instruments

Licence No ………. Year …...................……

(1) The Controller of Legal Metrology hereby grants to …….................................................………………………(Name and address of Party or Parties) a licence to repair the following:-

(Include details of the types of weights, measures, weighing instruments or measuring instrumentsthat are licenced to be repaired by the party)

(2) The licence is valid for the party named above in respect of his workshop located at …….......……….

(3) This licence is valid from ………….........…….. to ….. ……............………

(4) The repairer shall comply with the conditions noted below. If he fails to comply with any one, hislicence is liable to be cancelled.

(5) The party is licenced to repair weights, measures, weighing and measuring instruments in theareas mentioned below—

(Signature) Controller of Legal Metrology

(Seal) ------------------------------Date…………………….

Place………………..….

Note: In the case of firm, its name with the names of all persons having any interest in the business should be given in

paragraph (1).


(1) The person in whose favour this licence is issued shall,—(a) comply with all the relevant provisions of the Act and Rules for the time being in force;(b) not encourage or countenance any infringement of the provisions of the Act or the Rules for the

time being in force;(c) exhibit this licence in some conspicuous part of the premises to which it relates;(d) comply with any general or special directions that may be given by the Controller of Legal Metrology;(e) surrender the licence in the event of closure of business and/or cancellation of Licence;(f) (i) present the weights, measures, weighing or measuring instruments, as the case may be, duly

repaired to the Legal Metrology Officer for undertaking verification and stamping beforedelivery to the user.

(ii) in the case of weights, measures, weighing or measuring in struments, if they, are serviced//repaired before the date on which the verification falls due and where, in the process and theverification stamp of the Legal Metrology Officer is defaced, removed or broken, they shall bepresented duly repaired to the Legal Metrology Officer for re-verification and stamping beforedelivery to the user.

(g) submit the application for renewal of this licence as required under the rules within thirty daysbefore the date of its expiry.

(2) Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, bebinding on the persons to whom the licence has been granted.



1953

Renewal Entries

Current No…………….. Date ……................….Renewed for




___________

FORM-LM-IIIC

[See rule 9 (3)]

Government of Goa


Licence to a dealer in weights or measures, weighing instruments or measuring instruments

Licence No. …....................….. Year ……...................……..

(1) The Controller of Legal Metrology hereby grants to …………..............................................…………………

(Name and address of party or parties) a licence to deal in the following (Indicate details of the typesof weights or measures, weights or measuring instruments that are licenced to be dealt with by

party)

(2) The licence is valid for the party named above in respect of his premises located at ...............................

(3) This licence is valid from …….......................………. to ……...........................……….

(4) The dealer shall comply with the conditions noted below. If he fails to comply with any one of those,his licence is liable to be cancelled.

(Seal) (Signature)Date ………………. Controller of Legal MetrologyPlace………………. ............................................................

Note: In the case of firm its name with the names of all persons having any interest in the business should be given inparagraph (1).


(1) The person in whose favour this licence is issued shall,—(a) comply with all the relevant provisions of the Act and Rules for the time being in force;(b) not encourage or countenance any infringement of the provisions of the Act or the Rules for the

time being in force;(c) exhibit this licence in some conspicuous part of the premises to which it relates;






1954

(d) comply with any general or special directions that may be given by the Controller of Legal Metrology;(e) surrender the licence in the event of closure of business and/or cancellation of Licence;(f) submit the application for renewal of this licence as required under the rules within thirty days

before the date of expiry of licence;(g) Not sell or offer, expose or possess for sale, any non-standard weight or measure.

(2) Every condition prescribed after the issue of this licence shall, if notified in the Official Gazette, bebinding on the persons to whom the licence has been granted.

Renewal Entries







_____________

SCHEDULE – II

[See rule - 9 (4) & (5)]

Licencing fee and renewal fee for manufacturer, repairer or dealer in weights or measures

Sr. No. Subject Fee

(1) (2) (3)

(1) Issue of licence/renewal of licence to,—

(i) Manufacturer Rs. 500/- per year.(ii) Repairer Rs. 100/- per year.(iii) Dealer Rs. 100/- per year.

(2) Alteration of Licence Rs. 50/-

(3) Issue of Duplicate Licence Rs. 10/-

___________

FORM-LM-IV

[See rule 9 (6)]

Register of Licenced manufacturers/Repairers/Dealers of weights, measures,weighing/measuring instruments

Office of ....................................









1955

Note: Column (4) does not apply to dealers, column (6) does not apply to repairers and dealers.

___________

FORM-LM-VA

[See rule 11]

Register to be maintained by the manufacturers of weights and measures

(1) Name and address of the manufacturer ………………………………...………...

(2) Description of the weight or measure ……………………………….....………….

(3) (i) No. of the manufacturing licence …………………………………………… (ii) Date on which the licence was issued ………………………………………(iii) Period of validity of the licence …………………………………...........……..

(4) Particulars of order, if any, suspending or revoking the licence. ……………………………………………………………….........………

____________

FORM-LM-VB

[See rule 11]

Register to be maintained by the repairer in respect of weights and measures

Name and address of the repairer ……………….. Licence No……..............………….

Date of Licensing ………………..

LicenceNumber

1

Date ofissue/

/renewal

2

Name andcomplete

address of themanufacturer//repairer/dealer

3

Placewhere

workshop//factory

issituated

4

Articles to bemanufactured//repaired/sold

5

Trademark//mono-grambeingused

6

Orders regardingcancellation

of licence

7

Resultof

appeal

8

Signatureof

competentauthority

9

Remark

10

Sr. No.

1

Month

2

Unsold stock fromprevious month

3

Quantity manufacturedduring the month

4

Total3+4

5

Sold within the State

No. of itemsold

6

Dispatchvoucher No.

and date

7

Sold outside the State Dispatch voucherNo. and date

10

Total sold(6+9)

11

Balance(5-11)

12

Remarks

13

Name of the State

8

No. of items sold

9


1956

____________

FORM-LM-VC

[See rule 11]

Register to be maintained by dealer in weights and measures

(1) Name and address of the dealer ………………………………………...………...

(2) Description of the weight or measure ……………………………….….………..

(3) (i) Dealer licence No. ………………………………………………….....………...

(ii) Date on which the licence was issued ………………………………………

(iii) Period of validity of licence …………………………………………......…….

(4) Particulars of order, if any, suspending or

revoking the licence ...........................................................................................................

(5) Category of weight or measure ………………………………………......………...(Category A or B)

___________

FORM-LM-VI

[See rule 14 (3)]

Government of Goa

OFFICE OF THE CONTROLLER, LEGAL METROLOGY

Certificate of Verification

Name of Legal Metrology Officer ………………..…………………………………….………

No…………………..

Sr. No.

1

Date

2

Name of the userfrom whom

received

3

Items andtheir Nos.booked for

repair

4

ReceiptNo. anddate ofissue tothe user

5

Amount ofrepairingcharges

6

Amount ofverification

fee

7

Totalamountcharged

8

Date ofreturn tothe user

9

Remarks

10

Sr. No.

1

Month

2

Unsold stock fromthe previous month

3

Brought from withinthe State during the

month

4

Total(3+4+5)

6

Sold within the State

No. of itemssold

7

Dispatchvoucher No.

and date

8

Sold outside the State

11

Total sold(7+9)

12

Balance(6-12)

13

Remarks

149 10

Brought fromoutside the

State duringthe month

5

Name ofthe State

No. of items sold Dispatch voucherNo. and date



1957

I hereby certify that I have this day verified and stamped/rejected the under mentioned weights,measurers, etc.

Belonging to …………………………………. Locality ………………………………

Total Rs. ……....... deposited vide T. receipt/Money receipt No. …..........… dated ....…................................……Repaired by/Used by

………………………. (Signature)Next verification due on …………….. Legal Metrology Officer

Note: In the case of rejected weights, measures, etc., the Legal Metrology Officer shall give separate certificate ofrejection mentioning the reasons of rejection against each item.

__________

SCHEDULE-III

[See rule 15]

Fee payable for verification and stamping of Weights and Measures, Weighingand Measuring Instruments

(1) (a) Bullion Weights:

Denomination Fee per piece (Rs.)(1) (2)

10 kg. 30.005 kg. 20.002 kg. 20.001 kg. 20.00500 g. 15.00200 g. 15.00100 g. 15.0050 g. 15.0020 g. 15.0010 g. 15.005 g. 15.002 g. 15.001g. 15.00

(b) Carat Weights:Denomination Fee per piece (Rs.)

100 g. (500 c) 20.00 40 g. (200 c) 20.00 20 g. (100 c) 20.00 10 g. (50 c) 20.00

Quantity

1

Denomination Weighing instruments

Measuringinstruments

8

VerificationFee

Rs. P.

9

Carriage,conveyance,

adjustingcharges etc.

10

Weights

2

Measures

3

Capacity

4

Class

5

Manufacturer

6

Type

7


1958

(1) (2)

4 g. (20 c) 20.002 g. (10 c) 20.001 g. (5 c) 20.00

400 mg. (2 c) 20.00200 mg. (1 c) 20.00

100 mg. (0.5 c) 20.0040 mg. (0.02 c) 20.0020 mg. (0.01 c) 20.0010 mg. (0.05 c) 20.004 mg. (0.02 c) 20.002 mg. (0.01 c) 20.00

1 mg. (0.005c) 20.00

(c) Cylindrical Knob Type Weights: Denomination Fee per piece (Rs.)

(1) (2)

10 Kg. 20.005 Kg. 20.002 Kg. 15.001 Kg. 10.00

500 g. 5.00200 g. 5.00100 g. 5.0050 g. 5.0020 g. 5.0010 g. 5.005 g. 5.002 g. 5.001g. 5.00

(d) Sheet Metal Weight (other than Bullion)Denomination Fee per piece (Rs.)

(1) (2)

500 mg. 5.00200 mg. 5.00100 mg. 5.0050 mg. 5.0020 mg. 5.0010 mg. 5.005 mg. 5.002 mg. 5.001 mg. 5.00

(e) Iron Hexagonal, Knob Type Weights and Parallelepiped Weights:

Denomination Fee per piece (Rs.)

(1) (2)

50 Kg. 25.0020 Kg. 20.0010 Kg. 20.005 Kg. 20.002 Kg. 15.001 Kg. 10.00

500 g. 5.00200 g. 5.00



1959

(1) (2)

100 g. 5.0050 g. 5.0020 g. 5.0010 g. 5.005 g. 5.002 g. 5.001 g. 5.00

(f) Standard Weights for testing of High Capacity Weighing Machines:

(2) Capacity Measures:


(1) (2)

100 litres and above Rs. 50 for the Ist 100 litre plus Rs. 7 for every additional 100 litre or partthereof subject to maximum of Rs. 5000

50 l. 50.0020 l. 20.0010 l. 20.005 l. 10.002 l. 10.001 l. 10.00

500 ml. 10.00200 ml. 10.00100 ml. 10.0050 ml. 10.0020 ml. 10.0010 ml. 10.005 ml. 10.002 ml. 10.001 ml. 10.00

(3) Length Measures: (a) Non-Flexible –


(1) (2)

2 m. 10.001 m. 10.00

0.5 m. 20.001 m. graduated (at every cm.) 20.00

0.5 m. graduated (at every cm.) 20.00

Denominations Fee corresponding to Max permissible

relative error 0.5/10000 in Rs.

Fee corresponding to Max permissiblerelative error 3.3/10000, 1.7/10000 and

1.0/10000 in Rs.

100 kg. 75.00 50.00200 kg. 150.00 100.00500 kg. 300.00 200.00

1000 kg. 750.00 500.002000 kg. 1500.00 1000.005000 kg. 3000.00 2000.00


1960

(b) Fabric Plastic/Woven/Steel Tapes –

Accuracy Class Fee per metre in (Rs.)

(1) (2)

Class-I 1.00Class-II 0.50Class-III 0.50

(c) Folding Scales –


(1) (2)

1 m. 10.000.5 m. 10.00

(d) Surveying Chain –


(1) (2)

30 m. 100.0020 m. 100.00

(4) Beam Scale Class A & B:


(1) (2)

200 kg. 400.00100 kg. 300.0050 kg. 150.0020 kg. 150.0010 kg. 150.005 kg. 100.002 kg. 100.001 kg. 100.00

500 g. and below 60.00

(5) Beam Scales Class C & D:


(1) (2)

1000 kg. 200.00500 kg. 200.00300 kg. 200.00200 kg. 100.00100 kg. 100.0050 kg. 20.0020 kg. 20.0010 kg. 20.005 kg. 15.002 kg. 15.001 kg. 15.00




1961

(6) Non-Automatic Weighing Instruments - Mechanical (Analogue) Class III & IV:

400 t. 4000.00300 t. 3000.00200 t. 3000.00150 t. 2000.00100 t. 2000.0080 t. 2000.0060 t. 2000.0050 t. 2000.0040 t. 2000.0030 t. 2000.0025 t. 2000.0020 t. 2000.0015 t. 2000.0010 t. 1000.005 t. 500.003 t. 400.002 t. 400.00

1500 kg. 300.001000 kg. 300.00500 kg. 300.00300 kg. 200.00250 kg. 200.00200 kg. 100.00150 kg. 100.00100 kg. 100.0050 kg. 100.0030 kg. 100.0025 kg. 60.0020 kg. 60.0015 kg. 30.0010 kg. 30.005 kg. 30.003 kg. 30.002 kg. 30.001 kg. 15.00


(7) Non-Automatic Weighing Instruments - Electronic Class III & IV:400 t. 4000.00300 t. 3000.00200 t. 3000.00150 t. 2000.00100 t. 2000.0080 t. 2000.0060 t. 2000.0050 t. 2000.0040 t. 2000.0030 t. 2000.0025 t. 2000.0020 t. 2000.0015 t. 2000.0010 t. 1000.005 t. 1000.003 t. 500.002 t. 500.00


1962

1500 kg. 250.001000 kg. 250.00500 kg. 250.00300 kg. 200.00250 kg. 200.00200 kg. 200.00150 kg. 200.00100 kg. 200.0050 kg. 200.0030 kg. 200.0025 kg. 200.0020 kg. 100.0015 kg. 100.0010 kg. 100.005 kg. 100.003 kg. 100.002 kg. 100.001 kg. 100.00

500 g. and below 100.00

(8) Non Automatic Weighing Instruments both Mechanical and Electronics Class I & II:

Capacity Fee (Rs.)

Exceeding 50 t 3000.00Not exceed 50 t but exceed 10 t 2000.00Not exceed 10 t but exceed 1 t 1000.00

Not exceed 1 t but exceed 50 kg 500.00Not exceed 50 kg but exceed 10 kg 250.00

Not exceed 10 kg 200.00

(9) Automatic Weighing Instrument:

Capacity Fee in (Rs.)

Exceeding 100 t 4000.00Not exceeding 100 t but exceeding 50 t 3000.00Not exceeding 50 t but exceeding 10 t 2000.00Not exceeding 10 t but exceeding 1 t 1000.00

Not exceeding 1 t but exceeding 50 kg 500.00Not exceeding 50 kg but exceeding 10 kg 250.00

Not exceeding 10 kg 200.00

(10) Volumetric Measuring Instruments:

(a) Dispensing pumps each pump : Rs. 1000.00 per unit(b) Totalizing counter : Rs. 500.00 per unit(c) Other instruments :

Capacity Fee in Rs.

Exceeding 100 litre Rs. 500 for the 1st 100 litres plus Rs. 250for every additional 100 litres or part thereof

Not exceeding 100 litre but exceeding 50 litre 500.00Not exceeding 50 litre but exceeding 20 litre 250.00

Not exceed 20 litre 200.00



1963

(11) Flow Meters:

Flow rate upto 100 litre/min. Rs. 2000.00Above 100 litre/min upto 500 litre/min. Rs. 3000.00Above 500 litre/min. Rs. 5000.00

(12) Linear Measuring Instruments:Taxi, Auto rickshaw meters Rs. 100.00Other meters Rs. 50 for the Ist 1000 m. or part thereof

plus Rs. 5.00 for every additional 100 m. orpart thereof

(13) Clinical Thermometer Rs. 0.50 per unit

(14) Water Meter Rs. 25.00 per unit

(15) Peg Measure:30 ml 50.0060 ml 50.00

100 ml 50.00

(16) CNG Dispensers: Rs. 1000.00 per unit

(17) LPG Dispensers: Rs. 1000.00 per unit

___________

FORM-LM-VII

[See rule 24]

Form of Appeal against an Order of a Legal Metrology Officer/Controller Legal Metrology:-

(1) Name and address of the appellant

(2) No. and date of order of Legal Metrology Officer/Controller of Legal Metrology against which theappeal is preferred

(3) Whether the appellant desires to be heard in person or through an authorized representative

(4) Grounds of appeal ____________

SCHEDULE-IV

[See rule 25]

Compounding sum for various offences

Sr. No. Section and nature of offence Penal Section Sum of Com-pounding fine

1 2 3 4

1. S. 8(3) Use of weight, measure or numeration other than theStandard weight, measure or numeration 25 Rs. 2500.00

2. S. 8(4) Manufacture of weight or measure not conforming to Standards 27 Rs. 2000.00


1964

1 2 3 4

3. S. 10 Transaction or dealing or contract in respect of goods etc.,by weight, measure or number than prescribed 28 Rs. 1000.00

4. S. 11 Quote or make announcement or issue or exhibit of price list orchanging of price than in accordance with standard unit of weightor measure or numeration. 29 Rs. 1000.00

5. S. 12 Demanding or receiving any article or thing on service in excessor less than the quantity specified by contract or agreement. 30 Rs. 1000.00

6. S. 17 Maintenance of records, registers by manufacturer, dealer orrepairer and production of weight, measure document, register on demand 31 Rs. 500.00

7. S.18(1) Compliance of declaration in respect of pre-packaged commodityby manufacturer/dealer 36(1) Rs. 2500.00

8. S. 18(1) Compliance of net quantity-requirement of pre-packaged commodityby manufacturer 36(2) Rs. 15000.00

9. S. 23 Manufacturer of weight or measure only with licence 45 Rs. 5000.00

10. S. 23 Repair/sale of weight or measure only with licence 46 Rs. 2000.00

11. S. 24 Use of verified weight or measure in transaction or protection 33 Rs. 5000.00

12. S. 33 Sale of weight or measure without verification 33 Rs. 5000.00

13. S. 34 Sale or delivery of commodities by non-standard weight or measure 34 Rs. 2500.00

14. S. 35 Rendering service by non-standard weight or measure 35 Rs. 2500.00

15. S. 47 Tampering with licence 47 Rs. 5000.00

16. S. 53(3) Provision of any rule made under the Act 53(3) Rs. 500.00

——— ———

Department of Personnel___

Order

3/23/93-PER(PF)

Read: Order No. 46011/3/2009-IFS-I(AGMUT)/(6) dated 9-12-2009.Order No. 46011/3/2009-IFS-I(AGMUT)/(65) dated 9-12-2009.Order No. 46011/3/2009-IFS-I(AGMUT)/(69) dated 9-12-2009.Order No. 46011/3/2009-IFS-I(AGMUT)/(7) dated 9-12-2009.Order No. 7/11/2009-PER dated 29-01-2010.

Sanction of Government is hereby accorded for creation of the following supernumeraryposts in the Forest Department, Panaji for the specific period so as to enable the officers todraw the salary on promotion during the period as indicated below as a special case:—



1965

Sr. Name of the post Pay Scale No. of supernumerary posts Duration of the postNo. proposed for creation

1 2 3 4 5

1. Additional Principal Chief HAG Scale of 1 w.e.f. 10-12-2009 (a. n.)Conservator of Forests Rs. 67000/- annual to 28-01-2010

income @ 3%-79000/-

2. Managing Director, HAG Scale of 1 w.e.f. 11-12-2009Goa Forest Development Rs. 67000/- annual to 12-05-2010Corporation, Panaji-Goa, income @ 3%-79000/-in the rank of AdditionalPrincipal Chief Conser-vator of Forests

3. Conservator of Forests PB-3 Rs. 15600- 1 w.e.f. 28-12-2009-39100+GP to 28-01-2010Rs. 6600/-

4. Conservator of Forests PB-3 Rs. 15600- 1 w.e.f. 10-12-2009 (a.n.)-39100+GP to 28-01-2010Rs. 6600/-

Dr. Shashi Kumar, IFS (AGMUT:80), Chief Conservator of Forests was promoted as AdditionalPrincipal Chief Conservator of Forests vide Government of India, Ministry of Environment &Forests, Order No. 46011/3/2009-IFS-I (AGMUT)/(6) dated 9th December, 2009. Dr. ShashiKumar reported for duty in this administration as Additional Principal Chief Conservator ofForests on 10th December, 2009 (a.n.).

Shri Santosh Kumar, IFS (AGMUT:93), Dy. Conservator of Forests was promoted asConservator of Forests, vide Government of India, Ministry of Environment & Forests, OrderNo. 46011/3/2009-IFS-I (AGMUT)/(65) dated 9th December, 2009. Shri Santosh Kumar, reportedfor duty in this administration as Conservator of Forests on 10th December, 2009 (a.n.).

Shri V. Khawlhring, IFS (AGMUT:94) was posted as Conservator of Forests, Goa videGovernment of India, Ministry of Environment & Forests, Order No. 46011/3/2009-IFS-I(AGMUT)/(69) dated 9th December, 2009. Shri V. Khawlhring, reported for duty in thisadministration as Conservator of Forests, Goa on 28th December, 2009 (f.n.).

Besides this, Government of India, Ministry of Environment and Forests, Government ofIndia vide their Order No. 46011/3/2009-IFS-I (AGMUT)/(7) dated 9th December, 2009 haspromoted Shri Richard D’Souza, IFS (AGMUT:80), Chief Conservator of Forests/ManagingDirector, G.F.D.C. as Additional Principal Chief Conservator of Forests in the pay scale of HAG(Rs. 67000-Rs. 79000). Subsequently, Shri Richard D’Souza has reported for duty as AdditionalPrincipal Chief Conservator of Forests and Managing Director, G.F.D.C. on 11th December,2009 (f.n.).

The expenditure shall be debited to the Budget Head: “2406–Forestry and Wildlife,01–Forestry, 001–Direction and Administration, 05–Forest Administration (Non Plan),01–Salaries”.

This issues with the approval of the Administrative Reforms Department and with theconcurrence of the Finance (R&C) Department vide its U.O. No. 1403765/F dated 21-01-2011.


N. P. Singnapurker, Under Secretary (Personnel-II).

Porvorim, 1st March, 2011.


1966

Order

7/8/2002-PER (Part file)

Sanction of Government is hereby accorded for revival of following Group ‘C’ and ‘D’ postsin Goa Public Service Commission, Panaji-Goa.

Sr. Designation of Pay Scale No. of posts Vacant SinceNo. the post recommended by ARD

1 2 3 4 5

1. Junior Assistant Rs. 5200-20200+GP 1900 1 31-07-20082. Senior Assistant Rs. 9300-34800+GP 4200 1 09-06-19943. Stenographer Rs. 5200-20200+GP 2400 1 22-10-1998

Grade II4. Stenographer Rs. 5200-20200+GP 2800 2 16-03-2006

Grade I5. Assistant Rs. 5200-20200+GP 2400 1 20086. Private Secretary Rs. 9300-34800+GP 4200 1 01-10-1998

to Chairman7. Peon Rs. 4440-7440+GP 1300 1 1990

The expenditure on the above posts shall be debited to the Budget Head: “2051–PublicService Commission, 00, 102–State Public Service Commission, 01–State Public ServiceCommission (Charged), 01–Salaries”.

This issues with the approval of the Administrative Reforms Department vide U. O. No.45/F dated 11-01-2011 and concurrence of Finance (R & C) Department vide U. O. No. 1415314dated 27-01-2011.


N. P. Singnapurker, Under Secretary (Personnel-II).


___________

Notification

1/2/2006-PER

In exercise of the powers conferred by the proviso to Article 309 of the Constitution ofIndia, read with section 21 of the General Clauses Act, 1897 (Central Act 10 of 1897), theGovernor of Goa hereby amends the Government of Goa, Goa Medical College, Group ‘C’,Non-Ministerial, Non-Gazetted post, Recruitment Rules, 2008, published vide NotificationNo. 1/2/2006-PER dated 4-8-2008, in the Official Gazette, Series I No. 19 dated 7-8-2008, asfollows, namely:—

1. Short title and commencement.— (1) These rules may be called the Government of Goa,Goa Medical College and Directorate of Health Services, Group ‘C’, Non-Ministerial, Non--Gazetted post, Recruitment Rules, 2008 (First Amendment) Rules, 2009.

(2) They shall be deemed to have come into force on the 7th day of August, 2008.


Yetindra M. Maralkar, Joint Secretary (Personnel).

Porvorim, 30th January, 2009.



1967

Department of Personnel___

Notification

1/10/2005-PER

In exercise of the powers conferred by the

proviso to Article 309 of the Constitution of

India, the Governor of Goa hereby makes the

following rules to regulate the recruitment to

the Goa General Service, Group ‘A’, Gazetted

post, under the Directorate of Health Services,

Government of Goa, namely:—

1. Short title, application and commence-

ment.— (1) These rules may be called the

Government of Goa, Directorate of Health

Services, Group ‘A’, Gazetted post,

Recruitment Rules, 2011.

(2) They shall apply to the post specified in

column (1) of the Schedule to these rules

(hereinafter called as the “said Schedule”).

(3) They shall come into force from the date

of their publication in the Official Gazette.

2. Number, classification and scale of pay.—

The number of posts, classification of the said

post and the scale of pay attached

thereto shall be as specified in columns (2)

to (4) of the said Schedule:

Provided that the Government may vary

the number of posts specified in column (2)

of the said Schedule from time to time subject

to exigencies of work.

3. Method of recruitment, age limit and

other qualifications.— The method of

recruitment to the said post, age limit,

qualifications and other matters connected

therewith shall be as specified in columns

(5) to (13) of the said Schedule.

4. Disqualification.— No person who has

entered into or contracted a marriage with a

person having a spouse living or who, having

a spouse living, has entered into or contracted

a marriage with any person, shall be eligible

for appointment to the service:

Provided that the Government may, if

satisfied that such marriage is permissible

under the personal law applicable to such

person and the other party to the marriage

and that there are other grounds for so doing,

exempt any person from the operation of this

rule.

5. Power to relax.— Where, the

Government is of the opinion that it is

necessary or expedient so to do, it may, by

order, for reasons to be recorded in writing,

and in consultation with the Goa Public

Service Commission, relax any of the

provisions of these rules with respect to any

class or category of persons.

6. Saving.— Nothing in these rules shall affect

reservation, relaxation of age limit and other

concessions required to be provided for

Scheduled Castes and other special categories

of persons in accordance with the orders issued

by the Government from time to time in that

regard.

These rules are issued in consultation with

the Goa Public Service Commission conveyed

vide its letter No. COM/II/13/24(1)/2011/4347

dated 24-02-2011.

By order and in the name of the

Governor of Goa.

Yetindra M. Maralkar, Joint Secretary

(Personnel).



1968

SC

HE

DU

LE

Nam

e//D

esig

-na

tion

of post

1

2

3

4

5

6

6

(a)

7

8

9

1

0

1

1

1

2

1

3

Whe

ther

sele

c-ti

onpo

st

orno

n--s

elec

-ti

onpo

st

Age

limit

for

dire

ctre

crui

ts

Peri

odof

prob

a-tio

n, i

fan

y

Met

hod

ofre

crui

tmen

t,w

heth

er b

y di

rect

recr

uitm

ent

orby

pro

mot

ion

or b

y de

puta

tion/

/tran

sfer

/con

trac

tan

d pe

rcen

tage

of t

he v

acan

cies

to b

e fil

led

byva

rious

met

hods

In c

ase

ofre

crui

tmen

t by

prom

otio

n//d

eput

atio

n//tr

ansf

er,

grad

esfr

om w

hich

pro

mot

ion/

/dep

utat

ion/

/tran

sfer

is

to b

e m

ade

Whe

ther

the

bene

fit

of a

dded

year

s of

serv

ice

isad

mis

sibl

eun

der

Rul

e30

of

CC

S(P

ensi

on)

Rul

es,

1972

Educ

atio

nal

and

othe

r qu

alifi

ca-

tions

req

uire

d fo

rdi

rect

rec

ruits

Cla

ssifi

-ca

tion

Whether age & educationalqualifications prescribed for thedirect recruits will apply in the

case of promotees

Num

ber

of post

Scal

eof pa

y

If a

D.P

.C.

exis

ts,

wha

t is

itsco

mpo

-si

tion

Cir

cum

-st

ance

s in

whi

ch t

heG

oa P

ublic

Serv

ice

Com

mis

sion

is to

be

cons

ulte

d in

mak

ing

recr

uitm

ent

Not

exc

ee-

din

g 4

0yea

rs(R

ela

xa

-b

le fo

rG

overn

-m

ent

serv

an

tsu

pto

5yea

rs in

acc

or-

da

nce

wit

h t

he

inst

ruc-

tion

s or

ord

ers

issu

ed

by t

he

Govern

-m

ent

from

tim

e to

tim

e).

02(2

011)

(Su

bje

ctto

va

ria

-ti

ond

ep

en

-d

en

ton

work

-lo

ad

).

Go

aG

en

era

lS

erv

ice,

Gro

up

‘A’,

Ga

zett

-te

d.

PB

-3R

s.15

600-

-391

00+

Gra

de

Pa

yR

s.66

00+

NPA

.

Sele

c-ti

on

.

50%

by

pro

moti

on

,fa

ilin

gw

hic

h, b

yd

irect

recr

uit

men

ta

nd

50

% b

y d

irect

recr

uit

-m

en

t.

Sen

ior

Resp

i-ra

tory

Ch

est

Ph

ysi

-ci

an

.

N

o.

Ess

enti

al:

(i) A

reco

gn

ised

Med

ica

l qu

ali

fica

-ti

on

incl

ud

ed

in t

he F

irst

or

Seco

nd

Sch

ed

ule

or

Pa

rt I

I o

f T

hir

d S

ch

ed

-u

le (

oth

er

tha

n L

ice

nti

ate

qu

ali

fi-

cati

on

) to th

e In

dia

n M

ed

ical C

ou

n-

cil A

ct, 1

956 (102 o

f 1956).

Ho

lde

rso

f re

co

gn

ise

d m

ed

ica

l q

ua

lifi

ca

-ti

on

s in

clu

ded

in P

art

II o

f th

e T

hir

dS

ched

ule

sh

ou

ld a

lso fu

lfill t

he c

on

-d

itio

ns

stip

ula

ted

in s

ub

-sect

ion

(3)

of

se

cti

on

13

of

the

sa

id I

nd

ian

Me

dic

al

Co

un

cil

Act,

19

56

(1

02

of

1956).

(ii)

Post

Gra

du

ate

Deg

ree in

Tu

ber-

cu

losi

s a

nd

Ch

est

Dis

ea

ses

fro

mre

cog

niz

ed

In

stit

uti

on

.

(iii) E

xp

eri

en

ce in

resp

on

sib

le p

osi

-ti

on

co

nn

ect

ed

wit

h t

he

sp

eci

ali

tyco

nce

rne

d f

or

3 y

ea

rs a

fte

r p

ost

gra

du

ati

on

.

(iv

) K

no

wle

dg

e o

f Ko

nka

ni.

Note

: In

ca

se o

f no

n-a

va

ila

bil

ity

of

a s

uit

ab

le c

an

did

ate

wit

h t

he

kn

ow

led

ge o

f Kon

kan

i, th

is req

uir

e-

me

nt

can

be

re

laxe

d.

Des

ira

ble

:K

no

wle

dg

e o

f Ma

rath

i.

Ag

e: N

o.

Ed

uca

-ti

on

al

qu

ali

fi-

cati

on

s:Y

es.

Two

yea

rs.

Pro

moti

on

:H

ea

lth

Off

icer

wit

hco

mb

ined

reg

ula

rse

rvic

e o

f5

ye

ars

as

Hea

lth

Off

ice

r a

nd

Med

ica

lO

ffic

er,

fail

ing

wh

ich

,M

ed

ica

lO

ffic

er

wit

h 5

yea

rsre

gu

lar

serv

ice in

the g

rad

e.

Con

sult

a-

tion

wit

hth

e G

oa

Pu

blic

Serv

ice

Com

mis

-si

on

isn

ece

s-sa

ry fo

rm

akin

gp

rom

o-

tion

,d

irect

recr

uit

-m

en

t,co

nfi

rma

-ti

on

an

dfo

ra

men

d-

ing

//r

ela

xin

ga

ny

of th

ep

rovi-

sio

ns

of

these

rule

s.

Gro

up

‘A’,

D.P

.C. c

on

si-

stin

g o

f:-

1)

Ch

air

ma

n/

/Me

mb

er

of

the

Go

aP

ub

lic

Serv

ice

Com

mis

sion

–C

ha

irm

an

.2) C

hie

fS

ecr

eta

ry o

rh

is n

om

inee

–M

em

be

r3) A

dm

ini-

stra

tive

Secr

eta

ry/

/He

ad

of

Dep

art

-m

ent

–M

em

be

r(f

or

con

firm

a-

tion

an

dp

rom

oti

on

).



1969

Department of PowerOffice of the Chief Electrical Engineer

___

Order

CEE/Estt-05-11-2008 (Revival)/AE(Civil)/6688

Sanction of the Government is hereby

conveyed for revival of one (1) lapsed post of

Assistant Engineer (Civil), Group “B”

Gazetted in the pay scale of PB-2 Rs. 9300-

-34800+G.P. Rs. 4600/-, in the Electricity

Department as per the details shown below:–

Sr. Jurisdiction Office to Budget

No. which the post Headis attached

1 2 3 4

1. North Goa Office of the 2801– PowerChief Electrical 05– Trans-Engineer, mission &Panaji Distribu-

tion001– Direction

& Admini-stration

01– Establish-ment (Non--Plan)

01– Salaries

This issues with the recommendation of

Administrative Reforms Department vide

U.O. No. 1418863 dated 16-07-2010 and

concurrence of the Finance Department

vide Entry No. 2531-F dated 05-8-2010 and also

of the approval of the cabinet as conveyed by

the General Administration Department,

Secretariat, Porvorim vide letter No. 17-46-2007-

-GAD-II (XXXXVI) dated 20-12-2010.

By order and in the name of theGovernor of Goa.

Nirmal Braganza, Chief Electrical Engineer

& ex officio Additional Secretary.

Panaji, 2nd March, 2011.

Department of Printing and Stationery

Government Printing Press___

Order

5/14/2000/GPS/GPS/PART/3772

In supersession of the order issued earlier,the Government of Goa is pleased to revisethe annual subscription rates of OfficialGazette by e-mail @ Rs. 200/- w.e.f. 1st April,2011.


N. D. Agrawal, Director & ex officio Jt.Secretary (Printing & Stationery).

Panaji, 9th March, 2011.__________

Notification

No. GPS/5-14/Revised Rates/3771

In supersession of all earlier Orders//Notifications issued in this behalf, theGovernment has revised the subscriptionrates of Official Gazettes, Series I, II & III w.e.f.1st April, 2011 as below:–

All 3 Series Series Series

Series I II III

Rs. P. Rs. P. Rs. P. Rs. P.

For any quarter .................. 900.00 460.00 350.00 175.00(Postage) ........................... 60.00 15.00 15.00 15.00

For half year ........................ 1750.00 920.00 700.00 350.00(Postage) ........................... 60.00 30.00 30.00 30.00

For any period exceeding6 months up to one year...3450.00 1840.00 1400.00 700.00(Postage) ............................ 110.00 60.00 60.00 60.00


N. D. Agrawal, Director & ex officio Jt.Secretary (Printing & Stationery).

Panaji, 9th March, 2011.


1970

Corrigendum

In the Official Gazette, Series I No. 49 dated

3-3-2011, under the Department of Public

www.goaprintingpress.gov.in

Published and Printed by the Director, Printing & Stationery,Government Printing Press,

Mahatma Gandhi Road, Panaji-Goa 403 001.

PRICE – Rs. 40.00

Health on page 1891, the date of the Order

No. 47/15/2007-I/PHD/Part I may be read

as 17th February, 2011 instead of 17th

February, 2010.

panaji, 10th march, 2011 (phalguna 19, 1932) …...official gazette — govt. of goa series i no. 50...

Documents