parker valves

PartekPFA/PTFE ValvesCatalog 4182/USA

Parker Hannifi n CorporationPartek OperationTucson, AZ

Table of Contents

Technical Information ........................................................................................................................................ 3

Manual Valves

MV-1 PTFE Stop Cock Valve ................................................................................................................. 4

MV-6 PTFE Ball Valve ............................................................................................................................ 6

MV-8 PTFE Sampling Valve ................................................................................................................... 8

MV-10 1/4” PFA 2 Way Valve .................................................................................................................. 10

MV-10 1/4” PFA 3 Way Valve .................................................................................................................. 12

MV-11 1/2” PFA 2 Way Valve .................................................................................................................. 14

MV-11 1/2” PFA 3 Way Valve .................................................................................................................. 16

MV-11 1/2” PFA 2 Way Adjustable Valve ................................................................................................. 18

MV-12 1” PFA 2 Way Valve ..................................................................................................................... 20

MV-13 PFA Needle Valve......................................................................................................................... 22

MV-14 PFA Stop Cock Valve .................................................................................................................. 24

MV-16 3/4” PFA 2 Way Valve .................................................................................................................. 26

MV-16 3/4” PFA 3 Way Valve .................................................................................................................. 28

MV-16 3/4” PFA Sampling Valve ............................................................................................................. 30

MV-20 1/4” - 1” PTFE Distribution Valve .................................................................................................. 32

Pneumatic Valves

PV-1 Miniature Pneumatic PTFE Valve ................................................................................................. 34

PV-10 1/4” Pneumatic PFA 2 Way Valve ................................................................................................. 36




PV-11 1/2” Pneumatic PFA 2 Way Adj. Bypass Valve ............................................................................. 44

PV-12 1” Pneumatic PFA 2 Way Valve .................................................................................................... 46



PV-16 3/4” Pneumatic PFA Sampling Valve ............................................................................................ 52

PV-20 1/4” - 1” PTFE Distribution Valves ................................................................................................ 54

Other Valves

CV-1 1/4” - 1” PTFE Check Valve ......................................................................................................... 56

RV 1/4” Relief Valve ........................................................................................................................... 58

SV-2 1/4” Solenoid Valve ...................................................................................................................... 60

Offer of Sale ........................................................................................................................................................ 62


3

OverviewPartek produces products that are made from only the fi nest Fuoropolymers available. These Fluoropolymers are

resistant to numerous chemicals and solvents. This information provides only a brief technical overview . For more

comprehensive technical and chemical compatibility information, please ask for Technical Bulletin 0002-T1/USA.

Fluorinated PolymersChemical Properties Electrical Properties Mechanical Properties

• Resistivity to corrosive agents • Low dielectric constant • Flexibility at low temperatures

• Non-solubility • Low dissipation factor • Low coeffi cient of friction

• Long term weatherability • High arc resistance • Stability at high temperatures

• Non-adhesiveness • High surface resistance

• Nonfl ammability • High volume resistivity

PTFE is a fl uorocarbon resin that is isostatically compression molded into various shapes and confi gurations. It is

chemically resistant to all chemicals and solvents with the exception of some molten alkali metals, molten sodium

hydroxide, elemental fl uorine and certain fl uorinating agents. At Partek we use PTFE for machining the bodies and

components of various valves and manifolds. It offers chemical resistance and stability at high temperatures.

Modifi ed PTFE material is used primarily for diaphragms and bellows in our products. This material has the same

processing and chemically resistant characteristics as the standard product but offers superior cycle life and integrity

in diaphragm products.

PFA is a copolymer of tetrafl uoroethylene and perfl uoroalkyl vinyl ether. The resultant polymer contains the carbon-

fl uorine backbone chain typical of PTFE, but unlike PTFE, does not require special fabricating techniques. PFA pellets

have good melt fl ow characteristics that allow for processing via extrusion, compression, blow, transfer and injection

molding methods. It has outstanding chemical and solvent resistant characteristics over a temperature range even

greater than PTFE. PFA is offered in various grades of purity and cleanliness making it the material of choice for the

semiconductor market.

Cv and Kv Formulas

SGP

Q = Kv

Q = Cv

YP

P = Pressure Drop (PSIG)

SG = Specific Gravity

Q = Flow (GPM)

P = Pressure Drop (BAR)

Y = Specific Gravity (kg/cm3)

Q = Flow (LPM)

1 Kv = 14.26 Cv

“CV” fl ow factor is the number of gallons of fl uid that pass

through a given orifi ce area in one minute, at a pressure

drop of 1 PSIG.

“KV” fl ow factor is the number of liters of fl uid that pass

through a given orifi ce area in one minute, at a pressure

drop of 1 bar.

For operation at temperatures above ambient conditions,

please refer to the chart above for reduced pressure ratings.

PERCENT OF RATED PRESSURE VS. TEMPERATURE

204˚C14593+38-51 -18

100

90

80

40

60

70

50

30

20

0

PER

CEN

T O

F R

ATE

D O

PER

ATI

NG

PR

ESSU

RE

OPERATING TEMPERATURE

10

400˚F300200+100-60

Technical Information


4

Product OverviewThe MV-1 PTFE Stop Cock Valve is designed for use in high

purity semiconductor fl uid applications, and is also ideally

suited for ultra-pure water and aggressive chemicals. A

precision-machined PTFE body with a straight through

fl owpath is combined with a PTFE full fl ow orifi ce stem

for maximum fl ow, minimum pressure drop and 1/4” turn

operation. The MV-1 is offered for inline and panel mounted

applications.

FeaturesFull fl ow orifi ce.

The precision machined

stem and body provide

tight shut off and 1/4

turn operation.

Parofl uor O-Ring stem

seals.

Benefi tsMaximum fl ow at the

desired size.

Minimum pressure drop.

High cycle life.

Positive body to stem

seal.

Specifi cationsMaterials of ConstructionWetted: PTFE, Parker Parofl uorTM

Non-wetted: HDPE, PFA, PVC, PVDF, Titanate

Pressure Ranges0 to 60 PSIG (4.1 bar)

Pressure ranges for operation at ambient temperatures. For use

at higher temperatures consult Pressure/Temperature chart on

page 3.

Temperature RangesAmbient: -60° - 212° F (-51° - 100° C)

Fluid: -60° - 400° F (-51° - 204° C)

MV-1 Manual Stop Cock Valve


5

MV-1 Manual Stop Cock Valve

Parfl are model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.

BRACKETED DIMENSIONS

ARE IN mm.

PRESSURE DROP VS. FLOW RATEFLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 2

5

4

10

6

15

8

20

10

25

12

30

.34

.69

1.03

1.38

1.72

2.077.6 15.1 22.7 30.3 37.9 45.4

.125 Orifice

.188 Orifice

.250 Orifice

.313 Orifice

.375 Orifice

.438 Orifice

4141-1-VM 59.1 8.72 052. YAW2 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4241-1-VM 59.1 8.72 052. LYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4341-1-VM 59.1 8.72 052. TYAW3 TPNF"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4126-1-VM 63. 1.5 521. YAW2 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4226-1-VM 63. 1.5 521. LYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.4326-1-VM 63. 1.5 521. TYAW3 eralfraP"4/1 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.6161-1-VM 00.3 8.24 573. YAW2 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6261-1-VM 00.3 8.24 573. LYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6361-1-VM 00.3 8.24 573. TYAW3 TPNF"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6146-1-VM 59.1 8.72 052. YAW2 eralfraP"8/3 ]12.54[87.1 ]94.51[16. ]57.13[52.1 ]53.6[52. ]72.33[13.1 ]65.3[41.Ø ]04.52[00.1Ø ]07.21[05.6246-1-VM 59.1 8.72 052. LYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.6346-1-VM 59.1 8.72 052. TYAW3 eralfraP"8/3 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8181-1-VM 55.6 4.39 834. YAW2 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8281-1-VM 55.6 4.39 834. LYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8381-1-VM 55.6 4.39 834. TYAW3 TPNF"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8166-1-VM 00.3 8.24 573. YAW2 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.5[02.Ø ]85.63[44.1Ø ]42.51[06.8266-1-VM 05.2 7.53 313. LYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.8366-1-VM 05.2 7.53 313. TYAW3 eralfraP"2/1 ]09.65[42.2 ]08.81[47. ]01.83[05.1 ]07.21[05. ]54.44[57.1 ]80.[02.Ø ]85.63[44.1Ø ]42.51[06.

1.15 [29.21]

1.23 [31.24]

3/8" PARFLARE

1/4" PARFLARE 1/4" FNPT

.50 [12.70]

3/8" FNPT

.50 [12.70]

1/2" FNPT

.63 [16.00]

E(HEX)

D (MAX.)

Ø 2.92 [74.17]

2X

3 WAY 3 WAY2 WAY

STEM TOP

A

B

C (SQ.)

PATTERN

GH

2X

PANEL MTG. HOLE

F2X

H

L T1/2" PARFLARE

1.35 [34.29]

ledoMrebmuN

vC vK ecifirOwolF

.gifnoCtroP

.gifnoC]mm[nisnoisnemiD

A B C D E F G H


6

FeaturesFloating ball design

without o-rings ensures

bubble tight sealing at

high pressure.

Full port design; 1/4

turn operation with low

torque tee handle.

Panel mounting is an

option on all sizes.

Benefi tsBidirectional fl ow to 120

psi liquid or gas; High

cycle life.

Ideal for quick shut-off

in contamination-free

applications.

Ideal for process

instrumentation

applications.

Product OverviewThe MV-6 PTFE Ball Valves are designed for use in high

purity semiconductor applications, and are also ideally

suited for use in ultra-pure water and aggressive chemicals.

All sizes have wetted parts made entirely of PTFE. All valves

are designed full port for minimal fl ow restrictions and are

operated 1/4 turn with minimal torque.

Specifi cationsMaterials of ConstructionWetted: PTFE

Non-wetted: HDPE, PVDF and PVC

Pressure Ranges25” HG vacuum (846 mbar) to 120 PSIG (8.3 bar)



page 3.


Fluid: -60° - 400° F (-51° - 204° C)

MV-6 Manual Ball Valve


7

ØD

E

A

B

C

MV-6 Manual Ball Valve


FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

1

20

2

30

3

40

4

50

5

60

6

.07

.14

.21

.28

.35

.4138 76 113 151 189 227

1/4" FNPT1/2" FNPT 1" FNPT


ARE IN mm.

rebmuNledoM vC vK .gifnoCwolF .gifnoCtroP]mm[nisnoisnemiD

A B C D E

0-4141-6-VM 88.1 18.62

FFO/NO

TPNF"4/1 ]49.34[37.1 ]67.61[66. ]19.37[19.2 ]92.05[89.1Ø ]72.33[13.1

0-8181-6-VM 95.6 79.39 TPNF"2/1 ]98.65[42.2 ]06.22[98. ]94.49[27.3 ]80.96[27.2Ø ]08.05[00.2

0-611611-6-VM 60.82 41.004 TPNF"1 ]77.08[81.3 ]03.53[93.1 ]00.721[00.5 ]67.111[04.4Ø ]62.46[35.2


8

FeaturesOne piece precision

machined diaphragm

manufactured from the

latest technology

modifi ed PTFE, provides

over fi ve times the fl ex-

ural life as compared to

conventional PTFE.

Full fl ow through port.

Purge port option.

Benefi tsHigher cycle life result-

ing in less downtime

and lower replacement

costs.

Reduced pressure drop.

Allows system mainte-

nance downstream of

valve without disrupting

main fl ow.

Specifi cationsMaterials of ConstructionWetted: PTFE, Modifi ed PTFE

Non-wetted: PVDF

Pressure Ranges27” HG vacuum (913 mbar) to 120 PSIG (8.3 bar)



page 3.

Temperature RangesAmbient: 0° - 212° F (17° -100° C)

Fluid: 0° - 400° F (17° - 204° C)

Product OverviewThe MV-8 PTFE Sampling Valve is designed for use in high

purity semiconductor applications, and is also ideally suited

for ultra-pure water or aggressive chemicals. The design

utilizes a machined PTFE body with precision machined

seat and diaphragm sealing areas. A one piece machined

modifi ed PTFE diaphragm is also utilized for excellent fl ex-

ibility and life. The valve incorporates a full fl ow through port

with a low dead volume down leg. The purge port option

makes this the valve of choice for valve manifold boxes

and distribution systems.

MV-8 Manual Sampling Valve


9

Parfl are model numbers are supplied with PVDF nuts. For PFA nuts add -T to model number.

MV-8 Manual Sampling Valve

STYLE 2

I

D

HF

A1

B

SE

B1C

BE

B1C1C1CE

I

D STYLE 1

P

SIZE)PURGE

N

STYLE 4

I

D

HF

A1

B

A

PO EN

B1C

BGE

B1C1

I

D

STYLE 3

F

A

A1

H

K K1

C1

GE

B1 J1

rebmuNledoMtroPhguorhT troPgnilpmaS troPegruP

troPhguorhT troPgnilpmaS troPegruPvC vK ecifirO vC vK ecifirO vC vK ecifirO

1-4866-8-VM 2.3 7.54 573. 2. 8.2 521. A/N A/N A/N eralfraP"2/1 eralfraP"4/1 A/N1-212166-8-VM 0.31 6.581 526. 6.4 7.56 526. A/N A/N A/N eralfraP"4/3 eralfraP"4/3 A/N

1-82166-8-VM 0.31 6.581 526. 3.2 8.23 573. A/N A/N A/N eralfraP"4/3 eralfraP"2/1 A/N1-46166-8-VM 3.73 6.235 578. 2. 8.2 521. A/N A/N A/N eralfraP"1 eralfraP"4/1 A/N1-616166-8-VM 3.73 6.235 578. 2.7 8.201 578. A/N A/N A/N eralfraP"1 eralfraP"1 A/N10-1-82166-8-VM 0.31 6.581 526. 3.2 8.23 573. 2. 8.2 521. eralfraP"4/3 eralfraP"2/1 eralfraP"4/150-1-82166-8-VM 0.31 6.581 526. 3.2 8.23 573. 1.1 7.51 573. eralfraP"4/3 eralfraP"2/1 eralfraP"2/110-1-212166-8-VM 0.31 6.581 526. 6.4 7.56 526. 2. 8.2 521. eralfraP"4/3 eralfraP"4/3 eralfraP"4/1

10-1-86166-8-VM 3.73 6.235 578. 3.2 8.23 573. 1.1 7.51 573. eralfraP"1 eralfraP"2/1 eralfraP"2/110-1-216166-8-VM 3.73 6.235 578. 6.4 7.56 526. 2. 8.2 521. eralfraP"1 eralfraP"4/3 eralfraP"4/110-1-616166-8-VM 3.73 6.235 578. 2.7 8.201 578. 2. 8.2 521. eralfraP"1 eralfraP"1 eralfraP"4/1

)ni(SNOISNEMID

ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q

-VM 1-4866-8 1 05.1 - "2/1 53.1 "4/1 51.1 65. 05.1 - - - 75.2

1-212166-8-VM 2 05.3 26.4 "4/3 64.1 "4/3 64.1 00.1 05.3 21.4 00.3 662.Ø 15.4

1-82166-8-VM 2 00.3 21.4 "4/3 64.1 "2/1 53.1 00.1 00.3 26.3 05.2 662.Ø 15.4

1-46166-8-VM 2 00.3 21.4 "1 08.1 "4/1 51.1 00.1 00.3 26.3 05.2 662.Ø 15.4

1-616166-8-VM 3 05.3 21.4 "1 08.1 "1 08.1 00.1 05.3 21.4 00.3 662.Ø 36.4

10-1-82166-8-VM 4 05.4 05.5 '2/1 53.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.

50-1-82166-8-VM 4 36.4 57.5 '2/1 53.1 "4/3 64.1 57. 05.2 73.5 00.2 662.Ø 05.4 "2/1 53.1 "4/3 64.1 88. "2/1 29.

10-1-212166-8-VM 4 05.4 05.5 "4/3 64.1 "4/3 64.1 57. 05.2 31.5 00.2 662.Ø 05.4 "4/1 51.1 "4/3 64.1 57. "4/1 57.

10-1-86166-8-VM 4 36.4 57.5 "2/1 53.1 "1 08.1 57. 00.3 73.5 00.2 662.Ø 06.4 "2/1 53.1 "1 08.1 88. "2/1 29.

10-1-216166-8-VM 4 05.4 05.5 "4/3 64.1 "1 08.1 39. 00.3 31.5 40.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.

10-1-616166-8-VM 4 05.4 05.5 "1 08.1 "1 08.1 39. 00.3 31.5 45.2 662.Ø 06.4 "4/1 51.1 "1 08.1 57. "4/1 39.

)mm(SNOISNEMID

ELYTS A 1A B 1B C 1C D E F G H I J 1J K 1K N P Q

-VM 1-4866-8 1 1.83 - "2/1 3.43 "4/1 2.92 2.41 1.83 - - - 3.56

1-212166-8-VM 2 9.88 3.711 "4/3 1.73 "4/3 1.73 4.52 9.88 6.401 2.67 67.6Ø 6.411

1-82166-8-VM 2 2.67 6.401 "4/3 1.73 "2/1 3.43 4.52 2.67 9.19 5.36 67.6Ø 6.411

1-46166-8-VM 2 2.67 6.401 "1 7.54 "4/1 2.92 4.52 2.67 9.19 5.36 67.6Ø 6.411

1-616166-8-VM 3 9.88 6.401 "1 7.54 "1 7.54 4.52 9.88 6.401 2.67 67.6Ø 6.711

10-1-82166-8-VM 4 3.411 7.931 '2/1 3.43 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91

50-1-82166-8-VM 4 6.711 0.641 '2/1 3.43 "4/3 1.73 1.91 5.36 4.631 8.05 67.6Ø 3.411 "2/1 3.43 "4/3 1.73 4.22 "2/1 4.32

10-1-212166-8-VM 4 3.411 7.931 "4/3 1.73 "4/3 1.73 1.91 5.36 3.031 8.05 67.6Ø 3.411 "4/1 2.92 "4/3 1.73 1.91 "4/1 1.91

10-1-86166-8-VM 4 6.711 0.641 "2/1 3.43 "1 7.54 1.91 2.67 4.631 8.05 67.6Ø 8.611 "2/1 3.43 "1 7.54 4.22 "2/1 1.91

10-1-216166-8-VM 4 3.411 7.931 "4/3 1.73 "1 7.54 6.32 2.67 3.031 8.15 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32

10-1-616166-8-VM 4 3.411 7.931 "1 7.54 "1 7.54 6.32 2.67 3.031 5.46 67.6Ø 8.611 "4/1 2.92 "1 7.54 1.91 "4/1 6.32


10


machined diaphragms

manufactured from

the latest technology

modifi ed PTFE. Provides

over fi ve times the

fl exural life as compared

to conventional PTFE.

Tongue and groove

seat and diaphragm for

positive through fl ow

shut off and diaphragm

to body seal.

PVDF coated stainless

steel spring.

Quarter turn operation

with removable handle

for tamper resistance.

Benefi tsHigh cycle life.

Lower replacement

costs.

Less downtime.

Reduces effects of

corrosive environments.

Eliminates need for

separate lockout device.

Specifi cationsMaterials of ConstructionWetted: PFA, Modifi ed PTFE

Non-wetted: PFA, PVDF, 18-8 SS, Viton seals, PTFE coated SS springs

Pressure RangesForward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

Backward: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)



page 3.

Temperature RangesAmbient: 0° - 150° F (17° - 66° C)

Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-10 PFA 2 Way Diaphragm Valve is designed for

use in high purity semiconductor applications. It is also

ideally suited for ultra-pure water and aggressive chemical

or gas applications. The design utilizes a molded high purity

PFA body with precision machined sealing areas. A one

piece machined modifi ed PTFE diaphragm is also utilized

for excellent fl exibility and life. A full 1/4” orifi ce provides

maximum fl ow capability in a compact package.

MV-10 1/4” Manual 2 Way Valve


11

PVDF SCREWCOVER

-10

1/4" PARFLARE1.23

[31.24]1.12

[28.45]

HEX NUTW/ STUD

3/8" PARFLARE3/8" PARGRIP1/4" PARGRIP

1.13 [28.70]

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

IN

OU

T

.88 [22.35]

APDV

F 1/4"1/4"

ALF

RE

P R

2.20 [55.82]

.13[3.30]MAX

PANELTHK.

1.25 [31.78]

1.15 [29.21]

-00

IN

.050 R[1.30]

.527[13.39] OUT

SCREW

Ø1.250BOLT CIRCLE

Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)

LOCATING TAB

POSITION

1/4" FNPT

.56 [14.22]

MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)

.31 [7.87]

Pargrip models are supplied with PFA nuts. Parfl are models are supplied with PVDF nuts. For PFA nuts add -T to model number.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroPXX-noitarugifnoCgnitnuoM

)evobAdetcipeD(


ARE IN mm.

XX-4401-01-VM 06. 6.8

FFO/NO

TPNF"4/1wercS=00

erauqS08.dutS/wercS=10elcriCtloB52.1ØdutS/wercS=20

srevoCwercSFDVP=01

XX-4302-01-VM 42. 4.3 pirgraP"4/1XX-6402-01-VM 26. 8.8 pirgraP"8/3XX-4206-01-VM 02. 8.2 eralfraP"4/1XX-6406-01-VM 26. 8.8 eralfraP""8/3

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]

seirosseccA noitpircseD

01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34

FLOW RATE (lpm)PRESSURE DROP VS. FLOW RATE

1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

1/4" Parflare1/4" Pargrip1/4" FNPT 3/8" Parflare & Pargrip


12


machined diaphragms

manufactured from






Tongue and groove




to body seal.


steel spring.

Quarter turn operation

with removable handle

for tamper resistance.


Lower replacement

costs.

Less downtime.

Reduces effects of


Eliminates need for








page 3.


Fluid: 0° - 266° F (17° - 130° C)











13

PVDF SCREWCOVER

-10

1.23 [31.24]

1.12 [28.45]

HEX NUTW/ STUD


1.13 [28.70]

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN

.050 R[1.30]

.527[13.39] OUT

SCREW

Ø1.250BOLT CIRCLE

Ø1.00/1.02 [25.40/25.91] PANEL HOLE (NOTE: ORIENTATION OF LOCATING SLOT DEPENDENT UPON VALVE/MOUNTING CONFIGURATION.)

1/4" FNPT

.56 [14.22]

MOUNTINGCONFIGURATIONS(MV-10-XXXX-XX)

2.20 [55.82]

COMNC NO

1.15 [29.21]

1.25 [31.78]

.88 [22.35]

LOCATING TAB

POSITION

.13[3.30]MAX

PANELTHK.

.63 [15.90]

AAFFLLAA

RRPPFF

VV

EERR

PPDD

1/4"1/4"

.31 [7.87]

1/4" PARFLARE


ARE IN mm.



DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5



01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VMdna00-XXXX-01-VMhtiwesuroF.esaBgnitnuoMni-panSFDVP

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]


)evobAdetcipeD(

XX-4431-01-VM 06. 6.8

YAW3

TPNF"4/1wercS=00


srevoCwercSFDVP=01

XX-4332-01-VM 42. 4.3 pirgraP"4/1XX-6432-01-VM 26. 8.8 pirgraP"8/3XX-4236-01-VM 02. 8.2 eralfraP"4/1XX-6436-01-VM 26. 8.8 eralfraP""8/3


14


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.

Submergible option

isolates all valve

components from the

external environment.


Lower replacement

costs.

Less downtime.

Reduces effects of


Valve remains functional

while operating in wet

or gaseous corrosive

environments.


Non-wetted: PFA, PVDF, Viton seals, PTFE coated SS springs

Pressure RangesForward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)

Backward: 27” HG vacuum (913 mbar) to 100 PSIG (7 bar)



page 3.


Fluid: 0° - 266° F (17° - 130° C)











15

.375 [9.52]MAX. PANEL

WIDTH

4.98 [126.47]

2X .26 [6.60]

1.81 [46.05]

2.02 [51.33]

.55 [14.00]

Ø2.90[Ø73.66]

1/2" FNPT 3/4" PARFLARE

1/2" PARFLARE

OUT OUT

Ø1.437 [36.50]

PANEL HOLE DETAIL

PORTPORT

2X Ø.125[Ø3.18]

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

2.05 [52.10]

1/2" PARBOND 3/4" PARBOND

OUT

2.02 [51.33]

OUT

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

IN

TEST PORT CONNECTION, 1/4-28 UNF


ARE IN mm.


Parfl are models are supplied with PVDF nuts. For PFA nuts add -T to model number.

100-11-VM 3.2 8.23

FFO/NO

eralfraP"2/1200-11-VM 7.3 8.25 eralfraP"4/3300-11-VM 7.3 8.25 dnobraP"2/1400-11-VM 7.3 8.25 dnobraP"4/3500-11-VM 7.3 8.25 TPNF"2/1

rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP


FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113

1/2" ParfareAll Other Configurations


16


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.

Submergible option

isolates all valve

components from the



Lower replacement

costs.

Less downtime.

Reduces effects of





environments.



Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

COM to NC: 27” HG vacuum (913 mbar) to 25 PSIG (1.7 bar) minimum

NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

with 50 PSIG (3.4 bar) maximum back pressure



page 3.


Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-11 PFA 3 Way Diaphragm Valve is designed for use

in high purity semiconductor applications. It is also ideally

suited for ultra-pure water and aggressive chemical or gas

applications. The design utilizes a molded high purity PFA

body with precision machined sealing areas. One piece

machined modifi ed PTFE diaphragms are also utilized





17

1/2" FNPT

NO

3/4" PARFLARE

2.01 [50.93]

2.06 [52.25]

NO

1/2" PARBOND

2.06 [52.25]

NO

3/4" PARBOND

NO

.375 [9.52] MAX.PANEL WIDTH

NC

"1/2

APDVP

F

COM

REA

LF

R

1.82 [46.20]

5.87 MAX. [149.07]

Ø1.636 [41.55]

1.58 [40.18]

2.88 [73.03]

MOUNTING DETAIL

Ø1.44 [36.58]

2X .68 [17.32]

[1.65]2X R .065

PANEL HOLE DETAIL

.57 [14.40]

Ø2.93

2X Ø.26

3.23 [82.12]

2.60 [65.96]

1.30 [33.07]

[74.42]

[6.60]

1/2" PARFLARE

TEST PORT CONNECTIONS, 1/4-28 UNF


ARE IN mm.




120-11-VM 9.1 1.72

YAW3



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113



18


machined diaphragm

manufactured from






Tongue and groove

diaphragm to body

seal assures leak free

operation.


steel spring.

Multi-turn operation.

Removable handle.


Lower replacement

costs.

Less downtime.

Reduces effects of


Precise fl ow

adjustment.

Eliminates need for








page 3.


Fluid: 0° - 266° F (17° - 130° C)

Product OverviewThe MV-11 PFA Adjustable Diaphragm Valve is designed

for use in high purity semiconductor applications. It is also


or gas applications. The design utilizes a molded high

purity PFA body with precision machined sealing areas.

A one piece machined modifi ed PTFE diaphragm is also

utilized for excellent fl exibility and life. Multi-turn capability

allows precise fl ow adjustment. A full 1/2” orifi ce provides


MV-11 1/2” Manual 2 Way Adjustable Valve


19

.375 [9.52]MAX. PANEL

WIDTH

3/4" PARFLARE

OUTOUT

1/2" FNPT

Ø2.90[Ø73.66]

2X Ø1.25[Ø3.18]

1.81 [46.05]

2X .26 [6.60]

.55 [14.00]

2.02 [51.33]

4.96 [125.98]

PORT

Ø1.437 [36.50]

PORT

PANEL HOLE DETAIL

1/2" PARFLARE

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

IN

OUT

2.05 [52.10]


2.02 [51.33]

OUT

TEST



ARE IN mm.

MV-11 1/2” Manual 2 Way Adjustable Valve



102-11-VM 3.2 8.23

.JDA



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113



20


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.

Submergible option

isolates all valve

components from the



Lower replacement

costs.

Less downtime.

Reduces effects of





environments.







page 3.

Temperature RangesAmbient: 0° - 150° F (-17° - 66° C)

Fluid: 0° - 266° F (-17° - 130° C)

Product OverviewThe MV-12 PFA Diaphragm Valve is designed for use in

high purity semiconductor applications, and is also ideally



body with precision machined seat and diaphragm sealing

areas. A one piece machined modifi ed PTFE diaphragm

is also utilized for excellent fl exibility and life. The valve

requires three full turns from the fully closed to fully open

position. A full 1” orifi ce provides maximum fl ow capability

in a compact package.

MV-12 1” Manual 2 Way Valve


21

AIR AND TEST PORT

CONNECTIONS, 1/8” FNPT


ARE IN mm.

MV-12 1” Manual 2 Way Valve


7.037.03[178.56][178.56]

1.071.07 [27.23] [27.23]

4.004.00 [101.70] [101.70]

2.322.32 [58.85] [58.85]

PARBONDPARBOND 3/4" 3/4"

PARFLARE PARFLARE 3/4" 3/4"

2.282.28 [57.96] [57.96]

2.592.59 [65.86] [65.86]

PARFLARE PARFLARE 1" 1"

Ø4.22Ø4.22 [Ø107.19] [Ø107.19]

2X Ø.282X Ø.28 [Ø7.11] [Ø7.11]

3.753.75 [95.35] [95.35]

1.881.88 [47.68] [47.68]

1" PARBOND1" PARBOND

4.284.28 [108.81] [108.81]

2.562.56 [65.00] [65.00]

AIR

INOUT

TEST

.26.26[6.60][6.60]

Part Number Cv Kv Flow Confi guration Port Confi guration

MV-12-001 15.7 224.2

ON/OFF

1” Parbond

MV-12-002 13.3 189.9 1” Parfl are

MV-12-003 9.6 142.8 3/4” Parbond

MV-12-004 6.8 142.8 3/4” Parfl are

PRESSURE DROP VS. FLOW RATE

FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parflare

3/4" Parbond

1" Parflare

1" Parbond


22

FeaturesOne piece PFA stem/

handle and bodies.

PFA stem stop.

Angle and straight

through confi gurations,

with numerous end

confi gurations including

Parfl are available.

Specifi cationsMaterials of ConstructionWetted: PFA, PTFE

Non-wetted: PFA, ETFE, PVDF

Pressure Ranges27” HG vacuum (913 mbar) to 100 PSIG (7 bar)



page 3.


Fluid: 0° - 266° F (17° - 130° C)

Benefi tsHigh strength and

corrosion resistance.

Safer operation.

Reduces connections,

mounting space, and

overall cost.

Product OverviewThe MV-13 PFA Needle Valve is designed for high purity

or aggressive chemical and gas applications. The design

utilizes a molded high purity PFA body and stem as the only

wetted components. The stem sealing area is precision

machined for smooth, consistent fl ow. A PTFE ferrule

assures a leak tight seal between stem and body. A PFA

stem stop prevents removal of stem from body during

operation. The MV-13 is available in straight through and

angle confi gurations, several orifi ce sizes, and numerous

end connections.

MV-13 Manual Needle Valve


23

Ø .26[6.48]

Ø 1.50[38.1]

Ø .63 [16.00] .69 [17.53]

1.35 [34.29]

1.23 [31.24]

.56 [14.22]

.57 [14.35]

1.15 [29.21]

1.33 [33.76]

1/2" PARGRIP

1.12 [28.45]

3/8" PARGRIP

.38 [9.52]MAX. PANEL

WIDTH

1/4" PARGRIP

1/8" PARGRIP

.52 [13.28]

1.87 [47.57] (MAX.)

1.13 [28.70]

3/8" PARFLARE

1/4" PARFLARE

.75 [19.05]

1/2" PARFLARE

3.83 [97.35](MAX.)

1.05 [26.54]

5.06[128.52](MAX.)

3.31[84.07](MAX.)

.31 [7.92]

DETAILPANEL HOLE

.52 [13.26]

1/4" FNPT

1/8" FNPT

INLINE ANGLED

1/4" MNPT

.55 [13.97]

Parfl are and Pargrip model numbers are supplied with PFA nuts.

MV-13 Manual Needle Valve

rebmuNledoM eziSecifirO noitarugifnoCtroPteltuO/telnI noitarugifnoCwolF

001-31-VM 360. pirgraP"8/1XpirgraP"8/1

thgiartS

401-31-VM 360. eralfraP"4/1XeralfraP"4/1501-31-VM 360. eralfraP"4/1XTPNM"4/1021-31-VM 521. pirgraP"4/1XpirgraP"4/1421-31-VM 521. eralfraP"8/3XeralfraP"8/3521-31-VM 521. eralfraP"2/1XeralfraP"2/1621-31-VM 521. TPNF"8/1XTPNF"8/1361-31-VM 881. pirgraP"8/3XpirgraP"8/3661-31-VM 881. pirgraP"2/1XpirgraP"2/1071-31-VM 881. TPNF"4/1XTPNF"4/1222-31-VM 521. eralfraP"4/1XeralfraP"4/1

elgnA322-31-VM 521. TPNF"4/1XTPNF"4/1522-31-VM 521. eralfraP"8/3XeralfraP"8/3

Cv / Kv vs. TURNS

TURNS

Cv

Kv

0 1

0.1

2

0.2

3

0.3

4

0.4

5

0.5

6

0.6

1.43

2.86

4.28

5.71

7.14

8.57

.188 - All Configurations

.125 - All But 1/4" Pargrip

.125 - All Angle Configurations

.125 - 1/4" Pargrip

.063 - All But 1/8" Pargrip

.063 - 1/8" Pargrip


ARE IN mm.


24

Product OverviewThe MV-14 PFA 2 Way Stop Cock Valve is designed

for use in high purity semiconductor applications. The

design utilizes a molded high purity PFA body, and a

machined PTFE stem. The press-fi t stem assures a leak

tight seal between it and the body during operation. Valve

operates with a quick 90° turn operation and has a full

1/8” orifi ce.

MV-14 Manual 2 Way Stop Cock Valve

Specifi cationsMaterials of ConstructionWetted: PFA, PTFE

Non-wetted: PFA, PVDF

Pressure Ranges0 to 60 PSIG (4.1 bar)



page 3.


Fluid: 0° - 266° F (17° - 130° C)


machined stem and

molded high purity PFA

body.

All components made

of chemical resistant

materials.

Numerous end

confi gurations,

including Parfl are

available.

Benefi tsMaintains system purity.

Suitable for use in


Allows direct

installation, minimizing

additional connections,

reducing cost.


25

1.05 [26.67]

.55 [13.97]

.95 [24.13]

1.63 [41.28]

1.33 [33.66]

[29.21]1.15

1.18 [29.97]

[13.97].55

1.13 [28.70]

.75 [19.05]

1/4" REDI-FLARE

1/8" MNPT

1/4" MNPT

1/8" PARGRIP

1/4" PARGRIP

1/4" PARFLARE



ARE IN mm.

MV-14 Manual 2 Way Stop Cock Valve

rebmuNledoM CV KV noitarugifnoCwolF troPtelnI troPteltuO

300-41-VM 72. 58.3

FFO/NO

pirgraP"4/1 pirgraP"4/1400-41-VM 72. 58.3 pirgraP"4/1 TPNM"8/1500-41-VM 72. 58.3 pirgraP"4/1 TPNM"4/1600-41-VM 72. 58.3 TPNM"4/1 TPNM"4/1700-41-VM 72. 58.3 eralfraP"4/1 eralfraP"4/1510-41-VM 72. 58.3 eralfraP"4/1 TPNM"4/1610-41-VM 72. 58.3 eralfraP"4/1 eralf-ideR"4/1810-41-VM 72. 58.3 pirgraP"8/1 pirgraP"8/1

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

All Configurations


26

Product OverviewThe MV-16 PFA diaphragm valve is designed for use in






is also utilized for excellent fl exibility and life. The MV-16’s

multi-turn capability allows precise fl ow adjustment. A full

3/4” orifi ce provides maximum fl ow capability in a compact

package.

MV-16 3/4” Manual PFA 2 Way Valve


machined diaphragm

manufactured from






Tongue and groove




to body seal.

Halar coated stainless

steel spring.


Lower replacement

costs.

Less downtime.

Reduces effects of



Non-wetted: PVDF, Viton, PTFE coated SS spring

Pressure Ranges0 - 120 PSIG (8.3 bar) See Cracking Pressure Chart on next page.



page 3.


Fluid: 0° - 266° F (-17° - 130° C)


27

2.73 [69.3 mm]

3.43 [87.1 mm]

6.21 [157.8 mm]

A

1.70 [43.2 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]

4X 75˚EQUALLYSPACED

AIR PORT CONNECTION, 1/8” FNPT



ARE IN mm.


*Ends are fused on.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD

A

2160-61-VM 8.5 7.28

FFO/NO

eralfraP"4/3 ]27.041[45.5

10-2160-61-VM 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6

6160-61-VM 9.7 6.211 *eralfraP"1 ]56.132[21.9

2170-61-VM 9.7 6.211 dnobraP"4/3 ]68.941[09.5

CRACKING PRESSURE

PRESSURE TO INLET PORT (bar)

PRESSURE TO INLET PORT (psi)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9

SPECIFIED SEALING AREA


FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parflare 3/4" Parbond, 1" Parflare


28

Product OverviewThe MV-16 PFA diaphragm valve is designed for use in







multi-turn capability allows precise fl ow adjustment. A full

3/4” orifi ce provides maximum fl ow capability in a compact

package.



machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.


Lower replacement

costs.

Less downtime.

Reduces effects of







page 3.


Fluid: 0° - 266° F (-17° - 130° C)


29

2.69 [68.4 mm]

3.39 [86.2 mm]

1.66 [42.2 mm]

6.44 [163.4 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


AB


*Ends are fused on.

MV-16 3/4” Manual PFA 3 Way ValveBRACKETED DIMENSIONS

ARE IN mm.



rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP]mm[nisnoisnemiD

A B

2163-61-VM 4.5 0.77

YAW3

CNMOC

ON

eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

10-2163-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2

6163-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4

2173-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2

2164-61-VM 4.5 0.77

stroPdesreveRYAW3

ONMOC

CN

eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

10-2164-61-VM 4.5 0.77 gnoLeralfraP"4/3 ]95.461[84.6 ]73.17[18.2

6164-61-VM 3.7 1.401 *eralfraP"1 ]56.132[21.9 ]28.511[65.4

2174-61-VM 3.7 1.401 dnobraP"4/3 ]68.941[09.5 ]39.47[59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227



30

Product OverviewThe MV-16 PFA sampling valve is designed for use in







multi-turn capability allows precise fl ow adjustment. The

valve incorporates a full fl ow through port with a low dead

volume down leg.

MV-16 3/4” Manual PFA Sampling Valve


machined diaphragm

manufactured from







steel spring.



Lower replacement

costs.

Less downtime.

Reduces effects of








page 3.


Fluid: 0° - 266° F (-17° - 130° C)


31

6.49 [164.7 mm]

2.69 [68.4 mm]

3.39 [86.2 mm]

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


1.66 [42.2 mm]

AB


MV-16 3/4” Manual PFA Sampling Valve




ARE IN mm.

rebmuNledoMtroPhguorhT troPelpmaS

troPhguorhT troPelpmaS]mm[nisnoisnemiD

vC vK vC vK A B

806-2165-61-VM 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]27.041[45.5 ]38.86[17.2

216-2165-61-VM 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]27.041[45.5 ]73.17[18.2

217-2165-61-VM 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]27.041[45.5 ]39.47[59.2

806-2175-61-VM 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]68.941[09.5 ]38.86[17.2

216-2175-61-VM 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]68.941[09.5 ]73.17[18.2

217-2175-61-VM 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 68.941[09.5 ]39.47[59.2

CRACKING PRESSURE

PRESSURE TO THROUGH PORT (bar)

PRESSURE TO THROUGH PORT (psi)

PR

ES

SU

RE

TO

SA

MP

LE

PO

RT

(p

si)

PR

ES

SU

RE

TO

SA

MP

LE

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



32

MV-20 1/4” - 1” Manual PTFE Slurry Valve

Product OverviewThe MV-20 slurry valve is designed for use slurry ap-

plications, and is also ideally suited for ultra-pure water

and aggressive chemical or gas applications. The design


seat and diaphragm sealing areas. The valve is offered in

3 orifi ce sizes (1/4”, 1/2” and 1”) and port sizes ranging

from 1/4” to 1 1/4”.

FeaturesFully swept open bowl

diaphragm seat area.

Self draining design.

High load point seat seal.

Angled and rounded internal

fl ow path.

One piece precision

machined diaphragm

manufactured from modifi ed

PTFE.

Evenly distributed seat

sealing forces.

Maximized diaphragm

thickness.

Benefi tsMinimizes fl uid shear and

smooth fl ow transition.

Minimizes area for

entrapment and stagnation

of media.

Improves sealing

mechanism for aggressive

chemicals, deionized water

and abrasive slurry media.

Minimizes particle

contribution of valve.

Provides faster purging and

cleaning of valve.

Less pressure drop

allows for lower pressure

requirements upstream.

Improves fl uid fl ow

dynamics.

Improves cycle life, less

shear than standard PTFE

material, lower replacement

costs, less downtime.

Minimized diaphragm and

valve seat strain.

Stabilizes valve back

pressure capability.

Minimizes potential

for permeation while

maximizing cycle life.



Pressure Ranges1/4” Orifi ce: 27” HG vacuum (913 mbar) - 80 PSIG (5.5 bar)

1/2” Orifi ce: 27” HG vacuum (913 mbar) - 100 PSIG (7 bar)

1” Orifi ce: 27” HG vacuum (913 mbar) - 100 PSIG (7 bar)



page 3.


Fluid: 0° - 266° F (-17° - 130° C)


33

A

F

E

1/4” ORIFICE: 2X Ø.17 THRU, C.B. Ø.28 X .401/2” ORIFICE: 2X Ø.19 THRU, C.B. Ø.31 X .50

1” ORIFICE: 2X Ø.28 THRU, C.B. Ø.44 X 1.00

1/4-28 UNF LEAK DETECTION PORT

D

C

B

1/2” & 1” ORIFICE HOUSING STYLEMULTI-TURN OPERATION

1/4” ORIFICE HOUSING STYLEMULTI-TURN OPERATION

1/4” ORIFICE HOUSING STYLE MULTI-TURNOPERATION W/ PANEL MOUNT

1/4” ORIFICE: 0.18 [4.57]1/2” ORIFICE: 0.25 [6.35] 1” ORIFICE: 0.28 [7.11]

1/4” ORIFICE (ALL PORT CONFIGURATIONS): 0.55 [13.97]1/2” ORIFICE (ALL PORT CONFIGURATIONS): 1.44 [36.58]1” ORIFICE (3/4” & 1” PARFLARE PORT CONFIGURATIONS): 1.50 [38.10]1” ORIFICE (1 1/4” PARFLARE PORT CONFIGURATION): 2.00 [50.80]

1/4” ORIFICE HOUSING STYLE1/4 TURN OPERATION W/ LOTO

1.31[33.37]

0.25[6.35] MAX

HEX

PANEL MOUNTING HOLE PATTERN

X

MV-20 1/4” - 1” Manual PTFE Slurry Valve

Parfl are models are supplied with PVDF nuts. For PFA nuts add -T to model number. Contact factory for Pillar end connections.

*Does not include mounting holes for this model only.


FLOW RATE (gpm)

DEL

TA-P

(psi

)

DEL

TA-P

(bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

MV-

20-0

8-06

08

MV-

20-0

8-06

12

MV-

20-1

6-06

12

MV-20-16-0616

MV-20-16-0620

FLOW RATE (lpm)

FLOW RATE (gpm)

DEL

TA-P

(psi

)

DEL

TA-P

(bar

)

0 1

5

2

10

3

15

4

20

5

25

6

30

.34

.69

1.0

1.4

1.7

2.13.8 7.6 11.3 15.1 18.9 22.7

MV-

20-0

4-06

04M

V-20

-04-

0604

-MT

MV-

20-0

4-06

04-M

T-P

MV-

20-0

4-06

06

MV-

20-0

4-06

06-M

T

MV-

20-0

4-06

06-M

T-P

Part Number Cv KvBody

SizeValve Type

Port

Confi guration

A B C D E F

inch mm inch mm inch mm inch mm inch mm inch mm

MV-20-04-0604 .20 2.8 1/4” 1/4 TURN

LOTO

1/4” Parfl are 3.80 96.52 1.50 38.10 1.15 29.21 2.91 73.91 1.25 31.75 0.50 12.70

MV-20-04-0606 .76 10.8 1/4” 3/8” Parfl are 3.96 100.58 1.50 38.10 1.15 29.21 2.91 73.91 1.25 31.75 0.50 12.70

MV-20-04-0604-MT .20 2.8 1/4”

MULTI-TURN

1/4” Parfl are 3.80 96.52 1.50 38.10 1.15 29.21 2.27 57.66 1.25 31.75 0.50 12.70

MV-20-04-0606-MT .76 10.8 1/4” 3/8” Parfl are 3.96 100.58 1.50 38.10 1.15 29.21 2.27 57.66 1.25 31.75 0.50 12.70

MV-20-08-0608 2.4 34.2 1/2” 1/2” Parfl are 5.20 132.08 2.50 63.50 1.80 45.72 5.04 128.02 2.00 50.80 0.78 19.81

MV-20-08-0612 3.9 55.8 1/2” 3/4” Parfl are 5.35 135.89 2.50 63.50 2.00 50.80 5.24 133.10 2.00 50.80 0.83 20.96

MV-20-16-0612 6.4 91.5 1” 3/4” Parfl are 6.22 157.99 3.38 85.85 2.88 73.15 7.05 179.07 3.00 76.20 1.00 25.40

MV-20-16-0616 10.9 155.4 1” 1” Parfl are 6.98 177.29 3.38 85.85 2.88 73.15 7.05 179.07 3.00 76.20 1.00 25.40

MV-20-16-0620 13.5 192.9 1” 1 1/4” Parfl are 8.07 204.98 3.75 95.25 3.25 82.55 7.43 188.72 3.00 76.20 1.25 31.75

MV-20-04-0604-MT-P* .20 2.8 1/4” MULTI-TURN

PANEL MOUNT

1/4” Parfl are 3.55 90.17 1.25 31.75 1.15 29.21 2.63 66.80 1.25 31.75 0.50 12.70

MV-20-04-0606-MT-P .76 10.8 1/4” 3/8” Parfl are 3.96 100.58 1.50 38.10 1.15 29.21 2.63 66.80 1.25 31.75 0.50 12.70


ARE IN mm.


34

FeaturesPrecision machined

diaphragm

manufactured from






Tongue and groove seal

for positive diaphragm

to body seal.

Compact design

actuator works on as

little as 20 psi.


Lower replacement

costs.

Less downtime.

Isolates media from

actuator.

Ease of installation and

maintenance.


Non-wetted: Anodized Aluminum, SS, Nitrile


Back: 25” HG vacuum (846 mbar) to 20 PSIG (1.4 bar)

Actuator: 20 PSIG (1.4 bar) to 120 PSIG (8.3 bar)



page 3.


Fluid: -60° - 400° F (-51° - 204° C)

Product OverviewThe PV-1 PTFE Miniature Diaphragm Valve is designed

for use in high purity semiconductor applications, and

is also ideally suited for ultra-pure water and aggressive

chemical systems. The design utilizes a machined modifi ed

PTFE body, seat and diaphragm ensuring excellent

fl exibility and long life. The valve is available in 2 and 3

way confi gurations. It is ideal for low fl ow and small dose

injection applications.

PV-1 Miniature Pneumatic Valve


35


ARE IN mm.

PV-1 Miniature Pneumatic Valve

/ 81

"RA

RG

P

PFA

PI

1/8" PARGRIP

10-32 UNF-2B

.38

.31 SQ.

Ø.50

B

.82

.23 SQ.

[ 7.94 ]

[ 5.72 ]

[ 9.53 ]

[ 12.64 ]

1/8" FNPT

.19[ 4.83 ]

[ 20.83 ]

rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroPnoisnemiD

B

4311-1-VP 80. 1.1 CN 490. TPNF"8/1 ]56.9[83.

30-4331-1-VP 80. 1.1 YAW3 490. TPNF"8/1 ]56.9[83.

4312-1-VP 80. 1.1 CN 490. pirgraP"8/1 ]31.8[23.

30-4332-1-VP 80. 1.1 YAW3 490. pirgraP"8/1 ]31.8[23.

DE

LTA

-P (

psi

)

0

50

10

40

30

20

DE

LTA

-P (

bar

)

3.5

2.8

2.1

1.4

.70


.38 .76 1.1 1.5 2.31.9

FLOW RATE (gpm).10 .20 .30 .40 .60.50

All Configurations


36


machined diaphragms

manufactured from






Tongue and groove




to body seal.


steel spring.


Lower replacement

costs.

Less downtime.

Reduces effects of









page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Normally Closed shown

Product OverviewThe PV-10 PFA Diaphragm Valve is designed for use in

high purity semiconductor applications. It is also ideally



body with precision machined areas. A one piece machined


ibility and life. A full 1/4” orifi ce provides maximum fl ow

capability in a compact package.

PV-10 1/4” Pneumatic 2 Way Valve


37

1/4" PARFLARE

Ø1.75 [44.45]

IN

OU

T

.88 [22.35]

APDV

F 1/4"1/4"

ALF

RE

P R

1.54 [39.12]

1.23 [31.24]

1.12 [28.45]


1.13 [28.70]

1/4" FNPT

.56 [14.22]

PVDF SCREWCOVER

-10

HEX NUTW/ STUD

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN OUT

SCREW

Ø1.250BOLT CIRCLE

MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)

1.25 [31.78]

1.15 [29.21]

.31 [7.87]


ARE IN mm.




)evobAdetcipeD(

XX-4411-01-VP 06. 6.8 CN TPNF"4/1

wercS=00erauqS08.dutS/wercS=10

elcriCtloB52.1ØdutS/wercS=20srevoCwercSFDVP=01

XX-4421-01-VP 06. 6.8 ON TPNF"4/1XX-4312-01-VP 42. 4.3 CN pirgraP"4/1XX-4322-01-VP 42. 4.3 ON pirgraP"4/1XX-6412-01-VP 26. 8.8 CN pirgraP"8/3XX-6422-01-VP 26. 8.8 ON pirgraP"8/3XX-4216-01-VP 02. 8.2 CN eralfraP"4/1XX-4226-01-VP 02. 8.2 ON eralfraP"4/1XX-6416-01-VP 26. 8.8 CN eralfraP""8/3XX-6426-01-VP 26. 8.8 ON eralfraP""8/3


DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5


1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]


01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP


38


machined diaphragms

manufactured from the

latest technology modifi ed

PTFE. Provides over fi ve

times the fl exural life as

compared to conventional

PTFE. Tongue and groove


positive through fl ow shut

off and diaphragm to body

seal.


steel springs.


Lower replacement costs.

Less downtime.

Reduces effects of









page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Product OverviewThe PV-10 PFA 3 Way Diaphragm Valve is designed for use




body with precision machined areas. One piece machined

modifi ed PTFE diaphragms are also utilized for excellent

fl exibility and life. A full 1/4” orifi ce provides maximum fl ow




39

1.23 [31.24]

1.12 [28.45]


1.13 [28.70]

1/4" FNPT

.56 [14.22]

PVDF SCREWCOVER

-10

HEX NUTW/ STUD

.40 [10.16]

[31.75]

-02

.40 [10.16]

.40 [10.16]

-01

.40 [10.16]

-00

IN OUT

SCREW

Ø1.250BOLT CIRCLE

MOUNTINGCONFIGURATIONS(PV-10-XXXX-XX)

Ø1.75 [44.45]

.63 [15.90]

1.54 [39.12]

COMNC NO

.88 [22.35]

AAFFLLAA

RRPPFF

VV

EERR

PPDD

1/4"1/4"

1/4" PARFLARE

1.25 [31.78]

1.15 [29.21].31

[7.87]AIR PORT CONNECTION, 1/8” FNPT


ARE IN mm.



)evobAdetcipeD(

XX-4431-01-VP 06. 6.8

YAW3

TPNF"4/1wercS=00


srevoCwercSFDVP=01

XX-4332-01-VP 42. 4.3 pirgraP"4/1XX-6432-01-VP 26. 8.8 pirgraP"8/3XX-4236-01-VP 02. 8.2 eralfraP"4/1XX-6436-01-VP 26. 8.8 eralfraP""8/3


DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5



01-BS )yletarapesdloS(.ylnosledom01-XXXX-01-VPdna00-XXXX-01-VPhtiwesuroF.esaBgnitnuoMni-panSFDVP

1.53 [38.86]

.76 [19.3]

2X .19 [4.83]2X .15 [3.81] 2X R.08 [2.03]

SLOT TYP.

1.25 [31.75] SQ.

.50 [12.7]

.20 [5.08]


40


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.

Submergible option

isolates all valve

components from the



Lower replacement

costs.

Less downtime.

Reduces effects of





environments.




Back: 80 PSIG (5.5 bar) with 80 PSIG (5.5 bar) inlet pressure

Actuator: 60 PSIG (4.2 bar) to 100 PSIG (7 bar)



page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Normally Closed Shown

Product OverviewThe PV-11 PFA Diaphragm Valve is designed for use in

high purity semiconductor applications. It is also ideally



body with precision machined areas. A one piece machined


ibility and life. A full 1/2” orifi ce provides maximum fl ow




41




ARE IN mm.


110-11-VP 3.2 8.23

ON

eralfraP"2/1

210-11-VP 7.3 8.25 eralfraP"4/3

310-11-VP 7.3 8.25 dnobraP"2/1

410-11-VP 7.3 8.25 dnobraP"4/3

510-11-VP 7.3 8.25 TPNF"2/1

100-11-VP 3.2 8.23

CN

eralfraP"2/1

200-11-VP 7.3 8.25 eralfraP"4/3

300-11-VP 7.3 8.25 dnobraP"2/1

400-11-VP 7.3 8.25 dnobraP"4/3

500-11-VP 7.3 8.25 TPNF"2/1

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113


CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 25

45

50

90

75

135

100

180

125

225

150

270

3.1

6.2

9.3

12.4

15.5

18.61.7 3.4 5.2 6.9 8.6 10.3


2X .26 [6.60]

1.81 [46.05]

2.02 [51.33]

.55 [14.00]

2.05 [52.10]

2.02 [51.33]

1.63 [41.35]

1.56 [39.65]

.75 [19.05]

2.36 [59.94]

1.74 [44.17]

2.31 [58.75]

3.74 [94.87]

Ø2.90[Ø73.66]


1/2" FNPT 3/4" PARFLARE

1/2" PARFLARE

OUT OUT

OUT OUT

IN

AIR

TEST


42


machined diaphragms

manufactured from






Tongue and groove




to body seal.


steel springs.

Submergible option

isolates all valve

components from the


Multi-position mounting

base.


Lower replacement

costs.

Less downtime.

Reduces effects of





environments.

Allows for more

mounting fl exibility

and connector fi tting

reduction.



Pressure RangesCOM to NO: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

NO to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)

COM to NC: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar)


NC to COM: 27” HG vacuum (913 mbar) to 80 PSIG (5.5 bar)





page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Product OverviewThe PV-11 PFA 3 Way Diaphragm Valve is designed for use




body with precision machined areas. One piece machined

modifi ed PTFE diaphragms are also utilized for excellent

fl exibility and life. A full 1/2” orifi ce provides maximum fl ow




43

.57 [14.40]

NO

2.01 [50.93]

3/4" PARFLARE

1/2" FNPT

NO

2.88 [73.03]

2.06 [52.25]

1/2" PARBOND

2.06 [52.25]

NO

3/4" PARBOND

NCNC NONO

2.56 [65.10]

3.18 [80.87]

Ø1.636 [41.55]

Ø 2.93[74.42]

4.54 [115.42]

[46.20]

1.28 [32.47]

1/2" PARFLARE

*MOUNTING RING

2X Ø .26[6.60]

1.58 [40.18]




ARE IN mm.



120-11-VP 9.1 1.72

YAW3

eralfraP"2/1220-11-VP 8.2 0.04 eralfraP"4/3320-11-VP 8.2 0.04 dnobraP"2/1420-11-VP 8.2 0.04 dnobraP"4/3520-11-VP 8.2 0.04 TPNF"2/1


*To order part without mounting ring add -01 to model number.


FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113



44

FeaturesPrecision machined

diaphragm

manufactured from


modifi ed PTFE.

Provides over fi ve

times the fl exural

life as compared to

conventional PTFE.

Tongue and groove




to body seal.


steel spring.

Bypass integral to valve

body to prevent stagna-

tion of ultra-pure water.

Modifi ed fl ow

confi gurations

with numerous end

connections including

Parfl are available.


Lower replacement

costs.

Less downtime.

Reduces effects of

corrosive environment.

Prevents contamination

of media.


mounting space, and

overall cost.



Pressure RangesForward: 27” HG vaccum (913 mbar) to 80 PSIG (5.5 bar)





Pressure ranges for operation at ambient temperatures. For

use at higher temperatures consult Pressure/Temperature chart

on page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Product OverviewThe PV-11 Adjustable Bypass Valve is designed for use in

ultra-pure water applications. The design utilizes a molded

high purity PFA body with precision machined seats. A

machined modifi ed PTFE diaphragm is also utilized for

excellent fl exibility and life. The integral bypass valve

prevents the stagnation and deadheading of media in an

ultra-pure water system.

PV-11 1/2” Pneumatic Adjustable Bypass Valve


45

.57 [14.40]

NO

2.01 [50.93]

1/2" FNPT

3/4" PARFLARE

1.65 MAX.[41.97]

OUTLET

NONC

1.58 [40.18]

Ø1.636 [41.55]

INLET

3.18 [80.87]

2.56 [65.10]

1/2" PARFLARE

MOUNTING DETAIL

DVP

/F

1

AR

LPA

RF

" 2

E

4.54 [115.42]

1.82 [46.20]

1.28 [32.47]

2.88 [73.03]

2X Ø .26[Ø 6.60]

Ø 2.93[Ø 74.42]




ARE IN mm.

PV-11 1/2” Pneumatic Adustable Bypass Valve


103-11-VP 9.1 1.72CN

eralfraP"2/1203-11-VP 8.2 0.04 eralfraP"4/3503-11-VP 8.2 0.04 TPNF"2/1



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 5

4

10

8

15

12

20

16

25

20

30

24

.28

.56

.84

1.12

1.40

1.6519 38 57 76 95 113


Cv / Kv vs. TURNS FOR BYPASS PORT

TURNS

Cv

Kv

0 0.6

.02

1.2

.04

1.8

.06

2.4

.08

3.0

.10

3.6

.12

.29

.57

.86

1.14

1.43

1.71

All Configurations


46


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.

Submergible option

isolates all valve

components from the



Lower replacement

costs.

Less downtime.

Reduces effects of





environments.



Pressure RangesForward: 27” HG vaccum (913 mbar) to 100 PSIG (7 bar)

Backward: 80 PSIG (5.5 bar) with 100 PSIG (3.4 bar) inlet pressure

100 PSIG (7 bar) with 60 PSIG (4.2 bar) inlet pressure




page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Normally Closed shown

Product OverviewThe PV-12 Diaphragm Valve is designed for use in high


for ultra-pure water and aggressive chemical or gas appli-

cations. The design utilizes a molded high purity PFA body

with precision machined seat and diaphragm sealing areas.

A one piece machined modifi ed PTFE diaphragm is also

utilized for excellent fl exibility and life. A full 1” orifi ce pro-

vides maximum fl ow capability in a compact package.

PV-12 1” Pneumatic 2 Way Valve


47

1.07[27.23]

4.00 [101.70]

2.59 [65.86]

PARFLARE 1"

Ø4.22 [Ø107.19]

2X Ø.28 [Ø7.11]

3.75 [95.35]

1.88 [47.68]

1" PARBOND

4.28 [108.81]

2.56 [65.00]

5.78 [146.81]

.323 [82.04]

(N.O. ONLY)

2.32 [58.85]

PARBOND 3/4"

AIR AND TEST PORT

CONNECTIONS, 1/8” FNPT


ARE IN mm.

PV-12 1” Pneumatic 2 Way Valve

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP

100-21-VP 7.51 2.422

CN

dnobraP"1

200-21-VP 3.31 9.981 eralfraP"1

300-21-VP 6.9 8.241 dnobraP"4/3

rebmuNledoM CV KV .gifnoCwolF .gifnoCtroP

500-21-VP 7.51 2.422

ON

dnobraP"1

600-21-VP 3.31 9.981 eralfraP"1

700-21-VP 6.9 8.241 dnobraP"4/3



FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227

3/4" Parbond 1" Parflare1" Parbond


48

Product OverviewThe PV-16 PFA diaphragm valve is designed for use in






is also utilized for excellent fl exibility and life. A full 3/4”

orifi ce provides maximum fl ow capability in a compact

package.

PV-16 3/4” Pneumatic PFA 2 Way Valve


machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.


Lower replacement

costs.

Less downtime.

Reduces effects of





Actuation: 60 PSIG (4.1 bar) - 120 PSIG (8.3 bar)



on page 3.


Fluid: 0° - 266° F (-17° - 130° C)


49

Ø4.38 [Ø111.3 mm]

4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]


2.73 [69.3 mm]

3.43 [87.1 mm]

1.70 [43.2 mm]

5.28 [134.0 mm]

A




ARE IN mm.

Parfl are model numbers are supplied with PVDF nuts. Also available with PFA (-T) nuts.

*Ends are fused on.


rebmuNledoM CV KV X-noitarugifnoCwolF noitarugifnoCtroP]mm[ninoisnemiD

A

216X-61-VP 8.5 7.28

CN=1ON=2

eralfraP"4/3 ]27.041[45.5

10-216X-61-VP 8.5 7.28 gnoLeralfraP"4/3 ]95.461[84.6

616X-61-VP 9.7 6.211 *eralfraP"1 ]56.132[21.9

217X-61-VP 9.7 6.211 dnobraP"4/3 ]68.941[09.5

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227



50

Product OverviewThe PV-16 PFA diaphragm valve is designed for use in






is also utilized for excellent fl exibility and life. A full 3/4”

orifi ce provides maximum fl ow capability in a compact

package.



machined diaphragm

manufactured from






Tongue and groove




to body seal.


steel spring.


Lower replacement

costs.

Less downtime.

Reduces effects of








on page 3.


Fluid: 0° - 266° F (-17° - 130° C)


51

5.53 [140.6 mm]

Ø4.38 [Ø111.3 mm]

Ø3.75 [Ø95.3 mm]

4X .28[7.1 mm]


3.39 [86.2 mm]2.69

[68.4 mm]1.66

[42.2 mm]

AB




ARE IN mm.


*Ends are fused on.


rebmuNledoM CV KV noitarugifnoCwolF noitarugifnoCtroP

snoisnemiD

A B

2163-61-VP 4.5 0.77

YAW3

CNMOC

ON

eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

10-2163-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2

6163-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4

2173-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2

2164-61-VP 4.5 0.77

stroPdesreveRYAW3

ONMOC

CN

eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

10-2164-61-VP 4.5 0.77 gnoLeralfraP"4/3 ]mm95.461["84.6 ]mm73.17["18.2

6164-61-VP 3.7 1.401 *eralfraP"1 ]mm56.132["21.9 ]mm28.511["65.4

2174-61-VP 3.7 1.401 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47["59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi

)

DE

LTA

-P (

bar

)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.238 76 113 151 189 227



52

Product OverviewThe PV-16 PFA sampling valve is designed for use in high

purity semiconductor applications, and is also ideally

suited for ultra-pure water and aggressive chemical or

gas applications. The design utilizes a molded high purity

PFA body with precision machined seat and diaphragm

sealing areas. A one piece machined modifi ed PTFE dia-

phragm is also utilized for excellent fl exibility and life. The

valve incorporates a full fl ow through port with a low dead

volume down leg.

PV-16 3/4” Pneumatic PFA Sampling Valve


machined diaphragm

manufactured from







steel spring.



Lower replacement

costs.

Less downtime.

Reduces effects of









on page 3.


Fluid: 0° - 266° F (-17° - 130° C)


53

2.73 [69.3 mm]

3.43 [87.1 mm]

Ø4.38 [Ø111.3 mm]

1.70 [43.2 mm]

5.28 [134.0 mm]


4X .28[7.1 mm]

Ø3.75 [Ø95.3 mm]

AB




ARE IN mm.


PV-16 3/4” Pneumatic PFA Sampling Valve

rebmuNledoM

troPhguorhT troPelpmaS

troPhguorhT troPelpmaS

snoisnemiD

vC vK vC vK A B

806-2165-61-VP 0.31 4.581 3.2 8.23 eralfraP"4/3 eralfraP"2/1 ]mm27.041["45.5 ]mm38.86["17.2

216-2165-61-VP 0.31 4.581 6.4 6.56 eralfraP"4/3 eralfraP"4/3 ]mm27.041["45.5 ]mm73.17["18.2

217-2165-61-VP 0.31 4.581 9.6 7.89 eralfraP"4/3 dnobraP"4/3 ]mm27.041["45.5 ]mm39.47[59.2

806-2175-61-VP 2.52 29.953 3.2 8.23 dnobraP"4/3 eralfraP"2/1 ]mm68.941["09.5 ]mm38.86["17.2

216-2175-61-VP 2.52 29.953 6.4 6.56 dnobraP"4/3 eralfraP"4/3 ]mm68.941["09.5 ]mm73.17["18.2

217-2175-61-VP 2.52 29.953 9.6 7.89 dnobraP"4/3 dnobraP"4/3 ]mm68.941["09.5 ]mm39.47[59.2

CRACKING PRESSURE



PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(p

si)

PR

ES

SU

RE

TO

OU

TL

ET

PO

RT

(b

ar)

0 24

24

48

48

72

72

96

96

120

120

144

144

1.7

3.3

5.0

6.6

8.3

9.91.7 3.3 5.0 6.6 8.3 9.9



54

Product OverviewThe PV-20 distribution valve is designed for use in slurry

applications, and is also ideally suited for ultra-pure water

and aggressive chemical or gas applications. The design


seat and diaphragm sealing areas. The valve is offered in

3 orifi ce sizes (1/4”, 1/2” and 1”) and port sizes ranging

from 1/4” to 1 1/4”.

PV-20 1/4” - 1” Pneumatic PTFE Distribution Valve

FeaturesFully swept open bowl

diaphragm seat area.

Self draining design.

High load point seat seal.

Angled and rounded internal

fl ow path.

One piece precision

machined diaphragm

manufactured from modifi ed

PTFE.

Evenly distributed seat

sealing forces.

Maximized diaphragm

thickness.

Benefi tsMinimizes fl uid shear and

smooth fl ow transition.

Minimizes area for

entrapment and stagnation

of media.

Improves sealing

mechanism for aggressive

chemicals, deionized water

and abrasive slurry media.

Minimizes particle

contribution of valve.

Provides faster purging and

cleaning of valve.

Less pressure drop

allows for lower pressure

requirements upstream.

Improves fl uid fl ow

dynamics.

Improves cycle life, less

shear than standard PTFE

material, lower replacement

costs, less downtime.

Minimized diaphragm and

valve seat strain.

Stabilizes valve back

pressure capability.

Minimizes potential

for permeation while

maximizing cycle life.



Pressure Ranges1/4” Orifi ce: 27” HG vacuum (913 mbar) - 80 PSIG (5.5 bar)

1/2” Orifi ce: 27” HG vacuum (913 mbar) - 100 PSIG (7 bar)

1” Orifi ce: 27” HG vacuum (913 mbar) - 100 PSIG (7 bar)




on page 3.


Fluid: 0° - 266° F (-17° - 130° C)


55

Parfl are models are supplied with PVDF nuts. For PFA nuts add -T to model number. Contact factory for Pillar end connections.

PV-20 1/4” - 1” Pneumatic PTFE Distribution Valve

C

A

H

G

1/4” ORIFICE: 10-32 UNF-2B ACTUATION PORT1/2” ORIFICE: 1/8“ FNPT ACTUATION PORT 1” ORIFICE: 1/8“ FNPT ACTUATION PORT

1/4” ORIFICE: 2X Ø.17 THRU, C.B. Ø.28 X .401/2” ORIFICE: 2X Ø.19 THRU, C.B. Ø.31 X .50

1” ORIFICE: 2X Ø.28 THRU, C.B. Ø.44 X 1.00

B

1/4-28 UNF LEAK DETECTION PORT

F

E

D


FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi)

DE

LTA

-P (

ba

r)

0 10

10

20

20

30

30

40

40

50

50

60

60

.7

1.4

2.1

2.8

3.5

4.2

38 76 113 151 189 227

PV

-20-0

8-X

608-R

PV-2

0-0

8-X

612-R

PV-2

0-1

6-X

612

PV-20-1

6-X616

PV-20-16-X620

FLOW RATE (lpm)

FLOW RATE (gpm)

DE

LTA

-P (

psi)

DE

LTA

-P (

ba

r)

0 1

5

2

10

3

15

4

20

5

25

6

30

.34

.69

1.0

1.4

1.7

2.1

3.8 7.6 11.3 15.1 18.9 22.7

PV

-20-0

4-X

604

PV-2

0-0

4-X

606

Part Number Cv KvBody

Size

Valve

Type

Port

Confi guration

A B C D E F G H

inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm

PV-20-04-1604 .20 2.8 1/4”

NC

1/4” Parfl are .18 4.57 .55 13.97 3.80 96.52 1.50 38.10 1.15 29.21 2.28 57.91 1.25 31.75 .50 12.70

PV-20-04-1606 .76 10.8 1/4” 3/8” Parfl are .18 4.57 .55 13.97 3.96 100.58 1.50 38.10 1.15 29.21 2.28 57.91 1.25 31.75 .50 12.70

PV-20-08-1608-R 2.4 34.2 1/2” 1/2” Parfl are .25 6.35 1.44 36.58 5.20 132.08 2.50 63.50 1.80 45.72 4.14 105.16 2.00 50.80 .78 19.81

PV-20-08-1612-R 3.9 55.8 1/2” 3/4” Parfl are .25 6.35 1.44 36.58 5.35 135.89 2.50 63.50 2.00 50.80 4.34 110.24 2.00 50.80 .83 20.96

PV-20-16-1612 6.4 91.5 1” 3/4” Parfl are .28 7.11 1.50 38.10 6.22 157.99 3.38 85.85 2.88 73.15 6.08 154.43 3.00 76.20 1.00 25.40

PV-20-16-1616 10.9 155.4 1” 1” Parfare .28 7.11 1.50 38.10 6.98 177.29 3.38 85.85 2.88 73.15 6.08 154.43 3.00 76.20 1.00 25.40

PV-20-16-1620 13.5 192.9 1” 1 1/4” Parfl are .28 7.11 2.00 50.80 8.07 204.98 3.75 95.25 3.25 82.55 6.45 163.83 3.00 76.20 1.25 31.75

PV-20-04-2604 .20 2.8 1/4”

NO

1/4” Parfl are .18 4.57 .55 13.97 3.80 96.52 1.50 38.10 1.15 29.21 2.28 57.91 1.25 31.75 .50 12.70

PV-20-04-2606 .76 10.8 1/4” 3/8” Parfl are .18 4.57 .55 13.97 3.96 100.58 1.50 38.10 1.15 29.21 2.28 57.91 1.25 31.75 .50 12.70

PV-20-08-2608-R 2.4 34.2 1/2” 1/2” Parfl are .25 6.35 1.44 36.58 5.20 132.08 2.50 63.50 1.80 45.72 4.14 105.16 2.00 50.80 .78 19.81

PV-20-08-2612-R 3.9 55.8 1/2” 3/4” Parfl are .25 6.35 1.44 36.58 5.35 135.89 2.50 63.50 2.00 50.80 4.34 110.24 2.00 50.80 .83 20.96

PV-20-16-2612 6.4 91.5 1” 3/4” Parfl are .28 7.11 1.50 38.10 6.22 157.99 3.38 85.85 2.88 73.15 6.08 154.43 3.00 76.20 1.00 25.40

PV-20-16-2616 10.9 155.4 1” 1” Parfare .28 7.11 1.50 38.10 6.98 177.29 3.38 85.85 2.88 73.15 6.08 154.43 3.00 76.20 1.00 25.40

PV-20-16-2620 13.5 192.9 1” 1 1/4” Parfl are .28 7.11 2.00 50.80 8.07 204.98 3.75 95.25 3.25 82.55 6.45 163.83 3.00 76.20 1.25 31.75


56

FeaturesPolished sealing

surfaces.

Tongue and groove

external seal.

Machined PTFE spring.

Numerous end confi gura-

tions available including

Parflare. Available with

different confi gurations

on either end.

Benefi tsLong life and superior

sealing characteristics.

Eliminates o-rings and

compatibility problems.

Low cracking pressure.


mounting space, and

overall cost.

Specifi cationsMaterials of ConstructionWetted: PTFE

Non-wetted: PFA, PVDF, ETFE

Cracking Pressure0.25 PSIG (.017 bar) - 0.75 PSIG (.052 bar)

Back Check Sealing Pressure5.0 PSIG (.35 bar)

Pressure Range27” Hg vacuum (913 mbar) - 120 PSIG (8.3 bar)



on page 3.

Temperature RangesStyle 1: 32° - 212° F (0° - 100° C) Ambient

32° - 266° F (0° - 130° C) Fluid

Style 2 & 3: 50° - 212° F (10° - 100° C) Ambient

50° - 266° F (10° - 130° C) Fluid

Style 4 & 5: 60° - 212° F (15° - 100° C) Ambient

60° - 266° F (15° - 130° C) Fluid

Product OverviewThe CV-1 PTFE Check Valve is designed for use in high


for ultra-pure water and aggressive chemical or gas appli-

cations. The design utilizes machined PTFE components

to provide superior chemical resistance and purity without

requiring o-rings for sealing. The machined PTFE spring

allows for low cracking pressure operation and minimal

back pressure for resealing.

CV-1 Check Valve


57

.75 [19.05]

.38 [9.65]

1/8" FNPT1/4" FNPT

1.13 [28.70]

1/4" PARGRIP 1/8" PARGRIP

3/8" FNPT

1.33 [33.76]

1/2" PARGRIP

.50 [12.70]

.50 [12.70]

1.15 [29.21]

STYLE 1

1.52 [38.61]

AR

PLFAR

1.23 [31.24]

3/8" PARFLARE

STYLE 2

1.43 [36.37]

1.35 [34.29]

PV

F/ 1

D

VP

D

LA

RF

ERP

"

A

1/2" PARFLARE

2

E

1/4" PARFLARE

F 1/4"

Ø1.48 [37.59]

Ø1.23 [31.24]

1.12 [28.45]

3/8" PARGRIP

Ø1.86 [47.24]

1/2" FNPT

STYLE 3

1.23 [31.24]

STYLE 4

2.16 [54.81]

Ø2.75 [69.85]

Ø3.25 [82.55]STYLE 5

3.27 [83.06]

3/4"

VP

DF

A

FL

RE

PR

A

3/4" PARFLARE

1.80 [45.72]

P

EAL

R

APR

1"F

FDV

1" PARFLARE

1" FNPT

.78 [19.81]

1.46 [37.08]

.63[16.00]

CV-1 Check Valve


BRACKETED DIMENSIONS ARE IN mm.

rebmuNledoM CV KV elytS noitarugifnoCtroP

2211-1-VC 16.0 87.8 1 TPNF"8/14411-1-VC 15.1 47.12 1 TPNF"4/16611-1-VC 34.2 00.53 2 TPNF"8/38811-1-VC 22.4 77.06 3 TPNF"2/1616111-1-VC 00.41 6.102 5 TPNF"1

2222-1-VC 20.0 92.0 1 pirgraP"8/14422-1-VC 43.0 09.4 1 pirgraP"4/16622-1-VC 89. 11.41 1 pirgraP"8/38822-1-VC 71.2 52.13 2 pirgraP"2/14466-1-VC 62. 47.3 1 eralfraP"4/16666-1-VC 11.1 48.51 1 eralfraP"8/38866-1-VC 30.2 32.92 2 eralfraP"2/1212166-1-VC 31.4 74.95 3 eralfraP"4/3616166-1-VC 58.11 6.071 4 eralfraP"1


58


Lower replacement

costs.

Less downtime.

Isolates media from

adjusting screw.

Prevent over

pressurization in critical

applications.


machined diaphragm

poppet manufactured

from the latest

technology modifi ed

PTFE.

Provides over fi ve

times the fl exural

life as compared to

conventional PTFE.

Tongue and groove seat

and diaphragm poppet

for positive through fl ow


to body seal.

Field adjustable relief

pressure.

Product OverviewThe RV Relief Valve is designed for use in high purity

semiconductor applications, and is also ideally suited for

ultra-pure water and aggressive chemicals. The design

utilizes a molded PFA body with precision-machined

PTFE seats and diaphragm poppet. When a fi eld set relief

pressure is reached, the valve opens and permits fl ow. The

valve resets when 25% of original setpoint is reached.


Non-wetted: PVDF, SS, Brass, ABS, HDPE

Pressure Ranges15 PSIG (1.03 bar) - 120 PSIG (8.3 bar)



on page 3.


Fluid: 0° - 266° F (-17° - 130° C)

RV Relief Valve

Note: The RV Series Relief Valves should only be used to protect

Article 3, Paragraph 3 category equipment as defi ned in Pressure

Equipment Directive 97/23/EC Dated 29, May 1997.


59


ARE IN mm.

RV Relief Valve

1.20 [30.36]

.92 [23.34]

1.15 [29.21]

.40 [10.16]

1/4" PARFLARE.40

[10.16]

.40 [10.16]

.40 [10.16] SCREW

1.23 [31.24]

3/8" PARFLARE 1/4" FNPT

.56 [14.22]

3.37 [85.60]

rebmuNledoM vC vK noitarugifnoCwolF noitarugifnoCtroP XX-egnaRerusserPgniveileR

XX-441-VR 87. 3.11

FFO/NO

TPNF"4/1GISP06ot51-10GISP021ot06-20XX-426-VR 42. 5.3 eralfraP"4/1

XX-646-VR 07. 2.01 eralfraP"8/3



60

SV-2 1/4” Solenoid Valve

Product OverviewThe SV-2 Solenoid Valve is designed for use in high purity

semiconductor applications, and is also ideally suited for

ultra-pure water and aggressive chemicals. The design

utilizes a molded high purity PFA body with precision

machined areas. A one-piece machined modifi ed PTFE

diaphragm is also utilized for excellent fl exibility and long

life. The valve is offered in 2 and 3 way confi gurations, in

3 orifi ce sizes, and in 2 standard voltages.


machined diaphragm

manufactured from


modifi ed PTFE.

Provides over fi ve

times the fl exural

life as compared to

conventional PTFE.

Tongue and groove




to body seal.


Lower replacement

costs.

Less downtime.

Isolates media from

solenoid.


Non-wetted: Coated Aluminum, Plated Steel, SS, PFA, PVDF, Titanate

Pressure RangesForward: 0 - 80 PSIG (5.5 bar)



on page 3.


Fluid: 0° - 266° F (-17° - 130° C)

Solenoid Ratings24 VDC, 115 VAC (Double Wire)

All models rated at 12.88 watts for 24 VDC and 14 watts for 115

VAC at ambient temperature.

Coil Duty Cycle: 100%, however, 100% continuous duty may

affect performance of valve, therefore 50% continuous duty is

recommended.

OrientationAll models must be mounted vertically as indicated by the label

on the product.


61

SV-2 1/4” Solenoid ValveBRACKETED DIMENSIONS

ARE IN mm.

OU

TNIINO

COM

NC

.87 [22.14]

1.25 C/L

.40 [10.16]

.57 [14.35]

Ø1.65

SCREW

.40 [10.16]

.40 [10.16]

[31.75]Ø

1.24 [31.51]

3.97 [100.93]

.40 [10.16]

1/4" FNPT

3-WAY VALVE 2-WAY VALVE

rebmuNledoM CV KV noitarugifnoCwolF eziSecifirO noitarugifnoCtroP X-egatloVdioneloS

X-4411-2-VS 06. 6.8 CN 052. TPNF"4/1CDV42=2CAV511=7

X-4421-2-VS 06. 6.8 ON 052. TPNF"4/1X-4431-2-VS 06. 6.8 YAW3 052. TPNF"4/1

DE

LTA

-P (

psi

)

0

25

5

20

15

10

DE

LTA

-P (

bar

)

1.72

1.38

1.03

.69

.34


1.9 3.8 5.7 7.6 11.39.5

FLOW RATE (gpm)0.5 1.0 1.5 2.0 3.02.5

All Configurations


62

1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and condi-tions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any accep-tance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writ-ing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer, Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived un-less Seller receives notice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from Parker Hannifi n Corporation. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WAR-RANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHAT-SOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED.NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INC.LUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, IN-CLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifi cations for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modifi cation or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modifi cation or cancellation shall be at Seller’s discretion, and shall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fi xtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.

8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confi dential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured us-ing such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specifi ed in whole or part by Buyer, or infringements resulting from the modifi cation, com-bination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intel-lectual Property Rights.If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specifi ed in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter ‘Events of Force Majeure’). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fi res, fl oods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifi cations and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues. 9/91-P

The items described in this document and other documents or descriptions provided by Parker Hannifi n Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifi n Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items, when communicated to Parker Hannifi n Corporation, its subsidiary or an authorized distributor (“Seller”) verbally or in writing, shall constitute acceptance of this offer.

Offer of Sale

Parker’s Charter

To be a leading worldwide manufacturer of compo-

nents and systems for the builders and users of durable

goods. More specifi cally, we will design, market and

manufacture products controlling motion, fl ow and pres-

sure. We will achieve profi table growth through premier

customer service.

Product Information

North American customers seeking product infor mation,

the location of a nearby distributor, or repair services will

receive prompt attention by calling the Parker Product

Information Center at our toll-free

number: 1-800-C-PARKER (1-800-272-7537). In

Europe, call 00800-C-PARKER-H (00800-2727-5374).

The Fluid Connectors Group designs, manu factures and mar-kets rigid and fl exible connec-tors, and associated products used in pneumatic and fl uid systems.

The Hydraulics Group designs, produces and markets a full spectrum of hy-raulic com ponents and systems to builders and users of industrial and mobile machinery and equipment.

The Automation Group is a leading supplier of pneu-matic and electro mechanical components and systems to automation customers world-wide.

The Seal Group designs, manu-factures and distributes indus-trial and commercial sealing devices and related products by providing superior quality and total customer satisfaction.

The Filtration Group designs, manufactures and markets quality fi ltration and clarifi cation products, providing customers with the best value, quality, technical support, and global availability.

The Instrumentation Group is a global leader in the design, manufacture and distribution of high-quality critical fl ow com-ponents for worldwide process instrumentation, ultra-high-purity, medical and analytical applications.

About Parker Hannifi n Corporation

Parker Hannifi n is a leading global motion-control

company dedicated to delivering premier customer

service. A Fortune 500 corporation listed on the New

York Stock Exchange (PH), our components and sys-

tems comprise over 1,400 product lines that control

motion in some 1,000 industrial and aerospace mar-kets.

Parker is the only manufacturer to offer its customers a

choice of hydraulic, pneumatic, and electro mechan ical

motion-control solutions. Our Company has the largest

distribution network in its fi eld, with over 7,500 distribu-

tors serving nearly 400,000 customers worldwide.

Parker Hannifi n Corporation6035 Parkland Blvd.Cleveland, Ohio 44124-4141Telephone: (216) 896-3000Fax: (216) 896-4000www.parker.com

Parker Hannifi n Corporation

The Aerospace Group is a leader in the development, de-sign, manufacture and servicing of control systems and compo-nents for aerospace and related high- technology markets, while achieving growth through pre-mier customer service.

The Climate & Industrial Con-trols Group designs, manufac-tures and markets system-con-trol and fl uid-handling components and sys-tems to refrigeration, air-condi-tioning and industrial customers worldwide.

Parker Hannifi n CorporationVerifl o Division

Partek Operation

7075 East Southpoint RoadTucson, AZ 85706phone 520 574 2600fax 520 574 2700www.parker.com

© 2008 Parker Hannifi n Corporation

parker valves

Documents