industrial hose 2016 product catalog - texas rubber...

Industrial Hose 2016 Product Catalog

(High Pressure Air Hose)

www.contitech.us

Application Warning

The products in this catalog have been tested under controlled laboratory conditions to meet specific test criteria. These tests are not intended to reflect the performance of the product or any other material in any specific application, but are intended to provide the user with application guidelines. The products are intended for use by knowledgeable persons having the technical skills necessary to evaluate their suitability for specific applications.

Since Continental ContiTech, Inc. has no control over the number and variety of applications for which its products may be purchased or the conditions under which its products may be used by others, Continental ContiTech assumes no responsibility for performance results and applications. This catalog, however, contains available information to allow the user to determine the product’s acceptability and fitness for specific applications. No statement contained herein shall be construed as a license to operate, or as a recommendation or inducement to infringe existing patents or as an endorsement of products of specific manufacturers or systems.

Failure to follow procedures for selection, installation, care, maintenance and storage of hoses may result in the hose’s failure to perform properly and may result in damage to property and/or serious injury. Please refer to the General Information section of the catalog for hose care, maintenance and storage information.

All product design, dimensional and general information in this catalog is subject to change without prior notice. Working pressures and other technical information have been prepared from actual test results and other data considered to be reliable. However, Continental ContiTech assumes no responsibility for the accuracy of this information under varied conditions found in field use.

Chemical Hose

Do not use chemical hose at temperatures or pressures above those recommended by the manufacturer. All operators must be thoroughly trained in the care and use of this hose and must, at all times, wear protective clothing. A hose or system failure could cause the release of poisonous, corrosive or flammable material.

Detailed information concerning storage, care and maintenance may be found in the Hose Handbook published by the Rubber Manufacturer’s Association, 1400 K Street, N.W., Washington, D.C. 20005 and in SAE Recommended Practices J1273.

1 2016 Industrial Hose Catalog Application Warning

Table of Contents

Introduction

Continental ContiTech Industrial Hose

345

High Pressure Air

GorillaSteel AirNeptune 1500

2016 Industrial Hose Catalog Table of Contents

Gorilla®

Product Specifications

ApplicationA premium-quality, multipurpose industrial hose with a wide

range of applications in factories, construction, agriculture,

quarries, mines, railroads, the oil and gas industry, and

shipbuilding. All sizes are rated at 500 psi (3.4 MPa)

maximum working pressure. Non-conductive, minimum

electrical resistance greater than one (1) megaohm per inch

of hose length at 1000 Volts DC.

Construction TubeNitrile synthetic rubber, RMA Class A (High Oil Resistance)

CoverYellow Carbryn™ synthetic rubber, RMA Class A (High Oil

Resistance) MSHA approved

ReinforcementSpiral aramid yarn, 2” is braided synthetic yarn

Temperature Range-20˚F to 190˚F (-29˚C to 88˚C)

Packaging

90% one piece reels up to 1 inch

Gorilla®

SAP # ID Nom OD Max. WP Weight

Yellow in. mm in. mm psi MPa lb./ft. kg/m

20026239 1/4 6.4 0.61 15.5 500 3.45 0.17

20026255 5/16 7.9 0.69 17.5 500 3.45 0.20 0.30

20026256 3/8 9.5 0.73 18.6 500 3.45 0.22

20026273 1/2 12.7 0.89 22.6 500 3.45 0.28 0.42

20026289 5/8 15.9 1.06 26.9 500 3.45 0.35 0.52

20026290 3/4 19.1 1.19 30.2 500 3.45 0.41

20026304 1 25.4 1.50 37.8 500 3.45 0.58 0.86

20026306 1¼ 31.8 1.77 45.6 500 3.45 0.79

20026309 1½ 38.1 2.04 51.8 500 3.45 0.86 1.27

20023183 2 50.8 2.62 66.6 500 3.45 1.22 1.82

1” – 450’ reels, maximum 3 pieces, 50’ increments

Continental ContiTech. Flame Resistant USMSHA No. 2

CouplingsContact fitting manufacturer for proper fitting

recommendation and coupling procedure.

Order Codes569-035

536-446 (2”)

3/16”– 3/4” – 500’ reels, maximum 3 pieces, 50’ increments

1¼” – 250’–400’ reels, maximum 3 pieces, 50’ increments

1½” – 150’–300’ reels, maximum 3 pieces, 50’ increments

2” – 200’ carton, maximum 3 pieces, 50’ increments

Coupled assemblies available: 1/4”, 3/8”, 1/2”, and 3/4”.

Example: Gorilla® 1” (25.4 mm) 500 psi. Made in U.S.A

0.2

0.3

0.61

1.18

3 Air & Multipurpose General Purpose

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

Steel Air


ApplicationA heavy-duty, wrapped finish, single wire-braid or spiral ply

wire air hose for higher pressure service in severe industrial

applications, including service in mines, quarries and

construction jobs.

Construction TubeBlack Nitrile synthetic rubber, RMA Class B

CoverYellow Chemivic™ synthetic rubber (wrapped impression),

RMA Class B, MSHA approved

ReinforcementBraided (1) steel wire (1/2”-1f”). Spiral-plied steel wire (2”-4”)


Packaging50’ and 100’ length, coiled

BrandingExample: Continental ContiTech Steel Air 500 psi 3.4 MPa

2” 50.8 mm


recommendation and coupling procedure.

Steel AirOrder Codes: 539-159 (1/2"-1f"), MSHA 2G-IC-14C/38

SAP # ID Nom. OD Max. WP Weight


20174720 1/2 12.7 0.91 23.1 750 5.17 0.34 0.51

20174724 3/4 19.1 1.14 29.0 750 5.17 0.45 0.67

20174775 1 25.4 1.45 36.6 750 5.17 0.66 1.00

20174776 1e 31.8 1.81 46.0 500 3.45 0.98 1.46

20317183 1f 38.1 1.98 50.2 500 3.45 0.97 1.44

Steel AirOrder Codes: 549-209 (2"-4"), MSHA IC 11/7



20316409 2 50.8 2.66 67.6 500 3.45 1.59 2.36

20317186 2f 63.5 3.33 84.6 500 3.45 2.63 3.91

20316204 3 76.2 3.81 96.8 500 3.45 3.07 4.57

Also available with EPDM synthetic rubber tube and cover where superior heat resistance is more important than oil resistance.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

4 Air & Multipurpose Heavy Duty

Neptune™ 1500


ApplicationFor pressure washer equipment, agricultural sprayers and

high-pressure air lines.

Construction TubeNitrile synthetic rubber

CoverBlue, Gray, Red, Yellow or Black oil-resistant synthetic rubber,

RMA Class B (Medium Oil Resistance)

ReinforcementBraided (1) synthetic yarn up through 1/2". Braided (2)

synthetic yarn for 3/4"


Packaging1/4" -5/16" – 550’ to 750' reels, max 8 pieces, 25’ minimum

3/8"-500' reels, max 3 pieces, 50’ increments

1/2" -3/4" – 450’ to 550' reels, max 5 pieces, 10’ minimum

BrandingExample: Continental ContiTech Neptune™ 1500 3/8” 1500

psi WP. Made in U.S.A.


recommendation and coupling procedure. Coupled lengths

with MxMS fittings and Kink Guards available.

Order Codes536-374 (blue)

536-387 (gray)

536-388 (black)

536-490 (yellow)

Neptune™ 1500


Blue Gray Black Yellow in. mm in. mm psi MPa lb./ft. kg/m

20449806 20023093 20023102 1/4 6.4 0.59 15.0 1500 10.34 0.11 0.16

20023106 5/16 7.9 0.69 17.5 1500 10.34 0.15 0.22

20142362 20023096 20023109 20029580 3/8 9.5 0.75 19.1 1500 10.34 0.18 0.27

20590578 20023099 20023116 1/2 12.7 0.84 21.3 1200 8.27 0.19 0.28

Note: Not recommended for steam service.

Neptune™ 1500 in 1/2" ID size is rated at a working pressure rating of 1200 psi. All other sizes listed above are rated at a working pressure of 1500 psi.

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

5 Cleaning Equipment

Notes

6 Appendix C

Air & Multipurpose

General Purpose

Heavy Duty

Push-on

Chemical Transfer

Cleaning Equipment

Food

Transfer

Washdown

Marine

Material Handling

Abrasives

Bulk Transfer

Cement & Concrete

Mining

Petroleum

Aircraft Fueling

Dispensing

Dock

Transfer

Spray

Steam

Vacuum

LPG Delivery

Water

Discharge

Suction & Discharge

Washdown

Welding

Coupling Systems

Equipment

Appendix

207

817

53

ContiTech. Engineering Next Level

As a division of the Continental Group, ContiTech is a recognized innovation and technology leader in natural rubber and plastics. As an industry partner with a firm future ahead of us, we engineer solutions both with and for our customers around the world. Our bespoke solutions are specially tailored to meet the needs of the market. With extensive expertise in materials and processes, we are able to develop cutting-edge technologies while ensuring we make responsible use of resources. We are quick to respond to important technological trends, such as function integration, lightweight engineering and the reduction of complexity, and offer a range of relevant products and services. That way, when you need us, you’ll find we’re already there.

The content of this publication is not legally binding and is provided as information only. The trademarks displayed in this publication are the property of Continental AG and/or its affiliates. Copyright © 2016 ContiTech AG. All rights reserved. For complete information go to: www.contitech.de/discl_en

ContactContiTech NAFTA Headquarters703 S. Cleveland Massillon RoadFairlawn, OH 44333-3023 U.S.A.1-800-235-4632

Canada1-888-275-4397FAX 1-888-464-4397

Mexico1-800-439-7373FAX 1-800-062-0918

www.contitech.us

B-1EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Air

and

Mul

tipur

poseAir and Multipurpose

High Pressure

H6009 BULLDOG GOLD™ . . . . . . . . . . . . . . . . . . . . . . B-5

H6008 BULLDOG YELLOW JACK™ . . . . . . . . . . . . . . . . B-6

EHA500 High Pressure Air . . . . . . . . . . . . . . . . . . . . . . . B-7

H9622 Contractors Air . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

Air

and

Mul

tipur

pose

B-2 EATON Industrial Hose Master Catalog – NA E-HOOV-MC003-E2 2014

Air and M

ultipurpose

Air and Multipurpose

High Pressure H6009 BULLDOG GOLD™

Application: Air-operated equipment, boring and miningTube: Nitrile (RMA Class A) Reinforcement: 1-, 2- and 3-wire braid Cover: Pin-picked Carboxylated nitrileTemp: -40°C to +121°C (-40°F to +250°F)Pressure: 35-70 bar / 500-1000 psi

H6008 BULLDOG YELLOW JACK™

Application: Power drills, boring, mining and air-operated equipmentTube: Vinyl nitrile, (RMA Class A) Reinforcement: 1-, 2- & 3-wire braid Cover: Neoprene MSHA approvedTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 28-103 bar / 400-1500 psi

EHA500 High Pressure Air

Application: High-pressure airTube: Oil-resistant nitrile blend Reinforcement: High-tensile steel wire Cover: Synthetic rubberTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 41 bar / 600 psi

H9622 Contractors Air

Application: Power drills, boring, mining and air-operated equipmentTube: Nitrile (RMA Class A) Reinforcement: 1- & 2-wire braid Cover: NeopreneTemp: -40°C to +93°C, (-40°F to +200°F)Pressure: 35-70 bar / 500-1000 psi

Medium Pressure H6002 BULLDOG™ Air

Application: Power drills, boring, mining and air-operated equipmentTube: Nitrile Reinforcement: 2-fiber braid or fiber ply Cover: Neoprene or vinyl nitrile Temp: -40°C to +93°C, (-40°F to +200°F)Pressure: 13,8-28,0 bar / 200-400 psi

EHA502 Heavy Duty Air

Application: Heavy-duty air Tube: Synthetic rubber Reinforcement: High-tensile synthetic textile Cover: Synthetic rubberTemp: -25°C to +70°C, (13°F to +158°F)Pressure: 28 bar / 400 psi

EHA501 Medium Duty Air

Application: Medium-duty air serviceTube: Synthetic rubber Reinforcement: High-tensile synthetic textile Cover: Synthetic rubber Temp: -25°C to +70°C, (13°F to +158°F)Pressure: 20,7 bar / 300 psi

Low Working PressureH9949 SHOCK-SAFE™

Application: Air and water transfer where hose must be non-conductiveTube: Nitrile (non-conductive) Reinforcement: 2-fiber braidCover: Vinyl nitrile (non-conductive) Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 19 bar / 275 psi

H1776 & H1777 PERFECTION™ 300

Application: Air and water transfer, air toolsTube: Nitrile (RMA Class A) Reinforcement: 2-fiber braid Cover: Vinyl nitrile Temp: -40°C to +82°C, (-40°F to +180°F)Pressure: 22,4 bar / 325 psi

H115 & H116 PERFORMER II™

Application: Air and water transfer, air-operated tools and pneumatic tools on production lineTube: Nitrile (RMA Class B) Reinforcement: 1- & 2-fiber braid Cover: Vinyl nitrileTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 15,5-20,7 bar / 225-300 psi


Air

and

Mul

tipur

pose

H201 EASY COUPLE™

Application: Air and water transfer, power for air-operated and pneumatic tools Tube: Vinyl Nitrile (RMA Class A) Reinforcement: 1-braid fiber Cover: Neoprene or Vinyl nitrileTemp: -40°C to +100°C, (-40°F to +212°F)Pressure: 14-21 bar / 200-300 psi

H265 ULTRAFORCE™

Application: Air and water transfer, power for air-operated tools and lubricated airTube: Modified vinyl Reinforcement: 2 spiral fiber Cover: Pin-pricked modified rubberTemp: -23°C to +65°C, (-10°F to +150°F)Pressure: 8,5-24 bar / 125-350 psi

H275 POLYFORCE II™

Application: Air and water transfer, air-operated tools and lubricated airTube: PVC Reinforcement: 2 spiral fiber Cover: Pin-pricked PVCTemp: -23°C to +65°C, (-10°F to +150°F)Pressure: 8,5-17,2 bar / 125-250 psi

H1812 Industrial Air/ Water

Application: Air and water transfer, pneumatic tools and spraying water-based fertilizers and pesticidesTube: EPDM rubber Reinforcement: 2-fiber braid Cover: EPDM rubberTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 17,2-19 bar / 250-275 psi

General Air & WaterH1981 & H1982 MARATHONER™ – Non-Conductive

Application: Medium oil-resistance, air and water transferTube: Nitrile blend Reinforcement: 2- or 4-fiber spiral Cover: Pin-pricked nitrile blendTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H0105 BOSFLEX™ A/W

Application: Air and water transfer, and spraying and conveying water-based liquid fertilizers and pesticidesTube: EPDM Reinforcement: 4-fiber spiral and 2-fiber braid Cover: EPDMTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H0106 BOSFLEX™ A/W

Application: Air and water transfer, and spraying and conveying water-based liquid fertilizers and pesticidesTube: EPDM Reinforcement: 2-spiral fiber Cover: EPDMTemp: -40°C to +82°C, (-40°F to +180°F)Pressure: 13,8-20,7 bar / 200-300 psi

H1987 Contractors Water

Application: For transfer of waterTube: EPDM rubber Reinforcement: 2-fiber spiral Cover: Pin-pricked EPDM rubberTemp: -34°C to +71°C, (-30°F to +160°F)Pressure: 10,5 bar / 150 psi

Specialty EHW028 Heavy Duty MSHA Mine Spray

Application: High pressure air in minesTube: Oil-mist resistant nitrile blend Reinforcement: High-tensile steel wireCover: MSHA pin-pricked neopreneTemp: -35°C to +100°C, (-31°F to +212°F)Pressure: 70 bar / 1000 psi

H1571 Mineforce

Application: Air and water transfer and high pressure air toolsTube: Modified vinyl Reinforcement: 4-fiber spiral Cover: PVC/nitrile blendTemp: -28°C to +66°C, (-20°F to +150°F)Pressure: 28 bar / 400 psi


Air and M

ultipurpose

Air and MultipurposeIntroduction and Safety Information

WARNING: Testing can be dangerous and should be done only by trained personnel using proper tools

and procedures . Failure to follow such procedures might result in serious injury, death, or damage to property .

WARNING: Failure to properly follow the manufacturer’s recommended procedures for the

care, maintenance, and storage of a particular hose may result in its failure to perform in the manner intended and may result in serious injury, death, or damage to property .

WARNING: Consult with the Coupling Manufacturer to make sure you choose the correct coupling and

proper assembly for the application . Such matching of hose and couplings, and assembling of couplings, should be performed only by trained personnel using proper tools and procedures . Failure to follow manufacturer’s instructions or failure to use trained personnel may result in serious bodily injury and/or property damage .

WARNING: Never use a hose to transfer material it is not specifically meant to transfer . Doing so could

deteriorate the hose and result in leaking, hose bursting, or end blow-offs . This could lead to serious personal injury or death . Always transfer material in a hose that is designed specifically to transfer that material . This information is listed in this catalog .

WARNING: Consider both working pressure and pressure surges when determining “maximum”

pressure . Failure to select a hose that meets both these requirements could lead to end blow-offs, hose leakage, and hose bursting . The result could be serious injury or death . The Eaton hose you choose must meet or exceed the required working pressure, and must have a safety factor to allow for surge pressure .

WARNING: Be aware that if you replace a hose with one having a different I .D . than the original hose,

material velocity could increase or decrease, possibly creating static electricity . This could lead to an explosion causing serious injury or death .

WARNING: Selection of the proper hose for the application is essential to the proper operation and

safe use of the hose and related equipment . Inadequate attention to selection of hose for the application can result in serious bodily injury or property damage . In order to avoid serious bodily injury or property damage resulting from selection of the wrong hose, you should carefully review the information in this catalog .

Every Hose is Easily Identified• Every foot of hose is easily identified by means of

permanent branding . This makes hose selection on thejob quicker, easier and safer, and buying hose is easiertoo—because you can tell at a glance that you’re gettingexactly the hose you ordered .

Multi-Purpose Hose for Specialized Uses• Eaton calls them “Multipurpose” hoses, meaning they’ll

do a tremendous variety of jobs . In many cases oneEaton hose can replace several different “specialpurpose” styles . This helps keep expenses low .

Brand Name Identity (and the quality that goes behind it)• With the Eaton brand name on the hose you buy, you are

assured maximum value and consistent quality . With over100 years worth of reputation at stake, we wouldn’t haveit any other way .

Air and Multipurpose Hose Safety InformationImportant!


Construction:

Tube: Nitrile (RMA Class A)

Reinforcement: 1 .00” - 1 .25” 1-wire braid 1 .50” - 3 .00” 2-wire braid 4 .00” 3-wire braid

Cover: Pin-pricked carboxylated nitrile

Operating Temperature:

-40°C to +121°C(-40°F to +250°F)

Application:• Provide power to

air-operated constructionequipment

• Power air-operated drills,boring, and miningequipment

Markets:• Construction• Mining• Oil and gas exploration• Water drilling• Ship building

Type of Couplings:• Eaton ”U” Series• TTC• Union• Boss male• Ground joint female• Air hammer• Air king• Eaton quick disconnect

Contact coupling manufacturer for attachment procedure and other coupling recommendations

Air and MultipurposeHigh Pressure

BULLDOG GOLD™H6009

Refer to warnings and safety information on pages O-1 – O-16.

Use of damaged hose or improper use may result in bodily injury or property damage. Please consult Eaton catalog or Technical Support for proper application.

Part No. Hose I.D. Hose O.D.Max Operating

PressureBurst

Pressure Weight Length

mtr ft DN mm in mm in bar psi bar psi kg/m lbs/ft mtr ft

H600916- 50 25 25,4 1 .00 38,1 1 .50 70,0 1000 275 4000 0,96 0 .64 50

H600916- 100 25 25,4 1 .00 38,1 1 .50 70,0 1000 275 4000 0,96 0 .64 100

H600920- 50 31 31,8 1 .25 46,0 1 .81 55,0 800 220 3200 1,80 1 .20 50

H600924 50 38 38,1 1 .50 54,0 2 .12 41,0 600 165 2400 2,01 1 .34 50

H600924- 100 38 38,1 1 .50 54,0 2 .12 41,0 600 165 2400 2,01 1 .34 100

H600932- 50 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 50

H600932- 100 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 100

H600932- 150 51 50,8 2 .00 67,5 2 .66 41,0 600 165 2400 2,95 1 .97 150

H600940- 50 60 63,5 2 .50 80,2 3 .16 41,0 600 165 2400 3,75 2 .50 50

H600940- 100 60 63,5 2 .50 80,2 3 .16 41,0 600 165 2400 3,75 2 .50 100

H600948- 40 80 76,2 3 .00 94,5 3 .72 41,0 600 165 2400 4,72 3 .15 50

H600948- 100 80 76,2 3 .00 94,5 3 .72 41,0 600 165 2400 4,72 3 .15 100

H600964- 50 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 50

H600964- 100 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 100

H600964- 150 102 101,6 4 .00 127,0 5 .00 35,0 500 138 2000 7,97 5 .32 150

Air

and

Mul

tipur

pose

– H

igh

Pres

sure


Construction:

Tube: Vinyl nitrile (RMA Class A)

Reinforcement: 0 .50” – 1 .25” 1-wire braid 1 .50” – 3 .00” 2-wire braid 4 .00” 3-wire braid

Cover: Pin-pricked neoprene MSHA approved


-40°C to +93°C(-40°F to +200°F)

Application:• Power operated drills,

boring, and miningequipment

• Provide power toair-operated equipment

Markets:• Oil and gas exploration• Metal working• Construction• Mining

Type of Couplings:• Eaton "U" Series• Eaton "Z" Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



BULLDOG YELLOW JACK™H6008




PressureBurst



H600808 50 12 12,7 0 .50 24,6 0 .97 103,0 1500 420 6000 0,60 0 .40 50

H600808-100 100 12 12,7 0 .50 24,6 0 .97 103,0 1500 420 6000 0,60 0 .40 100

H600812-100 100 19 19,0 0 .75 31,8 1 .25 83,0 1200 335 4800 1,00 0 .67 100

H600816 50 25 25,4 1 .00 38,1 1 .50 69,0 1000 280 4000 1,27 0 .85 50

H600816-100 100 25 25,4 1 .00 38,1 1 .50 69,0 1000 280 4000 1,27 0 .85 100

H600820 50 31 31,8 1 .25 46,0 1 .81 45,0 650 182 2600 1,87 1 .25 50

H600824 50 38 38,1 1 .50 54,0 2 .12 42,0 600 168 2400 2,49 1 .66 50

H600824-100 100 38 38,1 1 .50 54,0 2 .12 42,0 600 168 2400 2,49 1 .66 100

H600832 50 51 50,8 2 .00 67,4 2 .66 42,0 600 168 2400 3,09 2 .06 50

H600832-100* 100 51 50,8 2 .00 67,4 2 .66 42,0 600 168 2400 3,09 2 .06 100

H600840 50 60 63,5 2 .50 80,2 3 .16 28,0 400 112 1600 3,66 2 .44 50

H600840-100* 100 60 63,5 2 .50 80,2 3 .16 28,0 400 112 1600 3,66 2 .44 100

H600848 50 80 76,2 3 .00 94,5 3 .72 28,0 400 112 1600 4,15 2 .77 50

H600848-100 100 80 76,2 3 .00 94,5 3 .72 28,0 400 112 1600 4,15 2 .77 100

H600864 50 102 101,6 4 .00 126,9 4 .99 28,0 400 112 1600 6,43 4 .29 50

* 150 ft . length available

Air and M

ultipurpose – High Pressure



Construction:

Tube: Oil-resistant nitrile blend

Reinforcement: High-tensile steel wire

Cover: Pin-pricked, abrasion, ozone, and weather resistant synthetic rubber


-40°C to +93°C (-40°F to +200°F)

Application:• High-pressure air service

Markets:• Construction• Oil field equipment• Drilling equipment• Mining• Rental industry• Steel• Paper

Type of Couplings:• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



PressureBurst



EHA500-08YW- MXX 100 12 12,7 0 .50 23,0 0 .91 41,0 600 165 2400 0,51 0 .34 40-61 100

EHA500-12YW- MXX 100 19 19,0 0 .75 29,5 1 .16 41,0 600 165 2400 0,62 0 .42 40-61 100

EHA500-16YW- MXX 100 25 25,4 1 .00 36,0 1 .42 41,0 600 165 2400 0,88 0 .59 40-61 100

EHA500-20YW- MXX 100 31 31,8 1 .25 43,0 1 .69 41,0 600 165 2400 1,12 0 .75 40-61 100

EHA500-24YW- MXX 100 38 38,1 1 .50 50,0 1 .97 41,0 600 165 2400 1,55 1 .04 40-61 100

EHA500-32YW- MXX 100 51 50,8 2 .00 66,0 2 .60 41,0 600 165 2400 2,51 1 .69 40-61 100

EHA500-40YW- MXX 100 60 63,5 2 .50 80,0 3 .15 41,0 600 165 2400 3,36 2 .26 40-61 100

EHA500-48YW- MXX 100 80 76,2 3 .00 93,9 3 .70 41,0 600 165 2400 4,49 3 .02 40-61 100

EHA500-64YW- MXX 100 102 101,6 4 .00 122,0 4 .80 41,0 600 165 2400 6,77 4 .55 40-61 100

**50 ft . length also available and black cover available on a MTO basis

High Pressure AirEHA500



Air

and

Mul

tipur

pose

– H

igh

Pres

sure


Construction:

Tube: Nitrile (RMA Class A)

Reinforcement: 0 .50" - 1 .25" 1-wire braid 1 .50" - 3 .00" 2-wire braid

Cover: Pin-pricked neoprene


-40°C to +93°C(-40°F to +200°F)


boring, and miningequipment


Markets:• Oil and gas exploration• Metal working• Construction• Mining

Type of Couplings:• Eaton "U" Series• Eaton "Z" Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



Contractors AirH9622




PressureBurst



H962208 50 12 12,7 0 .50 23,8 0 .94 70,0 1000 275 4000 0,51 0 .34 50

H962208- 100 12 12,7 0 .50 23,8 0 .94 70,0 1000 275 4000 0,51 0 .34 100

H962212 50 19 19,0 0 .75 30,2 1 .19 70,0 1000 275 4000 0,65 0 .44 50

H962212-* 100 19 19,0 0 .75 30,2 1 .19 70,0 1000 275 4000 0,65 0 .44 100

H962216 50 25 25,4 1 .00 38,1 1 .50 60,0 850 235 3400 0,91 0 .61 50

H962216-* 100 25 25,4 1 .00 38,1 1 .50 60,0 850 235 3400 0,91 0 .61 100

H962220 50 31 31,8 1 .25 43,7 1 .72 35,0 500 138 2000 1,20 0 .81 50

H962220-* 100 31 31,8 1 .25 43,7 1 .72 35,0 500 138 2000 1,20 0 .81 100

H962224 50 38 38,1 1 .50 53,9 2 .12 35,0 500 138 2000 2,23 1 .50 50

H962224- 100 38 38,1 1 .50 53,9 2 .12 35,0 500 138 2000 2,23 1 .50 100

H962232 50 51 50,8 2 .00 67,4 2 .65 35,0 500 138 2000 3,03 2 .04 50

H962232-* 100 51 50,8 2 .00 67,4 2 .65 35,0 500 138 2000 3,03 2 .04 100


Air and M

ultipurpose – High Pressure


Construction:

Tube: Nitrile

Reinforcement: .50" - 1 .00" 2-fiber braid 1 .25" - 3 .00" 2-fiber ply

Cover: .50" - 1 .00" pin-pricked

neoprene1 .25" - 3 .00" pin-pricked

vinyl nitrile


-40°C to +93°C(-40°F to +200°F)


boring and miningequipment


Markets:• Metal working• Construction• Mining• Forest industry

Type of Couplings:• Eaton “U” Series• Eaton “Z” Series• Boss• Ground joint• Air hammer• Air king• Eaton quick disconnect



PressureBurst



H600208 50 12 12,7 0 .50 23,0 0 .91 28,0 400 110 1600 0,46 0 .31 50

H600208-* 100 12 12,7 0 .50 23,0 0 .91 28,0 400 110 1600 0,46 0 .31 100

H600212 50 19 19,0 0 .75 30,2 1 .19 28,0 400 110 1600 0,68 0 .46 50

H600212- 100 19 19,0 0 .75 30,2 1 .19 28,0 400 110 1600 0,68 0 .46 100

H600216 50 25 25,4 1 .00 38,1 1 .50 28,0 400 110 1600 1,00 0 .67 50

H600216- 100 25 25,4 1 .00 38,1 1 .50 28,0 400 110 1600 1,00 0 .67 100

H600220 50 31 31,8 1 .25 46,0 1 .81 28,0 400 110 1600 1,28 0 .86 50

H600220- 100 31 31,8 1 .25 46,0 1 .81 28,0 400 110 1600 1,28 0 .86 100

H600224 50 38 38,1 1 .50 52,4 2 .06 28,0 400 110 1600 1,47 0 .99 50

H600224- 100 38 38,1 1 .50 52,4 2 .06 28,0 400 110 1600 1,47 0 .99 100

H600232 50 51 50,8 2 .00 66,7 2 .63 20,7 300 83 1200 1,89 1 .27 50

H600232- 100 51 50,8 2 .00 66,7 2 .63 20,7 300 83 1200 1,89 1 .27 100

H600248- 150 80 76,2 3 .00 90,5 3 .56 13,8 200 55 800 2,86 1 .92 150


Air and MultipurposeMedium Pressure

BULLDOG™ AirH6002



Air

and

Mul

tipur

pose

– M

ediu

m P

ress

ure

Term

s an

d Co

nditi

ons

of S

ale

© 2013 EatonAll Rights ReservedPrinted in USADocument No. E-HOOV-MC003-E2

Eaton Industrial Hose1750 Hardeman LaneCleveland, TN 37312USATel: 1-800-833-3837FAX: 1-952-974-7513www.eaton.com/hydraulics

EatonHydraulics Group EuropeRoute de la Longeraie 71110 MorgesSwitzerlandTel: +41 (0) 21 811 4600Fax: +41 (0) 21 811 4601

Eaton Hydraulics Group Asia PacificEaton BuildingNo.7 Lane 280 Linhong Road Changning District, Shanghai200335 ChinaTel: (+86 21) 5200 0099Fax: (+86 21) 2230 7240

industrial hose 2016 product catalog - texas rubber...

Documents