APPRAISERS

AUCTIONEERS LIQUIDATORS

RECOVERYINVESTM

ENT SERVICES

18% ONLINE BUYER’S PREMIUM

INVESTMENT RECOVERY SERVICES3421 North Sylvania Avenue, Fort Worth, TX 76111

tel: 800.583.1111 • 817.222.9848 • fax: 817.834.4075 Email Evan at et@irsauction.com or Gregg at gt@irsauction.com • TX Lic. No. 11245

WWW.IRSAUCTION.COM

ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR

ONLINE BIDDING AT THIS AUCTION

ONLINE AUCTION

BIDDING CLOSES: Thursday, November 10, 2016 at 12:00 P.M. CSTINSPECTION: Wednesday, November 9, 2016 from 9:00 A.M. – 3:30 P.M.

C&H PrecisionFormer Assets of

12227 FM 519 Houston, Texas 77041

(14) LATE-MODEL CNC MACHINESFEATURING: CNC Turning Centers,

Horizontal & Vertical Machining Centers

2013 OKK KCV-800/30L Vertical Machining Center w/Fanuc 3li-A CNC Control w/Through Spindle Coolant System at 1,000 PSI, table size: 129.92" x 32.28", travel: X-axis 120.08", Y-axis 32.28", Z-axis 28.35", spindle drive: AC 30/25 HP, spindle taper: Cat-50, splash guard top cover, 4th axis interface for rotary table, MMK MDH0453 (18" table, 8" thru hole), Bison 3-jaw 20" diameter set thru-chuck and adapter, spindle taper: Cat-50, spindle speed: 6,000 RPM, spindle motor: 30 HP w/geared head, ATC capacity: (40) tools, rigid tapping, spindle oil cooler, full enclosure type splash guard, screw-type chip conveyor, S/N 202.

2013

SEE VIDEOS OF ALL MACHINES UNDER POWER

AT IRSAUCTION.COM

2 2

2013 TAKISAWA Nex-110 2-Axis Turning Center, 10" chuck, max. swing: 19.800", max. turning diameter: 15.750", max. turning length: 25.860", spindle nose A2-8, max. tools: 10, machine weight: 11,000-lbs., S/N CN12N10737.

2013 TAKISAWA Nex-110 2-Axis Turning Center, 10" chuck, max. swing: 19.800", max. turning diameter: 15.750", max. turning length: 25.860", spindle nose A2-8, max. tools: 10, machine weight: 11,000-lbs., S/N CN09N10712.

CNC TURNING CENTERS

2013

2013

33

2014 TAKISAWA LA 250L CNC Turning Center w/Fanuc Oi-TD Control and All Standard Features w/Chip Conveyor, max. swing: 22.8", turning diameter: 11.1", max. turn diameter: 17.7", max. turn length: 45.8", bar work capacity: 2.9", X-axis travel: 10", Z-axis travel: 47.2", spindle speed: 3,500 RPM, 10-station turret, 12" hydraulic chuck w/2.95" bar capacity through chuck and spindle, 25/20 HP spindle motor, geared spindle drive, 10-station turret, slant bed design, heavy-duty box ways, and tooling, S/N C007AL0024.

2013 TAKISAWA LA 250L CNC Turning Center w/Fanuc Oi-TD Control and All Standard Features w/Chip Conveyor, max. swing: 22.8", turning diameter: 11.1", max. turn diameter: 17.7", max. turn length: 45.8", bar work capacity: 2.9", X-axis travel: 10", Z-axis travel: 47.2", spindle speed: 3,500 RPM, 10-station turret, 12" hydraulic chuck w/2.95" bar capacity through chuck and spindle, 25/20 HP spindle motor, geared spindle drive, 10-station turret, slant bed design, heavy-duty box ways, and tooling, S/N CN08AL0005.

BIDDING CLOSES: THURSDAY, NOVEMBER 10, 2016 AT 12:00 P.M. CST

2013

2014

4

2014 SAMSUNG SL-40/1500 CNC Turning Center w/Fanuc Oi-TD Control, 26" swing, 26" swing over bed, 11" X-axis travel, 63.2" center, 25/30 HP, 10-position tool turret, 4.6" hole, 1,800 RPM, MT #4 tailstock, chip conveyor, tool presetter, programmable tailstock, barfeeder interface, operation status light, S/N 12I750020.

2014 TAKISAWA LA-350 CNC Turning Center, chip conveyor, tool pre-setter, tool pre-setter, w/Fanuc Oi-TD (10.4" CRT) CNC controller, spindle speed: 2,000 RPM, 2-range gear headstock, 15" through hole 3-jaw chuck, max. turning diameter: 21.6", max. turning length: 63", X-axis rapid: 472 IPM, Z-axis rapid: 630 IPM, 4.6" bar capacity, 12-tool station servo-driven turret, 1-1/4" square tool shank height, 2-1/2" boring bar holder, floor space: 184" x 81", weight: 16,500-lbs., 30 HP Fanuc A Series spindle motor (30 min.), OD tool holder space, face end holder block, boring bar holders, sleeve for boring bar holders, right discharge heavy-duty chip conveyor, halogen work light, triple-lamp completion, bar feeder interface, graphics card, 12-station turret I/O 10-station turret, S/N C010S70003.

CNC TURNING CENTERS

2014

2014

5

2014 TAKISAWA LA-450 CNC Turning Center, chip conveyor, tool pre-setter, w/Fanuc Oi-TD (10.4" CRT) CNC controller, spindle speed: 1,800 RPM, 2-range gear headstock, 18" through hole 3-jaw chuck, max. turning diameter: 21.6", max. turning length: 63", X-axis rapid: 472 IPM, Z-axis rapid: 630 IPM, 5.9" bar capacity, 10-tool station servo-driven turret, 1-1/4" square tool shank height, 2-1/2" boring bar holder, floor space: 184" x 81", weight: 17,700-lbs., 35 HP Fanuc A Series spindle motor (30 min.), OD tool holder spacers, face-end holder blocks, sleeve for boring bar holders, right discharge heavy-duty chip conveyor, halogen work light, triple-lamp completion, bar feeder interface, graphics card, S/N C008S70001.

2013 DMC CNC Turning Center DL-55L w/Fanuc Oi-TD, max. swing over bed 30.5", max. turn diameter 24.8", max. turn length 57.6", max. bar capacity 6.38", chuck size 21", spindle nose A2-15, spindle bore 7.13", spindle motor 40/50 HP, spindle speed 1,800 RPM, X-axis travel 13.78", Z-axis travel 60.2", rapid traverse rates 787X/707Z, tool stations 12, tailstock taper MT5, tailstock quill diameter 6.3", tailstock quill travel 5.91", machine weight 20,300-lbs., 21" chuck, chip conveyor, tool presetter, tailstock, 30-stage signal tower light, machine weight: 13,200 kg, S/N L55L0023.

BIDDING CLOSES: THURSDAY, NOVEMBER 10, 2016 AT 12:00 P.M. CST

2013

2014

6 6

2014 TAKISAWA LS-800L20 CNC Turning Center, spindle speed: 1,200 RPM, 2-range gear headstock, 20" through hole 3-jaw chuck (A2-15), max. turning diameter: 29.9", max. turning length: 76.8", max. swing diameter: 32.7", X-axis rapid: 472 IPM, Z-axis rapid: 630 IPM, 7.1" bar capacity, 12-station tool turret, 1-1/4" square tool shank height, 2.5" boring bar holder, floor space: 223" x 85", weight: 32,300-lbs., 50/40 HP

spindle motor (30 min.), programmable tailstock (body and quill), 1-1/4" OD tool blocks, 2.5" ID boring bar holders, sleeve for boring bar holders, right discharge chip conveyor, halogen work light, triple-lamp completion, manual guide for OIT control, S/N C005S80042.

2014 TAKUMI V-12 Vertical Machining Center w/Fanuc OiMD Control, travels X-, Y-, Z-: 47.2", 26", 24", table size: 53" x 27.2", work load capacity: 2,425-lbs., rapid feed rate X-, Y-, Z-: 787", 787", 551", spindle speed: 6,000 RPM, 20 HP, gear drive, coolant through spindle, 20-bar, Takumi standard, magazine: (24) tools, arm-type, Cat 50, w/belt-type chip conveyor, spindle cooler, cutting coolant system, centralized auto. lubrication system, working lamp and indication lamp, coolant and air guns, coolant tank and coolant flushing, manual pulse generator, RS-232C interface, fully enclosed splash guard, wired for 4th axis, tapping lubrication, amplifier A06B-6114-H104, S/N V12226.

CNC TURNING CENTERS

VERTICAL MACHINING CENTERS

2014

2014

77

2014 TAKUMI V-12 Vertical Machining Center w/Fanuc OiMD Control, travels X-, Y-, Z-: 47.2", 26", 24", table size: 53" x 27.2", work load capacity: 2,425-lbs., rapid feed rate X-, Y-, Z-: 787", 787", 551", spindle speed: 6,000 RPM, 20 HP, gear drive, coolant through spindle, 20-bar, Takumi standard, magazine: (24) tools, arm-type, Cat 50, w/belt-type chip conveyor, spindle cooler, cutting coolant system, centralized auto. lubrication system, working lamp and indication lamp, coolant and air guns, coolant tank and coolant flushing, manual pulse generator, RS-232C interface, fully enclosed splash guard, wired for 4th axis, tapping lubrication, amplifier A06B-6114-H104, S/N V12222.

2013 TAKUMI V-15 Vertical Machining Center w/Fanuc 21IMB Control, travels: X-axis 1,524 mm, Y-axis 762 mm, Z-axis 720 mm, spindle nose to table 150–870 mm, spindle-type gear (2-step), spindle speed 6,000 RPM, spindle motor (cont./30 min. rated) 18.5/15 kW, spindle taper #50, AICC, 10.4" LCD, memory 2560M, S/N M0348, Kitagawa rotary table “Q” Mdl. MR-320 w/Fanuc Alpha 8/3000i Servo motor, S/N M0356

VERTICAL MACHINING CENTERS

2013

2014

Visit Website for Details, Photos & Complete Terms & Conditions • www.irsauction.comQS-0034504

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

APPRAISERS

AUCTIONEERS LIQUIDATORS

RECOVERYINVESTM

ENT SERVICESONLINE AUCTION

INTERNET BIDDING ONLY

Sale Conducted by:

INVESTMENT RECOVERY SERVICES3421 NORTH SYLVANIA AVENUE, FORT WORTH, TX 76111

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

Appraisers on Staff

ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION

2013 TAKUMI V-15 Vertical Machining Center w/Fanuc 21IMB Control, travels: X-axis 1,524 mm, Y-axis 762 mm, Z-axis 720 mm, spindle nose to table 150–870 mm, spindle-type gear (2-step), spindle speed 6,000 RPM, spindle motor (cont./30 min. rated) 18.5/15 kW, spindle taper #50, AICC, 10.4" LCD, memory 2560M, S/N M0348, Kitagawa rotary table “Q” Mdl. MR-320 w/Fanuc Alpha 8/3000i Servo motor, S/N M0348.

SEE VIDEOS OF ALL MACHINES UNDER POWER AT IRSAUCTION.COM

(14) LATE-MODEL CNC MACHINESFEATURING: CNC Turning Centers,

Horizontal & Vertical Machining Centers

C&H PrecisionFormer Assets of

Houston, Texas

BIDDING CLOSES: Thursday, November 10, 2016 at 12:00 P.M. CST

2013