sliding door fittings - furniture fittings, architectural...
TRANSCRIPT
AH 5.88 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5Section trolley hanger and guide
Packing: 1 set
Panel preparation detail
Wall mounting Model A1, E1
Features
• For 1- and 2-leaf sliding doors
• Tempered safety glass: 8, 10, 12 mm
• Laminated glass: 8–12.7 mm
• Wall mounting installation
• Door hight adjustable +3 mm
Sliding door fitting Design 40-V/80-V SLIDO
Sliding door fitting set Min. door width mm Max. door weight kg Model Cat. No.
Without soft closing mechanism 500 40 A1 940.42.10780 940.82.173
On both sides with soft closing mechanism 680 40 E1 940.42.10880 940.82.174
AH 5.89New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of Model
A1 E1Running gears 2 pcs. 2 pcs.
Soft closing mechanism – 2 pcs.
Stopper and stop pin 2 pcs. –
Mounting plate and cover caps 2 pcs. 2 pcs.
Cover caps 1 pc. 1 pc.
Floor guide for thicknesses 8, 10, 12.7 mm 1 pc. 1 pc.
Track and accessories Material Finish Length mm Cat. No.
Track for wall distance 12 mm Aluminium Clear anodized 2,000 940.82.2203,000 940.82.2304,000 940.82.2406,000 940.82.260
Running track Aluminium Clear anodized 2,000 940.82.3203,000 940.82.3304,000 940.82.3406,000 940.82.360
Floor guide thickness 8, 10, 12 mm Stainless steel Matt – 981.52.311
AH 5.90 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Panel preparation details
Single sliding door, installed on the wall
Double sliding door, installed on glass
Features
• For 1- and 2-leaf sliding doors
• Floor guide, adjustable, free of play
Technical data
• For glass thicknesses: 10–12 mm
• Max. door weight per leaf: 100 kg
• Support rods: Ø25 mm
Material/Finish
• Running gear with ball bearing plastic rollers
• Rubber profile black
Installation
• Clamp fixing, with special fixing range, order separately
Sliding door fitting Inox Star 100 StarTec
AH 5.91New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Individual components Material Finish For 1 door Cat. No.
Roller hanger drilling hole Ø20 mm Stainless steel Matt 2 pcs. 941.17.012
Stopper with spring Stainless steel Matt 2 pcs. 941.17.040
Rail Ø25 mm, length 3,000 mm Stainless steel Matt 1 pc. 941.16.930
Bottom guide Stainless steel Matt 1 pc. 981.52.311
Additinal components Material Finish Cat. No.
Rail holder to glass Stainless steel Matt 941.17.032
Rail holder to wall Stainless steel Matt 941.17.033
Rail end holder Stainless steel Matt 941.17.031
Cover cap Stainless steel Matt 941.17.020
Tool Zinc alloy – 941.17.034
Note
The distance between two holders should be less than the width of the door panel. For door panels over 1,200 mm please use min. 3 holders
per door panel. For glass/glass installation please use min. 2 holders per glass panel.
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
AH 5.92 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Roller cut out
Stopper cut out
Section bottom rail and top track
Packing: 1 set
Note
Please note the stopper cut out is necessary:
• For a two door installation
• If the door panel must flush the guide track
Glass cut out
Features
• For 1- and 2-leaf sliding doors
• Usable for tempered safety glass 8–12.7 mm
• Door height adjustable +3 mm
Technical data
• Max. door weight per leaf: 150 kg
Sliding door fitting Design 150-U SLIDO
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts.
Sliding door fitting set ,without running track Cat. No.
Without soft closing mechanism, for 1-leaf door (Set consisting of 2 running gears, 2 stopper, slide felt strips) 941.58.004
AH 5.93New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Ceiling installation and wall mounting Ceiling and wall mounting glass thickness 8-12.7 mm
Glass height H1 = H - 32–38 mm (without stopper glass cut out)
Glass height H1 = H - 32–34 mm (with stopper glass cut out)
Drilled top guiding track
Track and accessories Material Finish Length mm Cat. No.
Bottom running rail, 22 x 2.6 mm drilled Stainless steel Matt 2,000 941.58.9203,000 941.58.930
Bottom running rail, drilled (2 pcs.) 6,000 941.58.960
Bottom running track 22 x 2.6 mm Stainless steel Matt 2,000 941.58.8203,000 941.58.830
Bottom running rail 22 x 2.6 mm 6,000 941.58.860
Top guiding track drilled, incl. plastic caps Aluminium Stainless steel colouredanodized
2,000 941.58.7203,000 941.58.7306,000 941.58.760
Wall mounting bracket height adjustableLength L = Wall distance
Aluminium Stainless steel colouredanodized
25 941.58.06035 941.58.06145 941.58.06265 941.58.063
Note
The wall distance is always the same, even if the glass thickness is
different. For extension of wall distance, please select different sizes
of wall mounting brackets.
AH 5.94 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Ceiling installation and wall mounting
Packing: 1 set
Feature
• For 1-leaf and 2-leaf sliding door
• For glass thickness: 8 or 10 mm
• Door height adjustable +4/-3 mm
• Wall mount or ceiling installation
Technical data
• Door width: 50-F min. 500 mm, 80-F/120-F min. 630 mm
• Max. door weight per leaf: 50, 80 or 120 kg
Sliding door fitting Classic 50-F/80-F/120-F SLIDO
Sliding door fitting set ,without running track Material Finish 50 kg 80 kg 120 kg
Without softclosing mechanism Aluminium Stainless steel colouredanodized
940.67.003 – 941.30.003
Silver coloured anodized 940.67.002 – 941.30.002
On both sides with softclosing mechanism Aluminium Stainless steel colouredanodized
940.67.007 941.30.007 941.30.103
Silver coloured anodized 940.67.006 941.30.006 941.30.102
H = Total height TH = Door height
AH 5.95New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Section floor guideSection trolley hanger 50 kg with soft closing mechanism
Section trolley hanger 120 kgSection trolley hanger 50 kg
Sets consisting of Packing
550-F/120-F without soft closing mechanism
Running gear for 50 kg 2 pcs.
Running gear for 120 kg 2 pcs.
Stopper and floor guide 1 set
550-F/80-F/120-F with soft closing mechanism (both sides)
Running gear for 50 kg 2 pcs.
Running gear for 80 kg 2 pcs.
Stopper, floor guide and self closing mechanism 2 sets
AH 5.96 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Track and accessories Material Finish Length mm Cat. No.
Running track set, wall mounting
Aluminium Silver coloured anodized 2,000 940.67.8203,000 940.67.8304,000 940.67.8406,000 940.67.860
Stainless steel coloured anodized 2,000 940.67.8213,000 940.67.8314,000 940.67.8416,000 940.67.861
Running track set, ceiling installation
Aluminium Silver coloured anodized 2,000 940.67.9203,000 940.67.9304,000 940.67.9406,000 940.67.960
Stainless steel coloured anodized 2,000 940.67.9213,000 940.67.9314,000 940.67.9416,000 940.67.961
End cap, clipping on, 1 pair Plastic Aluminium coloured anodized – 940.67.060
Stainless steel coloured anodized – 940.67.061
Brush seal Plastic Black 2,000 940.67.7203,000 940.67.7304,000 940.67.7406,000 940.67.760
Floor guide Stainless steel Matt – 981.52.311
Soft and self closing mechanism set for each door, for soft andself closing on both sides
Aluminium/plastic Door weight 40 kg – 941.30.080
Door weight 80 kg – 941.30.081
Door weight 120 kg – 941.30.082
Sliding Door Fitting Classic 50-F/80-F/120-F SLIDO
AH 5.97New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Wall compensation unit profile for Classic 50-F/80-F/120-F SLIDO
Feature
• Wall mounting installation
Installation
43
Set consisting of Distance mm Length mm Finish Cat. No.
Wall compensation unit profile, for glue fixing, not drilled, consists of 30 x 15 mm and 20 x 15 mm (H x D) profile
15 2000 Silver coloured anodized 940.67.620
Stainless steel coloured anodized 940.67.621
Wall compensation unit profile, for glue fixing, not drilled, consists of 30 x 10 mm and 20 x 10 mm (H x D) profile
10 Silver coloured anodized 940.67.520
Stainless steel coloured anodized 940.67.521
End caps, 1 pair, for compensating of 10, 15 and 20 mm distance, for clip fixing
– – Silver coloured anodized 940.67.062
Stainless steel coloured anodized 940.67.063
Note
Please use for 20 mm wall distance compensation units 2 x 10 mm
H = Total height TH = Door height
AH 5.98 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Glass fixing profile Classic 50-F/80-F/120-F SLIDO
Installation
H = Total height
Features
• Wall mounting and ceiling installation
• Suitable for glass thicknesses (fixed glass):
Tempered safety glass 8 or 10 mm, laminated glass 8–8.7 mm
Version Material Finish Length mm Cat. No.
Fixed glass fixing profile, for running track set, with screws,for wall mounting and ceiling installation
Aluminium Silver coloured anodized 2,000 940.67.1203,000 940.67.130
Stainless steel coloured anodized 2,000 940.67.1213,000 940.67.131
Fixed glass fixing profile, for floor and wall connection,height adjustable, pre-drilled and countersunk
Aluminium Silver coloured anodized 2,000 940.67.2203,000 940.67.230
Stainless steel coloured anodized 2,000 940.67.2213,000 940.67.231
Sealing profile, for glass thicknesses 8 to 10 mm Rubber Black 5,000 940.67.07010,000 940.67.072
Cover profile, for unused aperture in fixed component Aluminium Silver coloured anodized 2,000 940.67.3203,000 940.67.330
Stainless steel coloured anodized 2,000 940.67.3213,000 940.67.331
Cover profile, for unused aperture for running distance,with retaining spring
Aluminium Silver coloured anodized 1,000 940.67.4102,000 940.67.420
Stainless steel coloured anodized 1,000 940.67.4112,000 940.67.421
End cap, for fixed glass fixing profile (for floor connection), 1 pc. Aluminium Silver coloured anodized – 940.67.064
Stainless steel coloured anodized 940.67.065
End caps, 1 pair, for compensating 10, 15 and 20 mm distance,for clip fixing
Plastic Silver coloured – 940.67.062
Stainless steel coloured – 940.67.063
Order reference
The wall mounted running track are usable for wall mounting and ceiling installation. The holes which are required for wall mounting or ceiling
installation must be drilled on site.
TH = Door height FGH = Fixed glass height
AH 5.99New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Classic 40-L/80-L/120-L SLIDO
Ceiling installation and wall mounting
Sliding door fitting set, without running track Version Min. door width mm 40 kg 80 kg 120 kg
Without soft closing mechanism A – 940.43.090 940.82.140 941.25.000
On one side with soft closing mechanism B 628 940.43.091 940.82.141 –
On both sides with soft closing mechanism C 769–888 940.43.092 940.82.142 –D 889–1,008 940.43.093 940.82.143 –E 958 940.43.094 940.82.144 –
Packing: 1 set
Feature
• For 1- leaf and 2- leaf sliding door
• Suitable for tempered safety glass: 8–10 mm
• Door height adjustable
• Suspension fitting with flange clip, clamped connection
(installation without tools and glass drilling)
Technical data
• Max. door weight per leaf: 40–120 kg
Floor guide
Order reference
Individual components ........................................... page 5.101
AH 5.100 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
liding Door FittingsSliding Door Fittings – SlidoFor glass doorsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.
Selection guide and trolley hanger Soft closing versions overview
Version A without soft closing mechanism
Version B with soft closing mechanism (1-side)
Version C with soft closing mechanism (both sides)
Version D with soft closing mechanism (both sides)
Version E with soft closing mechanism (both sides)
Note
Version A, C and D suitable for 40-L/80-L/120-L
Version B and E suitable for 40-L/80-L
Recommended max. width
Recommended max. width
Installation
Removing the flange clip
Left flange clip Right flange clip
Sliding door fitting Classic 40-L/80-L/120-L SLIDO
AH 5.101New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Additional set components Model Version For 1 door leaf
Floor guide, for glass thicknesses 8, 10, 12.7 mm 40/80/120-L A, B, C, D, E
1 pc.
Track buffer with retainer spring and rubber buffer 40/80/120-L A 2 pcs.
B 1 pc.
Release device with stopper 40/80/120-L B 1 pc.
C, D, E 2 pcs.
Order reference
Track and accessories .............................................page 5.102
Sliding door application ........................................... page 5.104
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Set consisting of Model Version For 1 door leaf
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools) 40-L A 2 pcs.
B 1 pc.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools),soft and self closing mechanism on one side
B 1 pc.
E 2 pcs.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools), soft and self closing mechanism on both sides
C 1 pc.
D 1 pc.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools) 80-L A 2 pcs.
B 1 pc.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools), soft and self closing mechanism on one side
B 1 pc.
E 2 pcs.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools), soft and self closing mechanism on both sides
C 1 pc.
D 1 pc.
Running gear, 4-wheel, suspension screw with nut and flange clip for hooking in (without tools) 120-L A 2 pcs.
AH 5.102 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Tracks, components and accessories Material Finish Length mm Cat. No.
Running track 31 x 33 mm (W x H), Leaf weight: 40–120 kg
Aluminium Silver coloured anodized
2,000 940.43.9223,000 940.43.9324,000 940.43.9426,000 940.43.962
Running track 47.5 x 47 mm (W x H), Leaf weight: 40–120 kg
Aluminium Silver coloured anodized
2,000 940.43.9203,000 940.43.9304,000 940.43.9406,000 940.43.960
Fixed glass fixing profile, for running track, , for glass thickness 8–12.7 mm
Aluminium Silver coloured anodized
2,000 940.43.8203,000 940.43.8304,000 940.43.8406,000 940.43.860
– Cover for unused aperture in fixed glass fixing profile
Rubber Grey – 940.43.038
Fixed glass fixing profile for wall or floor, forglass thicknesses: 8–12.7 mm
Aluminium Silver coloured anodized
2,000 940.43.822
3,000 940.43.832
4,000 940.43.842
6,000 940.43.862
Stainless steel coloured
2,000 940.43.823
3,000 940.43.833
4,000 940.43.843
6,000 940.43.863
15
Sealing profile, for glass thickness: 10 mm Rubber Transparent 10,000 940.43.035
Sliding door fitting Classic 40-L/80-L/120-L SLIDO
Glass clamp set Model Version For 1 door leaf Length mm Cat. No.
For glass thickness 8 mm 40/80/120-L A, B, C, D, E
2 pcs. 200 940.43.040
1 pc. 1,000 940.43.042
1 pc. 1,500 940.43.044
For glass thickness 10 mm 40/80/120-L A, B, C, D, E
2 pcs. 200 940.43.041
1 pc. 1,000 940.43.043
1 pc. 1,500 940.43.045
AH 5.103New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Additional components Material Finish Length mm Cat. No.
Wall mounting bracket with screw and nut, for running track Steel Galvanized 36 940.42.06144 940.62.06164 940.42.063
Mounting key tool Steel Galvanized – 940.43.032
– Mounting key tool Steel Galvanized – 941.25.090
– Floor guide, for glass thicknesses 8, 10, 12.7 mm Zinc alloy Nickel plated – 940.82.030
– Floor guide, for glass thicknesses 8, 10, 12 mm Stainlesssteel
Nickel platedmatt
– 981.52.311
Cover plates and accessories Material Finish Length mm Cat. No.
F
Clip cover plate for running track ,,height 56 mm
Aluminium Silver coloured anodized
2,000 940.43.1233,000 940.43.1336,000 940.43.163
R
Clip cover plate for running track ,height 90 mm
Aluminium Silver coloured anodized
2,000 941.25.7203,000 941.25.7306,000 941.25.760
G
Clip panel for running track , ,for integration in suspended ceilings
Aluminium Silver coloured anodized
2,000 940.43.6203,000 940.43.6306,000 940.43.660
S
Side cover for cover plate, for running track and cover R
Plastic Sliver coloured – 941.25.030
U
Side cover for cover plate, for running track cover F
Plastic Sliver coloured – 940.43.028
– Side cover for glass clamp, height 43 mm Aluminium Silver coloured anodized
200 940.43.0461,000 940.43.0471,500 940.43.048
– End cap set for glass thickness 8 mm Plastic Sliver coloured – 940.43.049
End cap set for glass thickness 10 mm 940.43.050
AH 5.104 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door application for Classic L and Synchro SLIDO
Wall mounting with wall mounting bracket Wall mounting with wall mounting bracket
and clip panel 90 mm
Wall mounting with running track and
clip panel 90 mm
Ceiling installation with running track
and 2 x clip panel for integration in
suspended ceilings
Ceiling installation with running track and clip
panel 90 mm incl. fixed component.
Sealing profile on one side for glass thickness 10 mm
and wet sealing for glass thicknesses 8–12.7 mm
AH 5.105New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Packing: 1 set
Sliding door fitting Classic 40-N/80-N/120-N SLIDO
Ceiling installation and wall mounting
Sliding door fitting set Version For glassthickness mm
Min. door width mm 40 kg 80 kg 120 kg
Without soft closing mechanism A1 8 – 940.42.123 940.82.178 941.25.123A2 10 940.82.179 941.25.124A3 12 940.82.180 941.25.125
On one side with soft closing mechanism
B1 8 682 940.42.124 940.82.181 –B2 10 940.82.182B3 12 940.82.183
On both sides with soft closingmechanism
E1 8 936 940.42.125 940.82.184 –E2 10 940.82.185E3 12 940.82.186
Feature
• For 1-leaf and 2-leaf sliding door
• Door height adjustable
• Suspension with flange clip (without tools)
• Suitable for temperered safety glass: 8–12 mm
Technical data
• Max. door weight per leaf: 40–120kg
Floor guide
AH 5.106 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Installation
Left flange clip Right flange clip
Version A1/2 /3 without soft mechanism
Section guide and trolley hanger Soft closing versions overview
Version E1/2/3 with soft losing mechanism (both sides)
Version B1/2/3 with soft closing mechanism (1-side)
Note
Version A1/2/3 suitable for 40-N/80-N/120-N
Version B1/2/3 and E1/2/3 suitable for 40-N/80-N
Sliding door fitting Classic 40-N/80-N/120-N SLIDO
AH 5.107New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of Model Mounting Version For 1 door leaf Cat. No.
Running gear, 4-wheel, suspensionscrew with nut and automatic bracket
40-N Left A1 1 pc. 940.42.014
Right A1 1 pc. 940.42.015B1
Left B1 1 pc. 940.42.018E1
Right E1 1 pc. 940.42.019
80-N Left A1, A2, A3 1 pc. 940.82.013
Right A1, A2, A3 1 pc. 940.82.014
Left B1, B2, B3 1 pc. 940.82.016E1, E2 ,E3
Right E1, E2 ,E3 1 pc. 940.82.017
120-N Left A1, A2, A3 1 pc. 941.02.022
Right A1, A2, A3 1 pc. 941.02.023
Glass clamp set with lateral end caps 40/80/120-N For 8 mm A1, B1, E1 1 pc. 940.42.023
For 10 mm A2, B2, E2 1 pc. 940.60.023
For 12 mm A3, B3, E3 1 pc. 940.82.035
Release device with stopper using withsoft closing device
– A1,A2 ,A3 1 pc. 940.42.042
B1, B2, B3 1 pc.
Track buffer with retainer spring and rubber buffer
– B1, B2, B3 1 pc. 940.42.041
A1, A2, A3 2 pcs.
Floor guide, stainless steel matt – For 8–12 ,7 mm 1 pc. 981.52.311
Mounting key tool – A1, A2, A3,B1, B2, B3
1 pc. 940.43.032
3Order reference
Sliding door application ........................................... page 5.108
Track and accessories ............................................ page 5.109
AH 5.108 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Wall mounting with wall mounting bracket Wall mounting with mounting bracket and
clip for panel 115 mm
Wall mounting with running track and
clip panel 115 mm
Ceiling installation with running track and 2x
clip panel for integration in suspended ceilings
Ceiling installation with running track and clip
panel 115 mm including fixed component
Wall mounting with wall bracket and
clip panel 90 mm
50
3515
31
53
Floor guide
Sliding door application for Classic N and Synchro SLIDO
AH 5.109New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5Note
The sealing profile 940.43.035 has to be seperated by hand. For 12 mm glass thickness use silicone. For 10 mm glass use the sealing profile
on outer side. For 8 mm glass use the sealing profiles on both sides. Depending of the glass surface it could help to use slip additive to install
the sealing profile - but only for the sealing profile not by using silicone.
Additional components Material Finish Wall distance mm Length mm Cat. No.
Wall mounting bracket with screwand nut, for running track
Steel Galvanized 16–25 36 940.42.06118–33 44 940.62.06133–55 64 940.42.063
Wall mounting bracket bar, for run-ning track
Aluminium Clearanodized
– 2,000 940.43.7203,000 940.43.7304,000 940.43.7406,000 940.43.760
Mounting holder, to mount track onto wall bracket
Steel Galvanized – – 940.43.024
Mounting key tool Steel Galvanized – – 940.43.032
Track and additional accessories Material Finish Length mm Cat. No.
Single running track, 31 x 33 mm(WxH), leaf weight: 40–120 kg
Aluminium Clear anodized 2,000 940.43.9223,000 940.43.9324,000 940.43.9426,000 940.43.962
Single running track, 47.5 x 47 mm(WxH), leaf weight: 40–120 kg
Aluminium Clear anodized 2,000 940.43.9203,000 940.43.9304,000 940.43.9406,000 940.43.960
Fix glass fix profile for running track Aluminium Clear anodized 2,000 940.43.8203,000 940.43.8304,000 940.43.8406,000 940.43.860
Fixed glass fixing profile, for glassthickness 8–12 mm
Aluminium Clear anodized 2,000 940.43.8223,000 940.43.8324,000 940.43.8426,000 940.43.862
Stainless steel coloured
2,000 940.43.8233,000 940.43.8334,000 940.43.8436,000 940.43.863
Sealing profile, for glass thickness 8–10 mm
15
Rubber Transparent 10,000 940.43.035
Tracks, components and accessories
AH 5.110 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Cover plates and accessories Material Finish Length mm Cat. No.
Clip panel for running track ,height 68 mm
C
Aluminium Clear anodized 2,000 940.43.1203,000 940.43.1304,000 940.43.1406,000 940.43.160
Stainless steel coloured anodized
2,000 940.43.1223,000 940.43.1324,000 940.43.1426,000 940.43.162
Clip panel for wall bracketheight 90 mm
E
Aluminium Clear anodized 2,000 940.43.3203,000 940.43.3304,000 940.43.3406,000 940.43.360
Clip panel for running track ,height 115 mm
F
Aluminium Clear anodized 2,000 940.43.4203,000 940.43.4304,000 940.43.4406,000 940.43.460
Clip panel for running track , lowered ceiling integration
G
Aluminium Clear anodized 2,000 940.43.6203,000 940.43.6304,000 940.43.6406,000 940.43.660
Clip panel for glass clamp
P
Aluminium Silver coloured anodized
150 940.43.5002,000 940.43.5203,000 940.43.5304,000 940.43.5406,000 940.43.560
Side cover for cover plate,for running track and cover C
H
Plastic Sliver coloured – 940.43.031
Stainless steel coloured
– 940.43.036
Side cover for cover plate, for running track and cover F
K
Plastic Sliver coloured – 940.43.021
Side cover for cover plate, for running track and cover C
J
Plastic Sliver coloured – 940.43.020
Side cover for cover plate, for wall bracket and cover E
L
Plastic Sliver coloured – 940.43.023
Side cover for cover plate, for running track and cover F
M
Plastic Sliver coloured – 940.43.029
Fixing clip set, 4 pcs. for wall bracket and cover E
N
Plastic Black – 940.43.022
End cap set for glass clamp 8 mm
Q
Plastic Sliver coloured – 940.43.026
End cap set for glass clamp 10 mm 940.43.027
940.82.026
Tracks, components and accessories
AH 5.111New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
For 1 synchro set please order:
2 Sets glass clamp for required glass thickness: 8, 10 or 12 mm
(940.42.023, 940.60.023, 940.82.035)
4 Track buffers (940.62.041)
1 Synchro set (941.02.000)
1 Track in required length 2,000, 3,000 , 4,000 or 6,000 mm
(940.43.921/931/941/961)
Additional you can order the accordingly clip panel and end cap set,
see page 5.109
Note
The additional synchro set must be ordered in combination with 4
sets of glass clamp (for 8, 10 or 12 mm), 4 pcs. of track buffers
(Classic 40-N/80-N,/120-N) and running track. This product is not
usable for versions with soft closing mechanism.
Additional set Classic Synchro SLIDO
Feature
• For Slido Classic 40-N/80-N/120-N
• Symmetrical opening of 2-leaf doors
• Low wear and tear with quiet running action
• Max. door width:600 mm
Set consisting of For 2-leaf Cat. No.
Running gear, 4 rollers 4 pcs. 940.60.019
Track buffer with deflection roller 2 pcs. 940.60.090
Cable fixing block 2 pcs. 940.60.092
Cable with plastic coating 10 m 1 pc. 940.44.072
Order reference
Classic 40-N/80-N/120-N ....................................... page 5.105
Synchro fitting set Cat. No.
For 2-leaf door without soft closing mechanism 941.02.000
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
AH 5.112 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Junior 40/GS HAWA
Features
• For 1- and 2-leaf sliding doors
• Height adjustable door leaves
• Point fixing with glass retainer
• Suspension with clamp shoe
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. weight per door leaf: 40 kg
• For glass thickness: 8, 10 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Note: 6 mm thick glass may be used with alternative floor mounted guide
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 940.40.008
Packing: 1 set
AH 5.113New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of For 1 door Cat. No.
Running gear, 2-wheel, screw M8 2 pcs. 940.40.012
Clamp shoe with suspension screw M8 2 pcs. 940.40.025
Track buffer with adjustable retainer 2 pcs. 940.40.041
Rubber wall buffer 1 pc. 940.40.051
Floor guide free of play 1 pc. 940.40.032
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver colouredanodized
2,000 940.40.2003,000 940.40.3004,000 940.40.4006,000 940.40.600
Additional components Length mm Cat. No.
Self adhesive glide elements for glass thickness 8 mm, set of 6 pcs. – 940.40.033
Self adhesive glide elements for glass thickness 10 mm, set of 6 pcs. – 940.40.034
Guide track 24 x 24 mm 2,500 940.81.2503,500 940.81.3506,000 940.81.600
Floor mounted door buffer 57 x 28 x 39 mm (L x W x H) – 940.40.052
Guide track 20 x 20 x 3 mm 2,000 941.00.9203,000 941.00.9304,000 941.00.9406,000 941.00.960
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
AH 5.114 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Features
• For 1- and 2-leaf sliding doors
• Height adjustable door leaves
• Suspension with clamp shoe
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. door weight per leaf 80 kg
• For glass thickness 8, 10 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Sliding door fitting Junior 80/GS HAWA
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 940.80.008
Packing: 1 set
Ceiling installation and wall mounting
AH 5.115New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of For 1 door Cat. No.
Running gear 2-wheel 2 pcs. 940.80.012
Clamp shoe with suspension screw M10 2 pcs. 940.80.025
Track buffer with adjustable retainer 2 pcs. 940.80.041
Rubber wall buffer 1 pc. 940.40.051
Floor guide free of play 1 pc. 940.40.032
Additional components Length mm Cat. No.
Self adhesive glide elements for glass thickness 8 mm, set of 6 pcs. – 940.40.033
Self adhesive glide elements for glass thickness 10 mm, set of 6 pcs. – 940.40.034
Guide track 24 x 24 mm 2,500 940.81.2503,500 940.81.3506,000 940.81.600
Floor mounted door buffer (L x W x H) 57 x 28 x 39 mm – 940.40.052
Guide track 20 x 20 x 3 mm 2,000 941.00.9203,000 941.00.9304,000 941.00.9406,000 941.00.960
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.80.200
3,000 940.80.300
4,000 940.80.400
6,000 940.80.600
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Order reference
Soft close device ..................................................... page 5.80
AH 5.116 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
GS Cover profile
Installation option A and D
without glass preparation
(H = internal height,
G = glass height)
Installation option B and C
with glass preparation
(H = internal height,
G = glass height)
Components and acessories Material Finish Length mm Cat. No.
Clip panel for glass fitting Aluminium Silver coloured anodized 2,500 941.01.625
Panel and piece set Plastic Anthracite – 941.01.999
Cut clip panel as required, see installation options and installation
instructions
Installation examples without and with glass preparation
Note
Ceiling installation and wall mounting
AH 5.117New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Installation option A without glass preparation Installation option D without glass preparation
Installation option B with glass preparation Installation option C with glass preparation
Clamp mounted outside, with continuous clip panel Clamp mounted offset inwards, clip panel conceals only the clamp
Clamp mounted offset inwards, clip panel conceals only the clamp Clamp smounted outside, clip panel conceals only the clamp
TB = Door width
Required glass cut-outRequired glass cut-out
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 940.41.001
Packing: 1 set
AH 5.118 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Features
• For 1- and 2-leaf sliding doors
• Suitable for toughened safety glass and laminated sheet glass
• Low installation height
• Height adjustable door leaves
• Point fixing with glass retainer
• Suspension with suspension screw
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. door weight per leaf: 40 kg
• For glass thickness: 8, 10 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Sliding door fitting Junior 40/GP HAWA
Ceiling installation and wall mounting
AH 5.119New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Built-in version 4Built-in version 3Built-in version 2Built-in version 1 Required glass cut-outs
Set consisting of Cat. No.
Running gear 2-wheel 2 pcs. 940.40.012
Suspension bolt M8 and mounting screws 2 pcs. 940.41.022
Glass patch retainer 2 pcs. 940.40.038
Track buffer with adjustable retainer 2 pcs. 940.40.041
One-way drilling jig 1 pc. 940.40.089
Rubber wall buffer 1 pc. 940.40.051
Height adjusting pin 1 pc. 940.40.090
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.40.2003,000 940.40.3004,000 940.40.4006,000 940.40.600
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual
parts. Please order 2 sets for 2-leaf sliding doors. Please order cover caps and additional
components for the different built-in versions separately.
AH 5.120 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Features
• For 1- and 2-leaf sliding doors
• Suitable for toughened safety glass and laminated sheet glass
• Low installation height
• Height adjustable door leaves
• Point fixing with glass patch retainer
• Suspension with suspension bolt
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness: 8, 10 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Sliding door fitting Junior 80/GP HAWA
Ceiling installation and wall mounting
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 940.81.006
Packing: 1 set
Order reference
Soft close device ..................................................... page 5.80
AH 5.121New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Built-in version 4Built-in version 3Built-in version 2Built-in version 1 Required glass cut-outs
Set consisting of Cat. No.
Running gear 2-wheel 2 pcs. 940.80.012
Suspension bolt M10 and mounting screws 2 pcs. 940.81.023
Glass patch retainer 2 pcs. 940.40.038
Track buffer with adjustable retainer 2 pcs. 940.80.041
One-way drilling jig 1 pc. 940.40.089
Rubber wall buffer 1 pc. 940.40.051
Height adjusting pin 1 pc. 940.40.090
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized 2,000 940.80.2003,000 940.80.3004,000 940.80.4006,000 940.80.600
Stainless steel coloured anodized 4,000 940.80.4046,000 940.80.604
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual
parts. Please order 2 sets for 2-leaf sliding doors. Please order cover caps and additional
components for the different built-in versions separately.
AH 5.122 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Features
• For 1- and 2-leaf sliding doors
• Suitable for toughened safety glass and laminated sheet glass
• Low installation height
• Height adjustable door leaves
• Point fixing with glass patch retainer
• Suspension with suspension bolt
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. door weight per leaf: 120 kg
• For glass thickness: 8, 10 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use of guide track with buffers
Sliding door fitting Junior 120/GP HAWA
Ceiling installation and wall mounting
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 941.20.006
Packing: 1 set
AH 5.123New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Built-in version 4Built-in version 3Built-in version 2Built-in version 1 Required glass cut-outs
Set consisting of Cat. No.
Running gear 2-wheel M12 2 pcs. 941.20.012
Suspension bolt M12 and mounting screws 2 pcs. 941.20.023
Glass patch retainer 2 pcs. 940.40.038
Track buffer with adjustable retainer 2 pcs. 941.20.041
One-way drilling jig 1 pc. 940.40.089
Rubber wall buffer 1 pc. 940.40.051
Height adjusting pin 1 pc. 940.40.090
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 941.20.2003,000 941.20.3004,000 941.20.4006,000 941.20.600
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual
parts. Please order 2 sets for 2-leaf sliding doors. Please order cover caps and additional
components for the different built-in versions separately.
AH 5.124 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Features
• For 1- and 2-leaf sliding doors
• Suitable for toughened safety glass and laminated sheet glass
• Low installation height
• Height adjustable door leaves
• Point fixing with glass patch retainer
• Suspension with suspension bolt
• Low wear and tear
• Quiet running action
• LGA tested to min. 100,000 cycles (EN1527)
Technical data
• Max. door weight per leaf: 160 kg
• For glass thickness: 8, 10, 12 and 12.7 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Sliding door fitting Junior 160/GP HAWA
Ceiling installation and wall mounting
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 941.60.005
Packing: 1 set
AH 5.125New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Built-in version 4Built-in version 2Built-in version 1 Required glass cut-outs
Set consisting of Cat. No.
Running gear 2-wheel M14 2 pcs. 941.60.012
Suspension bolt M14 and mounting screws 2 pcs. 941.60.023
Glass patch retainer 2 pcs. 940.40.038
Track buffer with adjustable retainer 2 pcs. 941.60.041
One-way drilling jig 1 pc. 940.40.089
Rubber wall buffer 1 pc. 940.40.051
Height adjusting pin 1 pc. 940.40.090
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 941.60.2003,000 941.60.3004,000 941.60.4006,000 941.60.600
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual
parts. Please order 2 sets for 2-leaf sliding doors. Please order cover caps and additional
components for the different built-in versions separately.
AH 5.126 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Accessories for sliding door fittings Junior 40/GP, 80/GP, 120/GP, 160/GP HAWA
Additional components for different built-in versions Length mm Cat. No.
Built-in version 1
Glass patch retainer – 940.40.038
Floor guide for use with the guide track – 940.40.039
Single guide track 2,500 940.41.7253,500 940.41.7356,000 940.41.760
Fixing set for single guide track à 5 pieces, required 2 pieces per meter
– 404.97.990
BBuilt-in version 2
Glass patch retainer – 940.40.038
Guide glide with mounting screws, for use with glass patch retainer
– 940.40.035
Guide track 24 x 24 mm 2,500 940.41.250
3,500 940.41.3506,000 940.41.600
Buffers for guide track 24 x 24 mm – 940.80.051
BBuilt-in version 3
Floor guide free of play for glass thicknesses of 8, 10, 12 and 12.7 mm
– 940.40.032
BBuilt-in version 4
Guide track 20 x 20 x 3 mm, drilled 2,000 941.00.9203,000 941.00.9304,000 941.00.9406,000 941.00.960
Self adhesive glide elements for glass thickness 8 mm, (Set of 6 pcs.)
– 940.40.033
Self adhesive glide elements for glass thickness 10 mm, (Set of 6 pcs.)
– 940.40.034
AH 5.127New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Square cover caps
Rounded cover caps
Cover caps
Plastic unfinishedPlastic chrome platedpolished
Plastic stainless steelcoloured
Plastic brass plated polished
Plastic chrome platedmatt
Cover caps: Material/Finish Packing Cat. No.
Square, for use with glass patch retainer Plastic chrome plated matt Set of 4 pcs. 940.41.028
Plastic stainless steel coloured Set of 4 pcs. 940.41.027
Plastic unfinished 1 pc. 940.41.024
Rounded, for use with glass patch retainer Plastic chrome plated matt Set of 4 pcs. 940.40.027
Plastic brass plated polished Set of 4 pcs. 940.40.028
Plastic stainless steel coloured Set of 4 pcs. 940.40.023
Plastic chrome plated polished Set of 4 pcs. 940.41.029
Plastic unfinished 1 pc. 940.41.023
Order reference
Glass door lock ....................................................... page 7.37
AH 5.128 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
GB = glass width, GH = glass height,
STB = sliding door width, STH = sliding door height
Required glass cut-outs, dimensions must be observed
Features
• For 1- and 2-leaf sliding doors
• Suitable for tempered safety glass
• Doors height adjustable without removing the glass fixings
• Extremely secure due to solid glass fixing
• Quiet running action
• Aluminium panel with clip-on rubber
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness: 8, 9.5 and 12 mm
Material
• Running gear with plastic rollers
• Floor guide free of play plastic
Installation information
• In case of 2-leaf sliding doors, ensure that the glass leaves
cannot knock against each other, use guide track with buffers
Sliding door fitting Junior 80/GL HAWA
Ceiling installation and wall mounting
Sliding door fitting set, without running track Cat. No.
Without soft closing mechanism 940.81.005
Packing: 1 set
AH 5.129New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Order reference
Catalogue numbers refer to 1 piece. When ordering individual components, please specify the required quantity.
Please order floor guide and cover caps separately.
Set consisting of Cat. No.
Running gear, 2-wheel M10 2 pcs. 940.80.012
Suspension carriage with M10 suspension screw 2 pcs. 940.81.017
Track buffer with adjustable retainer 2 pcs. 940.80.041
Glass fixing profile, length 240 mm 2 pcs. 943.31.020
Cover caps 1 pair 940.40.064
Mounting setfor 2 glass fixing profiles 1 pc. 940.40.098
Allen key 4 mm length 160 mm 1 pc. 940.40.097
Adjustment tool 1 pc. 943.31.029
AH 5.130 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Additional components Material Finish Length mm Cat. No.
Cover profile Aluminium Bright 1,200 940.41.402
Silver coloured anodized 1,200 940.41.405
Stainless steel coloured 1,200 940.41.408
Fixing set for single guide track à 5 pieces, required 2 pieces per meter
– For glass thickness 8 mm – 940.41.050
For glass thickness 9.5 mm 940.41.051
For glass thickness 10 mm – 940.41.052
Floor guide free of play for glass thicknesses of 8, 10, 12 and 12.7 mm
Steel Chrome plated matt – 940.40.032
Guide track 24 x 24 mm Aluminium Silver coloured anodized 2,000 941.00.920
3,000 941.00.9304,000 941.00.9406,000 941.00.960
Self adhesive glide elements, Set of 6 pcs. – For glass thickness 8 mm – 940.40.033
Self adhesive glide elements, Set of 6 pcs. – For glass thickness 10 mm – 940.40.034
Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.80.2003,000 940.80.3004,000 940.80.4006,000 940.80.600
Stainless steel 4,000 940.80.4046,000 940.80.604
Order reference
Soft close device .................................................... page 5.80
Sliding door fitting Junior 80/GL HAWA
AH 5.131New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Fixed glass panels for Junior 40/GP HAWA
Features
• For partitioning systems
• Suitable for toughened safty glass and laminated sheet glass
• No glass preparation required
Technical data
• Max. door weight per leaf: 40 kg
• For glass thickness:
Tempered safety glass: 10 and 12 mm
Laminated glass: 10–12 mm
Material/Finish
• Aluminium clear anodized
Individual components Length mm Cat. No.
Running track with fixed glass panels 2,000 940.40.2063,000 940.40.3064,000 940.40.4066,000 940.40.606
Cover profile for running track 1,250 940.40.1323,000 940.40.307
Floor/wall profile 4,000 940.41.5406,000 940.41.560
Rubber profile Roll 10 m 940.41.053
Floor/wall glass fixing piece 50 940.41.054
Vertical seal for Junior set 40/80 HAWA 2,500 940.41.8253,500 940.41.835
Insert rubber profile on both sides
(double order quantity)
AH 5.132 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Insert rubber profile on both sides
(double order quantity)
Features
• For partitioning systems
• Suitable for toughened safty glass and laminated sheet glass
• No glass preparation required
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness:
Tempered safety glass: 10 and 12 mm
Laminated glass: 10–12 mm
Material/Finish
• Aluminium silver coloured anodized
Fixed glass panels for Junior 80/GP, 80/GL HAWA
Individual components Length mm Cat. No.
Running track with fixed glass panels 2,000 940.80.2063,000 940.80.3064,000 940.80.4066,000 940.80.606
Cover profile for running track 1,250 940.40.1323,000 940.40.307
Floor/wall profile 4,000 940.41.5406,000 940.41.560
Rubber profile black Roll 10 m 940.41.053
Floor/wall glass fixing piece 50 940.41.054
Vertical seal for Junior set 40/80 HAWA 2,500 940.41.8253,500 940.41.835
AH 5.133New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Insert rubber profile on both sides
(double order quantity)
Features
• For partitioning systems
• Suitable for toughened safty glass and laminated sheet glass
• No glass preparation required
Technical data
• Max. door weight per leaf: 120 kg
• For glass thickness:
Tempered safety glass: 10 and 12 mm
Laminated glass: 10–12 mm
Finish
• Aluminium, coloured anodized
Fixed glass panels for Junior 120/GP HAWA
Individual components Length mm Cat. No.
Running track with fixed glass panels 2,000 941.20.2063,000 941.20.3064,000 941.20.4066,000 941.20.606
Cover profile for running track 2,000 940.40.2073,000 940.40.307
Floor/wall profile 4,000 940.41.5406,000 940.41.560
Rubber profile Roll 10 m 940.41.053
Floor/wall glass fixing piece 50 940.41.054
Vertical seal for Junior set 120 HAWA 2,500 941.20.2573,500 941.20.357
AH 5.134 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Junior 80/G HAWA
Features
• For 1- and 2-leaf sliding doors
• Suitable for tempered safety glass: 8–16 mm
• Height adjustable door leaves
• Suspension with clamp shoe
• Low wear and tear, quiet running action
• Soft and self closing mechanism (optional)
Technical data
• Max. door weight per leaf: 80 kg
Material/Finish
• Aluminium silver coloured anodized
Ceiling installation
Version 1 Version 2 Version 3
Floor guide
Sliding door fitting set, (without running track and floor guide) Cat. No.
Without soft closing mechanism 940.84.007
Section trolley hanger and guide
AH 5.135New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Version 1 Versions 2 and 3
Set consisting of For 1 door Cat. No.
Running gear 2-wheel 2 pcs. 940.80.012
Support profile with suspension carriage and suspension screw M10 2 pcs. 940.80.019
Track buffer with adjustable retainer 2 pcs. 940.80.041
Cover cap for support profile 2 pcs. 942.56.029
Rubber wall buffer 1 pcs. 940.40.051
Spanner for suspension carriage 1 pcs. 940.80.092
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.80.2003,000 940.80.3004,000 940.80.4006,000 940.80.600
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Please order floor guide separately.
Order reference
Soft close device ..................................................... page 5.80
Cut-out dimensions
Note
Required glass cut-out dimensions must be observed.
AH 5.136 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Symmetric 80/G HAWA
Sliding door fitting set, without running track, without floor guide Cat. No.
For 2-leaf sliding door 940.81.002
Features
• For 2-leaf sliding doors
• Symmetrical opening of 2 sliding doors
• Suitable for tempered safety glass 8-16 mm
• Door height adjustable
• Suspension glass clamp connection
• Low wear and tear
• Quiet running action
Technical data
• Max. door weight per leaf: 80 kg
Ceiling installation
Version 1 Version 2 Version 3
Floor guide
Version 1 Versions 2 and 3
Cut-out dimensions
Note
Required glass cut-out dimensions must be observed.
Packing: 1 set
Note
Can be used for all floor guide versions. See Junior 80/G HAWA.
Please order separately.
AH 5.137New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of For 2 doors Cat. No.
Running gear 2-wheel 4 pcs. 940.80.012
Support profile with suspension carriage and suspension screw M10 4 pcs. 940.80.018
Track buffer with adjustable retainer 1 pcs. 940.80.041
Cover cap for support profile 4 pcs. 942.56.029
Floor mounted door stop 57 x 28 x 39 mm (L x W x H) 2 pcs. 940.40.052
Spanner for suspension carriage 1 pcs. 940.80.092
Deflection roller 2 pcs. 940.80.075
Clamping piece for toothed belt 2 pcs. 940.80.083
Toothed belt 10 m for 2 sliding doors with width of max. 1,200 mm 1 pcs. 940.80.077
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.80.2003,000 940.80.3004,000 940.80.4006,000 940.80.600
Order reference
Please order floor guide separately.
Order reference
Fixed glass panels ................................................... page 5.140
Features
• For telescopic opening of 2 sliding doors to the right and to the left
• Suitable for tempered safety glass
• Door height adjustable
• Suspension glass clamp connection
• Low wear and tear
• Quiet running action
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness: 8-16 mm
• Door width: 500-1,000 mm
AH 5.138 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Telescopic 80/G HAWA
Sliding door fitting set, without running track, without floor guide Cat. No.
For 2-leaf sliding doors 940.80.010
Packing: 1 set
Cut-out dimensions
Note
Required glass cut-out dimensions must be observed.
Ceiling installation and wall mounting
Versions 2 and 3
Sliding door width calculation
STB = Sliding door width
LMB = Internal width measurement
M = Sliding door handle + safety clearance
Floor guide
Telescopic without fixed panel Telescopic with fixed panel
P = Door overlap (min. 75 mm)
LS = Running track
AH 5.139New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Order reference
Please order floor guide separately.
Set consisting of For 2 doors Cat. No.
Running gear 2-wheel 4 pcs. 940.80.012
Support profile with suspension carriage and suspension screw M10 4 pcs. 940.80.018
Track buffer with adjustable retainer 2 pcs. 940.80.041
Cover cap for support profile 4 pcs. 942.56.029
Glass retainer for glass thicknesses 8, 10, 12, 12.7, 14, 16 mm 8 pcs. 940.84.024
Deflection roller with long mounting plate 1 pc. 947.00.048
Deflection roller with short mounting plate 1 pc. 947.00.049
Wide follower 1 pc. 947.00.050
Toothed belt, glass-fibre reinforced, length 2.7 m 1 pc. 947.00.054
Wall mounting/ceiling installation for complete toothed belt 1 pc 947.00.053
Carrier plate for wide follower 1 pc. 947.00.051
Carrier carriage 3 pcs. 940.80.016
Rubber wall buffer 1 pc. 940.40.051
Guide (complete) 1 pc. 940.80.037
Floor guide, for bottom support and glass fixing profile 1 pc. 940.84.032
Track Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 940.80.2003,000 940.80.3004,000 940.80.4006,000 940.80.600
Order reference
Fixed glass panels ................................................... page 5.140
AH 5.140 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Fixed glass panels for Junior 80/G HAWA
Ceiling installation
Cut-out dimensions
Note
Required glass cut-out dimensions must be observed.
Version 1 Versions 2 and 3
Features
• Partition system
• Suitable for tempered safety glass laminated glass
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness: 8-16 mm
Note
Fixed glass panels can be used in combination with all floor guide
versions. See Junior 80/G
AH 5.141New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Order reference
Order only 1 support and glass fixing profile for floor guide version 1.
Individual components Length mm Cat. No.
Cover cap for running track – 940.80.060
Support and glass fixing profile, glass thickness 8–10 mm 3.250 942.44.031
6,500 942.56.765
Cover for glass fixing profile – 942.44.060
Support and glass fixing profile, glass thickness 12–16 mm 3.250 942.56.832
6,500 942.56.865
Cover for glass fixing profile, glass thicknesses 12–16 mm – 942.44.061
Glass retainer for glass thicknesses 8, 10, 12, 12.7, 14, 16 mm(4 ps. required for each support and glass fixing profile)
– 940.84.024
Floor guide, for glass thicknesses 8, 10, 12 (12.7) mm (Version 1) – 940.40.032
Floor guide, for bottom support and glass fixing profile (Version 2) – 940.84.032
Guide track 31 x 28 mm, pre-drilled (Version 3) 2,000 946.03.2004,000 946.03.4006,000 946.03.600
Guide piece with zero clearance, 14 mm, with carriage (Version 3) – 946.12.060
Connecting pin for guide track (order 2 pcs. for each guide track connection) – 946.12.090
Set consisting of Length mm Cat. No.
Fixing plate, 2 pcs. required for each support and glass fixing profile – 940.81.024
Fixing plate for Telescopic 80/G, 2 pcs. required for each support and glass fixingprofile
– 940.81.025
Bottom support profile for fixed glass panels 6,000 946.36.960
Order reference
Junior 80/G ..............................................................page 5.134
AH 5.142 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Junior 250/G HAWA
Ceiling installation and wall mounting
Sliding door fitting set, without running track, without floor guide Cat. No.
Without soft closing mechanism 942.56.003
Features
• For 1- and 2-leaf sliding doors
• Suitable for tempered safety glass
• Height adjustable door leaves +/– 15 mm
• Suspension with clamp installation
• Low wear and tear
• Quiet running action
Technical data
• Max. door weight per leaf: 250 kg
• For glass thickness: 8-16 mm
Version 1 Version 2 Version 3
Section trolley hanger and guide
Floor guide
AH 5.143New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Set consisting of For 1 door Cat. No.
Running gear 2-wheel 2 pcs. 942.56.012
Support profile with suspension carriage and suspension screw M10 2 pcs. 942.56.023
Track buffer with adjustable retainer 2 pcs. 942.56.041
Cover cap for support profile 2 pcs. 942.56.029
Rubber wall buffer 1 pc. 941.60.051
Spanner for suspension carriage 1 pc. 940.40.092
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Please order floor guide separately.
Material Finish Length mm Cat. No.
Running track Aluminium Silver coloured anodized
2,000 942.56.9203,000 942.56.9304,000 942.56.9406,000 942.56.960
Connecting pin set for running track (comprises 2 pcs.)
– – – 942.56.090
Cut-out dimensions
Version 1 Versions 2 and 3
Note
Required glass cut-out dimensions must
be observed.
Order reference
Fixed glass panels ................................................... page 5.140
AH 5.144 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Junior side-fix angle profile HAWA
Features
• Elegant design with concealed mounting
• Continuous profile for simple leveling
• Easy and fast to install
• No drilling of running track and angle profile
• No additional support structure required
• Can be used for timber or glass sliding doors
Technical data
• Max. door weight per leaf: 40 or 80 kg
Material/Finish
• Angle profile: Aluminium clear anodized
• Cover caps: Plastic grey
Angle bracket for timber sliding door applications
Angle bracket for glass sliding door applications
Junior 40
Junior 40
Junior 80
Junior 80
Easy and fast installation of angle profile and running track
AH 5.145New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Order reference
Please order running tracks and fitting sets separately.
For wall mounted sliding door applications with Junior 40 running tracks Length mm Cat. No.
Angle profile, for glass sliding doors, pre-drilled 2,000 940.40.2014,000 940.40.4016,000 940.40.601
Angle profile, for timber sliding doors, pre-drilled 2,000 940.40.2034,000 940.40.4036,000 940.40.603
Fastening bolts and nuts, set of 10 pcs. (sufficient for 2,000 mm track length) 1 set 940.40.099
Cover caps, for angle profile and running track for glass sliding doors 1 pair 940.40.061
Cover caps, for angle profile and running track for timber sliding doors 1 pair 940.40.063
For wall mounted sliding door applications with Junior 80 running tracks Length mm Cat. No.
Angle profile, for glass sliding doors, pre-drilled 2,500 940.80.2514,000 940.80.4016,000 940.80.601
Angle profile, for timber sliding doors, pre-drilled 2,500 940.80.2034,000 940.80.4036,000 940.80.603
Fastening bolts and nuts, set of 10 pcs. (sufficient for 2,000 mm track length) 1 set 940.80.099
Cover caps, for angle profile and running track for glass sliding doors 1 pair 940.80.061
Cover caps, for angle profile and running track for timber sliding doors 1 pair 940.80.063
AH 5.146 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Assembly wedge
Cat. No.
Assembly wedge, 2 pcs. 940.80.050
Features
• Suitable for Junior 80/B and 120/B and Silent 150/B
• For end fixing of sliding doors running in the ceiling
• Allows installation and removal of the sliding doors without
disassembly of the door lining and cover
Fixing
Consider for the constructions:
• If a pelmet is fitted, this must either
be removable or a 100 mm
wide removable lock strip must
be fitted on the lock side.
• The sliding door must run
max. 5 mm in the ceiling or
in the top of the door lining
• When closed, the sliding door must not protrude more than
50 mm into the cavity
Double-sided adhesive tape
Features
• For glass edge protection profile
Length Cat. No.
Roll at 50 m each 943.19.000
Self-adhesive glide elements
For glass thickness mm Cat. No.
8 940.40.03310 940.40.034
Features
• Set of 6 pcs.
AH 5.147New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Centering door stop
Features
• For doors without lock
• With rubber buffer
• Mounting on the wall
Material/Finish
• Plastic grey
Sealing profile
Features
• For glass thickness: 8–10 mm
• For glass distance: 4 mm
• Self adhesive
Material
• Rubber
Dimension mm Cat. No.
60 x 33 x 14 941.24.042
Length Colour Cat. No.
Roll at 5 m each Black 404.95.321
Roll at 10 m each 404.95.322
Roll at 5 m each Transparent 943.31.205
Roll at 10 m each 943.31.210
Vertical sealing profile
Features
• For all-glass sliding doors with fixed glass panels
• For glass thickness: 8–12.7 mm
Material
• Aluminium
Dim. A mm Colour Length mm Cat. No.
13–17.5 Silver coloured anodized
2,500 940.41.8253,500 940.41.835
18–19.5 2,500 941.19.7253,500 941.19.735
20–21.0 2,500 941.20.2573,500 941.20.357
13–17.5 Stainless steel coloured
2,500 940.41.8263,500 940.41.836
18–19.5 2,500 941.19.7263,500 941.19.736
AH 5.148 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Glass door seals
For glass thicknesses mm Length mm Cat. No.
8–10 2,170 950.17.60010–12 2,400 950.17.814
Features
• Soft PVC, transparent
• Protection against cold, draught and moisture
Packing: 1 pc.
Features
• Soft PVC, transparent
• Protection against cold, draught and moisture
For glass thicknesses mm Length mm Cat. No.
8–10 2,170 950.17.62010–12 2,400 950.17.621Packing: 1 pc.
For glass thicknesses mm Length mm Cat. No.
8–10 2,170 950.17.64010–12 2,400 950.17.641
Features
• Soft PVC, transparent
• Protection against cold, draught and moisture
Packing: 1 pc.
For glass thicknesses mm Length mm Cat. No.
8–10 2,170 950.17.63010–12 2,400 950.17.631Packing: 1 pc.
Features
• Soft PVC, transparent
• Protection against cold, draught and moisture
AH 5.149New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Flush pull handle
Features
• For glass thickness 8–10 mm, drill whole Ø50 mm
• For clamp fixing
Material/Finish Cat. No.
Aluminium stainless steel coloured anodized 981.49.340
Material/Finish Cat. No.
Aluminium stainless steel coloured anodized 981.49.330
3912
Features
• For glass thickness 8–10 mm, drill whole Ø48 mm
• For clamp fixing
Material/Finish Cat. No.
Stainless steel (304) matt 981.52.530
Stainless steel Polished 981.52.531
Material/Finish Cat. No.
Stainless steel (304) matt 981.52.520
Stainless steel Polished 981.52.521
Features
• For glass thickness 8–10 mm, drill whole Ø50 mm
• For clamp fixing
Features
• For glass thickness 8–10 mm, drill whole Ø48 mm
• For clamp fixing
AH 5.150 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Purolino 80 HAWA
63
173
33
Ceiling installation and wall mounting
Sliding door fitting set, without running track, without floor guide Cat. No.
Without soft closing mechanism 940.83.000
Wall connection
Features
• For 1- and 2-leaf sliding doors
• Suitable for toughened safety glass and laminated sheet glass
• Glass retention and wedge suspension technology integrated in
the top track
Technical data
• Max. door weight per leaf: 80 kg
• For glass thickness: 8, 10, 12, and 12.7 mm
AH 5.151New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Cut-out dimensions
Set consisting of For 1 door Cat. No.
Left running gear, 2 rollers 1 pc. 940.83.012
Right running gear, 2 rollers 1 pc. 940.83.013
Suspension wedge for glass fixing, left 1 pc. 940.83.022
Suspension wedge for glass fixing, right 1 pc. 940.83.023
Track buffer, with adjustable retaining spring, left 1 pc. 940.83.040
Track buffer, with adjustable retaining spring, right 1 pc. 940.83.041
Track and accessories Material Finish Length mm Cat. No.
Running track set,wall mounted
Aluminium Silver coloured anodized
2,000 940.83.3203,000 940.83.3306,000 940.83.360
Stainless steel coloured
2,000 940.83.3213,000 940.83.3316,000 940.83.361
Running track set,ceiling mounted
Aluminium Silver coloured anodized
2,000 940.83.4203,000 940.83.4306,000 940.83.460
Stainless steel coloured
2,000 940.83.4213,000 940.83.4316,000 940.83.461
Running track set,integrated ceilinginstallation
Aluminium Silver coloured anodized
2,000 940.83.5203,000 940.83.5306,000 940.83.560
Stainless steel coloured
2,000 940.83.5213,000 940.83.5316,000 940.83.561
Floor guide
Floor guide Floor mounted door stop
AH 5.152 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Material Finish For glass thickness mm Length mm Cat. No.
Glass fixing partsfor one slidingdoor, tempered safety glass
Aluminium – 8 – 940.83.02410 940.83.02512 (12.7) 940.83.026
Glass fixing parts for one slidingdoor, laminated glass,with disposable drilling jig
– – 8 – 940.83.02710 940.83.02812 (13) 940.83.029
Floor guide Aluminium Chrome platedmatt
8–13 – 941.18.032
Stainless steel coloured
941.18.033
Floor mounted door stop,57 x 28 x 39 mm (L x W x H)
Aluminium Chrome platedmatt
8–16 57 940.40.052
Stainless steel coloured
940.40.053
Cover caps with threaded pin,1 pc. 65 x 60 mm (W x H)
Metal Chrome platedmatt
– – 940.83.020
Stainless steel coloured
940.83.021
Cover caps, 1 set,65 x 60 mm (W x H)
Plastic Anthracite All set components suittempered safety glass8 mm
– 940.83.030
End profile set, wall-hung Aluminium Silver coloured anodized
– 2,500 940.83.125
Stainless steel coloured
940.83.126
Silver coloured anodized
3,500 940.83.135
Stainless steel coloured
940.83.136
Rubber seal for end profile set Plastic – – 2,500 940.83.1273,500 940.83.137
Wall profile set, wall-hung, with support profile
Aluminium Silver coloured anodized
– 2,500 940.83.225
Stainless steel coloured
940.83.226
Silver coloured anodized
3,500 940.83.235
Stainless steel coloured
940.83.236
Sliding door fitting Purolino 80 HAWA
AH 5.153New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Material Finish For glass thickness mm Length mm Cat. No.
Wall profile, 38 x 21 mm (W x H)
Aluminium Silver coloured anodized
Tempered safety glass8, 10, 12 mm (12.7),laminated glass8.7–12.7 mm
2,500 941.24.925
Stainless steel coloured
941.24.825
Silver coloured anodized
3,500 941.24.935
Stainless steel coloured
941.24.835
Rubber buffer for wall profile,28 x 21 mm (W x H)
Plastic Black Tempered safety glass8, 10, 12 mm (12.7),laminated glass8.7–12.7 mm
Roll 2.5 m each 941.24.081
Roll 3.5 m each 941.24.082
Centring unit for wall profile Plastic Black – – 941.24.043
Centring door stop,for glass doors
Plastic Grey – – 941.24.042
AH 5.154 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Built-in version 2Built-in version 1
In order to guarantee optimum sliding action of curved
sliding doors, the mounting points of the suspension
plates must be positioned in this way that the sliding
door is kept within their axis of gravity (dimension N).
Features
• For 1- and 2-leaf sliding doors
• Suitable for curved toughened glass
• Suspension with suspension bolt
• Extremely light and quiet curved running action
• Low wear and tear
Technical data
• Max. door weight per leaf: 70 kg
• For glass thickness: 8 and 10 mm
Material/Finish
• Running gear with nylon tyred steel wheels
• Suspension and glass retention profile aluminum
• Floor guide free of play plastic
Safety information
• In case of 2-leaf sliding doors edge protection needs to be
applied, that glass leaves aren’t knock against their edges
please see page 5.147
Sliding door fitting Media 70/GB HAWA
AH 5.155New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Individual components Length mm For 1-leaf Cat. No.
Running gear 2-wheel – 2 pcs. 942.17.012
Suspension screw M8 – 2 pcs. 942.17.023
Suspension and glass retention profile 1,000 – 942.71.1006,000 942.71.600
Cover cap, plastic grey – – 942.44.021
Cover cap, plastic black 940.88.020
Track bufferfor 1-leaf sliding doors – 2 pcs. 942.14.041
Floor guide, free of play – 1 pc. 940.40.032
Alternative guide with guide track, selecting for 2-leaf sliding doors Material Finish Length mm Cat. No.
Guide element, free of play, 13 mm Plastic – – 942.07.030
Guide track, 24 x 24 mm Aluminium Clear anodized 2,500 940.81.2503,500 940.81.3506,000 940.81.600
Buffers for guide track 24 x 24 mm Steel Galvanized – 940.80.051
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Running track Material Finish Length mm Cat. No.
Aluminium Clear anodized 2,500 942.17.2503,500 942.17.3506,000 942.17.600
AH 5.156 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Sliding door fitting Rondo 150/GB HAWA
Features
• For 1- and 2-leaf sliding doors
• For curved single-pane toughened glass
• Suspension with suspension plate, supporting and
glass holding profile
• Optional guide track with guide piece or floor guide free from play
• Perfect curve
• High strain
• Low wear and tear
Technical data
• Max. weight per door leaf 150 kg
• For glass thickness 8 and 10 mm
Material/Finish
• Running gear with steel rollers
• Suspension profile steel galvanized
• Floor guide free of play plastic
• In case of 2-leaf sliding doors edge protection needs to be
applied, that glass leaves aren’t knock against their edges
please see page 5.147
In order to guarantee optimum sliding action of curved sliding doors,
the mounting points of the suspension plates must be positioned in
this way that the sliding door is kept within their axis of gravity
(dimension N).
Built-in version 1 Built-in version 2
AH 5.157New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Running track Material Length mm Cat. No.
For wall installation Stainless steel (304) 3,000 942.42.3016,000 942.42.601
For ceiling installation with mounting brackets Stainless steel (304) 3,000 942.43.3016,000 942.43.601
Individual components Length mm Cat. No.
Running gear 2-wheel – 942.44.012
Top fixing plate, with hanger bolt M12 and fixing screws
– 941.50.022
Suspension and glass retention profile 1,000 942.71.1006,000 942.71.600
Cover cap, plastic grey – 942.44.021
Cover cap, plastic black 940.88.020
Track buffer – 942.42.041
Floor guide, free of play – 940.40.032
Order reference
Catalogue numbers refer to 1 piece. Please indicate the quantities when ordering individual parts. Please order 2 sets for 2-leaf sliding doors.
Alternative guide with guide track, selecting for 2-leaf sliding doors Material Finish Length mm Cat. No.
Guide element, free of play, 13 mm Plastic – – 942.07.030
Guide track, 24 x 24 mm Aluminium Clear anodized 2,500 940.81.2503,500 940.81.3506,000 940.81.600
Buffers for guide track 24 x 24 mm Steel Galvanized – 940.80.051
AH 5.158 New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).
Sliding and Folding Door FittingsSliding Door Fittings
5
Multi purpose suspension profile for
use with custom glass rails or frames.
Internal floor guideGuide channelFloor guide play free
Features
• For heavy glass sliding doors
• High quality hard wearing system with precision manufactured
components
• Running gear with steel wheels
• Smooth and quiet operation
Technical data
• Max. door weight per leaf: 250 kg
• For glass thickness: 10–18 mm
Material/Finish
• Glass suspension retainer profile aluminium nature
• Bottom guide channel aluminium clear anodized
• Running gear with steel wheels
Sliding door fitting Super 250/G HAWA
AH 5.159New products and systems: www.hafele.com
We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e (S
EA
Arc
hite
ctur
al H
ardw
are
2015
).Sliding and Folding Door FittingsSliding Door Fittings
5
Order reference
Please order glass suspension retainer profiles and locks separately. Catalogue numbers refer to 1 piece.
When ordering individual components, please specify the required quantity.
Individual components, please order separately. For 1-leaf Cat. No.
Running gear, M12 with steel wheels 2 pcs. 942.44.012
Suspension plate, with hanger bolt M12 2 pcs. 942.44.020
Track buffer to be drilled into the track 2 pcs. 942.42.041
Cover capfor suspension retainer profile,rubber grey 2 pcs. 940.80.029
Cover cap, plastic grey, for suspension retainer profile (up to 12 mm glass)
2 pcs. 942.44.021
Rubber wall buffer 1 pc. 941.60.051
Glass retainer 4 pcs. 940.84.024
Running track Material Length mm Cat. No.
For side mounting Stainless steel (304) 3,000 942.42.3016,000 942.42.601
For ceiling mounting with mounting brackets Stainless steel (304) 3,000 942.43.3016,000 942.43.601
Bottom guide channels Length mm Cat. No.
Bottom guide channel, predrilled, 20 x 3 mm 2,000 941.00.9203,000 941.00.9304,000 941.00.9406,000 941.00.960
Bottom guide channel, predrilled 2,000 946.03.2004,000 946.03.4006,000 946.03.600
Grooved dowel pin, for connecting lengths of bottom guide channel 946.03.200/400/600
– 946.12.090
Order reference
Fixed glass panels ................................................... page 5.140