st-led - the l.c.doane company – designers and ... l.c. doane company po box 700, ivoryton, ct...
TRANSCRIPT
© The L.C. Doane Company PO Box 700, Ivoryton, CT 06442 tel: 860.767.8295 fax: 860.767.1397 www.lcdoane.com Rev. 112516
PRODUCT SPECIFICATION
ST-LEDSecurity LED Surface Ceiling
Mounting
Housing
Finish
Hardware
Certifications
The ST series is designed for use in all levels of security facilities and high abuse applications.
Surface-mounts to ceilings.
Die-formed cold rolled steel with seams welded and ground smooth. Stainless steel available.
Polyester powder-coated after phosphate pretreatment for superior adhesion and corrosion resistance. Brushed stainless steel available.
Recessed, stainless steel, tamper-proof fasteners.
UL Listed damp or wet location. IP54 rated. Covered ceilings only.
fourNDX U
Material Gauge18 gauge, minimum security16 gauge, medium security14 gauge, maximum security 12 gauge, ultra maximum security
seven120277VAR
Voltage120 V, 60 Hz277 V, 60 HzVariable, 120-277 V, 50/60Hz
fiveCS
MaterialCold rolled steelStainless steel
ten30323638909296
External Lens.187 in. clear polycarbonate.250 in. clear polycarbonate.375 in. clear polycarbonate.500 in. clear polycarbonate.187 in. clear tempered glass.250 in. clear tempered glass.375 in. clear tempered glass
elevenAPTPPH
Door FastenersStainless steel allen head with pinStainless steel torx head with pinPhillips head, non-security
thirteenDW
UL ListingDamp LocationWet Location
Modifications are available to meet custom requirements.
sixRW
FinishBrushed stainless steelWhite
fourteenSO2CCUEMFH
NL-LEDIMS
OptionsSpecified output*Two-circuit wiredCanadian UL ListingEmergency battery backupFuse and holderNight light, LEDIntegral Occ Sensor
* Indicated as SO(xx/xxxx). Specified output, Input watts / delivered lumens to be determined based on specified requirements
ST - -
one two three four five six seven eight nine ten eleven twelve
- --
thirteen
/
twelveAK
Electrical Access2.250 in. diameter access hole0.875 in. diameter knockout(s), std
DoorOne piece, die-formed cold rolled steel door with 14 gauge lens retainers and a full length welded pin piano hinge. Stainless steel available.
Job Name
Fixture Type
Catalog No.
Approval Date
25.5 in.
17.5 in. 9/16 in. by 1 in. mounting 20.75 in. ø 0.875 in. knockout7 in.
49.5 in.
4.5 in.
12 in. 8 in.
12 in.
two1L2L3L
LED RowsOneTwoThree
three354050
Color Temperature3500K4000K5000K
eightDM
Driver0-10Vdc Dimming, standard
nine1225312151675
Internal LensOptic Plus LED diffusing acrylic lens, std.125 in. K12 prismatic acrylic.125 in K12 prismatic polycarbonate.156 in. K12 prismatic polycarbonate.187 in. K12 prismatic polycarbonate.156 in. C73 prismatic tempered glass
one24
Luminaire Size2 ft fixture4 ft fixture
Internal LensOptic Plus lens (standard) completely hides diode image while providing minimum 95% light transmission.
fourteen
-
WiringDriver provided with pre-wired 3-wire self-aligning input power quick disconnect and 2-wire quick disconnect to LED module.
Driver0-10Vdc dimming, Range 10%-100%-40°C Min. starting temperature, >0.9 PF, <20% THD.
The L.C. Doane Company PO Box 700, Ivoryton, CT 06442 tel: 860.767.8295 fax: 860.767.1397 www.lcdoane.com
PRODUCT SPECIFICATIONST-LED
Coefficients of Utilization - Zonal Cavity Method (ST-LED 1x4)
Lumens
9055
Input Watts
82.2 watts
Lumens / Watt
110
Photometric Data for a 1x2 fixture with three rows (Full Output)
CCT
4000K
CRI
>80
Lumens
18110
Input Watts
164.3 watts
Lumens / Watt
110
Photometric Data for a 1x4 fixture with three rows (Full Output)
CCT
4000K
CRI
>80
LED Life
>100,000
LED Life
>100,000
ST-LED - Polar Candela Distribution (ST-LED 1x4) ST-LED - Polar Candela Distribution (ST-LED 1x2)
Rev. 112516