pearl mannequin

8/8/2019 Pearl Mannequin

http://slidepdf.com/reader/full/pearl-mannequin 1/5

An Introduction to MannequinsJust about every clothing store uses mannequins. There are many types of mannequins madeof different materials including wood, wax, fiberglass, and plastic. Some mannequins are set

in one pose, while others have adjustable arms and legs. There are mannequins that look likemen, women, and children. Some mannequins are even made to resemble famous movie starsand celebrities.

Mannequins were invented over 100 years ago. While mannequins are mostly used to displayclothing, they have some other uses as well. Life-size dummies are used in car crash tests andother mannequins are used in CPR training classes. These types of mannequins make it

possible for people to learn the effects that certain traumatic events could have on the human body without having to actually put anyone in harm's way.

There are many types of mannequins used to model clothing. The most common type is thelife-size mannequin. These mannequins are the same size as a real person and have arms,legs, hands, feet, and a head. Most of them can be posed in different positions to give them amore lifelike look. They are used to model pants, shirts, dresses and shoes, as well as other types of clothing. These mannequins can look like males, females, or children. Other mannequins consist of only a torso on a stand. These can only display shirts and blouses, butare easier to maintain and take up less space than full-size mannequins.

Mannequins used to model clothing are usually made to resemble people who are physicallyfit in order to show a flattering picture of what people will look like in the clothes beingmodeled.

Mannequins serve several purposes. It is easy to take them for granted or not even noticethem, but they are vital to the clothing industry as well as car safety tests and CPR classes.

Mannequins Info provides detailed information about display, female, and child mannequins,and advice on where to buy mannequins for sale, plus used and wholesale mannequins, andmore. Mannequins Info is the sister site of Store Fixtures Web .

H ow to Practice Applying Makeup on a Mannequin's H ead

Whether you're a budding cosmetologist or just want to learn how to apply makeup properly,a mannequin is a good place to start. Mannequins give you a simple way to practice basicmakeup application. Using a mannequin allows you to make mistakes, start over or practice

multiple looks in one application.



Instructions

1. 1

Prep the mannequin head (see Resources for suppliers) by using an alcohol-basedwipe to clean the entire surface. Some practice mannequins come with a removablecover just for makeup application. If you have one, put it on the mannequin head and

clean it in the same way. Let the surface dry completely.

2 . 2

Choose your makeup type

Choose your type of makeup. If you want to apply powder makeup, make surefoundation, eyeshadow and blush are in powder form. If applying liquid or creamfoundation, follow with cream-based blush and eye shadows.Apply foundation. Liquid or cream foundation should be applied with a damp makeupsponge. Blend a thin layer over entire face. Let dry for a minute.If using powder or mineral foundation, dip and swirl your powder brush over powder and apply to entire face, dusting lightly.



3 . 3

Apply eyeshadow. The mannequin's eyelid will be thinner than a human's lid, so use asmall brush. Keeping application light, apply a neutral base color (taupe, beige or champagne) from lid to brow bone.If using powder shadow, apply a contour color. Use a deeper tone of the same color,

(brown, bronze or gold) and apply just in the crease from the inner corner of the eyeout to the edge of the lashes. Clean the brush with a tissue and blend.

4 . 4

Apply eyeliner (marker tip is easiest for beginners). Using a liquid liner, apply a thinline from the beginning of the lash line to outer corner. Let dry. If the line looks tooharsh, lightly smudge with a clean, dry brush or your finger.

5 . 5

Apply blush from cheekbone to temple.

Apply blush. Powder blush should be applied with a brush. Cream blush should beapplied with a clean, damp makeup sponge or fingertips. For cream blush, use threesmall dots. For powder, swirl brush in compact and tap to remove excess. Apply blush

from cheekbone, sweeping up to the temple.

6 . 6

Apply lipstick or lip gloss. For lipstick application, use a lip brush. Dip the brushgently into the tube and apply to lip, starting in the center and working out. Dip againand carefully outline the lips. If color is too bright or too heavy, blot with a tissue or fingertip.For lip gloss, use the wand inside the tube. For pot gloss, use a clean lip brush. Applya thin layer, working from the outside of the lips in.

FRP mannequins mold method of makingPosted by admin on August 1 5, 20 10 9:1 2 am

First, the choice of materials:A, the original model materialThe original model is to create high-quality fiberglass mold of the most important

prerequisite. The original model of the base material of choice is primarily based on the typeand size of mold, the mold and the production of different types of experience gained to



decide. Based on thermodynamic principle overlay, the original mold surface material of different density, joints, screw holes and other defects in the elimination of a layer of heattransfer rate must be consistent with some of the rigid material of the substrate surfacetreatment material. The kinds of substrates, using easy to polish the surface of materials to fixthe contours of the original model size accuracy, smoothness, high brightness surface usingair dry gel coat to get the high surface brightness of the original model.

Size of the original mold surface contours of the accuracy, smoothness and brightnessdirectly determine the quality of the glass mold.Ensure that the size of the original mold surface contours of the accuracy, smoothness of thematerial needs to have the following characteristics:1. Air dry the spray can be quickly accumulated a certain thickness2. Low-gap hole, easily polished modification3. Good heat resistanceEnsure that the original model of high surface brightness of the material needs to have thefollowing characteristics:1. Air dry the spray2. Low-gap hole, easy water mill3. Good heat resistance4. Smooth surface, fineB, the original mold surface of mold release material requirements1. Ensure that the stripping2. Does not affect the surface gloss of the original model3. Stripping material is not transferred to the mold

C, mold material:To measure the level of mold production tooling gel coat is the most important surface

brightness, smoothness, gloss, surface porosity. This is determined by the level of technology. The mold surface quality to keep the length of time, which is often said that thedie life, material properties are determined by mold.Tooling gel coat:There are currently tooling gel coat mold gel coat and vinyl between the unsaturated

polyester tooling gel coat.Tooling gel coat of resin to give the final structure of the mold surface mechanical strength,

brightness, weather resistance, chemical resistance and flexibility.Tooling gel coat of the operation is a vital step in mold making, mold gel coat is the mold,after all both overlay and structural framework for the mold surface gel coat layer services.Tooling gel coat products than the use of gel coats require higher and curing conditions.High-quality requirements are precision mold surface of mold gel coat operations and mixing

process.Therefore, the performance of tooling gel coat materials, environmental control equipment,technology level, the key to determining the mold.

Gel coat mold construction technology and equipmentCoated with spray equipment, mold tooling gel coat is an important part in the production

process. Can use two types of spray equipment, one is typically used for product gel coatspray equipment, and the other for the air atomization pressure watering can. Two types of equipment can produce high quality gel coat surface. However, in operation, you must takeinto account the following:

For a typical gel coat spray equipment, curing agent mix by way of internal or externalmixing into the raw materials. The gun is very easy to use and often more than sprinkling of



efficiency. Note, however, that if the ratio of curing agent and the deviation of thedistribution, transmission system problems or a mixture of distribution sector is not good, itmay cause defects in gel coat.Many mold makers choose to use an air spray watering can to eliminate the production

process deviations. In the sprinkling gun, the curing agent mix by hand to ensure an accurateratio. In addition, the sector distribution of the mixture to produce a very fine atomization

effect, but the speed of spraying slower than the pumping systems, cementitious materials of their work time by time constraints.

a, MixedBefore using a pneumatic mixer with complete mixing in each barrel mold gel coat, and to

ensure that all materials have been bucket full of mix. Can not be mixed with manual mode,do not die because of fear of air mixed with gel coat, which will reduce the full extent of mixing, to ensure that the barrel and the barrel bottom edge of the gel coat can also becompletely mixed. Then before use to allow gel coat for a few minutes to return to its ownviscosity and foaming.

b, temperatureTo verify whether the temperature of gel coats 23-28 ° C range, if not within the scope of

measures should be taken.c, curing agent in different types of materials, different processes in performance testing and

selection.d, gel time

The next step in gel coat quality inspection is to verify gel time, this will prove whether thegel coat mold within the limits prescribed. Gel time is a simple verification process and doesnot require any equipment.1. Test samples should meet the standard test temperature of 25 ° C;2. Adding a specified quantity of curing dose and mix well;3. Recorded from the curing agent added to the gel time.

pearl mannequin

Documents