Multi-Purpose Polish � Suggested Uses! Antiques & Jewellery... Peek® removes years of rust, residue and oxidation from gold,silver, pewter, platinum, brass, bronze, sterling and silver plate. Restores all metals to theiroriginal lustre. Remove water spots and stains from crystal and glass. Automotive, Trucks & Cycles.. Peek® removes heat discolouration, rust, oxidization,watermarks and tarnish from chrome wheels, aluminium petrol tanks, mag wheels,fibreglass, glass, and Perspex. Also restores surfaces discoloured by tyre cleaning productsand fuel. For show quality brilliance, apply Peek®. Aviation... Excellent on cleaning leading edges, nose cones, painted surfaces, Perspexwindows and helicopter bubbles, plastics, stainless steel and aluminium. Peek® protectsagainst the elements. Bathroom... Peek® removes years of residue from glass shower doors, mirrors, fibreglassshower stalls, sinks, and more. Restore chrome faucets, aluminium trim, brass sinks andaccessories. Hotel, Restaurant & Janitorial... Peek® restores stainless steel sinks, copper countertops,brass elevator surrounds and bathroom fixtures. Polish brass railings, beer taps, and wallfixtures. Buff cloudiness from Perspex food guards; remove water stains from metals andglass. Shine cutlery, flat ware and silver chafing dishes. Kitchen... Peek® cleans and leaves a highly polished finish on stainless steel sinks, copperbar tops, brass rails, bronze flatware, silverware, and aluminium cookware. Removes stains,tarnish and oxidation from all metals, silver, cutlery and serving pieces. Cleans �baked in�marks from ceramic hobs. Marine... Peek® removes tough stains from fibreglass, Perspex and glass. Eliminatestarnish, rust and oxidation from corroded aluminium, brass and stainless steel stanchionsand fittings, bow rails, portholes and winches. After cleaning, Peek® leaves a toughweather-shield to protect against saltwater corrosion. Sports Equipment... Peek® adds new life to trophies, golf clubs, bicycles, knives as well forcleaning and polishing firearms. Peek® is safe to use on factory gun bluing to removepowder residue. Tips: 1. Apply Peek® sparingly. Do not let dry. Rub briskly on surface to be cleaned, using a dryor damp cloth. For large areas use a damp cloth. 2. On large surface areas, Peek® may also be applied using a low-speed buffer (under1000RPM). 3. On intricate surfaces, Peek® may be applied using an old toothbrush wrapped in a dry orwet polishing cloth. 4.On minor rust or stubborn deposits, Peek® may be applied with a nylon scouring pad or#0000 bronze wool. Caution: If in doubt, always test Peek® on an inconspicuous area of the item that is to becleaned, polished, and protected. Not suitable for anodised aluminium or lacqueredsurfaces. Peek® is NSF approved for safe use in and around food service areas.