petroleum measurement equipment and accessoriesmillerweber.com.s3.amazonaws.com/accessories.pdf ·...

PETROLEUM MEASUREMENT EQUIPMENT AND ACCESSORIES

From:

MILLER & WEBER, INC. 1637 George Street

Ridgewood, NY 11385-5342

Telephone: (718) 821-7110 Fax: (718) 821-1673

Email: [email protected]

TABLE OF CONTENTS PAGE #Precision Liquid-in-Glass Thermometers 1 Portable Electronic Thermometers (PETS) 2 Tanking Thermometers 3 Liquid-In-Glass Thermometer Cases 3 Dial/Digital Pocket Thermometers 3 API Hydrometers 4 ASTM Precision Thermometers 5 API Thermohydrometers (Combined Form) 5 Hydrometer Cases 6 Hydrometer Cylinders 6 Calibration Standards & Chemical Standards 6 Complete Oil Gauging Tapes (Without Bob) 7 Gauging Tape Refills 8 Plumb Bobs and Gaugeline Parts 9 Gauge Tape Verification Services 9 Verified Centrifuge Tubes and Accessories 10-11 Oil Thieves and Accessories 12 Samplers and Trays 13 Gauging Pastes 13 Cotton Cord 13 Temperature Re-Calibration & Verification 14 Hydrometer Re-Calibration & Verification 15 Oil Gauge Tape Re-Verification 15

MILLER & WEBER, INC. 1637 George Street. Ridgewood, NY 11385 Telephone: (718) 821-7110 Fax: (718) 821-1673 email: [email protected]

Equivalent Ranges in °Celsius are available.

Please contact us if you require °C thermometers or if you require other ranges or calibrated temperatures.

Model # Description NIST TRACEABLE

ISO/IEC 17025 ACCREDITED DOCUMENTATION

T-3426/FP40Y 18” 30/124 °F, 0.2° Divisions, 76 mm Immersion

T-7426/FP40YSC1 Thermometer T-3426/FP40Y in black leatherette plush lined case

With Report of Calibration at: 32, 60 & 100 °F


With Report of Calibration at 32, 70 & 120 °F

T-3426SBT/124FPY 24” 30/124 °F, 0.1° Divisions, 76 mm Immersion

T-7426SBT/124FPYSC1 Thermometer T-3426SBT/124FPY in black leatherette plush lined case

With Report of Calibration at: 32, 60 & 100 °F

T-7426SBT/124FPYSC2 Thermometer T-3426SBT/124FPY in black leatherette plush lined case


T-3426/FP45Y 24” 30/214 °F, 0.2° Divisions, 76 mm Immersion


With Report of Calibration at: 32, 110, 195 & 212 °F



For Verification Report only, replace the “SC1” and “SC2” with “SV1” and SV2”

PRECISION LIQUID-IN-GLASS THERMOMETERS

1


ThermoProbe® Digital Gauging Thermometers Meet the requirements of API Chapter 7, Section 3

All ThermoProbe® models shown on this page are intrinsically safe, Class 1, Div 1, Groups CD approved by Underwriters Laboratories

Description Model # 50 ft.

Model # 75 ft.

Model # 110 ft

Thermoprobe TP-2C Petroleum Gauging Thermometer

-40 to 400 °F (-40 to 204 °C) ETP-2C-50 ETP-2C-75 ETP-2C-110

Thermoprobe TP-5C Petroleum Gauging Thermometer

-40 to 400 °F (-40 to 204 °C) ETP-5C-50 ETP-5C-75 ETP-5C-110

Thermoprobe TP-7 Petroleum Gauging Thermometer

14 to 370 °F (-10 to 188 °C) ETP-7-50 ETP-7-75 ETP-7-110

Thermoprobe TP-8 Petroleum Gauging Thermometer

14 to 370 °F (-10 to 188 °C) ETP-8-50 ETP-8-75 ETP-8-110

Description Model # 8”

Model # 12”

Model # 16”

Thermoprobe TL-1A Laboratory Thermometer

14 to 320 °F (-10 to 160 °C) ETL-1A-8 ETL-1A-12 ETL-1A-16

Thermoprobe TL-1W Field Thermometer

14 to 320 °F (-10 to 160 °C)

ETL-1W-8 ETL-1W-12 ETL-1W-16

Thermometers as shown above are supplied with a factory certificate.

For a NIST Traceable, ISO 17025 accredited Calibration Report at 32, 100, 195 & 212 °F add SC1 to the end of the Model #

For a NIST Traceable, ISO 17025 accredited Verification Report at

32, 100, 195 & 212 °F add SV1 to the end of the Model #

We can supply other brands and models of digital gauging thermometers and hand held digital thermometers. Please inquire.

PORTABLE ELECTRONIC THERMOMETERS (PETS)

REPAIRS – PARTS – SERVICE

We will repair your ThermoProbe® Digital Gauging Thermometers.

If you have other brand thermometers, we will have them repaired. Please call us with the make and model number and we will arrange for the repairs.

2


TANKING THERMOMETERS MANUFACTURED TO ASTM E1 SPECIFICATIONS

All thermometers are Yellow Lens with Button top, mercury filled. Model # ASTM # Description

T-3750/58FYLBT 58F 12” -30/120 °F, 1° Div, Total Immersion T-7750WC/58FYLBT 58F ASTM 58F complete in Woodback Cupcase

T-3750/59FYLBT 59F 12” 0/180 °F, 1° Div, Total Immersion T-7750WC/59FYLBT 59F ASTM 59F complete in Woodback Cupcase

T-3750/130FYLB 130F 12” 0/220 °F, 1° Div, Total Immersion T-7750WC/130FYLB 130F ASTM 130F complete in Woodback Cupcase

Thermometers with Verification Reports or Reports of Calibration available upon request.

Thermometers in °Celsius also available.

Model # Description Model # Description

R405B476 18” Aluminum carrying case, felt lined with screw cap. T-4955/A18 18” nickel plated brass

open faced armor

R405B477 24” Aluminum carrying case, felt lined with screw cap.

T-4950/A24 24” nickel plated brass

open faced armor.

Model # Description T-3795/C18 Black Leatherette Plush Lined Case for 18” Thermometer T-3795/C24 Black Leatherette Plush Lined Case for 24” Thermometer

R405A015 Woodback cupcase (bulk without thermometer)

TANKING THERMOMETERS

LIQUID-IN-GLASS THERMOMETER CASES

DIAL/DIGITAL POCKET THERMOMETERS

Various pocket digital and bi-metal thermometers available.

Please call us with your requirements and we will be happy to quote.

3


PLAIN FORM ASTM HYDROMETERS Overall Length 335 mm and standardized for 60 °F. Made in accordance with ASTM E100

Description Model # ASTM

# Range Div.

NIST TRACEABLE ISO/IEC 17025 ACCREDITED

DOCUMENTATION

H-8075/1H 1H -1° to 11° API 0.1° H-8075/1HSV1 1H -1° to 11° API 0.1° Verified at 0°, 5° & 10° API H-8075/1HSC1 1H -1° to 11° API 0.1° Certified at 0°, 5° & 10° API

H-8075/2H 2H 9° to 21° API 0.1° H-8075/2HSV1 2H 9° to 21° API 0.1° Verified at 10°, 15° & 20° API H-8075/2HSC1 2H 9° to 21° API 0.1° Certified at 10°, 15° & 20° API








H-8075/10H 10H 89° to 101° API 0.1° H-8075/10HSV1 10H 89° to 101° API 0.1° Verified at 90° & 92° API H-8075/10HSC1 10H 89° to 101° API 0.1° Certified at 90° & 92° API

Other plain form hydrometers are available upon request. Other verified or certified densities also available upon request.

For suggested thermometers for cylinders, see listings on the following pages.

API HYDROMETERS

4


Model # ASTM # ASTM Standard Description

T-3750/63C 63C E1 15” -8 to 32 °C, 0.1°, Total Immersion 7-8 mm OD Mercury Filled.

T-7750/63CFC 63C E1 Thermometer ASTM 63C above with ISO 17025 Accredited

Report of Calibration at -7, 0, 10, 20 & 30 °C. In black leatherette plush lined case.

T-3750/63F 63F E1 15” 18 to 89 °F, 0.2°, Total Immersion, 7-8 mm OD, Mercury Filled.

T-7750/63FFC 63F E1 Thermometer ASTM 63F above with ISO 17025 Accredited

Report of Calibration at 20, 32, 50, 70 & 88 °F. In black leatherette plush lined case.

The entire set of ASTM Precision thermometers is available. Please call Miller & Weber, Inc. for details.

ASTM THERMOHYDROMETERS Overall Length 385 mm and standardized for 60 °F. Made in accordance with ASTM E100

Thermometers are mercury filled with range 0 & 150°F. Description

Model # ASTM # Range Div.

NIST TRACEABLE ISO/IEC 17025 ACCREDITED

DOCUMENTATION H-8175/51HL 51HL -1° to 11° API 0.1°

H-8175/52HL 52HL 9° to 21° API 0.1°

H-8175/53HL 53HL 19° to 31° API 0.1°

H-8175/54HL 54HL 29° to 41° API 0.1°

H-8175/55HL 55HL 39° to 51° API 0.1°

H-8175/56HL 56HL 49° to 61° API 0.1°

H-8175/57HL 57HL 59° to 71° API 0.1°

H-8175/58HL 58HL 69° to 81° API 0.1°

H-8175/59HL 59HL 79° to 91° API 0.1°

H-8175/60HL 60HL 89° to 101° API 0.1°

Verified at 3 points on API scale add SV1 to Model Number

Certified at 3 points on API scale

add SC1 to Model Number

Verified at 3 points on API scale and one point (60 °F) on

thermometer scale- add SV2 to Model Number

Certified at 3 points on API scale

and one point (60 °F) on thermometer scale

add SC2 to Model Number

Certified 3 points on API scale and 3 points (32, 70 & 140 °F) on

thermometer scale add SC3 to Model Number

Other combined form hydrometers (thermohydrometers) are available upon request. Other verified or certified densities and temperatures also available upon request.

Cylinders and cases are found on the next page.

API THERMOHYDROMETERS (COMBINED FORM)

ASTM PRECISION THERMOMETERS

5


Model # Description EF1050375 2” x 15” Glass Hydrometer Cylinder EF1038375 1 3/8” x 15” Glass Hydrometer Cylinder

Other sizes and materials are available. Please call Miller & Weber, Inc. for pricing and delivery.

Miller & Weber, Inc. will arrange for shipment of calibration standards (i.e. Reagent Grade Toluene) or

chemical standards (i.e. 2,2, dimethyl butane) to your location. The shipping point will depend on where in the country you are located.

When requesting these standards, please state what chemical you require, amount, packaging and

grade. We will return with a quotation and availability within one working day.

Proper Material Safety Data Sheets will be supplied with each chemical.

Please be aware that the commercial shipping of some chemicals into your state may be prohibited by your State law.

Model # Description

403B088

Three Place Hydrometer Case with Flip Top.

For carrying three 15” hydrometers. It is made of plastic with separate compartments, each

compartment lined with felt. The lid has a 30° angle cur, which allows it to arc away from the

hydrometers when open, thus preventing stem breakage. With spring loaded hinge that holds the

lid open or closed under spring tension. Dimensions: 16 ½” x 4 ¾” x 2”

403B089

Same as 403B088, but equipped with a standard hinge and a positive tension-type latch which holds

the lid closed until released. Dimensions 16 ½” x 4 ¾” x 2”

403B092

Three Place Aluminum Hydrometer Case (Suit Case Style)

For carrying three 15” hydrometers. Dimensions 15 ¾” x 4 5/8” x 1 3/8” Weight 1 ½ lbs

HYDROMETER CASES

HYDROMETER CYLINDERS

CALIBRATION STANDARDS & CHEMICAL STANDARDS

6


Gauging Tapes Model # Description

E1290SF590 Tape, Oil Gauging Nubian ½” x 25’ E1293SF590 Tape, Oil Gauging Nubian ½” x 50’ E1293SM590 Tape, 15M Oil Gauge Nubian

E9150L Reel, Survey/Eng, Tapes ½” x 50’ EC129012SF Tape, F90 Chr Gauge EC1290SF590 Tape, Oil Gauging Chrome ½” x 25’ EC1291SF590 Tape, Oil Gauging Chrome ½” x 33’ EC1293SF590 Tape, Oil Gauging Chrome ½” x 50’

EC2276D Tape, Surv, Eng, Derrick ¼” x 100’ EC2276ME Tape, Surv, Derrick ¼”/6 x 100’/30

EC2910MME590 Tape, 33’/10M Oil Gauge, Chrome Clad EC2915MME590 Tape, 15M/50’ Oil Gauge Chrome

EC2920MME150M Tape, 20M/66’ Oil Gauge Chrome EC2920MME590 Tape, 20M/66’ Oil Gauge Chrome EC2930MME590 Tape, 13MM x 30M Oil Gauge Chrome ECD2730DMM Tape, 30M Derrick Chrome Clad Engr ECD2750MME Tape, 50M/164’ Derrick Chrome

ECN129012SF5 Tape, F590, Dbl Duty, Oil ECN1290SF590 Tape, Oil Gauging Chr/Nub ½” x 25’ ECN1290SME Tape, F590, ½” x 25’, Oil Gauging

ECN1291SF590 Tape, Oil Gauging Chr/Nub ½” x 33’ ECN1293SDF590 Tape, Engr Gauging Chr/Nub ½” x 50’ ECN1293SF5871 Tape, Gauging Chr/Nub Out ½” x 50’ ECN1293SF590 Tape, Oil Gauging Chr/Nub ½” x 50’

ECN1293SMEF59 Tape, Oil Gauging c/n ½”/13 x 50’/15 ECN1294SF5871 Tape, F587 1/2”, Dbl Duty ECN1294SF590 Tape, Oil Gauging Chr/Nub ½” x 66’

ECN1294SMEF59 Tape, Oil Gauging C/N ½”/13mm x 66’/20m ECN1295SF590 Tape, Oil Gauging Chr/Nub ½” x 75’ ECN1295SME Tape, F/587 ½ ½” x 75’ SME

ECN1295SME590 Tape, Oil Gauging 75/23M Chr Nubian-590 Bob ECN1296SF590 Tape, Oil Gauging Chr/Nub ½” x 100’

ECN1296SMEF59 Tape, Oil Gauging C/N ½”/13mm x 100’/30m ECN1298SME590 Tape, ½” x 125’/38m Oil Gauge Chr/Nub

ES1291F590 Tape, Oil Gauging Stainless ½” x 33’ ES1293F590 Tape, Oil Gauging Stainless ½” x 50’

COMPLETE OIL GAUGING TAPES (WITHOUT BOB)

The listings to the right are for gauge tapes with handles-

complete, but without plumb

bobs.

For complete assemblies, add

the plumb bob from pages that follow.

Refill tapes available on next

page

If you want your assembly verified, please add a V to the Model Number

Please call us if you have any

questions.

7


Gauging Tape Refills

Model # Description EO1290SF590 Tape, Repl. Blade Oil Gag. ½” x 25’ EO1293SF590 Tape, Repl. Blade Oil Gag. ½” x 50’

EOC129012SF59 Refill, F590 Atlas Cr EOC1290SF590 Tape, Chrm Rep Bld Oil Gauge ½’ x 25’ EOC1291SF590 Tape, Repl. Blade Oil Gag. ½” x 33’ EOC1293SF590 Tape, Chrm Rep Bld Oil, Gag. ½” x 50’

EOC2276D Tape, Repl Blade Derrick ¼” x 100’ EOC2276ME Tape, Repl. Blade Derrick 100’/30M

EOC2910MME590 Refill, Tape 10M/33’ Oil Gauge Chrome EOCD2730DMM Refill, 590, Double Duty EOCN1290SF590 Refill, Double Duty Oil EOCN1291SF590 Tape, Repl Blade Oil Gag. ½” x 33’ EOCN1293SF590 Tape, Repl Blade Oil Gag. ½” x 50’ EOCN1293SMEF5 Tape, Repl. Blade Oil Gag. 50’/15M EOCN1294SF590 Tape, Repl. Blade Oil Gag. ½” x 66’ EOCN1294SMEF5 Tape, Repl. Blade Oil Gag. 66’/20M EOCN1295SF590 Tape, Repl Blade Oil Gag. ½” x 75’ EOCN1295SME59 Tape, Refill Oil Gaug 75/23M Chr Nub-590 EOCN1296SF590 Tape, Repl Blade Oil Gag ½” x 100’ EOCN1296SMEF5 Refill Gauging Tape ½”/13 x 100’/30

EOS1291F590 Tape Refill Oil Gauging 33’ EOS1293F590 Tape, Repl Bld Stainless ½” x 50’ ES1291F590 Tape, Oil Gaug. Stainless ½” x 33’ ES1293F590 Tape, Oil Gaug. Stainless ½” x 50’

GAUGING TAPE REFILLS

8


PLUMB BOBS Model # Description

E150MM Plumb Bob, Brass Outage, 540 grams

E58712 Plumb Bob, Brass Outage, 15 oz

E590 Plumb Bob, Brass Inage 20 oz

E590G Plumb Bob, Gra 20 oz Brass Inage

E590GM Plumb Bob, Brass mm/cm 20 oz

E590GME Plumb Bob, Metric, English

ES590 Plumb Bob Stainless Inage 20 oz

E591E

18” water bob- heavy walled brass (not pictured)

** requires a special cut tape. Cutting charges apply**

Other plumb bobs, thermobobs and specials available Call Miller & Weber, inc. for prices and availability

GAUGELINE PARTS

Model # Description E91-76 Handle with Ground Strap

E91-25 2 arm reel, complete frame assembly for mounting gauging tapes from 18’ through 33’

E91-50 2 arm reel, complete frame assembly for mounting gauging tapes from 50’ through 75’

E601-B Little Joe Wiper (bulk packaged) Please state quantity you require when ordering.

E603 Little Joe Wiper Replacement rollers

Gauge Tape Verification from Ed Martin & Associates

Gauge tape with attached Bob verified meeting API Standard Specification, Chapter 3, Section 1A and verified in accordance with Appendix A of that

document.

Model # Description

ET-VERIFY Verify tape on one side

Et-VERIFY2 Verify tape on two sides (metric & English)

EQ-VERIFY Verify Quick Sticks

PLUMB BOBS AND GAUGELINE PARTS

GAUGE TAPE VERIFICATION SERVICES

9


Model # Description

LS10C 100 ml long Cone Tube, Marked in milliliters

LS10CFV15 Model S10C Factory Verified at 15 points

LS10CAV15 Model S10C Actual Value Certificate at 15 points

LS10C2 100 ml long Cone Tube, Marked in 200 parts

LS10C2FV15 Model S10C2 Factory Verified at 15 points

LS10C2AV15 Model S10C2 Actual Value Certificate at 15 points

LS12C 100 ml long Cone Tube, Marked in milliliters every 1 ml above 10 ml

LS12CFV15 Model S12C Factory Verified at 15 points

LS12CAV15 Model S12C Actual Value Certificate at 15 points

LS12C2 100 ml long Cone Tube, Marked in 200 parts every 2 parts above 20 parts

LS12C2FV15 Model S12C2 Factory Verified at 15 points

LS12C2AV15 Model S12C2 Actual Value Certificate at 15 points

VERIFIED CENTRIFUGE TUBES AND ACCESSORIES

L-K “C” LONG CONE TUBES AND “D” SHORT CONE TUBES

• Fabrication in strict compliance to API 10.4 and ASTM D96-98, D1796 and D2158 standards • Graduation marks permanently etched and filled with hi-light for improved legibility • Sand spot for marking tubes in the field and lab. • Unique serial number on each tube for traceability. • Factory Verified tubes available with certificate of tolerances. • Actual Value tubes (Certified by third party) available with certificate. • Packaged and sold in quantities of 6 tubes. • For “C” Tubes approximate shipping weight per box of 6 is 2 lbs. Shipping size: 10” x 10” x 8”. • For “D” Tubes approximate shipping weight per box of 6 is 2 lbs. Shipping size is 7” x 6” x 4” • Also available in threaded neck with polyseal caps, at additional cost. Call Miller & Weber, Inc. for

price and availablility

10


Model # Description

LS10D 100 ml Short Cone Tube, Marked in milliliters

LS10DFV15 Model S10D Factory Verified at 15 points

LS10DAV15 Model S10D Actual Value Certificate at 15 points

LS10D2 100 ml Short Cone Tube, Marked in 200 parts

LS10D2FV15 Model S10D2 Factory Verified at 15 points

LS10D2AV15 Model S10D2 Actual Value Certificate at 15 points

LS12D 100 ml Short Cone Tube, Marked in milliliters every 2 ml above 10 ml

LS12DFV15 Model S12D Factory Verified at 15 points

LS12DAV15 Model S12D Actual Value Certificate at 15 points

LS12D2 100 ml Short Cone Tube, Marked in 200 parts every 4 parts above 20 parts

LS12D2FV15 Model S12D2 Factory Verified at 15 points

LS12D2AV15 Model S12D2 Actual Value Certificate at 15 points

CENTRIFUGE TUBE ACCESSORIES

Model # Description

LS10C-RACK Tube Holders for Style “C” long cone tubes

LS10D-RACK Tube Holders for Style “D” short cone tubes

LS10-BRUSH Cleaning Brush (package of 6)

LJ-056D Rubber Stoppers (package of 12)

LJ-055D Cork Stoppers (package of 12)

Other accessories and screw caps are available upon request. Please contact Miller & Weber, Inc for price & availability

If you need a new centrifuge we can help! Call us!

11


THIEVES- SLIDE VALVE TYPE The Robinson slide valve designed thief is made in three models, clear barrel, brass barrel and aluminum barrel. All three models offer the following features: Single trip action, full opening with slide valve closure, two adjustable springs, hanger on the top casting for hanging the thief on the tank hatch, adjustable graduated trip rod and hexagon shaped closure spring adjuster head for easier spring adjustment. All thiefs can be graduated in 10ths and 100ths of a foot on special request.

Model # Barrel Type and Size

Capacity ml / oz

Weight lbs

R110D007 16” Tall, Clear Barrel 976/33 5 ½

R110D019 16” Tall, Brass Barrel 1065/36 7

Other Sizes and aluminum barrels available upon request. Please call Miller & Weber, Inc. for quotation.

THIEF REPLACEMENT PARTS AND

ACCESSORIES

Model # Description

R110A084 Thumb Screw R110A107 Drain Cock, Angle ¼” NPT R110A126 “O” Ring Seal R110A180 Top Casting, Clear Barrel R110A181 Top Casting, Metal Barrel R110A183 Closure Tube 16” R110A200 Closure Spring Adjuster Head R110A174 Closure Spring R110A187 Barrel, 16” Clear R110A201 Base Casting, Clear Barrel R110A202 Base Casting, Metal Barrel, Slide Valve R110A205 Closure Arm R110A206 Valve, Slide Valve Thief R110A210 Tie Rod, 16” R110B007 Bail Assembly, Metal Barrel R110B014 Bail Assembly, Clear Barrel R110B013 Drain Valve, Extended R110B022 Trip Rod Assembly, 16” R110B027 Lock Pin Yoke Assembly

All replacement parts for Tulsa Oil Thief ® available- except for 70718 (top casting) and 70702 (bottom casting).

Order by Walker part number.

OIL THIEF ROPE Unmarked, made of ¼” 100% cotton sash cord.

Model # Length R110B016-25 25 feet R110B016-50 50 feet R110B016-75 75 feet

OIL THIEVES AND ACCESSORIES

12


GLASS BOTTLE SAMPLER

Brass or stainless steel construction to hold one quart glass Boston round bottle or a 16 ounce glass bottle. ASTM designation D4057-88

Other size Samplers and glass bottles available! Call Miller & Weber, Inc. for prices.

Model # Description

R110B032 32 ounces, brass constructed, brass weighted. Dimensions: 4 ½” x 12 ¾”, 15 ½” with eyebolt extended. Weight 47 oz.

R110B033 32 ounces, stainless steel constructed, stainless steel

weighted. Dimensions: 4 ½” x 12 ¾”, 15 ½” with eyebolt extended. Weight 45 oz.

GAUGERS TRAY

Aluminum construction, with internal dividers to keep the different pieces of equipment from damaging each other. Two

swing out handles for better balance and accessibility to the equipment. Tube holders are available as a part of the tray.

Dimensions: 21 ½” x 8 ½” x 3 ½” Model # Description

R300D016 Tray only R300D018 Tray with 100 ml SC tube holder

Model # Description E200 Kolor Kut Water Indicating Paste E250 Kolor Kut Modified for Methanol & Ethanol E400 Kolor Kut Gas Indicating Paste

Also available McCabe and Masterline Pastes. Call Miller & Weber for pricing & availability

Model # Description

ESC-ROPE-75 75’ Braided Cotton Rope Marked every 2’

ESC-ROPE-75NM 75’ Braided Cotton Rope- No Marking

Other lengths and sealing wire dispensing packs available Call Miller & Weber for pricing & availability

SAMPLERS AND TRAYS

GAUGING PASTES

COTTON CORD

13


RE-CALIBRATION OF ANY TEMPERATURE MEASUREMENT DEVICE

• Re-calibration includes inspection of temperature measurement device for defects

and re-certification of the temperatures listed below.

• Liquid-in-glass thermometers with chipped buttons will be repaired in our glassblowing department at no additional charge. Etched stem thermometers will be re-pigmented as needed.

• Batteries will be replaced, as necessary, on PETS. Cost of batteries will be invoiced.

T-CERT/SH-1 Standard Re-calibration of thermometer at 32, 60 & 100 °F


T-CERT/SH-3 Standard Re-calibration of thermometer at 32, 110, 195 & 212 °F


T-CERT/Custom User specified, any temperature between 32 & 212 °F Equivalent re-calibrations in °Celsius are available.

Please contact us if you have °C thermometers or

if you require other calibrated yemperatures.

RE-VERIFICATION OF ANY TEMPERATURE MEASUREMENT DEVICE

Re-verification includes the services above.

T-VERI/SH-1 Standard Re-verification of thermometer at 32, 60 & 100 °F

T-VERI/SH-2 Standard Re- verification of thermometer at 32, 70 & 120 °F

T-VERI/SH-3 Standard Re- verification of thermometer at 32, 110, 195 & 212 °F

T-VERI/SH-4 Standard Re- verification of thermometer at 32, 120 & 212 °F

T-VERI/Custom User specified verification , any temperature between 32 & 212 °F Equivalent re-verifications in °Celsius are available.

Please contact us if you have °C thermometers or

if you require other verified temperatures.

TEMPERATURE RE-CALIBRATION & VERIFICATION

MILLER & WEBER, INC.’s Calibration Laboratory is accredited

to ISO/IEC 17025:2005 and ANSI/NCLS Z-540-1-1994 for temperature and density measurement calibration.

Both our manufacturing facility and laboratory are also

ISO9001:2000 certified.

14

Certificate # AC-1209


RE-CALIBRATION OF HYDROMETERS, THERMOHYDROMETERS OR DIGITAL DENSITOMETERS

H-CERT/SH-5 Re-certification of hydrometer or digital densitometer at 3 points

H-CERT/SH-6 Re-certification of thermohydrometer at 3 points on API scale and one point (60°F) on thermometer scale.

H-CERT/SH-7 Re-certification of thermohydrometer at 3 points on API scale and 3 points (32, 70 & 140 °F) on thermometer scale.

Other certified densities and temperatures also available upon request.

RE-VERIFICATION OF HYDROMETERS, THERMOHYDROMETERS OR

DIGITAL DENSITOMETERS H-VERI/SH-5 Re-verification of hydrometer or digital densitometer at 3 points

H-VERI/SH-6 Re-verifification of thermohydrometer at 3 points on API scale and one point (60°F) on thermometer scale.

H-VERI/SH-7 Re-verification of thermohydrometer at 3 points on API scale and 3 points (32, 70 & 140 °F) on thermometer scale.

Other certified densities and temperatures also available upon request.

Gauge Tape Verification from Ed Martin & Associates

Gauge tape with attached Bob verified meeting API Standard Specification, Chapter 3, Section 1A and verified in accordance with Appendix A of that document.

An additional charge will apply for verification of replacement tapes due to the necessity of

removing the old tape and re-assembling. Model # Description

ET-VERIFY Verify tape on one side

ET-VERIFY2 Verify tape on two sides (metric & English)

EQ-VERIFY Verify Quick Sticks

HYDROMETER RE-CALIBRATION & VERIFICATION

OIL GAUGE TAPE RE-VERIFICATION

15

petroleum measurement equipment and accessoriesmillerweber.com.s3.amazonaws.com/accessories.pdf ·...

Documents