pgs introduction "value series" : best value gaming cases with the highest c/p ratio (cost...
TRANSCRIPT
PG
S In
trod
uctio
n
"Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio).
"Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs.
"Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers.
"Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling.
"Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX).
Yellow
Desig
n C
on
cept
Vs-9Vs-9 is a Superb Gaming case which is affordable by everyone. This case is one
of the BEST VALUE case in the market today if not the BEST VALUE case.
The Chassis is solidly constructed with 0.6mm Japanese steel. It is also
beautifully finished with "All Black" interior and it includes many advanced
features even for the most demanding gamers and enthusiasts. It has great
expandability and versatility. The chassis supports 9 x 5 1/4" devices or 4 x 5 1/4"
devices and 5 x 3.5" HDDs with the use of HDD adaptors. A SSD Drive can be
installed on the bottom of the chassis. Vs-9 also supports long high end VGA
cards up to 295mm.
Vs-9 also provides un-rival air flow and cooling. Users can install up to max 7
fans - 3 x 12cm intake front fans (optional) with the use of fan brackets, 2 x 12cm
or 14cm side panel fans (optional), 1 x 12cm Back Exhaust fan (included) and 1 x
12cm or 14cm intake bottom fan (optional). Vent holes are pre-drilled on the top
chassis panel for the hot air to exist easily.Each HDD can be individually cooled
by mounting a 12cm fan on the HDD convertor bracket. Bottom PSU position will
suck in cold air and help cool your system.
Ease of installation is also one of Vs-9's advance features. The chassis is
completely screw-less and cable management clips are pre-mounted on the MB
plate to reduce the cable mess inside your chassis. A CPU hole is pre-drilled on
the MB plate for easy mounting or assembly of your CPU cooler.
The side panel design is compatible with Intel's TAC 2.0 standards. The unique
vent hole design and position allow users to mount 1 x 12cm or 14cm fan in any
position or it can support maximum 2 x 12cm or 14cm fans on the side panel.
Water-cooling holes are pre-drilled to support water cooling systems.
The Vs-9 is the best Gaming case your money can buy !!
Featu
res
- High performance "Mid-Tower" for gamers and enthusiast.
- Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese
Steel and beautifully finished ALL BLACK interior.
- High-end Graphic card Support – Supports longer high-end VGA cards up to 295
mm.
- High Expandability – Supports 9 x 5 1/4" bays and maximum 5 x 3.5" HDDs
(internal) with HDD convertor brackets.
- Superb HDD Cooling capability – Each HDD bracket has pre-drilled fan holes to
mount a 12cm fan to cool each HDD individually.
- Ease of Installation – New "Easy-install" screw-less kits are included for the 5
1/4" devices and PCI slot.
- Easy Access Front I/O ports – 2 x USBs and Audio/Mic ports are easily
accessible from the front panel.
- Smart Cable Management – Cable routing clips are pre-mounted on the MB so
users can arrange the cables inside the chassis neatly
- CPU holes is pre-drilled on the MB plate for ease of CPU cooler assembly
Superb Cooling – Users can install up to 7 fans - 3 x 12cm front intake fans
(optional), 2 x 12cm/14cm intake side panel fans (optional), 1 x 12cm back exhaust
fan (included) and 1 x 12cm intake bottom fan (optional).
- Un-rival Airflow – The front "Mesh" front bay cover design allows max intake of
cold air. The top chassis vent holes enable the hot air inside the chassis to exist
easily. Users also have the option to install up to 2 x 12cm/14cm on the top panel if
there is sufficient space inside the chassis.
- TAC 2.0 compatible Side Panel - Bottom PSU position – the bottom PSU location enables PSUs to suck in cold air and provides better air flow for your system.
- Water-cooling Support – water-cooling holes are pre-drilled to support water-
cooling systems!!
- Supports 1 x SSD Drive
Sp
ecification
s
Spec
Cooling System
Case Type
Material
Motherboards
Chassis Dimensions
Drive Bays
Expansion Slots
Max length space available for PCI slots
I / O Ports
Fan
Rated voltage
Voltage range
Starting voltage
Power consumption
Rated current
Speed
Air Flow (CFM)
Air pressure
Noise (dBA)
Bearing
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Middle Tower
SECC 0.6mm
ATX & Micro ATX
430(H) x 190(W) x 493(D)
9 x 5.25" (External)/1 x 3.5" (w/Adapters)/5 x 3.5” HDD (Hidden) /
1 x 2.5" HDD(Hidden)
7 Slots
295 mm
2 x USB2.0 / Mic & headphone (AC97 & HD audio)
120 x 120 x 25mm
12V
DC6V~13.8V
9V
2.4W
0.20A
1500 RPM +- 10%
58.35 CFM (Max)
2.1mm H2O
26.67 dBA
Sleeve
Back12cm Fan
Air F
low
Superb airflow - install up to 7 fans !!
1. Front - 3 x 12cm fan (optional)-(w/Fan adaptor)2. Back - 1 x 12cm fan (included)3. Side - 2 x 14 or 12cm fan (optional)4. Bottom - 1 x 14 or 12cm fan (optional)
Insid
e
Pre-drilled holes for water cooling tubes
Sufficient depth of chassis for installing long cards
Fan can be installedin any position on top panel
Can install 1x12 or 14cm fan at bottom atany position preferred
Can install up to 2x12 or 2x14cm fanson side panel
Fan can be mountedto the HDD adaptorto cool HDD
FDD can be mounted with adaptor
Large area of vent holes for great air flow
Large area of vent holes for great air flow
HDD can be mounted with adaptor
Tool-free for 5.25” bayCable clip to reduce mess inside the chassis
Can mount 1x12cm fan with fan adaptor