pgti_interactive course catalog
DESCRIPTION
PGTI_Interactive Course Catalog Nov 2012_634883349451642248TRANSCRIPT
Basic fundamentals of video security,
including basics of IP and megapixel
cameras.
Fundamentals
Use the interactive building blocks below to find a specific course or to design your learning plan.
The steps represent a progression of Pelco courses, beginning with fundamentals and culminating in systems certifications. If you are experienced in the industry you may wish to access the Product or Systems courses directly.
Click on any of the blocks for courses in each category.
Instructor-led courses are marked with an asterisk (*). All other courses are e-Learning.
Video security design principles including
elements such as audio, analytics, and cabling options that
enhance video security.
Com
pete
ncy
in D
isci
plin
es
Elements and Design
Fundamentals of network technologies including topologies, TCP/IP configuration,
network protocols, and routing video
transmissions.
Networking Technologies
Product-specific courses for imaging, recording, viewing,
and video management.
Pelco Products Certification for
Pelco’s end-to-end, enterprise class
systems, including Endura, Digital Sentry,
and CM9700.
Pelco Systems
Basic fundamentals of video security,
including basics of IP and megapixel
cameras.
Fundamentals
Use the interactive building blocks below to find a specific course or to design your learning plan.
The steps represent a progression of Pelco courses, beginning with fundamentals and culminating in systems certifications. If you are experienced in the industry you may wish to access the Product or Systems courses directly.
Click on any of the blocks for courses in each category.
Instructor-led courses are marked with an asterisk (*). All other courses are e-Learning.
Video security design principles including
elements such as audio, analytics, and cabling options that
enhance video security.
Com
pete
ncy
in D
isci
plin
es
Elements and Design
Fundamentals of network technologies including topologies, TCP/IP configuration,
network protocols, and routing video
transmissions.
Networking Technologies
Product-specific courses for imaging, recording, viewing,
and video management.
Pelco Products Certification for
Pelco’s end-to-end, enterprise class
systems, including Endura, Digital Sentry,
and CM9700.
Pelco Systems
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Fundamentals
Click on Titles
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Camera Basics
This e-Learning course is a guide to camera fundamentals including camera theory, imaging devices, video basics, and camera resolution. Course ID: 0054 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Lens Basics
This e-Learning course guides the user on lens basics, such as how a lens works, the basic types of iris, f-stop, field of view, lens formats, and camera lens compatibility. Course ID: 0055 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Recording Systems Basics
This e-Learning course will review the types of recording systems, time lapsed video, digital video recorders (DVRs), analog vs. digital, and video compression methods. Course ID: 0056 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Cable Basics
This e-Learning course is a basic guide to video transmission methods such as fiber optics, coax, and UTP. Course ID: 0057 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Monitor Basics
An introduction to monitors, this e-Learning course includes CRT vs. LCD monitors, resolution, settings and controls, termination, and looping. Course ID: 0058 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
System Design Basics
This e-Learning course identifies environmental components such as camera selection, area coverage, light levels, surveillance, and reflection factor. Course ID: 0059 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
Designed for the user that needs a basic video security background, these courses provide a comprehensive overview of video security concepts and terminology.
• Camera Basics
• Lens Basics
• Recording System Basics
• Cable Basics
• Monitor Basics
• System Design Basics
• Glossary of Terms
Basic Track
Click on Titles
Glossary of Terms
This glossary is an alphabetized catalog of terms specific to the video security industry. Course ID: 0060 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Fundamentals
MAIN MENU
This track provides courses covering the design of video security systems and appropriate selection of products, including cameras, recording solutions and monitors as well as the use of special features such as audio, fiber, and analytics.
• Design Elements
• Design Courses
Design Track
Video Security Elements & Design
MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
Video Security Elements & Design
Click on Titles
*Instructor-led course
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Introduction to Video Security Systems
This e-Learning course provides those new to the industry an orientation to video security. The course explains key reasons for deploying video security systems -- protecting people and property, monitoring situations, deterring crime, apprehending criminals, and more. The course describes how different vertical markets, like the retail industry, use video security for unique applications. A high-level discussion of how to gather information for a system design is included, along with answers to some of the critical questions and objections many individuals have about deploying video security systems.
Course ID: 0354 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Pelco LCD Monitors
This e-Learning course explains the features and menu settings for Pelco’s 200, 300, 400, and 500 Series LCD monitors. Course ID: 0102 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Audio Introduction
An introduction to audio basics, this e-Learning course explains the use of audio levels, audio sources, speakers, cabling, audio products, and troubleshooting audio systems. Course ID: 0178 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Pelco Fiber and UTP
This e-Learning course covers the introduction and installation of fiber optics and UTP transmission methods. Also covered in this e-Learning course are switch settings, troubleshooting, and Ethernet media converters and switches. Course ID: 0129 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Megapixel Technology Basics
This e-Learning course reviews megapixel technology, including imagers, lens requirements, the advantages of megapixel, considerations before buying megapixel, and familiarization of Pelco’s Sarix platform cameras. Course ID: 0172 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Elements
These courses cover features that may be incorporated into a video security system such as different types of recorders and monitors and the use of audio, fiber, megapixel cameras, and analytics.
• Introduction to Video Security Systems
• Pelco LCD Monitors
• Audio Introduction
• Pelco Fiber and UTP
• Megapixel Technology Basics
• Pelco DVR Solutions*
Design Track
*Instructor-led course
Click on Titles
Video Security Elements & Design
Pelco DVR Solutions
This 2-day instructor-led course is designed to give individuals a basic working knowledge of Pelco’s entire line of digital video recorders. Key features and selling points of each product will be discussed, along with entry-level digital theory and terminology needed to understand them. Course ID: 0297 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Video Security Elements & Design
Click on Titles
*Instructor-led course
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Click on Titles
*Instructor-led course
Click on Titles
System Design Basics
This e-Learning course identifies environmental components such as camera selection, area coverage, light levels, surveillance, and reflection factor. Course ID: 0059 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Click on Titles
*Instructor-led course
Click on Titles
Product Overview
This 1.5 day instructor-led course introduces the Pelco product line and extensive support service we offer to our customers. As video technologies rapidly evolve, this course makes it easier to track the latest technologies, features, and enhancements developed by Pelco. Note: Product Overview is also offered as an e-Learning course. Course ID: 0355
Course ID: 0296 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Click on Titles
*Instructor-led course
Click on Titles
Video Security Elements & Design
Video Security Design Fundamentals
Today’s video security marketplace offers infinite application and design possibilities. The course topics include the entire design process from site survey and customer communications to system design concepts for both analog and IP systems. Practical exercises are designed to provide real-world knowledge and help students achieve success as integrators. Course ID: 0369 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Click on Titles
*Instructor-led course
Click on Titles
Navigating the World of Video Security Systems
This instructor-led course focuses on the design, application, and installation of a complete CCTV system. Designed for dealers and installers, this course explains the proper installation procedures and design characteristics required to meet today's ever-challenging security applications. Course ID: 0288 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
Design Courses
These courses identify key considerations in designing a video security system. Learn how to perform site assessments, evaluate scenes and lighting for appropriate camera selection, and assess customer needs for storage and recording.
• System Design Basics
• Product Overview*
• Video Security Design Fundamentals*
• Navigating the World of Video Security Systems *
• Navigating and Troubleshooting the World of Video Security Systems *
Design Track
Click on Titles
*Instructor-led course
Click on Titles
Navigating and Troubleshooting the World of Video Security Systems
This two-day instructor-led class covers basic electronic theory, video technical information, and overall CCTV system troubleshooting. This course includes technical lectures, as well as hands-on experience. Basic knowledge of system installation and testing equipment such as V.O.M. and oscilloscope are required. Course ID: 0373 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
DESIGN ELEMENTS DESIGN COURSES MAIN MENU
These courses describe the fundamentals of network technologies including topologies, TCP/IP configuration, network protocols, and routing video transmissions.
• Introduction to Networks
• Network Fundamentals for Video Security I *
• Network Fundamentals for Video Security II *
• Switch Configuration and Operation*
Network Technologies
Video Security Elements & Design
Click on Titles
*Instructor-led course
MAIN MENU
These courses describe the fundamentals of network technologies including topologies, TCP/IP configuration, network protocols, and routing video transmissions.
• Introduction to Networks
• Network Fundamentals for Video Security I *
• Network Fundamentals for Video Security II *
Network Technologies
*Instructor-led course
Click on Titles
Introduction to Networks
This e-Learning course describes the functions of networks, network terminology, and introduces basic concepts related to network video traffic. The course introduces IT industry network standards, IP addressing, routing protocols and bandwidth considerations. This course is a pre-requisite for the instructor-led Network Fundamentals for Video Security II course. Course ID: 0356 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
MAIN MENU
These courses describe the fundamentals of network technologies including topologies, TCP/IP configuration, network protocols, and routing video transmissions.
• Introduction to Networks
• Network Fundamentals for Video Security I *
• Network Fundamentals for Video Security II *
Network Technologies
*Instructor-led course
Click on Titles
Network Fundamentals of Video Security I
This course will explore the foundations of networking. Key topics include network protocols, topologies, and how devices are configured to work on the network. Hands-on labs include: how data flows through the network, basic IP addressing, and tools for troubleshooting. This course is intended for those who are new to networking. Pre-requisite: The following e-Learning courses are recommended prior to taking Network to Fundamentals I – Introduction to Networking.
Course ID: 0371 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Video Security Elements & Design
MAIN MENU
These courses describe the fundamentals of network technologies including topologies, TCP/IP configuration, network protocols, and routing video transmissions.
• Introduction to Networks
• Network Fundamentals for Video Security I *
• Network Fundamentals for Video Security II *
Network Technologies
*Instructor-led course
Click on Titles
Video Security Elements & Design
Network Fundamentals of Video Security II
This course provides detailed instruction of networking topologies as they are applied to video security systems. Course topics include Ethernet signaling standards, advanced IP addressing, and routing of multicast traffic. Hands-on labs include: testing of VLANs (virtual local area networks) in a multi-switch environment, Layer 3 network addressing, IP configuration, and routing unicast and multicast video transmissions. Pre-requisite: It is recommended that students without fundamental IP knowledge take the Introduction to Networks online course at no charge and Network Fundamentals for Video Security I.
Course ID: 0370 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU
These courses describe the fundamentals of network technologies including topologies, TCP/IP configuration, network protocols, and routing video transmissions.
• Introduction to Networks
• Network Fundamentals for Video Security I *
• Network Fundamentals for Video Security II *
Network Technologies
*Instructor-led course
Click on Titles
Video Security Elements & Design
Switch Configuration and Operation
This course provides an intensive hands-on introduction to the configuration and operation of Cisco and Juniper switches. Students will perform command-line configuration of Layer 2 switches and analyze the results of those configurations. Course topics include IOS commands and functions, advanced IP addressing, switch-based network design concepts and standards. Lab topics include: switch configuration and operation, administration of port security, implementing VLANs (virtual local area networks) in a multi-switch environment, trunking, IP configuration, ether-channel, link aggregation, configuring IGMP snooping, and the Spanning Tree protocol.. Pre-requisite: It is recommended that students without fundamental IP knowledge take the Introduction to Networks online course at no charge and both Network Fundamentals for Video Security I and II.
Course ID: 0372 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU
This track is specific to Pelco Products.
• IP Cameras
• PTZ Cameras
• Camclosure
• DX4000 Series DVRs
• DX8100 Series DVR/HVRs
Product Track
Pelco Products
Click on Titles
MAIN MENU
This track is specific to Pelco’s IP cameras.
• Megapixel Technology Basics
• Spectra Positioning Systems
• Sarix IP Cameras
• Sarix IP Megapixel Cameras *
IP Cameras
Pelco Products
Click on Titles
IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES
*Instructor-led course
CAMCLOSURE MAIN MENU
This track is specific to Pelco’s IP cameras.
• Megapixel Technology Basics
• Spectra Positioning Systems
• Sarix IP Cameras
• Sarix IP Megapixel Cameras *
IP Cameras
*Instructor-led course
Click on Titles
Pelco Products
Megapixel Technology Basics
This e-Learning course reviews megapixel technology, including imagers, lens requirements, the advantages of megapixel, considerations before buying megapixel, and familiarization of Pelco’s Sarix platform cameras. Course ID: 0172 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to Pelco’s IP cameras.
• Megapixel Technology Basics
• Spectra Positioning Systems
• Sarix IP Cameras
• Sarix IP Megapixel Cameras *
IP Cameras
*Instructor-led course
Click on Titles
Pelco Products
Spectra Positioning Systems
The Spectra Positioning Systems e-Learning course contains the Spectra HD, Spectra IV, Spectra IV IP, Spectra Mini IP, Spectra Mini, Spectra IV IP Audio, and Spectra EVS courses. Course ID: 0003 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to Pelco’s IP cameras.
• Megapixel Technology Basics
• Spectra Positioning Systems
• Sarix IP Cameras
• Sarix IP Megapixel Cameras *
IP Cameras
*Instructor-led course
Click on Titles
Sarix IP Cameras
This comprehensive e-Learning course details the Sarix IX, IM, ID, and IE Series IP megapixel cameras, including features, installation, camera operation, and the v1.6 update. Course ID: 0005 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to Pelco’s IP cameras.
• Megapixel Technology Basics
• Spectra Positioning Systems
• Sarix IP Cameras
• Sarix IP Megapixel Cameras *
IP Cameras
*Instructor-led course
Click on Titles Click on Titles
Sarix IP Megapixel Cameras
This instructor-led course is designed for the experienced CCTV specifier/installer who supports network-based video security systems. This course includes megapixel technology, basic network protocols, and Internet Protocol (IP) addressing. Hands-on labs include installing and configuring network cameras and basic network analysis tools to determine bandwidth consumption and performance. Course ID: 0286 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Positioning Systems
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
PTZ Cameras
Click on Titles
Pelco Products
IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE MAIN MENU
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Series
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
Pelco Products
PTZ Cameras
Click on Titles
ExSite Product Introduction
This e-Learning course identifies the features and benefits of the ExSite explosion-proof camera positioning system. Course ID: 0176 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Series
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
PTZ Cameras
Pelco Products
Click on Titles
Esprit Installation
This e-Learning course describes the installation procedures for the Esprit Series cameras. Course ID: 0012 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Series
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
PTZ Cameras
Pelco Products
Click on Titles
Spectra Positioning Systems
The Spectra Positioning Systems e-Learning course contains the Spectra HD, Spectra IV IP, Spectra Mini IP, Spectra IV, Spectra Horizon, Spectra Mini, and Spectra EVS courses. Course ID: 0003 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Series
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
PTZ Cameras
Pelco Products
Click on Titles
Ti25 GUI Overview
This e-Learning course is a basic overview of the Ti25 GUI (graphical user interface) tabs. Course ID: 0174 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track provides the user with comprehensive information on Pelco’s PTZ cameras.
• ExSite Product Introduction
• Esprit Installation
• Spectra Series
• Ti25 GUI Overview
• TXB-NTCIP Translator Board
PTZ Cameras
Pelco Products
Click on Titles
TXB-NTCIP Translator Board
This e-Learning course describes the features of the TXB-NTCIP translator board, a device that allows third-party control of Pelco’s Spectra, Esprit, and ExSite positioning systems. Course ID: 0175 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
Featuring a classic design and innovative performance, Camclosure Integrated Camera Systems deliver advanced imaging technology and multiple optics packages.
• Camclosure 2 Integrated Camera System
Camclosure
Pelco Products
Click on Titles
IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE MAIN MENU
Featuring a classic design and innovative performance, Camclosure Integrated Camera Systems deliver advanced imaging technology and multiple optics packages.
• Camclosure 2 Integrated Camera System
Camclosure
Click on Titles
Camclosure 2 Integrated Camera System
This e-Learning course describes the features and benefits, installation practices, operation and configuration, and troubleshooting tips for the IS20/IS21 and IS50/IS51 Series cameras. Course ID: 0278 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX4104 and DX4500/4600 Series digital video recorders:
• Pelco DVR Solutions *
• DX4104 DVR
• DX4500/4600 DVR
• DX4700/4800 Hybrid Video Recorder
DX4000 Series
Pelco Products
Click on Titles
*Instructor-led course
IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE MAIN MENU
This track is specific to the DX4104 and DX4500/4600 Series digital video recorders:
• Pelco DVR Solutions *
• DX4104 DVR
• DX4500/4600 DVR
• DX4700/4800 HVR
DX4000 Series
*Instructor-led course
Pelco DVR Solutions
This 2-day instructor-led course is designed to give individuals a basic working knowledge of Pelco’s entire line of digital video recorders. Key features and selling points of each product will be discussed, along with entry-level digital theory and terminology needed to understand them. Course ID: 0297 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX4104 and DX4500/4600 Series digital video recorders:
• Pelco DVR Solutions *
• DX4104 DVR
• DX4500/4600 DVR
• DX4700/4800 HVR
DX4000 Series
*Instructor-led course
DX4104 DVR
This course is an e-Learning introduction to the DX4104, a 4-channel analog DVR that features H.264 onboard compression. This courses will review features, hardware layout, general navigation, and setup menu operation. Course ID: 0010 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX4104 and DX4500/4600 Series digital video recorders:
• Pelco DVR Solutions *
• DX4104 DVR
• DX4500/4600 DVR
• DX4700/4800 HVR
DX4000 Series
*Instructor-led course
Click on Titles
DX4500/4600 DVR
This course provides an overview and technical training for the DX4500/4600 DVRs. Course ID: 0183 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX4104 and DX4500/4600 Series digital video recorders:
• Pelco DVR Solutions *
• DX4104 DVR
• DX4500/4600 DVR
• DX4700/4800 HVR
DX4000 Series
*Instructor-led course
Click on Titles
DX4700/4800 Hybrid Video Recorder
This e-Learning course introduces the DX4700/DX4800 Hybrid Video Recorder, including the features, benefits, operation, and troubleshooting tips. Course ID: 0348 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX8100 Series digital video recorders:
• DX8100 Hybrid Video Recorder
• DX8100 Installation/Operation *
• DX8100 Remote Client Installation
DX8100 Series
Pelco Products
Click on Titles
*Instructor-led course
IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE MAIN MENU
This track is specific to the DX8100 Series digital video recorders:
• DX8100 Hybrid DVR
• DX8100 Installation/Operation *
• DX8100 Remote Client Installation
DX8100 Series
*Instructor-led course
Click on Titles
DX8100 Hybrid Video Recorder
This e-Learning course is a product introduction for the DX8100 version 2.0 hybrid video recorder, including the features, installation, and operation. Course ID: 0213 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX8100 Series digital video recorders:
• DX8100 Hybrid DVR
• DX8100 Installation/Operation *
• DX8100 Remote Client Installation
DX8100 Series
*Instructor-led course
Click on Titles
DX8100 Installation/Operation
This instructor-led class covers complete installation and operation of the DX8100 DVR. Labs will include saving video, programming, recording schedules, and client software operation. Course ID: 0302 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to the DX8100 Series digital video recorders:
• DX8100 Hybrid DVR
• DX8100 Installation/Operation *
• DX8100 Remote Client Installation
DX8100 Series
*Instructor-led course
Click on Titles
DX8100 Remote Client Installation
This course is an e-Learning tutorial for installing the DX8000/8100 remote client. Course ID: 0184 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products
MAIN MENU IP CAMERAS PTZ CAMERAS DX4000 SERIES DX8100 SERIES CAMCLOSURE
This track is specific to Pelco Systems:
• Endura
• Digital Sentry
• CM9700
For information on pre-requisites, please go to the PGTI Training Schedule
Systems Track
Pelco Systems
Click on Titles
If you’re interested in additional training materials and classes, please visit the
Pelco Global Training Institute
MAIN MENU
This track is specific to Endura 2.0 Series:
• EnduraXpress Fundamentals
• Endura Certification *
• Endura Installation and Configuration *
For information on pre-requisites, please go to the PGTI Training Schedule
Endura
Pelco Systems
Click on Titles
*Instructor-led course
ENDURA DIGITAL SENTRY CM9700
If you’re interested in additional training materials and classes, please visit the
Pelco Global Training Institute
MAIN MENU
This track is specific to Endura 2.0 Series:
• EnduraXpress Fundamentals
• Endura Certification *
• Endura Installation and Configuration *
For information on pre-requisites, please go to the PGTI Training Schedule
Endura
*Instructor-led course
Click on Titles
Click on Titles
Click on Titles
Click on Titles
EnduraXpress Fundamentals
In this e-Learning course, learn more about the features and benefits of EnduraXpress, including how to set up the hardware, the setup wizards, installing and configuring the software, and camera setup and recording. Course ID: 0214 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Systems If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to Endura 2.0 Series:
• EnduraXpress Fundamentals
• Endura Certification *
• Endura Installation and Configuration *
For information on pre-requisites, please go to the PGTI Training Schedule
Endura
*Instructor-led course
Click on Titles
Click on Titles
Click on Titles Click on Titles
Click on Titles
Endura Certification
This course provides instruction of key topics necessary to achieve Endura Certification, including Endura components, features, and functionality. The course conveys information about essential network requirements and best practices for designing a fault tolerant Endura installation. A discussion of the environment requirements for an Endura system is included. The hands-on portion of the course offers exercises in installing, configuring, and customizing an Endura system. Upon completion of the course, attendees are eligible to take the Endura Certified Professional certification exam. Course ID: 0372 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Systems If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to Endura 2.0 Series:
• EnduraXpress Fundamentals
• Endura Certification *
• Endura Installation and Configuration *
For information on pre-requisites, please go to the PGTI Training Schedule
Endura
*Instructor-led course
Click on Titles Click on Titles
Click on Titles Click on Titles
Click on Titles
Endura Installation and Configuration
This lab-intensive course offers students hands-on learning including installation, configuration, and customizing an Endura system. This course is designed for dealers and integrators who install and maintain Endura systems for large end-user installations. The course assumes knowledge of video security principles and basic IP addressing. Prerequisite: Video Security Basics on-line pre-exam. Note: This course does not lead to Endura certification. Pre –requisite: The following e-Learning courses are recommended prior to taking the Endura Installation and Configuration course – Megapixel Technology Basics, Sarix IP Cameras, NET5400T Encoders for Endura, and Introduction to Networks e-Learning. It is recommended that students without entry-level IP knowledge take Network Fundamentals for Video Security I.
Course ID: 0368 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Systems If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
Pelco Products
This track is specific to the Digital Sentry Series:
• Microsoft for DS
• Digital Sentry Systems
• Digital Sentry Product Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
Digital Sentry
Click on Titles
If you’re interested in additional training materials and classes, please visit the
Pelco Global Training Institute
*Instructor-led course
ENDURA DIGITAL SENTRY CM9700 MAIN MENU
This track is specific to the Digital Sentry Series:
• Microsoft for DS
• Digital Sentry Systems
• Digital Sentry Product Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
Digital Sentry
*Instructor-led course
Pelco Products
Microsoft for DS The topics for this e-Learning course are Windows services; basic Microsoft functions including system administration, event viewer, computer naming, and user account creation and administration; basic networking including IP addressing, gateways, firewalls, LANs, WANs, subnetting, IP utilities for troubleshooting systems, and network utilization. Course ID: 0187 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
If you’re interested in additional training materials and classes, please visit the
Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to the Digital Sentry Series:
• Microsoft for DS
• Digital Sentry Systems
• Digital Sentry Product Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
Digital Sentry
*Instructor-led course
Click on Titles
Digital Sentry Systems
This e-Learning course is a basic product overview and describes the physical installation and configuration setup. Course ID: 0182 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to the Digital Sentry Series:
• Microsoft for DS
• Digital Sentry Systems
• Digital Sentry Product Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
Digital Sentry
*Instructor-led course
Click on Titles
Digital Sentry Certification
The instructor-led course covers Digital Sentry’s physical architecture, hardware, and software services; explaining the differences between the stand-alone DS Xpress and distributed DS Enterprise systems. Students will be trained on the Digital Sentry client interface, administration and configuration. Key product information will be presented in both lecture format and through the use of self directed, student labs. Students will build both stand-alone and distributed systems through the student labs. A final assessment is given to determine mastery of course content. Course ID: 0300 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to the CM9700 Series:
• CM9770/9780 Product Introduction
• CM9700 Certification *
• CM9700 Advanced Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
CM9700 Series
Pelco Products
Click on Titles
If you’re interested in additional training materials and classes, please visit the
Pelco Global Training Institute
*Instructor-led course
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to the CM9700 Series:
• CM9770/9780 Product Introduction
• CM9700 Certification *
• CM9700 Advanced Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
CM9700 Series
*Instructor-led course
Click on Titles CM9770/9780 Product Introduction
This e-Learning course is an introduction to the main component features and basic system architecture of the CM9700-CC1 processing unit, CM9770/9780-MXB matrix bay, and the CM9760-KBD keyboard. Course ID: 0160 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
ENDURA DIGITAL SENTRY CM9700 MAIN MENU
This track is specific to the CM9700 Series:
• CM9770/9780 Product Introduction
• CM9700 Certification *
• CM9700 Advanced Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
CM9700 Series
*Instructor-led course
Click on Titles
CM9700 Certification
This instructor-led course covers the components, configurations, operations, and programming of CM9700 systems including operator/keyboard management, PTZ control, alarms, and macros. This course makes extensive use of hands-on training exercises. Prerequisite: Video Security Basics on-line pre-exam. Course ID: 0299 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700
This track is specific to the CM9700 Series:
• CM9770/9780 Product Introduction
• CM9700 Certification *
• CM9700 Advanced Certification *
For information on pre-requisites, please go to the PGTI Training Schedule
CM9700 Series
*Instructor-led course
Click on Titles
CM9700 Advanced Certification
This course covers the components, configurations, operations, and programming of CM9700 systems including operator/keyboard management, PTZ control, alarms, macros and multi-node systems and integration. This course makes extensive use of hands-on training exercises. Course ID: 0367 To enroll in this course, go to training.pelco.com, select the Course Catalog link and enter the course ID.
Click Here to Close Window
Pelco Products If you’re interested in additional training
materials and classes, please visit the Pelco Global Training Institute
MAIN MENU ENDURA DIGITAL SENTRY CM9700