v6 course catalog

V6Course Material Catalog

January 2009 Edition

V6 Course Material Catalog Jan 30, 2009 1/52

V6 Course Material Catalog

CATIA Course Material .......................................................................... 4CATIA Equipments Solutions ............................................................................... 4

V6VET: CATIA V6 Electrical Transition (EDU-CAT-E-V6VET- - V6R2009x) .......................... 5

CATIA Mechanical Solutions ................................................................................ 7FTA: 3D Functional Tolerancing & Annotation (EDU-CAT-E-FTA-F - V6R2009) .................... 8V6AF: CATIA Structural Analysis Fundamentals (EDU-CAT-E-V6AF-F - V6R2009x) ............ 9V6ET: CATIA V6 Expert Transition (EDU-CAT-E-V6ET-A - V6R2009x) ............................... 10V6FT: CATIA V6 Fundamentals Transition (EDU-CAT-E-V6FT-F - V6R2009x) ................... 11V6FT: CATIA V6 Fundamentals Transition (EDU-CAT-E-V6FT-F - V6R2009) ..................... 12

CATIA Shape Solutions ...................................................................................... 13V6ST: CATIA V6 Surfaces Transition (EDU-CAT-E-V6ST-F - V6R2009) ............................. 14

Digital Simulation Solutions ................................................................................ 15V6AT: CATIA V6 Analysis Transition (EDU-CAT-E-V6AT-F - V6R2009) .............................. 16

CATIA Systems Solutions .................................................................................. 17CSD: Modeling and Simulation with Dymola/Modelica (EDU-CAT-E-CSD-F - V6R2009) ..... 18LCM: Control & Logic Modeling in CATIA Systems (EDU-CAT-E-LCM-F - V6R2009) .......... 19

ENOVIA Course Material ..................................................................... 20ENOVIA MatrixOne Solutions ............................................................................. 20

AAB: ENOVIA Apparel Accelerator for Business Administrator (EDU-ENOV-E-AAB-F - V6R2009)AAC: ENOVIA Apparel Accelerator for Color (EDU-ENOV-E-AAC-F - V6R2009) ................ 22AAD: ENOVIA Apparel Accelerator for Designer (EDU-ENOV-E-AAD-F - V6R2009) ........... 23AAF: ENOVIA Apparel Accelerator for Fabric (EDU-ENOV-E-AAF-F - V6R2009) ................ 24AAG: ENOVIA Apparel Accelerator for Grading (EDU-ENOV-E-AAG-F - V6R2009) ............ 25AAM: ENOVIA Apparel Accelerator for Trim (EDU-ENOV-E-AAM-F - V6R2009) ................. 26AAP: ENOVIA Apparel Accelerator for Product Manager (EDU-ENOV-E-AAP-F - V6R2009)AAT: ENOVIA Apparel Accelerator for Technical Designer (EDU-ENOV-E-AAT-F - V6R2009)ECL: ENOVIA Engineering Central (EDU-ENOV-E-ECL-F - V6R2009x) .............................. 29ECL: ENOVIA Engineering Central (EDU-ENOV-E-ECL-F - V6R2009) ................................ 30LCL: ENOVIA Library Central (EDU-ENOV-E-LCL-F - V6R2009x) ....................................... 31M1A: ENOVIA Collaboration Platform System Administration for Oracle (EDU-ENOV-E-M1A-F - V6R2009x)PCL: ENOVIA Program Central (EDU-ENOV-E-PCL-F - V6R2009x) ................................... 33QCL: ENOVIA Matrix Requirements Central (EDU-ENOV-E-QCL-F - V6R2009) ................. 34SAR: ENOVIA LifeSciences Accelerator (EDU-ENOV-E-SAR-F - V6R2009) ....................... 36VCL: ENOVIA Variant Configuration Central (EDU-ENOV-E-VCL-F - V6R2009) ................. 37

3DLive Course Material ........................................................................ 393DLive Solutions ................................................................................................. 39

3DL: ENOVIA 3D Live User - Basic (EDU-3DL-E-3DL-F - V6R2009) ................................... 403SC: ENOVIA 3D Live V6R2009 Connector Administration for ENOVIA SmarTeam V5R18 (EDU-3DL-E-3SC-F - V6R2009)


E3AM1: 3DLive Installation and Customization for ENOVIA MatrixOne (EDU-3DL-E-E3AM1- - V6R1)E3AST: 3DLive Installation and Customization for ENOVIA SmarTeam (EDU-3DL-E-E3AST- - V6R1)E3AV4: 3DLive Installation and Customization for ENOVIA VPM V4 (EDU-3DL-E-E3AV4- - V6R1)E3AV5: 3DLive Installation and Customization for ENOVIA VPM V5 (EDU-3DL-E-E3AV5- - V6R1)LCV: ENOVIA 3D Live Collaborative Review (EDU-3DL-E-LCV-F - V6R2009) .................... 46LFT: CATIA Live FTA Review (EDU-3DL-E-LFT-F - V6R2009) ............................................ 47

3DVIA Course Material ........................................................................ 483DVIA Composer Solutions ................................................................................ 48

CPS: 3DVIA Composer (EDU-VIA-E-CPS-F - V6R1) ............................................................ 49CSN: 3DVIA Composer Advanced (EDU-VIA-E-CSN-A - V6R2009x) .................................. 50

3DVIA Player Solutions ...................................................................................... 51PYR: 3DVIA Player (EDU-VIA-E-PYR-F - V6R2009) ............................................................ 52


CATIA Course Material

CATIA Equipments Solutions

V6 Course Catalog Jan 30, 2009 4/52

CATIA EquipmentsSolutions

V6VET: CATIA V6 Electrical Transition

EDU-CAT-E-V6VET-Course Code EDU-CAT-E-V6VET-CATIA V6R2009xBrand & Release CATIA V6R2009x3 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesNone

ObjectivesUpon completion of this course, you will be able to perform following tasks: - Manage, create and edit documents in V6- Collaborate with the Community- Perform Impact Analysis and Propagation- Design parts in the assembly context- Migrate electrical data from V5 to V6- Create and place electrical devices- Route Geometrical Harness and Wires- Flatten the Wire Harness and create a Wire Harness Drawing- Manage various product configurations

Participants' ProfileElectrical Designers

PrerequisitesStudents attending this course must be familiar with the V5 AutomotiveElectrical Course


Content- Introduction to V6 and PLM 2.0- Connecting to V6- Managing Data in V6- Importing and Exporting Data- Searching and Exploring the Data- Searching for Data- Exploring the Data- Performing Lifecycle Operations- Creating and Editing Documents in V6- Creating and Editing Documents- Creating Engineering Connections- Collaborating with the Community- Introduction to Instant Collaboration- Collaborative Heads-Up Display- Collaborative Design- Co-Review and Co-Design- Impact Analysis and Propagation- Performing Impact Analysis- Editing Links and Relations- Propagating the Data- Designing in Context- Managing the Context- Creating and Using Catalogs- Creating Assembly Features- Migrating from V5 to V6 Electrical- Introduction to V6 Electrical Workbenches- Importing Electrical Data into V6- Creating and Placing Electrical Devices- Creating an Electrical Catalog- Placing Electrical Devices and Supports- Routing Geometrical Harness and Wires- Routing the Geometrical Harness- Managing the Harness Bundles- Creating and Routing Wires- Flattening and Manipulating the Wire Harness- Creating Harness Drawings- Introduction to Product Configuration- Configuration Management in CATIA V6- Master Project

ExercisesEx. 1: Importing, Searching and Exploring data (20min) / All sectorsEx. 2: Creating and Editing Documents (30min) / All sectorsEx. 3: Creating Engineering Connections (15min) / All sectorsEx. 4: Creating Engineering Connections (15min) / All sectorsEx. 5: Instant Collaboration Using V6 (20min) / All sectors



CATIA Mechanical Solutions


CATIA MechanicalSolutions

FTA: 3D Functional Tolerancing & Annotation

EDU-CAT-E-FTA-FCourse Code EDU-CAT-E-FTA-FCATIA V6R2009Brand & Release CATIA V6R20092 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesUpon Completion of this course you will be able to: - Add 3D annotations to a part - Manage and position these annotations - Create and manage annotation planes and views - Manage the 3D geometry associated to the 3D annotations

Participants' ProfileMechanical Designers

PrerequisitesStudents attending this course should be familiar with- Basics of solids and surfaces creation- Basics of knowledge- Basics of V6

Content- Introduction to FT&A- The Tolerancing Advisor- Creating and Managing FTA Annotations- Geometry for 3D Annotations- Advanced Functions

ExercisesNone



V6AF: CATIA Structural Analysis Fundamentals

EDU-CAT-E-V6AF-FCourse Code EDU-CAT-E-V6AF-FCATIA V6R2009xBrand & Release CATIA V6R2009x2 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThe course will cover the basic functionalities of part and assembly analysisunder STA license.

- Manage Simulations Object in CATIA V6R2009x- Create a Structural Analysis Simulation- Prepare a solid or surface model for analysis - Create 1D, 2D and 3D meshes for beam, surface, and solid models - Assign properties, loads and constraints, and define assembly connections - Compute an analysis for a part or an assembly - Generate and display analysis results

Participants' ProfileMechanical DesignersStructural Analysts

PrerequisitesCATIA V5 FundamentalsCATIA V6 Fundamentals Transition

ContentLesson 1: Introduction to Finite Element AnalysisLesson 2: PreprocessingLesson 3: ComputationLesson 4: Post-ProcessingLesson 5: Assembly Structure AnalysisMaster Project: Analysis of RC-Car Assembly

ExercisesNone



V6ET: CATIA V6 Expert Transition

EDU-CAT-E-V6ET-ACourse Code EDU-CAT-E-V6ET-ACATIA V6R2009xBrand & Release CATIA V6R2009x1 dayDuration 1 dayEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT


ObjectivesUpon completion of this course you will be able to: -- Manage skeleton-based assemblies -- Create and edit Publications -- Manage contextual links -- Create and use Catalogs -- Work with large assemblies -- Analyze assemblies -- Perform digital reviews

Participants' ProfileCATIA V5 Designers

PrerequisitesV5 FundamentalsV6 Fundamentals Transition

Content- Managing Product Structure - Creating and editing publications - Using Skeleton Methodology- Designing In Context - Managing the Context - Creating and using catalogs - Creating assembly features- Working wiht large assemblies- Managing Links and Relations- Analysis and Ouptu -Analyzing assemblies in V6 - Introduction to Digital Review - Creating and managing reviews - Sectioning and measurements-Master Project

ExercisesEx. 1: Managing Product Structure / All sectorsEx. 2: Designing in Context / All sectorsEx. 3: Working with large assemblies / All sectorsEx. 4: Links Management / All sectorsEx. 5: Analyzing and reviewing assemblies / All sectorsEx. 6: Master Project / All sectors



V6FT: CATIA V6 Fundamentals Transition

EDU-CAT-E-V6FT-FCourse Code EDU-CAT-E-V6FT-FCATIA V6R2009xBrand & Release CATIA V6R2009x1 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce you to CATIA V6 and the fundamental concepts ofPLM. You will learn how to search for models in the V6 database and how toimport existing V5 data. Using a role-based scenario in the context of anassembly you will learn how to design in collaboration with other users, performmodifications, check impacts and propagate modifications to impacted parts.

Participants' ProfileMechanical Designers, CATIA V5 Designers

PrerequisitesV5 Fundamentals or Part Design/Assembly Design/Drafting

ContentAt the end of the course the student should be able to: -Import existing CATIA V5 data and store in V6 -Search for data in the V6 database -Open V6 parts for modification -Share information with other users -Analyze the impacts of modifications -Propagate modifications

ExercisesEx. 1: Miscellaneous (120min) / All sectors



V6FT: CATIA V6 Fundamentals Transition

EDU-CAT-E-V6FT-FCourse Code EDU-CAT-E-V6FT-FCATIA V6R2009Brand & Release CATIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce you to CATIA V6 and the fundamental concepts ofPLM. You will learn how to search for models in the V6 database and how toimport existing V5 data. Using a role-based scenario in the context of anassembly you will learn how to design in collaboration with other users, performmodifications, check impacts and propagate modifications to impacted parts.

Participants' ProfileMechanical Designers, CATIA V5 Designers

PrerequisitesV5 Fundamentals or Part Design/Assembly Design/Drafting

ContentAt the end of the course the student should be able to: -Import existing CATIA V5 data and store in V6 -Search for data in the V6 database -Open V6 parts for modification -Share information with other users -Analyze the impacts of modifications -Propagate modifications




CATIA Shape Solutions


CATIA ShapeSolutions

V6ST: CATIA V6 Surfaces Transition

EDU-CAT-E-V6ST-FCourse Code EDU-CAT-E-V6ST-FCATIA V6R2009Brand & Release CATIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce you to CATIA V6 and the fundamental concepts ofPLM. You will learn how to search for models in the V6 database and how toimport existing V5 data. Using a role-based scenario two designers willcollaborate to create a new product using surface modeling techniques. Theresulting model will be analyzed and corrected before propagating themodifications to the database.

Participants' ProfileSurface Designer, CATIA V5 Designers

PrerequisitesV5 for Surfaces or GSD

ContentAt the end of the course the student should be able to:-Import existing CATIA V5 data and store in V6-Search for data in the V6 database-Open V6 parts for modification-Share information with other users-Analyze the impacts of modifications-Propagate modifications




Digital Simulation Solutions


Digital SimulationSolutions

V6AT: CATIA V6 Analysis Transition

EDU-CAT-E-V6AT-FCourse Code EDU-CAT-E-V6AT-FCATIA V6R2009Brand & Release CATIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course will introduce you to CATIA V6 and the fundamental concepts ofPLM. You will learn how to search for models in the V6 database and how toimport existing V5 data. Using a role-based scenario in the context of anassembly you will learn how to make Analysis Simulation in collaboration withother users, perform modifications, check impacts and propagate modificationsto impacted parts.

Participants' ProfileMechanical Designers, Structural Analysts

PrerequisitesCATIA V5 Analysis

ContentAt the end of the course the student should be able to:-Import existing CATIA V5 data and store in V6-Search for data in the V6 database-Open V6 parts for modification-Understand the new V6 practices for Analysis Simulation-Share information with other users-Analyze the impacts of modifications-Propagate modifications




CATIA Systems Solutions


CATIA SystemsSolutions

CSD: Modeling and Simulation with Dymola/Modelica

EDU-CAT-E-CSD-FCourse Code EDU-CAT-E-CSD-FCATIA V6R2009Brand & Release CATIA V6R20092 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT

Training Material ReferencesFoils: EDU-CAT-E-CSD-FF-V6R2009

ObjectivesIn this course, you will learn basic use of Dymola and the basis of the Modelicalanguage

PrerequisitesNone

Content- Introduction to Simulation and Modeling- Overview of Modelica/Dymola- Modelica- Modeling with Dymola- Bonus

ExercisesNone


CATIA SystemsSolutions

LCM: Control & Logic Modeling in CATIA Systems

EDU-CAT-E-LCM-FCourse Code EDU-CAT-E-LCM-FCATIA V6R2009Brand & Release CATIA V6R20091.5 daysDuration 1.5 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT

Training Material ReferencesFoils: EDU-CAT-E-LCM-FF-V6R2009

ObjectivesIn this lesson, you will learn how to model a functional or logical componentwith the LCMgraphical programming language

PrerequisitesNone

Content- Introduction: LCM in the V6- LCM programming language overview- Authoring with V6 LCM editors: the CSM module & block editor for libraryworkbench- Annexes: directions, libraries and externs- Advanced tasks

ExercisesNone


ENOVIA Course Material

ENOVIA MatrixOne Solutions


ENOVIA MatrixOneSolutions

AAB: ENOVIA Apparel Accelerator for BusinessAdministrator

EDU-ENOV-E-AAB-FCourse Code EDU-ENOV-E-AAB-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAB-FF-V6R2009

ObjectivesThis course describes the Business Administrator’s role in detail, including thesetting up of the system and its maintenance.At the end of this course you will be able to:- Create Groups, Roles and Persons- Control Access for Persons using Management of Roles- Set up and manage a line plan- Set up a Dashboard for a Line Plan- Create a Calendar- Create a Workflow

Participants' ProfileBusiness administrators who will supporting the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Setting up the System- Managing Line Plans- Creating Dashboards- Creating Placeholder Calendars- Workflow- Appendix - Apparel Roles

ExercisesNone



AAC: ENOVIA Apparel Accelerator for Color

EDU-ENOV-E-AAC-FCourse Code EDU-ENOV-E-AAC-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAC-FF-V6R2009

ObjectivesIn this course you will learn to Create Colors, Create Seasonal Libraries,Create and Manage Lab Dips.At the end of this course you will be able to:- Login to the System- Use the Standard Features of the System- Create Colors- Create Seasonal Libraries- Create and Manage a Lab Dip

Participants' ProfileColor Specialist who will be using the Apparel Accelerator to manage colors

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Color Creation- Seasonal Library Creation- Lab Dip Creation

ExercisesNone



AAD: ENOVIA Apparel Accelerator for Designer

EDU-ENOV-E-AAD-FCourse Code EDU-ENOV-E-AAD-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAD-FF-V6R2009

ObjectivesIn this course, you will learn how to Add Colorways from the Seasonal Library,create new Marketing Names, Utilize Issues, Discussions, ReferenceDocuments, View and Create Costing Scenarios.

Participants' ProfileApparel Designers that will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Creating a Product

ExercisesNone



AAF: ENOVIA Apparel Accelerator for Fabric

EDU-ENOV-E-AAF-FCourse Code EDU-ENOV-E-AAF-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAF-FF-V6R2009

ObjectivesThis course describes the Fabric Developer’s role in detail. You will learn toCreate Fabrics of different types and Edit the Fabric Attributes.

At the end of this class you will be able to:- Create Fabrics of different types- Edit the Fabric Attributes- Edit Sourcing Data- Add Colors and Vendor Colors- Use all of the side bar options- Search for Fabrics- View the Material Forecast from a Line Plan

Participants' ProfileFabric Developers who will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Fabric Entry Data- Fabric Attributes- Fabric Development Sourcing Data- Fabric Sidebar Options

ExercisesNone



AAG: ENOVIA Apparel Accelerator for Grading

EDU-ENOV-E-AAG-FCourse Code EDU-ENOV-E-AAG-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAG-FF-V6R2009

ObjectivesIn this course you will learn to Enter and edit the Points of Measure, Enter / edit/ copy the Grade Rules and Create Blocks.

At the end of this course you will be able to:- Enter and edit the Points of Measure- Enter, edit and copy the Grade Rules- Create Blocks

Participants' ProfileGrading Specialist who will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Setting up the Point of Measure (POM) Library- Setting up the Grade Rule Library

ExercisesNone



AAM: ENOVIA Apparel Accelerator for Trim

EDU-ENOV-E-AAM-FCourse Code EDU-ENOV-E-AAM-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAM-FF-V6R2009

ObjectivesIn this course you will learn about Trim Development. Trims are items such asButtons, Zippers and other items that are used in the products created in theApparel industry.

Participants' ProfileTrim developers who will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Trim Entry Data- Trim Development Sourcing Data- Sidebar Attributes- Trims in the Seasonal Library- Finding a Trim- Label Entry- Finding Labels- Packaging Entry

ExercisesNone



AAP: ENOVIA Apparel Accelerator for ProductManager

EDU-ENOV-E-AAP-FCourse Code EDU-ENOV-E-AAP-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAP-FF-V6R2009

ObjectivesThis course describes the Product Manager’s role in detail. You will learn toFind a Line Plan, Create a Product and Run Reports.

Participants' ProfileProduct Managers who will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Product Management: Creating a Product- Reporting

ExercisesNone



AAT: ENOVIA Apparel Accelerator for TechnicalDesigner

EDU-ENOV-E-AAT-FCourse Code EDU-ENOV-E-AAT-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-AAT-FF-V6R2009

ObjectivesIn this course you will learn about Setting up Measurement Charts, FittingSamples, Creating Bill of Labor and Creating Bill of Materials.

Participants' ProfileTechnical Designers who will be using the Apparel Accelerator

PrerequisitesNone

Content- Logging In into ENOVIA Apparel Accelerator- Standard Features in ENOVIA Apparel Accelerator- Setting up Measurement Charts- Fit Samples- Construction Details- Bill of Labor- Bill of Materials

ExercisesNone



ECL: ENOVIA Engineering Central

EDU-ENOV-E-ECL-FCourse Code EDU-ENOV-E-ECL-FENOVIA V6R2009xBrand & Release ENOVIA V6R2009x1 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesAt the end of this course, you will be able to: - Create an Engineering Change Order for a new product.- Create new parts, drawings, and bills of material.- Review and release the new product.- Modify the existing product and create a new revision.

Participants' Profile- Engineering personnel responsible for designing, manufacturing, evaluatingand approving changes to the company’s products. - Administrators responsible for maintaining the Engineering Centralapplication.

PrerequisitesYou must have completed Navigating the ENOVIA Business ProcessApplications web-based training course, or have previous experience with theENOVIA Business Process application features.

Content- Introduction to Engineering Central- Working with Parts and Drawings- Releasing Parts and Drawings- Revising Existing Parts/Assemblies- Manufacturer Equivalent Part Management and Using Management Tools- Collaboration Partners

ExercisesEx. 1: Creating an ECO / All sectorsEx. 2: Creating Parts / All sectorsEx. 3: Connecting Drawings to Parts / All sectorsEx. 4: Building an Engineering Bill of Materials / All sectorsEx. 5: Identifying Alternate and Substitute Parts / All sectorsEx. 6: Assigning and Performing Design Work / All sectorsEx. 7: Creating Routes / All sectorsEx. 8: Promoting Parts and Drawings / All sectorsEx. 9: Reviewing and Releasing an ECO / All sectorsEx. 10: Creating a Product Line / All sectorsEx. 11: Revising Parts / All sectorsEx. 12: Performing Mass EBOM Update / All sectorsEx. 13: Creating Part Families / All sectorsEx. 14: Using Management Reports / All sectorsEx. 15: Adding Collaboration Partners / All sectors



ECL: ENOVIA Engineering Central

EDU-ENOV-E-ECL-FCourse Code EDU-ENOV-E-ECL-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-ENOV-E-ECL-FF-V6R2009 Exercises: EDU-ENOV-E-ECL-FX-V6R2009 Instructor Foils: EDU-ENOV-E-ECL-FI-V6R2009

ObjectivesAt the end of this course, you will be able to: - Create an Engineering Change Order for a new product.- Create new parts, drawings, and bills of material.- Review and release the new product.- Modify the existing product and create a new revision.

Participants' Profile- Engineering personnel responsible for designing, manufacturing, evaluatingand approving changes to the company’s products. - Administrators responsible for maintaining the Engineering Centralapplication.

PrerequisitesYou must have completed Navigating the ENOVIA Business ProcessApplications web-based training course, or have previous experience with theENOVIA Business Process application features.

Content- Introduction to Engineering Central- Working with Parts and Drawings- Releasing Parts and Drawings- Revising Existing Parts/Assemblies- Manufacturer Equivalent Part Management and Using Management Tools- Collaboration Partners

ExercisesEx. 1: Creating an ECO / All sectorsEx. 2: Creating Parts / All sectorsEx. 3: Connecting Drawings to Parts / All sectorsEx. 4: Building an Engineering Bill of Materials / All sectorsEx. 5: Identifying Alternate and Substitute Parts / All sectorsEx. 6: Assigning and Performing Design Work / All sectorsEx. 7: Creating Routes / All sectorsEx. 8: Promoting Parts and Drawings / All sectorsEx. 9: Reviewing and Releasing an ECO / All sectorsEx. 10: Creating a Product Line / All sectorsEx. 11: Revising Parts / All sectorsEx. 12: Performing Mass EBOM Update / All sectorsEx. 13: Creating Part Families / All sectorsEx. 14: Using Management Reports / All sectorsEx. 15: Adding Collaboration Partners / All sectors



LCL: ENOVIA Library Central

EDU-ENOV-E-LCL-FCourse Code EDU-ENOV-E-LCL-FENOVIA V6R2009xBrand & Release ENOVIA V6R2009x1 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesIn this course, you will learn to:- Identify features of ENOVIA Library Central and explain when they are used.- Work with and create different types of Libraries and their related structures.- Define access to folders and their associated documents.- Understand the Common Document Management (CDM) component.- Understand the Common Profile Management component.

Participants' Profile- Design engineers, Manufacturing Engineers, Project managers, Technicalwriters- Business Administration, System Administration

PrerequisitesNone

Content- Introduction to Library Central- Adding Document Objects and Files- Working With Document Objects- Adding Part and Related Objects- Using the Multiple Classification Module (MCM)

ExercisesEx. 1: Logging in to ENOVIA Matrix Library Central / All sectorsEx. 2: Searching for Objects / All sectorsEx. 3: Creating and Connecting Objects / All sectorsEx. 4: Checking Files In and Out / All sectorsEx. 5: Adding Sheets / All sectorsEx. 6: Promoting a Document Object / All sectorsEx. 7: Revising a Document Object / All sectorsEx. 8: Using Other Features / All sectorsEx. 9: Creating Folders / All sectorsEx. 10: Creating and Connecting Object / All sectorsEx. 11: Classifying Part Family Objects / All sectorsEx. 12: Managing Attribute Groups / All sectorsEx. 13: Defining Your Business Structure / All sectors



M1A: ENOVIA Collaboration Platform SystemAdministration for Oracle

EDU-ENOV-E-M1A-FCourse Code EDU-ENOV-E-M1A-FENOVIA V6R2009xBrand & Release ENOVIA V6R2009x3 daysDuration 3 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesENOVIA Collaboration Platform System Administration for Oracle teaches youhow to install and use the various storage structures in the ENOVIACollaboration Platform system as well as create and maintain the Oracledatabase.

Participants' Profile· The ENOVIA project user from the new or prospective customer organizationwho has overall responsibility for using the system.· Department heads affected by the installation of the system and who areresponsible for controlling network resources.· Team members who will be responsible for administering ENOVIACollaboration Platform storage structures and establishing distribution andreplication.

PrerequisitesThis course fits into the overall ENOVIA training curriculum. Prior to taking thiscourse, you should have successfully completed the following:· Using ENOVIA Navigator

Content· Create and modify storage structures.· Establish Replication and Distribution of Stores.· Understand the Oracle Architecture and how the platform works with theENOVIA database.· Create an Oracle database in preparation for ENOVIA Collaboration Platforminstallation.· Support dual databases for your testing and production environments.· Perform basic backup and networking procedures.

ExercisesNone



PCL: ENOVIA Program Central

EDU-ENOV-E-PCL-FCourse Code EDU-ENOV-E-PCL-FENOVIA V6R2009xBrand & Release ENOVIA V6R2009x1 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesUsing ENOVIA Program Central teaches you how to use the ENOVIA businessprocess application developed for managing projects.

Participants' ProfileThe audience for the ENOVIA Program Central course are: - Any personnel who are working on projects. - Business Administration and System Administration personnel who will beresponsible for maintaining the Program Central application.

PrerequisitesNone

Content- Introduction to ENOVIA Program Central- Common Profile Management- Creating the Project Structure- Managing Ongoing Projects- Creating Projects from Templates, Clones and Imported Data- Appendix

ExercisesNone



QCL: ENOVIA Matrix Requirements Central

EDU-ENOV-E-QCL-FCourse Code EDU-ENOV-E-QCL-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesAt the end of this course, you will be able to: - Understand how ENOVIA Requirements Central meets your business needs. - Create a Product Line, Model and Product. - Capture requirements from an MS Word requirement specification documentinto the ENOVIA database. - Connect Captured Requirements to a Model.- Commit Candidate Product Requirements to a Product.- Create Decomposed and Derived Requirements.- Capture design rationale by creating design Decisions.- Create test plans to verify that the technical solution meets theRequirement(s).- Create Hardware and Software Builds for the Product revision.- Revise a released Requirement using an Engineering Change.

Participants' Profile- Product Managers and System Engineers who are responsible for: -> Creating new Product Lines, Models and Products. -> Defining the Product’s structure. -> Committing Candidate Requirements to Product revisions. -> Creating Engineering Changes, Portfolios and Builds. -> Defining Product Roadmaps. -> Creating Product Revisions and Versions.- Marketing Managers who are responsible to ensure that all Product Line,Model and Product marketing information such as Marketing Text, MarketingName and images are defined and managed properly.

- Design Engineers and Senior Design Engineers who are responsible for: -> Implementing the technical solution proposed by an Engineering Change. -> Setting up test plans (Test Cases) to be executed by Quality Engineering. -> Creating Impact Analyses and connect them to Engineering Changes.

- Software Quality Engineer, Quality Manager, Senior Quality Engineer whoare responsible for: -> Creating Test Executions and manage planned execution dates, actualexecution dates, execution test results and slip days via the Test Executionobjects.

- Software Engineers who are responsible for: -> Builds for the software product and its structure. -> Managing the definition of the Product Build, their source code and issueresolution.

- Issue Manager who is responsible for: -> Analyzing and evaluating the problem or concern and diagnozing aresolution. -> Changing the owner or the type of an Issue when in the Create state. Business Administration and System Administration personnel who will beresponsible for maintaining the ENOVIA Requirements Central application.


PrerequisitesYou must have completed Introduction the ENOVIA Matrix BusinessApplications web-based training course, or have previous experience with theENOVIA Matrix Business Application features.

Content- Introduction to ENOVIA Requirements Central - Product Line, Model and Requirement Management - Product Management, Decomposed & Derived Requirements and Decisions - More PM & Build Management and Structure Compare & Traceability Reports

- Issue & Engineering Change Management

ExercisesEx. 1: Ex. 1: Create a new Product Line / All sectorsEx. 2: Ex. 2: Create Models under the Product Line / All sectorsEx. 3: Ex. 3: Capturing Requirements for the Model / All sectorsEx. 4: Ex. 4: Define detailed information for the Products and create productportfolios and product roadmaps / All sectorsEx. 5: Ex. 5: Create decomposed and derived requirements for high-levelrequirements and create decisions for theses decomposed and derivedrequirements / All sectorsEx. 6: Ex. 6: Commit the Candidate Product Requirements to the Product / AllsectorsEx. 7: Ex. 7: Create new Product revisions and versions for the Product / AllsectorsEx. 8: Ex. 8: Create Use and Test Cases to validate requirements and comparerequirement specification structures using structure compare reports / AllsectorsEx. 9: Ex. 9: Create Hardware and Software Builds for the Product / All sectorsEx. 10: Ex. 10: Report an Issue against a Product / All sectorsEx. 11: Ex. 11: Create an Engineering Change against a Product / All sectors



SAR: ENOVIA LifeSciences Accelerator

EDU-ENOV-E-SAR-FCourse Code EDU-ENOV-E-SAR-FENOVIA V6R2009Brand & Release ENOVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT


Participants' ProfileThe audience for this course is:* Users* Business Administrators* Developers who are responsible for configuring and extending the ENOVIALifeSciences Accelerator.

PrerequisitesThis course fits into the overall ENOVIA training curriculum. Prior to taking thiscourse, it is recommended that you have successfully completed followingcourses (if not, we cover the major points ofeach class):• ENOVIA Platform Modeling Studio• Extending the Business Model with Programming• ENOVIA Matrix Programming with ADK (recommended but not required)

In addition, you should have the following skills and experience:• Comfortable working knowledge of ENOVIA product line.• Some exposure to JSP functionality and technology.

Content- Change Control - Quality Change Manager Role- Change Control - Quality Change Order Approver Role- Change Control - Quality Change Order Author Role- Change Control - Quality Change Order Regulatory Role- Complaints Administration - Administrator Role- Complaints Administration - Approver Role- Complaints Administration - Owner Role- Complaints Administration - Team Member Role- Corrective and Preventive Action - Approver Role- Corrective and Preventive Action - Site Leader Role- Corrective and Preventive Action - Team Leader Role- Corrective and Preventive Action - Team Member Role

ExercisesNone



VCL: ENOVIA Variant Configuration Central

EDU-ENOV-E-VCL-FCourse Code EDU-ENOV-E-VCL-FENOVIA V6R2009Brand & Release ENOVIA V6R20092 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesENOVIA Variant Configuration Central teaches you how to use the ENOVIABusiness Process Application developed to effectively and efficiently managecomplex products across global value chains of employees, customers,suppliers and partners from marketing to product management to systemsengineering to design and test.

Participants' Profile- Product Managers and System Engineers who are responsible for: -> Creating new Product Lines, Models and Products. -> Defining the Product’s structure. -> Committing Candidate Requirements to Product revisions. -> Creating Engineering Changes, Portfolios and Builds. -> Defining Product Roadmaps. -> Creating Product Revisions and Versions.- Marketing Managers who are responsible to ensure that all Product Line,Model and Product marketing information such as Marketing Text, MarketingName and images are defined and managed properly.

- Design Engineers and Senior Design Engineers who are responsible for: -> Implementing the technical solution proposed by an Engineering Change. -> Setting up test plans (Test Cases) to be executed by Quality Engineering. -> Creating Impact Analyses and connect them to Engineering Changes.

- Software Quality Engineer, Quality Manager, Senior Quality Engineer whoare responsible for: -> Creating Test Executions and manage planned execution dates, actualexecution dates, execution test results and slip days via the Test Executionobjects.

- Software Engineers who are responsible for: -> Builds for the software product and its structure. -> Managing the definition of the Product Build, their source code and issueresolution.

- Issue Manager who is responsible for: -> Analyzing and evaluating the problem or concern and diagnozing aresolution. -> Changing the owner or the type of an Issue when in the Create state. Business Administration and System Administration personnel who will beresponsible for maintaining the ENOVIA Requirements Central application.

PrerequisitesYou must have completed Navigating the ENOVIA Business Applicationsweb-based training course, or have previous experience with the ENOVIAMatrix Business Process Application features.


Content- Introduction to ENOVIA Variant Configuration Central- Product Line, Feature & Rule Library and Model Management - Base Product, Product Variant and Product Configuration Management- More PM, Build Management and Structure Compare Reports - Issue & Engineering Change Management

ExercisesNone


3DLive Course Material

3DLive Solutions


3DLiveSolutions

3DL: ENOVIA 3D Live User - Basic

EDU-3DL-E-3DL-FCourse Code EDU-3DL-E-3DL-F3DLive V6R2009Brand & Release 3DLive V6R20090.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanionMethod Companion


ObjectivesThis course is designed to teach you how to use 3DLive to search, view andshare information in a collaborative 3D environment. The course is highlyinteractive, which helps you to learn in a simulated and guided environment.You will learn about the basic search mechanism, the different ways tovisualize search results, and how to view the parents of a searched PLM objecteven before opening it. You will also learn different ways to visualize 3D dataand look up PLM information related to it. Additionally, you will learn how to use3DLive collaboration features that allow you to centre your discussions aroundthe 3D product definition.

Participants' ProfileManagers, Executives, Product Designers, Engineers, Reviewers, Sales &Support Staff, ...

PrerequisitesStudents attending this course should be well-versed in the Microsoft Windowsoperating environment

ContentBy the end of this course you will be able to: - Connect to your company 3DLive server- Search and navigate through the PLM data- Use the different visualization modes and tools available for exploring 3Dmodels- Look up the entire / specific PLM information of a selected object- Collaborate with your colleagues and share 3D product views with them

ExercisesNone


3DLiveSolutions

3SC: ENOVIA 3D Live V6R2009 ConnectorAdministration for ENOVIA SmarTeam V5R18

EDU-3DL-E-3SC-FCourse Code EDU-3DL-E-3SC-F3DLive V6R2009Brand & Release 3DLive V6R20092 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT

Training Material ReferencesFoils: EDU-3DL-E-3SC-FF-V6R2009

ObjectivesYou will learn how to install and customize 3DLive with ENOVIA SmarTeam

Participants' Profile- ENOVIA SmarTeam administrators- PLM administrators

Prerequisites- Familiarity with ENOVIA SmarTeam Administration- Understanding of CATIA V5 Administration

Content* Introduction to 3DLive - 3DLive Basics - 3DLive User Experience – Features through scenario - 3DLive Configuration & Products - 3DLive Prerequisites - 3DLive Architecture in SmarTeam Environment

* 3DLive Administration - 3DLive Server Installation - 3DLive Client Installation - Customized SmarTeam Environment for 3DLive Setup - 3DLive Client Setup - 3DLive Deployment - Licensing - Appendix A: Customize the PLM Compass

ExercisesNone


3DLiveSolutions

E3AM1: 3DLive Installation and Customization forENOVIA MatrixOne

EDU-3DL-E-E3AM1-Course Code EDU-3DL-E-E3AM1-3DLive V6R1Brand & Release 3DLive V6R12 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT


ObjectivesIn this course you will learn how to install 3DLive, configure and customize it soas to fit in a customized ENOVIA MatrixOne installation. This will allow CATIAV5 users to fully benefit from the 3DLive environment with their data stored inENOVIA MatrixOne.

Participants' Profile- ENOVIA MatrixOne and CATIA V5 Administrators- PLM Architects

Prerequisites- ENOVIA 3DLive User knowledge as presented in 3DLive User Companion

and

- ENOVIA MatrixOne Administration knoweledge and experience- Basic knowledge on Operating Systems and Database management

Content- 3DLIVE Architecture- 3DLIVE Installation- MatrixOne setup for 3DLIVE- 3DLIVE Customization- 3DLIVE Deployment

ExercisesNone


3DLiveSolutions

E3AST: 3DLive Installation and Customization forENOVIA SmarTeam

EDU-3DL-E-E3AST-Course Code EDU-3DL-E-E3AST-3DLive V6R1Brand & Release 3DLive V6R12 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT


ObjectivesIn this course you will learn how to install 3DLive, configure and customize it soas to fit in a customized ENOVIA SmarTeam installation. This will allow CATIAV5 users to fully benefit from the 3DLive environment with their data stored inENOVIA SmarTeam.

Participants' Profile- ENOVIA SmarTeam and CATIA V5 Administrators - PLM Architects


and

- ENOVIA SmarTeam Administration knoweledge and experience - Basic knowledge on Operating Systems and Database management

Content- 3DLIVE Architecture - 3DLIVE Installation - SmarTeam setup for 3DLIVE - 3DLIVE Customization - 3DLIVE Deployment

ExercisesNone


3DLiveSolutions

E3AV4: 3DLive Installation and Customization forENOVIA VPM V4

EDU-3DL-E-E3AV4-Course Code EDU-3DL-E-E3AV4-3DLive V6R1Brand & Release 3DLive V6R12 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT


ObjectivesIn this course you will learn how to install, configure and customize 3DLive inorder to connect a customized ENOVIA VPM V4 installation to offer VPM V4data in a 3DLive environment.

Participants' Profile- ENOVIA VPM V4 and CATIA V5 Administrators- PLM Architects

Prerequisites- ENOVIA VPM V4 Administration courses: Database structure, Profiles Update - IT knowledge on Operating Systems (Unix & Windows), DatabaseManagement, basics of XML- Basic knowledge of ENOVIA VPM V4 Programming

Content- 3DLIVE Architecture- 3DLIVE Installation- VPM V4 setup for 3DLIVE- 3DLIVE Customization- 3DLIVE Deployment

What is new in this releaseAIX 5.3 ML03 with 64 bit kernel : DB2 8.2.4 or higher (ideally 8.2.7)

Windows 2003 Server : Lotus Instant Messaging 7.0 installed (Lotus Dominoand Lotus SameTime)

Windows XP SP2 : XML Core Services 4.0 Service and Sun JRE 5 update 7

ExercisesNone


3DLiveSolutions

E3AV5: 3DLive Installation and Customization forENOVIA VPM V5

EDU-3DL-E-E3AV5-Course Code EDU-3DL-E-E3AV5-3DLive V6R1Brand & Release 3DLive V6R12 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsILTMethod ILT


ObjectivesIn this course you will learn how to install 3DLive, configure and customize it soas to fit in a customized ENOVIA V5 installation. This will allow CATIA V5users to fully benefit from the 3DLive environment with their data stored inENOVIA V5.

Participants' Profile- ENOVIA VPM V5 and CATIA V5 Administrators


and

- ENOVIA VPM V5 Administration knoweledge and experience- Basic knowledge on Operating Systems and Database management

Content- 3DLIVE Architecture- 3DLIVE Installation- VPM V5 setup for 3DLIVE- Indexation of Vault, LCA DB- 3DLIVE Customization- 3DLIVE Deployment

ExercisesNone


3DLiveSolutions

LCV: ENOVIA 3D Live Collaborative Review

EDU-3DL-E-LCV-FCourse Code EDU-3DL-E-LCV-F3DLive V6R2009Brand & Release 3DLive V6R20090.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT


ObjectivesThis course teaches you how to use Live Collaborative Review to facilitatecollaboration between team members involved in reviews and inspections. Youwill learn how to use the measurement, sectioning, and annotation capabilitiesof Live Collaborative Review, and how to save and edit the reviews. Thecourse is process-based, and it features interactive simulations at the end ofeach lesson to allow you to practice in a simulated environment. It alsofeatures a Master Exercise for live practice.

Participants' Profile- Product Designers and Engineers who need to explain their design intent toother enterprise users- Documentation, Production, Program Management, Sourcing, Design, Qualityand other such departments where interrogating and annotating the 3D modelis a frequent or occasional requirement

Prerequisites- Students attending this course should have attended the 3DLive User course- They should be well-versed in the Microsoft Windows operating environment

ContentBy the end of this course you will be able to: - Create 2D and 3D annotations to detail the key aspects of a part or anassembly- Use the measurement tools to analyze parts and assemblies- Create and use section planes to perform advanced reviews- Save the reviews to assist others in decision making

ExercisesEx. 1: Master Exercise for the Course (30min) / Automotive


3DLiveSolutions

LFT: CATIA Live FTA Review

EDU-3DL-E-LFT-FCourse Code EDU-3DL-E-LFT-F3DLive V6R2009Brand & Release 3DLive V6R20090.5 dayDuration 0.5 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanionMethod Companion


ObjectivesThis course teaches new users how to use Live Functional Tolerancing andAnnotation Review to visualize, query, and filter mechanical dimensioning andtolerancing information contained within part and assembly files. Students willlearn how to search and examine a part, view annotations and captures, filterand navigate FTA information, and how to use the dimensioning andtolerancing annotations to enhance understanding and improve decisionmaking.

Participants' Profile- Product Reviewers and Presenters, Designers, Engineers- Documentation, Production, Program Management, Sourcing, Design,Quality, and other such departments where interrogating and annotating the 3Dmodel is a frequent or occasional requirement

Prerequisites- Students attending this course should have attended the 3DLive User course- They should be well-versed in the Microsoft Windows operating environment

ContentBy the end of this course you will be able to: - Access and visualize FTA features (Views, Captures, and Annotations)- Show / Hide individual 3D annotation and all annotations of a given type- Display FTA captures- Remove the FTA Clipping Plane of a capture- Filter the 3D annotations

ExercisesEx. 1: Master Exercise for the Course (30min) / Automotive


3DVIA Course Material

3DVIA Composer Solutions


3DVIA ComposerSolutions

CPS: 3DVIA Composer

EDU-VIA-E-CPS-FCourse Code EDU-VIA-E-CPS-F3DVIA V6R1Brand & Release 3DVIA V6R12 daysDuration 2 daysEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-VIA-E-CPS-FF-V6R1 Exercises: EDU-VIA-E-CPS-FX-V6R1

ObjectivesThe course enables users to have knowledge and practice on the mainfunctions of 3DVIA Composer

Participants' ProfileTechnical IllustratorTechnical SupportSales EngineerSales Demonstrator

PrerequisitesWindows.

ContentAt the end of the course the student should be able to- Understand the 3DVIA Composer File Structure- Build a 3DVIA Composer project- Navigate through 3DVIA Composer- Apply various rendering styles and annotations- Make product transformations and animations- Create Bill of Material and technical illustrations- Publish 3DVIA Composer project

ExercisesEx. 1: Case Study: Opening Documents / All sectorsEx. 2: Case Study: Creating Views / All sectorsEx. 3: Case Study: Creating Bill of Material / All sectorsEx. 4: Case Study: Creating Animations / All sectorsEx. 5: Case Study: Updating Data / All sectorsEx. 6: Master Project - Engine Assembly / All sectors


3DVIA ComposerSolutions

CSN: 3DVIA Composer Advanced

EDU-VIA-E-CSN-ACourse Code EDU-VIA-E-CSN-A3DVIA V6R2009xBrand & Release 3DVIA V6R2009x2 daysDuration 2 daysEnglishLanguage EnglishAdvancedLevel AdvancedCompanion and ILTMethod Companion and ILT


ObjectivesThe course enables users to use the advanced functions of 3DVIA Composerand its associated products to create, share, and distribute 3DVIA Composerfiles containing powerful views and animations.

Participants' ProfileTechnical Illustrator Technical Support Sales Engineer Sales Demonstrator

Prerequisites3DVIA Composer Fundamentals

ContentAt the end of the course the student should be able to - Understand the file types and use 3DVIA Sync - Create Advanced Views- Create High Resolution Images - Create Advanced Animations- Share Files using Simplification Module and 3DVIA Safe- Export Files using custom templates

ExercisesNone


3DVIA Course Material

3DVIA Player Solutions


3DVIA PlayerSolutions

PYR: 3DVIA Player

EDU-VIA-E-PYR-FCourse Code EDU-VIA-E-PYR-F3DVIA V6R2009Brand & Release 3DVIA V6R20091 dayDuration 1 dayEnglishLanguage EnglishFundamentalsLevel FundamentalsCompanion and ILTMethod Companion and ILT

Training Material ReferencesFoils: EDU-VIA-E-PYR-FF-V6R2009

ObjectivesThis course is designed to teach you how to use 3DVIA Player. 3DVIA Playeroffers the same high performance as 3DVIA Composer. Much more than asimple viewer, 3DVIA Player makes it possible for content consumers to havea highly interactive experience with product deliverables.

Participants' ProfileTechnical SupportSales EngineerSales DemonstratorManagerReviewer

PrerequisitesWindows

ContentAt the end of the course the student should be able to:- Understand the 3DVIA Player User Interface- Navigate in 3DVIA Player- Render and change the visibility of the model- Annotate the model- Manage a project file

ExercisesNone
