phd-internship...seeking full-time or part-time position post-graduation in the field of diagnostics...

10
PhD-Internship

Upload: others

Post on 04-Sep-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

PhD-Internship

Page 2: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

ZACHARY BALLARD

3544 Vinton Ave. Apt 1 Los Angeles, CA 90034 (972) 762-4573 [email protected]

Seeking full-time or part-time position post-graduation in the field of diagnostics and data science.

EDUCATION

University of California Los Angeles, Los Angeles, California

Master of Science, Pursuing PhD in Electrical Engineering and Computer Engineering, December, 2015- present

Cumulative GPA: 3.7/4.0

Brown University, Providence, Rhode Island

Bachelor of Science in Engineering Physics, May, 2013

Cumulative GPA: 3.8/4.0; Major GPA: 3.8/4.0

EXPERIENCE

Ozcan Lab of Nano-Biophotonics – University of California Los Angeles, Los Angeles, CA

PhD Student Researcher, October 2014 – Present

Leading teams of undergraduate and graduate researchers to develop computational sensing systems

which use machine learning to improve design and performance at the point-of-care

Vollmer Lab of Nanophotonics and Biosensing – Max Planck Institute for the Science of Light

Visiting Researcher, September 2014 to April 2014

Designed and implemented experimental set-up to achieve free-space coupled high-Q whispering

gallery mode resonator in aqueous environment for highly sensitive bio-detection

Xu Lab of Emerging Technologies, Brown University, Providence, RI

Undergraduate Researcher, September 2012 – June 2013

Developed and tested fiber-coupled microcavity probe for robust near-field sensing of bio-molecules

Georgakoudi Non-Linear Optics Lab, Tufts University, Medford, MA

Visiting Reseacher, June 2012 – September 2013

Imaged and analyzed in infarcted heart tissue with nonlinear optics

Intelligent Systems Division –NASA Ames Research Center, Mountain View, CA

Undergraduate Student Researcher, June 2011 – August 2011

Constructed and programmed data acquisition and control systems in remote rover vehicles

SKILLS

Data science and machine learning; MATLAB, Python, TensorFlow, Keras

Nanofabrication of photonic sensors, metal deposition, etching, E-beam lithography, soft lithography

Wet-lab experience developing surface chemistry and immuno-chemistry protocols

PROFESSIONAL ASSOCIATIONS

Optical Society of America (OSA), Student member, June 2013 – Present

Society for Photographic Instrumentation Engineers (SPIE), Student member- July 2017– Present

HONORS

SPIE Optics Photonics and Education Scholarship Winner – April 2018

Audience Choice Winner and Finalist in 2018 UCLA Graduate Research Slam - March 2018

Podium Presentation award, 18th Annual UC System-wide Bioengineering Symposium – June 2017

3rd place, Oral Presentation in Eng. Tech., Emerging Researchers National (ERN) conference - February 2017

National Science foundation Graduate Researcher Student Fellowship (GRFP) (accepted) - March 2015

National Department of Defense Science & Engineering Graduate Fellowship (NDSEG) (declined) -March 2015

Dr. Ursula Mandel Scholarship, for graduate students in fields allied or of value to the medical field- April 2014

Outstanding Engineering Physics Student for class of 2013 - May 2013

Page 3: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

SAYALI BELSARE

401 Anderson Street College Station, TX 77840 (352) 745-9977 [email protected]

OBJECTIVE: Seeking an internship in the field of biomedical sensor development

EDUCATION

University of Florida, Gainesville, Florida

Master of Science in Biomedical Engineering, May 2017 GPA: 3.89/4.0

Birla Institute of Technology and Science-Pilani, Goa, India

Bachelor of Engineering in Chemical Engineering (Hons), August 2015 GPA: 8.3/10.0

EXPERIENCE

Texas A&M University, College Station, Texas

PhD Candidate, August 2017 – Present

Developing a paper-based colorimetric sensing system for the monitoring of gestational

diabetes at the point-of-care

Synthesis of gold nanoparticles, conjugation of aptamers and optimization of assays

University of Florida, Gainesville, Florida

Graduate Research Assistant, January 2016 – May 2017

Targeting, isolation and release of exosomes using magnetic nanoparticles

Synthesis of magnetic nanoparticles, conjugation of aptamers, and optimization of isolation

Vanderbilt University, Nashville, TN

Undergraduate Research Assistant, May 2014 – December 2014

Characterization of conditions for the isolation of magnetic nanoparticles from a continuous

flow in a microfluidic device

Synthesis of magnetic nanoparticles, fabrication of microfluidic devices

Birla Institute of Technology and Science - Pilani, Goa, India

Undergraduate Research Assistant, August 2012 – April 2013

Synthesis and characterization of hydroxyapatite nanoparticles

Century Rayon, Mumbai, India

Undergraduate Worker, May 2013 – July 2013

Study of the Spin Bath department and capacity balancing for plant expansion

SKILLS

Soft and photo lithography

Nanoparticle characterization techniques (DLS, NTA, DMS, SQuID, UV-Vis spectroscopy)

Flow cytometry, Fluorescence Microscopy, Confocal microscopy

Foreign Languages: Marathi, Hindi

Also familiar with C, C++, MATLAB, ChemCAD, AutoCAD

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

Indian Graduate Student Association, Vice President of Mentoring (September 2018 – present)

SPIE (Society for Optics and Photonics) TAMU Chapter, Outreach Chair (December 2018 – present)

Biomedical Engineering Society UF Chapter, Member (September 2015 – December 2016)

Society for Biomaterials UF Chapter, Member (September 2015 – December 2016)

HONORS

Academic Achievement Award – University of Florida (August 2015 – December 2016)

Page 4: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

TANANANT BOONYA-ANANTA

10899 SW 4th St. Apt 307 Miami, Florida 33174 (805) 377-8689 [email protected]

OBEJECTIVE: In search of an internship opportunity in Optics/Biomedical field, currently completing

doctorate degree in Biomedical Engineering at Florida International University.

EDUCATION Florida International University, Miami, FL

Doctor of Philosophy in Biomedical Engineering, January 2018 -- Present

Cumulative GPA: 3.92

California Polytechnic State University, San Luis Obispo, CA Master of Science in Mechanical Engineering, December 2017

Cumulative GPR: 3.90/4.0

Bachelor of Science in Mechanical Engineering, December 2017 Cumulative GPR: 3.72/4.0

EXPERIENCE

Medical Photonics Laboratory, Miami, Florida Research Assistant, January 2018 – Present

PATHS-UP Fellow working on wearable technologies for the underserved population

Monte Carlo light simulation with various biological configuration

Optical techniques and instrumentation

Keysight Technologies, Santa Clara, California Mechanical Engineering Intern, June 2015 – December 2015

Design/Assemble/Test new end effector tool for production implementation

High tolerances and small parts High precision application

Tooling for laser beam manipulation

Create parts for functionality and aesthetics for product test racks

Modify and assemble parts for production tools to ease day to day operations

Assist in optical fiber testing and tool design

Cal Poly Composites Lab Technician, San Luis Obispo, California Laboratory Technician, January 2017 – June 2017

Operated the Instron test machine for tensile and compressive material and fixture testing

Operate Autoclave and composite curing oven and assist other students.

Western Digital Company Limited, Ayutthaya, Thailand

Mechanical Engineering Intern, June 2013 – August 2013

Completed reconstruction of offline machines to full working condition

Diagnose issues and redesign components for components for assembly machines

Troubleshoot manufacturing line machines

Edit/Revise official SolidWorks Models and Drawings

Cal Poly Teaching Associate/ Instructor, San Luis Obispo, California Hand Drafting/Solidworks Design Class Instructor, September 2017 – December 2017

Teach a laboratory course on hand drafting fundamentals and basic Solidworks skills

Teach a laboratory course for intermediate level Solidworks 3D design and 2D technical

drawings.

SKILLS

Solidworks Design, Creo Elements/Direct Modeling, FEA, Abaqus,

Adams Multibody Dynamics, Patran Finite Element Analysis

Welding and Machining experience, Microsoft Office, MATLAB

Fluent in Thai and English

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

PATHS-UP, Student Leadership Council: VP of Workforce Development, August 2018 -

Present

SPIE Photonics West, Member, January 2019 – Present.

Page 5: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

Zheyuan (Zach) Chen

1617 Research Pkwy. Room 233 • College Station, TX 77845 • [email protected]

Highly-motivated and enthusiastic Electrical Engineering graduate. Seeking fulltime or internship position related

to nano/micro fabrication, microfluidics or biosensors.

EDUCATION

Texas A&M University, College Station, Texas Sept. 2016 – Present

Ph.D. Candidate in Electrical Engineering

Peking University (PKU), Beijing, China Jul. 2015

M.S. in Microelectronics and Solid-State Electronics

Huazhong University of Science and Technology (HUST), Wuhan, China Jul. 2012

B.E. in Material Processing and Control Engineering

EXPERIENCE

Bio and Soft MEMS Lab – Jun Kameoka, Texas A&M University

Graduate research Assistant, Mar. 2017 – Present

• Functionalized hydrogels for bio and chemical sensing

• Paper microfluidics for exosome and protein separation

• Multiplex assay and barcode processing for implantable glucose sensing

Lab of Thin Film Transistor (TFT) and Advanced Display, Peking University

Research Engineer, Jul. 2015 – Jul. 2016

• High Performance Flexible Integrated Circuits Based on IGZO TFTs

• Organic TFTs for Display and Sensors

Lab of Thin Film Transistor (TFT) and Advanced Display, Peking University

Graduate research Assistant, Sept. 2012 – Jul. 2015

• Discussed the conductive theory and the origin of p-type characteristics of copper oxides, successfully

fabricated p-type CuxO TFTs by DC sputter at room temperature and studied their performance

• High Performance Flexible Integrated Circuits Based on IGZO TFTs

• Conducted AMPS simulation on Cu2O/a-Si/ZnO solar cells structure

ASE Assembly and Test (Shanghai) Co., Ltd., Shanghai

Interned Process Engineer, Jul. 2011 – Aug. 2011

• In-depth studied in production lines such as die/wire bonding and compound packaging

• As a team leader, worked on the practical production problem referring to the tendency of warpage

occurring in Intel chips by studying the influence of composition and compound CTE by ANSYS

simulation and experiments.

SKILLS

Micro/Nano Fabrication Techniques:

● Photolithography, Sputtering, RIE, CVD, Focus Ion Beam, Anodizing System, Spin-coating, etc.

Testing and Characterization Instruments:

● Hall Effect Measurement System, XRD, SEM, AFM, Step Profiler, Semiconductor Analysis System (Agilent

B1500A), etc.

EDA/CAD Tools and Scientific Softwares:

● Auto CAD, Jade, Origin, COMSOL, SPICE, FDTD, AMPS, Matlab, Altium Designer, etc.

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

Graduate Student Union of Electrical and Computer Engineering, Vice President, May. 2013 – May. 2014 Soccer Team of Department of Electrical and Computer Engineering, Captain, Mar. 2013 – Apr. 2014

Youth Volunteer Association, President, Dec. 2009 – Dec. 2010

Page 6: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

LYDIA COLVIN

904 University Oaks Blvd Apt 112 • College Station, 77840 • (803) 487-6207 • [email protected]

Seeking an internship related to biomedical engineering.

EDUCATION

Texas A&M University, College Station, Texas

Doctor of Philosophy in Biomedical Engineering, May 2021

GPA: 4.0/4.0

University of South Carolina, Columbia, South Carolina

Bachelor of Science in Biomedical Engineering/Minor in Mathematics, May 2016

GPA: 3.72/4.0

EXPERIENCE

Texas A&M University, College Station, Texas

Graduate Research Assistant, August 2016 – Present

• Improved design of a FRET-based, competitive binding assay for glucose biosensing by

increasing its compatibility with in vivo sensing techniques.

• Advanced the encapsulation technique of the assay solution into hollow hydrogel housings for

eventual implantation purposes.

• Designed and built a benchtop optics setup to test the glucose biosensor and have conducted

further work to miniaturize this system into a wearable device.

University of Edinburgh, Edinburgh, Scotland

Visiting Research Student, June 2019 – August 2019

• Collaborated with the School of Chemistry to improve the synthesis of the sensing assay with

NIR fluorescent dyes via reductive amination.

• Experimented on methods to alter the assay to prevent leaching through the hydrogel’s mesh

membrane.

University of South Carolina, Columbia, South Carolina

Undergraduate Researcher, May 2015 – August 2015

• Identified novel techniques for improving laser spectroscopy.

• Created a HeNe laser setup to compare the experimental and expected results.

SKILLS

Software: MatLab, LabVIEW, GraphPad, Origin, familiar with Zemax.

Characterization: Performance liquid chromatography (HPLC), matrix assisted laser desorption

(MALDI), liquid chromatography-mass spectrometry (LC-MS), UV-Vis spectroscopy.

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

SPIE Student Organization, Web Master, January 2019 - present

Member, August 2016 – present

American Association of Univ. Women Student Org, Member, August 2017 – present

Vice President, May 2018 – May 2019

Academy of Future Faculty, Member, August 2017 – May 2019

G.R.A.D. Aggies Professional Development Program, Member, August 2016 – May 2019

HONORS

Engineering Graduate Diversity Fellowship, August 2016 – May 2017

Graduate Enhancement Fellowship, August 2016 – May 2017

Palmetto Fellows Scholarship, August 2012 – May 2016

Page 7: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

JESSE FINE

811 Harvey Rd Apt 147 College Station, TX, 77840 (516)780-2341 [email protected]

Ambitious PhD student seeking internship opportunity in research & development and device design

EDUCATION Texas A&M University (TAMU), College Station, Texas

Doctor of Philosophy in Biomedical Engineering, Est. May 2022 GPA: 3.5/4.0

The Ohio State University (OSU), Columbus, OH Bachelor of Science in Biomedical Engineering with Research Distinction, May 2018

GPA: 3.25/4.0 EXPERIENCE Optical Biosensing Lab & Biosensing Systems and Materials Lab, TAMU, College Station, TX

PATHS-UP Fellow, August 2018 – Present Lead project developing Monte Carlo models for photon transport through turbid media Experimentally validate Monte Carlo models

Nano Medicine Lab, The Ohio State University, Columbus, OH Undergraduate Researcher, March 2017– June 2018

Independently complete simulations, device design, microfabrication, and testing for microdevice designed for velocity dependent cell-capture

Authored undergraduate dissertation Nano-biomaterials, Robotics, and Brain Health Lab, The Ohio State University, Columbus, OH

Undergraduate Researcher, May 2015 – February 2017 Operated Atomic Force Microscopy and Digital Holographic Microscopy to analyze and

characterize biomarker morphology Utilized MATLAB to analyze Kalman Filter stochastic prediction capability

Assurex Health, A Myriad Genetics Company Research & Development Intern, May 2016-August 2016

Independently created a methodology to discover novel single nucleotide polymorphisms in eQTL that co-regulate glucuronosyltransferase with respect to Linkage Disequilibrium

SKILLS COMSOL, ImageJ, JMP, MATLAB, Microsoft Office, Microscopy, Monte Carlo Modeling, Photolithography, Python, Solidworks PROFESSIONAL ORGANIZATIONS & ACTIVITIES

PATHS-UP Eng. Research Center, Student Leadership Council President, October 2018-Present Biomedical Eng. Graduate Student Association, Class Representative, October 2018-Present Biomedical Eng. Society at Ohio State, President, February 2016-May 2018 American Society for Eng. Education, BED Member, March 2017 – March 2018

HONORS

Precise, Advanced Technologies for Underserved Populations Fellowship, August 2018-Present Biomedical Engineering Society Student Travel Award, October 2018 TAMU Biomedical Engineering Graduate Enhancement Fellowship Award, August 2018 OSU Department of Biomedical Engineering Richard T. Hart Leadership Award, April 2018 OSU Department of Biomedical Engineering Service Award, April 2018 3rd Place- OSU Denman Research Forum, April 2018

Page 8: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

ANDRES J. RODRIGUEZ

15429 SW 9th TER Miami, FL 33194 (786) 416-1752 [email protected]

Currently seeking co/op or internship opportunity to collaborate on medical project design and translation into market

EDUCATION

Florida International University, Miami, Florida Doctor of Philosophy in Biomedical Engineering, January 2022

GPA: 3.52/4.0

Florida International University, Miami, Florida Bachelor of Science in Biomedical Engineering, December 2017

GPA: 3.65/4.0

EXPERIENCE

Medical Photonics Laboratory (MPL), Miami, Florida Research Fellow, January 2018 – Present

Constructed a Spatial Frequency Domain Imaging System (SFDI) to be used in clinical testbed to study

skin of the obese

Simulated Monte Carlo transport of photons in a 5-layer medium of obese skin – Oral Presentation at SPIE

conference

Managed and taught students to design and build a portable NIRS muscle oximeter and Blood Pressure

monitoring device

Built imaging systems, interferometers, spectrometers, and determined optical properties of materials with

an integrating sphere

Tissue Engineered Mechanics, Imaging and Materials Laboratory (TEMIM), Miami, Florida Research Assistant, May 2017 – July 2018

Presented mechanical testing results of porcine small intestinal submucosa scaffolds at the 8th World

Congress of Biomechanics

SolidWorks design of bioreactor components and calibration of ViVitro pulsatile pump to integrate with

cell-cultured tissues

Administered mechanical accelerated life and fatigue tests on tissue engineered PSIS scaffolds using an

electro-force actuator

Co-authored manuscript (in review)

C-Scope: A Polarized Low-Cost Portable Colposcope, Miami, FloridaInformation Officer, January 2017 – December 2017

Led prototyping of a low-cost portable polarimetry colposcope for capturing images to be used for early

cancer detection

Documented and developed the design and verification processes for a device history file and master

record using GMPs

Established the LAN network and infrastructure using Linux based microprocessor cluster

21st Century Engineering, Miami, Florida Project Coordinator, January 2015 – July 2016

Drafted AutoCAD computer software blueprints and worked on site plans for street and utility design

projects

Strengthened my attention to details, additions, and legalizations of projects by reviewing industry

standards

Executed copies and plots of projects’ drawings by communicating with a 3rd party printing company

SKILLS Excellent communication and writing skills: Bilingual in English and Spanish

PC/MAC/Linux literate, Python, MATLAB, Statistical Software, Multisim, Mathematica, Arduino, Raspberry Pi

AutoCAD, SolidWorks, 3D Printing, PCB Circuit Design, Machine Shop, IRB, IACUC, HIPPA, Start-Up FIU

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

PATHS-UP (Student Leadership Council), VP of Innovation Ecosystem, October 2018 – Present

AEMB Honor Society, Executive Board Member - Secretary, January 2018 – December 2019

SPIE, Student Member, January 2019 – January 2020

HONORS

Senior Design Competition (1st Place), January 2017 – December 2017

Page 9: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

Cyril Soliman

3600A Western St. • Bryan, TX 77802 • (661) 733-1982 • [email protected]

Seeking internship opportunities within the field of optics and medical imaging.

EDUCATION

Texas A&M University (TAMU), College Station, Texas

Doctor of Philosophy in Biomedical Engineering, Present

Cumulative GPR: 4.0

University of California Irvine (UCI), Irvine, California

Bachelor of Science in Biomedical Engineering, June 2017

Cumulative GPR: 3.1; Major GPR: 3.2

EXPERIENCE

Optics Laboratory – Dr. Gerard Cote and Dr. Kristen Maitland, Texas A&M University

Graduate Researcher, August 2017 – Present

• Developing optical systems to improve healthcare diagnostics, primarily for use at the point-of -care.

• Designed multi-modal optical system to detect changes in Raman and fluorescence in a compact, low

cost handheld unit.

• Develop waveguide platform for fluorescence and Raman spectroscopy.

Microbiomechanics Laboratory – Dr. William Tang, University of California, Irvine

Undergraduate Researcher, October 2014 – January 2016

• Designed pizo-electric nanopillars to gauge cellular differentiation and motility of cancer cells.

• Designed micro-vessels to characterize cancer cell metastatic pathways.

• Designed a malaria detection platform interfacing aptamers and electrical transduction circuitry.

Microbiology Laboratory – Dr. Luis Mota-Bravo, University of California, Irvine

Undergraduate Researcher, April 2014 – October 2014

• Tracking the development of bacterial antibiotic resistance in major bodies of water across Orange

County, California.

• Field work included collecting water samples, culturing bacteria, analyzing DNA to correlate gene

expression with antibiotic resistance and characterizing the antibiotic resistance profiles and patterns of

spreading.

SKILLS

SolidWorks, Zemax, MATLAB, LabVIEW

Languages: Arabic

PROFESSIONAL ORGANIZATIONS

SPIE, Treasurer, January 2018 – Present

HONORS

UCI Applied Innovation TechSurge Incubator Award, June 2017

UCI Undergraduate Research Opportunities Program Funding Recipient, November 2014- December 2016

Annual Biomedical Research Conference for Minority Students (ABRCMS), September 2014

Poster Presentation Award Recipient

NIH- Minority Biomedical Research Support (MBRS)/ Initiative of Maximizing , April 2014

Student Development (IMSD) Grant Recipient

Page 10: PhD-Internship...Seeking full-time or part-time position post-graduation in the field of diagnostics and data science. EDUCATION University of California Los Angeles, Los Angeles,

Karim Zahed 105 Maple Ave College Station, TX 77845 (214)-606-9983 [email protected]

Highly motivated Ph.D. student in Human Factors Engineering seeking an internship position

EDUCATION

Texas A&M University, College Station, Texas Ph.D. in Industrial and Systems Engineering, May 2021

GPA: 4.0/4.0

Texas A&M University, College Station, Texas Masters of Engineering in Industrial and Systems Engineering, May 2017

GPA: 3.8/4.0

American University of Beirut, Beirut, Lebanon

Bachelor of Engineering in Electrical and Computer Engineering, June 2013

GPA: 3.8/4.0

EXPERIENCE

Future Pipe Industries Inc., Houston, TX

Industrial Engineering Intern, 05/2016 – 08/2016

Learned how to utilize MRP and ERP in scheduling and production planning

Developed a process improvement project that increased daily pipe production by 17%

Reallocated the layout to a more continuous flow projected to increase annual capacity by 5%

Bayanat Airport Engineering and Supplies, Abu Dhabi, UAE

Project Engineer, 11/2013 - 08/2015

Reviewed quotes, issued purchase orders, allocated resources, and prepared project schedules

Performed design and cost analysis for a project which reduced its allocated costs by 10%

Acquired design & installation concepts, time management essentials, and communicated

requirements with stakeholders

European Broadcasting Union, Geneva, Switzerland

R&D Intern, 07/2013 - 08/2013

Optimized a field strength prediction function and performed Monte Carlo simulations on

MATLAB to assess the uncertainty of interference from mobile user equipment on the

reception of digital television

Product Development Department at MPR Associates Inc., Alexandria, VA

Intern, 08/2012 - 09/2012

Designed parts in the workshop, performed observations on ongoing testing, and built

experiment fixtures

University of Wisconsin Madison, Madison, WI

Visiting Undergraduate Researcher, 06/2012 - 08/2012

Analyzed data from an intracranial pressure sensor prototype to detect the effect of certain

parameters on its sensitivity

SKILLS

R, Matlab, AMPL, SIMIO, SQL,

Fluent in English and Arabic, Fair in French, Beginner in Spanish

PROFESSIONAL ORGANIZATIONS & ACTIVITIES

Human Factors & Ergonomics Society, Member, 08/2017- Present

Arab Students Association, President, Texas A&M University, 10/2016-08/2017

“Outlook” Weekly Newspaper, Staff Writer, American University of Beirut, 09/2011-06/2012

HONORS

New Graduate Student Scholarship, Texas A&M University 09/2015 - 05/2017

All time standing on Dean’s Honor List, American University of Beirut, 09/2009 - 06/2013