phoenix gold 2012

PG

CAT

12

Table of ContentsELITE Series ....................................................................................................................................................................4 ELITEAmplifiers ...................................................................................................................................................... 6-7 ELITESubwoofers .......................................................................................................................................................8 ELITESpeakers ...........................................................................................................................................................9

Amplifiers .......................................................................................................................................................................10 THE ONE ............................................................................................................................................................ 12-13 Ti-Series .............................................................................................................................................................. 14-23 SD-Series ............................................................................................................................................................ 24-37 R-Series .............................................................................................................................................................. 38-47

OEM Integrated System Kit ..........................................................................................................................................48 IntegratedSeries ................................................................................................................................................. 48-51

Subwoofers ....................................................................................................................................................................52 R-VENT ............................................................................................................................................................... 54-55 Ti2-Series ............................................................................................................................................................ 56-57 SL-Series ............................................................................................................................................................ 58-59 R3-Series ............................................................................................................................................................ 60-61 R1-Series ............................................................................................................................................................ 62-63

Speakers ........................................................................................................................................................................64 Ti-Series .............................................................................................................................................................. 66-67 R-Series .............................................................................................................................................................. 68-69

Accessories ............................................................................................................................................................. 70-73Promotional Items .........................................................................................................................................................74

Introduction

Phoenix Gold is a premier manufacturer of high-end mobile audio products, featuring award winning amplifiers, speakers, processors and subwoofers for audiophiles who are serious about the sound of their music. Since 1985, Phoenix Gold has dared to be different, never afraid to take chances with product design, engineering and innovation. 2012 is no different, Phoenix Gold is constantly exploring new technologies, driven to elevate the standard of excellence. We proudly introduce the Elite series which provides the highest performance in mobile audio today. In addition, the ultra popular and small SD amplifier series has expanded further to include two 1300 watt models that will fit just about anywhere. Never before has so much power been available in such a small package.

For decades, Phoenix Gold has been one of the most respected and well known manufacturers of high-end mobile audio products. Today, every Phoenix Gold component upholds the legacy, incorporating unique technologies that are the direct result of ongoing innovation. In this tradition, we are proud to present our 2012 catalog of products. This catalog is the result of a continued dedication to our key values of performance, innovative, quality, and excellence.

Building the legend everyday…Phoenix Gold Team

5

Want the best in mobile sound? You just found it.

The Elite amplifiers feature only the finest in audio components such as Burr Brown op-amps, Monolithic signal capacitors, and dual-package Sanken output transistors. This result is unparalleled sonic performance in a mobile audio amplifier. The sheer breadth of the Elite amplifiers’ dynamic range conveys a musical realism that transcends standard amplifier designs. With seemingly unlimited frequency response and smashing dynamic range the end result is the finest sounding amplifier Phoenix Gold has ever built, period. Oh yeah, they are also built like a brick house and drive low impedance loads without breaking a sweat.

The Elite.65cs features a pure 25mm silk dome tweeter that resides in an anodized aluminum housing that has been CNC’d from a single block of raw aluminum. The tweeter and midrange has been specifically engineered with complex FEA analysis that perfectly optimizes the motor structures. The overall result is ultra smooth, linear musical output with excellent spectral clarity without delivering overly bright or fatiguing high frequencies commonly found in most car audio component systems. The 6.5” midrange also features a dual roll surround that eliminates unwanted resonances, acoustical artifacts and dampens mechanical vibrations. The Elite speaker system provides breathtaking dynamic range and jaw dropping musical realism for true audiophiles.

The Elite.12d features 60mm of peak to peak excursion, this single woofer has the ability to move as much air as three normal 12 inch drivers. This monster’s 3.0” voice coil is engineered with a vented Titanium/Aluminum Hybrid former that is extremely light, rigid and capable of handling 1600w RMS/3200w peak. The dual spider system keeps the ultra long voice coil centered to eliminate any motor vibrations and losses. It also provides the perfect mechanical force for the moving assembly of the cone and voice coil, so the end result is smooth effortless output even during massive excursion or extreme power. Just like the component system, FEA optimization allows the motor force to remain consistent over a wide range of power and excursion levels. Whether you want to hear intricate bass notes or deliver massive wind shield shattering dynamic output, the Elite.12d is over-built and over-engineered to get the job more than done.

6

Features:• Class D Topology• Overbuilt Quad Unregulated Power Supplies• Handwound Power Supply Transformers• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• High Temperature Plexiglass Cover• RMD - Remote Voltage Display Ready (pg. 73)• Remote Level Control with Clip Indicator Included• Linkable or strappable to an additional Elite.1 • Audio Precision Quality Control Verification• Power Output Birth Certificate • 23.3” L x 10.5” W x 2.6” H

Specifications:Power Rating .........................3200 Watts x 1 Channel / 1 Ohm.............................................. 2400 Watts x 1 Channel / 2 Ohms

Low Pass Range................................................. 30Hz to 300HzLow Pass Slope .....................................................24dB/OctaveSubsonic Range ................................................... 10Hz to 55HzSubsonic Filter Slope ............................................24dB/OctaveBass Boost ............................................................... 0 to +18dBPower Terminal .................................................................1/0GAFrequency Response .......................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ...................................Greater than 100dBEfficiency .............................................................................85%Damping Factor ............................................... Greater than 200Heatsink Thermal Mass ..................................13 grams per mm

Features:• Class A/B Topology• Burr Brown Operational Amplifiers• Monolithic Signal Capacitors• Massive Dual Package Sanken Output Devices• Overbuilt Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Triple Darlington Output Stage• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• User Adjustable Temperature Controlled Fan Cooling System• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• High Temperature Plexiglass Cover• RMD - Remote Voltage Display Ready (pg. 73)• Remote Level Control with Clip Indicator Included• Audio Precision Quality Control Verification• Power Output Birth Certificate • 23.3” L x 10.5” W x 2.6” H

Specifications:Power Rating ........................... 500 Watts x 2 Channel / 1 Ohm*.................................................400 Watts x 2 Channel / 2 Ohms.................................................250 Watts x 4 Channel / 4 OhmsLow Pass Range....................................................40Hz to 4kHzLow Pass Slope ..................................................... 18dB/OctaveHigh Pass Filter Range ..........................................20Hz to 4kHzHigh Pass Filter Slope ........................................... 18dB/OctavePower Terminal ................................................................. 1/0GAFrequency Response ...........................10Hz to 50kHz (+/- 1dB)Signal to Noise Ratio ................................... Greater than 110dBEfficiency ............................................................................. 55%Damping Factor ................................................Greater than 200Heatsink Thermal Mass .................................. 13 grams per mm......................................................*Reactive Load Measurement

Features:• Class A/B Topology• Burr Brown Operational Amplifiers• Monolithic Signal Capacitors• Massive Dual Package Sanken Output Devices• Overbuilt Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Triple Darlington Output Stage• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• User Adjustable Temperature Controlled Fan Cooling System• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• High Temperature Plexiglass Cover• RMD - Remote Voltage Display Ready (pg. 73)• Remote Level Control with Clip Indicator Included• Audio Precision Quality Control Verification• Power Output Birth Certificate • 23.3” L x 10.5” W x 2.6” H

Specifications:Power Rating ........................... 300 Watts x 4 Channel / 1 Ohm*.................................................250 Watts x 4 Channel / 2 Ohms.................................................150 Watts x 4 Channel / 4 OhmsLow Pass Range....................................................40Hz to 4kHzLow Pass Slope ..................................................... 18dB/OctaveHigh Pass Filter Range ..........................................20Hz to 4kHzHigh Pass Filter Slope ........................................... 18dB/OctavePower Terminal ................................................................. 1/0GAFrequency Response ...........................10Hz to 50kHz (+/- 1dB)Signal to Noise Ratio ................................... Greater than 110dBEfficiency ............................................................................. 55%Damping Factor ................................................Greater than 200Heatsink Thermal Mass .................................. 13 grams per mm......................................................*Reactive Load Measurement

| Amplifiers

ELITE.1 - Mono-Block Amplifier ELITE.2 - 2 Channel Amplifier ELITE.4 - 4 Channel Amplifier

7

Amplifiers |

ELITE.4 - 4 Channel Amplifier

ELITE.1 - Mono-Block Amplifier ELITE.2 - 2 Channel Amplifier ELITE.4 - 4 Channel Amplifier

| Subwoofers

8

Features:• 60mm of Peak to Peak Excursion• Dual 4 Ohms Voice Coil Model• 3.0” Premium OFC Copper Wound Voice Coil• Dual Long Throw Spider Suspension• Woven Tinsel Leads• Composite Material Hybrid Cone• High Excursion CAE/CAD Motor Design• Vented Titanium-Aluminum Hybrid Former• One Piece Aluminum Plated Dustcap with Tri-Blue LEDs• High Roll Butyl Rubber Surround• Nickel Plated 12 Gauge Speaker Terminal• Optimized for Sealed or Vented Enclosures• Rigid Powder Coated Anti-Resonant Castbasket

Specifications:Power Handling ...............................1600w RMS - 3200w PEAKImpedance ..............................................................Dual 4 OhmsFrequency Response .............................................. 20 to 300Hz

ELITE.12d - 12 inch High Excursion Subwoofer

Speakers |

9

Features:• 25mm Silk Dome Tweeter• Fully Machined Aluminum Tweeter Housing• Dampened Polypropylene Cone• Smooth Termination Dual Roll Rubber Surround• Powder Coated Diecast Aluminum Basket• Custom Tooled Crossover Housing with Direct Insert Wiring Connections• 24dB External Audiophile Crossover with Tweeter Level Adjustment• Two Stage Light Bulb Tweeter Protection Circuitry• Integrated Phase Plug• Interwoven Tinsel Leads• High Temperature CAE/CAD Motor Structure

Specifications:Power Handling ...................................150w RMS - 300w PEAKImpedance ...................................................................... 4 OhmsFrequency Response ..........................................50Hz to 20kHz

ELITE.65cs - Component Speakers

11

For nearly three decades, Phoenix Gold has earned the distinguished reputation for engineering and design excellence of mobile audio amplifiers. Our world class engineering and R/D teams continue to create amplifiers that are more powerful, more efficient and more convenient to integrate into OEM systems. All while maintaining the ultimate goal, the sonic excellence of reproducing your music exactly as it was intended. Over the years, Phoenix Gold has been used as the benchmark for mobile audio amplifiers due to their legacy of unparalleled sound quality. Today, the Phoenix Gold product line is diverse with multiple applications, but it’s fundamental engineering and design goals of uncompromising performance remain unchanged.

Amplifers

THE ONE12,000w Monoblock Amplifier - LimitedEdition

12

13

THE ONE pushes the rich tradition of limited edition amplifiers to a new level. This is the most powerful amplifier Phoenix Gold has ever built, 12,000 watts RMS into a single channel. Part beast, part piece of artwork the massive internal components are visible for all to see via the plexiglass cover. Each amplifier is truly unique as the limited edition unit number is laser cut into the heatsink, so no two amplifiers are alike. Limited quantities available.

Features:• 12,000w x 1 @ 1 Ohm• 8,000w x 1 @ 2 Ohms• Limited Edition Production Run• 3 Ounce Gold Plated Circuit Board• Six Internal Power Supplies with Hand Wound Transformers• Temperature Controlled Fan Cooling System• High Efficiency Class D Topology• 24dB Detented Low Pass and Subsonic Filters• Operates up to 16 Volts DC • Two amps are linkable for 24,000w

Specifications:Power Rating .................................. 12,000 Watts x 1 Channel / 1 Ohm

8,000 Watts x 1 Channel / 2 OhmsLow Pass Filter ................................................................30Hz to 300HzLow Pass Filter Slope ........................................................ 24dB/OctaveSubsonic Filter Range .......................................................10Hz to 55HzBass Boost ........................................................................... +0 to +6dBDimensions ............................................................... 12”W x 3”H x 37”L

Ti SeriesTi2500.1 - 2500w Mono-Block Amplifier

Ti Series. These amplifiers are designed and built to the same standards that made Phoenix Gold a legend of the industry. As true competition level amplifiers they are intentionally overbuilt for maximum performance with dual unregulated power supplies, hand wound power supply transformers, and heavy duty aluminum heat sinks.

14

15

Ti Series Ti2500.1 - 2500w Mono-Block Amplifier

Features:• Class D Topology• Overbuilt Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• RMD - Remote Voltage Display Ready (see pg. 73)• LPL44 Low Pass Level Control Ready (see pg. 73)• Audio Precision Quality Control Verification• 20.4” L x 9.8” W x 2.5” H

Specifications:Power Rating .................................... 2500 Watts x 1 Channel / 1 Ohms.......................................................... 1500 Watts x 1 Channel / 2 Ohms

Low Pass Range .............................................................30Hz to 300HzLow Pass Slope ................................................................. 24dB/OctaveSubsonic Range ................................................................10Hz to 55HzSubsonic Filter Slope ........................................................ 24dB/OctaveBass Boost ........................................................................... 0 to +18dBPower Terminal ............................................................................. 1/0GAFrequency Response ...................................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio .................................................Greater than 90dBTotal Harmonic Distortion ................................................ Less than .1%Efficiency .........................................................................................80%Damping Factor ........................................................... Greater than 200Heatsink Thermal Mass ...........................................10.5 grams per mm

• Panel mounted RCA connections for maximum signal transfer and reliability

• Precision aluminum shaft potentiometers with 41 dents for exact crossover frequency selection

• Linkable or strappable to another monoblock for double the power output

• High current direct insert power and speaker terminals

16


17


Features:• Class D Topology• Overbuilt Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• RMD - Remote Voltage Display Ready (see pg. 73)• LPL44 Low Pass Level Control Ready (see pg. 73)• Audio Precision Quality Control Verification • 16.8” L x 9.8” W x 2.5” H

Specifications:Power Rating ...................................... 1500 Watts x 1 Channel / 1 Ohm...........................................................1100 Watts x 1 Channel / 2 Ohms

Low Pass Range .............................................................30Hz to 300HzLow Pass Slope ................................................................. 24dB/OctaveSubsonic Range ................................................................10Hz to 55HzSubsonic Filter Slope ........................................................ 24dB/OctaveBass Boost ............................................................................0 to +18dBPower Terminal ............................................................................. 1/0GAFrequency Response .......................................20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio .................................................Greater than 90dBTotal Harmonic Distortion ............................................. Less than .1%Efficiency ........................................................................................ 80%Damping Factor ............................................................Greater than 200Heatsink Thermal Mass ........................................... 10.5 grams per mm



• Linkable or strappable to another monoblock for double the power output


18

Ti SeriesTi800.4 - 800w 4 Channel Amplifier

19


Features:• Class A/B Topology• Overbuilt Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Triple Darlington Output Stage• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Temperature Controlled Dual Fan Cooling System• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• RMD - Remote Voltage Display Ready (see pg. 73)• LPL44 Low Pass Level Control Ready (see pg. 73)• Audio Precision Quality Control Verification• 20.4” L x 9.8” W x 2.5” H

Specifications:Power Rating ......................................200 Watts x 4 Channel / 2 Ohms............................................................125 Watts x 4 Channel / 4 Ohms

Low Pass Range ............................................................40Hz to 400HzLow Pass Slope ................................................................ 18dB/OctaveHigh Pass Filter Range ...................................................20Hz to 400HzHigh Pass Filter Slope ...................................................... 18dB/OctaveBass Boost ...........................................................................0 to +18dBPower Terminal ............................................................................ 1/0GAFrequency Response ......................................20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio .............................................. Greater than 110dBTotal Harmonic Distortion ..............................................Less than .01%Efficiency ........................................................................................ 50%Damping Factor ...........................................................Greater than 200Heatsink Thermal Mass .......................................... 10.5 grams per mm




20


21


Features:• Class A/B Topology• Overbuilt Unregulated Power Supply• Handwound Power Supply Transformers• Triple Darlington Output Stage• Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Temperature Controlled Dual Fan Cooling System• Integrated Cooling via Endcap Vents• Each Amp is Shipped in its Own Soft Felt Protective Cover• RMD - Remote Voltage Display Ready (see pg. 73)• LPL44 Low Pass Level Control Ready (see pg. 73)• Audio Precision Quality Control Verification• 16.8” L x 9.8” W x 2.5” H

Specifications:Power Rating ....................................150 Watts x 4 Channel / 2 Ohms...........................................................100 Watts x 4 Channel / 4 Ohms

Low Pass Range ........................................................... 40Hz to 400HzLow Pass Slope ................................................................18dB/OctaveHigh Pass Filter Range .................................................. 20Hz to 400HzHigh Pass Filter Slope ......................................................18dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................1/0GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ............................................. Greater than 110dBTotal Harmonic Distortion .............................................Less than .01%Efficiency ....................................................................................... 50%Damping Factor ..........................................................Greater than 200Heatsink Thermal Mass ..........................................10.5 grams per mm




22


23


Features:• Class A/B Topology for Front/Rear Channels• Class D Topology for Subwoofer Channel• Dual Unregulated Power Supplies• Handwound Power Supply Transformers• Triple Darlington Output Stage for Front/Rear Channels • Isolated Pre-Amp Section• Crossovers have 41 Detents for Exact Frequency Selection• Aluminum Shaft Potentiometers• Panel Mounted RCAs• Clip Indicators• Extruded Aluminum Heatsink with Evenflow Technology• Temperature Controlled Dual Fan Cooling System• Integrated Cooling via Endcap Vents• Shipped in Soft Felt Protective Cover• RMD - Remote Voltage Display Ready (see pg. 73)• LPL44 Low Pass Level Control Ready (see pg. 73) • Audio Precision Quality Control Verification • 28.2” L x 9.8” W x 2.5” H

Specifications:Power Rating .................................... 150 Watts x 4 Channel / 2 Ohms........................................................... 100 Watts x 4 Channel / 4 Ohms............................................................750 watts x 1 Channel / 2 Ohms............................................................1000 watts x 1 Channel / 1 Ohm

Sub Low Pass Range ....................................................30Hz to 300HzLow Pass Slope ............................................................... 24dB/OctaveFront High Pass Filter Range ...........................................40Hz to 4kHzHigh Pass Filter Slope ..................................................... 18dB/OctaveRear High, Band and Low Pass Filter Range ..................40Hz to 4kHzHigh Pass Filter Slope ..................................................... 18dB/OctaveBass Boost ......................................................................... 0 to +18dBPower Terminal ........................................................................... 1/0GAFrequency Response .................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio .............................................Greater than 110dB Total Harmonic Distortion ............................................ Less than .01%Efficiency .................................................. 50% Front/Rear - 80% SubDamping Factor ......................................................... Greater than 200Heatsink Thermal Mass .........................................10.5 grams per mm




SD SeriesSD1300.1 - 1300w Mono-Block Amplifier

SD Series. SD Amplifiers are the newest creation from the engineering gurus at Phoenix Gold. These amplifiers are ultra compact, so they can be mounted just about anywhere. But don’t be fooled by their small size as these amplifiers deliver serious power output. The PG gurus have created a full-range Class D topology that seamlessly delivers outstanding sound quality that even the most sensitive of ears will enjoy. The Class D design is also ultra efficient. This means lower operating temperatures and less strain on the vehicle’s electrical system. The SD amplifiers are the perfect balance of power, size and affordability.

24

25


Features:• Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• Temperature Controlled Fan Cooling System• RMD - Remote Voltage Display Ready (see pg. 73)• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover• 15.0” L x 6.9” W x 2.0” H

Specifications:Power Rating ..................................... 1300 Watts x 1 Channel / 1 Ohm........................................................... 900 Watts x 1 Channel / 2 OhmsLow Pass Range ............................................................30Hz to 300HzLow Pass Slope ................................................................ 12dB/OctaveSubsonic Range ...............................................................10Hz to 55HzSubsonic Filter Slope ....................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ................................................Greater than 90dBTotal Harmonic Distortion ............................................... Less than .1%Efficiency ........................................................................................70%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................5.0 grams per mm

• Panel mounted RCA signal connections for maximum signal transfer and reliability• Temperature Controlled Fan Cooling System

• Optional RMD allows amplifier voltage to be monitored anywhere in the vehicle• High current direct insert power and speaker terminals

26


26

27


Features:• Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover • 10.1” L x 6.9” W x 2.0” H

Specifications:Power Rating ....................................... 600 Watts x 1 Channel / 1 Ohm........................................................... 400 Watts x 1 Channel / 2 Ohms

Low Pass Range ............................................................30Hz to 300HzLow Pass Slope ............................................................... 12dB/OctaveSubsonic Range ..............................................................10Hz to 55HzSubsonic Filter Slope ....................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio ................................................Greater than 90dB Total Harmonic Distortion ............................................... Less than .1% Efficiency ........................................................................................70% Damping Factor .......................................................... Greater than 200 Heatsink Thermal Mass ............................................5.0 grams per mm

• Panel mounted RCA signal connections for maximum signal transfer and reliability


28


29


Features:• Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover • 7.4” L x 6.9” W x 2.0” H

Specifications:Power Rating ..................................... 300 Watts x 1 Channel / 2 Ohms........................................................... 200 Watts x 1 Channel / 4 OhmsLow Pass Range ............................................................30Hz to 300HzLow Pass Slope ................................................................ 12dB/OctaveSubsonic Range ...............................................................10Hz to 55HzSubsonic Filter Slope ....................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ................................................Greater than 90dBTotal Harmonic Distortion ............................................... Less than .1%Efficiency ........................................................................................70%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................5.0 grams per mm



30

SD SeriesSD200.2 - 200w 2 Channel Amplifier

31


Features:• Full Range Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• RMD - Remote Voltage Display Ready (see pg. 73)• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover • 7.4” L x 6.9” W x 2.0” H

Specifications:Power Rating ..................................... 100 Watts x 2 Channel / 2 Ohms............................................................. 75 Watts x 2 Channel / 4 OhmsLow Pass Range ............................................................40Hz to 400HzLow Pass Slope ................................................................ 12dB/OctaveHigh Pass Filter Range ...................................................40Hz to 400HzHigh Pass Filter Slope ...................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 100dBTotal Harmonic Distortion ............................................... Less than .1%Efficiency ........................................................................................70%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................5.0 grams per mm



32


33


Features:• Full Range Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• RMD - Remote Voltage Display Ready (see pg. 73)• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover • 10.6” L x 6.9” W x 2.0” H

Specifications:Power Rating .................................... 125 Watts x 4 Channel / 2 Ohms............................................................. 75 Watts x 4 Channel / 4 Ohms

Low Pass Range ............................................................40Hz to 400HzLow Pass Slope ................................................................ 12dB/OctaveHigh Pass Filter Range ...................................................40Hz to 400HzHigh Pass Filter Slope ...................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio ..............................................Greater than 100dB Total Harmonic Distortion ............................................... Less than .1% Efficiency ........................................................................................70% Damping Factor .......................................................... Greater than 200 Heatsink Thermal Mass ........................................... 5.0 grams per mm



34


35


Features:• Full Range Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• Temperature Controlled Fan Cooling System• RMD - Remote Voltage Display Ready (see pg. 73)• Panel Mounted RCAs• RBC - Remote Bass Level Control included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass cover • 15.0” L x 6.9” W x 2.0” H

Specifications:Power Rating ..................................... 125 Watts x 4 Channel / 2 Ohms............................................................. 80 Watts x 4 Channel / 4 Ohms............................................................800 watts x 1 Channel / 2 Ohms............................................................500 watts x 1 Channel / 4 OhmsSub Low Pass Range .....................................................30Hz to 300HzLow Pass Slope ................................................................ 24dB/OctaveFront/Rear High Pass Filter Range .................................15Hz to 300HzHigh Pass Filter Slope ...................................................... 12dB/OctavePower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 100dBTotal Harmonic Distortion ............................................... Less than .1%Efficiency ........................................................................................70%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................5.0 grams per mm

• Panel mounted RCA signal connections for maximum signal transfer and reliability• Temperature Controlled Fan Cooling System


36


37


Features:• Full Range Class D Topology• Compact Size for Easy Installation• Robust Unregulated Power Supply• Surface Mount Component Technology• Panel Mounted RCAs• RBC - Remote Bass Level Control Included• Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Temperature Plexiglass Cover • 12.1” L x 6.9” W x 2.0” H

Specifications:Power Rating .....................................125 Watts x 4 Channel / 2 Ohms..............................................................75 Watts x 4 Channel / 4 Ohms ............................................................ 300 watts x 1 Channel / 2 Ohms............................................................ 200 watts x 1 Channel / 4 Ohms

Sub Low Pass Range .................................................... 30Hz to 300HzLow Pass Slope ................................................................24dB/OctaveFront/Rear High Pass Filter Range ................................ 15Hz to 300HzHigh Pass Filter Slope ......................................................12dB/OctavePower Terminal ...............................................................................4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ............................................. Greater than 100dB Total Harmonic Distortion ...............................................Less than .1%Efficiency ........................................................................................ 70%Damping Factor ..........................................................Greater than 200Heatsink Thermal Mass ............................................5.0 grams per mm



R SeriesR1000.1 - 1000w Mono-Block Amplifier

R Series. The R-Series is an evolution of amplifiers, dollar per watt they provide the best bang for the buck available today. Built toughwith a heavy duty heatsink, robust unregulated power supply, oversized direct input power and speaker terminals. They also sound sweet thanksto the audiophile bi-polar output transistors. Want to upgrade your stock system without changing the head unit? No problem, the high levelinput with signal sensing turn-on makes breathing new life into your stock system simple. R-series amplifiers will power your audio system tonew levels everyday and all day without breaking the bank.

38

39


Features:• Class D Topology• Robust Unregulated Power Supply• High Level Input with Signal Sensing Turn On• LPL44 Low Pass Level Control Ready (see pg. 73)• RMD - Remote Voltage Display Ready (see pg. 73)• Oversized Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Density Extruded Aluminum Heatsink• Color Customizable Endcap Spacer • 12.7” L x 9.75” W x 2.5” H

Specifications:Power Rating .....................................1000 Watts x 1 Channel / 1 Ohm............................................................750 Watts x 1 Channel / 2 Ohms

Low Pass Range ............................................................ 30Hz to 300HzLow Pass Slope .................................................................18dB/OctaveSubsonic Range ............................................................... 10Hz to 55HzSubsonic Filter Slope ........................................................18dB/OctaveBass Boost ........................................................................... 0 to +18dBPower Terminal ................................................................................4GAFrequency Response ......................................20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ................................................ Greater than 90dBTotal Harmonic Distortion ................................................Less than .1%Efficiency ........................................................................................ 80%Damping Factor ...........................................................Greater than 200Heatsink Thermal Mass ........................................... 8.5 grams per mm

• High level input with signal sensing turn on• Optional RMD allows amplifier voltage to be monitored anywhere in the vehicle

• High current direct insert power and speaker terminals• 8.5g per MM of Heavy Duty Extruded Aluminum Heat sink

40


41


Features:• Class A/B Topology• Audiophile Bi-Polar Output Transistors• Robust Unregulated Power Supply• High Level Input with Signal Sensing Turn On• LPL44 Low Pass Level Control Ready (see pg. 73)• RMD - Remote Voltage Display Ready (see pg. 73)• Oversized Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Density Extruded Aluminum Heatsink• Color Customizable Endcap Spacer• 11.1”L x 9.75” W x 2.5” H

Specifications:Power Rating .................................... 500 Watts x 1 Channel / 2 Ohms........................................................... 300 Watts x 1 Channel / 4 Ohms

Low Pass Range ............................................................30Hz to 300HzLow Pass Slope ................................................................ 12dB/OctaveSubsonic Range ...............................................................10Hz to 55HzSubsonic Filter Slope ....................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 105dBTotal Harmonic Distortion ............................................. Less than .02%Efficiency ........................................................................................50%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................8.5 grams per mm



42


43


Features:• Class A/B Topology• Audiophile Bi-Polar Output Transistors• Robust Unregulated Power Supply• High Level Input with Signal Sensing Turn On• LPL44 Low Pass Level Control Ready (see pg. 73)• RMD - Remote Voltage Display Ready (see pg. 73)• Oversized Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Density Extruded Aluminum Heatsink• Color Customizable Endcap Spacer• 9.5” L x 9.75” W x 2.5’ H

Specifications:Power Rating ..................................... 250 Watts x 1 Channel / 2 Ohms........................................................... 150 Watts x 1 Channel / 4 Ohms

Low Pass Range ............................................................30Hz to 300HzLow Pass Slope ................................................................ 12dB/OctaveSubsonic Range ...............................................................10Hz to 55HzSubsonic Filter Slope ....................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 300Hz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 105dBTotal Harmonic Distortion ............................................. Less than .02%Efficiency ........................................................................................50%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................8.5 grams per mm



44

R SeriesR500.4 - 500w 4 Channel Amplifier

45


Features:• Class A/B Topology• Audiophile Bi-Polar Output Transistors• Robust Unregulated Power Supply• High Level Input with Signal Sensing Turn On• LPL44 Low Pass Level Control Ready (see pg. 73)• RMD - Remote Voltage Display Ready (see pg. 73)• Oversized Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Density Extruded Aluminum Heatsink• Color Customizable Endcap Spacer• 15” L x 9.75” W x 2.5” H

Specifications:Power Rating .................................... 125 Watts x 4 Channel / 2 Ohms............................................................. 75 Watts x 4 Channel / 4 Ohms

Low Pass Range ............................................................40Hz to 400HzLow Pass Slope ................................................................ 12dB/OctaveHigh Pass Filter Range ...................................................40Hz to 400HzHigh Pass Filter Slope ...................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 105dBTotal Harmonic Distortion ............................................. Less than .02%Efficiency ........................................................................................50%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................8.5 grams per mm



46


47


Features:• Class A/B Topology• Audiophile Bi-Polar Output Transistors• Robust Unregulated Power Supply• High Level Input with Signal Sensing Turn On• LPL44 Low Pass Level Control Ready (see pg. 73)• RMD - Remote Voltage Display Ready (see pg. 73)• Oversized Direct Insert Power and Speaker Terminals• Audio Precision Quality Control Verification• High Density Extruded Aluminum Heatsink• Color Customizable Endcap Spacer• 12.7” L x 9.75” W x 2.5” H

Specifications:Power Rating ....................................... 75 Watts x 4 Channel / 2 Ohms............................................................. 50 Watts x 4 Channel / 4 Ohms

Low Pass Range ............................................................40Hz to 400HzLow Pass Slope ................................................................ 12dB/OctaveHigh Pass Filter Range ...................................................40Hz to 400HzHigh Pass Filter Slope ...................................................... 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Ratio ..............................................Greater than 105dBTotal Harmonic Distortion ............................................. Less than .02%Efficiency ....................................................................................... 50%Damping Factor .......................................................... Greater than 200Heatsink Thermal Mass ............................................8.5 grams per mm



48

Integrated SeriesIntegrated Sound System Upgrade for the Chevrolet Camaro (2010-2012)

800 Watts of Additional Audio Horsepower Equipped with a road-proven Phoenix Gold power amp that delivers power and clarity.

Compact DesignThe Integrated Series enclosure has been designed to use minimal space and match the look of your trunk.

Feel your musicThanks to the integrated 10” sub woofer the system allows you to hear and feel the punch of a bass drum.

Before After

49

Remote LCD Screen A touchscreen LCD screen allows you to “tune” your car sonically to your preferences.

Crystal Clear HighsThe Integrated Series will bring your music to life with enhanced highs as it optimizes your factory system.

Dash Mount

Shifter Mount

Real Concert ExperienceThe Integrated Series is digitally programmed to send the right sounds to the right speakers for better performance.

Integrated SeriesiAMP-GM1 - Integrated Sound System Upgrade for Camaro (2010-2012)

Integrated Series. The Integrated Series is the first aftermarket mobile amplifier with full databus awareness and integration, this means it can replace the factory amplifier in a nearly plug n’ play installation. Installing an amplifier into a newer car can be a painful experience of splicing into a maze of wires or using buggy black boxes that will disable many key OEM features and functions of the vehicle. Installing an Integrated Series amplifier is easy, simply remove the stock amplifier, then plug in the Integrated Series amplifier using the provided wiring harnesses. There are no wires to cut, no fishing for obscure wires and no additional band aids to wire up. The amplifier fully retains all the OEM functions such as steering wheel controls, head unit functionality, blue tooth, On-star, chime function, etc. This makes for a predictable and painless installation that is completely reversible when the lease is up or the vehicle is sold.

50

Includes: Amplifier, Subwoofer, Enclosure, Harness and Level Controller

Quick and Painless Plug-n-Play Installation

Custom Fit, High Output 10” Subwoofer Enclosure

800w, 6ch Amplifier with Fully Integrated Vehicle Data-bus System

Integrated Series Programmable Software Interface Enables you to Fine-Tune your System to Perfection.

Remote Touchscreen LCD

51

Features:• All-in-one, complete high-power car audio upgrade solution• 1 hour, quick and painless installation

• AMPLIFIER - i800.6 » 800 Watts, 6 Channels » First fully integrated aftermarket mobile audio amplifier with full data-bus awareness and integration » Created in collaboration with Pacific Accessory Corporation (PAC) OEM integration experts » Easy Plug and Play OEM installation with provided signal and power wiring harnesses » Fully retains all OEM/stock functions such as steering wheel controls, Headunit, Onstar, Bluetooth, etc. » Utilizes Digital Signal Processing System for proper OEM signal integration, crossover and equalization for factory speakers. » Compatible with amplified, or non amplified factory audio systems. » Touch Panel LCD remote control allows adjustment of sub-level, EQ presets, settings, etc. » Subwoofer Pre-Amp Output for easy addition of an even larger subwoofer amplifier » Remote turn-on output for triggering additional aftermarket Amplifiers » Advanced PC Adjustment - 14 Band Digital EQ, +-12dB and user preset storage - 6 pre-configured presets, and 6 user definable presets » User adjustable center channel gain, subwoofer gain, and crossover point » 5 listening positions: Driver, Passenger, Front, Rear, and Off

Specifications:Power Rating ................... Front/Rear: 50 Watts x 4 Channel / 4 Ohms.................................................Center: 25 watts x 1 Channel / 4 Ohms................................................... Sub: 320 watts x 1 Channel / 2 Ohms

Sub Low Pass Range ....................................................30Hz to 300HzLow Pass Slope ............................................................... 24dB/OctaveFront/Rear High Pass Filter Range ................................40Hz to 400HzHigh Pass Filter Slop ........................................................ 12dB/OctaveBass Boost .......................................................................... 0 to +18dBPower Terminal ............................................................................... 4GAFrequency Response ..................................... 20Hz to 20kHz (+/- 1dB)Signal to Noise Rati ...............................................Greater than 100dBTotal Harmonic Distortion ............................................. Less than .01%Efficiency .......................................................................................50% Damping Factor ......................................................... Greater than 200Heatsink Thermal Mass ...........................................9.5 grams per mm........................................ NOTE: Compatible with hardtop vehicles only.

• SUBWOOFER » 10” High Power Subwoofer » High Efficiency Vented Enclosure » Integrated Amplifier Rack

53

SubwoofersThe perfect fusion of advanced acoustic design and state of the art technology: that’s the Ti2-Series of Phoenix Gold subwoofers. Engineered with features such as high temperature OFC copper voice coils, woven tinsel leads systems and a high-excursion CAE/CAD motor design, these subwoofers deliver both gorgeous sound quality and massive SPL performance.

Meanwhile, the Phoenix Gold R1 and R3-Series subwoofers utilize some of the technologies found in the Ti2-Series and offer an outstanding price value without compromising performance. The SL slim mount subwoofers deliver deep, accurate bass in small sealed enclosures perfect for installations where space is limited. Emphasizing reliability and style, these subwoofers are ideal for nearly any system and any budget.

54

R-VENTRVE122 - High Performance Vented Subwoofer Enclosure

R-VENT. Practical form meets perfect function on the uniquely designed RVE loaded enclosure. The special arched structural design provides an extremely strong and anti-resonate subwoofer cabinet. While the high air flow slot vent provides deep and accurate bass on a wide range of music. To top it off the heavy duty metal grill provides full protection from any trunk item such as flying golf clubs or suitcases. Whether you want to shake your windows or just looking for a little low end, fill the RVE loaded enclosure is the perfect solution.

54

55

R-VENTRVE122 - High Performance Vented Subwoofer Enclosure

Features:• Loaded 12 Inch Vented Subwoofer Enclosure• Powder Coated Protective Metal Grill• Anti-Resonant Curved Structural Design• Heavy Duty 5/8 Inch MDF Construction• High Air Flow Slot Vent• Embroidered Logo and Cosmetics Highlights• High Excursion CAE/CAD Subwoofer Motor Design• One Piece Polypropylene Dustcap• High Roll Butyl Rubber Surround• High Temperature OFC Copper Voice Coil• Nickel Plated Spring Wiring Terminal

Specifications:Power Handling ............................................250w RMS - 500w PEAKImpedance ............................................................................... 2 OhmsFrequency Response .................................................... 20hz to 300hz Dimensions ............................................... 18.4” L x 20.8” W x 15.4” H

56

Ti2 SeriesTi215d4 - 15 inch Subwoofer (Dual 4 Ohms)Ti212d4 - 12 inch Subwoofer (Dual 4 Ohms)Ti210d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

Ti212d2 - 12 inch Subwoofer (Dual 2 Ohms)Ti210d2 - 10 inch Subwoofer (Dual 2 Ohms)

56

57

Features:• 40mm of Peak to Peak Excursion• Dual Voice Coil Models• Long Throw Spider Suspension• Woven Tinsel Leads• Expanded Polypropylene Cone• High Excursion CAE/CAD Motor Design• Vented Titanium-Aluminum Hybrid Former• One Piece Aluminum Plated Dustcap• High Roll Butyl Rubber Surround• High Temperature OFC Copper Voice Coils• Nickel Plated 12 Gauge Speaker Terminal• Optimized for Sealed or Vented Enclosures• Rigid Powder Coated Anti-Resonant Castbasket

Specifications:Ti215d4Power Handling ..........................................800w RMS - 1600w PEAKImpedance .......................................................................Dual 4 OhmsFrequency Response ....................................................... 20 to 300Hz

Ti212d4 | TI210d4Power Handling ..........................................600w RMS - 1200w PEAKImpedance .......................................................................Dual 4 OhmsFrequency Response ....................................................... 20 to 300Hz

Ti212d2 | TI210d2Power Handling ..........................................600w RMS - 1200w PEAKImpedance .......................................................................Dual 2 OhmsFrequency Response ....................................................... 20 to 300Hz

One piece aluminum plated dustcap

Expanded polypropelene cone

Pressed Nomex spider system

Die-cast aluminum basket

Ti2 SeriesTi215d4 - 15 inch Subwoofer (Dual 4 Ohms)Ti212d4 - 12 inch Subwoofer (Dual 4 Ohms)Ti210d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

Ti212d2 - 12 inch Subwoofer (Dual 2 Ohms)Ti210d2 - 10 inch Subwoofer (Dual 2 Ohms)

High temperature OFC Voice Coil

Titanium-Aluminum Vented Former

Dual Stacked magnet system

Bumped Backplate

58

SL SeriesSL12d4 - 12 inch Subwoofer (Dual 4 Ohms)SL10d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

SL12d2 - 12 inch Subwoofer (Dual 2 Ohms)SL10d2 - 10 inch Subwoofer (Dual 2 Ohms)

59

Features:• High Excursion Performance with Slim Mounting Depths • 25mm of Peak to Peak Excursion • Dual 2 and 4 Ohms Voice Coil Models • Woven Tinsel Leads• High Excursion CAE/CAD Motor Design • Vented Cone Neck Stabilizer • One Piece Reinforced Injection Molded Cone • Die Cast Aluminum Spider Spacer Heat Sink • High Temperature OFC Copper Voice Coils • Nickel Plated 12 Gauge Speaker Terminal • Optimized for Small Sealed Enclosures • Powder Coated Anti-Resonant Steel Basket

Specifications:SL12d4 | SL10d4Power Handling ............................................300w RMS - 600w PEAKImpedance .......................................................................Dual 4 OhmsFrequency Response ....................................................... 20 to 300HzMounting Depth ............................................................12=4” | 10=3.6”

SL12d2 | SL10d2Power Handling ............................................300w RMS - 600w PEAKImpedance .......................................................................Dual 2 OhmsFrequency Response ....................................................... 20 to 300HzMounting Depth ............................................................12=4” | 10=3.6”

Reinforced Injection Molded Poly Cone

Vented Cone Neck Stabilizer

High Temperature OFC Voice Coil

Pressed Nomex Spider System

SL SeriesSL12d4 - 12 inch Subwoofer (Dual 4 Ohms)SL10d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

SL12d2 - 12 inch Subwoofer (Dual 2 Ohms)SL10d2 - 10 inch Subwoofer (Dual 2 Ohms)

Die Cast Aluminum Spider Spacer Heatsink

Compact High Excursion Motor System

Bumped Backplate

R3 SeriesR312d4 - 12 inch Subwoofer (Dual 4 Ohms)R310d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

R312d2 - 12 inch Subwoofer (Dual 2 Ohms)R310d2 - 10 inch Subwoofer (Dual 2 Ohms)

60

61

Features:• 30mm of Peak to Peak Excursion• Dual 2 and 4 Ohms Voice Coil Models• High Excursion CAE/CAD Motor Design• Vented Titanium-Aluminum Hybrid Former• One Piece Aluminum Plated Dustcap• High Roll Butyl Rubber Surround• High Temperature OFC Copper Voice Coils• Nickel Plated 12 Gauge Speaker Terminal• Optimized for Sealed or Vented Enclosures• Powder Coated Anti-Resonant Steel Basket

Specifications:R312d4 | R310d4Power Handling ............................................400w RMS - 800w PEAKImpedance .......................................................................Dual 4 OhmsFrequency Response ....................................................... 20 to 300Hz

R312d2 | R310d2Power Handling ............................................400w RMS - 800w PEAKImpedance .......................................................................Dual 2 OhmsFrequency Response ....................................................... 20 to 300Hz

One Piece Aluminum Plated Dustcap

Polypropylene Cone

Double Pressed Nomex Spider

R3 SeriesR312d4 - 12 inch Subwoofer (Dual 4 Ohms)R310d4 - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

R312d2 - 12 inch Subwoofer (Dual 2 Ohms)R310d2 - 10 inch Subwoofer (Dual 2 Ohms)

Stamped Steel Basket


Titanium-Aluminum Vented Former

Bumped Backplate

62

R1 SeriesR112d - 12 inch Subwoofer (Dual 4 Ohms)R110d - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

R112 - 12 inch Subwoofer (Single 4 Ohms)R110 - 10 inch Subwoofer (Single 4 Ohms)

63

Features:• 20mm of Peak to Peak Excursion• Single and Dual Voice Coil Models• High Excursion CAE/CAD Motor Design• Vented Kapton Former• One Piece Aluminum Plated Dustcap• High Roll Butyl Rubber Surround• High Temperature OFC Copper Voice Coils• Nickel Plated 12 Gauge Speaker Terminal• Optimized for Sealed or Vented Enclosures• Anti-Resonant Steel Basket

Specifications:R112d | R110dPower Handling ............................................200w RMS - 400w PEAKImpedance .......................................................................Dual 4 OhmsFrequency Response ....................................................... 20 to 300Hz

R112 | R110Power Handling ............................................200w RMS - 400w PEAKImpedance .................................................................... Single 4 OhmsFrequency Response ....................................................... 20 to 300Hz

One Piece Aluminum Plated Dustcap

Polypropylene Cone

Double Pressed Nomex Spider

R1 SeriesR112d - 12 inch Subwoofer (Dual 4 Ohms)R110d - 10 inch Subwoofer (Dual 4 Ohms)...................................................................

R112 - 12 inch Subwoofer (Single 4 Ohms)R110 - 10 inch Subwoofer (Single 4 Ohms)

Stamped Steel Basket


Kapton Vented Former

Bumped Backplate

65

SpeakersA car sound system isn’t simply a collection of parts – there has to be synergy. An amplifier must pair with the subwoofer, the subwoofer must complement the speakers, and all must come together in perfect harmony. With this in mind, Phoenix Gold introduces its new Ti and R-Series coaxial and component speakers.

For the Ti-Series, Phoenix Gold developed coaxial and component set speakers featuring the same unrivaled level of engineering excellence found in the Ti-Series amps and subwoofers. With silk dome tweeters, aluminum-plated polypropylene cones and interwoven tinsel leads, these speakers deliver amazing sound performance in a slick, modern design.

The R-Series coaxial and component set speakers have been designed specifically for pairing with Phoenix Gold R or S-Series products. Boasting 19mm Mylar balanced dome tweeters; triple-laminated, ultra-stiff, lightweight cones, and a high-temperature CAE/CAD design, these speakers offer steadfast performance, amazing sound quality and an exceptional value.

Ti Series SpeakersTi65CS - 6.5in ComponentTi6CS - 6in Component...................................................................

Ti69CX - 6x9in CoaxialTi65CX - 6.5in CoaxialTi6CX - 6in CoaxialTi57CX - 5x7 CoaxialTi5CX - 5in Coaxial

66

67

Features:Component Set Speakers:• 20mm Pivoting Silk Dome Tweeter• Aluminum Plated Grained Polypropylene Cone• Powdercoated Anti-Resonant Steel Basket• Tweeter Flush Mount or Surface Mount Capability• 18dB External Audiophile Crossover with Tweeter Level Adjustment• Integrated Phase Plug• Interwoven Tinsel Leads• Butyl Rubber Surround• High Temperature CAE/CAD Motor Structure

Coaxial Speakers:• 20mm Silk Dome Tweeter• Aluminum Plated Grained Polypropylene Cone• Powdercoated Anti-Resonant Steel Basket• 12dB Integrated Crossover• Interwoven Tinsel Leads• Butyl Rubber Surround• High Temperature CAE/CAD Motor Structure

Specifications:Ti65CS | Ti6CSPower Handling ............................................125w RMS - 250w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 60 to 20kHz

Ti69CXPower Handling ..............................................90w RMS - 180w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 50 to 20kHz

Ti65CX | Ti6CX | Ti57CXPower Handling ..............................................75w RMS - 150w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 60 to 20kHz

Ti5CXPower Handling ..............................................60w RMS - 120w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 70 to 20kHz

Ti Series SpeakersTi65CS - 6.5in Component

Ti6CS - 6in Component...................................................................

Ti69CX - 6x9in CoaxialTi65CX - 6.5in Coaxial

Ti6CX - 6in CoaxialTi57CX - 5x7 Coaxial

Ti5CX - 5in Coaxial

68

R Series SpeakersR65CS - 6.5in Component...................................................................

R69CX - 6x9in CoaxialR65CX - 6.5in CoaxialR57CX - 5x7in CoaxialR5CX - 5in CoaxialR46CX - 4x6 CoaxialR4CX - 4in Coaxial

69

Features:Component Set Speakers:• 19mm Mylar Balanced Dome Tweeter• Triple Laminated, Ultra Stiff and Light Cone• Integrated Phase Plug• Anti-Resonant Steel Basket• UV Treated Foam Surround• Integrated Phase Plug• High Temperature CAE/CAD Motor Structure• 12dB External Audiophile Crossover

Coaxial Speakers:• 19mm Mylar Balanced Dome Tweeter• Anti-Resonant Steel Basket• High Temperature CAE/CAD Motor Structure• Triple Laminated, Ultra Stiff and Light Cone• UV Treated Foam Surround

Specifications:R65CSPower Handling ..............................................75w RMS - 150w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 60 to 20kHz

R69CXPower Handling ..............................................60w RMS - 120w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 70 to 20kHz

R65CX | R57CX | R5CXPower Handling ..............................................50w RMS - 150w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ....................................................... 70 to 20kHz

R46CX | R4CXPower Handling ................................................40w RMS - 80w PEAKImpedance ............................................................................... 4 OhmsFrequency Response ..................................................... 100 to 20kHz

R Series SpeakersR65CS - 6.5in Component

...................................................................

R69CX - 6x9in CoaxialR65CX - 6.5in CoaxialR57CX - 5x7in Coaxial

R5CX - 5in CoaxialR46CX - 4x6 Coaxial

R4CX - 4in Coaxial

71

AccessoriesPhoenix Gold takes pride in paying attention to the details of our products by providing optional accessories for even better performance or convenience. For subwoofers, the G110/G112 powder coated metal grilles provide a stealth and clean look for any system while protecting your woofers from damage. For amplifiers, the RMD (Remote Monitoring Display) plugs directly into most Phoenix Gold amplifiers and allows the system voltage to be visible from anywhere in the vehicle. It’s custom accessories like these that can really put the perfect finishing touch on your audio system.

71

72

Subwoofer GrillsG112 - 12 inch Subwoofer GrillG110 - 10 inch Subwoofer Grill

Features:G112• Powder Coated Protective Metal Grill• Stealth Mounting Design Hides Mounting Screws• Rubber Mounting Gasket Eliminates Vibrations or Air Leaks • Fits all R1, R3 and SL 12 inch models *(Does not fit Ti2 or Elite 12inch models)

G110• Powder Coated Protective Metal Grill• Stealth Mounting Design Hides Mounting Screws• Rubber Mounting Gasket Eliminates Vibrations or Air Leaks • Fits all R1, R3 and SL 10 inch models *(Does not fit Ti2 or Elite 10inch models)

73

Voltage Display | Remote Volume ControlRMD - Remote Mountable Amplifier Voltage Display

RBC - Remote Bass Level ControlLPL44 - Low Pass Level Controller

Features:RMD• Remote Mountable Amplifier Voltage Display• Compact Size for Easy Installation in Any Vehicle• Backlit Blue Display for Excellent Day and Night Time Viewing• Plugs into the RMD port on R, Ti, Elite and certain SD amplifiers• Includes all Mounting Hardware and Cable

RBC• Allows 20dB of Subwoofer Level Adjustment• Cable and Mounting Hardware Included • For Use with Certain SD Amplifiers

LPL44• Allows 20dB of Subwoofer Level Adjustment• Cable and Mounting Hardware Included• For Use with The One, Ti, R and S Series Amplifiers

74

Ask your Sales Person for Items Such as: Video Slatwall Header Displays, Catalogs, Brochures, Apparel, Banners, Floor Signs, Guitar Picks and more...

Promotional Items

phoenix gold 2012

Documents

oem integrated system