photocoupler ps2561-1,-2,-4,ps2561l-1,-2,-4 ps2561l1-1,-2 ...datasheet.buhieen.net/ps2561l.pdf ·...
TRANSCRIPT
DESCRIPTION The PS2561-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon
phototransistor.
The PS2561-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2561L-1, -2, -4 are lead bending type
(Gull-wing) for surface mount.
The PS2561L1-1, -2, -4 are lead bending type for long creepage distance.
The PS2561L2-1, -2, -4 are lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES • High Isolation voltage (BV = 5 000 Vr.m.s.)
• High collector to emitter voltage (VCEO = 80 V)
• High current transfer ratio (CTR = 200 % TYP.)
• High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.)
• Ordering number of taping product: PS2561L-1-E3, E4, F3, F4, PS2561L-2-E3, E4, PS2561L2-1-E3, E4
• UL approved: File No. E72422
• CSA approved: No. CA 101391
• BSI approved: No. 7112/7420
• SEMKO approved: No. 0144211
• NEMKO approved: No. A21409
• DEMKO approved: No. 300535
• FIMKO approved: No. FI10620A1
• VDE approved (Option)
APPLICATIONS • Power supply
• Telephone/FAX.
• FA/OA equipment
• Programmable logic controller
DATA SHEET
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information.
PHOTOCOUPLERPS2561-1,-2,-4,PS2561L-1,-2,-4
PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE
MULTI PHOTOCOUPLER SERIES −NEPOC Series−
The mark shows major revised points. Document No. PN10234EJ02V0DS (2nd edition) Date Published December 2003 CP(K) Printed in Japan NEC Compound Semiconductor Devices 1992, 2003
PACKAGE DIMENSIONS (UNIT : mm)
DIP Type (New package)
PS2561-1TOP VIEW
3.5±
0.3
4.15
±0.4
3.2±
0.4
2.54
1.25±0.150.50±0.10
0.25 M
4.6±0.35
6.5±
0.5
0 to 15˚
7.62
0.25+0.1 –0.05
1 2
4 31. Anode2. Cathode3. Emitter4. Collector
Caution New package 1-ch only
DIP Type
PS2561-4TOP VIEW
1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter10, 12, 14, 16. Collector
19.8±0.5
6.5±
0.5
0 to 15˚
7.62
0.25+0.1 –0.05
3.5±
0.3
4.15
±0.4
3.3±
0.5
2.54
1.25±0.15 0.50±0.10
0.25 M
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
PS2561-1TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
4.6±0.5
6.5±
0.5
3.5±
0.3
4.15
±0.4
3.3±
0.5
2.54
1.25±0.150.50±0.10
0.25 M
0 to 15˚
7.62
0.25+0.1 –0.05
1 2
4 3 9.7±0.5
6.5±
0.5
3.5±
0.3
4.15
±0.4
3.3±
0.5
2.54
1.25±0.15 0.50±0.10
0.25 M
0 to 15˚
7.62
0.25+0.1 –0.05
PS2561-2
1, 3. Anode2, 4. Cathode5, 7. Emitter6, 8. Collector
TOP VIEW
1 2 3 4
8 7 6 5
Data Sheet PN10234EJ02V0DS 2
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Lead Bending Type (New package)
PS2561L-1
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
0.25 M
4.6±0.35
6.5±
0.5
3.5±
0.3
2.54
1.25±0.15
0.15
0.9±0.25
9.60±0.4
0.25
+0.
1 –
0.05
0.1
+0.
1 –
0.05
1 2
4 3
Caution New package 1-ch only
Lead Bending Type
PS2561L-4TOP VIEW
1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter10, 12, 14, 16. Collector
19.8±0.5
6.5±
0.5
2.54
1.25±0.15
0.25 M
3.5±
0.3
0.15
0.9±0.25
9.60±0.4
0.25
+0.
1 –
0.05
0.1
+0.
1 –
0.05
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
PS2561L-1
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
4.6±0.5
6.5±
0.5
0.25 M
3.5±
0.3
2.54
1.25±0.15
0.15
0.9±0.25
9.60±0.4
0.25
+0.
1 –
0.05
0.1
+0.
1 –
0.05
1 2
4 3
PS2561L-2
1, 3. Anode2, 4. Cathode5, 7. Emitter6, 8. Collector
TOP VIEW9.7±0.5
6.5±
0.5
2.54
1.25±0.15
0.25 M 0.15
3.5±
0.3
0.9±0.25
9.60±0.4
0.25
+0.
1 –
0.05
0.1
+0.
1 –
0.05
1 2 3 4
8 7 6 5
Data Sheet PN10234EJ02V0DS 3
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Lead Bending Type For Long Creepage Distance (New Package)
PS2561L1-1
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
1 2
4 3
0 to 15˚0.25+0.1 –0.05
10.16
2.54
0.25 M0.50±0.1
1.25±0.15
3.85
±0
.43.
15
±0.3
5
3.5
±0.3
6.5±
0.5
4.6±0.35
1 2
4 3
Lead Bending Type For Long Creepage Distance
PS2561L1-1
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
10.16
0.25+0.1 –0.05
0 to 15˚
4.6±0.5
6.5±
0.5
3.5±
0.3
3.15
±0.3
53.
85±0
.4
2.54
1.25±0.150.50±0.10
0.25 M
1 2
4 31, 3. Anode2, 4. Cathode5, 7. Emitter6, 8. Collector
TOP VIEW9.7±0.5
6.5±
0.5
1 2 3 4
8 7 6 5
PS2561L1-2
10.16
0.25+0.1 –0.05
0 to 15˚
3.5±
0.3
3.15
±0.3
53.
85±0
.4
2.54
1.25±0.150.50±0.10
0.25 M
PS2561L1-4TOP VIEW
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter10, 12, 14, 16. Collector
10.16
0.25+0.1 –0.05
0 to 15˚
19.8±0.5
6.5±
0.5
3.5±
0.3
3.15
±0.3
53.
85±0
.4
2.54
1.25±0.150.50±0.10
0.25 M
Data Sheet PN10234EJ02V0DS 4
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Lead Bending Type For Long Creepage Distance (Gull-Wing) (New Package)
PS2561L2-1
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
1 2
4 3
0.25 M
0.25
2.54
1.25±0.15
3.5±
0.3
6.5±
0.5
4.6±0.35
1 2
4 3
11.8+0.2–0.5
0.25
+0.
1
–0.0
5
0.25
±0.2
0.9±0.25
10.16
Lead Bending Type For Long Creepage Distance (Gull-Wing)
PS2561L2-4
TOP VIEW
0.9±0.25
0.25
+0.
1 –
0.05
10.16
11.8+0.2–0.5
0.25
±0.2
3.5±
0.3
2.54 0.25
1.25±0.15
0.25 M
19.8±0.5
6.5±
0.5
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter10, 12, 14, 16. Collector
PS2561L2-1
4.6±0.5
6.5±
0.5
3.5±
0.3
2.54 0.25
1.25±0.15
0.25 M
0.9±0.25
0.25
+0.
1 –
0.05
10.16
11.8+0.2–0.5
0.25
±0.2
TOP VIEW
1. Anode2. Cathode3. Emitter4. Collector
1 2
4 31, 3. Anode2, 4. Cathode5, 7. Emitter6, 8. Collector
TOP VIEW
1 2 3 4
8 7 6 5
PS2561L2-2
0.9±0.25
0.25
+0.
1 –
0.05
10.16
11.8+0.2–0.5
0.25
±0.2
9.7±0.5
6.5±
0.5
3.5±
0.3
2.54 0.25
1.25±0.15
0.25 M
Data Sheet PN10234EJ02V0DS 5
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
MARKING EXAMPLE
2561M 003
PS2561-2M 003
E
F
PS2561-1 PS2561-2
Assembly Lot
Week AssembledYear Assembled(Last 1 Digit)
In-house CodeCTR Rank Code
No. 1 pinMark
Package
New PKG
Standard PKG
Made in Japan Made in Taiwan
No. 1 pinMark
M
F
Week AssembledYear Assembled(Last 1 Digit)
In-house CodeCTR Rank Code
Package
New PKG
Standard PKG
Made in Japan Made in Taiwan
0 03M 0 03
Blank Blank
Country Assembled
Assembly Lot
H
No. 1 pinMark
PS2561-4M 003
PS2561-4
M
F
Week AssembledYear Assembled(Last 1 Digit)
In-house CodeCTR Rank Code
Package
New PKG
Standard PKG
Made in Japan Made in Taiwan
0 03
Blank
Country Assembled
Assembly Lot
Data Sheet PN10234EJ02V0DS 6
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
ORDERING INFORMATION (1/2)
Part Number Package Packing Style Safety Standard
Approval
Application Part
Number *1
PS2561-1 4-pin DIP Magazine case 100 pcs Standard products PS2561-1
PS2561L-1 (UL, CSA, BSI,
PS2561L1-1 NEMKO, SEMKO,
PS2561L2-1 DEMKO, FIMKO
PS2561L-1-E3 Embossed Tape 1 000 pcs/reel approved)
PS2561L-1-E4
PS2561L-1-F3 Embossed Tape 2 000 pcs/reel
PS2561L-1-F4
PS2561L2-1-E3 Embossed Tape 1 000 pcs/reel
PS2561L2-1-E4
PS2561-2 8-pin DIP Magazine case 45 pcs PS2561-2
PS2561L-2
PS2561L1-2
PS2561L2-2
PS2561L-2-E3 Embossed Tape 1 000 pcs/reel
PS2561L-2-E4
PS2561-4 16-pin DIP Magazine case 20 pcs PS2561-4
PS2561L-4
PS2561L1-4
PS2561L2-4
PS2561-1-V 4-pin DIP Magazine case 100 pcs VDE approved PS2561-1
PS2561L-1-V products (Option)
PS2561L1-1-V
PS2561L2-1-V
PS2561L-1-V-E3 Embossed Tape 1 000 pcs/reel
PS2561L-1-V-E4
PS2561L-1-V-F3 Embossed Tape 2 000 pcs/reel
PS2561L-1-V-F4
PS2561L2-1-V-E3 Embossed Tape 1 000 pcs/reel
PS2561L2-1-V-E4
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10234EJ02V0DS 7
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
ORDERING INFORMATION (2/2)
Part Number Package Packing Style Safety Standard
Approval
Application Part
Number *1
PS2561-2-V 8-pin DIP Magazine case 45 pcs VDE approved PS2561-2
PS2561L-2-V products (Option)
PS2561L1-2-V
PS2561L2-2-V
PS2561L-2-V-E3 Embossed Tape 1 000 pcs/reel
PS2561L-2-V-E4
PS2561-4-V 16-pin DIP Magazine case 20 pcs PS2561-4
PS2561L-4-V
PS2561L1-4-V
PS2561L2-4-V
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10234EJ02V0DS 8
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
Parameter Symbol Ratings Unit
PS2561-1 PS2561-2,-4
Diode Reverse Voltage VR 6 V
Forward Current (DC) IF 80 mA
Power Dissipation Derating ∆PD/°C 1.5 1.2 mW/°C
Power Dissipation PD 150 120 mW/ch
Peak Forward Current*1
IFP 1 A
Transistor Collector to Emitter Voltage VCEO 80 V
Emitter to Collector Voltage VECO 7 V
Collector Current IC 50 mA/ch
Power Dissipation Derating ∆PC/°C 1.5 1.2 mW/°C
Power Dissipation PC 150 120 mW/ch
Isolation Voltage*2 BV 5 000 Vr.m.s.
Operating Ambient Temperature TA –55 to +100 °C
Storage Temperature Tstg –55 to +150 °C
*1 PW = 100 µs, Duty Cycle = 1 %
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output
Data Sheet PN10234EJ02V0DS 9
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
ELECTRICAL CHARACTERISTICS (TA = 25 °C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 10 mA 1.17 1.4 V
Reverse Current IR VR = 5 V 5 µA
Terminal Capacitance Ct V = 0 V, f = 1.0 MHz 50 pF
Transistor Collector to Emitter Dark
Current
ICEO VCE = 80 V, IF = 0 mA 100 nA
Coupled Current Transfer Ratio
(IC/IF)*1
CTR IF = 5 mA, VCE = 5 V 80 200 400 %
Collector Saturation
Voltage
VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V
Isolation Resistance RI-O VI-O = 1.0 kVDC 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF
Rise Time*2 tr VCC = 10 V, IC = 2 mA, RL = 100 Ω 3 µs
Fall Time*2 tf 5
*1 CTR rank (only PS2561-1, PS2561L-1, PS2561L1-1, PS2561L2-1)
L : 200 to 400 (%)
M : 80 to 240 (%)
D : 100 to 300 (%)
H : 80 to 160 (%)
W : 130 to 260 (%)
*2 Test circuit for switching time
VCC
VOUT
RL = 100 Ω50 Ω
IF
µ
Pulse Input
PW = 100 sDuty Cycle = 1/10
Data Sheet PN10234EJ02V0DS 10
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)
150
100
50
0 25 50 75 100 125 150
1.5 mW/˚C
1.2 mW/˚C
150
100
50
25 50 75 100 125 1500
10 000
100
1 000
100
10
1
7550250–25– 50
VCE = 80 V10
1.00.80.60.40.20
5
1
0.5
0.1
10 mA
40
1.5 mW/˚C
1.2 mW/˚C
20 mA50 mA
2 mA
IF = 1 mA
5 mA
70
2
60
50
40
30
20
10
0 4 6 8 10
20 mA
IF = 5 mA
10 mA50 m
A
40 V24 V10 V
5 V
PS2561-1
PS2561-2,-4
PS2561-1
PS2561-2,-4
100
1.51.41.31.21.11.00.90.80.7
50
10
5
1
0.5
0.1
0 ˚C–25 ˚C–55 ˚C
+60 ˚C+25 ˚C
TA = +100 ˚C
Dio
de P
ower
Dis
sipa
tion
PD (
mW
)
Tra
nsis
tor
Pow
er D
issi
patio
n P
C (
mW
)
Ambient Temperature TA (˚C)
For
war
d C
urre
nt I
F (
mA
)
Forward Voltage VF (V)
Col
lect
or C
urre
nt I
C (
mA
)
Collector to Emitter Voltage VCE (V)
Col
lect
or to
Em
itter
Dar
k C
urre
nt I
CE
O (
nA)
Collector Saturation Voltage VCE(sat) (V)
Ambient Temperature TA (˚C)
Ambient Temperature TA (˚C)
DIODE POWER DISSIPATION vs.AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATIONvs. AMBIENT TEMPERATURE
FORWARD CURRENT vs.FORWARD VOLTAGE
COLLECTOR CURRENT vs.COLLECTOR TO EMITTER VOLTAGE
COLLECTOR TO EMITTER DARKCURRENT vs. AMBIENT TEMPERATURE
COLLECTOR CURRENT vs.COLLECTOR SATURATION VOLTAGE
Col
lect
or C
urre
nt I
C (
mA
)
Remark The graphs indicate nominal characteristics.
Data Sheet PN10234EJ02V0DS 11
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
1.2
–50
1.0
0.8
0.6
0.4
0.2
0–25 0 25 50 75 100
450
400
350
300
250
200
150
100
50
00.05 0.1 0.5 1 5 10 50
50
10
1
0.110 k5 k1 k5001005010
1 000
100
10
1100 k50 k10 k5 k1 k500100
0
–5
–10
–15
–20
0.5 1 2 5 10 20 50 100 200 500
IC = 2 mA,VCC = 10 V,CTR = 290 %
tftr
td
ts
IF = 5 mA,VCC = 5 V,CTR = 290 %
ts
td
tr
tf
IF = 5 mA,VCE = 5 V
100 Ω
300 Ω
RL = 1 kΩ
IF = 5 mATA = 25 ˚C
IF = 5 mATA = 60 ˚C
1.2
1.0
0.8
0.6
0.4
0.2
0102 103 104 105
Normalized to 1.0at TA = 25 ˚C,IF = 5 mA, VCE = 5 V
Forward Current IF (mA)Ambient Temperature TA (˚C)
Load Resistance RL (Ω)
Frequency f (kHz)
Nor
mal
ized
Cur
rent
Tra
nsfe
r R
atio
CT
R
Cur
rent
Tra
nsfe
r R
atio
CT
R (
%)
Nor
mal
ized
Gai
n G
V
Load Resistance RL (Ω)
Sw
itchi
ng T
ime
t (
s)
µ
NORMALIZED CURRENT TRANSFERRATIO vs. AMBIENT TEMPERATURE
CURRENT TRANSFER RATIO vs.FORWARD CURRENT
SWITCHING TIME vs.LOAD RESISTANCE
SWITCHING TIME vs.LOAD RESISTANCE
FREQUENCY RESPONSE LONG TERM CTR DEGRADATION
Sw
itchi
ng T
ime
t (
s)
µ
TYP.
Time (Hr)
CT
R (
Rel
ativ
e V
alue
)
Sample ABC
VCE = 5 V
Remark The graphs indicate nominal characteristics.
Data Sheet PN10234EJ02V0DS 12
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
TAPING SPECIFICATIONS (UNIT : mm)
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
PS2561L-1-E3 PS2561L-1-E4
1.55±0.1
2.0±0.14.0±0.1 1.
75±0
.1
4.5 MAX.
4.0±0.1
0.4
5.3±0.1
8.0±0.1
7.5±
0.1
16.0
±0.3
10.3
±0.1
1.5 +0.1–0φ
Packing: 1 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2φ
21.0±0.8φ
254±
2.0
80.0
±1.0
2.0±0.5
φ φ
15.9 to 19.4Outer edge of flange
21.5±1.0
17.5±1.0
Data Sheet PN10234EJ02V0DS 13
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Tape Direction
PS2561L-1-F3 PS2561L-1-F4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.14.0±0.1 1.
75±0
.1
4.5 MAX.
4.0±0.1
0.4
5.3±0.1
8.0±0.1
7.5±
0.1
16.0
±0.3
10.3
±0.1
1.5 +0.1–0
Outline and Dimensions (Reel)
Packing: 2 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2φ
21.0±0.8φ
330±
2.0
100±
1.0
2.0±0.5
φ φ
15.9 to 19.4Outer edge offlange
21.5±1.0
17.5±1.0
Data Sheet PN10234EJ02V0DS 14
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Tape Direction
PS2561L2-E3 PS2561L2-E4
Outline and Dimensions (Tape)
2.05±0.1
2.0±0.14.0±0.1 1.55±0.1 1.
75±0
.1
4.4±0.2
12.3
5±0.
15
0.38
11.5
±0.1
24.0
±0.3
6.6±0.2
12.0±0.1
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
2.0±0.5
R 1.0
13.0±0.2φ
21.0±0.8φ
330±
2.0
φ 100±
1.0
φ
2.0±0.5
29.5±1.0
25.5±1.0
23.9 to 27.4Outer edge of flange
Data Sheet PN10234EJ02V0DS 15
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Tape Direction
PS2561L-2-E3 PS2561L-2-E4
Outline and Dimensions (Tape)
1.55±0.1
2.0±0.14.0±0.1 1.
75±0
.1
4.5 MAX.
10.4±0.1
12.0±0.1
Outline and Dimensions (Reel)
Packing: 1 000 pcs/reel
330±
2.0
100±
1.0
2.0±0.513.0±0.2
R 1.021.0±0.8
2.0±0.5
1.5 +0.1–0
7.5±
0.1
10.3
±0.1
16.0
±0.3
4.0±0.1
0.3
15.9 to 19.4Outer edge offlange
17.5±1.0
21.5±1.0
Data Sheet PN10234EJ02V0DS 16
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s(preheating)
220˚C
180˚C
Pac
kage
Sur
face
Tem
pera
ture
T (
˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.
Data Sheet PN10234EJ02V0DS 17
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
USAGE CAUTIONS 1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
Data Sheet PN10234EJ02V0DS 18
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Speck Unit
Application classification (DIN VDE 0109)
for rated line voltages ≤ 300 Vr.m.s.
for rated line voltages ≤ 600 Vr.m.s.
IV
III
Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.2 × UIORM, Pd < 5 pC
UIORM
Upr
890
1 068
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices test)
Upr = 1.6 × UIORM, Pd < 5 pC
Upr 1 424 Vpeak
Highest permissible overvoltage UTR 8 000 Vpeak
Degree of pollution (DIN VDE 0109) 2
Clearance distance > 7.0 mm
Creepage distance > 7.0 mm
Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI 175
Material group (DIN VDE 0109) III a
Storage temperature range Tstg –55 to +150 °C
Operating temperature range TA –55 to +100 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25 °C
VIO = 500 V dc at TA MAX. at least 100 °C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = 175 °C (Tsi)
Tsi
Isi
Psi
Ris MIN.
175
400
700
109
°C
mA
mW
Ω
Data Sheet PN10234EJ02V0DS 19
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
M8E 00. 4 - 0110
The information in this document is current as of December, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information.No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others.Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features.NEC semiconductor products are classified into the following three quality grades:"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipmentand industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disastersystems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, lifesupport systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application.(Note)(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
Data Sheet PN10234EJ02V0DS 20
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4
Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
NEC Compound Semiconductor Devices Hong Kong Limited E-mail: [email protected] (sales, technical and general) Hong Kong Head Office Taipei Branch Office Korea Branch Office
TEL: +852-3107-7303TEL: +886-2-8712-0478TEL: +82-2-558-2120
FAX: +852-3107-7309 FAX: +886-2-2545-3859FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487
California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0310
NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: [email protected] (sales and general) [email protected] (technical) 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579
For further information, please contact
PS2561-1,-2,-4,PS2561L-1,-2,-4,PS2561L1-1,-2,-4,PS2561L2-1,-2,-4