physical energy modeling guideline
TRANSCRIPT
-
7/23/2019 Physical Energy Modeling Guideline
1/41
(MODEL IT) 1 Please import DXF file (drawing)
1_GMP_Assignment_Building_Typical_Layout.dxf
-
7/23/2019 Physical Energy Modeling Guideline
2/41
(MODEL IT) 1 Please import DXF file (drawing)
Model ITDXF filesAttach DXF File
-
7/23/2019 Physical Energy Modeling Guideline
3/41
(MODEL IT) 1 Please import DXF file (drawing)
Model ITDXF filesAttach DXF File, Please define the scale factor as millimetres.
-
7/23/2019 Physical Energy Modeling Guideline
4/41
(MODEL IT) 1 Please import DXF file (drawing)
If you can see the drawings outlines, drawing is attached in Model IT correctly
-
7/23/2019 Physical Energy Modeling Guideline
5/41
(MODEL IT) 2. Please create zones
As core area shows many rooms, we will simplify the zone as in the below.
Office1
Office2
MEC Corridor Toilet Void Corridor MEC
-
7/23/2019 Physical Energy Modeling Guideline
6/41
(MODEL IT) 2. Please create zones
Please create core zone first
You can create square shape of zones by using this icon.
Name of zones
Type of the zones
How much far is from ground (0m)
Height of zone
-
7/23/2019 Physical Energy Modeling Guideline
7/41
(MODEL IT) 2. Please create zones
Please create core zone first
-
7/23/2019 Physical Energy Modeling Guideline
8/41
(MODEL IT) 2. Please create zones
Please create office zone first
You can click this icon to create office zone
Name of zones
Type of the zones
How much far is from ground (0m)
Height of zone
-
7/23/2019 Physical Energy Modeling Guideline
9/41
(MODEL IT) 2. Please create zones
Please create office zone first
Tip. Please use construction line to create straight line. It is outline of modeling.
-
7/23/2019 Physical Energy Modeling Guideline
10/41
(MODEL IT) 2. Please create zones
You can finish one floor.
-
7/23/2019 Physical Energy Modeling Guideline
11/41
(MODEL IT) 2. Please create zones
You can copy the floor by floor until 9thfloor.
Please click Right as in the below.
-
7/23/2019 Physical Energy Modeling Guideline
12/41
(MODEL IT) 2. Please create zones
You can copy the floor by floor until 9thfloor.
Please click Right as in the below. You can the screen as in the below.
-
7/23/2019 Physical Energy Modeling Guideline
13/41
(MODEL IT) 2. Please create zones
You can copy the floor by floor until 9thfloor.
Please select all of the zones.
-
7/23/2019 Physical Energy Modeling Guideline
14/41
(MODEL IT) 2. Please create zones
You can copy the floor by floor until 9thfloor.
Please select all of the zones.
Please click left end point and locate the selected zones above of previous space.
-
7/23/2019 Physical Energy Modeling Guideline
15/41
(MODEL IT) 2. Please create zones
As ground floor (6m) has different height with office floor (4.5m), we should change height of
zones as in the below.
Please use independent
Zone level from ground
Zone height
You can input height what you want
(4.5m from 6.0m)
-
7/23/2019 Physical Energy Modeling Guideline
16/41
(MODEL IT) 3. Please create window in the zones
After creating two lobby floor and office floor, we need to create windows. Please select the
lobby floor first.
IES provides three optionsNormally first and second option are used
(1) Add by percentage areaThis will automatically define window area based on WWR.
-
7/23/2019 Physical Energy Modeling Guideline
17/41
3. Please create window in the zones
After creating two lobby floor and office floor, we need to create windows. Please select the
lobby floor first.
IES provides three optionsNormally first and second option are used
(2) Add by percentage areaThis will automatically define window area based on WWR.
But it allows users to define WWR with consideration of height of window as well.
-
7/23/2019 Physical Energy Modeling Guideline
18/41
(MODEL IT) 3. Please create window in the zones
After creating two lobby floor and office floor, we need to create windows. Please select the
lobby floor first.
Please use table for lobby floor and office floor in
3_GMP_Assignment_Building_Area_Height.xlsx
-
7/23/2019 Physical Energy Modeling Guideline
19/41
(MODEL IT) 3. Please create window in the zones
You can check models as in the below.
Please copy office floor until 9thfloor.
-
7/23/2019 Physical Energy Modeling Guideline
20/41
(MODEL IT) 4. Please finalize the floors
You can check models as in the below.
-
7/23/2019 Physical Energy Modeling Guideline
21/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
-
7/23/2019 Physical Energy Modeling Guideline
22/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
-
7/23/2019 Physical Energy Modeling Guideline
23/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Please click this icon to create operating schedule.
-
7/23/2019 Physical Energy Modeling Guideline
24/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Please click New and create daily operating schedule.
Name
Profile
-
7/23/2019 Physical Energy Modeling Guideline
25/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Please define the room condition.
-
7/23/2019 Physical Energy Modeling Guideline
26/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Please define the system.
-
7/23/2019 Physical Energy Modeling Guideline
27/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Please define the internal condition. Please click Add/edit to input internal condition.
-
7/23/2019 Physical Energy Modeling Guideline
28/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
LPD input.
-
7/23/2019 Physical Energy Modeling Guideline
29/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
EPD input.
-
7/23/2019 Physical Energy Modeling Guideline
30/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
Occupancy input.
-
7/23/2019 Physical Energy Modeling Guideline
31/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
infiltration input.
( )
-
7/23/2019 Physical Energy Modeling Guideline
32/41
(Apacbe) 1. Please input internal condition
Please open 2_GMP_Assignment_Building_Internal_Condition.xlsx.
ToolsBuilding Template Manager.
In same way, please finalize all internal condition.
( b ) l l d
-
7/23/2019 Physical Energy Modeling Guideline
33/41
(Apacbe) 1. Please input internal condition
Please assign the internal condition in zones.
ViewTabular Room Data
(A b ) 1 Pl i i l di i
-
7/23/2019 Physical Energy Modeling Guideline
34/41
(Apacbe) 1. Please input internal condition
Please assign the internal condition in zones.
ViewTabular Room Data
(A b ) 2 Pl d fi h i d d ll i
-
7/23/2019 Physical Energy Modeling Guideline
35/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
Please click this icon to create window and external wall
(A b ) 2 Pl d fi th i d d ll ti
-
7/23/2019 Physical Energy Modeling Guideline
36/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
External Wall
(A b ) 2 Pl d fi th i d d ll ti
-
7/23/2019 Physical Energy Modeling Guideline
37/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
External Wall0.56W/m2K
(Apacbe) 2 Pl d fi th i d d ll ti
-
7/23/2019 Physical Energy Modeling Guideline
38/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
External Window
(Apacbe) 2 Please define the window and wall properties
-
7/23/2019 Physical Energy Modeling Guideline
39/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
External Window1.68W/m2K and SC 0.387
(Apacbe) 2 Please define the window and wall properties
-
7/23/2019 Physical Energy Modeling Guideline
40/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
ToolsBuilding Template Manager.
External Window1.68W/m2K and SC 0.387
(Apacbe) 2 Please define the window and wall properties
-
7/23/2019 Physical Energy Modeling Guideline
41/41
(Apacbe) 2. Please define the window and wall properties
Please open 4_GMP_Assignment_Building_ETTV_Calculation.xlsx.
We need to assign the wall and window as in the below.