pioneer_--_deh-4000ub_-3050ub
TRANSCRIPT
PIONEER CORPORATION 4-1, Meguro 1-chome,PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, LonPIONEER EUROPE NV Haven 1087, Keetberglaan 1, 912PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253
PIONEER CORPORATION 2007
DEH-4000UB/XS/EW5
Meguro-ku, Tokyo 153-8654, Japang Beach, CA 90801-1760, U.S.A.0 Melsele, BelgiumAlexandra Road, #04-01, Singapore 159936
ORDER NO.
CRT4052
CD RDS RECEIVER
DEH-4000UB/XS/EW5CD RECEIVER
DEH-3050UB/XS/ES
DEH-3050UB/XU/CN5
This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks
CX-3240 CRT4050 S10.5COMP2-iPod/USB CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
For details, refer to "Important Check Points for Good Servicing".
K-ZZA. NOV. 2007 Printed in Japan
C
D
F
A
B
E
1 2 3 4
SAFETY INFORMATION
CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CLASS 1LASER PRODUCT
WARNING!The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1.A specially instructed person should do servicing operation of the apparatus.
Laser diode characteristicsWave length : 785 nm to 814 nm
Maximum output : 1 190 W(Emitting period : unlimited)
Additional Laser Caution
Transistors Q101 in PCB drive the laser diodes.When Q101 is shorted between their terminals, the laser diodes will radiate beam.If the top cover is removed with no disc loaded while such short-circuit is continued, the naked eyes may be exposed to the laser beam.
- Safety Precautions for those who Service this Unit.
When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safelyrepair complex products such as those covered by this manual.Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do soand refer the repair to a qualified service technician.
DEH-4000UB/XS/EW521 2 3 4
C
D
F
A
B
E
5 6 7 8
CAUTIONDanger of explosion if battery is incorrectly replaced.Replaced only with the same or equivalent type recommended by the manufacture.Discord used batteries according to the manufacture's instructions.
DEH-4000UB/XS/EW5 35 6 7 8
C
D
F
A
B
E
1 2 3 4
[Important Check Points for Good Servicing]In this manual, procedures that must be performed during repairs are marked with the below symbol.Please be sure to confirm and follow these procedures.
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.
1 Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2 Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise.
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.Soldering should be finished with the proper quantity. (Refer to the example)
4 Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5 Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.If you find a damaged power cord, please exchange it with a suitable one.
9 There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary.
a Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
DEH-4000UB/XS/EW541 2 3 4
C
D
F
A
B
E
5 6 7 8
CONTENTS SAFETY INFORMATION .....................................................................................................................................21. SERVICE PRECAUTIONS................................................................................................................................6
1.1 SERVICE PRECAUTIONS.........................................................................................................................61.2 NOTES ON SOLDERING...........................................................................................................................6
2. SPECIFICATIONS.............................................................................................................................................72.1 SPECIFICATIONS ......................................................................................................................................72.2 DISC/CONTENT FORMAT.........................................................................................................................92.3 PANEL FACILITIES ..................................................................................................................................102.4 CONNECTION DIAGRAM........................................................................................................................13
3. BASIC ITEMS FOR SERVICE ........................................................................................................................153.1 CHECK POINTS AFTER SERVICING .....................................................................................................153.2 PCB LOCATIONS.....................................................................................................................................153.3 JIGS LIST .................................................................................................................................................163.4 CLEANING ...............................................................................................................................................16
4. BLOCK DIAGRAM ..........................................................................................................................................184.1 BLOCK DIAGRAM....................................................................................................................................18
5. DIAGNOSIS ....................................................................................................................................................235.1 OPERATIONAL FLOWCHART.................................................................................................................235.2 ERROR CODE LIST.................................................................................................................................245.3 CONNECTOR FUNCTION DESCRIPTION .............................................................................................26
6. SERVICE MODE.............................................................................................................................................276.1 CD TEST MODE.......................................................................................................................................27
7. DISASSEMBLY ...............................................................................................................................................308. EACH SETTING AND ADJUSTMENT............................................................................................................35
8.1 PCL OUTPUT CONFIRMATION ..............................................................................................................358.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT ....................................................36
9. EXPLODED VIEWS AND PARTS LIST ..........................................................................................................389.1 PACKING..................................................................................................................................................389.2 EXTERIOR(1) ...........................................................................................................................................409.3 EXTERIOR(2) ...........................................................................................................................................429.4 CD MECHANISM MODULE .....................................................................................................................44
10. SCHEMATIC DIAGRAM................................................................................................................................4610.1 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)............................................................................4610.2 KEYBOARD UNIT ..................................................................................................................................5210.3 CD MECHANISM MODULE(GUIDE PAGE)...........................................................................................5410.4 WAVEFORMS.........................................................................................................................................60
11. PCB CONNECTION DIAGRAM ....................................................................................................................6411.1 TUNER AMP UNIT .................................................................................................................................6411.2 KEYBOARD UNIT...................................................................................................................................6811.3 CD CORE UNIT(S10.5COMP2-USB).....................................................................................................70
12. ELECTRICAL PARTS LIST...........................................................................................................................72
DEH-4000UB/XS/EW5 55 6 7 8
C
D
F
A
B
E
1 2 3 4
1. SERVICE PRECAUTIONS1.1 SERVICE PRECAUTIONS
1.2 NOTES ON SOLDERING
- Service Precaution1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual.2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit.3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment (shorting-solder) by referring to "the DISASSEMBLY".4. After replacing the pickup unit, be sure to check the grating.5. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic induction.6. The sheet (Mechanism cover) can not be reused if you removed it.
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit. Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs accompanied by reworking of soldering.
Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C. Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of the soldering iron.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia.
DEH-4000UB/XS/EW561 2 3 4
C
D
F
A
B
E
5 6 7 8
2. SPECIFICATIONS2.1 SPECIFICATIONS
- EW5 Model
Backup current .................................... 5 mA or less
DEH-4000UB/XS/EW5 75 6 7 8
C
D
F
A
B
E
1 2 3 4
- ES Model
Backup current .................................... 5 mA or less
DEH-4000UB/XS/EW581 2 3 4
C
D
F
A
B
E
5 6 7 8
2.2 DISC/CONTENT FORMAT
- CN5 Model
Backup current .................................... 5 mA or less
DEH-4000UB/XS/EW5 95 6 7 8
C
D
F
A
B
E
1 2 3 4
2.3 PANEL FACILITIES
DEH-4000UB/XS/EW5101 2 3 4
C
D
F
A
B
E
5 6 7 8
DEH-4000UB/XS/EW5 115 6 7 8
C
D
F
A
B
E
1 2 3 4
DEH-4000UB/XS/EW5121 2 3 4
C
D
F
A
B
E
5 6 7 8
2.4 CONNECTION DIAGRAM
- EW5 Model
DEH-4000UB/XS/EW5 135 6 7 8
C
D
F
A
B
E
1 2 3 4
- ES, CN5 Model
DEH-4000UB/XS/EW5141 2 3 4
C
D
F
A
B
E
5 6 7 8
3. BASIC ITEMS FOR SERVICE3.1 CHECK POINTS AFTER SERVICING
3.2 PCB LOCATIONS
To keep the product quality after servicing, please confirm following check points.
No. Procedures Item to be confirmed1 Confirm whether the customer complain has been
solved.If the customer complain occurs with the specificmedia, use it for the operation check.
The customer complain must not be reappeared.Display, audio and operations must be normal.
2 CD Play back a CD.(Track search)
No malfunction on display, audio and operation.Display, audio and operations must be normal.
3 FM/AM tuner Check FM/AM tuner action.(Seek, Preset)Switch band to check both FM and AM.
Display, audio and operations must be normal.
4 Check whether no disc is inside the product. The media used for the operating check must beejected.
5 Appearance check No scratches or dirt on its appearance afterreceiving it for service.
See the table below for the items to be checked regarding audio:
Item to be checked regarding audioDistortionNoiseVolume too lowVolume too highVolume fluctuatingSound interrupted
A
B Keyboard Unit
C
Tuner Amp Unit
CD Core Unit(S10.5COMP2-USB)
Unit Number : YWM5203(EW5)Unit Number : YWM5205(ES)Unit Number : YWM5207(CN5)Unit Name : Tuner Amp Unit Unit Number : (EW5)Unit Number : (ES)Unit Name : Keyboard Unit Unit Number : (CN5)Unit Name : Keyboard Unit Unit Number : CWX3527 Unit Name : CD Core Unit (S10.5COMP2-USB)
DEH-4000UB/XS/EW5 155 6 7 8
C
D
F
A
B
E
1 2 3 4
3.3 JIGS LIST
3.4 CLEANING
- Jigs List NameTest DiscL.P.F.
Jig No.TCD-782
RemarksChecking the gratingChecking the grating (Two pieces)
Name Jig No. Remarks
- Grease List NameGreaseGrease
Grease No.GEM1024GEM1045
RemarksCD Mechanism ModuleCD Mechanism Module
Name Grease No. Remarks
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
- Jigs List NameTest DiscL.P.F.
Jig No.TCD-782
RemarksChecking the gratingChecking the grating (Two pieces)
Name Jig No. Remarks
- Grease List NameGreaseGrease
Grease No.GEM1024GEM1045
RemarksCD Mechanism ModuleCD Mechanism Module
Name Grease No. Remarks
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
DEH-4000UB/XS/EW5161 2 3 4
C
D
F
A
B
E
5 6 7 8
DEH-4000UB/XS/EW5 175 6 7 8
C
D
F
A
B
E
VST,VCK
NL
DL
VDD
XL
ILM
EN
VIN
FINV
SW
ND
Q841
Q842
V REGULIC501
BD9781HF
A
VD
1 2 3 4
4. BLOCK DIAGRAM4.1 BLOCK DIAGRAM
40MUTE
49
SYSTEMCONTROLLER
IC 601(2/2)
CN4011
2,3
SWVDD
TUNER AMP UNIT
TU
C
35DPDT
36KYDT
51ILMPW
AVDD
ANTENNA
CN701
VDD
VDD3.3V
19DSENS
CDL
VD 7.5V REGULATORVD
VDCONT
B.UP
Q702
Q701
BRST,BRXEN,BSRQ,BDATA,BSCK
11
7
18
12
TU
NP
DO
TU
NP
CK
TU
NP
DI
CDRST
19
25
AU
28
24
SYNC
USBCTLFLG
B.UP
IC702NJM2885DL1-33
CD 3.3V REGULATOR
3 1
CDRST23
22
VCC
REARAUX
AUXLAUXGND
54
6CN621
3494
KEY1KEY2
KEYD
KEYAD21
3WIRED
REMOTE
7
1
3
4 DP
DM
CDVDD
SYSPW48
AUXG
B. UP
USB5
LDE
T
AB , C
DEH-4000UB/XS/EW5DEH-3050UB/XS/ESDEH-3050UB/XU/CN5
A :B :C :
4
3
82
ROT0
ROT1
JOYST
E
D
CE
1
CE
2
SL
PEG475A:PEG409A:
A
FMRF
ANT adjRF adj
FM ANT
T51 CF52
RF
GN
D
OS
CG
ND
DG
ND
AU
DIO
GN
D
NC
VC
C
VD
D_3
.3
3.3V 2.5VIC4
3.3V 2.5V
IC22.5V
NC
CE
2
RO
M_V
DD SL DI
CK
CE
1
LDE
T
DO
RD
S_C
K
RD
S_D
AT
A
RD
S_L
OC
K
RD
S_H
SLK
7 6 13 5 10 9 8 11 14 18 19 20 21
1
3
2 12 15 22 16 4 17
IC13.3V
AM ANT FMRFATT
LPFOSC
IC3 EEPROM5.0V
IC55V 3.3V
ATT
MIXER, IF AMP DET, FM MPX,RDS DECODER
23Lch
FM/AM TUNER UNIT
→
→
PICKUP UNIT(P10.5)(SERVICE)
CD CORE UNIT(S10.5COMP2-USB)C
BRST,BRXEN,BSRQ
CN701
Q101
M
LASERDIODE
MONITORDIODE
S903DSCSNS
SPINDLEMOTOR
MCARRIAGEMOTOR
LOAD/
LD-
MD
15
5
HOLOGRAM UNIT
IC301BA5839FP IC201
PE5611B
RF-AMP, CD DECODER, MP3/WMA DECODER,
DIGITAL SERVO / DATA PROCESSOR CPU,USB HOST CONTROLLER
CDDRIVER
2VD
VD
13LOUT
9
CN101
16SOP
15SOM
18LCOP
17LCOM
21CLCONT
55LOUT
9CONT
TD,FD
AC,BD,E,F
SD,MD
S901HOME
S90412EJ
S9058EJ
LD+ 14
141LD
142PD
12EJ
CONT
CLCONT
HOME
8
9
20
41
VDD
1
VDD2
BDATA,BSCK
VDD
15
5
FOCUS ACT.TRACKING ACT.
FOP
TOP21 TOP
FOP
11 FOP14 TOP
21
14
8EJ7
DSCSNS10
16/RESET 8/RESET
88VREFREFO 133
REFOUT
33FOM FOM
12 FOM
44TOM TOM
13 TOM
22LOEJ LOEJ28
52
50
X201
XTAL
/XTAL16.93MHz
VDSENS11
VD
16
17
DP
DM4
5
DM
DP
2
1
X20548MHz
USBXTAL
/USBXTAL
VDD2
Q102
39/PUEN
VCC VDD2
DEH-4000UB/XS/EW5181 2 3 4
C
D
F
A
B
E
40MUTE
49WVDD
35DPDT
36KYDT
51MPW
19SENS
25
28
24
SYNC
BCTLFLG
B.UP
YSPW48
4
3
82
ROT0
ROT1
OYST
23Lch
5 6 7 8
FL−
FL+RL−RL+
BACK UP
GND
RR+
RR−
FR+
FR−
FL+
FL−
RL+
RL−ACCGND
BACKUP
B.REM
ACC
B.REM
BSENS
ASENS
B.UP
75
18
10Front_L
11Rear_L
ILM+
SWVDD
23
21
3
5
FL-
FL+
RL-
RL+
ACC
IN2_L
IN1_L7
FLIN14
RLIN12
22 4
POWER AMP
IC151PML018A
IC 301PAL007C
VDD
Q931
ELECTRONIC VOLUME/SOURCE SELECTOR
STBYMUTE
Q851
Q852
VST,VCK,VDT
TUNL
CDL
DPDT
KYDT
MUTEQ451
RCFL
Pre/SW_L
10
2
5
6
MUTEQ453
TELIN42
25
B.REM
BSENS
ASENS
TEL MUTEQ951
CN901
B.UP
CN351
SL
TUNPCE2
TUNPCE1
TUNPDI
TUNPDO
97
65
66
68
69
TUNPCK67
CE2
CE1
TUNPDO
TUNPDI
TUNPCK
DALMON47
BUP
6,20
Q353
SWL
FL
VDD
CN803
SL
14
TEL
B.UP
VCC FL- FL2
FL+ FL1
RL- RL2
RL+ RL1
BREM
14
8
6
5
7
16
9
11
15
14
8
6
5
7
16
9
11
15
2 IN5+_L
6
AUXL
ILM
DSENS
SWVDD
12
6
PEE 26
BZ601BUZZER
XIN
XOUT
15
X60115MHz13
IC401NJM2885DL1-33
13VCC
3.3V REGULATOR
VDD3.3V
Q351
5MUTE SWL
7
1
EN
VIN
FBINV
SW
652
IC251R5523N001B
1EN
3FLG
4VIN
5VOUT
US5V
IN5-_L1
VCC B.UP
VCC8.4V REGULATOR12 IC921
NJM2388F844
AUXGND
B. UP
Q841
Q842
USB5V REGULATORIC501
BD9781HFP
RCA OUT
11
13
Q402
Q401
RDS_CK
RDS_LOCK 76
RCK
77 RDSDT
73
RDS57K78
RDSLK
RDS_DATA
RDS_HSLK
LDETLDET
74
8
9
3
12
D
E
DM
DP
B , C
A
121VDD
RESETIC961
S-80835CNMC-B8U RESET2
SYSTEMCONTROLLER
IC 601(1/2)AB , C
PEG475A:PEG409A:
Q912
Q911VDD REGULATOR
JOYST
ROT0
ROT1
ROTARY COMMANDER
ILM+
SWVDD
LCD DRIVER/KEY CONTROLLER
IC1801PD6538A
10
2
14
CN1801
5DPDT
KYDT
IC1802GP1UX51RK
REMOTE CONTROLSENSOR
OPT IN3
1 57 REM
50
49
SI
SO
S1827
10
1Phase_A
Phase_B
X0
X1
54
X18015MHz55
6
46
47
V3
VDD
11
13
US5V
2
1
CN1802
DSENS
JOYST
KEY MATRIX
S1810
S1805 S1806RDM
S1809
S Rtrv
S1807
S1808
S1802 S1803 S1804S1801SOURSEEJECT LIST BAND/ESC
REGION1 DISP/BACK
REGION2 RPT
KS
T1-
4
KD
T1-
3
LCDLCD1801
ROT0
ROT18
9
3
(GREEN)(RED)
A , B C
ILLUMI
12 3
USDM
USDP
KEYBOARD UNITB
USB
B , C
A
DEH-4000UB/XS/EW5 195 6 7 8
C
D
F
A
B
E
1 2 3 4
No. Symbol I/O Explain1 AMANT I AM antenna input AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7 µH. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the hum of power transmission line.
2 RFGND RF ground Ground of antenna block3 FMANT I FM antenna input Input of FM antenna 75 ohm Surge absorber(DSP-201M-S00B)is necessary. 4 VCC power supply The power supply for analog block. D.C 8.4 V ± 0.3 V5 SL O signal level Output of FM/AM signals level6 CE2 I chip enable-2 Chip enable for EEPROM ”Low” active7 NC non connection Not used8 CE1 I chip enable-1 Chip enable for AF•RF ”High” active9 CK I clock Clock
10 DI I data in Data input11 LDET O lock detector “Low” active12 OSCGND osc ground Ground of oscillator block13 ROM_VDD power supply Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.14 DO O data out Data output15 DGND digital ground Ground of digital block16 NC non connection Not used17 VDD_3.3 power supply The power supply for digital block. 3.3 V ± 0.2 V18 RDS_CK O RDS clock Output of RDS clock(2.5 V)19 RDS_DATA O RDS data Output of RDS data(2.5 V)20 RDS_LOCK O RDS lock Output unit “High” active(2.5 V) (RDS_LOCK turns over by the
external transistor . “Low” active)21 RDS_HSLK O RDS high speed Output unit “High” active(2.5 V)(RDS_HSLK turns over by the
lock external transistor. “Low” active)22 AUDIOGND audio ground Ground of audio block23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output
FMRF
ANT adjRF adj
FM ANT
T51 CF52
RF
GN
D
OS
CG
ND
DG
ND
AU
DIO
GN
D
NC
VC
C
VD
D_3
.3
3.3V 2.5VIC 4
3.3V 2.5V
IC 22.5V
NC
CE
2
RO
M_V
DD SL DI
CK
CE
1
LDE
T
DO
RD
S_C
K
RD
S_D
ATA
RD
S_L
OC
K
RD
S_H
SLK
7 6 13 5 10 9 8 11 14 18 19 20 21
1
3
2 12 15 22 16 4 17
IC 13.3V
AM ANT FMRFATT
LPFOSC
IC 3 EEPROM5.0V
IC 55V t 3.3V
ATT
MIXER, IF AM P DET, FM MPX,RDS DECODER
24
23
Rch
Lch
- FM/AM Tuner Unit (EW5)
t
DEH-4000UB/XS/EW5201 2 3 4
C
D
F
A
B
E
5 6 7 8
No. Symbol I/O Explain1 AMANT I AM antenna input AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7 µH. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the hum of power transmission line.
2 RFGND RF ground Ground of antenna block3 FMANT I FM antenna input Input of FM antenna 75 ohm Surge absorber (DSP-201M-S00B) is necessary. 4 VCC power supply The power supply for analog block. D.C 8.4 V ± 0.3 V 5 SL O signal level Output of FM/AM signals level6 CE2 I chip enable-2 Chip enable for EEPROM ”Low” active7 NC non connection Not used8 CE1 I chip enable-1 Chip enable for AF•RF ”High” active9 CK I clock Clock
10 DI I data in Data input11 NC non connection Not used12 OSCGND osc ground Ground of oscillator block13 ROM_VDD power supply Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.14 DO O data out Data output15 DGND digital ground Ground of digital block16 NC non connection Not used17 VDD_3.3 power supply The power supply for digital block. 3.3 V ± 0.2 V 18 NC non connection Not used19 NC non connection Not used20 NC non connection Not used21 NC non connection Not used22 AUDIOGND audio ground Ground of audio block23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output
FMRF
ANT adjRF adj
FM ANT
T51 CF52
RF
GN
D
OS
CG
ND
DG
ND
AU
DIO
GN
D
NC
VC
C
VD
D_3
.3
3.3 V 2.5 V
IC 22.5 V
NC
CE
2
RO
M_V
DD SL DI
CK
CE
1
NC
DO
NC
NC
NC
NC
7 6 13 5 10 9 8 11 14 18 19 20 21
1
3
2 12 15 22 16 4 17
IC 13.3 V
AM ANT FMRFAT T
LPFOSC
IC 3 EEPROM5.0 V
IC 55 V 3.3 V
AT T
MIXER, IF AM P DET, FM MPX
24
23
Rch
Lch
- FM/AM Tuner Unit (ES, CN5)
DEH-4000UB/XS/EW5 215 6 7 8
C
D
F
A
B
E
1 2 3 4
- LCD(YAW5091)
SE
GM
EN
T
CO
MM
ON
DEH-4000UB/XS/EW5221 2 3 4
C
D
F
A
B
E
5 6 7 8
5. DIAGNOSIS5.1 OPERATIONAL FLOWCHART
SWVDD
Vcc = 5 VPin 16
Power ON
bsens = L
DSENS = L
bsensPin 18
asensPin 75
asens = L
DSENSPin 19
HPin 49
Source keys operative
Completes power-on operation.(After that, proceed to each source operation.)
SYSPW HPin 48
ASENBO HPin 40
Starts communication with Grille microcomputer.
Source ON
300 ms
300 ms
In case of the above signal, the communication with Grille microcomputer may fail.If the time interval is not 300 msec, the oscillator may be defective.
DEH-4000UB/XS/EW5 235 6 7 8
C
D
F
A
B
E
1 2 3 4
5.2 ERROR CODE LIST
- Error Messages
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing.
(1) Basic Indication Method
1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before.
2) Head unit display examples
Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.
8-digit display 6-digit display 4-digit display
ERROR-xx ERR-xx E-xx
(2) Error Code List
Code Class Displayed error code Description of the code and potential cause(s)
10 Electricity Carriage Home NG CRG can't be moved to inner diameter.
SERVO LSI Com- CRG can't be moved from inner diameter.
munication Error -> Failure on home switch or CRG move mechanism.
Communication error between microcomputer and SERVO LSI.
11 Electricity Focus Servo NG Focusing not available.
-> Stains on rear side of disc or excessive vibrations on REWRITABLE.
12 Electricity Spindle Lock NG Spindle not locked. Sub-code is strange (not readable).
Subcode NG -> Failure on spindle, stains or damages on disc, or excessive vibrations.
A disc not containing CD-R data is found.
Turned over disc are found, though rarely.
CD signal error.
17 Electricity Setup NG AGC protection doesn't work. Focus can be easily lost.
-> Damages or stains on disc, or excessive vibrations on REWRITABLE.
30 Electricity Search Time Out Failed to reach target address.
-> CRG tracking error or damages on disc.
44 Electricity ALL Skip Skip setting for all track.
(CD-R/RW)
50 Mechanism CD On Mech Error Mechanical error during CD ON.
-> Defective loading motor, mechanical lock and mechanical sensor.
A0 System Power Supply NG Power (VD) is ground faulted.
-> Failure on SW transistor or power supply (failure on connector).
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.
DEH-4000UB/XS/EW5241 2 3 4
C
D
F
A
B
E
5 6 7 8
Message Cause Action
USB error
No songs in the USB device Transfer the songs to the USB device.
USB memory with security enabled isconnected
Follow the USB memory instructions to disablethe security.
TRK SKIPPEDThe connected USB device contains WMAfiles that are protected by DRM
Play an audio file not protected by DRM.
PROTECTAll the files in the USB device are protectedby DRM
Transfer the songs not protected by DRM tothe USB device.
N/A USBThe connected USB device is not supportedby this unit
Connect a USB device that is compliant as aMass Storage Class.
The USB connector or the USB cable isshort-circuited
Confirm the USB connector or the USB cable.
The connected USB device consumes morethan 500 mA (max. allowable current)
Confirm the USB device.
Turn the ignition switch OFF and ON.
Disconnect the USB device, and connect itagain.
Change to a different source. Then, return tothe USB.
ERROR-23USB device is not formatted with FAT16 orFAT32
Format the USB device with FAT16 or FAT32.
Communication failureERROR-19
NO AUDIO
CHK USB
DEH-4000UB/XS/EW5 255 6 7 8
C
D
F
A
B
E
1 2 3 4
5.3 CONNECTOR FUNCTION DESCRIPTION
EW5
ES,CN5
POWER SUPPLY
1. FR+ 2. RR+ 3. FR- 4. RR- 5. FL+ 6. RL+ 7. FL- 8. RL-
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
9. TEL 10. NC 11. B.REM 12. NC 13. NC 14. ACC 15. GND 16. B.UP
POWER SUPPLY
1. FR+ 2. RR+ 3. FR- 4. RR- 5. FL+ 6. RL+ 7. FL- 8. RL-
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
9. TEL 10. NC 11. B.REM 12. NC 13. NC 14. ACC 15. GND 16. B.UP
ANTENNA
ANTENNA
WIRED REMOTE INPUT
AUX
AUX
FRONT OUTPUT
REAR OUTPUT OR SUBWOOFER OUTPUT
REAR OUTPUT OR SUBWOOFER OUTPUT
DEH-4000UB/XS/EW5261 2 3 4
C
D
F
A
B
E
5 6 7 8
6. SERVICE MODE6.1 CD TEST MODE
1) Cautions on adjustments In this product the single voltage (3.3 V) is used for the regulator. The reference voltage is the REFO1 (1.65 V) instead of the GND.If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servo’s misoperation will apply excessive shock to the pickup. To avoid such problems:a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state.c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately.
Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator.
For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on.
In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment.
The RFI and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series.
The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it.
2) Test modeThis mode is used to adjust the CD mechanism module. To enter the test mode.While pressing the SOURCE and RPT keys at the same time, reset. To exit from the test mode.Turn off the ACC and back up.
Notes:a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected.b. If you have pressed the (->) key or (<-) key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck.c. For the TR jump modes except 100TR, the track jump operation will continue even if the key is released.d. For the CRG move and 100TR jump modes, the tracking loop will be closed at the same time when the key is released.e. When the power is turned off and on, the jump mode is reset to the single TR (91), the RF amp gain is set to 0 dB, and the auto-adjustment values are reset to the default settings.
DEH-4000UB/XS/EW5 275 6 7 8
C
D
F
A
B
E
1 2 3 4
• How to issue the 1 - 6 keys in the 08 model's slave test:
The specification of the 08 model does not include the 1 - 6 keys issuance function for H/U and the remote control unit. Therefore, in order to issue commands in a slave test, use the direct FUNCTION keys alternatively to enable the equal key command sending function to the existing models.
Outline) Use the direct FUNCTION keys to display, select, or issue the KEY 1 - 6.
<Direct FUNCTION keys and corresponding functions>
• For convenience, a name of each direct FUNCTION key is shown as "A", "B", and "C".
• How to issue the 1 - 6 keys for the CDS source:(The areas below are overwritten and displayed on character strings for the normal mode display.)
1 During the slave test mode, the key name "K1" is shown at the left by default.In this condition, press the A key to toggle K1 - K6, and select a command to be sent to the slave.
C O M P A C T D I S C
K 1 ! T - ! ! ! ! ! ! • The one-line model shows only the bottom column.DNOCESETUNIMKRTREDLOF
C O M P A C T D I S C
K 6 T
2 During the K1 - K6 key names are displayed, press the B key and issue the selected command.
C O M P A C T D I S C Send a key command selected by K 1 T pressing the KEY 1.
B key
3 Press the C key to change display/non-display of key names.When the non-display mode is selected for the K1 - K6 key names, "A key" and "B key" are invalid.
C O M P A C T D I S C
K 1 T
C key
C O M P A C T D I S C
F - ! T • Pressing the A key or B key does not work.
RDM/SHFL/FUNC2 Issuing a key commandC Switching a screen B
Direct FUNCTION key Normal mode Slave test modeA Selecting a key command
LOCAL/RPT/FUNC3
ASR/SAT/FUNC1
! - ! ! ! ! ! !
! - ! ! ! ! ! !
! - ! ! ! ! ! !
! - ! ! ! ! ! !
A key
DEH-4000UB/XS/EW5281 2 3 4
C
D
F
A
B
E
5 6 7 8
[Key]
Contents
Display
[SOURCE] + [RPT] + Reset or[SOURCE] + [RPT] + BU + ACC
Test Mode In
[CD] or [SOURCE]
Source On
TRK MIN SEC
[BAND]
Power On(T.Offset is adjusted)TRK MIN SEC00 00 00
[3]
Power On(T.Offset is not adjusted)
99 99 99
[2]
RF AMPGain switching
GG GG GG
*1[4]
SPINDLESpeed switching
SP SP SP
*9
[3]
Focus CloseS curve check
TRK MIN SEC91 91 91
[6]
Focus Mode switching
0X 0X 0X
*2
[1]
Tracking ServoClose
00 00 00or 99 99 99
[>]
CRG +
[2]
Self-adjustingswitching
TRK MIN SEC?? ?? ??
*3*8
[<]
CRG -*8
[BAND]
Power Off
TRK MIN SEC
[BAND]
Power Off
TRK MIN SEC
[BAND]
Power Off
TRK MIN SEC
[BAND]
Power Off
TRK MIN SEC
[1]T.Close & AGC
Applicable servomechanism
TRK MIN SEC?tr ?min ?sec
[6] [3]
RF AGC /RF AGC coefficient display
[>]
CRG +
8X 8X 8Xor 9X 9X 9X
[2]
T.Balance adjustment /T.BAL coefficient display
TRK MIN SEC?? ?? ??
[<]
CRG -T.CloseApplicable servomechanism
?? ?? ??
[1]
F,T,RF AGCF.Bias display switchingTRK MIN SEC
TRK MIN SEC
TRK MIN SEC
TRK MIN SEC?tr ?min ?sec
TRK MIN SEC
[3] [6]
CRG/TR jumpvalue switching
[>]
CRG/TR Jump +
[2]
Tracking Open
[<]
CRG/TR Jump -
?tr ?min ?sec
TRK MIN SEC
TRK MIN SEC
TRK MIN SEC?tr ?min ?sec
00 00 00or 99 99 99
TRK MIN SEC
TRK MIN SEC?tr ?min ?sec
8X 8X 8Xor 9X 9X 9X
8X 8X 8Xor 9X 9X 9X
00 00 00or 99 99 99
TRK MIN SEC?tr ?min ?sec?? ?? ??
*7 F,T AGC / F.BiasRF AGC
8X 8X 8Xor 9X 9X 9X
[2]
Tracking Open
*6
*5 *4 *4
Operation[Key] Test Mode
[BAND] Power On/Off[>] CRG + / TR Jump +
(Direction of the external surface)[<] CRG - / TR Jump -
(Direction of the internal surface)[1] T. CLS & AGC & Applicable servomechanism /
AGC,AGC display setting[2] RF Gain switching / Offset adjustment display /
T.Balance adjustment / T. Open[3] F. Close,S Curve / Rough Servo and RF AGC /
F,T,RF AGC[4] SPDL 1X/2X switching
As for the double speed(2x), audio output cannot besupported.
[5] Error Rate measurementON : ERR 30 Counts StartBER display data[%]
[6] F. Mode switching / Tracking Close / CRG•TRJump Switching
• As for the double speed (2x), audio output cannot be supported• After the [Eject] key is pressed keys other than the [Eject] key should not be pressed, until disc ejection is complete.• When the key [2] or [3] is pressed during the Focus Search, the power supply should be immediately turned off (otherwise the lens
sticks to Wall, causing the actuator to be damaged).• In the case of TR jump other than to 100TR, the function shall continue to be processed even if the TR jump key is released. As for
the CRG Move and 100TR Jump, the mechanism shall be set to the Tracking Close mode when the key is released.• When the power is turned on/off the jump mode is reset to the Single TR (91) while the gain of the RFAMP is reset to 0 dB. At the
same time all the self-adjusting values shall return to the default setting.
*10
TRK MIN SEC
[5]
Gop ModeGop Mode switching
OL OL OL
- Flow Chart
*1) TYP -> + 6 dB -> + 12 dB TRK MIN SEC TRK06MIN06SEC06 TRK12MIN12SEC12
*2) Focus Close -> S.Curve -> F EQ measurement setting TRK00MIN00SEC00
TRK01MIN01SEC01 TRK02MIN02SEC02 (TRK99MIN99SEC99)
*3) F.Offset Display -> RF.Offset -> T.Offset Display -> Switch to the order of the original display
*4) 1TR/4TR/10TR/32TR/100TR*5) Single -> 4TR -> 10TR -> 32TR -> 100TR -> CRG Move 9x(8x):91(81) 92(82) 93(83) 94(84) 95(85) 96(86)
*6) Only at the time of CRG move, 100TR jump
*7) TRK/MIN/SEC -> F.AGC -> T.AGC Gain -> F Bias -> RF AGC
*8) CRG motor voltage = 2 [V]
*9) TYP (1X) -> 2X -> 1X TRK MIN SEC
TRK22MIN22SEC22 TRK11MIN11SEC11*10) OFF(TYP) -> FORCUS -> TRACKING TRK MIN SEC
TRK70MIN70SEC70 TRK71MIN71SEC71
DEH-4000UB/XS/EW5 295 6 7 8
C
D
F
A
B
E
1 2 3 4
7. DISASSEMBLY
Fig.1
Fig.2
- Removing the Keyboard Unit (Fig.1)
- Removing the Holder (Fig.2)
1 Remove the four screws.
Remove the Coverand then remove the Keyboard Unit.
Take off the pick of left and rightand then a holder slide to the arrow course.
Cover
Fig.3
- Removing the Case and Panel (Fig.3,4)
Remove the Case.(Fig.3)
Case
Fig.4
Holder
Pick
PanelTake off four picks of the part of the arrowand then remove the Panel.(Fig.4)
1 1
11
DEH-4000UB/XS/EW5301 2 3 4
C
D
F
A
B
E
5 6 7 8
Fig.7
- Removing the Panel Assy (Fig.5,6)
Fig.5
Push the place of the arrowsand then remove the Panel Assy.
Fig.6
Panel Assy
- Removing the CD Mechanism Module (Fig.7)
Disconnect the cableand then remove the CD Mechanism Module.
Remove the four screws.
CD Mechanism Module
1
1
1
1
1
DEH-4000UB/XS/EW5 315 6 7 8
C
D
F
A
B
E
1 2 3 4
- Removing the Tuner Amp Unit (Fig.8,9)
Fig.8
Fig.9
Remove the three screws.(Fig.8)
2
3
Straighten the tabs at four locationsindicated.(Fig.9)
Remove the screwand then remove the Tuner Amp Unit.(Fig.9)
Tuner Amp Unit
1
1
1
2 2 2
23
1
DEH-4000UB/XS/EW5321 2 3 4
C
D
F
A
B
E
5 6 7 8
A
A
B
B
B
B
B
a
B
Upper Frame
Lower FrameDamper
Carriage Mechanism
Damper
Do not squeeze this area.
- How to hold the Mechanism Unit
- Removing the Upper and Lower Frames1. With a disc inserted and clamped in the
mechanism, remove the two Springs (A), the six Springs (B), and the four Screws.
2. Turn the Upper Frame using the part "a" as a pivot, and remove the Upper Frame.
3. While lifting the Carriage Mechanism, remove it from the three Dampers.
Caution: When assembling, be sure to apply some alcohol to the Dampers and assemble the mechanism in a clamped state.
1. Hold the Upper and Lower Frames.2. Do not hold the front portion of the Upper
Frame, because it is not very solid.
DEH-4000UB/XS/EW5 335 6 7 8
C
D
F
A
B
E
1 2 3 4
Screw
Shorting Solder
CD Core Unit
Solder
- How to remove the CD Core Unit1. Apply Shorting Solder to the flexible cable of
the Pickup, and disconnect it from the connector.
2. Unsolder the four leads, and loosen the Screw.
3. Remove the CD Core Unit.Caution: When assembling the CD Core Unit,
assemble it with the SW in a clamped state so as not to damage it.
Chassis
Pickup Rack
Pickup
Poly WasherChange Arm
Pickup Lock Arm
Feed Screw
Inner Holder
Planet Gear
- How to remove the Pickup Unit1. Make the system in the carriage mechanism mode, and have it clamped.2. Remove the CD Core Unit and remove the leads from the Inner Holder.3. Remove the Poly Washer, Change Arm, and Pickup Lock Arm.4. While releasing from the hook of the Inner Holder, lift the end of the Feed Screw.Caution: When assembling, move the Planet Gear to the load/eject position before setting the Feed Screw in the Inner
Holder.Assemble the sub unit side of the Pickup, taking the plate (Chassis) in-between. When treating the leads of the Load
Carriage Motor Assy, do not make them loose over the Feed Screw.
DEH-4000UB/XS/EW5341 2 3 4
C
D
F
A
B
E
5 6 7 8
8. EACH SETTING AND ADJUSTMENT8.1 PCL OUTPUT CONFIRMATION
- PCL OutputIn the normal operation mode (with the detachable panel installed, the ACC switched ON, the standby modecancelled), shift the TESTIN IC601(Pin 63) terminal to H.The clock signal is output from the PCL terminal IC601(Pin 39).The frequency of the clock signal is 468 750 Hz that is one 32th of the fundamental frequency.The clock signal should be 468 750 Hz (-10 Hz, +15 Hz)If the clock signal out of the range, the X’tal (X601) should be replaced with new one.
DEH-4000UB/XS/EW5 355 6 7 8
C
D
F
A
B
E
1 2 3 4
8.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
CD CORE UNIT
Note :The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below.
Purpose :To check that the grating is within an acceptable range when the PU unit is changed.
Symptoms of Mal-adjustment :If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching.
Method :
Measuring Equipment Measuring Points
Oscilloscope, Two L.P.F. E, F, REFO1
Disc TCD-782 Mode TEST MODE
Checking Procedure1. In test mode, load the disc and switch the 3 V regulator on.2. Using the -> and <- buttons, move the PU unit to the innermost track.3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the fourth press.4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75 degrees. Refer to the photographs supplied to determine the phase angle.5. If the phase difference is determined to be greater than 75 degrees try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75 degrees then the mechanism should be judged to be at fault. NoteBecause of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle.
HintReloading the disc changes the clamp position and may decrease the "wobble".
100 kohm
390 pF
100 kohm
390 pF
E
VREF
F
VREF
Xch Ych
L.P.F.
L.P.F.
Oscilloscope
FE
REFO1
DEH-4000UB/XS/EW5361 2 3 4
C
D
F
A
B
E
5 6 7 8
Grating waveform
45 degrees
0 degrees
75 degrees
60 degrees
30 degrees
90 degrees
Ech -> Xch 20 mV/div, ACFch -> Ych 20 mV/div, AC
DEH-4000UB/XS/EW5 375 6 7 8
C
D
F
A
B
E
1 2 3 4
9. EXPLODED VIEWS AND PARTS LIST
9.1 PACKING
NOTES : Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List. The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.)
""
DEH-4000UB/XS/EW5381 2 3 4
C
D
F
A
B
E
5 6 7 8
(1) PACKING SECTION PARTS LIST
(2) CONTRAST TABLEDEH-4000UB/XS/EW5, DEH-3050UB/XS/ES and DEH-3050UB/XU/CN5 are constructed the same except for the following:
Owner's Manual,Installation Manual
Mark No. Description Part No.
1 Cord Assy See Contrast table(2)
2 Polyethylene Bag See Contrast table(2)
* 3 Attachment Assy See Contrast table(2)
4 Screw See Contrast table(2)
5 Screw Assy CEA3849
6 Screw CBA1650
* 7 Polyethylene Bag CEG-127
8 Screw CRZ50P090FTC
9 Screw TRZ50P080FTC
10 Polyethylene Bag CEG1160
11 Handle CND3707
12 Bush CNV3930
13 Unit Box See Contrast table(2)
14 Contain Box See Contrast table(2)
15 Protector YHP5039
16 Protector YHP5040
17 Case Assy YXB5009
18-1 Owner's Manual See Contrast table(2)
18-2 Owner's Manual See Contrast table(2)
18-3 Owner's Manual See Contrast table(2)
18-4 Owner's Manual See Contrast table(2)
18-5 Installation Manual See Contrast table(2)
* 18-6 Warranty Card See Contrast table(2)
18-7 Caution Card See Contrast table(2)
19 Grip YNV5150
20 Cord Assy See Contrast table(2)
21 Remote Control Assy See Contrast table(2)
* 22 Battery See Contrast table(2)
23 Cord Assy See Contrast table(2)
Mark No. Description Part No.
Mark No. Description DEH-4000UB/XS/EW5 DEH-3050UB/XS/ES DEH-3050UB/XU/CN5
1 Cord Assy CDP1015 Not used Not used
2 Polyethylene Bag CEG-162 CEG1373 CEG1373
* 3 Attachment Assy YEA5036 YEA5037 YEA5037
4 Screw BPZ20P060FTC Not used Not used
13 Unit Box YHG5400 YHG5402 YHG5406
14 Contain Box YHL5400 YHL5402 YHL5410
18-1 Owner's Manual YRB5071 YRD5184 YRB5072
18-2 Owner's Manual YRD5180 YRD5185 Not used
18-3 Owner's Manual YRD5181 Not used Not used
18-4 Owner's Manual YRD5182 Not used Not used
18-5 Installation Manual YRD5189 YRD5190 Not used
* 18-6 Warrnty Card CRY1265 Not used ARY7046
18-7 Caution Card Not used CRP1310 CRP1310
20 Cord Assy Not used Not used YDP5011
21 Remote Control Assy Not used CXC8885 CXC8885
* 22 Battery Not used CEX1065 CEX1065
23 Cord Assy Not used CDP1017 CDP1017
Part No. Language
YRD5180 English, SpanishYRD5181 German, French
YRD5182 Italian, Dutch
YRB5071 Russian
YRD5189 English, Spanish, German, French, Italian, Dutch, RussianYRD5184 English, Spanish, Portuguese(B)YRD5185 Traditional Chinese, Arabic
YRD5190 English, Spanish, Portuguese(B), Traditional Chinese, Arabic
YRB5072 Simplified Chinese
DEH-4000UB/XS/EW5 395 6 7 8
C
D
F
A
B
E
1 2 3 4
9.2 EXTERIOR(1)
A
A
A
DEH-4000UB/XS/EW5401 2 3 4
C
D
F
A
B
E
5 6 7 8
(1) EXTERIOR(1) SECTION PARTS LIST
(2) CONTRAST TABLEDEH-4000UB/XS/EW5, DEH-3050UB/XS/ES and DEH-3050UB/XU/CN5 are constructed the same except for the following:
<NOTE> Sheet, #4 has to be replaced if it is removed.
Mark No. Description Part No.
1 Screw BSZ26P060FTC
2 Screw BSZ30P060FTC
3 Screw BSZ30P200FTC
4 Sheet See Contrast table(2)
5 Earth Plate CNC8915
6 Cushion CNM8890
7 CD Mechanism Module(S10.5) CXK5771
8 Cable YDE5030
9 Insulator YNM5062
10 Chassis Unit See Contrast table(2)
11 Button(DETACH) CAC4836
12 Spring CBH2367
13 Spring CBH2961
14 Spring CBH2962
15 Cover CNN1665
16 Arm CNV9311
17 Arm CNV9312
18 Panel YNS5305
19 Tuner Amp Unit See Contrast table(2)
20 Screw BPZ26P080FTC
21 Screw BSZ26P060FTC
22 Screw BSZ26P200FTC
23 •••••
24 Pin Jack(CN351) See Contrast table(2)
25 Plug(CN901) CKM1376
26 Connector(CN701) CKS3833
27 Connector(CN803) CKS5664
28 Antenna Jack(CN401) CKX1056
29 FM/AM Tuner Unit(Y401) See Contrast table(2)
30 Holder CND4324
31 •••••
32 Holder XNC7030
> 33 Fuse(10 A) YEK5001
34 Jack(CN621) See Contrast table(2)
35 Holder See Contrast table(2)
36 Heat Sink YNR5031
37 IC(IC301) PAL007C
38 IC(IC921) NJM2388F84
39 Transistor(Q702, Q911) 2SD2396
Mark No. Description Part No.
Mark No. Description DEH-4000UB/XS/EW5 DEH-3050UB/XS/ES DEH-3050UB/XU/CN5
NOTE 4 Sheet Not used Not used CNM9404
10 Chassis Unit YXA5359 YXA5196 YXA5196
19 Tuner Amp Unit YWM5203 YWM5205 YWM5207
24 Pin Jack(CN351) CKB1057 CKB1051 CKB1051
29 FM/AM Tuner Unit (Y401) CWE2097 CWE2098 CWE2098
34 Jack (CN621) YKS5001 YKS5017 YKS5017
35 Holder YNC5054 YNC5055 YNC5055
DEH-4000UB/XS/EW5 415 6 7 8
C
D
F
A
B
E
1 2 3 4
9.3 EXTERIOR(2)
B
DEH-4000UB/XS/EW5421 2 3 4
C
D
F
A
B
E
5 6 7 8
(1) EXTERIOR(2) SECTION PARTS LIST
(2) CONTRAST TABLEDEH-4000UB/XS/EW5, DEH-3050UB/XS/ES and DEH-3050UB/XU/CN5 are constructed the same except for the following:
Mark No. Description Part No.
1 Holder CND3598
2 Remote Control Assy See Contrast table(2)
3 Cover See Contrast table(2)
4 Cord Assy See Contrast table(2)
5 Case YNB5014
6 Panel YNS5307
7 Detachable Assy See Contrast table(2)
8 Screw BPZ20P100FTB
9 Spring CBH2210
10 Button(TA/NEWS) YAC5256
11 Button(EJECT) YAC5258
12 Button(DETACH) YAC5259
* 13 Plate YNS5295
14 Cover YNS5304
15 Lighting Conductor YNV5137
16 Connector(CN1801) CKS5663
17 LCD (LCD1801) YAW5091
18 Connector(CN1802) YKS5027
19 Holder YND5015
20 Sheet YNM5105
21 Lighting Conductor YNV5136
22 Connector YNV5140
23 Grille Unit See Contrast table(2)
24 Knob Unit(MULTI-CONTROL) See Contrast table(2)
25 Spring YBL5013
26 Button Unit (SRC/OFF, DISP/ See Contrast table(2) BACK/SCRL, BAND/ESC, MUTE)
27 Cushion See Contrast table(2)
28 IC(IC1802) See Contrast table(2)
29 Cord Assy See Contrast table(2)
30 Pin See Contrast table(2)
Mark No. Description Part No.
Mark No. Description DEH-4000UB/XS/EW5 DEH-3050UB/XS/ES DEH-3050UB/XU/CN5
2 Remote Control Assy Not used CXC8885 CXC8885
3 Cover Not used CNS7068 CNS7068
4 Cord Assy Not used CDP1017 CDP1017
7 Detachable Assy YXA5353 YXA5354 YXA5355
23 Grille Unit YXA5345 YXA5346 YXA5346
24 Knob Unit(MULTI-CONTROL)
YXA5350 YXA5351 YXA5351
26 Button Unit(SRC/OFF, DISP/BACK/
SCRL, BAND/ESC, MUTE)
YXA5364 YXA5365 YXA5365
27 Cushion Not used YNM5029 YNM5029
28 IC(IC1802) Not used GP1UX51RK GP1UX51RK
29 Cord Assy CDP1015 Not used Not used
30 Pin CKX-003 Not used Not used
DEH-4000UB/XS/EW5 435 6 7 8
C
D
F
A
B
E
1 2 3 4
9.4 CD MECHANISM MODULE
BB
C
A
B
C
D
E
519
A
19
5
55
19
19
27
482913
1366
44
44
72
8
15
60
4633
6238
39
40
28
4 4717
37
1412
35
6
45
52 53
65
64
18
32
415
61
498
51
55
51
56
59
43 10
20
57
16
25
58
31
23
69
71 70
7063
73
21
7
19
24
19
2467
436
68 50
(1)
(1)
(1)
(1)
(1)
(1)
(1)
E
30
3422
42
11 26(1)(1)
(1)
(1)
(1)
(1)(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(1)
(1)
(2)
(1)
(2)
(1)
(1) : GEM1024
: GEM1045(2)
(2)
1
23
74
D
C
549
9
(1)
(2)
(2)
DEH-4000UB/XS/EW5441 2 3 4
C
D
F
A
B
E
5 6 7 8
CD MECHANISM MODULE SECTION PARTS LIST
Mark No. Description Part No.
1 CD Core Unit(S10.5COMP2-USB) CWX3527
2 Connector(CN101) CKS4911
3 Connector(CN701) CKS4915
4 Screw BMZ20P025FTC
5 Screw BSZ20P040FTC
6 Screw(M2 x 3) CBA1511
7 Screw(M2 x 4) CBA1835
8 Washer CBF1038
9 Roller CNV9499
10 Spring CBH2609
11 Spring CBH2612
12 Spring CBH2614
13 Spring CBH2616
14 Spring CBH2617
15 Spring CBH2620
16 Spring CBH2855
17 Spring CBH2937
18 Spring CBH2735
19 Spring CBH2854
20 Spring CBH2642
21 Spring CBH2856
22 Spring CBH2857
23 Spring CBH2860
24 Spring CBH2861
25 Spring CBL1686
26 Arm CND1909
27 Frame CND2582
28 Bracket CND2583
29 Arm CND3831
30 Lever CND2585
31 Arm CND2586
32 Bracket CND2587
33 Arm CND2588
34 Lever CND2589
35 Holder CNV9522
36 Gear CNV7207
37 Gear CNV9513
38 Gear CNV7209
39 Gear CNV9514
40 Gear CNV9515
41 Gear CNV9516
42 Rack CNV9517
43 Arm CNV7216
44 Roller CNV8189
45 Gear CNV9518
46 Guide CNV9519
47 Gear CNV7595
48 Guide CNV9520
49 Arm CNV7805
50 Rack CNV8342
51 Roller CNV8343
52 Holder CNV8344
53 Arm CNV8345
54 Guide CNV9498
55 Arm CNV8348
56 Arm CNV8349
57 Arm CNV8350
58 Clamper CNV8365
59 Arm CNV8386
60 Guide CNV8396
61 Arm CNV9521
62 Collar CNV8447
63 Motor Unit(M2) CXC4026
64 Arm Unit CXC4027
65 Chassis Unit CXC4028
66 Gear Unit CXC4029
67 Frame Unit CXC4031
68 Motor Unit(M1) CXC7134
69 Screw Unit CXC6359
70 Screw JFZ20P025FTC
71 Screw JGZ17P022FTC
72 Washer YE20FTC
73 Pickup Unit(P10.5)(Service) CXX1942
74 Screw IMS26P030FTC
Mark No. Description Part No.
DEH-4000UB/XS/EW5 455 6 7 8
C
D
F
A
B
E
TU
NL
AU
XL
C15
61
C60
4
1
10/1
6
C60
5
GND
R
IN5+
_L2
IN4+
_L3
IN4-
_L4 5
IN3_
L
6IN
2_L
23IN
1R
24IN
2_R
25IN
3_R
26IN
4-_R
27IN
4+_R
IN5+
_R1K
C15
5R
22
VC
C1
1 2 3 4
10. SCHEMATIC DIAGRAM10.1 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
A-a
A
A-a A-b
A-a A-b
A-bA-a
Large sizeSCH diagram
Guide page
Detailed page
Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".
RDS-HSLK
RDS-CK
RDS-LOCK
RDS-DATA
TUNPDO
TUNPCKCE1
TUNPDILDET
CE2
VD
CO
NT
/BS
RQ
/BR
ST
BS
CK
BR
XE
N
BD
AT
A
CD
RS
T
TU
NR
AU
XR
RO
T1
RO
T0
TX
VD
CO
NT
KYDT
ASENBO
SYSPW
DALMON
RX
RX
RS
T
CE
1
CE
2
VS
T
VC
K
BDATABDATA
DPDT
SL
/BS
EN
S
FLG
CD
RS
T
BSCK
MUTE
TELIN
/BRST
BRXEN
/BSRQ
SWVDD
OELPW
ILM
PW
IPP
W
VD
T
TU
NP
CK
TU
NP
DO
TU
NP
DI
/AS
EN
S
RD
S-L
OC
K
RD
S-D
AT
A
LDE
T
US
BC
TL
SY
NC
RD
S-H
SLK
KEY1
ANTPW
ILM
PW
RD
S-C
K
ISE
NS
FLG
US
DP
US
DM
KEY2
KEY1
/DS
EN
S
AUXR
AUXL
USBCTL
SYNC
AU
XG
ND
AUXGND
GN
D
ILM2
TUNR
TUNL
Y401
1AM_ANT
2RF_GND
3FM_ANT
4VCC
5SL
6CE2
7WC
8CE1
9CK
10DI
11LDET
12OSCGND
13ROM_VDD
14DO
15DGND
16COMP
17VDD_3.3
18RDS_CK
19RDS_DATA
20RDS_LOCK
21RDS_HSLK
22BEGND
23Lch
24Rch
UM
H1N
Q40
1E
11
B1
2
C2
3E
245
B2
6C
1
UM
H1N
Q40
2E
11
B1
2
C2
3E
245
B2
6C
1
R40
8
22K
R40
9
22K
R41
0
22K
R41
1
22K
R413 220
R415 220
R402
680R403
680 R404
680R405
680
R406
680
R421 0R0
R407
C40
2R
01
C40
3
R01
C40
6
R1
C41
1
47P
C40
7
R01
C41
0
R47
C40
4
4R7
L401
L403
L402
CN401
1
2
3
ZNR401
IMSA-6801-01Y901
22/1
0
C40
8
100/
10
C40
5
VC
C
VC
C
GND
GND
VD
D
GND
GND
GND
GND
R84
2
4R7K
2SA1036KQ841
RT1N141M-11Q842
GND
R841
10K
R816
1
B.U
P
C704
1
C705
1
GND
R70
8
220
R71
0
220
R71
2
220
R71
3
220
GND
NJM
2885
DL1
-33
IC70
2
1IN
2G
ND
3O
UT
C70
91
22/1
0
C70
8
C71
0
R47
GND
GND
Q7022SD2396
100/
10
C70
3
C70
1
R04
7
D70
1H
ZS
7L(C
3)
GND
Q701
RT3T22M
2E 1
2B 2
1C 31E
4
51B
62C
R701
270
R703
4R7KR704
100KR705
4R7KR706
100KR714
100K
R707
100K
GND C15
4
1
C15
91
CPV1062
BZ601
11
22
GND
R618
1K
R61
6
47K
R60
2
10K
C60
1
18P
C60
2
18P
R96
7
1K
GND
R60
4
680
R60
7
680
C609
47P
R60
3
10K
VDD
GND
GND
GND
R80
8
100K
R804
2R2K
R815
1K
R81
3
100K
VDD
R81
1
47K
R84
9
10K
NJM2885DL1-33IC401
1IN
2G
ND
3O
UT
CN8031
2
3
4
5
6
7
8
9
10
11
12
13
14
CN701
12345678910111213141516171819
GND
C25
2
R1
VDD
C25
1
R1
R25
7
10K
IC25
1
R55
23N
001B
EN
1
GN
D2
FLG
3V
IN45
VO
UT
GND
GND
GND
GND
C50
4
1
R50
6
68K
R503
33K
R511
470
R502
33K
R50
5
8R2K
D50
1
RB
060L
-40
C50
5
100P
GND
B.UP
R61
0
47K
GNDR
605
680
R61
9
0R0
R61
7
47K
R51
0
82K
IC15
1
IN5-
_L1
28
47/6
R3
C40
1
R71
1
220
C50
6
3300
P
C503
220P
C50
7
R1
RCH
LCH
BEG
RHSLK
RLK
RDAT
RCK
T3V
TUNG
DO
T5V
OSCG
LDET
DI
CK
CE1
CE2
SL
T8V
FM
RFG
AM
FLG
USBCTL
SYNC
RT
SWBFV5BSU
INV
VD
BS
RQ
BR
ST
BS
CK
BR
XE
N
BD
AT
A
CD
RS
T
CD
VD
D
UG
CD
R
AG
CD
L
PG
DP
DM
USGND3
R62
6
22K
AUXLCN621
2
4
1
3
56
R62
7
AUXGND
R62
8
100K
WREM1
R621 1K
R62
9
100K
R622
1K
WREM2
C62
147
00P
C62
2
4700
P
GND
WREMG
AUXR R62
522
K
RS
T
PCL
TEST
SW5V
TP1
TP2
DPDT
KYDT
IMG
TP3
TP4
ILMB
TP5
TP6
TP7
DSEN
DG
US5V
GND
R83
6
0R0
GND
B.UP
C15
3R
22
D621
EZJZ1V270RMD622
EZJZ1V270RMD623
EZJZ1V270RM
R414
4R7(1/4W)
X601
YSS5002
R631
100 R632
100
R814
1K
R70
9
1K
D50
2
S56
88G
C62
3
R1
BD9781HFPIC501
1V
IN2
SW
3R
T4
GN
D5
FB
6IN
V7
EN
R401
680
D80
9
EZ
JZ1V
270R
M
D81
0E
ZJZ
1V27
0RM
D80
1E
ZJZ
1V27
0RM
D80
2
EZ
JZ1V
270R
M
D80
3E
ZJZ
1V27
0RM
D80
4
EZ
JZ1V
270R
M
D80
5E
ZJZ
1V27
0RM
D80
6
EZ
JZ1V
270R
M
R805
2R2K
R806
2R2K
R807
2R2K
VDD
R63
3
0R0
C25
3
R01
R254
680
R507
2R2K
GND
R512
0R0
GNDC720
1
C412
1
GNDGND
R62
0
0R0
150/6R3C501
L601
C508
1
R513
2R2K
L501
220/
16
C50
2
IC601
123456789101112131415161718192021222324252627282930
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
(1/4W)
VD
VD
BS
RQ
BR
ST
BS
CK
BR
XE
N
BD
AT
A
CD
RS
T
CD
VD
D
CD
GN
D
CD
R
AG
ND
CD
L
CD
GN
D
PG
ND
DP
DM
US
BG
ND
US
BG
ND
RDS
USB5V
BUZZER15MHz
FO
R W
IRE
D R
EM
.
EXCEPT WIRED REM.
WIRED REM.
WIRED REM.
DSENS
US5V
ROT0
JOYST
ILM+
SWVDD
DGND
ILMGND
DPDT
DP
KYDT
ROT1
DM
USBGND
ILM
JUM
PE
R
USB
EW
5:C
WE
2097
RO
T1
RO
T0
NC
NC
NC
BY
TE
CN
VS
SNC
DS
EN
S
RE
SE
TX
OU
T
VS
S
XIN
VC
C
NM
I
BS
EN
S NC
NC
RX
2
VD
CO
NT
CD
RS
T
US
BC
TL
FLG
PE
ENC
SY
NC
RX
TX
BSOBSI
BSCK
KEYD
DPDT
KYDT
ILM2
NC
PCL
ASENBO
MUTE
TELIN
BRST
BRXEN
BSRQ
ANTPW
DALMON
SYSPW
ILM
PW
NC
ISE
NS
IPP
W
VS
T
VC
K
VD
T
RO
MD
AT
A
RO
MC
K
RO
MC
S
NC
VC
C
TE
ST
IN
VS
S
TU
NP
CE
2
TU
NP
CE
1
TU
NP
CK
TU
NP
DI
TU
NP
DO
NC
NC
NC
RC
K
LDE
T
AS
EN
S
RD
SLK
RD
SD
T
RD
S57
K
NC
NC
NC
NC
NC
JOYSTNC
RGBDT
RGBCK
RGBST
NC
NC
NC
SSENS
NC
KEYAD
MODEL
AVSS
SL
VREF
AVCCNC
NC
NC
EW5:PEG475A
ES,CN5:PEG409A
SYSTEM CONTROLLER
REAR AUX IN
5V
14.1V
EW5
EW5
EW5
EW5
EW5
EW5
ES,CN5
ES
ES,CN5
EW5:1KES,CN5:0R0
ES,CN5
REAR AUX
SWVDDOELPW
ES
,CN
5:C
WE
2098
BCN1801
C CN701
FM
/AM
TU
NE
R U
NIT
FM(10%):-29.5dBs(EW5) -33.5dBs(ES,CN5)
AM(15%):-26.0dBs(EW5) -30.0dBs(ES,CN5)
AUX1:+2.2dBs
CD/USB: +0.6dBs
DEH-4000UB/XS/EW5461 2 3 4
C
D
F
A
B
E
RO
T1
RO
T0
/AS
EN
S
RD
S-L
OC
K
RD
S-D
AT
A
LDE
T
RD
S-H
SLK
C704
1
C705
1
R81
3
100K
R84
9
10K
0R0
C15
3R
22
ND
01
345675 76 77 78
RO
T1
RO
T0
NC
NC
NC
LDE
T
AS
EN
S
RD
SLK
RD
SD
T
RD
S57
K
5 6 7 8
A-b
A
FR
1
FR
2
FL1
FL2
RL2
RL1
RR
2
RR
1
VD
T
VC
K
VS
T
TU
NR
TU
NL
AU
XR
AU
XL
RST
SL
KEY2
ROT1
ROT0
/ASENS
/BSENS
SWVDD
ILM
PW
SSENS
DALMON
TELIN
JOYST
RGBDT
RGBCK
RGBST
SYSPW
RL2
FL2
RL1
FL1
RR2
FR2
RR1
FR1
MUTE
JOYST
DPDT
KYDT
/DSENS
AU
XG
ND
USDM
USDP
RT
3N66
M
Q35
1
E1
1 B1
2 C2
3E
245B
26C
1
R36
0
22K
R35
9
22K CN351
1
2
3
4
5
6
7
8
9
10
R351
820
R356
820
R352
0R0
2R2/50
C352
2R2/50
C351
R355
820
R36
4
22K
RT
3N66
M
Q35
3
E1
1 B1
2 C2
3E
245B
26C
1
2R2/50
C355
R36
3
22K
R358
820
2R2/50
283R653C
0R0
R38
1
0R0
R38
4
0R0
GND
FU353
CEK1286
1
R39
4
0R0
R39
3
0R0
D931
HZS7L(C3)
D932
HZS7L(A1)
R93
4
47K
R935
47K
R93
6
47K
R93
1
100K
R93
210
0K
R933
100K
R93
7
4R7K
Q931
E11
B12
C23
E2
45 B2
6 C1
GND
GND
R95
1
47K
R952
1K
R953
4R7K
D951
MC2848-11
L951
GNDGND
NJM
2388
F84
IC92
1
1V
IN
2V
OU
T
3G
ND
4C
ON
TR
OL
C92
1
R01
C92
4
R01
R92
2
47K
100/
16
C92
3
220/
10
C92
2
GND
L901
GNDQ911
2SD2396
D91
2
HZ
S6L
(B2)
1000
/16
C91
3
R91
1
22K
C91
2
R01
Q912
RT3T22M
2E1
2B2
1C31E
4
51B
62C
47/1
0
C91
1
GND
VD
D
VC
C
GND
GND
GND
R851
15K
R85
3
2R2K
2SA1036KQ851 R
852
4R7K
RT1N141M-11Q852
L852
GND
C85
1
R1
VD
D
C90
1
R1
GND
R15
1
1K
R15
2
1K
R15
3
1K
GND
C15
4
1
C15
61
C15
91
10/1
6C
160
10/1
6C
165
47/1
0
C16
2
C16
3
R1
R18
0
0R0
VCC
L161
10/1
6
C31
1
C30
9
2R2
GND
C31
0
2R2
Q45
3
RT
3T22
M
2E1
2B2
1C3
1E4 5
1B
62C
D45
4
1SS
133
R45
4
1K(1
/4W
)
B.UP
GND
GND
GND
RT1N241MQ451
R451
10K
R45
3
15K
R452
220
33/1
0
C45
1
10/1
6
C96
2
IC96
1
S-8
0835
CN
MC
-B8U
OU
T1
VD
D2
VS
S3
N.C
145
N.C
2
R96
2
8R2K
C96
1
R04
7
VC
C
R309
15K(1/4W)
VD
D
L602
C60
4
1
10/1
6
C60
5
C60
6
R1
10/1
6
C60
7
R60
6
10K
R613
100K
GND
VDD
B.UP
R609
100K R608
100K
GND
R825
1K
R81
1
47K
VDD
VDD
VDD
IC15
1
PM
L018
A
IN5-
_L1
IN5+
_L2
IN4+
_L3
IN4-
_L4 5
IN3_
L
6IN
2_L
7IN
1_L
8V
ref
9V
cc
10F
ront
_L
11R
ear_
L
12P
re/S
W_L
13V
p
14P
ref
15P
GN
D
16P
re/S
W_R
17R
ear_
R
18F
ront
_R
19D
AT
A
20C
LK
21S
TB
22G
ND
23IN
1_R
24IN
2_R
25IN
3_R
26IN
4-_R
27IN
4+_R
28IN
5+_R
2SA1037KQ951
PAL007CIC301
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
C316
R47
C317
R47
C318
R47
C315
R47
C305
R47
C306
R47
C307
R47
C308
R47
3300
/16
C31
3
CN901
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
BUP1BUP2
GND1GND2
12V
BUP3
BS1BS2
AS2AS1
R62
7
1K
RCRR
RCRL
SWR
SWL
RCFR
RCFL
RCG1
US
5V
R837
0R0
R84
8
0R0
GND
C15
5R
22
13V
VC
C1
R938
1K(1/4W)
R955
15K(1/4W)
R91
2
1R5K
(1/4
W)
R84
70R
0
R84
60R
0
R30
1
470
R30
3
470
R30
4
470
R30
6
470
D911
S5688G
D901
S5688G
D902
S5688G
D90
3
S56
88G
D904
S5688G
1279 80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
TEL MUTE
8.4V
VDD
ASENSBSENS
SWVDD
RESET
MUTE
FOR 2P/OFOR 3P/O
FOR 2P/O
FOR WIRED REM.
SWR
SWL
FR
FL
TA
B
PG
ND
RL-
ST
BY
RL+
VC
C
RR
-
PG
ND
RR
+
SV
R
RR
IN
RLI
N
AG
ND
FLI
N
FR
IN
AC
GN
D
FR
+
PG
ND
FR
-
VC
C
FL+
MU
TE
FL-
PG
ND
B.R
EM
B.UPNC
NC
NC
NC
NC
JOYSTNC
RGBDT
RGBCK
RGBST
NC
NC
NC
SSENS
NC
KEYAD
MODEL
AVSS
SL
VREF
AVCCNC
NC
NC
5V
8.4V
5V
3A
600 H
EW5
EW5
ES,CN5
ES,CN5
ES,CN5
EW5,ES:RT3CLLMCN5:UMX1N
2
A TUNER AMP UNIT
Decimal points for resistorand capacitor fixed valuesare expressed as :2.2 t 2R20.022 t R022
The > mark found on some component parts indicatesthe importance of the safety factor of the part.Therefore, when replacing, be sure to use parts ofidentical designation.
Symbol indicates a resistor.No differentiation is made between chip resistors anddiscrete resistors.
NOTE :
Symbol indicates a capacitor.No differentiation is made between chip capacitors anddiscrete capacitors.
>
RR+
RR-
FR+
FR-
FL+
FL-
RL+
RL-
ACCGND
BACKUP
B.REM
GND
B.REM
ACC
RL-
RL+
FL-
FL+
TEL
RR-
RR+
FR-
FR+
BUP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16CEK1208>
10A
FM(10%): -12.0dBs(EW5), -16.0dBs(ES,CN5)AM(15%): -7.5dBs(EW5), -11.5dBs(ES,CN5)CD/USB: -9.3dBs
AUX1: -9.7dBs
FM(10%):+13.98dBs(EW5), +9.98dBs(ES,CN5)AM(15%):+18.48dBs(EW5), +14.48dBs(ES,CN5)CD/USB:+16.7dBs
AUX1:+16.3dBs
DEH-4000UB/XS/EW5 475 6 7 8
C
D
F
A
B
E
JOY
ST
NJM2388
IC921
1VIN
2VOU
3GND
4CON
L901
VCC
IC961
NMC-B8U
UT
DD
SSN.C1
N.C2
R6
10
B.U
P
16
BU
P1
BU
P2 G
ND
1G
ND
2S
5688
GB
.UP
600
H
EW
5
GBU
P16
CEK
1208
> 10A
1 2 3 4
A-a
A-b
A-b 1 32
FR1
FR2
FL1
FL2
RL2
RL1
RR2
RR1
VDT
VCK
VST
TUNL
SL
KE
Y2
SS
EN
S
RG
BD
T
RG
BC
K
RG
BS
T
MU
TE
RT3N66M
Q351
E11
B12
C23
E24
5B2
6C1
R360
22K
R359
22K
CN
351
1 2 3 4 5 6 7 8 9 10
R35
1
820
R35
6
820
R35
2
0R0
2R2/
50
C35
2
2R2/
50
C35
1
R35
5
820
R364
22K
RT3N66M
Q353
E11
B12
C23
E24
5B2
6C1
2R2/
50
C35
5
R363
22K
R35
8
820
2R2/
50
28
3R
65
3C
0R0
R381
0R0R384
0R0
GN
D
FU
353
CE
K12
86
1
R394
0R0
R393
0R0
F84
T
TROL
GN
D
GN
D
GN
D
C901
R1
GN
D
R151
1K
R152
1K
R153
1K
GN
D
1
10/16C160
10/16C165
47/10
C162
C163
R1
R180
0R0
VC
C L161
10/16
C311
C309
2R2
GN
D
C310
2R2
Q453
RT3T22M
2E 1
2B 2
1C 31E
4
51B
62C
D454
1SS133 R454
1K(1/4W)
B.U
P
GN
D
GN
D
RT
1N24
1MQ
451R
451
10K
R453
15KR45
2
220
33/10
C451
4
5
VCC
R30
9
15K
(1/4
W)
L602
C604
1
10/16
C605
C606
R1
10/16
C607
06
K
VD
D
R60
9
100K
R60
8
100K
PML018A
IN5+_L
IN4+_L 3
IN4-_L 4
5IN3_L
6IN2_L
7IN1_L
8Vref
9Vcc
10Front_L
11Rear_L
12Pre/SW_L
13Vp
14Pref15PGND
16Pre/SW_R
17Rear_R
18Front_R
19DATA
20CLK
21STB
22GND
23IN1_R
24IN2_R
25IN3_R
26IN4-_R
IN4+_R
PA
L007
CIC
301
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
C31
6 R47
C31
7 R47
C31
8 R47
C31
5
R47
C30
5
R47
C30
6 R47
C30
7 R47
C30
8 R47
3300/16
C313
12V
RC
RR
RC
RL
SW
R
SW
L
RC
FR
RC
FL
RC
G1
GN
D
C155R22
VCC1
R301
470
R303
470
R304
470
R306
470
D903
S5688G
D90
4
S56
88G
8.4V
MU
TE
FO
R 2
P/O
FO
R 3
P/O
FO
R 2
P/O
FO
R W
IRE
D R
EM
.
SW
R
SW
L
FR
FL
TAB
PGND
RL-
STBY
RL+
VCC
RR-
PGND
RR+
SVR
RRIN
RLIN
AGND
FLIN
FRIN
ACGND
FR+
PGND
FR-
VCC
FL+
MUTE
FL-
PGND
B.REM
3A
ES
,CN
5
ES
,CN
5
ES
,CN
5
2
AT
UN
ER
AM
P U
NIT
>
FM
(10%
): -
12.0
dBs(
EW
5), -
16.0
dBs(
ES
,CN
5)A
M(1
5%):
-7.
5dB
s(E
W5)
, -11
.5dB
s(E
S,C
N5)
CD
/US
B: -
9.3d
Bs
AU
X1:
-9.
7dB
s
FM
(10%
):+1
3.98
dBs(
EW
5), +
9.98
dBs(
ES
,CN
5)A
M(1
5%):
+18.
48dB
s(E
W5)
, +14
.48d
Bs(
ES
,CN
5)C
D/U
SB
:+16
.7dB
sA
UX
1:+1
6.3d
Bs
DEH-4000UB/XS/EW5481 2 3 4
C
D
F
A
B
E
3
RG
BC
K
RG
BS
T
MU
TE
R45
1
10K
453
5KR45
2
220
/10
451
VCC
D903
S5688G
S56
88G
5 6 7 8
A-a
A-b
A-b4 65
RS
T
RO
T1
RO
T0
/AS
EN
S
/BS
EN
S
SW
VD
D
DA
LMO
N
TE
LIN
JOY
ST
RG
BD
T
SY
SP
W
RL2
FL2
RL1
FL1
RR
2
FR
2
RR
1
FR
1
JOY
ST
DP
DT
KY
DT
/DS
EN
S
US
DM
US
DP
D93
1
HZ
S7L
(C3)
D93
2
HZ
S7L
(A1)
R934
47K
R93
5
47K
R936
47K
R931
100KR932100K
R93
3
100K
R937
4R7K
Q93
1
E11
B12
C23
E24
5B2
6C1
GN
D
GN
D
R951
47K
R95
2
1K
R95
3
4R7K
D95
1
MC
2848
-11
L951
GN
DG
ND
NJM2388F84
IC921
1VIN
2VOUT
3GND
4CONTROL
C921
R01
C924
R01
R922
47K
100/16
C923
220/10
C922
GN
D
L901
GN
DQ
911
2SD
2396 D912
HZS6L(B2)
1000/16C913
R911
22K
C912
R01
Q91
2
RT
3T22
M
2E1
2B2
1C3
1E4 5
1B
62C
47/10
C911
GN
D
VDD
VCC
GN
D
R85
1
15K
R853
2R2K
2SA
1036
KQ
851
R852
4R7K
RT
1N14
1M-1
1Q
852
L852
GN
D
C851
R1
VDD
GN
D
GN
D
RT
1N24
1MQ
451
R
1
33
C
10/16
C962
IC961
S-80835CNMC-B8U
OUT1
VDD2
VSS3
N.C14
5N.C2
R962
8R2K
C961
R047
VDD
R606
10K
R61
3
100K
GN
D
B.U
P
GN
D
R82
5
1K
VD
D
VD
D
VD
D
2SA
1037
KQ
951
CN
90112345678910111213141516
BU
P1
BU
P2 G
ND
1G
ND
2
BU
P3
BS
1B
S2
AS
2AS
1
US5V
R83
7
0R0
R848
0R0
13V
R93
8
1K(1
/4W
)
R95
5
15K
(1/4
W)
R912
1R5K(1/4W)
R8470R0
R8460R0
D91
1
S56
88G
D90
1
S56
88G
D90
2
S56
88G
D90
4
TE
L M
UT
E
8.4V
VD
D
AS
EN
SB
SE
NS
SW
VD
D
RE
SE
T
FO
R W
IRE
D R
EM
.
B.U
P
5V
8.4V
5V
600
H
EW
5
EW
5
EW
5,E
S:R
T3C
LLM
CN
5:U
MX
1N
Dec
imal
poi
nts
for
resi
stor
and
capa
cito
r fix
ed v
alue
sar
e ex
pres
sed
as :
2.2
t 2
R2
0.02
2t
R02
2
The
> m
ark
foun
d on
som
e co
mpo
nent
par
ts in
dica
tes
the
impo
rtan
ce o
f the
saf
ety
fact
or o
f the
par
t.T
here
fore
, whe
n re
plac
ing,
be
sure
to u
se p
arts
of
iden
tical
des
igna
tion.
Sym
bol i
ndic
ates
a r
esis
tor.
No
diffe
rent
iatio
n is
mad
e b
etw
een
chip
res
isto
rs a
nddi
scre
te r
esis
tors
.
NO
TE
: Sym
bol i
ndic
ates
a c
apac
itor.
No
diffe
rent
iatio
n is
mad
e b
etw
een
chip
cap
acito
rs a
nddi
scre
te c
apac
itors
.
RR +
RR -
FR +FR -
FL +FL -
RL +
RL -
AC
CG
ND
BA
CK
UP
B.
RE
M
GN
D
B.R
EM
AC
C
RL-
RL+FL-
FL+TE
L
RR
-
RR
+
FR
-
FR
+
BU
P
12345678910111213141516C
EK12
08> 10
A
DEH-4000UB/XS/EW5 495 6 7 8
C
D
F
A
B
E
SY
SP
W
SW
VD
D
OE
LPW
48 49 508182
SY
SP
W
ILMPWNCISENSIPPW
VST
VCK
VDT
ROMDATA
ROMCK
ROMCS
NC
VCC
TESTIN
VSS
TUNPCE2
TUNPCE1
TUNPCK
TUNPDI
TUNPDO
NC
NC
NC
RCK
LDET
ASENS
RDSLK
RDSDT
RDS57K
NC
NCNC
JOY
ST NC
SW
VD
DO
ELP
W
1 2 3 4
A-b
A-a
A-a
A-b 1 32R
DS
-HS
LK
RD
S-C
K
RD
S-L
OC
K
RD
S-D
AT
A
TU
NP
DO
TU
NP
CK
CE
1
TU
NP
DI
LDE
T
CE
2
VDCONT
/BSRQ
/BRST
BSCK
BRXEN
BDATA
CDRST
TUNR
TUNL
AUXR
AUXL
ROT1
ROT0
TX
VDCONT
KY
DT
AS
EN
BO
DA
LMO
N
RXRX
RST
BD
AT
AB
DA
TA
DP
DT
SL
/BSENS
FLG
CDRST
BS
CK
MU
TE
TE
LIN
/BR
ST
BR
XE
N
/BS
RQ
USBCTL
SYNC
KE
Y1
AN
TP
W
USDP
USDM
KE
Y2
KE
Y1
/DSENS
AU
XR
AU
XL
AUXGND
AU
XG
ND
GND
ILM
2
TU
NR
TU
NL
Y40
1
1A
M_A
NT
2R
F_G
ND
3F
M_A
NT
4V
CC
5S
L6
CE
27
WC
8C
E1
9C
K10
DI
11LD
ET
12O
SC
GN
D13
RO
M_V
DD
14D
O15
DG
ND
16C
OM
P17
VD
D_3
.318
RD
S_C
K19
RD
S_D
AT
A20
RD
S_L
OC
K21
RD
S_H
SLK
22B
EG
ND
23Lc
h24
Rch
UMH1N
Q401E11
B12
C23E2 4
5B2
6C1
UMH1N
Q402E11
B12
C23E2 4
5B2
6C1
R408
22K
R409
22K
R410
22K
R411
22K
R41
322
0
R41
522
0
R40
2
680
R40
3
680
R40
4
680
R40
5
680
R40
6
680
R42
10R
0
R40
7
C402R01
C403
R01
C406
R1
C411
47P
C407
R01
C410
R47
C404
4R7
L401
L403
L402
CN
401
1
2
3
ZN
R40
1
IMS
A-6
801-
01Y
901
22/10
C408
100/10
C405
VCC
VCC
GN
D
GN
D
VDD
GN
D
GN
D
GN
D
GN
D
C70
4
1
C70
5
1
GN
D
R708
220
R710
220
R712
220R713
220
GN
D NJM2885DL1-33
IC702
1IN
2GND
3OUTC7091
22/10
C708
C710
R47
GN
D
GN
D
Q70
22S
D23
96
100/10
C703
C701
R047
D701HZS7L(C3) G
ND
Q70
1
RT
3T22
M
2E1
2B2
1C3
1E45
1B
62C
R70
1
270
R70
3
4R7K
R70
4
100K
R70
5
4R7K
R70
6
100K
R71
4
100K
R70
7
100K
GN
D
GN
D
C154
1
C1561
C1591
10/16C160
C163
R1
VC
C L161
CP
V10
62
BZ
601
11
22 G
NDR61
8
1K
R616
47K
R602
10K
C601
18P
C602
18PR967
1K
GN
D
L602
C604
1
10/16
C605
R603
10K
VD
D
GN
D
NJM
2885
DL1
-33
IC40
1
1IN
2GND
3OUT
CN
701
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
IC151
IN5-_L 1
IN5+_L 2
IN4+_L 3
IN4-_L 4
5IN3_L
6IN2_L
7IN1_L
8Vref
9Vcc
10Front_L19DATA
20CLK
21STB
22GND
23IN1_R
24IN2_R
25IN3_R
26IN4-_R
27IN4+_R
28IN5+_R
47/6R3
C401
R711
220
RC
H
LCH
BE
G
RH
SLK
RLK
RD
AT
RC
K
T3V TU
NG
DO
T5V OS
CG
LDE
T
DI CK
CE
1
CE
2
SL T8V FM
RF
G AM
VD
BSRQ
BRST
BSCK
BRXEN
BDATA
CDRST
CDVDD
UG
CDR
AG
CDL
PG
DP
DM
US
GN
D3
R626
22K
AU
XL
CN
621
24 1356
R627
1K
AU
XG
ND
R628
100K
WR
EM
1
R62
11K
R629
100K
R62
2
1K
WR
EM
2
C6214700P
C622
4700P
GN
D
WR
EM
G
AU
XR
R62522K
RST
PC
L
US
5V
GN
D
B.U
P
GN
D
C155R22
C153R22
D62
1
EZ
JZ1V
270R
MD
622
EZ
JZ1V
270R
MD
623
EZ
JZ1V
270R
M
R41
4
4R7(
1/4W
)
X60
1
YS
S50
02
R63
1
100
R63
2
100
R709
1K
C623
R1
R40
1
680
VD
D
VCC1
R633
0R0
GN
D
GN
DC
720
1
C41
2
1
GN
DG
ND
L601
IC60
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
8384858687888990919293949596979899100
(1/4
W)
VD
VD
BSRQ
BRST
BSCK
BRXEN
BDATA
CDRST
CDVDD
CDGND
CDR
AGND
CDL
CDGND
PGND
DP
DM
USBGND
USBGND
RD
S
BU
ZZ
ER
15M
Hz
FOR WIRED REM.
EX
CE
PT
WIR
ED
RE
M.
WIR
ED
RE
M.
WIR
ED
RE
M.
JUMPER
US
B
EW5:CWE2097
ROT1
ROT0
NC
NC
NC
BYTE
CNVSS
NC
DSENS
RESETXOUT
VSS
XIN
VCC
NMI
BSENS
NC
NC
RX2
VDCONT
CDRST
USBCTL
FLG
PEE
NC
SYNC
RX
TX
BS
OB
SI
BS
CK
KE
YD
DP
DT
KY
DT
ILM
2
NC
PC
L
AS
EN
BO
MU
TE
TE
LIN
BR
ST
BR
XE
N
BS
RQ
AN
TP
W
DA
LMO
N
NC
NC
RG
BD
T
RG
BC
K
RG
BS
TNC
NC
NC
SS
EN
SNC
KE
YA
D
MO
DE
L
AV
SS
SL
VR
EF
AV
CC
NCNC
NC
EW
5:P
EG
475A
ES
,CN
5:P
EG
409A
SY
ST
EM
CO
NT
RO
LLE
R
RE
AR
AU
X IN
EW
5
EW
5
EW
5
EW
5
EW
5
ES
,CN
5
ES
ES
,CN
5
EW
5:1K
ES
,CN
5:0R
0
ES
,CN
5
RE
AR
AU
X
ES,CN5:CWE2098
CC
N70
1
FM/AM TUNER UNIT
FM
(10%
):-2
9.5d
Bs(
EW
5)
-33
.5dB
s(E
S,C
N5)
AM
(15%
):-2
6.0d
Bs(
EW
5)
-30
.0dB
s(E
S,C
N5)
AU
X1:
+2.2
dBs
CD
/US
B: +
0.6d
Bs
DEH-4000UB/XS/EW5501 2 3 4
C
D
F
A
B
E
3
TE
LIN
/BR
ST
BR
XE
N
42 43 44878889
TE
LIN
BR
ST
BR
XE
NR
GB
CK
RG
BS
TNC
ES
,CN
5:P
EG
409A
SY
ST
EM
CO
NT
RO
LLE
R
5 6 7 8
A-a
A-b
A-b
A-a
4 65S
YS
PW
DA
LMO
N
CE1
CE2
VST
VCK
/BS
RQ
SW
VD
D
OE
LPW
ILMPW
IPPW
VDT
TUNPCK
TUNPDO
TUNPDI
/ASENS
RDS-LOCK
RDS-DATA
LDET
RDS-HSLK
AN
TP
W
ILMPW
RDS-CK
ISENS
FLG
US
BC
TL
SY
NC
R842
4R7K
R853
2SA
1036
KQ84
1
RT
1N14
1M-1
1Q
842
GN
D
R84
1
10K
R81
6
1
B.UP
R61
3
100K
R604
680R607
680
C60
9
47P
GN
D
GN
D
GN
D
R808
100K
R80
4
2R2K
R81
5
1K
R813
100K
R82
5
1K
VD
D
R811
47K
R849
10K
CN
803
1 2 3 4 5 6 7 8 9 10 11 12 13 14
GN
D
C252
R1
VD
D
C251
R1
R257
10K
IC251
R5523N001B
EN1
GND2
FLG3
VIN4
5VOUT
GN
D
GN
D
GN
D
GN
D
C504
1
R506
68K
R50
3
33K
R51
1
470R
502
33K
R505
8R2K
D501
RB060L-40
C505
100P
GN
D
B.U
P
R610
47K
GN
D
R605
680
R619
0R0
R617
47KR510
82K
C506
3300P
C50
3
220P
C507
R1
FLG
US
BC
TL
SY
NC
RT
SW
BF
V5
BS
U
INV
TE
ST
SW
5V
TP
1
TP
2
DP
DT
KY
DT
IMG
TP
3
TP
4
ILM
B
TP
5
TP
6
TP
7
DS
EN
DG
US
5V
GN
D
R836
0R0
R81
4
1K
D502
S5688G
BD
9781
HF
PIC
501
1VIN
2SW
3RT
4GND
5FB
6INV
7EN
D809
EZJZ1V270RM
D810EZJZ1V270RM
D801EZJZ1V270RM
D802
EZJZ1V270RM
D803EZJZ1V270RM
D804
EZJZ1V270RM
D805EZJZ1V270RM
D806
EZJZ1V270RM
R80
5
2R2K
R80
6
2R2K
R80
7
2R2K
C253
R01
R25
4
680
R50
7
2R2K
R51
2
0R0
R620
0R0
150/
6R3
C50
1
C50
8
1
R51
3
2R2K
L501
220/16
C502
45 46 47 48 49 50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
818283848586
SW
V
US
B5V
DS
EN
S
US
5V
RO
T0
JOY
ST
ILM
+
SW
VD
D
DG
ND
ILM
GN
D
DP
DT
DP
KY
DT
RO
T1
DM
US
BG
ND
ILM
BS
RQ
AN
TP
W
DA
LMO
N
SY
SP
W
ILMPWNCISENSIPPW
VST
VCK
VDT
ROMDATA
ROMCK
ROMCS
NC
VCC
TESTIN
VSS
TUNPCE2
TUNPCE1
TUNPCK
TUNPDI
TUNPDO
NC
NC
NC
RCK
LDET
ASENS
RDSLK
RDSDT
RDS57K
NC
NCNC
NC
NC
JOY
ST NC
RG
BD
T
5V
5V
14.1
V
EW
5
SW
VD
DO
ELP
W
BC
N18
01
DEH-4000UB/XS/EW5 515 6 7 8
C
D
F
A
B
E
560
EGIO
PT/LO
S.Rt
GION2
UTE
/BASS
EW
E
1 2 3 4
10.2 KEYBOARD UNIT
B
560
560
560
10K
10
120
100K
R1
R1
R1
EJECT
SRC/OFF
LIST
BAND/ESC RDM
DISP/BACK/SCRL
REGION1 R
R
REGION1 REBUTTON
TA/NEWS M
CLOCK SW
EW5
ES,CN5
5.00MHz
EW5
LCD DRIVER/KEY CONTROLLER
ES,CN5
DEH-4000UB/XS/EW5521 2 3 4
C
D
F
A
B
E
560
RL
R
5 6 7 8
B
33K
47K3R3K
2R2K
8R2K
2R2K
2R2K
470
470
470
470
470
1R5K
560
560
560
REGION2
RPT/LOCAL
S.Rtrv
EGION2
MUTE
SW/BASS
MC2848-11MC2846-11
B KEYBOARD UNIT
ACN803
EW5,ES
EW5,ES
CN5
CN5
USB
DEH-4000UB/XS/EW5 535 6 7 8
C
D
F
A
B
E
P
1 2 3 4
10.3 CD MECHANISM MODULE(GUIDE PAGE)
C-a
C
SWITCHES:CD CORE UNIT(S10.5COMP2-USB) S901:HOME SWITCH.........ON-OFF S903:DSCSNS SWITCH.....ON-OFF S904:12EJ SWITCH............ON-OFF S905:8EJ SWITCH..............ON-OFF
The underlined indicates the switch position.
M1 CXC7134SPINDLE MOTOR
M2 CXC4026LOADING/CARRIAGE MOTOR
PICKUP UNIT(P10.5)(SERVICE)
CD DRIVER
FF
FF
T
T
T
T
T
T
F
F
F
T
C
S
S
C
T
F
F
F
T
T S
S
C
C
C
C
S
S
F
F
T
T
1
2
3
4
5
7
8
9
a
d
e
f
c
DEH-4000UB/XS/EW5541 2 3 4
C
D
F
A
B
E
5 6 7 8
C-b
C
C CD CORE UNIT(S10.5COMP2-USB)
AC
N701
FSIGNAL LINEFOCUS SERVO LINETRACKING SERVO LINECARRIAGE SERVO LINESPINDLE SERVO LINE
T
C
S
6
b
g h
i
j
PE5611B
DEH-4000UB/XS/EW5 555 6 7 8
C
D
F
A
B
E
1 2 3 4
C-a
C-b
C-b 1 2
PE
5611
B
CC
D C
OR
E U
NIT
(S10
.5C
OM
P2-
US
B)
FS
IGN
AL
LIN
EF
OC
US
SE
RV
O L
INE
TR
AC
KIN
G S
ER
VO
LIN
EC
AR
RIA
GE
SE
RV
O L
INE
SP
IND
LE S
ER
VO
LIN
E
T C S
b
DEH-4000UB/XS/EW5561 2 3 4
C
D
F
A
B
E
5 6 7 8
C-a
C-b
C-b3
A CN701
6
gh
i j
DEH-4000UB/XS/EW5 575 6 7 8
C
D
F
A
B
E
CD
CO
RE
UN
IT(S
10.5
CO
MP
2-U
SB
) S
901:
HO
ME
SW
ITC
H...
......
ON
-OF
FS
903:
DS
CS
NS
SW
ITC
HO
N-O
FF
1 2 3 4
C-b
C-a
C-a
C-b 1 2
SW
ITC
HE
S:
PIC
KU
P U
NIT
(P10
.5)(
SE
RV
ICE
)
FF
FF
T
T
T
T
T TFF
F T C S
FFT T
c
d
f
DEH-4000UB/XS/EW5581 2 3 4
C
D
F
A
B
E
5 6 7 8
C-a
C-b
C-b
C-a
3S
WIT
CH
ES
:C
D C
OR
E U
NIT
(S10
.5C
OM
P2-
US
B)
S90
1:H
OM
E S
WIT
CH
......
...O
N-O
FF
S90
3:D
SC
SN
S S
WIT
CH
.....O
N-O
FF
S90
4:12
EJ
SW
ITC
H...
......
...O
N-O
FF
S90
5:8E
J S
WIT
CH
......
......
..ON
-OF
F
The
und
erlin
ed in
dica
tes
the
switc
h po
sitio
n.
M1
CX
C71
34S
PIN
DLE
MO
TO
R
M2
CX
C40
26LO
AD
ING
/CA
RR
IAG
E M
OT
OR
CD
DR
IVE
R
S
C
T F
F F T TSSCC
CCSS
123
4 5
7 8
9 a
e
DEH-4000UB/XS/EW5 595 6 7 8
C
D
F
A
B
E
1 2 3 4
10.4 WAVEFORMS
- CD CORE UNIT Note : 1. The encircled numbers denote measuring points in the circuit diagram.2. Reference voltage REFO1(1.65 V)
500 ms/div5 V/div5 V/div5 V/div10 V/div
1DSCSNS5CLCONT4LOEJ6VD
5 V/div5 V/div5 V/div5 V/div
1DSCSNS28SNS312SNS4LOEJ
5 V/div5 V/div5 V/div5 V/div
500 ms/div1DSCSNS28SNS312SNS4LOEJ
500 mV/div500 mV/div
200 ms/div@TE#FE
200 mV/div2 V/div2 V/div
500 ms/div0FIN!RFOK(MONI_3)7SIN
1 V/div500 mV/div1 V/div
1 s/div
500 ms/div
7SIN8CIN9TIN
2 V/div500 mV/div
5 μs/div$MDX7SIN
2 V/div500 mV/div
200 ms/div$MDX7SIN
500 mV/div500 mV/div500 mV/div500 mV/div
20 ms/div#FE0FIN@TE9TIN
1 V/div500 mV/div500 mV/div
500 μs/div%RFAGC@TE9TIN
500 mV/div500 mV/div
2 ms/div@TE%RFAGC
500 mV/div500 mV/div
200 ms/div0FIN#FE
Source On setup operation12 cm CD-DA Source On setup operation
CD-DA Play operation Spindle waveform during play operation Spindle waveform during play operation(Wider)
Focus Search waveform Track Open waveform 1 Track Jump waveform
12 cm CD-DA setup operation after loading
12 cm CD Loading operation 12 cm CD Loading operation 8 cm CD Loading operation
Ref.:GND
Mode:Normal
Ref.:GND
Mode:Normal
Ref.:GND
Mode:Normal
Ref.:REFO
Mode:Normal
Ref.:REFO
Mode:Normal
Ref.:REFO
Mode:Normal
Ref.:REFO
Mode:TEST
Ref.:REFO
Mode:TEST
Ref.:REFO
Mode:TEST
Ref.:REFO
Mode:Normal
Ref.:REFO
Mode:Normal
Ref.:REFO
Mode:Normal
DEH-4000UB/XS/EW5601 2 3 4
C
D
F
A
B
E
5 6 7 8
1 V/div500 mV/div500 mV/div
2 ms/div%RFAGC@TE9TIN
1 V/div500 mV/div500 mV/div
500 µs/div%RFAGC@TE9TIN
1 V/div500 mV/div500 mV/div
500 µs/div%RFAGC@TE9TIN
5 V/div5 V/div5 V/div5 V/div
500 ms/div1DSCSNS28SNS312SNS4LOEJ
1 V/div1 V/div
200 µs/div^LOUT&ROUT
1 V/div1 V/div1 V/div2 V/div
200 ms/div%RFAGC@TE8CIN7SIN
1 V/div1 V/div1 V/div1 V/div
500 µs/div%RFAGC9TIN@TE0FIN
5 V/div5 V/div5 V/div5 V/div
500 ms/div1DSCSNS28SNS312SNS4LOEJ
5 V/div5 V/div5 V/div
500 ms/div1DSCSNS5CLCONT4LOEJ
12 cm CD Eject operationAnalog audio waveform
12 cm CD Eject operation 8 cm CD Eject operation Black dot(800 µm) during play
Search operation(Outter to Inner)
4 Tracks Jump waveform 10 Tracks Jump waveform 32 Tracks Jump waveform
Ref.:REFO
Mode:TEST
Ref.:REFO
Mode:TEST
Ref.:REFO
Mode:TEST
Ref.:GND
Mode:Normal
Ref.:REFO
Mode:Normal
Ref.:GND
Mode:Normal
2 V/div2 V/div
50 ms/div*DP(DM
2 V/div2 V/div
50 ms/div*DP(DM
1 V/div1 V/div
50 ns/div*DP(DM
USB Play USB device inserting to USB connector. CD Play with USB device connecting.
Ref.:REFO
Mode:Normal
Ref.:GND
Mode:Normal
Ref.:AGND
Mode:Normal
DEH-4000UB/XS/EW5 615 6 7 8
C
D
F
A
B
E
1 2 3 4
2 V/div2 V/div
50 ms/div*DP(DM
ACC OFF with USB device connecting.
DEH-4000UB/XS/EW5621 2 3 4
C
D
F
A
B
E
5 6 7 8
DEH-4000UB/XS/EW5 635 6 7 8
C
D
F
A
B
E
L101
955
D901
D9
1 2 3 4
11. PCB CONNECTION DIAGRAM11.1 TUNER AMP UNIT
A
A TUNER AMP UNIT
CapacitorConnector
P.C.Board Chip PartSIDE B
SIDE A
NOTE FOR PCB DIAGRAMS1.The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic dia- gram.2.Viewpoint of PCB diagrams
1
1
10
15
16
15
2
1
15
EE
1
1
10
15
IC921
L852
D971
CN803
CN621
CN251
BZ601
Q702
L501
Q911
L901
CN101
R701
L951
CN701
R912
CN901
C501
C502
C313
C703
C708
C911
C913
R
C922
C923
D502
D701
D903
D904
D911
D912
D931
D932
D551
D552
5
5
10 20 30 40 50 60 70X
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Y
BCN1801
CCN701
WIRED REM.(EW5)CORD ASSYREAR AUX
DEH-4000UB/XS/EW5641 2 3 4
C
D
F
A
B
E
D971
3
L
1
D551
SSY
5 6 7 8
A
SIDE A
1
10
2
1
15
1015
20
1
15
10
1
10
15
20
25
D171
D181
R414
CN401
C401
C405
C408
CN622
C605
C607
R454
X601
R843
C451
C842
L101
Y401
D454
D841D842
L161
R309
L171
951
C311
CN351
R955
C351C352
C353
C160
C354C355
C162
C356
C165
C172
C174
C177
C183
L401
L403
IC301
L601
D901
D902
C962
L602
C971
5
70 80 90 100 110 120 130 140 150 160 170
FRONT
RCA
ANTENNA
FM
/AM
TU
NE
R U
NIT
DEH-4000UB/XS/EW5 655 6 7 8
C
D
F
A
B
E
8
25
30E
1
601
R602
R808
15
R819
C601
C
D
R113
R507
R931
L
1 2 3 4
A
A TUNER AMP UNIT
170 160 150 140 130 120 110 100 90
15
10
1520
25
1
5
1
1
1
1
15
35
40
45
50
55
60
65
70
75
80
85
90
95
100
1
1
1
1
E
1
E
E
11
E1
E
E
1
E
IC151
R401
D172
R402
R403
D173
R404
R405
R406
R407
R408
R409R
R603
R410
R604
D951
R411
R605
R412
R606
R413
R607
R608R415 R609
R803
R610
R804
R611
R805
R612
R613
R614
R421
R809
IC171
R619
R811R813
R620
R814
R8
R816
R627
R824
R631
C402
R632
C403
C404
IC961
R829
C406
C407
R830
R831
C602
R833
C410
C604
R834
C411
R835
C412
C606
R837
C608
R451
C609
R452
R453
R841
R842
R844
R845
C623
FU353
C841
ZNR401
IC401
IC601
D621
IC602
D622
D623
Q351
Q352
Q353
R301
R302 R303R304
Q171
R305
R306
Q172
R307
R308Q951
Q181
Q182
Q971
C301C302
C303
C304
C305
C307C308
R151
C309
R152
R153
C310
R351
C315
R352
C316
R353
C317
R354
C318
R930
R355
R356
R932
R358
C704
R359
C705
R360
R361
R362
R36
3
R36
4
R171
R172
R173
R174
R175
R176
R177R178
R180
R951
R181
R952
R953R954
R38
1
C151
R382
C152
C153
R383
R384
C154
R385
C155
R386
R962
C156
C157
C158
C159
R967
R391
R392
R39
3
C163
C357
R394
C358
C359
C360
C361
C36
2
C171
Q401
Q402
C173
C175
C176
C178
C179
C181C182
L402
C961
Q451
Q453
Q841
Q842
Q843
Q844
C306
510
20
1
1
TESTPC
>FU353 (B,131,132) Fuse 3 A CEK1286
DEH-4000UB/XS/EW5661 2 3 4
C
D
F
A
B
E
90
1
15
40
45
R80
R8R813R967
510
5 6 7 8
A
SIDE B
80 70 60 50 40X
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Y
30 20 10
E
E
1 10
E
E
1
25
30
35
1
1
1
E
1
5
15
1
1
Q851
Q852
R601
R602
IC551
5
R806
R807
R808
R616
R617
R618
11
R814
R621
R815
R622
R623R624
R819
R625
R626
R628R629
R825
R633
R253
R254
R255
C601
R256
C602
R832
R257
C603
R836
C801
R846
R847
R848
R849R851
C621
R852
C622
R853
C251
C252
C253
Q101
Q102
C851
Q701
D801
D802
D803
D804
D805D806
D807D808
D809
D810
Q912
D251
D252
Q931
R101
R102
R103
R104
R105
R106
R107
R108
R109
R110
R111
R112
R113
R114
R116
R117
R118
IC251
R502
R503
R505
R506
R507
R508
R509
R703
R510
R704
R511
R705
R512
R706
R513
R707
R708
R709
R710
R711
R712
R713
R714
C101
C102C103
C104
R911
Q971
R922
C503
C504
C505
C506
C507
C508
R931
C701
C702
R933
R934
R935
R936
C706
R937
C70
7R938
C709
C901
C710
C711
C715
C716
C912
C720
C721
C921
C924
C931
R971
R972
C551
C552
D501
IC101
IC501
IC702
L2515
20
1
1
1
1
1
PCL
1
DEH-4000UB/XS/EW5 675 6 7 8
C
D
F
A
B
E
1 2 3 4
11.2 KEYBOARD UNIT
B
SIDE AB KEYBOARD UNIT
EJE
CT
US
B
TA
/NE
WS
(E
W5)
CLO
CK
(E
S, C
N5)
DIS
P/B
AC
K/S
CR
LLIS
T
S.R
trv
RD
M
RP
T/L
OC
AL
MU
LTI-
CO
NT
RO
L
MU
TE
(E
W5)
SW
/BA
SS
(E
S, C
N5)
SR
C/O
FF
BA
ND
/ES
C
DEH-4000UB/XS/EW5681 2 3 4
C
D
F
A
B
E
5 6 7 8
B
SIDE BB KEYBOARD UNIT
ACN803
DEH-4000UB/XS/EW5 695 6 7 8
C
D
F
A
B
E
1 2 3 4
11.3 CD CORE UNIT(S10.5COMP2-USB)
C
SIDE AC CD CORE UNIT(S10.5COMP2-USB)
A CN701
PICKUP UNIT(P10.5)(SERVICE)
HOME
MLOADING/CARRIAGE MOTOR
M
SPINDLE MOTOR
E F
REFO1
DEH-4000UB/XS/EW5701 2 3 4
C
D
F
A
B
E
5 6 7 8
C
SIDE BC CD CORE UNIT(S10.5COMP2-USB)
12EJ8EJ
DSCSNS
DEH-4000UB/XS/EW5 715 6 7 8
C
D
F
A
B
E
1 2 3 4
12. ELECTRICAL PARTS LIST
NOTE: Parts whose parts numbers are omitted are subject to being not supplied. The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS..... The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Meaning of the figures and others in the parentheses in the parts list. Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding PC board. IC 301 (A, 91, 111) IC NJM2068V
Circuit Symbol and No. Part No.
Unit Number : YWM5203(EW5)
Unit Number : YWM5205(ES)
Unit Number : YWM5207(CN5)
Unit Name : Tuner Amp Unit
Unit Number : (EW5)
Unit Number : (ES)
Unit Name : Keyboard Unit
Unit Number : (CN5)
Unit Name : Keyboard Unit
Unit Number : CWX3527
Unit Name : CD Core
Unit(S10.5COMP2-USB)
AUnit Number : YWM5203(EW5)Unit Number : YWM5205(ES)Unit Number : YWM5207(CN5)Unit Name : Tuner Amp Unit
MISCELLANEOUS
IC 151 (B,135,85) IC PML018AIC 251 (B,44,69) IC R5523N001BIC 301 (A,105,139) IC PAL007CIC 401 (B,165,29) IC NJM2885DL1-33IC 501 (B,16,32) Regulator IC BD9781HFP
IC 601 (B,96,57) IC(EW5) PEG475A(B,96,57) IC(ES,CN5) PEG409A
IC 702 (B,58,29) IC NJM2885DL1-33IC 921 (A,6,120) IC NJM2388F84IC 961 (B,98,33) IC S-80835CNMC-B8U
Q 351 (B,166,125) Transistor RT3N66MQ 353 (B,135,125) Transistor(ES,CN5) RT3N66MQ 401 (B,156,40) Transistor(EW5) UMH1N
Q 402 (B,156,45) Transistor(EW5) UMH1NQ 451 (B,117,119) Transistor RT1N241M
Q 453 (B,116,116) Transistor RT3T22MQ 701 (B,20,60) Transistor RT3T22MQ 702 (A,7,70) Transistor 2SD2396Q 841 (B,131,23) Transistor 2SA1036KQ 842 (B,139,17) Transistor RT1N141M-11
Q 851 (B,33,15) Transistor 2SA1036KQ 852 (B,24,16) Transistor RT1N141M-11Q 911 (A,7,104) Transistor 2SD2396Q 912 (B,16,73) Transistor RT3T22MQ 931 (B,64,94) Transistor(EW5,ES) RT3CLLM
(B,64,94) Transistor(CN5) UMX1N
Q 951 (B,112,106) Transistor(EW5) 2SA1037KD 454 (A,94,105) Diode 1SS133D 501 (B,22,44) Diode RB060L-40D 502 (A,16,58) Diode S5688GD 621 (B,111,90) Varistor EZJZ1V270RM
D 622 (B,111,94) Varistor EZJZ1V270RMD 623 (B,111,91) Varistor EZJZ1V270RMD 701 (A,26,65) Diode HZS7L(C3)D 801 (B,63,6) Varistor EZJZ1V270RMD 802 (B,64,6) Varistor EZJZ1V270RM
D 803 (B,68,6) Varistor EZJZ1V270RMD 804 (B,69,6) Varistor EZJZ1V270RMD 805 (B,74,6) Varistor EZJZ1V270RMD 806 (B,78,6) Varistor EZJZ1V270RMD 809 (B,80,14) Varistor EZJZ1V270RM
D 810 (B,60,6) Varistor EZJZ1V270RMD 901 (A,74,110) Diode S5688GD 902 (A,78,107) Diode S5688GD 903 (A,62,103) Diode S5688GD 904 (A,59,103) Diode S5688G
D 911 (A,16,80) Diode S5688GD 912 (A,16,75) Diode HZS6L(B2)D 931 (A,55,96) Diode HZS7L(C3)D 932 (A,54,93) Diode HZS7L(A1)D 951 (B,108,109) Diode(EW5) MC2848-11
ZNR401 (B,165,113) Surge Protector IMSA-6801-01Y901L 161 (A,122,99) Inductor LAU2R2KL 401 (A,150,90) Inductor LAU1R0K
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5721 2 3 4
C
D
F
A
B
E
5 6 7 8
L 402 (B,159,106) Inductor LCTAW220J2520L 403 (A,156,34) Inductor LAU1R0K
L 501 (A,29,40) Inductor YTF5003L 601 (A,94,41) Ferri-Inductor LAU100KL 602 (A,104,34) Inductor LAU2R2KL 852 (A,37,16) Inductor LAU2R2KL 901 (A,39,102) Choke Coil 600 µH CTH1280
L 951 (A,70,103) Inductor(EW5) LAU2R2KX 601 (A,84,44) Oscillator 15 MHz YSS5002>FU353 (B,131,132) Fuse 3 A CEK1286BZ601 (A,29,16) Buzzer(ES,CN5) CPV1062Y 401 (A,163,101) FM/AM Tuner Unit(EW5) CWE2097
(A,163,101) FM/AM Tuner Unit(ES,CN5) CWE2098
> Fuse 10 A YEK5001
RESISTORS
R 151 (B,146,88) RS1/16S102JR 152 (B,147,87) RS1/16S102JR 153 (B,145,86) RS1/16S102JR 180 (B,120,97) RS1/16S0R0JR 254 (B,45,72) RS1/16S681J
R 257 (B,58,52) RS1/16S103JR 301 (B,124,111) RS1/16S471JR 303 (B,128,109) RS1/16S471JR 304 (B,140,109) RS1/16S471JR 306 (B,134,109) RS1/16S471J
R 309 (A,98,106) RD1/4PU153JR 351 (B,159,114) RS1/16S821JR 352 (B,156,120) RS1/16S0R0JR 355 (B,136,121) (ES,CN5) RS1/16S821JR 356 (B,132,97) RS1/16S821J
R 358 (B,131,129) (ES,CN5) RS1/16S821JR 359 (B,163,133) RS1/16S223JR 360 (B,159,132) RS1/16S223JR 363 (B,134,129) (ES,CN5) RS1/16S223JR 364 (B,137,129) (ES,CN5) RS1/16S223J
R 381 (B,136,129) (ES,CN5) RS1/16S0R0JR 382 (B,140,125) (ES,CN5) RS1/16S0R0JR 384 (B,148,117) RS1/16S0R0JR 393 (B,141,128) (ES,CN5) RS1/16S0R0JR 394 (B,144,128) RS1/16S0R0J
R 401 (B,152,54) RS1/16S681JR 402 (B,158,78) (EW5) RS1/16S681JR 403 (B,156,85) RS1/16S681JR 404 (B,157,88) RS1/16S681JR 405 (B,157,90) RS1/16S681J
R 406 (B,156,91) RS1/16S681JR 407 (B,156,93) (EW5) RS1/16S102J
(B,156,93) (ES,CN5) RS1/16S0R0JR 408 (B,142,46) (EW5) RS1/16S223JR 409 (B,147,49) (EW5) RS1/16S223J
R 410 (B,147,46) (EW5) RS1/16S223JR 411 (B,142,43) (EW5) RS1/16S223JR 413 (B,156,36) (EW5) RS1/16S221JR 414 (A,157,23) RD1/4PU4R7JR 415 (B,156,42) (EW5) RS1/16S221J
R 421 (B,155,86) RS1/16S0R0JR 451 (B,121,117) RS1/16S103JR 452 (B,119,121) RS1/16S221J
Circuit Symbol and No. Part No.R 453 (B,121,125) RS1/16S153JR 454 (A,117,111) RD1/4PU102J
R 502 (B,26,25) RS1/16S3302FR 503 (B,24,27) RS1/16S333JR 505 (B,28,31) RS1/16S8201FR 506 (B,27,31) RS1/16S683JR 507 (B,82,57) RS1/16S222J
R 510 (B,28,45) RS1/16S823JR 511 (B,28,22) RS1/10SR471JR 512 (B,53,21) RS1/16S0R0JR 513 (B,32,22) RS1/16S222JR 602 (B,83,49) RS1/16S103J
R 603 (B,98,86) (EW5) RS1/16S103JR 604 (B,109,62) RS1/16S681JR 605 (B,113,59) RS1/16S681JR 606 (B,103,28) (EW5) RS1/16S103JR 607 (B,110,60) RS1/16S681J
R 608 (B,107,40) (ES,CN5) RS1/16S104JR 609 (B,105,43) RS1/16S104JR 610 (B,106,65) RS1/16S473JR 613 (B,110,83) RS1/16S104JR 616 (B,36,27) RS1/16S473J
R 617 (B,42,64) RS1/16S473JR 618 (B,74,59) (ES,CN5) RS1/16S102JR 619 (B,115,53) (EW5) RS1/16S0R0JR 620 (B,109,66) RS1/16S0R0JR 621 (B,14,139) (EW5) RS1/16S102J
R 622 (B,12,139) (EW5) RS1/16S102JR 625 (B,20,141) RS1/16S223JR 626 (B,18,141) RS1/16S223JR 627 (B,114,92) RS1/16S102JR 628 (B,13,136) (ES,CN5) RS1/16S104J
R 629 (B,14,136) (ES,CN5) RS1/16S104JR 631 (B,114,91) RS1/16S101JR 632 (B,114,94) RS1/16S101JR 633 (B,24,142) RS1/16S0R0JR 701 (A,16,63) RD1/4PU271J
R 703 (B,49,43) RS1/16S472JR 704 (B,32,26) RS1/16S104JR 705 (B,49,46) RS1/16S472JR 706 (B,49,48) RS1/16S104JR 707 (B,36,29) RS1/16S104J
R 708 (B,47,50) RS1/16S221JR 709 (B,36,24) RS1/16S102JR 710 (B,49,45) RS1/16S221JR 711 (B,37,40) RS1/16S221JR 712 (B,49,42) RS1/16S221J
R 713 (B,35,25) RS1/16S221JR 714 (B,46,53) RS1/16S104JR 804 (B,96,30) RS1/16S222JR 805 (B,89,31) RS1/16S222JR 806 (B,62,17) RS1/16S222J
R 807 (B,62,18) RS1/16S222JR 808 (B,82,39) RS1/16S104JR 811 (B,88,37) RS1/16S473JR 813 (B,92,37) RS1/16S104JR 814 (B,87,37) RS1/16S102J
R 815 (B,85,37) RS1/16S102JR 816 (B,118,19) RS1/16S1R0JR 825 (B,77,49) RS1/16S102J
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5 735 6 7 8
C
D
F
A
B
E
1 2 3 4
R 836 (B,44,11) RS1/16S0R0JR 837 (B,109,48) RS1/16S0R0J
R 841 (B,134,23) RS1/16S103JR 842 (B,135,23) RS1/16S472JR 846 (B,58,44) RS1/16S0R0JR 847 (B,59,42) RS1/16S0R0JR 848 (B,58,50) RS1/16S0R0JR 849 (B,45,20) RS1/16S103J
R 851 (B,34,19) RS1/16S153JR 852 (B,24,19) RS1/16S472JR 853 (B,44,8) RS1/16S222JR 911 (B,20,71) RS1/16S223JR 912 (A,16,78) RD1/4PU152J
R 922 (B,11,110) RS1/16S473JR 931 (B,82,50) RS1/16S104JR 932 (B,113,78) RS1/16S104JR 933 (B,64,96) RS1/16S104JR 934 (B,64,98) RS1/16S473J
R 935 (B,61,91) RS1/16S473JR 936 (B,60,98) RS1/16S473JR 937 (B,63,117) RS1/16S472JR 938 (B,59,125) RS1/4SA102JR 951 (B,106,106) RS1/16S473J
R 952 (B,106,104) (EW5) RS1/16S102JR 953 (B,115,107) (EW5) RS1/16S472JR 955 (A,73,103) (EW5) RD1/4PU153JR 962 (B,102,32) RS1/16S822JR 967 (B,90,36) RS1/16S102J
CAPACITORS
C 153 (B,159,74) CKSRYB224K10C 154 (B,145,78) CKSRYB105K10C 155 (B,163,71) CKSRYB224K10C 156 (B,119,80) CKSRYB105K10C 159 (B,119,79) CKSRYB105K10
C 160 (A,124,83) CEJQ100M16C 162 (A,124,89) CEJQ470M10C 163 (B,124,86) CKSRYB104K25C 165 (A,135,97) CEJQ100M16C 251 (B,50,68) CKSRYB104K25
C 252 (B,44,63) CKSRYB104K25C 253 (B,42,65) CKSRYB103K50C 305 (B,135,113) CKSQYB474K25C 306 (B,127,113) CKSQYB474K25C 307 (B,129,113) CKSQYB474K25
C 308 (B,132,113) CKSQYB474K25C 309 (B,125,134) CKSQYB225K10C 310 (B,127,132) CKSQYB225K10C 311 (A,103,127) CEJQ100M16C 313 (A,51,123) 3 300 µF/16 V CCH1494
C 315 (B,134,117) CKSRYB474K10C 316 (B,125,114) CKSRYB474K10C 317 (B,123,114) CKSRYB474K10C 318 (B,131,117) CKSRYB474K10C 351 (A,130,97) CEJQ2R2M50
C 352 (A,141,97) CEJQ2R2M50C 355 (A,130,103) (ES,CN5) CEJQ2R2M50C 356 (A,147,103) (ES,CN5) CEJQ2R2M50C 401 (A,155,55) CEJQ470M6R3C 402 (B,158,56) CKSRYB103K50
Circuit Symbol and No. Part No.
C 403 (B,157,37) CKSRYB103K50C 404 (B,164,24) (EW5) CKSYB475K10C 405 (A,154,102) CEJQ101M10C 406 (B,167,94) CKSRYB104K25C 407 (B,159,68) CKSRYB103K50
C 408 (A,157,29) CEJQ220M10C 410 (B,157,25) (ES,CN5) CKSRYB474K10C 411 (B,167,92) (ES) CCSRCH470J50C 412 (B,128,135) CKSRYB105K10C 451 (A,119,126) CEJQ330M10
C 501 (A,29,27) 150 µF/6.3 V CCH1781C 502 (A,17,50) CEJQ221M16C 503 (B,24,23) CCSRCH221J50C 504 (B,17,53) CKSRYB105K16C 505 (B,25,31) CCSRCH101J50
C 506 (B,27,35) CKSRYB332K50C 507 (B,28,43) CKSRYB104K25C 508 (B,29,22) CKSRYB105K10C 601 (B,83,46) CCSRCH180J50C 602 (B,87,46) CCSRCH180J50
C 604 (B,101,43) CKSRYB105K10C 605 (A,103,40) CEJQ100M16C 606 (B,112,33) CKSRYB104K25C 607 (A,97,37) CEJQ100M16C 609 (B,110,64) CCSRCH470J50
C 621 (B,21,141) CKSRYB472K50C 622 (B,17,141) CKSRYB472K50C 623 (B,111,93) CKSRYB104K25C 701 (B,21,57) CKSRYB473K25C 703 (A,24,53) CEJQ101M10
C 704 (B,145,67) CKSRYB105K10C 705 (B,127,84) CKSRYB105K10C 708 (A,39,27) CEJQ220M10C 709 (B,48,29) CKSRYB105K10C 710 (B,45,27) CKSRYB474K10
C 720 (B,39,52) CKSRYB105K10C 851 (B,25,12) CKSRYB104K25C 901 (B,54,117) CKSRYB104K25C 911 (A,15,68) CEJQ470M10C 912 (B,21,73) CKSRYB103K50
C 913 (A,24,74) CEAT102M16C 921 (B,12,112) CKSRYB103K50C 922 (A,18,99) CEJQ221M10C 923 (A,16,117) CEJQ101M16C 924 (B,15,115) CKSRYB103K50
C 961 (B,101,36) CKSRYB473K25C 962 (A,93,33) CEJQ100M16
BUnit Number : (EW5)Unit Number : (ES)Unit Name : Keyboard Unit
MISCELLANEOUS
IC 1801 (B,30,113) IC PD6538AIC 1802 (A,30,161) Remote IC(ES) GP1UX51RKD 1801 (B,32,149) Diode MC2848-11D 1802 (B,32,146) Diode MC2846-11
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5741 2 3 4
C
D
F
A
B
E
5 6 7 8
D 1803 (A,26,156) White LED NESW505C-5273
D 1823 (B,12,148) Varistor EZJZ1V800AMD 1824 (B,11,148) Varistor EZJZ1V800AMD 1827 (A,15,29) LED SML-310VTD 1828 (A,15,9) LED SML-310VTD 1829 (A,5,8) LED SML-310VT
D 1830 (A,39,8) LED SML-310VTD 1831 (A,37,17) LED SML-310VTD 1832 (A,26,12) LED SML-310VTD 1833 (A,18,57) LED SML-310VTD 1834 (A,5,144) LED SML-310VT
D 1835 (A,5,161) LED SML-310VTD 1836 (A,36,57) LED SML-310VTD 1837 (A,33,35) LED SML-310VTD 1838 (A,39,28) LED SML-310VTD 1839 (A,17,39) LED SML-310VT
D 1840 (A,18,17) LED SML-310VTD 1841 (A,26,26) LED SML-310VTL 1801 (B,11,151) Inductor CTF1713X 1801 (B,40,124) Ceramic Resonator 5.00 MHz CSS1547S 1801 (A,8,161) Push Switch CSG1155
S 1802 (A,18,8) Push Switch CSG1155S 1803 (A,15,35) Push Switch CSG1155S 1804 (A,36,8) Push Switch CSG1155S 1805 (A,8,7) Push Switch CSG1155S 1806 (A,18,28) Push Switch CSG1155
S 1807 (A,39,60) Push Switch CSG1155S 1808 (A,36,28) Push Switch CSG1155S 1809 (A,15,60) Push Switch CSG1155S 1810 (A,39,35) Push Switch CSG1155S 1827 (A,27,47) Switch (MULTI-CONTROL) CSX1120
LCD1801 (A,18,69) LCD YAW5091
RESISTORS
R 1801 (B,29,74) RS1/16S222JR 1802 (B,30,74) RS1/16S222JR 1803 (B,26,150) RS1/4SA152JR 1812 (B,12,14) RS1/4SA561JR 1813 (B,28,10) RS1/4SA561J
R 1814 (B,8,150) RS1/4SA561JR 1815 (B,25,19) RS1/4SA561JR 1817 (B,18,20) RS1/4SA561JR 1822 (B,35,38) RS1/16S222J
R 1823 (B,37,38) RS1/16S332JR 1824 (B,37,40) RS1/16S822JR 1825 (B,37,41) RS1/16S333JR 1831 (B,35,41) RS1/16S473JR 1832 (B,36,143) (ES) RS1/16S103J
R 1833 (B,40,144) (ES) RS1/16S2R2JR 1834 (B,38,144) (EW5) RS1/16S104JR 1835 (B,36,145) (ES) RS1/16S121JR 1838 (B,30,33) RS1/16S0R0J
CAPACITORS
C 1801 (B,38,141) (ES) CKSYF106Z10C 1802 (B,34,140) CKSRYF104Z25C 1803 (B,32,140) CKSRYF104Z25C 1804 (B,31,140) CKSRYF104Z25
Circuit Symbol and No. Part No.
BUnit Number : (CN5)Unit Name : Keyboard Unit
MISCELLANEOUS
IC 1801 (B,30,113) IC PD6538AIC 1802 (A,30,161) Remote IC GP1UX51RKD 1801 (B,32,149) Diode MC2848-11D 1802 (B,32,146) Diode MC2846-11D 1803 (A,26,156) White LED NESW505C-5273
D 1805 (A,15,30) LED SML-310PTD 1806 (A,15,8) LED SML-310PTD 1807 (A,5,7) LED SML-310PTD 1808 (A,39,9) LED SML-310PTD 1809 (A,36,17) LED SML-310PT
D 1810 (A,28,12) LED SML-310PTD 1811 (A,17,56) LED SML-310PTD 1812 (A,6,144) LED SML-310PTD 1813 (A,5,162) LED SML-310PTD 1814 (A,37,56) LED SML-310PT
D 1815 (A,34,36) LED SML-310PTD 1816 (A,39,27) LED SML-310PTD 1817 (A,18,38) LED SML-310PTD 1818 (A,17,17) LED SML-310PTD 1819 (A,28,26) LED SML-310PT
D 1823 (B,12,148) Varistor EZJZ1V800AMD 1824 (B,11,148) Varistor EZJZ1V800AML 1801 (B,11,151) Inductor CTF1713X 1801 (B,40,124) Ceramic Resonator 5.00 MHz CSS1547S 1801 (A,8,161) Push Switch CSG1155
S 1802 (A,18,8) Push Switch CSG1155S 1803 (A,15,35) Push Switch CSG1155S 1804 (A,36,8) Push Switch CSG1155S 1805 (A,8,7) Push Switch CSG1155S 1806 (A,18,28) Push Switch CSG1155
S 1807 (A,39,60) Push Switch CSG1155S 1808 (A,36,28) Push Switch CSG1155S 1809 (A,15,60) Push Switch CSG1155S 1810 (A,39,35) Push Switch CSG1155S 1827 (A,27,47) Switch (MULTI-CONTROL) CSX1120
LCD1801 (A,18,69) LCD YAW5091
RESISTORS
R 1801 (B,29,74) RS1/16S222JR 1802 (B,30,74) RS1/16S222JR 1803 (B,26,150) RS1/4SA561JR 1804 (B,12,11) RS1/4SA471JR 1805 (B,28,8) RS1/4SA471J
R 1806 (B,5,150) RS1/4SA471JR 1807 (B,28,20) RS1/4SA471JR 1809 (B,21,21) RS1/4SA471JR 1822 (B,35,38) RS1/16S222J
R 1823 (B,37,38) RS1/16S332JR 1824 (B,37,40) RS1/16S822JR 1825 (B,37,41) RS1/16S333JR 1831 (B,35,41) RS1/16S473JR 1832 (B,36,143) RS1/16S103J
R 1833 (B,40,144) RS1/16S2R2J
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5 755 6 7 8
C
D
F
A
B
E
1 2 3 4
R 1835 (B,36,145) RS1/16S121JR 1837 (B,41,18) RS1/16S0R0J
CAPACITORS
C 1801 (B,38,141) CKSYF106Z10C 1802 (B,34,140) CKSRYF104Z25C 1803 (B,32,140) CKSRYF104Z25C 1804 (B,31,140) CKSRYF104Z25
CUnit Number : CWX3527Unit Name : CD Core Unit
(S10.5COMP2-USB)
MISCELLANEOUS
IC 201 (A,36,46) IC PE5611BIC 301 (A,29,15) IC BA5839FPQ 101 (B,58,70) Transistor 2SA1577Q 102 (B,49,58) Chip Transistor 2SB1689X 201 (A,23,38) Ceramic Resonator 16.934 MHz CSS1603
X 205 (B,34,63) Oscillator 48.000 MHz CSS1753S 901 (A,55,37) Switch(HOME) CSN1067S 903 (B,20,59) Switch(DSCSNS) CSN1067S 904 (B,41,68) Switch(12EJ) CSN1068S 905 (B,25,70) Switch(8EJ) CSN1068
RESISTORS
R 101 (B,61,74) RS1/10SR2R4JR 102 (B,61,72) RS1/10SR2R4JR 103 (B,61,71) RS1/10SR2R7JR 104 (B,54,67) RS1/16SS222JR 105 (B,45,58) RS1/16SS102J
R 107 (B,52,60) RS1/16SS105JR 202 (A,27,33) RS1/16SS473JR 203 (A,51,44) RS1/16S473JR 204 (A,24,58) RS1/16SS221JR 206 (B,10,27) RS1/16SS104J
R 209 (B,19,53) RS1/16SS103JR 210 (B,10,23) RS1/16SS102JR 214 (B,50,50) RS1/16SS472JR 216 (B,49,49) RS1/16SS472JR 221 (A,51,48) RS1/16SS103J
R 222 (A,51,46) RS1/16SS103JR 223 (B,14,43) RS1/16SS473JR 225 (A,51,50) RS1/16SS103JR 226 (A,51,51) RS1/16SS393JR 227 (B,48,52) RS1/16SS562J
R 228 (B,45,52) RS1/16SS122JR 229 (B,47,54) RS1/16SS472JR 230 (B,22,25) RS1/16SS0R0JR 232 (B,46,52) RS1/16SS122JR 233 (B,26,59) RS1/16SS103J
R 234 (B,23,26) RS1/16SS473JR 235 (A,26,59) RS1/16SS473JR 237 (A,24,35) RS1/16SS151JR 240 (B,14,26) RS1/16S473JR 241 (B,14,25) RS1/16SS103J
R 244 (B,22,55) RS1/16SS473JR 254 (A,26,64) RS1/16SS104J
Circuit Symbol and No. Part No.R 255 (A,26,63) RS1/16SS104JR 256 (A,26,62) RS1/16SS104JR 259 (A,28,66) RS1/16SS0R0J
R 261 (A,26,65) RS1/16SS104JR 262 (A,30,60) RS1/16SS0R0JR 263 (A,28,63) RS1/16SS0R0JR 280 (B,26,52) RS1/16SS103JR 282 (A,30,61) RS1/16SS240J
R 283 (A,29,61) RS1/16SS240JR 284 (B,30,63) RS1/16SS153JR 285 (B,28,63) RS1/16SS153JR 290 (B,19,47) RS1/16SS103JR 291 (B,43,62) RS1/16SS272J
R 294 (A,32,63) RS1/16SS471JR 307 (A,35,19) RS1/16SS183JR 308 (A,38,19) RS1/16SS183JR 309 (A,35,21) RS1/16SS183JR 310 (A,38,22) RS1/16SS183J
R 601 (B,30,31) RS1/16SS0R0JR 602 (B,27,31) RS1/16SS0R0JR 606 (B,28,23) RS1/16S0R0JR 701 (B,12,37) RS1/16SS221JR 702 (A,24,56) RS1/16SS221J
R 708 (B,15,37) RS1/16S0R0JR 712 (B,15,54) RS1/16SS0R0JR 713 (B,15,53) RS1/16SS0R0J
CAPACITORS
C 106 (B,57,67) CKSQYB475K6R3C 202 (A,28,57) CKSSYB104K10C 204 (A,24,59) CKSSYB103K16C 205 (B,27,41) CKSQYB475K6R3C 206 (A,23,41) CKSSYB104K10
C 207 (A,25,38) CKSRYB104K16C 209 (B,36,35) CEVW220M6R3C 210 (B,29,37) CKSSYB104K10C 211 (A,28,35) CKSSYB104K10C 212 (A,29,30) CKSRYB104K16
C 213 (A,46,39) CKSSYB104K10C 214 (A,29,34) CKSSYB104K10C 216 (A,51,52) CKSSYB332K50C 217 (A,48,52) CKSSYB104K10C 218 (A,50,52) CKSSYB473K10
C 219 (A,47,54) CKSSYB104K10C 220 (A,48,54) CKSSYB182K50C 221 (A,46,54) CKSSYB104K10C 222 (B,46,54) CCSSCH560J50C 223 (B,48,54) CCSSCH4R0C50
C 224 (A,45,56) CKSSYB104K10C 226 (A,42,59) CCSSCH680J50C 227 (A,42,61) CCSSCH470J50C 228 (B,41,62) CKSSYB103K16C 229 (B,48,60) CKSSYB104K10
C 236 (A,50,58) CKSSYB104K10C 239 (B,47,52) CCSSCH220J50C 240 (A,38,61) CKSSYB104K10C 243 (B,22,41) CKSQYB475K6R3C 250 (A,52,48) CKSSYB102K50
C 251 (A,52,46) CKSSYB102K50
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5761 2 3 4
C
D
F
A
B
E
5 6 7 8
C 260 (A,28,61) CKSSYB104K10C 261 (B,34,67) CCSSCH8R0D50C 262 (B,32,66) CCSSCH8R0D50C 293 (B,44,61) CKSSYB102K50
C 303 (A,36,19) CKSSYB472K25C 304 (A,36,21) CKSSYB223K16C 307 (A,22,11) CKSRYB104K16C 308 (B,11,18) CKSRYB105K10C 703 (B,15,35) CCSSCH101J50
C 704 (B,12,36) CKSSYB102K50C 711 (A,31,25) CKSSYB104K10
Miscellaneous Parts List
Pickup Unit(P10.5)(Service) CXX1942M 1 Motor Unit(SPINDLE) CXC7134M 2 Motor Unit(LOADING/CARRIAGE) CXC4026
Circuit Symbol and No. Part No.
DEH-4000UB/XS/EW5 775 6 7 8