orbitalum toolsgmbhJosef-Schuettler-Str.1778224SingenGermanyTel.+49(0)7731792-0Fax+49(0)7731792-524www.orbitalum.com

5

The GF series sets new standards in orbital tube and pipe machining!

Also available with automatic or manual feed

modulesAVM/MVM

Multifunctional wrench. 1tool=6functions:

Vicehandle,fasteningclampingjaws,sawblades/bevelcutters,

andquickmountingplate; anti-theftprotectionaswellasblade adjustment with the star

handle

2 position clamping jaws to enable the machining of

thin-walledtubes

Integrated line laser to determine the cut off

point

Pipe Cutting and Beveling Machines GF

6

orbitalum toolsgmbhJosef-Schuettler-Str.1778224SingenGermanyTel.+49(0)7731792-0Fax+49(0)7731792-524www.orbitalum.com

GF Pipe Cutting and Beveling Machines• Square, burr-free and cold machining process• Deformation-free clamping system for tubes and pipes• Optimum preparation for the automated welding process• Sturdy design with powerful drive• Unique and automated orbital cutting process• Simultaneous or seperate cutting and beveling• Cost-effective, increasing productivity• Even longer tool life

GF 4, GF 6 (AVM/MVM)

The new GF series sets new standards in orbital pipe machining.Numerous innovative functions combined with an ergonomic design create significant advantages for you in the industrial prefabrication of pipeline systems. Cutting and bevelinghigh-alloysteel(stainlesssteel),low-andunalloyedsteel,plastics,castingmaterialsandnon-ferrousmetalsinjustseconds,usingthe“PlanetaryCutting”method.

• Anthracite-coloredcoatedcomponentsforimprovedslidingpropertiesandprotectionagainst corrosion

• Stainlesssteelclampingattachments(Code790142241)forprotectionagainstcontactcorrosion included

• ReducedoperatorimpactbyoptionalfeedmoduleAVMorMVMforanautomatedormanual cutting process

• Lockingmechanismpreventsunauthorizedusageandtheft• Anewergonomically-designedmotorhandleforasafeandcomfortableoperating

position, which also enables easy cutting of elbows• Integrated line laser to determine the cut off point• 2positionclampingjawstoreducechatterandenablesmallerlengthofpipetobemachined• 1multifunctionaltoolforalladjustmentsonthemachine• Extendedspeedrange(65-215rpm),idealforthecuttingofhigh-performancematerials

(Hastelloy®,P91,etc.)• Swivelcablewithaquick-disconnectcouplerforeasyandquickreplacementofpower

cables• The new chip guard protects against flying chips and comes with a measuring port

(forGF4only)

Feed versions:

GF AVM*Pipe Cutting and Beveling Machine with automatic feed module AVM. This intelligent solu-tioncontinuouslycontrolsthecuttingspeeddependingonthetorqueandtheparametersettings.TheAVMimprovesthehandlingoftheGFandRAmachineandstopsautomati-callyafterthecuttingprocess.Therestartinhibitdoesnotallowanunintendedstart-up.

GF MVM*Pipe Cutting and Beveling Machines with manual feed module MVM. This manually operated feed module facilitates the cutting and beveling of pipes. With the help of a hand wheel, the machine head rotates easily and with little effort around the pipe with a constant speed.

Machine comes with: • 1PipeCuttingandBevelingMachineGF4orGF6(AVM/MVM)*• 1Transportationcase• 1Sawblade(GF4:Code790042064,GF6:Code790043018)• 1Setofstainlesssteelclampingattachments

Pipe Cutting and Beveling Technology

GF 4 MVM

GF 4 AVM

GF 4

7

orbitalum toolsgmbhJosef-Schuettler-Str.1778224SingenGermanyTel.+49(0)7731792-0Fax+49(0)7731792-524www.orbitalum.com

• 1Mountingplate• 1Toolset• 1TubeofsawbladelubricantGFTOP(Code790060228)• 1Bottleofspecialgearoil(Code790041030)• 1Setofoperatinginstructionsandsparepartslist

* The automatic/manual feed module AVM/MVM is already fitted to the pipe cutter upon delivery

Allsawsarefittedwiththequickdisconnectswivelcable.

Application range GF 4 (AVM/MVM) GF 6 (AVM/MVM)PipeOD 12-120mm

0.472-4.724inch21.3-168.3mm0.839-6.626inch

Wallthickness(dependsonmaterial)*

1-9mm0.039-0.354inch

1.5-15mm0.059-0.591inch

PipeIDmin.(sawbladeØ63mm/Ø2.480inch)

21mm0.827inch

30mm1.181inch

PipeIDmin.(sawbladeØ68mm/2.677inch)

16mm0.630inch

25mm0.984inch

PipeIDmin.(sawbladeØ80mm/3.150inch)

4 mm0.157inch

13mm0.512inch

PipeIDmin.(sawbladeØ100mm/3.937inch)

––

0mm0inch

Technical data Drivewithsingle-phaseACmotorPower 1.8kWwithoutAVM/1.9kWwithAVMBuilt-inelectronicvariablecuttingspeed with restart inhibitor

65-215rpm 65-215rpm

Protection class Double-insulatedaccordingtoclassII,DINEN60745-1Double-insulatedaccordingtoclassI,DINEN60204-1(GFAVM)

Noiselevelattheworkplaceapprox. 79dB(A) 79dB(A)Vibrationlevel <2.5m/s2inaccordancewithDINEN28662,part1

* Increased wall thickness possible with manual feed or by adding an additional cut (depending on the saw blade diameter).

Article Version Code Weight of machinekg

Dispatch weight kg

GF 4 230V,50/60HzEU 790 142 001 61.300 88.000GF 4 120V,50/60HzEU/US 790 142 002 61.300 88.000GF4AVM 230V,50/60HzEU 790 142 011 70.500 98.000GF4AVM 120V,50/60HzEU/US 790 142 012 70.500 98.000GF4MVM 230V,50/60HzEU 790 142 021 66.600 98.000GF4MVM 120V,50/60HzEU/US 790 142 022 66.600 98.000GF6 230V,50/60HzEU 790 143 001 92.700 140.000GF6 120V,50/60HzEU/US 790 143 002 92.700 140.000GF6AVM 230V,50/60HzEU 790 143 011 101.700 153.000GF6AVM 120V,50/60HzEU/US 790 143 012 101.700 153.000GF6MVM 230V,50/60HzEU 790 143 021 97.800 147.000GF6MVM 120V,50/60HzEU/US 790 143 022 97.800 147.000

Pipe Cutting and Beveling Technology

GF 6 MVM

GF 6 AVM

GF 6