MODIFIED POLYISOCYANURATE RIGID THERMAL INSULATIONHIGH R-VALUE INSULATION PANEL WITH FIBRE CEMENT

PIRmax HRFC-PANELTECHNICAL DATA

PIR III P I R P A N E L S

PTY LTD

TM

refleI N S U L A T I O N

™

PIRmax HRFC PANEL is a modified PIR (Polyisocyanurate) rigid thermoset insulation laminated with a 6mm fibre cement.PIRmax HRFC PANEL consists of one side recessed or straight edge 6mm fibre cement and foil on the reverse side adhesively bonded to the PIR core. Alternative linings, such as 9mm fibre cement or plasterboard, can also be used upon request.

PIRmax HRFC PANEL is designed to achieve excellent thermal value where minimal cavity is required giving buildings continued thermal efficiency throughout their life span. PIRmax HRFC PANEL is easy to handle and allows fast fixing to any application. Fully compliant to the Australian National Construction Code.

PIRmax

HRFC-Panel

PRODUCT INTRODUCTION

PIRmax HRFC PANEL is CFC free with zero Ozone Depletion Potential (ODP) and contains zero Volatile Organic Compounds (VOC’s) and is manufactured in Australia.

4 Complies with AS/NZS 4859.1.

4 Australian made & utilising chemicals and raw materials from Australian companies.

4 Amongst the highest thermal values of rigid board insulation due to the product’s low thermal conductivity.

4 Group 1 Classification in accordance with Specification C1.10 of the Building Code of Australia (BCA) 2015, tested to AS/NZ 3837:1998.

4 Not corrosive to metal over time.

4 Able to custom manufacture to different sizes and facings.

4 Fast manufacturing turnaround times.

ApplicationsSoffit (Carpark Application), Wall Insulation.

ConstructionPIRmax HRFC PANEL is a modified PIR (Polyisocyanurate) rigid thermal panel laminated with an aluminium foil laminate to one side of the board, and a 6mm fibre cement to the other side of the board.

Australian MadePIRmax HRFC PANELS are manufactured by an Australian owned and operated company, and guarantee the highest quality insulation material. We also source our raw materials and chemicals from Australian companies wherever possible. As our products are wholly Australian Made we take pride in our manufacturing to ensure a high standard of quality, service and value.

PRODUCT INTRODUCTION PRODUCT SPECIFICATIONS

PIRmax HRFC PANEL Product Data

Thermal Conductivity: Insulation: 0.020 W/mK

Fibre Cement: 0.33 W/mK

Emittance E0.03 (silver foil face)

Edge Treatment Fibre cement recessed edge and square edge PIR (Fibre cement also available in square edge)

PIRmax HRFC PANEL Specification Notes

When specifying, state the following:

Product Name: PIRMAX HRFC PANEL _____mm The insulation to be installed shall be PIRMAX HRFC Panel PIR insulation laminated with fibre cement, comprised of Modified Polyisocyanurate Rigid Panel with 6mm fibre cement facing on one side and a foil facing on the other, and an R Value of _____. Product is Australian Made, manufactured by PIRMAX Pty Ltd and shall be installed in accordance with manufacturers installation instructions.

PIRmax HRFC PANEL Product R-Values

Product Thickness Product R-Value

PIRMAX HRFC 31mm R1.3

PIRMAX HRFC 36mm R1.5

PIRMAX HRFC 46mm R2.0

PIRMAX HRFC 56mm R2.5

PIRMAX HRFC 66mm R3.0

PIRMAX HRFC 76mm R3.5

PIRMAX HRFC 86mm R4.0

PIRMAX HRFC 96mm R4.5Custom thicknesses are available on request to meet certain R Value requirements

PIRmax HRFC PANEL Product Details

Product Name PIRMAX - HRFC Panel “modified PIR rigid thermal insulation with fibre cement”

Product Code PIRMAX HRFC ______ (mm)

Thickness (inc. Fibre Cement) 31mm / 36mm / 46mm / 56mm / 66mm / 76mm / 86mm / 96mm

Panel Size 2400mm x 1200mm (2.88m2);

2700mm x 1200mm (3.24m2);

3000mm x 1200mm (3.6m2). Other dimensions available upon request.

Facings Fibre Cement/Aluminium Foil (Silver). Fibre cement sheet laminated to one side and aluminium sheet on the other. Other finishes available upon request, eg. 9mm Fibre Cement Sheet, Water Resistant (WR) board, 13mm Plasterboard etc.

PIRmax HRFC PANEL Product Testing

Complies to AS/NZ 4859.1 and NCC/BCA Compliant

Group Classification AS 5637.1 Group 1

Ignitability Index* AS 1530.3 0 Range 0-20

Spread of Flame Index* AS 1530.3 0 Range 0-10

Heat Evolved Index* AS 1530.3 0 Range 0-10

Smoke Developed Index* AS 1530.3 1 Range 0-10

Compressive Strength* AS 2498.3 >125 (kPa)

Water Vapour Resistivity ASTM E96 >100 (MNs/gm)

*(Applies to the PIR core)

AUSTRALIAN OWNED AUSTRALIAN MANUFACTURED

GENERAL INSTALLATION GUIDE

Vers2.2

AUSTRALIAN OWNED, AUSTRALIAN MANUFACTURED. Manufactured by: PIRMAX Pty Ltd 9/170 Boundary Road, Braeside VIC 3195 T: 03 9587 0955 F: 03 9587 0966 E: pirmax@bigpond.com © 2016 Reflex Insulation Pty Ltd All Rights Reserved. Disclaimer: The installer/user of these products will need to determine if the product is suitable for the use in the intended application. Information on this brochure is believed to be correct at the time of publication. Pirmax Pty Ltd take no responsibility for the misinterpretation, misuse and misrepresentation of information provided on this brochure. Pirmax Pty Ltd reserves the right to change the content of this publication without any notice.

Under Soffit Installation

PIRMAX HRFC Panel must be installed in accordance with AS2908.2:1992 Cellulose Cement Products.

INSULATION FASTENERS

PIRMAX HRFC Panel can be fully secured to a concrete soffit by the use of approved insulation fasteners. 11 insulation fasteners is recommended and the insulation fasteners must have a minimum head diameter of 25mm.

The material of the fixings should also be appropriate for the application, exposure and fire rating as advised by the fixing manufacturer.

DIRECT FIXING TO SOFFITS

1. The fasteners should be evenly distributed over the whole area of the board. Install 4 fasteners

evenly across each length, no less than 50mm and no greater than 150mm in from the edge. Install 3 fasteners along the centre of the board as per the diagram. Board joints can be either staggered or squared.

2. Installers should check their specific project to make sure there are not any non-standard fixing requirements. Where the board may be subject to external wind pressure, the requirement for additional fixings should be assessed in accordance with appropriate Australian wind load standards.

PENETRATIONS

If there are fire collar penetrations in the soffit, then a clearance of a minimum of 25mm must be maintained between the fire collar and the insulation board.

11 insulation fastener pattern (recommended)

Distributed by:

South Australia / Northern TerritoryFax: (08) 8284 1293PO Box 77, Salisbury South BC SA 5106Churchill Rd North, Cavan SA

Western AustraliaFax: (08) 9467 0570PO Box 1677, Canning Vale DC WA 6970Kurnall Rd, Welshpool WA

Email: info@reflexinsulation.com.au

New South Wales / ACTFax: (02) 4623 1616PO Box 377, Narellan NSW 2567Woodpark Rd, Smithfield NSW

Phone: 1300 720 185refleI N S U L A T I O N

™