plan of action testfest #2 pki-security v0 · the second testfest will work on security/pki and...

Plan of Action TestFest #2 PKI-Security v0.4

Grant Agreement No: INEA/CEF/TRAN/M2015/1143833 Action No: 2015-EU-TM-0159-S

Plan of Action Testfest #2 PKI-Security

draft 2 © InterCor Consortium

Control sheet

Version history

Version Date Main author Summary of

changes

0.1 Nov 30, 2017 Hacène Fouchal Initial draft

0.2 H. Labiod 17/12/17

0.4 Jan 26, 2018 Hacène Fouchal

Adaptation of

figures, references

to additional

documents

Prepared

Reviewed

Authorised

Circulation

Recipient Date of submission

INEA

InterCor consortium

Authors (full list):



Project Coordinator

Ronald Adams

Rijkswaterstaat

Office address: Toekanweg 7, 2035 LC, Haarlem (NL)

Postal address: Postbus 2232, 3500 GE, Utrecht (NL)

Mobile: +31 6 518 480 77

Email: [email protected]

Legal Disclaimer

The information in this document is provided “as is”, and no guarantee or warranty is given

that the information is fit for any particular purpose. The content of this document reflects

solely the views of its authors.

The InterCor consortium members, jointly or individually, shall have no liability for damages

of any kind including, without limitation, direct, special, indirect, or consequential damages

that may result from the use of these materials.

Neither the European Commission nor the Innovation and Networks Executive Agency

(INEA) are liable for any use that may be made of the information contained therein.



TABLE OF CONTENTS



LIST OF FIGURES



LIST OF TABLES



Terms and abbreviations

To be updated

Term / Abbreviation Definition

AC Advisory Committee

AL Activity Leader

ASR Action Status Report

CMT Core Management Team

EC European Commission

GA Grant Agreement

INEA Innovation and Networks Executive Agency

IPR Intellectual Property Right

CMT Core Management Team

ML Milestone Leader

MS Member State

PC Project Coordinator

TIC Technical & Interoperability Coordinator



1 Introduction

This document is the plan of action for the InterCor PKI-Security TESTFEST, to be held in

April 23rd – 26th, 2018.

The aim of this document is to inform TESTFEST joint project team members as well as

participants1 of the TESTFEST about the TESTFEST scope and objectives, the site, the test

scenarios, the time schedule and other relevant items.

Université de Reims Champagne-Ardenne has drafted this document in cooperation with

SANEF, Telecom-ParisTech and IDNomic. The TESTEFEST#2team is composed of these 4

entities.

The scope of this document is primarily the event itself. For information on the project

InterCor, in which the UK, France, Belgium (Flanders) and the Netherlands cooperate, refer

to [2]

Figure 1 illustrates the most relevant parts of the InterCor-project-organization, under

responsibility of RWS, for the TESTFEST. In InterCor, the TESTFESTs are part of Activity 2,

Pilot Preparation. Totally there are four TESTFESTs in this project. This document focuses

on the second TESTFEST, which concerns PKI-Security scenarios and which is hosted by

the Université de Reims Champagne-Ardenne (partner of the InterCor project). Within

Activity 2 of InterCor, sub-activity 2.1c PKI Specification works on the specifications for PKI

to be used within the InterCor project. These specifications will be the base for the

TESTFEST and will be shared with all (registered) participants of this event2. Sub-activity 2.2

of InterCor focuses on carrying out the TESTFEST itself and does the reporting on the tests.

The TESTEFEST#2 team prepares the test-site for this event. Under the responsibility of the

test-site manager on highways A4-A344 around Reims, a number of services will be active,

based on the common specifications of services and PKI defined in InterCor.

2 Registered public and private organisations (road operators, systems suppliers, services providers, vehicle manufacturers, etc.) that take part i.e. by bringing their own on-board units (suitable for the services) and vehicles



In this context also C-ROADS should be mentioned. The C-ROADS Platform is a EU

member state driven platform, with the objective to harmonise C-ITS deployments across

Europe. In this respect several implementation projects on completely different levels are

cooperating and contributing to the C-Roads Platform, with their results regarding tests,

evaluations and deployment. All four countries in the InterCor project participate in C-ROADS

and contribute to this platform, in order to reach further EU-harmonisation

1.1 Cooperation with ESTI Plugtest 2018 and Scoop@F Cross-Test

The ETSI Plugtest dedicated to C-ITS security may (agreement pending) be held in the

same period in Reims as well the international Scoop@F CrossTest involving four countries

of the scoop project (FR, AU, ES, PL).

The ETSI support on test expertise will be of high interest for the InterCor and the scoop

projects. Common scenarios could be designed in order to optimise these 3 events.

1.2 InterCor Contractual References

InterCor (Interoperable Corridors) links the C-ITS corridor initiatives of the Netherlands

(among which the C-ITS Corridor Netherlands-Germany-Austria), the French (among which

the one defined in SCOOP@F) and extends to the United Kingdom and Belgium C-ITS

initiatives.

InterCor is an action co-financed by the European Union under the Grant Agreement number

INEA/CEF/TRAN/M2015/1143833. The Project duration is 36 months, effective from the 1st

of September 2016 until the 31st of August 2019. It is a contract with the Innovation and

Networks Executive Agency (INEA), under the powers delegated by the European

Commission.

Communication details of the Agency:

Any communication addressed to the Agency by post or e-mail shall be sent to the following

address:

Innovation and Networks Executive Agency (INEA)

Department C – Connecting Europe Facility (CEF)



Unit C3 Transport

B - 1049 Brussels

Fax: +32 (0)2 297 37 27

E-mail addresses: General communication: [email protected]

For submission of requests for payment, reports (except ASRs) and financial statements:

[email protected]

Any communication addressed to the Agency by registered mail, courier service or hand-

delivery shall be sent to the following address:

Innovation and Networks Executive Agency (INEA)

Avenue du Bourget, 1

B-1140 Brussels (Evere)

Belgium

TEN-Tec shall be accessed via the following URL:

https://webgate.ec.europa.eu/tentec/

All communication with the INEA or the European Commission shall be done via the Project

Coordinator, Mr. Ronald Adams.



2 TESTFEST#2 Security-PKI description 2.1 InterCor Overview

[1] [2] Being a part of Intelligent Transport Systems, cooperative ITS (C-ITS or cooperative

systems) encompass a group of technologies and applications that allow effective data

exchange through wireless communication technologies between components and actors of

the transport system, very often between vehicles (vehicle-to-vehicle or V2V) or between

vehicles and infrastructure (vehicle-to-infrastructure or V2I).

The deployment of C-ITS is an evolutionary process that will start with the less complex use

cases. These are referred to as “Day-1-services”, encompassing messages about traffic

jams, hazardous locations, road works and slow or stationary vehicles, as well as weather

information and speed advises to harmonise traffic. Using probe vehicle and infrastructure

related data, all C-ITS services shall be transmitted directly into the vehicles in a way that

allows users to get informed but not distracted.

InterCor Action aims to streamline C-ITS implementation in four EU member states (MS)

linking the different national initiatives towards a harmonized strategic rollout and the use of

common specifications. C-ITS pilot sites able to send data through ITS-G5 and/or cellular

networks will be installed in the Netherlands, Belgium (Flanders), UK and France, for the

operation and evaluation of C-ITS services.

InterCor initially focuses on the deployment of “Day-1” services as recommended by EC “C-

ITS platform” such as Road Works Warning. Green Light Optimized Speed Advisory, In

Vehicle Signage and Probe Vehicle Data. In the second phase, it will also test other logistic

services such as Multimodal cargo optimization, Truck Parking and Tunnel logistics.

The InterCor Action is a study project with three main pilot activities:

• Pilot Roll out Preparation • Pilot Operations • Pilot Evaluation.

InterCor will commence with activity 2, the pilot preparations by developing a set of common

specifications for ITS-G5, Hybrid communication, PKI and C-ITS services on logistics and

traffic management and validating them in interoperability testing events (TESTFESTs) in the

four member states with the overall aim to deliver roll out guidelines for future deployment. In

the third activity, the project coordinates the pilot operations in the four member states by

providing a common pilot framework and rolling out the set of common specifications. In the



fourth activity, called Pilots Evaluation, the study will provide a common evaluation

framework for all member states and deliver a technical evaluation, impact assessment and

user acceptance for the pilots in the four member states.

The first InterCor TESTFEST has worked on ETSI-G5 and has been organized, under

responsibility of RWS, by member state: The Netherlands.

The second TESTFEST will work on Security/PKI and will be organized, under responsibility

of Université de Reims Champagne-Ardenne, by member state France. Even the TESTFEST

is part of subactivity 2.2, other InterCor (sub)-activities are also involved and play an

important role, in particular subactivity 2.1c (PKI specifications).

The following table summarizes the functionalities to be tested during TESTFEST PKI

security.

Functionality The Netherlands France Belgium UK

Message signature/verification x x x

Use of Pseudonym certifcates x x x

Trust chain verification x x x

Table: Security-PKI functionalities

2.2 Objectives of TESTFEST #2

The objective of this TESTFEST is to validate the interopereability of the PKI specifications

defined within the InterCor project (subactivity 2.1c).

2.2.1 Main descriptions

This set of specifications needs to be validated against its main goal being to ensure the roll

out of internationally interoperable security and PKI functions. The validation is done, as

usual for functionalities based on specifications, by testing the interoperability of user devices

(Vehicle ITS stations) from the four Member states at one test location. This TESTFEST is a

second of a set of 4 TESTFEST interoperability events that have to be carried out, to assess

the quality of the common set of specifications and consistency with the resulting ITS station

and service application implementations.



The focus is on service interoperability rather than on product interoperability, as OBUs from

several vendors from different countries will interoperate with a fixed set of RSUs at a test

site in France. Each TESTFEST will provide a report, describing the test setup and

summarising the outcome of this TESTFEST event.

Each TESTFEST event will be used as an indicator to assess the completion of the set of

specification at each stage of the activity 2.1.

The TESTEFEST#2 Security/PKI s expected to validate the common certificated policy (CP).

2.3 Preconditions

• Participation is non-exclusive for InterCor members. Invitations will be sent to all

interested actors.

• Participants take part in the TESTFEST at their own expense.

• Because of time and budget constraints, other use cases than described in this

document, will not be included for testing in this TESTFEST.

• Participants shall allow the use of all data transmitted for research and evaluation

purposes by the InterCor and the Scoop@F projects [5].

• All information that will be made available to the participants is public [5].

• During the tests on the highway, participants do not have a special status. They are

normal road-users, who have to obey all traffic rules [5].

• SANEF is responsible for maintaining safety on-site. All participants are to follow

generic French as well as specific site safety instructions [5].

• It is expected, that participants in the TESTFEST share their findings during the tests

(only those related to the common specifications). Those findings – made anonymous

on request - can be used for the reporting on the TESTFEST.

• The organisation of the TESTFEST cannot take any responsibility, if tests cannot be

carried out according to the planning, because of e.g. unexpected events on the

highway or unexpected failure of equipment.

• ITS-Stations are assumed to be compliant to standards, e.g. be able to pass the ETSI

plug tests. Compliancy is the responsibility of the participant; there will be no entry

tests.

• Participants should preferably bring their own vehicle. If they cannot do so, they

should bring OBUs with the complete periphery (cables, power supplies, adaptors,

antennas etc.).



2.4 TestFest Participants

As of Jan 15th, 2018, the following participants have registered to take part in the TESTFEST:

Organization

Member State # OBUs # Vehicles

URCA France 2

SANEF France 1

DIRIF France 1

PSA France 1

Renault France 1

DIRO France 1

2.5 Side programme participants

As of of Jan 15th, 2018, the following participants have registered to take part in the Side

programme:

Name Organization (Member State)

Houda Labiod TPT, FR

Mounira Msahli Idnomic, FR

Marie Christine Esposito DIT, FR

Guy Fremont SANEF, FR

Atika Rivenq U. Valenciennes, FR

Hasnaa Annis IFSTAAR, FR



3 Site

3.1 Description of the test site

The test site is located at the campus Moulin de la Housse, Université de Reims

Champagne-Ardenne, Rue des Crayères, 51100 Reims as shown in the Figure 2 below.

Building 17 will host the lab test as well as offices for the Testfest.

There is a room for each country. Another large room will be dedicated to general

presentations. Another large room for breaks and networking is available.

A RSU will be available on the building and will help participants during lab tests setup.

Figure 2 : Testfest headquater

3.2 Description of the Field test

The field test is composed of a parking having a distance of 400m that could be used to

setup some tests. The RSU of the building will deliver secure messages and the vehicles

could check the reception and the decoding of these messages.

3.3 Open road test trajectory

The trajectory to be followed by participant will start from the Campus and drives to reach the

highway at junction “Saint Rémi” on E46 highway. Drive direction Paris till “Gare de péage

Thillois” (Automatic Toll system). Go through the toll system and choose the left side



direction “Strasbourg”. The first RSU is located nearby. Drive 11 Km along the A4 highway

following the direction Strasbourg. After 5 Km (the precise location will be indicated) another

RSU is found which will deliver some other DENMs. After 6km leave at junction (A4-A344),

go through the toll system (the third RSU is located nearby) and drive on the A344 (E46) till

junction “Saint-Rémi”. Go back to the Campus by following “Université”.

See the main Figure on Testefest-Reims-trajectory.pdf document on the project place for

more details. The document TESFEST Reims.kmz describes the location of involved RSUs

on GeogleEarth.

3.4 Validation of the test side

The lab test part has been used since 2 years within the scoop project. The test side is ready

for lab test and site test.

The road field pre test will held with local French partners on March 15th and 16th, 2018.

3.5 Project support team

This list will later on be customized for the participant’s version of the plan of action including only names of people relevant for the participants. Names already in bold will be (probably permanently) on site because of their specific responsibility.



Name

Organization Role Phone number E-mail

Hacene Fouchal URCA TESTFEST leader ++33 6 12 58 02 53 [email protected]

Houda Labiod TPT TESTFEST leader Mounira Msalhi Idnonmi TESTFEST leader Ronald Adams

InterCor Projectmanager

InterCor

+31 6 51848077 [email protected]

Fred Verweij InterCor Sr. advisor


Giacomo Somma

Ertico/InterCor TESTFEST leader [email protected]

Peter Schmitting

Ertico/InterCor TESTFEST leader +33 6 08515187 [email protected]

Peter Paul

Schackmann

InterCor InterCor Activity

leader 2


Bart Netten

InterCor Leader evaluation

(NL)

[email protected]

Tommy van Dijk

Compass Projectmanager +31 6 22733099 [email protected]

Kees van Walraven Swarco Engineer CU [email protected]

3.6 Test Center facilities

The center is located in Campus Moulin de la Housse at Building 17.



3.7 Internet access

WiFi access is available in the building.

3.8 Evaluation

See document PK-security TESTFEST Evaluation.pdf provided by activity 4.0. Test scenarios



4 Introduction and general approach

The main objective of the tests is to verify messages authentication and validate the trust

chain as illustrated in Figure 1.

Figure 1: Trust chain validation

We consider signed messages exchanges with preloaded ATs and preloaded common

InterCor_CTL and InterCor_CRL.

4.1 Test configuration

In TESTFEST#2 PKI-Security, the direct interaction between ITS stations and the PKIs is not

considered. The needed certificates (ATs) as well as the InterCor_CRL and the

InterCor_CTL are preloaded in each ITS station and are ready to be used.

Initial registration of ITS stations (vehicles) and ITS stations (RSU) are also done.

Construction and upload of the InterCor_CTL and InterCor_CRL into the ITS station will be

done manually.

4.1.1 Certificate formats

Certificate data structure formats for TESTFEST#2 partners are as follows:

NL FR

ETSI TS 103097

Security header and

certificate formats

Version: 1.2.1 Version: 1.2.1

4.1.2 Common InterCor_CTL and InterCor_CRL formats

The adopted formats are as follows:



NL FR

CRL ASN.1 notation

definition

SCOOP_2446.pdf

See section 3.2.6 in [1]

SCOOP_2446.pdf

see section 3.2.6 in [1]

CTL ASN.1 notation definition

SCOOP_2446.pdf

See section 3.2.7 in [1]

SCOOP_2446.pdf

see section 3.2.7 in [1]



5 General information

5.1 Time schedule

Refer to Time schedule for PKI-Security Testfest2.pdf available on project plan.

5.2 Visitor information

The test center is 3 km away from the city center. Hotels are available in the city center.

5.3 Access and route description

The test center can be accessed either by car or by public transport. The test centre is

located at Building 17, Campus Moulin de la Housse, Reims.

Coming

from Paris

• Follow the A344 motorway (direction: Strasbourg). • Take the exit 16

Coming

from

Strasbourg

• Follow the A344 motorway (direction: Paris). • Take the exit 16

Public

transport

• From Reims central train station, take city bus 2 (direction Moulin de la Housse).

• Exit at bus stop Moulin de la Housse. Walk for 5 minutes:

Taxi • From Reims central train station, a metered cab to the test centre will charge you about € 15 (7 minutes ride)

5.4 Airports

Nearby airports serving international flights include:

Airport

Road distance to test centre

Charles de Gaulle Airport 120 km Orly Airport 140 km Vatry Airport 60 km



5.5 Hotels

Reims city center hotels are recommended.

5.6 Catering

During the TESTFEST, all TESTFEST participants will be provided with coffee, tea and water and refreshments. Lunch will be served daily from 12:30 till 13:00h.

From 15:00h a selection of cold drinks will be available. There will be no alcoholic beverages.

5.7 Amenities

For participants only the following amenities will be available:

Amenity

Description

Internet access At the test site, Broadband WiFi wireless access will be available trough:

Hotspot: TESTFEST-2

Password: testfest-urca2 Project share The TESTFEST information share can be found at:

plan of action testfest #2 pki-security v0 · the second testfest will work on security/pki and...

Documents