plana-14160

2
248 Devices Dimmers - TECHNICAL CHARACTERISTICS 14160 - 14161 Dimmers Technical specifications Switch on, regulation and switch off through built-in push but- ton or non-luminous NC push buttons. • Lighting level is saved when switched off (unless there is a blackout). •Soft start: ensures a gradual lighting from zero to maximum or preset lighting levels. • Soft end: ensures a gradual passage from light to dark. • Protection against short-circuit when switch on and overriding with blow-out indication • MASTER-SLAVE function: so long as the maximum permis- sible load of each dimmer is not exceeded, a single MASTER dimmer can be combined with up to 4 SLAVE dimmers for a total maximum load of 2500 W (VA) corresponding to 500 W/VA max connected to each of the 5 dimmers. •SLAVE dimmer has to be connected to a MASTER dimmer to operate. Controllable loads halogen and incandescent lamps: 40-500 W 230 V~ 50 Hz. • ferromagnetic transformers for low-voltage halogen lamps: 40-500 VA 230 V~ 50 Hz. • electronic transformers VIMAR 01860.60 max 4, or 01860.105 max 3 Conformity to Standards LV Directive EMC Directive EN 60669-2-1 Standard 14162 Dimmer Technical specifications Switch on, regulation and switch off through built-in push but- ton or non-luminous NC push buttons. • Lighting level is saved when switched off (unless there is a blackout). •Soft start: ensures a gradual lighting from zero to maximum or preset lighting levels. • Soft end: ensures a gradual passage from light to dark. • Protection against short-circuit when switch on and overriding with blow-out indication. Controllable loads • electronic transformers VIMAR 01860.60 max 5 or 01860.105 max 3 or capacitive response electronic transformers : 40-300 VA 230 V~ 50 Hz (max 5 transformers). Operating • the device is switched on and off by lightly placing a finger on the front and then taking it off. • It is regulated by keeping your finger on the front of the device, to reverse the direction of adjustment, take your finger off and then place it back on again immediately. When maximum or minimum load is reached, regulation stops and can be inver- ted by taking your finger off and placing it back on again. 14416 14160 P L N S L N 14416 14160 Master 14416 14161 Slave For a correct operating the distance between MASTER and SLAVE dimmers or NO push buttons should not exceed 100 m. Conformity to Standards LV Directive EMC Directive EN 60669-2-1 Standard C L N 14416 14162 14160 - Control and regulation from several points with NO push buttons 14161 - Control and regulation with SLAVE dimmer 14162 - Control and regulation from several points with NO push buttons

Upload: dan-popescu

Post on 28-Apr-2015

34 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PLANA-14160

248

DevicesDimmers - TECHNICAL CHARACTERISTICS

14160 - 14161 DimmersTechnical specifications•Switch on, regulation and switch off through built-in push but-

ton or non-luminous NC push buttons.•Lighting level is savedwhen switched off (unless there is a

blackout).•Softstart:ensuresagraduallightingfromzerotomaximumor

preset lighting levels.•Softend:ensuresagradualpassagefromlighttodark.•Protectionagainstshort-circuitwhenswitchonandoverriding

with blow-out indication •MASTER-SLAVE function:so long as the maximum permis-sibleloadofeachdimmerisnotexceeded,asingleMASTERdimmer can be combined with up to 4 SLAVE dimmers for a total maximum load of 2500 W (VA) corresponding to 500 W/VA max connected to each of the 5 dimmers.

•SLAVEdimmerhastobeconnectedtoaMASTERdimmertooperate.

Controllable loads•halogen and incandescent lamps: 40-500 W 230 V~ 50 Hz.•ferromagnetic transformers for low-voltage halogen lamps:

40-500 VA 230 V~ 50 Hz.•electronictransformersVIMAR01860.60max4,or01860.105

max 3

Conformity to StandardsLV DirectiveEMC DirectiveEN 60669-2-1 Standard

14162 DimmerTechnical specifications•Switch on, regulation and switch off through built-in push but-

ton or non-luminous NC push buttons.•Lighting level is savedwhen switched off (unless there is a

blackout).•Softstart:ensuresagraduallightingfromzerotomaximumor

preset lighting levels.•Softend:ensuresagradualpassagefromlighttodark.•Protectionagainstshort-circuitwhenswitchonandoverriding

with blow-out indication.

Controllable loads•electronictransformersVIMAR01860.60max 5 or 01860.105

max 3 or capacitive response electronic transformers : 40-300 VA 230 V~ 50 Hz (max 5 transformers).

Operating•thedeviceisswitchedonandoffbylightlyplacingafingeron

the front and then taking it off.•Itisregulatedbykeepingyourfingeronthefrontofthedevice,

to reverse the direction of adjustment, take your finger off and then place it back on again immediately. When maximum or minimum load is reached, regulation stops and can be inver-ted by taking your finger off and placing it back on again.

14416 14160

P

LN

S

LN

14416 14160Master

14416 14161Slave For a correct

operating the distance betweenMASTERand SLAVE dimmers or NO push buttons should not exceed 100 m.

Conformity to StandardsLV DirectiveEMC DirectiveEN 60669-2-1 Standard

C

LN

14416 14162

14160 - Control and regulation from several points with NO push buttons

14161 - Control and regulation with SLAVE dimmer

14162 - Control and regulation from several points with NO push buttons

Page 2: PLANA-14160

249∆ Available until stock lasts* Only for Countries not members of the EU

PL

AN

A

Side views show the overall dimensions and the flush depth in mm

Mounting boxes, mounting frames and cover plates, page 323

Dimmer14160 .SL Dimmer, supply voltage 230 V~ 50 Hz for 40-500 W incandescent lamps, 40-500 VA ferromagnetic transformers and 40-300 VA L inductive response electronic transformers, control and regulation with built-in push button or from peripheralNOpushbuttons,MASTERfunction,MOSFET+TRIACtechnology,visibleindarkness. Not suitable for installation in Isoset IP44 and IP55 enclosures

14161 .SL SLAVE dimmer, supply voltage 230 V~ 50 Hz for 40-500 W incandescent lamps, 40-500 VA ferromagnetic transformers and 40-300 VA L inductiveresponseelectronictransformers,controlfrom20160dimmer,MOSFET+TRIACtechnology, visible in darkness. Not suitable for installation in Isoset IP44 and IP55 enclosures

49

22,340,5

54,8

49

22,340,5

51

49

22,340,5

54,8

NOTE•Theconnectionshouldbemadewithfusecarrierwithquick-

acting fuse with high breaking capacity type F2,5AH 250 V~ (07050.HF.2.5) as shown in the diagrams.

•Installation of 2 dimmers in the same mounting box, the loads controlled by each dimmer must be reduced so that their total does not exceed the indicated values.

Dimmers

Dimmer14162 .SL Dimmer, supply voltage 230 V~ 50 Hz for 40-300 VA C capacitive response electronic transformers, control and regulation with built-in push button or from peripheral NO push buttons, MOSFET technology, visible in darkness. Not suitable for installation in Isoset IP44 and IP55 enclosures

Controllable loads

Charact. controllable transformer

14160MASTER

14161SLAVE 14162

– 40 - 500 W 40 - 500 W –

– 40 - 500 VA 40 - 500 VA –

L 40 - 300 VA 40 - 300 VA –

C – – 40 - 300 VA

14160.SLSilver

14161.SLSilver

14162.SLSilver

14160white

14161white

14162white