Pneumatic Connector, Tubing, and Accessory Catalog

Pneumatic Quick Connectors

Plastic Tubing and Adaptors

Plumbing Tools

Tube Connectors and Manifolds

Instrumentation Devices Srl Via Acquanera 29 - 22100 COMO (Italy) ph +39 031 525 391- fax +39 031 507 984 info@instrumentation.it - www.instrumentation.it

Questi prodotti sono distribuiti e supportati in Italia da:

ContentsPlastic Tubing 1

Tubing Clamps and Sealant 3

Tubulations and Specialized Tubing Tools 4

Specialized Tubing Tools 5

Tube/Pipe Connectors 6

Tube Connectors 7

Pneumatic Connectors (100 PSI) 8

Pneumatic Connectors- Model D (300 PSI) 11

Rectangular Pattern Connectors(150-500 PSI)* 14

Pneumatic Manifolds (500PSI) 15

Quick Couplers 16

Pneumatic Calibration/Purge Valve 17

1

Plastic TubingScanivalve stocks clear plastic tubing for many applications including:

Wind Tunnel Tests

Flight Tests

Gas Turbine and Diesel Tests

R&D and Laboratory Use

Industrial Test

Available stock materials are urethane, nylon, vinyl and

Nylon Tubing

Tubing Material Sizes Typically Stocked

For use on: Vinyl Nylon 6/6 (Clear) Urethane

†

†

Vinyl Tubing - Clear

snugly over our stainless steel tubulations, and can be

Urethane Tubing - Clear

† Indicates special order

Part N

umber

I.D.

Inches (m

m)

O.D

. Inches (m

m)

Recom

mended

Working

PSI (kPa)

Burst

Pressure

PSI (kPa)

Burst

Pressure

PSI (kPa)

Max

Operating

Temperature

Min

Operating

Temperature

Burst Pressure

at Max O

perating Tem

perature PSI (kPa)

Minim

um

Bending

Radius

Inches(mm

)

NYLN

-063

NYLN

-

TFLN-040

TFLN-063

UR

TH-031

UR

TH-040

UR

TH-063

VINL-040

VINL-063

3

Tubing Clamps and SealantHelical Tubing ClampsThese tubing clamps are used to clamp plastic tubing onto the stainless steel tubulations which extend from our Scanivavle modules and line of connectors,

Scanivalve nominal stainless steel tubulation outside

To Order, Specify Brass Stainless Steel

S t a i n l e s s S t e e l Tubulation Size:

Scanivalve Tubing:

For use on Vinyl or Urethane tubing, #:

Scanivalve Tubing: For use on nylon

Pipe Sealant The use of sealant with the helical tubing clamps is

the sealant lightly over the bulge of the stainless steel tubulation, then drive the tubing and clamp onto the

4

Bulged Stainless Steel TubulationsScanivalve manufactures a complete line of bulged stainless

Tubing Push-on Tool

on Scanivalve nominal stainless steel tubulation outside

Tubulations and Specialized Tubing Tools

PUSH

TPOTL-XXX

To order, specify:Scanivalve #: Standard Lengths (Inches) Tubulation Size

To order, specify Scanivalve#

5

NYCLMP Screw-Back Tool

Specialized Tubing Tools

To order, specify Scanivalve#

Note:

6

Tube/Pipe ConnectorsPipe ConnectorsThese connectors are useful to connect small diameter

To order, specify: Item: Scanivalve#:

Tube Adaptors for X-Lok Compression Fittings - 1500 psi

1/4 Inch (6mm) X-Lok reduced to:

1/8 Inch (3mm) X-Lok reduced to:

material is brass or stainless steel with brass or stainless

MPT Shown

FPT Shown

7

To order, specify: Item: Scanivalve #: Type: Design:

Tube Tubulation Design

Tube Connectors

connectors are optionally available with a brass body with soldered stainless steel tubing when an extra safety

Available Colors:

Sizes Available:

8

Pneumatic Connectors (100 PSI)Quick Disconnect

These connectors have the highest channel density per

gasket is shipped with the male connector for providing

Dimensions: Inches (mm) Number of Tubulations Connector Diameter A B Tubulation Dimensions

To order, specify: Number of Tubulations Male Connector # Female Connector # Spare Gasket # Male Cap # Female Cap #

MaleFemale

Description

64CFB-1 64CM-1

10

ScanCo# Description No. of Tubulations

Tubulation Size A B C D F G Cap

Female

Female

Spare

48C Pneumatic Connectors(500psi)ScanCo# Description No. of

TubulationsTubulation

Size A B C D F G Cap

Female

Female

Spare GasketOptionalGaskage

64C Pneumatic Connectors(100psi)*ScanCo# Description No. of

TubulationsTubulation

Size A B C D F G Cap

Female

Female

Spare GasketOptionalGaskage

11

Pneumatic Connectors- Model D (300 PSI)

model test break points when both male and female

mated together to act as a reducer, please consult the

To Order, Specify:

0.16” (4.06mm)

together to act as a reducer, please consult the factory for

Note: Tubing supplied bycustomer must have smooth

Pneumatic Connectors- ZOC (500 PSI)

High Pressure Model L Connector (1500 PSI)

To Order, Specify:

73 ZOC M 063

48LM

48LFB Female

13

The materials of construction for these connectors are

Available Colors:

at the time of order, Scanivalve will supply a color based

Tubulation Sizes Available:

Number of Tubes Connector Length L in Inches(mm)

For Tube Diameters:

Dimensions in Inches (mm)Tube Diameter Thickness A B (Hole Diameter) C D

Screw

Screw

To Order, specify:

14

Rectangular Pattern Connectors(150-500 PSI)*

This rectangular pattern connector is

The sectioned side view of the drawing shows the front half of the connector

are incorporated on the threaded half

Dimension Inches (mm) - Standard Connector Size

To order, specify Scanivalve #:

pattern tubulationconnector diameter

of tubes tubulation diameter

of tubes

15

Pneumatic Manifolds (500PSI)M - Single Manifold

The pneumatic manifolds are available in two designs, Materials:

Available Colors:

To order, specify Scanivalve #:Single Manifolds Double Manifolds

16

Quick CouplersQuick Coupler (Patented)

testing where there is a need for changing pressure

Use:

mechanically held by the collet which is initially closed

internal piston applies additional closing force to the

Quick Coupler Designs

QC-XXX-TH

QC-XXX-TUBN-XXX

TUBN-XXX-X

CAUTION:

Ordering InformationTo order, specify Scanivalve #: .063 O.D. Tubulation Size

QC063-TH8

QC063-TUBN063

Connected

Disconnected

17

Pneumatic Calibration/Purge Valve

switch the valve from the default measurement mode to

In calibration mode, input pressures are isolated allowing

purge condensation or contamination back through the

Dimensions in Inches (mm)

18

©

Scanivalve Headquarters

and Temperature Instruments.

Intelligent LiquidPressure Measurement

Intelligent GasPressure Measurement

Servo PressureCalibrator

Intelligent ThermocoupleRemote A/D

Intelligent Rack MountedPressure Measurement

Miniature IntelligentPressure Measurement

Flight/Wind Tunnel/Auto Pressure Test Miniature Pressure Scanners

Contact Information:

Instrumentation Devices Srl Via Acquanera 29 - 22100 COMO (Italy) ph +39 031 525 391- fax +39 031 507 984 info@instrumentation.it - www.instrumentation.it

Questi prodotti sono distribuiti e supportati in Italia da: