poe pro...guesswork tone generator ability to identify and trace cables with a compatible inductive...
TRANSCRIPT
Proof of Performance
Eliminate guesswork from PoE installations
PoE ProData Cable and Power over Ethernet Verifier
Do you have enough power at the device location? PoE Pro displays the maximum power available at the
device location including the maximum watts, Class (0-8),
Voltage, Type (af/at/bt) and 2/4 pair operation.
Some switches or injectors may provide power that
exceeds their IEEE Class rating. The PoE Pro can test
this ability with its extended power test. Simply press
the network button for 3 seconds and the PoE PRO will
increase power demand up to a maximum of 90 watts.
What type of Power Sourcing Equipment is in use?Reduce troubleshooting time by identifying the type of
PoE equipment in use. End-point PoE switches are in the
equipment room vs mid-span injectors can be anywhere
along the cable.
This is achieved by displaying which twisted pairs have
power. Power on pairs 1/2, 3/6 indicates a PoE switch and
power on pairs 4/5, 7/8 indicates a mid-span injector
Does the PoE switch provide enough power?Test and verify PoE switches and injectors by connecting
directly to them and displaying the maximum power,
Type (af/at/bt), Class (0-8) and Voltage.
The new PoE Pro eliminates guesswork when installing, maintaining and troubleshooting networks where PoE is deployed.
Previously technicians had to understand all the various standards, device power outputs and cable lengths to be sure a device will operate successfully.
The PoE Pro identifies the Class of the PoE source and power available to a PoE device regardless of cable length, cable quality or other factors. Provides a clear pass/fail result to IEEE 802.3af/at/bt standards.
PoE Verification and Troubleshooting
Data Cable and Power over Ethernet Verifier
Eliminate guesswork from PoE installations
PoE Pro
Mid-span injector
SwitchPoE Switch/PSE
Patch Cable
WiFi Access Point IP PhoneIP Camera TV Monitor
www.idealnetworks.net
Cable Verification and Troubleshooting
Accurate fault finding that saves time and moneyThe PoE Pro utilises Time Domain Reflectometry (TDR) to
accurately measure cable length and provide distance to fault
information. This speeds up fault finding as well as minimising
disruption and potential damage to fixtures and fixings.
Instant resultsWith comprehensive details on faults such as opens,
shorts, crossovers and split pairs, PoE Pro identifies wiring
errors instantly.
No need for separate testersThe integrated RJ11/RJ12 (voice), RJ45 (data) and
F-Type (video) connectors allow faster testing of most
types of low-voltage cables by eliminating the need for
separate testers.
Validate voice and data services fasterPoE Pro quickly determines which media service is running
over the cable, such as Ethernet, ISDN, PBX and PoE resulting
in faster fault diagnosis.
Quickly determine network speedTroubleshooting active Ethernet networks is also made
easier with in-built network detection that displays the speed
(10/100/1000) and duplex (Half/Full) status of a network
port.
Voltage protection for your testerThe PoE Pro will detect high voltages and provide a visible
and audible warning to prevent damage to the tester.
Cable tracing to save timeThe analogue / digital tone generator with multiple tones can
be used with most analogue and digital cable tracing probes
which is essential for finding faulty or mis-labelled cabling.
Port identification The port blink function will identify the switch port to which
a cable is connected.
Coax testing
Wiremap with length
Service detection
Proof of Performance
Troubleshooting PoE ExampleMalfunctioning Device
Installed Cabling
Installed Cabling
Verify Installation
PoE Switch
Result Available power = 50W Ethernet 1000 Mb/s
Fault DetectedPower available to device at installed location does not meet device requirements.
Next step: Determine whether the PoE Switch or cable is at fault.
Digital DisplayRequires 75 watts
PoE Switch
www.idealnetworks.net
Multimedia SupportRJ-45, RJ-11/RJ-12 and coax
ports for verification of low
voltage copper cables
Voltage ProtectionCable testing disabled if
>2V detected
TDR Length Testing and
TroubleshootingPinpoints cable faults
eliminating unnecessary
guesswork
Tone GeneratorAbility to identify and trace
cables with a compatible
inductive tone probe
(optional)
PoE DetectionIdentify the IEEE standard,
Class, Type, max Power (W)
and Voltage (V) available
Storage and Protection of Remote Unit
Reduces the chance of losing
or damaging the remote unit.
Additional numbered
remotes available
Large Backlit Screen
Instantaneous, easy to read
test results
Media Service Detection
Identifies analog (PBX)
and digital (ISDN)
telephone services
Ethernet DetectionDisplays network rate and
duplex information
The PoE Pro includes all the features of the VDV II Pro plus the advanced PoE features.
VDVII Pro Cable Verification• Supports RJ45, RJ11/12 and Coax
connections• Wiremap for miswires, split pairs,
shorts and opens• Shielded cable testing• Cable length• Distance to Open / Short (TDR)
Cable Tracing• Analog and digital tone generator• Compatible with common cable tracing
probes
Active Network Testing• Port Blink• Media Service Detection – Ethernet,
analogue / digital telephone serviceand ISDN
• Ethernet Speed Detection10/100/1000 Mb/s
Other Features• Instantaneous results – results are
shown as soon as you plug in the cable• Larger 2.9” display• Backlight• Over-voltage protection
PoE Pro All VDV II Pro features plus the following
PoE Testing:• Validate PoE to ensure your device &
network performs successfully• Supports 802.3bt High Power PoE
(up to 90 watts)• Compatible with most non-standard
PoE injectors• Identifies PSE Type (af/at/bt)• Identifies PSE Class – 0 to 8• Determines maximum power available
(watts) at the device location• Displays voltage• Displays how many pairs have PoE
Proof of Performance
Extended Power Test
Some switches / injectors may
provide power exceeding its
IEEE Class rating. Hold button
for 3 seconds to measure
maximum available power
up to 90 watts
Eliminate guesswork from PoE installations
Data cable and Power over Ethernet Verifier
Eliminate guesswork from PoE installations
PoE Pro
IDEAL INDUSTRIES Networks Limited Stokenchurch House, Oxford Road, Stokenchurch, High Wycombe, Buckinghamshire, HP14 3SX, United Kingdom
Tel. +44 (0)1925 428 380 | Fax. +44 (0)1925 428 381
[email protected] Specification subject to change without notice. E&OE
© IDEAL Networks 2019
Publication no.:158825, Rev.1www.idealnetworks.netAll Rights Reserved. IDEAL, IDEAL NETWORKS and the PoE PRO logos are trademarks or registered trademarks of IDEAL INDUSTRIES Networks Limited.
Ordering Information
PoE Pro
Part No. Kit Contents
R158004
PoE Pro – Data Cable and Power over Ethernet Verifier. Includes 1 x tester, 1 x dual port remote unit, 1 x coax remote unit, 1 x alkaline battery, 1 x multi-language user guide, 2 x RJ45 to alligator clip cable 390mm, 2 x screened RJ45 to RJ45 cable 150mm, 2 x RJ12 to RJ12 cable 100mm, 1 x F-type plug to F-type plug cable 230mm, 1 x F-81 barrel splice, 1 x BNC female to F-type male adaptor, 1 x BNC female to F-type female adaptor, 1 x RCA female to F-type male adaptor, 1 x RCA female to F-type female adaptor, 1 x wallet wiring card, 1 x carry case.
Optional Accessories
Part No. Kit Contents
158050Kit of 12 x RJ-45 remote units* (#1 - #12)
158051Kit of 24 x RJ-45 identifiers** (#1 - #24)
158053Kit of 12 x coax remote units* (#1 - #12)
62-164Amplifier Probe
* Separate numbered remotes allow multiple cables to be tested more quickly
** Multiple identifiers simplify cable labelling at the patch panel
For detailed specifications, please visit our website.
Description VDV II Plus VDV II Pro
Dimensions 160 mm x 76 mm x 36 mm
Weight 0.26 kg
Length Range 0.3 – 600m / 1 – 1969ft
Battery Type9V Alkaline. 2. Typically 20 hours
minimum continuous use (backlight off)
Basic Specifications