point-to-point setup zixi ip transport ©2018 r.l. drake holdings, llc 937-746-4556 point-to-point...
TRANSCRIPT
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Point-to-Point Setup
ZIXI IP Transport Reliable Open Internet Based Solution
1 CONFIDENTIAL
3-14-2018 v4
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Point-to-Point Application HD/SD H.264
Zixi-Link over Public Internet
Encode Decode
Input HD/SD-SDI or
Composite
Output HDMI, Component, Composite
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Point-to-Point Application Setup Overview
Internet
Encoder
Decoder
Input HD/SD-SDI or
Composite
Router or Cable Modem
Router or Cable Modem
IP Address DHCP or Static
Data IP Address Example: 192.168.1.9
Set Port Forwarding in Switch/Router or Cable Modem to Decoder IP Address
192.168.1.9 Use UDP port 2088
Bi-directional
Public IP address of Router or Cable Modem Example Public IP Address: 47.203.116.40
Enter this IP address in the Encoder
Default Remote Control
IP Address: 172.16.80.1
Please note: You can also use
the Data IP Address for management of
the Decoder
TV
HDMI
Output HD/SD-SDI or
Composite
IP Address DHCP or Static
Default Remote Control
IP Address: 172.16.70.1
SFP IP Address Example: 192.168.1.155
Router Status: Connected Connection Type DHCP IP Address 47.203.116.40
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Point-to-Point Application Encoder
Output IP UDP or ZIXI
Input HD / SD SDI or Composite
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
PEG Encoder Login � Log into PEG Encoder
� Default Control IP address: http://172.16.70.1/ � Log in “admin’ and password “pass”
5
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
PEG Encoder Tab Under the Encoder Tab
� Change Host Address to the Public IP address of the Router or Cable Modem Example: 47.203.116.40 � Confirm Port: 2088, Channel, and Password match Decoder settings
6
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
PEG Encoder Management � To use the SFP Port IP address for management
� Change HTTP Server Enable parameter to “Enable”
7
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
PEG Status Tab � Under the Status Tab
� Confirm Zixi Stream Status
8
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Point-to-Point Application Decoder
Output HDMI, Component, or Composite
Input IP or 8VSB/Clear QAM
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Setup ND-24-IP Decoder
• Confirm control (management) port IP address from front panel • From front panel: Network Settings, Select “ENTER”
• Display will show: >Control (eth1) and Data (eth0) • Select “ENTER” Display will show: > Display IP and
Display MAC
• Select “Enter” Display will show IP: IP address (eth1) xxx.xxx.xxx.xxx (default IP Address: 172.16.80.1)
• Configure laptop IP address on the same network as decoder control (eth1) address
• Log into ND-24-IP control (management) port using laptop
10
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP Decoder Data Port Set DHCP
• Set data (input) port to DHCP • From the front panel: Network Settings: Select “Enter” • Display will show: Control (eth1) and Data (eth) • Select “down arrow button” • Display will show: >Data (eth0) • Select “Enter” Display will show: Edit Cfg (eth0) • Select “Enter” Display will show: Enable DHCP • Select “Enter: Display will show Enable DHCP [YES] / NO • Select “Enter” to enable DHCP • From the front panel: Network Settings: Select “Enter” • Display will show: Control (eth1) and Data (eth0) • Select “down arrow button” to Display Data (eth0) • Select “down arrow button” to Display IP • Select “Enter” to Display IP Address (eth0) xxx.xxx.xxx.xxx
11
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP Decoder Data Port Set Static
• Set data (input) port to Static IP • From the front panel: Network Settings: Select “Enter” • Display will show: Control (eth1) and Data (eth) • Display will show: >Data (eth0) • Select “Enter” Display will show: Edit Cfg (eth0) • Select “Enter” Display will show: Enable DHCP and Edit
Address • Select “down arrow button, ‘ Edit Address • Enter IP address using the arrow buttons • Select “down arrow button, ‘ Edit Netmask change
address using arrow buttons • Select “Enter: and “down arrow button’ to Edit Gateway • Enter IP address using the arrow buttons and Select
“Enter: • Select the Left Arrow button 3 times to go back to
Network Settings
12
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Router or Cable Modem Port Forwarding
13
• Create Port forward rule IP xxx.xxx.xxx.xxx (example 192.168.1.9)
• Select Custom Ports and enter port 2088 (Bi-directional)
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP Control Panel Tab
14
• Under Control Panel Tab, Set Source Type to “Zixi Push” • Set Zixi port number: “2088” • Set Channel/Stream ID “1” • Set Password, For example: ”hockey” • Set Program Selection: “Auto”
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP System Tab
15
• Under System Tab, Confirm Add-on Feature to say “zixi”
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP A/V Settings
16
• Under Video Format Select: 1080i:59.94
• Under Enable SD-SDI Select: Enable
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
ND-24-IP Output connection
17
• Connect Cables to view video
Composite video
HDMI
And/Or
www.rldrake.com ©2018 R.L. Drake Holdings, LLC.
937-746-4556
Technical Support
For products and service information please visit www.rldrake.com
18
R.L. Drake Holdings, LLC Phone: 937-746-6990 [email protected]