polyester plinths of thalassa polyester wall-mounting and floor-standing enclosures
DESCRIPTION
Polyester plinths of THALASSA polyester wall-mounting and floor-standing enclosures. UE_TR_UE11MK15en. Contents. Installation of an enclosure Why use a plinth? Advantages Plinth offer. Installation of an enclosure. Enclosures can be installed. On a post. Against a wall. - PowerPoint PPT PresentationTRANSCRIPT
Polyester plinths of THALASSA polyester wall-mounting and floor-standing enclosures
UE_TR_UE11MK15en
Schneider Electric 2- Power UE - June 2011
Contents
1. Installation of an enclosure2. Why use a plinth?
3. Advantages
4. Plinth offer
Schneider Electric 3- Power UE - June 2011
Installation of an enclosure
• Against a wall • On a post
• Flush• On a structure
Enclosures can be installed
Schneider Electric 4- Power UE - June 2011
● With the bottom of the enclosure against the floor or a plinth.
This represents the vast majority of installations, especially outdoors
Installation of an enclosure
Schneider Electric 5- Power UE - June 2011
Installation of an enclosure
On a plinth between the floor (or the foundation) and the enclosure
Directly at floor level On the foundation
Partly embedded, opening plinth
Partly embedded, non-openingplinth
Finished floor or floor with concrete foundation
Finished floor Unfinished floor
Schneider Electric 6- Power UE - June 2011
Contents
1. Installation of an enclosure
2. Why use a plinth? 3. Advantages
4. Plinth offer
Schneider Electric 7- Power UE - June 2011
Why use a plinth?
●Plinths can be used to:● Avoid the hazard posed by water rising
● Improve working height
● House stand by cables
● Avoid having to build a concrete foundation (plinth)
●Opening plinths can be used to:● Make it easier to install cables, with front or rear access
● Ensure the cables are supported
● Provide access for maintenance (adding/replacing cables)
Schneider Electric 8- Power UE - June 2011
Contents
1. Installation of an enclosure
2. Why use a plinth?
3.Advantages4. Plinth offer
Schneider Electric 9- Power UE - June 2011
What would you think of a plinth that offers the following advantages?
Advantages
•Choice of height or stackable plinth•No concrete foundation (plinth) needed•Installation on unfinished floors using an accessory •Easy assembly—symmetry to avoid mistakes•Compatible with horizontal coupling of enclosures
Easy installation•No electric risk = total insulation / Class II equivalent •Choice of IP•High mechanical strength•Attractive lock and hidden screw•Lock requiring a special tool—cannot be opened through primary vandalism—or no external lock
Security and protection
Assistance for installing and supporting cables
•Cable-supporting accessory•Different positions for the cable-supporting accessory •Option of installing several cross-rails for supporting cables
Maintenance access
•Plinth opens from the front and back—more access options
Schneider Electric 10- Power UE - June 2011
Contents
1. Installation of an enclosure
2. Why use a plinth?
3. Advantages
4.Plinth offer
Schneider Electric 11- Power UE - June 2011
ZM plinth offerfor Thalassa PLM ranges
Thalassa PLM
dimensions
310 x 215 x 160307 x 255 x 164430 x 330 x 200530 x 430 x 200647 x 436 x 250747 x 536 x 300847 x 636 x 300
1056 x 852 x 350
Schneider Electric 12- Power UE - June 2011
ZA & ZZ plinth offer for Thalassa PLA ranges
PLA / PLAT PLAZ / PLAZT
Schneider Electric 13- Power UE - June 2011
● Same material as the enclosures: polyester reinforced with fibreglass
● IP 44 (and an accessory for increasing to IP 54) (degree of protection)
● IK 10 (protection against impacts)
● Choice of height (function to support - raise)
● ZM and ZA => 200 mm and option of stacking 2 => 400 mm
ZM
PLM
ZA
PLA or PLAT
ZA
Plinth offer
Schneider Electric 14- Power UE - June 2011
● ZZ: two plinth heights ● 200 or 500 mm
ZZ2
ZZ5
PLAZ or PLAZT
Plinth offer
Schneider Electric 15- Power UE - June 2011
Plinth offer / ZM, ZA and ZZ (components and accessories)Lateral (support function)Identical opening front and rear - (access function)
Transverse reinforcement (function of withstanding pressure)
ZM and ZA: locking by special tool (Allen key) (locking function and limited access from the outside) and protective cap
ZZ: no external opening as standard (total security function)Optional lock installation (opening from the outside)
Schneider Electric 16- Power UE - June 2011
Plinth offer / Components and accessories
Internal points for holding cable-supporting cross-rails (choice of position)
Packaging—unassembled supply (purpose: to minimise bulk during storage and transport)
Cross-rail accessory (cable-supporting function)
Schneider Electric 17- Power UE - June 2011
Finished floor height
In all versions of the 200-mm plinths, four sealed feet can be fixed to the bottom of the excavationThe front panel does not open and the height above the floor is low (100 mm embedded, 100 mm above floor)
With two stacked ZM or ZA plinths or one 500-mm ZZ plinth, four sealed feet can be fixed to the bottom of the excavation The bottom front panel is partly embedded; the top front panel can be opened
Plinth offer / Components and accessories
Finished floor height
Accessories with four adjustable feet for partly embedded plinths (function: fixing into the ground)