polyethylene without video
TRANSCRIPT
-
8/10/2019 PolyEthylene Without Video
1/12
POLYETHYLENE
VIDITGHAI
2014JDS6018
-
8/10/2019 PolyEthylene Without Video
2/12
A thermoplastic (can be melted down and re-used)
POLYMERIZATION
STRUCTURE
-
8/10/2019 PolyEthylene Without Video
3/12
Polyethylene is classified into several different categories based
mostly on its weightand branching.
These both determine its Championproperties.
Few Important Types Include:
UHMWPE(ultra high molecular weight PE)
HDPE(high density PE)
LDPE(low density PE)
CLASSIFICATION
Manufacturing Types:
Compression molding
Blow Molding
http://en.wikipedia.org/wiki/Ultra_high_molecular_weight_polyethylenehttp://en.wikipedia.org/wiki/High_density_polyethylenehttp://en.wikipedia.org/wiki/Low_density_polyethylenehttp://en.wikipedia.org/wiki/Low_density_polyethylenehttp://en.wikipedia.org/wiki/Low_density_polyethylenehttp://en.wikipedia.org/wiki/High_density_polyethylenehttp://en.wikipedia.org/wiki/High_density_polyethylenehttp://en.wikipedia.org/wiki/Ultra_high_molecular_weight_polyethylenehttp://en.wikipedia.org/wiki/Ultra_high_molecular_weight_polyethylene -
8/10/2019 PolyEthylene Without Video
4/12
UHMWPE: ultra high molecular weight polyethylene
Extremely long Linear chains and Very packed
structure.
CHAMPION PROPERTIES:
Tough material Highest impact strength
BULLETPROOF JACKET
TROLLEY WHEEL
HIP IMPLANT
-
8/10/2019 PolyEthylene Without Video
5/12
HDPE(high density polyethylene)
CHAMPION PROPERTIES:
More Tensile strength (doesnt deform easily). Lower Ductility (breaks easily).
Long Linear chain structure.
BOTTLES
PIPES
-
8/10/2019 PolyEthylene Without Video
6/12
LDPE(low density polyethylene)
Branching (weaker) structure and Molecules
are less tightly packed.
CHAMPION PROPERTIES:
Lower Tensile strength (deforms easily) Higher ductility (doesnt break easily)
-
8/10/2019 PolyEthylene Without Video
7/12
OTHER PRODUCTS
Designer
Furniture
Packaging
Foam
Joining and
Repair
http://localhost/var/www/apps/conversion/tmp/scratch_8/My%20Movie4.mp4http://localhost/var/www/apps/conversion/tmp/scratch_8/My%20Movie4.mp4http://localhost/var/www/apps/conversion/tmp/scratch_8/My%20Movie4.mp4 -
8/10/2019 PolyEthylene Without Video
8/12
-
8/10/2019 PolyEthylene Without Video
9/12
RECYCLED Products
-
8/10/2019 PolyEthylene Without Video
10/12
Polyethylene film (Low Density Polyethylene) with a thickness
of 0.024-0.04mm, normally sold at general market retailers as a
"plastic bag."Low-density polyethylene softens when it is heated at 70 to 90 degrees
Celsius.
Taking advantage of this, different types of soldering irons and press is
used to process the whole sequence from creating fabric to molding
parts, joining, and finishing the details.
Layering the polyethylene films, they are heated and pressured slowly with a
soldering iron. By repeating this process over again, the width and strength are
increased and a fabric is created with natural shrinkage, wrinkles, uneven
surfaces, and tactile texture.
A soldering iron is used to weld things by hand, from
the assembling process to joining
1
2
3
4
FINAL PRODUCTS
Do It Yourself!
-
8/10/2019 PolyEthylene Without Video
11/12
1. Sugarcane is crushed , fermented and
distilled into ethanol,
2. Then
transformed into
polyethylene
pellets.
3. Extruded into yarn
4. Woven into Fabric.
FUTURE!
GREEN POLYETHYLENE1
2
3
4
http://localhost/var/www/apps/conversion/tmp/scratch_8/My%20Movie.mp4 -
8/10/2019 PolyEthylene Without Video
12/12
THANK YOU!