potable aqua pure · 2020-03-13 · 4 potable aqua ™ pure instruction manual pa pure™...
TRANSCRIPT
Potable Aqua
PURE™
E L E C T R O LY T I C W AT E R P U R I F I E R
Instruction Manual
PA PURE™ ELECTROLYTIC WATER PURIFIER
CONTENTSINSTRUCTION MANUAL
PA PURE™ DEVICE OVERVIEW
Potable Aqua™ PURE INSTRUCTION MANUAL 1
PA PURE™ At A Glance PA PURE™ Device Overview .................................................................. 1 What Comes with the PA PURE™ Device ............................................. 2 Getting to Know the PA PURE™ Device................................................ 3 Device Panel Icons ................................................................................. 4
Important Safety Information Warnings & Precautionary Statements .................................................. 5 First Aid Instructions............................................................................... 5
Operating Instructions Step 1: Making Brine Solution ............................................................... 6 Step 2: Adding Brine Solution to Device ................................................ 6 Step 3: Selecting Treatment Volume ...................................................... 7 Step 4: Making Disinfectant ................................................................... 7 Step 5: Dosing Water with Disinfectant ................................................ 8 Step 6: Determining Next Steps............................................................. 8 Step 7: Disinfecting Container Lid ......................................................... 8 Step 8: Wait Before Drinking .................................................................. 8 10-Minute Chlorine Check ..................................................................... 9
Caring for PA PURE™
Important Use, Care & Storage Tips ...............................................10-11
Troubleshooting Problems & Solutions ........................................................................... 12 Frequently Asked Questions ...........................................................13-17
Technical Specifications Product Specifications ......................................................................... 17 Product Support USA Product Limited Warranty /Exclusions....................................18-21 Patent Protected H2gO® Technology ................................................... 21 Contact Us ........................................................................................... 21
The Potable Aqua™ PURE Electrolytic Water Purifier is a miniature electrolytic generator that uses patented technology to convert common salt, a few drops of water, and power from a rechargeable battery into a powerful mixed oxidant disinfectant capable of purifying even the dirtiest water. PA PURE™ is pro-grammed to treat water volumes ranging from 1 liter (1 quart) up to 20 liters (5+ gallons). When treating larger volumes of water, the disinfectant made will be more concentrated, requiring a slightly longer reaction time in the device (about 20 seconds for 1 liter up to a maximum of 6½ minutes for 20 liters).
The mixed oxidant disinfectant generated by PA PURE™ is capable of inactivating even the most difficult to kill microbiological contaminants. The wait time required before drinking treated water depends on the microorganism of concern: bacteria, viruses and Giardia, require a 30-minute wait before drinking, while Cryptosporid-ium needs 4-hours to safely inactivate. These times are based on testing in the worst possible water, “EPA Type II challenge water”, that carries a high organic load, has a high pH and low temperature, and is highly turbid (visibly very cloudy or dirty) – presenting the most difficult conditions for disinfectants.
The PA PURE™ Electrolytic Water Purifier can be recharged more than 500 times via the on-board micro USB port. Each full battery charge will generate enough disinfectant to treat about 150 liters* (40 gallons) of water. The device also incorporates a small on-board solar panel that can add enough energy to the battery in one hour to treat 2 liters* (½ gallon) of water.
With a PA PURE™ Electrolytic Water Purifier, all you need to make your water safe to drink is common salt and sunlight. PA PURE™ is the smallest and most cost effective water purification device available – Pure & Simple.
For a fast & simple video demonstration of how to operate your PA PURE™ device, use your smart phone to scan the QR Code below or go to www.potableaqua.com
*Volumes are based on a standard single dose in align-ment with the EPA Guide Standard & Protocol for Testing Microbiological Water Purifiers. Treating for protozoan cysts may require dosing in excess of the standard, and may reduce the total volume of water that can be treated on one battery charge.
PA PURE™ ELECTROLYTIC WATER PURIFIER
CONTENTSINSTRUCTION MANUAL
PA PURE™ DEVICE OVERVIEW
Potable Aqua™ PURE INSTRUCTION MANUAL 1
PA PURE™ At A Glance PA PURE™ Device Overview .................................................................. 1 What Comes with the PA PURE™ Device ............................................. 2 Getting to Know the PA PURE™ Device................................................ 3 Device Panel Icons ................................................................................. 4
Important Safety Information Warnings & Precautionary Statements .................................................. 5 First Aid Instructions............................................................................... 5
Operating Instructions Step 1: Making Brine Solution ............................................................... 6 Step 2: Adding Brine Solution to Device ................................................ 6 Step 3: Selecting Treatment Volume ...................................................... 7 Step 4: Making Disinfectant ................................................................... 7 Step 5: Dosing Water with Disinfectant ................................................ 8 Step 6: Determining Next Steps............................................................. 8 Step 7: Disinfecting Container Lid ......................................................... 8 Step 8: Wait Before Drinking .................................................................. 8 10-Minute Chlorine Check ..................................................................... 9
Caring for PA PURE™
Important Use, Care & Storage Tips ...............................................10-11
Troubleshooting Problems & Solutions ........................................................................... 12 Frequently Asked Questions ...........................................................13-17
Technical Specifications Product Specifications ......................................................................... 17 Product Support USA Product Limited Warranty /Exclusions....................................18-21 Patent Protected H2gO® Technology ................................................... 21 Contact Us ........................................................................................... 21
The Potable Aqua™ PURE Electrolytic Water Purifier is a miniature electrolytic generator that uses patented technology to convert common salt, a few drops of water, and power from a rechargeable battery into a powerful mixed oxidant disinfectant capable of purifying even the dirtiest water. PA PURE™ is pro-grammed to treat water volumes ranging from 1 liter (1 quart) up to 20 liters (5+ gallons). When treating larger volumes of water, the disinfectant made will be more concentrated, requiring a slightly longer reaction time in the device (about 20 seconds for 1 liter up to a maximum of 6½ minutes for 20 liters).
The mixed oxidant disinfectant generated by PA PURE™ is capable of inactivating even the most difficult to kill microbiological contaminants. The wait time required before drinking treated water depends on the microorganism of concern: bacteria, viruses and Giardia, require a 30-minute wait before drinking, while Cryptosporid-ium needs 4-hours to safely inactivate. These times are based on testing in the worst possible water, “EPA Type II challenge water”, that carries a high organic load, has a high pH and low temperature, and is highly turbid (visibly very cloudy or dirty) – presenting the most difficult conditions for disinfectants.
The PA PURE™ Electrolytic Water Purifier can be recharged more than 500 times via the on-board micro USB port. Each full battery charge will generate enough disinfectant to treat about 150 liters* (40 gallons) of water. The device also incorporates a small on-board solar panel that can add enough energy to the battery in one hour to treat 2 liters* (½ gallon) of water.
With a PA PURE™ Electrolytic Water Purifier, all you need to make your water safe to drink is common salt and sunlight. PA PURE™ is the smallest and most cost effective water purification device available – Pure & Simple.
For a fast & simple video demonstration of how to operate your PA PURE™ device, use your smart phone to scan the QR Code below or go to www.potableaqua.com
*Volumes are based on a standard single dose in align-ment with the EPA Guide Standard & Protocol for Testing Microbiological Water Purifiers. Treating for protozoan cysts may require dosing in excess of the standard, and may reduce the total volume of water that can be treated on one battery charge.
The following accessories are included with your Potable Aqua™ PURE device:
Instruction ManualUse to access the most complete information about your PA PURE™ device, including detailed instructions for use, safety and precautionary statements, trouble shooting guide, product specifications, answers to common questions, etc.
Quick Start GuideUse to quickly access safety information and abbreviated instructions for use
USB Power Adapter Use to charge the integrated battery
USB CableUse to connect the PA PURE™ device to the USB power adapter or to your computer
Brine BottleUse to prepare brine (salt+water) solution
25 Test StripsUse to check for chlorine residual
Travel BagUse to store PA PURE™ device and accessories
LanyardLoop through PA PURE’s lanyard opening so that the device may be carried more easily or worn on the wrist if desired
INSTRUCTION MANUAL
GETTING TO KNOW THE PA PURE™ DEVICE
Potable Aqua™ PURE INSTRUCTION MANUAL 32 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
WHAT COMES WITH THE PA PURE™ DEVICE?
FRONT VIEW
TOP VIEW BOTTOM VIEW
BACK VIEW
RUBBER PLUG
LANYARDOPENING
REACTIONCHAMBER
LOW SALT/METAL OBJECT
INDICATOR
CHARGING STATUSINDICATOR
LOW BATTERYINDICATOR
ACTIVATIONBUTTON
FLASHLIGHT POSITION INDICATOR
SALT RESERVOIRSWITH SALT PLUGS
USB PLUG USB PORT FLASHLIGHT
LOT NUMBER
WATERVOLUMESELECTOR
SOLARPANEL
The following accessories are included with your Potable Aqua™ PURE device:
Instruction ManualUse to access the most complete information about your PA PURE™ device, including detailed instructions for use, safety and precautionary statements, trouble shooting guide, product specifications, answers to common questions, etc.
Quick Start GuideUse to quickly access safety information and abbreviated instructions for use
USB Power Adapter Use to charge the integrated battery
USB CableUse to connect the PA PURE™ device to the USB power adapter or to your computer
Brine BottleUse to prepare brine (salt+water) solution
25 Test StripsUse to check for chlorine residual
Travel BagUse to store PA PURE™ device and accessories
LanyardLoop through PA PURE’s lanyard opening so that the device may be carried more easily or worn on the wrist if desired
INSTRUCTION MANUAL
GETTING TO KNOW THE PA PURE™ DEVICE
Potable Aqua™ PURE INSTRUCTION MANUAL 32 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
WHAT COMES WITH THE PA PURE™ DEVICE?
FRONT VIEW
TOP VIEW BOTTOM VIEW
BACK VIEW
RUBBER PLUG
LANYARDOPENING
REACTIONCHAMBER
LOW SALT/METAL OBJECT
INDICATOR
CHARGING STATUSINDICATOR
LOW BATTERYINDICATOR
ACTIVATIONBUTTON
FLASHLIGHT POSITION INDICATOR
SALT RESERVOIRSWITH SALT PLUGS
USB PLUG USB PORT FLASHLIGHT
LOT NUMBER
WATERVOLUMESELECTOR
SOLARPANEL
4 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
DEVICE PANEL ICONSINSTRUCTION MANUAL
WARNINGS & PRECAUTIONARY STATEMENTS
Potable Aqua™ PURE INSTRUCTION MANUAL 5
These icons are used to operate and provide information about your PA PURE™ Electrolytic Water Purifier device.
Read this complete Instruction Manual and all information on the PA PURE™ Quick Start Guide before using this product. Failure to do so can result in serious illness caused by drinking improperly treated water, or injury caused by improper handling of the device or disinfectant. Store the Quick Start Guide with the device in the PA PURE™ Travel Bag and have this Instruction Manual readily accessible when using the device. The Potable Aqua PURE™ device is not intended for use on a continuous basis. For short term or emergency use only.
KEEP OUT OF REACH OF CHILDREN PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
This product makes a disinfectant solution containing oxidizing chemical com-pounds generated electrochemically from salt water (sodium chloride solution). The disinfectant made by this device can irritate your eyes and skin, and bleach clothing. Position the device at least 12 inches away from your face and clothing during use. Do not touch your eyes while using the device. Rinse the device and your hands after each use. Do not ingest the undiluted disinfectant solution. Do not mix disinfectant with ammonia or acids, such as vinegar, or other household chemicals, as this can release hazardous gases. See FIRST AID instructions below. ENVIRONMENTAL HAZARDS The disinfectant made by this device is toxic to fish and other aquatic organisms. PHYSICAL OR CHEMICAL HAZARDS Keep away from combustible, organic, or other readily oxidizable materials. This product contains a battery. Battery may explode or leak if disassembled, short-circuited, overcharged, discharged too low, or disposed of in a fire.
FIRST AIDIF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin thoroughly with water. IF IN EYES: Hold eye open and rinse slow-ly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, and then continue rinsing eyes. Call a Poison Control Center (800-222-1222) or doctor for treatment advice. IF SWALLOWED: Call Poison Control Center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting. Do not give anything to an unconscious person. WHEN CALLING A POISON CONTROL CENTER OR DOCTOR: Have this Quick Start Guide or the Instruction Manual with you. When used as instructed, the disinfectant made by this device contains 0.1%- 2% sodium hypochlorite.
4 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
DEVICE PANEL ICONSINSTRUCTION MANUAL
WARNINGS & PRECAUTIONARY STATEMENTS
Potable Aqua™ PURE INSTRUCTION MANUAL 5
These icons are used to operate and provide information about your PA PURE™ Electrolytic Water Purifier device.
Read this complete Instruction Manual and all information on the PA PURE™ Quick Start Guide before using this product. Failure to do so can result in serious illness caused by drinking improperly treated water, or injury caused by improper handling of the device or disinfectant. Store the Quick Start Guide with the device in the PA PURE™ Travel Bag and have this Instruction Manual readily accessible when using the device. The Potable Aqua PURE™ device is not intended for use on a continuous basis. For short term or emergency use only.
KEEP OUT OF REACH OF CHILDREN PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
This product makes a disinfectant solution containing oxidizing chemical com-pounds generated electrochemically from salt water (sodium chloride solution). The disinfectant made by this device can irritate your eyes and skin, and bleach clothing. Position the device at least 12 inches away from your face and clothing during use. Do not touch your eyes while using the device. Rinse the device and your hands after each use. Do not ingest the undiluted disinfectant solution. Do not mix disinfectant with ammonia or acids, such as vinegar, or other household chemicals, as this can release hazardous gases. See FIRST AID instructions below. ENVIRONMENTAL HAZARDS The disinfectant made by this device is toxic to fish and other aquatic organisms. PHYSICAL OR CHEMICAL HAZARDS Keep away from combustible, organic, or other readily oxidizable materials. This product contains a battery. Battery may explode or leak if disassembled, short-circuited, overcharged, discharged too low, or disposed of in a fire.
FIRST AIDIF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse skin thoroughly with water. IF IN EYES: Hold eye open and rinse slow-ly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, and then continue rinsing eyes. Call a Poison Control Center (800-222-1222) or doctor for treatment advice. IF SWALLOWED: Call Poison Control Center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting. Do not give anything to an unconscious person. WHEN CALLING A POISON CONTROL CENTER OR DOCTOR: Have this Quick Start Guide or the Instruction Manual with you. When used as instructed, the disinfectant made by this device contains 0.1%- 2% sodium hypochlorite.
6 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER INSTRUCTION MANUAL
SELECT AMOUNT OF WATER TO BE TREATED
Potable Aqua™ PURE INSTRUCTION MANUAL 7
For a fast & simple video demonstration of how to operate your PA PURE™ Electrolytic Water Purifier device, use your smart phone to scan this QR Code or go to www.potableaqua.com
SEE HOW IT WORKS!
q MAKE BRINE SOLUTION (SALT+WATER) • Locate the top of the device
• Open one of the two blue plugs labeled “SALT”
• Fill reservoir with salt, DO NOT over fill (figure 1a)
• Empty salt from reservoir into brine bottle (figure1b)
• Fill brine bottle to neck with water (any water may be used, even the water being treated)
• Apply cap and shake until salt is fully dissolved
Also see IMPORTANT USE TIPS (page 10) and FREQUENTLY ASKED QUESTIONS 1-8 (page 13)
wADD BRINE SOLUTION TO DEVICEDO NOT allow blue PA PURE plug to contact brine solution or cover reaction chamber while making disinfectant. DO NOT pick-up or move device while performing Steps w-r. Allow device to remain still, front side up on flat surface with blue plug open.
• Remove blue plug labeled “PA PURE” from reaction chamber• Stretch plug over top of device and secure in open position, DO NOT allow blue plug to contact or cover brine solution (figure 2a)• Lay the device on a flat surface and dispense brine solution (about 50 drops) into reaction chamber, do not over fill (figure 2b)
Also see IMPORTANT USE TIPS (page 10) and FREQUENTLY ASKED QUESTIONS 5-8 (page 13)
WARNING Choose the cleanest water available. Do not treat seawater. The PA PURE™ device does not make drinkable water out of salty or brackish water. Avoid water sources with high levels of chemical contamination such as mine tailing ponds and sources near large agricultural operations. Potable Aqua™ PURE Water Purifier does not effectively reduce heavy metals or high levels of chemical contamination.
• Confirm how many liters of water are in your container
• Press orange activation button (about ½ second) to select a water volume (1L to 20L) – this may require pressing button multiple times until green light selects correct volume
Also see FREQUENTLY ASKED QUESTION 9 (page 14)
r MAKE DISINFECTANT WARNING Do not touch your eyes while using the device. PA PURE™ cre-ates a chemical mixed oxidant solution like chlorine bleach that can damage your eyes, irritate skin and permanently stain clothing. Keep at least 12 inches (30 cm) away from your face and clothing during this step and while pouring oxidant into your water container. Thoroughly rinse your PA PURE™ device and hands after use. (See First Aid instructions on page 5)
DO NOT allow blue PA PURE plug to contact or cover reaction chamber while disinfectant is being made. WAIT until water volume light turns off and bubbling has stopped before adding disinfectant to water container.
• Press and hold orange activation button (about 2 seconds) until green light flashes twice and solution starts to bubble (figure 4a), DO NOT allow blue plug to contact solution or cover reaction chamber
• When the green volume light turns off and bubbling stops (20 sec. up to 3 min.), the process is com- plete and one disinfectant dose is ready for use
• If treating 20L of water, the 20L light will begin blinking and continue to blink until more disinfectant is started (see Step t)
Also see FREQUENTLY ASKED QUESTIONS 10-13 (page 14)
6 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER INSTRUCTION MANUAL
SELECT AMOUNT OF WATER TO BE TREATED
Potable Aqua™ PURE INSTRUCTION MANUAL 7
For a fast & simple video demonstration of how to operate your PA PURE™ Electrolytic Water Purifier device, use your smart phone to scan this QR Code or go to www.potableaqua.com
SEE HOW IT WORKS!
q MAKE BRINE SOLUTION (SALT+WATER) • Locate the top of the device
• Open one of the two blue plugs labeled “SALT”
• Fill reservoir with salt, DO NOT over fill (figure 1a)
• Empty salt from reservoir into brine bottle (figure1b)
• Fill brine bottle to neck with water (any water may be used, even the water being treated)
• Apply cap and shake until salt is fully dissolved
Also see IMPORTANT USE TIPS (page 10) and FREQUENTLY ASKED QUESTIONS 1-8 (page 13)
wADD BRINE SOLUTION TO DEVICEDO NOT allow blue PA PURE plug to contact brine solution or cover reaction chamber while making disinfectant. DO NOT pick-up or move device while performing Steps w-r. Allow device to remain still, front side up on flat surface with blue plug open.
• Remove blue plug labeled “PA PURE” from reaction chamber• Stretch plug over top of device and secure in open position, DO NOT allow blue plug to contact or cover brine solution (figure 2a)• Lay the device on a flat surface and dispense brine solution (about 50 drops) into reaction chamber, do not over fill (figure 2b)
Also see IMPORTANT USE TIPS (page 10) and FREQUENTLY ASKED QUESTIONS 5-8 (page 13)
WARNING Choose the cleanest water available. Do not treat seawater. The PA PURE™ device does not make drinkable water out of salty or brackish water. Avoid water sources with high levels of chemical contamination such as mine tailing ponds and sources near large agricultural operations. Potable Aqua™ PURE Water Purifier does not effectively reduce heavy metals or high levels of chemical contamination.
• Confirm how many liters of water are in your container
• Press orange activation button (about ½ second) to select a water volume (1L to 20L) – this may require pressing button multiple times until green light selects correct volume
Also see FREQUENTLY ASKED QUESTION 9 (page 14)
r MAKE DISINFECTANT WARNING Do not touch your eyes while using the device. PA PURE™ cre-ates a chemical mixed oxidant solution like chlorine bleach that can damage your eyes, irritate skin and permanently stain clothing. Keep at least 12 inches (30 cm) away from your face and clothing during this step and while pouring oxidant into your water container. Thoroughly rinse your PA PURE™ device and hands after use. (See First Aid instructions on page 5)
DO NOT allow blue PA PURE plug to contact or cover reaction chamber while disinfectant is being made. WAIT until water volume light turns off and bubbling has stopped before adding disinfectant to water container.
• Press and hold orange activation button (about 2 seconds) until green light flashes twice and solution starts to bubble (figure 4a), DO NOT allow blue plug to contact solution or cover reaction chamber
• When the green volume light turns off and bubbling stops (20 sec. up to 3 min.), the process is com- plete and one disinfectant dose is ready for use
• If treating 20L of water, the 20L light will begin blinking and continue to blink until more disinfectant is started (see Step t)
Also see FREQUENTLY ASKED QUESTIONS 10-13 (page 14)
8 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
t DOSE WATER WITH DISINFECTANTINSTRUCTION MANUAL
Potable Aqua™ PURE INSTRUCTION MANUAL 9
• Pour disinfectant into untreated water (figure 5a), this is one standard dose
• If treating 20L of water, a second dose will be needed. Immediately repeat Steps w-r and add 2nd dose of disinfectant to container
• Attach lid to container and shake well
y DETERMINE NEXT STEPS a. Do you suspect Cryptosporidium* in your water?
NO Continue to yb YES Jump to Step o
b. Does your water appear cloudy/dirty?
NO Jump to Step u YES Continue to yc
c. Do you suspect Giardia* in your water?
NO Continue to Step u YES Jump to Step o
u DISINFECT LID AND CONTAINER THREADS• Remove lid from container
• Pour small amount of water-disinfectant mixture into lid, wetting screw threads (figure 7a)
• Tightly reattach lid to moisten the container threads, some liquid will spill down sides (figure 7b)
iWAIT 30 MINUTES BEFORE DRINKINGYou must wait 30 minutes to ensure inactivation of bacteria, viruses and giardia.
*Pre-filtering your water with a cyst removal filter (absolute pore size of 1 micron or smaller) before treating removes Cryptosporidium and Giardia, eliminating the need to test for chlorine residual as instructed in Steps o-1@, and ensuring a wait time of only 30 minutes. Go directly to Step u if you have pre-filtered your water with a cyst removal filter.
10-MINUTE CHLORINE CHECK Check your water for chlorine residual and complete treatment according to Steps o-1$ below ONLY IF you are treating for Crypto-sporidium or you suspect Giardia and your water looks cloudy/dirty
o POUR TREATED WATER INTO CONTAINER LID• 10-minutes after dosing your water with disinfectant, fill container lid with your treated water
1) REMOVE TEST STRIP FROM VIAL• Locate PA PURE™ Test Strips and remove one test strip from vial
1! DIP IN WATER FOR 10 SECONDS • Put test pad, located at end of test strip, into water in container lid and move back-and-forth for 10 seconds
1@ COMPARE TO COLOR CHART • Remove from water and immediately compare test pad to Color Chart on test strip vial. If test pad color is:
a. TOO LOW Chlorine level is NOT OK Repeat w-y until color is OK
b. OK/OK+ Chlorine level is OK Continue to Step 1#
1# DISINFECT CONTAINER THREADS• Pour small amount of treated water into lid then lightly reattach lid to container. Some liquid will spill down sides.
1$ WAIT BEFORE DRINKING a. For Giardia wait 30 minutes before drinking b. For Cryptosporidium wait 4 hours before drinking
ta
o
1!
1@
ua
ub
8 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
t DOSE WATER WITH DISINFECTANTINSTRUCTION MANUAL
Potable Aqua™ PURE INSTRUCTION MANUAL 9
• Pour disinfectant into untreated water (figure 5a), this is one standard dose
• If treating 20L of water, a second dose will be needed. Immediately repeat Steps w-r and add 2nd dose of disinfectant to container
• Attach lid to container and shake well
y DETERMINE NEXT STEPS a. Do you suspect Cryptosporidium* in your water?
NO Continue to yb YES Jump to Step o
b. Does your water appear cloudy/dirty?
NO Jump to Step u YES Continue to yc
c. Do you suspect Giardia* in your water?
NO Continue to Step u YES Jump to Step o
u DISINFECT LID AND CONTAINER THREADS• Remove lid from container
• Pour small amount of water-disinfectant mixture into lid, wetting screw threads (figure 7a)
• Tightly reattach lid to moisten the container threads, some liquid will spill down sides (figure 7b)
iWAIT 30 MINUTES BEFORE DRINKINGYou must wait 30 minutes to ensure inactivation of bacteria, viruses and giardia.
*Pre-filtering your water with a cyst removal filter (absolute pore size of 1 micron or smaller) before treating removes Cryptosporidium and Giardia, eliminating the need to test for chlorine residual as instructed in Steps o-1@, and ensuring a wait time of only 30 minutes. Go directly to Step u if you have pre-filtered your water with a cyst removal filter.
10-MINUTE CHLORINE CHECK Check your water for chlorine residual and complete treatment according to Steps o-1$ below ONLY IF you are treating for Crypto-sporidium or you suspect Giardia and your water looks cloudy/dirty
o POUR TREATED WATER INTO CONTAINER LID• 10-minutes after dosing your water with disinfectant, fill container lid with your treated water
1) REMOVE TEST STRIP FROM VIAL• Locate PA PURE™ Test Strips and remove one test strip from vial
1! DIP IN WATER FOR 10 SECONDS • Put test pad, located at end of test strip, into water in container lid and move back-and-forth for 10 seconds
1@ COMPARE TO COLOR CHART • Remove from water and immediately compare test pad to Color Chart on test strip vial. If test pad color is:
a. TOO LOW Chlorine level is NOT OK Repeat w-y until color is OK
b. OK/OK+ Chlorine level is OK Continue to Step 1#
1# DISINFECT CONTAINER THREADS• Pour small amount of treated water into lid then lightly reattach lid to container. Some liquid will spill down sides.
1$ WAIT BEFORE DRINKING a. For Giardia wait 30 minutes before drinking b. For Cryptosporidium wait 4 hours before drinking
ta
o
1!
1@
ua
ub
10 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
IMPORTANT USE, CARE & STORAGE TIPS
INSTRUCTION MANUAL
IMPORTANT USE, CARE & STORAGE TIPS
Potable Aqua™ PURE INSTRUCTION MANUAL 11
PA PURE™ Device
Use and Care • Position at least 12” inches away from face and clothing during use • Do not touch eyes while using device • Thoroughly rinse device and hands after each use
Storage • Store in cool, dry place between -4°F to 140°F / -20°C to 60°C • Rinse and dry inside of reaction chamber before long-term storage
Integrated Flashlight
Turn On • Press and hold the orange activation button about 3 seconds to turn on • All other device lights must be off before flashlight will turn on
Turn Off • Press orange activation to turn flashlight off • If not turned off, flashlight automatically goes out after about 15 min
Brine Solution
Brine Bottle • Solution made in bottle according to Step w can generate up to 10 doses of disinfectant • If brine bottle is unavailable or there is not enough salt to make a full bottle of brine solution, you may mix brine solution directly in reaction chamber of the device – see Question 6 on page 13
Salt • Food grade salt is recommended, but if not available any sodium chloride salt can be used • Be sure salt is fully dissolved before using or brine concentration may be too low • Store extra salt in Salt Reservoirs, ensuring Salt Plugs are secured tightly, with additional salt stored in sealed container protected from moisture • Each salt reservoir holds approximately ¾ teaspoon of salt
Water • Clean water is recommended to make brine solution, but if not available any water can be used
Temperature • Do not use brine solution below its freezing temperature of about 15°F/-9°C
Battery
First Use • Before using device for the first time, charge until green Charging Status Indicator light turns off, indicating battery is fully charged
Storage • Batteries can discharge over time if not used, but PA PURE™ device is designed to prevent complete discharge from occurring
• If stored in dark or where solar panel does not get sunlight, partially recharge device every 6 months • For long-term storage, it is better if the battery is ½ charged instead of fully charged
Temperature • In extreme low temperatures, battery will provide less power • If Low Battery Indicator lights up due to cold temperature, warm device using body heat
Lifetime • Battery has maximum use life of up to 10 years, after which the device must be replaced • End-of-life is indicated by continued inability to hold charge for any length of time • Functionality can be optimized by partially (about 50%) charging every 6 months
Treated Water
Cloudy/Dirty • When collecting water to treat, choose cleanest looking water available • If dirty looking water is unavoidable, it’s beneficial to remove particulate matter before treating with cloth, paper towel, clothing item, coffee filter or similar filter material
Temperature • Do not treat water containing ice – ice can protect microbes and treatment may not be effective
PA PURE™ Chlorine Test Strips
Use and Care • Used to test for chlorine residual as directed in Steps o-1@ ONLY if Cryptosporidium, or Giardia in cloudy/dirty looking water, is suspected • Store in cool place with test strips in original vial, closed and tightly sealed • Do not remove desiccant packet from vial • See test strip vial for expiration date • Do not use past expiration date printed on vial label – see Question 15 on page 14
Component Tip/Recommendation Component Tip/Recommendation
10 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
IMPORTANT USE, CARE & STORAGE TIPS
INSTRUCTION MANUAL
IMPORTANT USE, CARE & STORAGE TIPS
Potable Aqua™ PURE INSTRUCTION MANUAL 11
PA PURE™ Device
Use and Care • Position at least 12” inches away from face and clothing during use • Do not touch eyes while using device • Thoroughly rinse device and hands after each use
Storage • Store in cool, dry place between -4°F to 140°F / -20°C to 60°C • Rinse and dry inside of reaction chamber before long-term storage
Integrated Flashlight
Turn On • Press and hold the orange activation button about 3 seconds to turn on • All other device lights must be off before flashlight will turn on
Turn Off • Press orange activation to turn flashlight off • If not turned off, flashlight automatically goes out after about 15 min
Brine Solution
Brine Bottle • Solution made in bottle according to Step w can generate up to 10 doses of disinfectant • If brine bottle is unavailable or there is not enough salt to make a full bottle of brine solution, you may mix brine solution directly in reaction chamber of the device – see Question 6 on page 13
Salt • Food grade salt is recommended, but if not available any sodium chloride salt can be used • Be sure salt is fully dissolved before using or brine concentration may be too low • Store extra salt in Salt Reservoirs, ensuring Salt Plugs are secured tightly, with additional salt stored in sealed container protected from moisture • Each salt reservoir holds approximately ¾ teaspoon of salt
Water • Clean water is recommended to make brine solution, but if not available any water can be used
Temperature • Do not use brine solution below its freezing temperature of about 15°F/-9°C
Battery
First Use • Before using device for the first time, charge until green Charging Status Indicator light turns off, indicating battery is fully charged
Storage • Batteries can discharge over time if not used, but PA PURE™ device is designed to prevent complete discharge from occurring
• If stored in dark or where solar panel does not get sunlight, partially recharge device every 6 months • For long-term storage, it is better if the battery is ½ charged instead of fully charged
Temperature • In extreme low temperatures, battery will provide less power • If Low Battery Indicator lights up due to cold temperature, warm device using body heat
Lifetime • Battery has maximum use life of up to 10 years, after which the device must be replaced • End-of-life is indicated by continued inability to hold charge for any length of time • Functionality can be optimized by partially (about 50%) charging every 6 months
Treated Water
Cloudy/Dirty • When collecting water to treat, choose cleanest looking water available • If dirty looking water is unavoidable, it’s beneficial to remove particulate matter before treating with cloth, paper towel, clothing item, coffee filter or similar filter material
Temperature • Do not treat water containing ice – ice can protect microbes and treatment may not be effective
PA PURE™ Chlorine Test Strips
Use and Care • Used to test for chlorine residual as directed in Steps o-1@ ONLY if Cryptosporidium, or Giardia in cloudy/dirty looking water, is suspected • Store in cool place with test strips in original vial, closed and tightly sealed • Do not remove desiccant packet from vial • See test strip vial for expiration date • Do not use past expiration date printed on vial label – see Question 15 on page 14
Component Tip/Recommendation Component Tip/Recommendation
12 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
PROBLEMS & SOLUTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 13
Salt and Brine Solution
1. What type of salt can I use? Food grade salt is recommended since it dissolves rapidly and is easy to add to the brine bottle. However, if food grade is unavailable any type of sodium chloride salt can be used (e.g., granular salt, rock salt, etc.).
2. How much salt is held in each salt reservoir? One reservoir, filled to just below the top (so that the salt plug can be securely closed), holds approximately 4 ml or a rounded ¾ teaspoon of salt.
3. How much salt do I add to the brine bottle? Add one reservoir of salt (about 4 ml or a rounded ¾ teaspoon) to the brine bottle to make one bottle of brine solution.
4. What if I don’t mix the brine solution exactly right and the concentration is incorrect?
Some variation in concentration of the brine solution is OK – exactness is not required. That said, if your brine concentration is so low that PA PURE™ can’t make disinfectant strong enough to purify your water, the LOW SALT icon will light and you will be required to correct the problem (See Problems & Solutions Table on page 12) before activating the device.
5. What type of water can I use to mix the brine solution? Any water, including the water that is to be treated, may be used to mix the brine solution. It is recommended to use the cleanest water you can find, but you do not need to bring any special water from home.
6. What should I do if I lose my brine bottle? If you lose the brine bottle included with PA PURE™, you may use another 1-ounce bottle with cap to mix a brine solution as directed in Step q. Alterna- tively, you can make brine solution directly in the reaction chamber of the device by adding a pinch of salt (1/16th teaspoon) to the chamber, filling the chamber with water, then covering the chamber with your thumb or finger and shaking thoroughly to dissolve the salt.
7. How much disinfectant can be made from one full brine bottle? When made according to Step q, the brine bottle holds 1 ounce of brine solution or enough to make 10 doses of disinfectant.
8. How much brine solution do I add to the device? The volume of brine solution required to fill the reaction chamber is 2.5 ml, or about 50 drops from the brine bottle.
PROBLEM MEANING CAUSE SOLUTION
Solid Light
Blinking Light
Does Not Light When Trying To Charge
Solid Light
Battery No LongerHolds Charge
White Substance Around Reaction Chamber
Can’t Close Salt Plugs After Filling Salt Reservoir
Not enough salt to activate the deviceor complete cycle
There is an electrical short
Battery is not actively charging
Battery power is too low
Battery has reached end of life
Non-harmful sodium chloride (salt) residue from previous use
Not enough room to attach salt plug into reservoir
1. Salt concentration too low, or
2. Brine level too low in reaction chamber
Metal object is lodged in the reaction chamber
1. Battery is fully charged, or2. Loose USB connection, or3. Insufficient sunlight to solar panel, or4. Battery has exceeded lifetime charge capacity
1. Battery has been discharged, or2. Battery is cold
Battery has limited functional life span up to 10 years or 500 charges
Device was not thoroughly rinsed after use prior to storage
Salt fill level is too high
1. Increase salt concentration by either replacing with new brine solution made according to Stepq or adding a pinch of salt to reaction chamber2. Fill reaction chamber to brim with brine solution according to Stepw
Check the reaction chamber for foreign metal and remove
1. Remove USB cable, charge complete2. Adjust USB cable for firm connection3. Ensure solar panel is in full sunlight (NOTE – Charging Status Indicator lights more dimly during solar charge)4. Replace PA PURE™ device
1. Recharge battery (NOTE– If indicator lights while making disinfectant, empty reaction chamber and recharge before restarting the process)2. Warm battery with body heat Must replace PA PURE™ device, battery is not replaceable
Thoroughly rinse the device in and around reaction chamber after each use and dry reaction chamber before long-term storage
Gently shake a small amount of salt out of the reservoir until the salt plug can be securely reattached and snapped into place
12 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
PROBLEMS & SOLUTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 13
Salt and Brine Solution
1. What type of salt can I use? Food grade salt is recommended since it dissolves rapidly and is easy to add to the brine bottle. However, if food grade is unavailable any type of sodium chloride salt can be used (e.g., granular salt, rock salt, etc.).
2. How much salt is held in each salt reservoir? One reservoir, filled to just below the top (so that the salt plug can be securely closed), holds approximately 4 ml or a rounded ¾ teaspoon of salt.
3. How much salt do I add to the brine bottle? Add one reservoir of salt (about 4 ml or a rounded ¾ teaspoon) to the brine bottle to make one bottle of brine solution.
4. What if I don’t mix the brine solution exactly right and the concentration is incorrect?
Some variation in concentration of the brine solution is OK – exactness is not required. That said, if your brine concentration is so low that PA PURE™ can’t make disinfectant strong enough to purify your water, the LOW SALT icon will light and you will be required to correct the problem (See Problems & Solutions Table on page 12) before activating the device.
5. What type of water can I use to mix the brine solution? Any water, including the water that is to be treated, may be used to mix the brine solution. It is recommended to use the cleanest water you can find, but you do not need to bring any special water from home.
6. What should I do if I lose my brine bottle? If you lose the brine bottle included with PA PURE™, you may use another 1-ounce bottle with cap to mix a brine solution as directed in Step q. Alterna- tively, you can make brine solution directly in the reaction chamber of the device by adding a pinch of salt (1/16th teaspoon) to the chamber, filling the chamber with water, then covering the chamber with your thumb or finger and shaking thoroughly to dissolve the salt.
7. How much disinfectant can be made from one full brine bottle? When made according to Step q, the brine bottle holds 1 ounce of brine solution or enough to make 10 doses of disinfectant.
8. How much brine solution do I add to the device? The volume of brine solution required to fill the reaction chamber is 2.5 ml, or about 50 drops from the brine bottle.
PROBLEM MEANING CAUSE SOLUTION
Solid Light
Blinking Light
Does Not Light When Trying To Charge
Solid Light
Battery No LongerHolds Charge
White Substance Around Reaction Chamber
Can’t Close Salt Plugs After Filling Salt Reservoir
Not enough salt to activate the deviceor complete cycle
There is an electrical short
Battery is not actively charging
Battery power is too low
Battery has reached end of life
Non-harmful sodium chloride (salt) residue from previous use
Not enough room to attach salt plug into reservoir
1. Salt concentration too low, or
2. Brine level too low in reaction chamber
Metal object is lodged in the reaction chamber
1. Battery is fully charged, or2. Loose USB connection, or3. Insufficient sunlight to solar panel, or4. Battery has exceeded lifetime charge capacity
1. Battery has been discharged, or2. Battery is cold
Battery has limited functional life span up to 10 years or 500 charges
Device was not thoroughly rinsed after use prior to storage
Salt fill level is too high
1. Increase salt concentration by either replacing with new brine solution made according to Stepq or adding a pinch of salt to reaction chamber2. Fill reaction chamber to brim with brine solution according to Stepw
Check the reaction chamber for foreign metal and remove
1. Remove USB cable, charge complete2. Adjust USB cable for firm connection3. Ensure solar panel is in full sunlight (NOTE – Charging Status Indicator lights more dimly during solar charge)4. Replace PA PURE™ device
1. Recharge battery (NOTE– If indicator lights while making disinfectant, empty reaction chamber and recharge before restarting the process)2. Warm battery with body heat Must replace PA PURE™ device, battery is not replaceable
Thoroughly rinse the device in and around reaction chamber after each use and dry reaction chamber before long-term storage
Gently shake a small amount of salt out of the reservoir until the salt plug can be securely reattached and snapped into place
14 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
FREQUENTLY ASKED QUESTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 15
Using the PA PURE™ Device
9. I am using a ½ gallon container, how many liters is that? One half gallon of water (2 quarts) is equivalent to about 2 liters.
32 oz. = 1 quart = 1 liter
64 oz. = 2 quarts = 2 liters
1 3 gallons = 53 quarts = 5 liters
10. Should I cover the reaction chamber with the blue PA PURE™ rubber plug while disinfectant is being made?
No, do not allow the plug to cover the chamber while disinfectant is being made.
11. Can I move or hold the device while disinfectant is being made? No, the device should remain stationary, front side up on a flat surface with blue plug open while disinfectant is being made.
12. How long does it take for PA PURE™ to make disinfectant? PA PURE™ generates a more concentrated disinfectant for larger water volumes. Making more concentrated disinfectant takes more time, so the device cycles longer for larger water volumes (20 seconds for 1L up to about 3 minutes for 10L).
13. Why does the 20L icon start blinking after making one disinfectant dose? When treating 20L of water, disinfectant dosing requirements are doubled. The 20L
icon starts blinking after making the 1st dose to indicate a 2nd disinfectant dose must be made. After adding the first dose to your water, immediately repeat Steps w-t, then add the 2nd dose of disinfectant to your container.
14. I don’t know if my water contains Cryptosporidium, what should I do? If you’re uncertain about the presence of Cryptosporidium in your water and have not pre-filtered with a cyst removal filter (absolute pore size of 1 micron or smaller), it is recommended you treat your water as if Cryptosporidium is present.
15. My test strips are expired (or unavailable) and although my water looks clean/clear, I’m still worried about Cryptosporidium – what should I do?
If you haven’t pre-filtered your water with a cyst removal filter and don’t have usable test strips to check for chlorine residual, you must increase the disinfectant dose by a factor of 8X to ensure inactivation of suspected cryptosporidium (i.e., dose your water as if the volume were 8 times larger). For example, to treat 1L of water susect-ed of crypto with no test strips, you need to dose your 1L as if it were 8L, adding 4 disinfectant doses, each made for a 2L volume, to your water. (i.e., repeating Steps w-tfour times, selecting 2L each time)
16. I’d rather buy more test strips than add an 8X larger disinfectant dose to my water – can I purchase more PA PURE™ test strips?
Yes, go to www.potableaqua.com for information about how to purchase more PA PURE™ Chlorine Test Strips.
17. I am concerned about Giardia in my water, but not sure if I’m supposed to use the PA PURE test strips or not – what should I do?
The mixed oxidant disinfectant made by PA PURE™ does effectively inacti-vate Giardia in just 30 minutes. However, if your water has a cloudy or dirty look to it, you must confirm it has sufficient chlorine residual as directed in Steps o-1@, and this requires use of PA PURE™ Test Strips. See the table below for a summary of treatment and wait times requirements.
PA PURE™ Treatment & Wait Time Summary Table
Water Looks Microorganism Clear or Cloudy? Treatment Steps Wait Time
Bacteria & Virus Either Stepsw-t Steps u-i
Giardia
Clean/Clear Stepsw-t Steps u-i 30 min
Cloudy/Dirty Stepsw-t Steps o-1$
Cryptosporidium Either Stepsw-t Steps o-1$ 4 hours
About the Disinfectant Made by PA PURE™ Device
18. What is the concentration of one disinfectant dose?When used as instructed, the concentration of one disinfectant dose, after added to the water being treated, is 5 mg/L FAC (Free Available Chlorine).
19. What is “residual disinfectant” and why does it matter? Unlike physical treatment methods (i.e. filters or ultraviolet disinfection), purifi-cation with mixed oxidants leaves a trace amount of disinfectant in the water container. This little bit of disinfectant provides extended protection that helps to prevent the formation of biogrowth/slime in the water storage container.
20. How will water taste after treatment by PA PURE™? Treated water will contain chlorine residual to help protect it from recon-tamination and that residual may impart a chlorine taste. The ability to taste this residual provides verification that you have extended protection of your treated water.
14 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
FREQUENTLY ASKED QUESTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 15
Using the PA PURE™ Device
9. I am using a ½ gallon container, how many liters is that? One half gallon of water (2 quarts) is equivalent to about 2 liters.
32 oz. = 1 quart = 1 liter
64 oz. = 2 quarts = 2 liters
1 3 gallons = 53 quarts = 5 liters
10. Should I cover the reaction chamber with the blue PA PURE™ rubber plug while disinfectant is being made?
No, do not allow the plug to cover the chamber while disinfectant is being made.
11. Can I move or hold the device while disinfectant is being made? No, the device should remain stationary, front side up on a flat surface with blue plug open while disinfectant is being made.
12. How long does it take for PA PURE™ to make disinfectant? PA PURE™ generates a more concentrated disinfectant for larger water volumes. Making more concentrated disinfectant takes more time, so the device cycles longer for larger water volumes (20 seconds for 1L up to about 3 minutes for 10L).
13. Why does the 20L icon start blinking after making one disinfectant dose? When treating 20L of water, disinfectant dosing requirements are doubled. The 20L
icon starts blinking after making the 1st dose to indicate a 2nd disinfectant dose must be made. After adding the first dose to your water, immediately repeat Steps w-t, then add the 2nd dose of disinfectant to your container.
14. I don’t know if my water contains Cryptosporidium, what should I do? If you’re uncertain about the presence of Cryptosporidium in your water and have not pre-filtered with a cyst removal filter (absolute pore size of 1 micron or smaller), it is recommended you treat your water as if Cryptosporidium is present.
15. My test strips are expired (or unavailable) and although my water looks clean/clear, I’m still worried about Cryptosporidium – what should I do?
If you haven’t pre-filtered your water with a cyst removal filter and don’t have usable test strips to check for chlorine residual, you must increase the disinfectant dose by a factor of 8X to ensure inactivation of suspected cryptosporidium (i.e., dose your water as if the volume were 8 times larger). For example, to treat 1L of water susect-ed of crypto with no test strips, you need to dose your 1L as if it were 8L, adding 4 disinfectant doses, each made for a 2L volume, to your water. (i.e., repeating Steps w-tfour times, selecting 2L each time)
16. I’d rather buy more test strips than add an 8X larger disinfectant dose to my water – can I purchase more PA PURE™ test strips?
Yes, go to www.potableaqua.com for information about how to purchase more PA PURE™ Chlorine Test Strips.
17. I am concerned about Giardia in my water, but not sure if I’m supposed to use the PA PURE test strips or not – what should I do?
The mixed oxidant disinfectant made by PA PURE™ does effectively inacti-vate Giardia in just 30 minutes. However, if your water has a cloudy or dirty look to it, you must confirm it has sufficient chlorine residual as directed in Steps o-1@, and this requires use of PA PURE™ Test Strips. See the table below for a summary of treatment and wait times requirements.
PA PURE™ Treatment & Wait Time Summary Table
Water Looks Microorganism Clear or Cloudy? Treatment Steps Wait Time
Bacteria & Virus Either Stepsw-t Steps u-i
Giardia
Clean/Clear Stepsw-t Steps u-i 30 min
Cloudy/Dirty Stepsw-t Steps o-1$
Cryptosporidium Either Stepsw-t Steps o-1$ 4 hours
About the Disinfectant Made by PA PURE™ Device
18. What is the concentration of one disinfectant dose?When used as instructed, the concentration of one disinfectant dose, after added to the water being treated, is 5 mg/L FAC (Free Available Chlorine).
19. What is “residual disinfectant” and why does it matter? Unlike physical treatment methods (i.e. filters or ultraviolet disinfection), purifi-cation with mixed oxidants leaves a trace amount of disinfectant in the water container. This little bit of disinfectant provides extended protection that helps to prevent the formation of biogrowth/slime in the water storage container.
20. How will water taste after treatment by PA PURE™? Treated water will contain chlorine residual to help protect it from recon-tamination and that residual may impart a chlorine taste. The ability to taste this residual provides verification that you have extended protection of your treated water.
26. How many times can the battery be recharged? The battery can be recharged more than 500 times with the on-board micro USB port. PA PURE™ shelf-life can be maximized by partially charging (about 50%) every 6 months.
27. What should I do if I lose the USB cable and/or power adapter that came with my PA PURE™ device?
You can use the integrated solar charger on the back of the device to recharge the battery. One hour of direct sunlight provides enough charge to disinfect about 2L* of water. For a faster charge, the device uses a 5V universal USB power adapter and a “type-A to micro-b” USB cable which can be purchased at most electronics stores and online retailers.
PRODUCT SPECIFICATIONSPA PURE™ DEVICEWeight 3.8 oz / 108 g
Dimensions 1.2” x 1.7” x 3.7”
Operating Temperature 20º to 130ºF / -6º to 54ºC
Water Resistant 60 feet / 18 m
Maximum Altitude 60,000 feet / 18 km
Battery Life Rechargeable lithium ion polymer battery Over 500 charges with a 10-year shelf life
Reaction Chamber Volume 0.085 oz / 2.5 mL
Treatment Capacity* Lifetime 60,000+ Liters* Fully Charged 150+ Liters* 1 Hour USB Charge 35 Liters* 1 Hour Solar Charge 2 Liters*
Microbiological Performance= Bacteria 6 log reduction / 99.9999% kill / 30 minutes Virus 4 log reduction / 99.99% kill / 30 minutesGiardia Lamblia 3 log reduction / 99.9% kill / 30 minutesCryptosporidium 3 log reduction / 99.9% kill / 4 hours
*Volumes are based on a standard single dose in alignment with the EPA Guide Standard & Protocol for Testing Microbiological Water Purifiers. Treating for protozoa may require dosing in excess of the standard, and may reduce the total volume of water that can be treated on one battery charge
16 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
FREQUENTLY ASKED QUESTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 17
WHAT PA PURE DOES & DOESN’T DO
21. What organisms are killed by PA PURE™? The Potable Aqua PURE Electrolytic Purifier has been tested against and shown to meet the requirements identified in the U.S. EPA Guide Standard and Protocol for Testing Microbiological Water Purifiers, destroying over 99.9999% of bacteria, 99.99% of viruses, and 99.9% of protozoa when used as directed. Tests have also shown compliance with aspects of the World Health Organization’s (WHO) Household Water Treatment Standard. For additional details, please refer to our website at www.potableaqua.com.
22. How do I know the water is safe to drink?The dosage guidelines and wait times (See PA PURE™ Treatment & Wait Time Summary, page 15) are based on treating EPA’s worst case water so post treatment testing is not required to demonstrate safety when using the PA PURE™ device. However, if you prefer visual confirmation of efficacy, PA PURE™ Chlorine Test Strips may also be used to verify the presence of trace residual chlorine after the required wait time. A trace residual chlorine at the end of the wait time ( indicated by any blue/green color at all on the test pad, no matter how faint) confirms that ample disinfectant was added to your water to inactivate all microorganisms in the specified wait time.
23. Will PA PURE™ remove heavy metals, pesticides, or pharmaceuticals? No, PA PURE™ is designed for microbiological treatment to prevent the contraction of waterborne disease resulting from bacteria, viruses, and protozoan cysts, including Cholera, E. coli, Giardia, etc.
24. Does the PA PURE™ Purifier filter dirt? No, however it can make the water safe to drink even if it still looks dirty. Since most of us don’t like to drink dirty-looking water (no matter how safe it may be!), an easy method for dirt removal is to pre-filter the water with a cloth, paper towel, coffee filter, or similar material.
MISCELLANEOUS
25 How many liters of water will the PA PURE™ device treat? The Potable Aqua™ PURE device can be expected to treat more than 60,000 liters* of water over its lifetime with no replacement parts. Each complete battery charge can generate enough disinfectant to treat about 150 liters* (40 gallons) of water and the integrated solar panel can transform one hour of sunlight into treatment of 2 liters* (2 gallon) of water.
26. How many times can the battery be recharged? The battery can be recharged more than 500 times with the on-board micro USB port. PA PURE™ shelf-life can be maximized by partially charging (about 50%) every 6 months.
27. What should I do if I lose the USB cable and/or power adapter that came with my PA PURE™ device?
You can use the integrated solar charger on the back of the device to recharge the battery. One hour of direct sunlight provides enough charge to disinfect about 2L* of water. For a faster charge, the device uses a 5V universal USB power adapter and a “type-A to micro-b” USB cable which can be purchased at most electronics stores and online retailers.
PRODUCT SPECIFICATIONSPA PURE™ DEVICEWeight 3.8 oz / 108 g
Dimensions 1.2” x 1.7” x 3.7”
Operating Temperature 20º to 130ºF / -6º to 54ºC
Water Resistant 60 feet / 18 m
Maximum Altitude 60,000 feet / 18 km
Battery Life Rechargeable lithium ion polymer battery Over 500 charges with a 10-year shelf life
Reaction Chamber Volume 0.085 oz / 2.5 mL
Treatment Capacity* Lifetime 60,000+ Liters* Fully Charged 150+ Liters* 1 Hour USB Charge 35 Liters* 1 Hour Solar Charge 2 Liters*
Microbiological Performance= Bacteria 6 log reduction / 99.9999% kill / 30 minutes Virus 4 log reduction / 99.99% kill / 30 minutesGiardia Lamblia 3 log reduction / 99.9% kill / 30 minutesCryptosporidium 3 log reduction / 99.9% kill / 4 hours
*Volumes are based on a standard single dose in alignment with the EPA Guide Standard & Protocol for Testing Microbiological Water Purifiers. Treating for protozoa may require dosing in excess of the standard, and may reduce the total volume of water that can be treated on one battery charge
16 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
FREQUENTLY ASKED QUESTIONSINSTRUCTION MANUAL
FREQUENTLY ASKED QUESTIONS
Potable Aqua™ PURE INSTRUCTION MANUAL 17
WHAT PA PURE DOES & DOESN’T DO
21. What organisms are killed by PA PURE™? The Potable Aqua PURE Electrolytic Purifier has been tested against and shown to meet the requirements identified in the U.S. EPA Guide Standard and Protocol for Testing Microbiological Water Purifiers, destroying over 99.9999% of bacteria, 99.99% of viruses, and 99.9% of protozoa when used as directed. Tests have also shown compliance with aspects of the World Health Organization’s (WHO) Household Water Treatment Standard. For additional details, please refer to our website at www.potableaqua.com.
22. How do I know the water is safe to drink?The dosage guidelines and wait times (See PA PURE™ Treatment & Wait Time Summary, page 15) are based on treating EPA’s worst case water so post treatment testing is not required to demonstrate safety when using the PA PURE™ device. However, if you prefer visual confirmation of efficacy, PA PURE™ Chlorine Test Strips may also be used to verify the presence of trace residual chlorine after the required wait time. A trace residual chlorine at the end of the wait time ( indicated by any blue/green color at all on the test pad, no matter how faint) confirms that ample disinfectant was added to your water to inactivate all microorganisms in the specified wait time.
23. Will PA PURE™ remove heavy metals, pesticides, or pharmaceuticals? No, PA PURE™ is designed for microbiological treatment to prevent the contraction of waterborne disease resulting from bacteria, viruses, and protozoan cysts, including Cholera, E. coli, Giardia, etc.
24. Does the PA PURE™ Purifier filter dirt? No, however it can make the water safe to drink even if it still looks dirty. Since most of us don’t like to drink dirty-looking water (no matter how safe it may be!), an easy method for dirt removal is to pre-filter the water with a cloth, paper towel, coffee filter, or similar material.
MISCELLANEOUS
25 How many liters of water will the PA PURE™ device treat? The Potable Aqua™ PURE device can be expected to treat more than 60,000 liters* of water over its lifetime with no replacement parts. Each complete battery charge can generate enough disinfectant to treat about 150 liters* (40 gallons) of water and the integrated solar panel can transform one hour of sunlight into treatment of 2 liters* (2 gallon) of water.
18 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
USA PRODUCT LIMITED WARRANTYINSTRUCTION MANUAL
WARRANTY SERVICE
Potable Aqua™ PURE INSTRUCTION MANUAL 19
Your Potable Aqua™ PURE Electrolytic Water Purifier device (the “Product”) is warranted by Wisconsin Pharmacal Company (the “Company”) to conform to the Product Specifications presented on page 17 of the Instruction Manual, and to be free from defect in materials or workmanship under normal use and service for one year from the date of original purchase. The limited warranty period for any replacement Product under this Limited Warranty shall be the remainder of the original one-year warranty period.
This Limited Warranty extends only to Products sold in the United States to the original end-user purchaser (the “Owner”) by Company or by retailers and distributors authorized by Company. Company’s sole obligation under this Limit-ed Warranty, and Owner’s exclusive remedy, is to: (a) repair or replace, at Compa-ny’s sole discretion, free of charge, any Product that Company determines to be nonconforming or defective, or (b) refund the price paid for such Product. Owner’s right to such remedy under this Limited Warranty requires that any nonconforming or defective Product be returned directly to the Company: DO NOT RETURN PRODUCT TO A RETAILER OR DISTRIBUTOR for repair, replacement or refund under this Limited Warranty. Company reserves the right to utilize reconditioned, refurbished, repaired or re-manufactured Products in the warranty repair or replacement process. Such repaired or replacement Products will be comparable in value, function and performance to an original Product and warranted for the remainder of the original warranty period.
EXCLUSIONS TO THE LIMITED WARRANTYThis Limited Warranty does not apply to and Company offers NO WARRANTY with respect to: (a) any cosmetic defects that have no bearing on the Product’s intended function or operation; (b) any Products which have been subject to alterations in any way, improper maintenance, misuse, abuse, negligence, ac-cident, improper storage or use in a manner or for purposes inconsistent with its design, labeling or intended purpose; (c) damage caused by use contrary to the Instruction Manual and any warnings from Company; (d) damage caused by extreme weather conditions; (e) damage caused by exposure to chemicals or abrasive cleaners; (f) damage caused by normal wear and tear; (g) Product accessories including, but not limited to, the USB cable and power adapter; or (h) Product that is returned to a retailer or distributor and not to the Company.
To be eligible for service under this Limited Warranty, Owner must:
(1) present evidence of the warranty start date to the Company with valid proof of purchase by either registering the Product online at www.potableaqua.com within 30 days of purchase (please note that online registration requires Owner to upload an image of valid proof of purchase receipt), or retaining and sending copy of the original proof of purchase receipt,
(2) report and describe the Product nonconformity or defect to the Company by calling a Customer Service Representative at (800) 558-6614 between the hours of 8 a.m. and 4:30 p.m. CST, Monday through Friday, or via e-mail at [email protected] within seven days of discovering the covered defect, and
(3) establish eligibility for service under this Limited Warranty directly with the Company and not with a retailer or distributor of the Product.
DO NOT CONTACT A RETAILER OR DISTRIBUTOR OF THE PRODUCT FOR REPAIR, REPLACEMENT OR REFUND under this Limited Warranty. Once eligibility for service under this Limited Warranty has been established by the Company, a Return Authorization Number will be issued and detailed shipping instructions provided.
DO NOT SHIP OR RETURN PRODUCT WITHOUT A RETURN AUTHO-RIZATION NUMBER. Products shipped without a Return Authorization Number will not be accepted for service under this Limited Warranty and will be returned to the Owner at the Owner’s expense.
18 Potable Aqua™ PURE INSTRUCTION MANUAL
PA PURE™ ELECTROLYTIC WATER PURIFIER
USA PRODUCT LIMITED WARRANTYINSTRUCTION MANUAL
WARRANTY SERVICE
Potable Aqua™ PURE INSTRUCTION MANUAL 19
Your Potable Aqua™ PURE Electrolytic Water Purifier device (the “Product”) is warranted by Wisconsin Pharmacal Company (the “Company”) to conform to the Product Specifications presented on page 17 of the Instruction Manual, and to be free from defect in materials or workmanship under normal use and service for one year from the date of original purchase. The limited warranty period for any replacement Product under this Limited Warranty shall be the remainder of the original one-year warranty period.
This Limited Warranty extends only to Products sold in the United States to the original end-user purchaser (the “Owner”) by Company or by retailers and distributors authorized by Company. Company’s sole obligation under this Limit-ed Warranty, and Owner’s exclusive remedy, is to: (a) repair or replace, at Compa-ny’s sole discretion, free of charge, any Product that Company determines to be nonconforming or defective, or (b) refund the price paid for such Product. Owner’s right to such remedy under this Limited Warranty requires that any nonconforming or defective Product be returned directly to the Company: DO NOT RETURN PRODUCT TO A RETAILER OR DISTRIBUTOR for repair, replacement or refund under this Limited Warranty. Company reserves the right to utilize reconditioned, refurbished, repaired or re-manufactured Products in the warranty repair or replacement process. Such repaired or replacement Products will be comparable in value, function and performance to an original Product and warranted for the remainder of the original warranty period.
EXCLUSIONS TO THE LIMITED WARRANTYThis Limited Warranty does not apply to and Company offers NO WARRANTY with respect to: (a) any cosmetic defects that have no bearing on the Product’s intended function or operation; (b) any Products which have been subject to alterations in any way, improper maintenance, misuse, abuse, negligence, ac-cident, improper storage or use in a manner or for purposes inconsistent with its design, labeling or intended purpose; (c) damage caused by use contrary to the Instruction Manual and any warnings from Company; (d) damage caused by extreme weather conditions; (e) damage caused by exposure to chemicals or abrasive cleaners; (f) damage caused by normal wear and tear; (g) Product accessories including, but not limited to, the USB cable and power adapter; or (h) Product that is returned to a retailer or distributor and not to the Company.
To be eligible for service under this Limited Warranty, Owner must:
(1) present evidence of the warranty start date to the Company with valid proof of purchase by either registering the Product online at www.potableaqua.com within 30 days of purchase (please note that online registration requires Owner to upload an image of valid proof of purchase receipt), or retaining and sending copy of the original proof of purchase receipt,
(2) report and describe the Product nonconformity or defect to the Company by calling a Customer Service Representative at (800) 558-6614 between the hours of 8 a.m. and 4:30 p.m. CST, Monday through Friday, or via e-mail at [email protected] within seven days of discovering the covered defect, and
(3) establish eligibility for service under this Limited Warranty directly with the Company and not with a retailer or distributor of the Product.
DO NOT CONTACT A RETAILER OR DISTRIBUTOR OF THE PRODUCT FOR REPAIR, REPLACEMENT OR REFUND under this Limited Warranty. Once eligibility for service under this Limited Warranty has been established by the Company, a Return Authorization Number will be issued and detailed shipping instructions provided.
DO NOT SHIP OR RETURN PRODUCT WITHOUT A RETURN AUTHO-RIZATION NUMBER. Products shipped without a Return Authorization Number will not be accepted for service under this Limited Warranty and will be returned to the Owner at the Owner’s expense.
INSTRUCTION MANUAL
GENERAL PROVISIONSPA PURE™ ELECTROLYTIC WATER PURIFIER
NO OTHER WARRANTIES
Potable Aqua™ PURE INSTRUCTION MANUAL 2120 Potable Aqua™ PURE INSTRUCTION MANUAL
THIS LIMITED WARRANTY IS COMPANY’S SOLE WARRANTY FOR THE PRODUCT AND IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. COMPANY DISCLAIMS AND EXCLUDES ALL OTHER EX-PRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED BY LAW INCLUDING, WITHOUT LIMITATION, THOSE IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
To the extent that applicable law prohibits the exclusion of implied warran ties, the duration of any applicable implied warranty is limited to the period specified for the express Limited Warranty stated above. Some states do not allow lim-itations on how long an implied warranty lasts, so the above limitation may not apply to Owner.
LIMITATIONS OF LIABILITYCOMPANY’S OBLIGATION TO REPAIR PRODUCTS, PROVIDE RE-PLACEMENT PRODUCTS OR TO REFUND THE PURCHASE PRICE, AT COMPANY’S OPTION, SHALL BE OWNER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND COMPANY’S SOLE AND EXCLUSIVE OBLIGATION. COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE PRODUCT, ITS USE OR PER-FORMANCE. COMPANY’S AGGREGATE LIABILITY WITH RESPECT TO ANY DEFECTIVE PRODUCT SHALL BE LIMITED TO THE AMOUNT PAID BY OWNER FOR SUCH PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to Owner. This Limited Warranty gives Owner specific legal rights, and Owner may also have other rights, which vary from state to state.
Any assistance Company provides to or procures for Owner outside the terms, limitations or exclusions of this Limited Warranty will not constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive this Limited Warranty. Any oral or written description of the Product is for the sole purpose of identifying it and shall not be construed as an express warranty. Whenever possible, each provision of this Limited Warranty shall be interpreted in such manner as to be effective and valid under applicable law, but if any provi-sion is held to be prohibited or invalid, such provision shall be ineffective only to the extent of such prohibition or invalidity, without invalidating the remainder of such provision or the other remaining provisions of this Limited Warranty.
PATENT PROTECTED H2gO® TECHNOLOGYPA PURE™ incorporates H2gO® technology patented in the USA with further U.S. and international patents pending. U.S. Patent Numbers: 6,261,464: 6,524,475; 6,736,966; 7,649,323; and 7,741,806
CONTACT USFor questions, troubleshooting, or help with your PA PURE™ Electrolytic Water Purifier device, please contact us:
Wisconsin Pharmacal Company, LLC
address: 1 Pharmacal Way • Jackson, WI 53037 USA website: www.potableaqua.com e-mail: [email protected] hours: 8:00 am – 4:30 pm CST Monday – Friday toll free: 800.558.6614 international: +1.262.677.4121 fax: 262.677.9006
INSTRUCTION MANUAL
GENERAL PROVISIONSPA PURE™ ELECTROLYTIC WATER PURIFIER
NO OTHER WARRANTIES
Potable Aqua™ PURE INSTRUCTION MANUAL 2120 Potable Aqua™ PURE INSTRUCTION MANUAL
THIS LIMITED WARRANTY IS COMPANY’S SOLE WARRANTY FOR THE PRODUCT AND IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. COMPANY DISCLAIMS AND EXCLUDES ALL OTHER EX-PRESS WARRANTIES, AND DISCLAIMS AND EXCLUDES ALL WARRANTIES IMPLIED BY LAW INCLUDING, WITHOUT LIMITATION, THOSE IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
To the extent that applicable law prohibits the exclusion of implied warran ties, the duration of any applicable implied warranty is limited to the period specified for the express Limited Warranty stated above. Some states do not allow lim-itations on how long an implied warranty lasts, so the above limitation may not apply to Owner.
LIMITATIONS OF LIABILITYCOMPANY’S OBLIGATION TO REPAIR PRODUCTS, PROVIDE RE-PLACEMENT PRODUCTS OR TO REFUND THE PURCHASE PRICE, AT COMPANY’S OPTION, SHALL BE OWNER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND COMPANY’S SOLE AND EXCLUSIVE OBLIGATION. COMPANY SHALL NOT BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE PRODUCT, ITS USE OR PER-FORMANCE. COMPANY’S AGGREGATE LIABILITY WITH RESPECT TO ANY DEFECTIVE PRODUCT SHALL BE LIMITED TO THE AMOUNT PAID BY OWNER FOR SUCH PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to Owner. This Limited Warranty gives Owner specific legal rights, and Owner may also have other rights, which vary from state to state.
Any assistance Company provides to or procures for Owner outside the terms, limitations or exclusions of this Limited Warranty will not constitute a waiver of such terms, limitations or exclusions, nor will such assistance extend or revive this Limited Warranty. Any oral or written description of the Product is for the sole purpose of identifying it and shall not be construed as an express warranty. Whenever possible, each provision of this Limited Warranty shall be interpreted in such manner as to be effective and valid under applicable law, but if any provi-sion is held to be prohibited or invalid, such provision shall be ineffective only to the extent of such prohibition or invalidity, without invalidating the remainder of such provision or the other remaining provisions of this Limited Warranty.
PATENT PROTECTED H2gO® TECHNOLOGYPA PURE™ incorporates H2gO® technology patented in the USA with further U.S. and international patents pending. U.S. Patent Numbers: 6,261,464: 6,524,475; 6,736,966; 7,649,323; and 7,741,806
CONTACT USFor questions, troubleshooting, or help with your PA PURE™ Electrolytic Water Purifier device, please contact us:
Wisconsin Pharmacal Company, LLC
address: 1 Pharmacal Way • Jackson, WI 53037 USA website: www.potableaqua.com e-mail: [email protected] hours: 8:00 am – 4:30 pm CST Monday – Friday toll free: 800.558.6614 international: +1.262.677.4121 fax: 262.677.9006
EPA EST. NO. 089216-WI-004 MODEL #PP2-02 H3061A ©2015