power supply for guitar effects · power supply for guitar effects ... this section is designed for...

1
Yankee Ps M2 Power Supply for guitar effects Ps M2 unquestionably the most electronicaly advanced power supply with the ability to power virtually every guitar effect available on the market. Ps M2 comes with: – 5 x 0,5m standard cable (5,5x2,1mm) – 5 x 0,25m standard cable (5,5x2,1mm) – 2 x 0,5m cable (5,5x2,5mm) – 1 x battery cable – 2 x mini‐jack cable – USB Lamp Ps M2 dimensions: – 55/134/102mm (height/width/depth) – weight: 1,5kg please visit us: www.yankee.net.pl contact: [email protected], Tomasz Jankowski tel. +48 601 811 254 PS-M2 offers 17 outputs split into five separate power sections. Sections one and two can power up to ten effects 9V DC. Each section outputs 1200 mA. Section three has 2 SAG-type outputs. Each output's power can be manually set and fine-tuned. This section is designed for effects in which the reduced voltage alters the sound output (similar to a battery close to dying out), such as analog overdrive pedals. Section four has two outputs. Each of them can be manually set to following voltages: output 1: 6V DC, 12V DC, 18V DC or 24V DC with maximum of 600mA output 2: 9V DC, 12V DC, 15V DC or 18V DC with maximum of 600mA Section five is made of two AC outputs (9V AC and 12V AC). Only one output can be used at a time. The section outputs 2000 mA. An addtional USB output (5V) can power an USB lamp (very useful on dark stages) or any USB powered device, such as portable media players NEW! Ps M2 is equipped with movable power socket ‐ it can be easily moved by the user. It can be placed on the top or on the back side of the unit! hand made in Poland Outputs Section I II III IV V 2 outputs 2 outputs 3 outputs 5 outputs 5 outputs Ps M2 outputs: Voltage 9V DC 9V DC 9V, 12V, 14V AC 2 x SAG 5‐10V DC Current 1200 mA 1200 mA 600 mA 2 x 600 mA 2000 mA Notes e.g. some of EHX, TC ELECTRONIC NDR-1, MXR etc. e.g. Digitech Whammy, Line 6 DL4, Stompbox, BOSS GT6, some of EHX etc. other effects: EXAR, MXR, Pete Cornish and many more. most popular way of powering effects: e.g BOSS, DUNLOP, KORG, IBANEZ etc. effects in which the reduced voltage alters the sound output, such as analog overdrive pedals. 1 x 6/12/18/24V DC 1 x 9/12/15/18V DC

Upload: others

Post on 19-Aug-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Power Supply for guitar effects · Power Supply for guitar effects ... This section is designed for effects in which the reduced voltage alters the sound output (similar to a battery

Yankee Ps M2

Power Supply for guitar effects

Ps M2 unquestionably the most electronicaly advanced power supply with the ability to power virtually every guitar effect available on the market.

Ps M2 comes with: – 5 x 0,5m standard cable (5,5x2,1mm) – 5 x 0,25m standard cable (5,5x2,1mm) – 2 x 0,5m cable (5,5x2,5mm) – 1 x battery cable – 2 x mini‐jack cable – USB Lamp

Ps M2 dimensions: – 55/134/102mm (height/width/depth) – weight: 1,5kg

please visit us: www.yankee.net.pl contact: [email protected], Tomasz Jankowski tel. +48 601 811 254

PS-M2 offers 17 outputs split into five separate power sections. Sections one and two can power up to ten effects 9V DC. Each section outputs 1200 mA.

Section three has 2 SAG-type outputs. Each output's power can be manually set and fine-tuned. This section is designed for effects in which the reduced voltage alters the sound output (similar to a battery close to dying out), such as analog overdrive pedals.

Section four has two outputs. Each of them can be manually set to following voltages:output 1: 6V DC, 12V DC, 18V DC or 24V DC with maximum of 600mAoutput 2: 9V DC, 12V DC, 15V DC or 18V DC with maximum of 600mA

Section five is made of two AC outputs (9V AC and 12V AC). Only one output can be used at a time. The section outputs 2000 mA. An addtional USB output (5V) can power an USB lamp (very useful on dark stages) or any USB powered device, such as portable media players

For distributors / re-sellers: We are very intrested in cooperating with you in your country. Please contact us to get more information (pricelists etc.) We would like to discuss it with you!

NEW! Ps M2 is equipped with movable power socket ‐ it can be easily moved by the user. It can be placed on the top or on the back side of the unit!

hand made in Poland

OutputsSection

I

II

III

IV

V 2 outputs

2 outputs

3 outputs

5 outputs

5 outputs

Ps M2 outputs:

Voltage

9V DC

9V DC

9V, 12V, 14V AC

2 x SAG 5‐10V DC

Current

1200 mA

1200 mA

600 mA

2 x 600 mA

2000 mA

Notes

e.g. some of EHX, TC ELECTRONIC NDR-1,MXR etc.

e.g. Digitech Whammy, Line 6 DL4, Stompbox,BOSS GT6, some of EHX etc.

other effects:EXAR, MXR, Pete Cornish and many more.

most popular way of powering effects:e.g BOSS, DUNLOP, KORG, IBANEZ etc.

effects in which the reduced voltage alters the sound output, such as analog overdrive pedals.

1 x 6/12/18/24V DC1 x 9/12/15/18V DC