powerride 3 pg1 - perfectpowersystems.com · powerride 3 three phase, 8 to 50kw o!ce buildings ¥...

PowerRide 3Three Phase, 8 to 50kW

office buildings • factories • warehouseshospitals • hotels • motels • schools • universitiesshopping centers • airports • casinos • supermarketsmilitary installations • apartment buildings train and bus terminals • houses of worship

HID, Incandescent, Fluorescent, LEDModular Design, Front Access, Small FootprintListed to UL924 Lighting and UL1778 UPS Standard, by CSA

PowerRide 3on-line //standy-by/fast transfer

The PowerRide 3 incorporates state of the art technology with PWM (Pulse Width Modulated), double conversion design for emergency lighting applications. When utility power fails, the Inverter provides uninterrupted output power to the emergency lighting circuits in compliance with UL924 Life Safety Code for 90 minutes of egress illumination.

STANDARD FEATURES

key features:Fast Transfer, Standby, and Double Conversion“no-break” online system are availableEfficiency: 94% Online / 98% Standby/Fast TransferAutomatic monthly and annual self-testingLatest technology microprocessor controlled electronics with PWM (Pulse Width Modulated) design for true Sine Wave outputContinuous self-diagnostic and self-testing system

LCD backlit panel for comprehensivemonitoring of power line conditions andinverter statusSealed maintenance-free lead calcium batteries with 10 year prorated warrantyModular cabinet design for ease of installation, small footprint with shallow 18” depth,convenient front access.Optional Battery Tracker Monitoring System2 Year Warranty*

14000 S BROADWAY, LOS ANGELES, CA 90061Tel: 800-786-6915

www.perfectpowersystems.com

The PowerRide 3 is the best design solution for emergency lighting power for a wide range of commercial and industrial applications.

Back-lit LCD Display for monitoringSystem pre-wired for optional Global Monitoring System (GMS)High Frequency PWM with Digital Signal Processing TechnologyMake Before Break Internal MaintenanceBypass SwitchMain Input andt Output Circuit BreakerGenerator Compatible with Automatic Governor (Slew Rate 2Hz/sec.)Inverter Test SwitchBattery BreakerBattery Management Software

Electronic Cabinet

*Second Year, months 13 to 24 only valid with factory performed preventive maintenance

715-DS-3-18

PowerRide 3TECHNICAL SPECIFICATIONS

Power Rating: 8, 12, 16, 20, 24, 32, 40 and 50 KW (higher capacity available)

Input Voltage: 208Y/120 or 480Y/277 VAC (-20% to +15%)Output Voltages: 208Y/120 or 480Y/277 VACOutput Frequency (Inverter Operation) : 60 Hz +0.5 HzVoltage Regulation: +3%, Regulated within CBEMA curveOutput Wave Form: Sine-Wave < 5% THD.Efficiency: 94% online / 98% standby / fast transfer (Typical)Power Factor: UnityCrest Factor: 3:1 TypicalSurge Protection: The inverter will protect itself and the load against

surges as defined in ANSI/IEEE C62.41 Cat. A & B.Isolation: Complete from line. Output neutral bonded to groundNoise Isolation: -120 dB Common-Mode; -60 dB Transverse-ModeBattery: 10 year pro rated maintenance-free (AGM) batteryRecharge Current: Conforms to UL StandardsExternal Battery: Provisions for hardwire connection of optional

external battery cabinets or DC source.Environmental:

Humidity: 0 - 95% RH w/ no condensationOperating Temp: UPS: 0˚ to 40˚C. (32˚-104˚F)

Battery: 20˚ to 25˚C. (68˚-77˚F)Storage Temp: -20˚ to 25˚C. (-4˚ - 77˚F)Altitude: Up to 10,000 ft

Safety Agencies: CUL, CSA Listed UL1778, UL924Cabinet Sizes :

Standard Cabinet Layout:Inverter cabinets 39"W x 68"H x 18"D Battery cabinets 51”W x 70”H x 30.5”D

Standard Battery Back-up time is 90 minutes @ full load. Other back-up times are available - contact factory.

KW INPUT - OUTPUT

Model Numbers

DCVolts

Total Weights (lbs)

InverterCab.

(Qty)Battery Cab.

8208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120

PD010B05LHT3-VAPD010H09LHT3-VAPD010H05LHT3-VA

192 (1 Cabinet)1083 lbs

39W x 68H x 18D(1 Cabinets) 1392 lbs

12208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120



51W x 70H x 30.5D(1 Cabinets) 3224 lbs

16208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120




20208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120




24208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120




32208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120




40208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120




50208Y/120 - 208Y/120480Y/277 - 480Y/277480Y/277 - 208Y/120

PD050B05LHT3PD050H09LHT3PD050H05LHT3



OPTIONS

Global Monitoring System (GMS)Provide SNMP MIB to monitor &log UPS statusAuto-sense 10M/100M FastEthernetManage & configure via Telnet, Web Browseror NMSSupport TCP/IP, UDP, SNMP, Telnet, SNTP,PPP, HTTP, SMTP ProtocolSending both of SNMP TRAP and Email forevents notification.Auto email daily Battery Backup historyreport (configurable)Basic NetAgent: LAN or WIFIAdvance NetAgent: LAN, WIFI, Dial-upModem, or GPRS Modem

Consult Factory for more features and choices of remote communication.Consult Factory for exact number of battery cabinets

* Total Weights are approximate.Specifications are subject to change without prior notification.

Secondary Auxiliary Circuit Breakers (up to 20one-pole OCB’s): Normally On, Normally Off,Normally Off w/ Delay, Trip AlarmAux CB with Trip IndicatorDry Contact: With Single Common N/O, N/Cwith individual isolated CommonSecondary Normally On/Off Terminal BlockselectionRemote Status Panel Unit with Audible Alarmwith Silence SwitchInput Current Harmonic Filter, 10% & 5% (Thisoption will not be offered with SecondaryAuxiliary Circuit Breakers)Make Before Break External Maintenance BypassSwitch (4 Pole)Main Input and/or Output Circuit Breaker (withcustom KAIC)Battery Cabinet Fan ExhaustBattery Cabinet Fan Exhaust with Dry ContactBattery Thermal Runaway with Dry ContactBattery to Normal power, adjustable Time DelayExternal Attachable Panelboard (42 poles)EMI FilterInput Transient Voltage Surge Suppressor (TVSS)Delta Input (using External Transformer)Harmonic Tolerance (up to K-50) Battery Tracker: Wireless Battery StatusMonitoring SystemCertified Zone 4 Seismic Bracket: Adds approx.4” of additional floor space to each side of cabinetExtended Warranty and Service PlansSpare Part Kits AvailableMonitoring via RS232 and RS485

715-DS-3-18

powerride 3 pg1 - perfectpowersystems.com · powerride 3 three phase, 8 to 50kw o!ce buildings ¥...

Documents