Historical and Vanguard

Finetornos® - Hernandes Fim & Cia. Ltda. Is a company of metallurgic sector

acting in the machining division and has established its activities at 1976.

Since the beginning of its activities, Finetornos supplies to

large-size corporations, multinational with competitive and

innovative features and sustainable growth

provided by technologies, machines

and development of trained workforce.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR

REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Historical and Vanguard

The main focus is the achievement of our clients

offering integrated engineering solutions, which add

value to the goals and objectives of the customers,

participating and following all the stages of product

design.

Finetornos® has a market oriented organization,

based on organizational culture and climate that is as

facilitators of this process, promoting and encouraging

the exchange of ideas between sectors, keeping the

internal policy, supported by fidelity acquired by the

good relationship with its suppliers.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Mission

“ ”“ To be a company that improve its concepts and features,

synchronized with the market and the acting of its customers,

which encourage the industrial technologic application, and is

aware of life quality and environment.”

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Quality Policy

“ Offer Competitive Products, with Quality,

Punctuality and continuous

Improvement. ““ ”THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED

WITHOUT WRITTEN CONSENT OF THE SAME.

Value Visions

• Integrity

• Social

• Learning

•Total Quality

• Partnership

• Uniqueness

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Objectives

“ Be a competitive and profitable company in our segments of operation, both

domestically and abroad, being a reference and option for our current

and future customers to be prospected. “

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Facilities and New Investments02 Vertical Machining Centers Mazak Nexus VCN 510-C II High Speed 15.000 RPM 4 Axis

02 Vertical Machining Centers Romi D 800 7.500 RPM 4 Axis

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Facilities and Structures

Offering machinery and equipment of last generation:

CNC CAD CAM 3D, Machining Centers 03 e 04 axis high speed, Centers of

turning machine , Processed by software CAD CAM 3D VISI, being this a

general system for the global market, providing converters DXF, IGES VDA

and STEP, with direct interfaces with leading

software industrial projects, including:

• CATIA

• PRO/E

• AUTOCAD DWG

• ACIS

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Facilities and Structures

Our company has a manufacturing structure, managed by modern

management systems and planning software integrated with ERP / MRP,

synchronized with control system processes and services and the planning

and production control, which uses the concept of sequencing in finite

capacity, fueled by collectors sector data by barcode.

Metrology complete Climatized and well equipped

with three-dimensional measuring machines, with

software measurement by comparison, offering a

portfolio of a modern coordinate measuring three-

dimensional Mitutuoyo machine model Crysta

BND - CC 9168 - CNC.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Structure and functional framework

Finetornos appreciates the low staff

turnover by encouraging individual efforts

to study and retraining, completing the

learning through internal and external

training. Promotes and encourages

people to achieve the objectives and

results of the company, encouraging the

challenges and responsibilities that

provide professional growth.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Business Segments

Aerospace: 75%

Automotive: 15%

Industrial: 10%

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Focus of Action

Finetornos is focused on 3D CAD CAM CNC

Milling Machining Centers 3 and 4 axis high

speed and centers of turning machine ,

focused on production and development of

parts of complex geometries in different

materials such as aluminum, steel, 4130,

4140 T & R, stainless steel, stainless 15-5

PH, stainless 13-8 PH-MO, titanium, Inconel,

non-ferrous alloys , thermoplastics and

nodular cast iron, forged steel castings,

nonferrous metals and alloys.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

We produce machined parts and

mechanical structural products such as:

Sleepers, panels, frames, supports,

linings, Reinforcements, Pin lock,

Platform, Hardware, Rails,

Connections, Support Joint-Actuator,

Bushings, Shafts, Spindles, Amendment Sector,

Ramp Guide, Rod, Stabilizer Tip, among many others.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

The aircraft parts produced by Finetornos

are applied in practically the whole aircraft,

such as:

• Drives

• Doors

• Entry Ramps

• Floors

• Wings

• Flaps

• Fuselage

• Main body of plane

• Landing Gear

• Stabilizers

• Seats

• Door components

• Supports Avionics

• Linings

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

We produce parts, assemblies and subassemblies for the aeronautical

sector, finished with treatments and coatings:

• Passivation

• Chromic Anodizing

• Chemical Conversion / Alodine

• Phosphating

• Laboratory

• Penetrant Liquid

• Painting

• Sulfuric Anodizing

Mounting subsets

• Driving / Sealing Flange Nut

• Mechanical Assembly

Inserts, Kneecaps, Bushings, Bearings

• Thermal

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace – IQ June 12

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace – IQ May 12

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Aerospace – IQ April 12

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Automotive / Industry

We operate in the production of low and medium

demand and in the development of prototypes, being

the prototype, the embryo to develop concepts of

current and new products, as well as an important

tool in the nationalization of parts and components.

We anticipate to our customers the studies and tests

of assembly and durability.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Automotive / Industry

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

OIL & GAS

Rotor

Turbines Blades

Automotive / Industry

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Subsea

Automotive / Industry

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Automotive / Industry

The differential of Finetornos is the reliability

and punctuality of the shorter term, linked to

the quality management system Finetornos,

ISO-9001 - version 2008 and ISO-9100-AS,

where from the 3D design of the customer,

we generate the design and programming 3D

CAD CAM development processes and tools,

materials, testing and metallographic

laboratory reports including innovation, in a

constant search for value and complete

solution to our client.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED

WITHOUT WRITTEN CONSENT OF THE SAME.

Automotive / Industry

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Automotive / Industry

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Innovations

3D Design

Casting Machined PartTHIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED

WITHOUT WRITTEN CONSENT OF THE SAME.

Innovations

Rapid Prototyping Stereolithography

Stereolithography model

Casting Machined PartTHIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED

WITHOUT WRITTEN CONSENT OF THE SAME.

Schedule of productive projects

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Main Customers

Oil and Gas

Automotive

Aeronautic

Energia

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.

Certificates

Finetornos ® is considered a synonym of quality due to the constant effort

in improvement of working techniques, to ensure complete solution and

overcoming the expectations of our supplies.

Operates with the quality management

system certified by BRTUV in

standards: ISO 9000, version 2008

and ISO-9100-AS (NBR15100) quality

management system aerospace.

THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.