FieldIT

Pressure transmitter 2600T Series

Pick the Performance that meets your Application: Accuracy: 0.04%, 0.075% or 0.15% with turndown ratios up to 100:1Communications: HART / 4-20 mA, PROFIBUS PA, FOUNDATION Fieldbus or MODBUSMeasurements: Gauge, Absolute, Differential, Level, Flow, Multi-Variable and Remote SealsApplications: Control Monitoring and Safety Shutdown (TV Approved for SIL2)

The solution that measures your demanding applications

AnalyzeIT Control IT Engineer IT FieldIT InformIT OperateIT PowerIT IndustrialIT

Horaciolynsa2

Our Experience Provides You the widest Choice of Solutions

The Performances You NeedChoose the performances mix that fits your needs foraccuracy, wetted materials, maximum workingpressure, fill fluids, remote seals and accessories.

The Communication You NeedChoose the communication standard that fits you needamong HART / 4-20 mA, PROFIBUS PA,FOUNDATION Fieldbus, and MODBUS. It only takesa few minutes to substitute the electronic module toupgrade to a different communication strategy.

The Solution Software You NeedChoose our 2600T Toolbox solution software tools tohelp solve your difficult flow, level, interface or remoteseal applications.This tool will help you build the optimal 2600T modelnumber based on your process conditions or convertan installed model number to the 2600T family.

The Application Solution You NeedChoose our Multivariable transmitter for your air, gasor steam mass flow applications or your multiply inputneeds. This transmitter has a variety of primary flowelements pre-configured. Choose our SIL 2 Certified Safety transmitter designedwith the necessary redundancy and self-diagnostics forthose critical safety shutdown applications.Choose the safety approval you need: intrinsicallysafe, explosion proof, FM factory sealed.

World Wide Support and Know-How You NeedOur international network of ABB companies,Authorized Representatives, Distributors and Agents,present in more than 100 countries are willing toprovide you with on-site field service, commissioningor application help.

The ABB 2600T unique pressure transmitters family isbuilt upon the experience of leading names like Bailey,Hartmann & Braun, Fisher & Porter, Schoppe andFaeser, Kent and Taylor. Therefore 2600T offers the widest choice of pressuretransmitters features available on the market.

Multisensor and Multivariable platformThis sensors measures both differential and absolute pressure.Additionally an external process temperature sensor (Pt 100) canbe added allowing : compensated flow and level calculations savings. By having three measured values on a single

transmitter coupled with the fieldbus technology increased process measurement accuracy. By evaluating and

compensating absolute pressure and sensor temperatureeffects.

Safety platformWith a natively redundant inductive sensing systemthis Hart configurable pressure transmitter can be usedin a SIL environment in compliance with ISA S84.01, IEC 61508 standard and the European PressureEquipment Directive (PED).All the necessary redundancy and diagnostics areimplemented: the redundant input signals are compared in the

microcontroller; the output section is checked by reading it back into

the microcontroller; full internal diagnostic (watch-dog timers, checksum

and a complete set of software checks performedevery 30 msec);

in case of a fault the analog output is driven to a safecondition in accordance to the NAMUR standard.

2600T Toolbox Software Solution

This tool will help you to build the optimal 2600T modelnumber based on your process conditions. The 2600TToolbox will interact with you to select the appropriatewetted parts, transmitter ranges, accuracy requirements,and options to provide the right product to meet yourapplication.

If you are replacing an existing installed transmitter witha 2600T, you need not worry because the 2600T Toolboxwill help you convert instrument to the optimal 2600Tmodel number.

The 2600T Toolbox also includes our TankMaster tool.TankMaster will automatically calculate the polynomialcoefficients that can be loaded into a 2600T transmitter tocalculate the filled volume of a curved tank (even with acomplex shape).

Choice of all-welded construction for vacuum applications orgasketed construction.

Non silicone based fill fluid specific for paints applications (carpainting and electro-coating).

Wide selection of diaphragm materials including anti-stick andanticorrosion.

Sanitary and aseptic process connections and fill fluids for Food andPharmaceuticals.

Interfaces level and density.

Tailored for Your application

Air, gas or steam flow measurement with absolute pressure andtemperature compensation.

Modbus communication available for natural gas flow measurementvia Remote Transmitting Unit (RTU).

High static (41 MPa, 410 bar, 6000 psi) working pressure option forpower plants, pipelines, or oil and gas production.

High vacuum (down to 0.067 kPa abs 0.01 psia) for vacuumdistillation column and evaporator.

Fast response time version for compressors and turbines.

Low-range (6 kPa, 60 mbar, 24 inH2O) for gauge or absolutepressure measuring applications.

Full metal sensor with high overpressures (90 MPa, 900 bar, 13000 psi) protection.

Open or closed tank application. Flush and extended diaphragms. Sanitary and aseptic process connections and fill fluids for Food and

Pharmaceuticals. Pulp & Paper process connections. Volume measurement capabilities (Tank strapping).

Multivariable

Differential Pressure

Pressure

Remote Seals

Level / Direct Mount Seals

All the flexibility you need

Housing Standard (Barrel) DIN Low copper Stainless Steel

Sensor Differential Pressure Gauge Absolute Level Multi-Variable

Display Analog Digital CoMeter Integral

Electronic HART / 4 to 20 mA PROFIBUS FOUNDATION Fieldbus MODBUS (Multi-Variable)

Fill Fluids Silicone oil Inert fluid Pharma/food grade High temperature

Process Connections Traditional Integral mount Remote seals

Materials Stainless Steel Monel Hastelloy Tantalum Gold Plated

Double-portBottom works

Single-portBottom works

Top works

Accessories manifolds flow primary elements

integral orifice wedge

flanges and pipe unions vent/drain valves integral surge protection

Additional ABB Services manifold and primary elements assembly special cleaning procedures calibration certificates materials certificates complete instrument configuration according to Your

specifications

Remote sealsRemote seals are used to isolate the 2600T transmitter fromprocess conditions that will either shorten the transmitters lifeor dramatically affect its performance. Conditions such as: temperatures down to -105 C, -157 F or up to 400C, 752 F. Measuring highly corrosive fluids. Or fluids that are highly viscous or have a tendency

to crystallize or solidify.For these process application requirements ABB hasavailable: Fill fluids design specially for high temperature

applications. Specific diaphragm materials to withstand these high

corrosion environments. ABB also has seals with anti-stickcoating for those highly viscous sticky applications.

A complete range of process connections like chemicaltees, wafer, flange mounting (flush or extended),threaded union, welded bushing, Pulp & Paper connections, easily cleanable sanitary and aseptic connections.

ABB is the leader in the all welded technologywhere the Remote Seal System are welded at everyjunction. This prevents air and contaminants fromentering the seal resulting in improve measurementaccuracy and reliability over traditional.

(*) Either HART, PROFIBUS or FF communication standards are supported

Zero / Span (by Snap Cal)

Calibration

Configuration

Diagnostics

Configuration upload/download

Configuration documentation

Push IntegralCoMeter

Hand-held SmartButtons display Terminal Vision (*)

FFPROFIBUS

HART

CoMeter

Integraldisplay

EthernetConfigurationABB offers a variety of 2600T Transmitterconfiguration options:

Software. ABBs Smart Vision or third partiesInstrument Engineering software for database configuration and/or Plant Maintenance.

Hand Held HART communicators.ABBs HT2691 and STT04 or any third partyHand Held Communicator with ABBs 2600T DD.

CoMeterTM. A local 2600T process indicatorand configuration tool. Local Hart configuration Programmable output meter

in engineering units.

Integral display. A cost effective full localconfiguration solution, even with closedcovers.

Snap-CalTM. Fully adjustable local dampingand zero and span adjustement.

GeminiConfigTM. The original configurationis maintained allowing the field replacement of the electronics as plug and play.

Security. Several security facility, includingpassword protection, prevent risks ofunwanted configuration changes.

Self-DiagnosticThe transmitter performs continuous self-checks and monitors the sensor temperature, static pressure etc. If a problem occurs, alarm status are indicated on the analog output in compliance with NAMUR standard or onthe optional integral LCD or Co-Meter display, or on the fieldbus status flags.

ABB Instrumentation spaVia Statale, 11322016 Lenno (CO)ItalyTel: +39 0344 58111Fax: +39 0344 56278

ABB Automation Products GmbHSchillerstrasse, 72D-32425 MindenGermanyTel: +49 (0) 571 8301494Fax: +49 (0) 571 8301470

ABB Inc.125 East County Line RoadWarminsterPA 18974USATel: +1 215 674 6000Fax: +1 215 674 7183

ABB Ltd.Howard Road, St. NeotsCambridgeshirePE19 3EUUKTel: +44 (0)1480 475321Fax: +44 (0)1480 217948

The Companys policy is one of continous improvement and the right is reserved to modify specifications without notice. ABB 2002

ABB has Sales & Customer Supportexpertise in over 100 countries worldwide

www.abb.com

PB

2600

T R

ev. 1

09.0

2