price bidshavells endura cityliner neo plus/ bajaj-edge series led street lighting led/phillips or...
TRANSCRIPT
Page 1 of 2
PRICE BIDS Sl
No Item Description UOM Quantity
1 Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C.
insulated single core unsheathed industrial (Multistrand) cable FR
conforming to IS-694: 1990 with flexible bright annealed electrolytic
copper conductor for voltage grade up to 1100 volts (Finolex /RR
Kabel /Nicco / Anchor or Equivalent Make as approved by the
Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG /
Precision/ Presto Plast/Polycab/ MW or equivalent make as approved
by the Deptt.) in surface system, including 6 Amp flush type switch/
bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or
equivalent make as approved by the Deptt.) GI/ MS switch board (ISI
marked) half conceal on wall with phenolic laminated sheet cover
,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or
equivalent make as approved by the Deptt.) etc. complete as directed
and specified by the Deptt.
Short point up to 3.00 metre. length. Each 20
2
Supplying including fitting fixing of following 5 star energy rating
A.C. Ceiling fan complete with all accessories like down rod, canopy
etc. of following sweeps with making necessary connection as
approved by the Deptt.)as required complete and as directed by the
Department [Without regulator].
Premium model 1200 mm Sweep (ORIENT /Havells/Bajaj make)
1200 mm Sweep . Each 54
3
Supplying including fitting fixing of following A.C. Exhaust fan in
the existing hole on the wall of following sweeps with making
necessary connection as approved by the Deptt.)as required complete
and as directed by the Department.
4 Power Flow 300 mm sweep (Crompton make/ORIENT
make/Bajaj/Havells) Each 16
5 Supplying fitting and fixing of ceiling fan regulator including
connections etc. complete as required.
Electronic Type type(bajaj/anchor) Each 54
Page 2 of 2
(Rate should be quoted in percentage below/above /at par basis on the Estimated amount of
Rs. 1,86,161.00)
Rate (in figure)
=………………………………………………………………………………………… Rate (In words) =……………………………………………................................................................. Name:-
Address:- Ph No:-
Page 1 of 6
Price Bid.
Name of Work: - Electrical repairing works in old life science (TAC) building, AUS
Estimated Cost – 4,14,920.00
Page 2 of 6
PRICE BID
Sl
No Item Description UOM Quantity
1
Supply and laying of following size PVC/XLPE insulated and PVC sheathed
1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded
conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour
(Aluminium for single core up to 70 sq mm balance Aluminium strip,
Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all
galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as
per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in
ground/partially in air (as required for termination over ground including
excavation of cable trench up to depth of 75cm, refilling, protective brick
covering, Sand cushioning etc complete handling of surplus spoil, debris et to
proper place as specified and directed by the deptt. As per site requirement and
directed erection of cable with required length of GI pipe for road cross along
with making good of the roads with CC works as required and complete .
RPG/Finolex/RR Kable make) .
35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable Metre 30
2
Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single
core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper conductor for voltage grade up
to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG /
Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) in surface system, including 6 Amp flush type switch/ bell push
(Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as
approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall
with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor
kany.Kom / Havells or equivalent make as approved by the Deptt.) etc.
complete as directed and specified by the Deptt.
Short point up to 3.00 metre. length.
Each 52
3
Supplying with fitting fixing of 48W 5700K LED street light fitting made in
die cast aluminium housing and IP66 protection impact resistance IK07 & 10
KV external SPD outdoor lighting luminaries complete with LED lamp for
unifrom distribution including supply & installation MS bend pipe size 50mm
dia oupto 1 meter length suitable for mounting street light fixture on MS pole/
extisting wall with required clamps, nuts and bolts complete as approved by the
Dept , making necessay connection as approved by deptt with 3X1.5 sq.mm
F.R multistrand and PVC insulated single core copper cable from loop/control
gear box to luminaries suitable for 48 Watt LED luminaries with all required
assesories as directed by department by deptt.(Make: 48W LED street light
Havells Endura Cityliner Neo Plus/ Bajaj-Edge series LED street lighting
LED/Phillips or equivalent; equivalent will be selected by the deptt
considering the mother item rate.- each 3
4
Supplying fitting & fixing of surface and wall mounted LED batten (18/20 W)
with polycarbonate housing & integrated
electronic driver, holders required for completing the installation & as directed
by deparment..(Make: Havells (Lumiline Lights)/Bajaj/Phillips/Jaguar(Sleek
LED batten lights) each 26
Page 3 of 6
5
Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed
industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible
bright annealed electrolytic copper conductor for voltage grade up to 1100 volts
(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the
Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or
equivalent make as approved by the Deptt.) including earth continuity in
surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART
- III rigid PVC conduit wiring system.
5.1
With 2 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping
system,
metre 100
5.2
With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI
marked casing 'n' capping system.
Metre. 120
5.3
With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm
ISI marked casing 'n' capping system.
Metre. 40
6
Wiring to 5 a pin 6 Amps plug point with 2.5sq. mm P.V.C. insulated single
core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper conductor for voltage grade up
to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI
marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/
Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T
switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent
make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with
phenolic laminated sheet cover including earth continuity with 1.5 sq. mm.
cable to third pin of the plug socket etc. as required complete, when placed
elsewhere.
Short point up to 3.00 metre. length. each 10
7
Supplying including fitting fixing of following 5 star energy rating A.C.
Ceiling fan complete with all accessories like down rod, canopy etc. of
following sweeps with making necessary connection as approved by the
Deptt.)as required complete and as directed by the Department [Without
regulator].
Premium model 1200 mm Sweep (ORIENT PSPO/Havells make) / Premium
model 1050 / 1200 mm Sweep SS-390 Deco Havells make) Each 20
8
Supplying including fitting fixing of following A.C. Exhaust fan in the
existing hole on the wall of following sweeps with making necessary
connection as approved by the Deptt.)as required complete and as directed by
the Department.
Power Flow 225 mm sweep (ORIENT make)
Each 3
Page 4 of 6
9
Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust
& vermin proof Double door IP-43 double door surface mounting vertical TPN
MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail
etc fitted on wall with grouting nuts & bolts as reqd. complete with making
necessary connection as approved, specified and directed by the deptt.
ABB, Schneider MG, legrand, Hager make)
8 way TPN (8+24) double door Each 1
10
Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of
the following capacity complete with making necessary connection as
approved, specified and directed by the deptt.
C Series
(Schneider MG, legrand, Hager make)
6 to 32A Each 20
11
Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the
following capacity complete with making necessary connection as approved,
specified and directed by the deptt.
C Series (ABB, Schneider MG, legrand, Hager make)
63A Each 2
12
Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the
following capacity complete with making necessary connection as approved,
specified and directed by the deptt.
C Series
(ABB, Schneider MG, legrand, Hager make)
40A Each 2
63A Each 1
13
Supply, installation & testing of G.I. Plate earth station with 600 mmx600
mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I.
watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50
mmx40 mm G.I. reducing socket for funnel including locking arrangement with
300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging
of earth pit, construction of brick chamber and plastering of both inner & outer
surface of wall as specified and directed by the deptt . Each 1
Page 5 of 6
14
Supplying & laying of 25x5 mm size G.I. strips drawn on surface from earth
electrode to Electrical switch gears, machineries etc complete with supply of
G.I. nuts & bolts, screws etc including riveting, soldering & making necessary
connection as approved, specified and directed by the deptt. Metre. 50
15 Supplying and string up of 3-ph 5 wire,AAAC Rabbit conductor in the existing
P.S.C./ M.S/ Galvanized pole with binding etc. as required and as directed by
the department. C.Km 320
16 Supplying and erection of L.T. stay set complete (Galvanize with 19mm dia
x1.8m long stay rod anchor plate of size 30cm x 30cm x 6.4 mm thimble stay
clamps tube buckle (19mmx 60c 7/14 SWG dia G.I stay and strain insulation
etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate
40mm nominal size foundation including excavation and refilling etc. as
required and as directed by the department. each 10
17 Supplying and fitting fixing of L.T.channel complete with clamps ,blots, nuts
etc. as required and as directed by the department. each 18
18 Supplying and erection of L.T. Pin insulators with G.I. pin complete with blots
and nuts coach screw etc. as required and as directed by the department. each 30
19 Supplying and erection of L.T. Shackle insulators with shackle strap complete
with blots and nuts coach screw etc. as required and as directed by the
department. each 20
20 Supplying and erection MS pole 8.5 metre long, the pole is to be erection in
1:2:3 plain cement concrete foundation of size 1.50 m x 0.45 m x 0.45m having
including edge brick soiling and plastering above G.L. portion (0.30 metre
complete with excavation of earth, handling of Surplus Soil, debris etc. to the
proper place and refilling etc. as specified and as directed by the department. each 5
21 Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single
core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990
with flexible bright annealed electrolytic copper conductor for voltage grade up
to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG /
Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) in surface system, including 6 Amp flush type switch/ bell push
(Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as
approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall
with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor
kany.Kom / Havells or equivalent make as approved by the Deptt.) etc.
complete as directed and specified by the Deptt.
Short point up to 3.00 metre. length.
each 15
Medium point up to 6.00 metre. Length.
each 35
22 Any other SOR item based on APWD SOR-13-14 LS-Rs.
5000/- 1
Page 6 of 6
(Rate should be quoted in percentage below/above /at par basis on the Estimated amount of
Rs. 4,14,920.00)
Rate (in figure)
=………………………………………………………………………………………… Rate (In words) =……………………………………………................................................................. Name:-
Address:- Ph No:-
Page 1 of 6
Price Bid.
Name of Work: - Electrical repairing works in old ecology (TAC) building, AUS
Estimated Cost – 2,61,259.00
Page 2 of 6
PRICE BIDS Sl
No Item Description UOM Quantity
1 Supply and laying of following size PVC/XLPE insulated and PVC
sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm
balance stranded conductor, XLPE Insulated, cores laid up, PVC tape
inner sheathed, Armour (Aluminium for single core up to 70 sq mm
balance Aluminium strip, Galvanised for cables up to 2x10 sq
mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) ,
extruded PVC Type ST2 sheathed, 650/1100V grade as per IS
7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in
ground/partially in air (as required for termination over ground
including excavation of cable trench up to depth of 75cm, refilling,
protective brick covering, Sand cushioning etc complete handling of
surplus spoil, debris et to proper place as specified and directed by the
deptt. As per site requirement and directed erection of cable with
required length of GI pipe for road cross along with making good of the
roads with CC works as required and complete . RPG/Finolex/RR
Kable make) .
35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable
Metre 30
2 Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated
single core unsheathed industrial (Multistrand) cable FR conforming to
IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel
/Nicco / Anchor or Equivalent Make as approved by the Deptt.) with
flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in
surface system, including 6 Amp flush type switch/ bell push (Anchor
Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as
approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal
on wall with phenolic laminated sheet cover ,ceiling rose
(Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as
approved by the Deptt.) etc. complete as directed and specified by the
Deptt.
Short point up to 3.00 metre. length.
Each 52
Page 3 of 6
3 Supplying with fitting fixing of 48W 5700K LED street light fitting
made in die cast aluminium housing and IP66 protection impact
resistance IK07 & 10 KV external SPD outdoor lighting luminaries
complete with LED lamp for uniform distribution including supply &
installation MS bend pipe size 50mm dia oupto 1 meter length suitable
for mounting street light fixture on MS pole/ existing wall with
required clamps, nuts and bolts complete as approved by the Dept ,
making necessay connection as approved by deptt with 3X1.5 sq.mm
F.R multistrand and PVC insulated single core copper cable from
loop/control gear box to luminaries suitable for 48 Watt LED
luminaries with all required assesories as directed by department by
deptt.(Make: 48W LED street light Havells Endura Cityliner Neo Plus/
Bajaj-Edge series LED street lighting LED/Phillips or equivalent;
equivalent will be selected by the deptt considering the mother item
rate.- each 3
4
Supplying fitting & fixing of surface and wall mounted LED batten
(18/20 W) with polycarbonate housing & integrated
electronic driver, holders required for completing the installation & as
directed by deparment..(Make: Havells (Lumiline
Lights)/Bajaj/Phillips/Jaguar(Sleek LED batten lights)
each 26
5 Wiring for drawing sub-main line with P.V.C. insulated single core
unsheathed industrial (Multistrand) cable FR conforming to IS-694:
1990 with flexible bright annealed electrolytic copper conductor for
voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or
Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/
AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as
approved by the Deptt.) including earth continuity in surface/ recessed
20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid
PVC conduit wiring system.
5.1 With 2 x 1.5 sq. mm. cable in flat 19 mm ISI marked casing 'n'
capping system,
metre 100
5.2 With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19
mm ISI marked casing 'n' capping system.
Metre. 120
5.3 With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat
19 mm ISI marked casing 'n' capping system. Metre. 40
Page 4 of 6
6
Wiring to 5 a pin 6 Amps plug point with 2.5sq. mm P.V.C. insulated
single core unsheathed industrial (Multistrand) cable FR conforming to
IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel
/Nicco / Anchor or Equivalent Make as approved by the Deptt.) in
surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART -
III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/
MW or equivalent make as approved by the Deptt.) wiring system
including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch
(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent
make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark
with phenolic laminated sheet cover including earth continuity with
1.5 sq. mm. cable to third pin of the plug socket etc. as required
complete, when placed elsewhere.
Short point up to 3.00 metre. length.
each 10
7
Supplying including fitting fixing of following 5 star energy rating
A.C. Ceiling fan complete with all accessories like down rod, canopy
etc. of following sweeps with making necessary connection as
approved by the Deptt.)as required complete and as directed by the
Department [Without regulator].
Premium model 1200 mm Sweep (ORIENT PSPO/Havells make) /
Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make) Each 20
8 Supplying including fitting fixing of following A.C. Exhaust fan in the
existing hole on the wall of following sweeps with making necessary
connection as approved by the Deptt.)as required complete and as
directed by the Department.
Power Flow 225 mm sweep (ORIENT make)
Each 3
9 Supplying with fitting and fixing sheet steel, phosphatised, powder
painted dust & vermin proof Double door IP-43 double door surface
mounting vertical TPN MCB DB incorporated with bas-bar 125A,
Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts
& bolts as reqd. complete with making necessary connection as
approved, specified and directed by the deptt.
ABB, Schneider MG, legrand, Hager make)
8 way TPN (8+24) double door
Each 1
Page 5 of 6
10 Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz
MCB of the following capacity complete with making necessary
connection as approved, specified and directed by the deptt.
C Series
(Schneider MG, legrand, Hager make)
6 to 32A Each 20
11 Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of
the following capacity complete with making necessary connection as
approved, specified and directed by the deptt.
C Series (ABB, Schneider MG, legrand, Hager make)
63A Each 2
12 Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of
the following capacity complete with making necessary connection as
approved, specified and directed by the deptt.
C Series
(ABB, Schneider MG, legrand, Hager make)
40A Each 2
63A Each 1
13
Supply, installation & testing of G.I. Plate earth station with 600
mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm
dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow,
nipple and 50 mmx40 mm G.I. reducing socket for funnel including
locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I.
cover plate complete with digging of earth pit, construction of brick
chamber and plastering of both inner & outer surface of wall as
specified and directed by the deptt .
Each 1
14 Supplying & laying of 25x5 mm size G.I. strips drawn on surface
from earth electrode to Electrical switch gears, machineries etc
complete with supply of G.I. nuts & bolts, screws etc including
riveting, soldering & making necessary connection as approved,
specified and directed by the deptt. Metre. 50
Page 6 of 6
15 Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated
single core unsheathed industrial (Multistrand) cable FR conforming to
IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel
/Nicco / Anchor or Equivalent Make as approved by the Deptt.) with
flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto
Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in
surface system, including 6 Amp flush type switch/ bell push (Anchor
Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as
approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal
on wall with phenolic laminated sheet cover ,ceiling rose
(Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as
approved by the Deptt.) etc. complete as directed and specified by the
Deptt.
Short point up to 3.00 metre. length.
each 15
Medium point up to 6.00 metre. Length.
each 35
16 Any other SOR item based on APWD SOR-13-14 LS-
Rs.5000/- 1
(Rate should be quoted in percentage below/above /at par basis on the Estimated amount of
Rs. 2,61,259.00)
Rate (in figure)
=………………………………………………………………………………………… Rate (In words) =……………………………………………................................................................. Name:-
Address:- Ph No:-