prijenosni 3d-sistem za mjerenje - 3d mjerenje - mjerenje
TRANSCRIPT
Inovativno CAD-mjerenjeInnovation CAD-Measurement
Mobile 3D-Measurement-System
Precizna izmjera projekata na terenui momentalna izrada 3D CAD nacrta Accurately measure on-site projects anddynamically create 3D CAD drawings
M bil 3D M t S t
Prijenosni 3D-sistem za mjerenje
Flexijet GmbHKrellstraße 10
32549 Bad Oeynhausen / GER
S +49 5731/18 660 60
@
Nacrt kupole krova u FlexiCAD softveru.
Drawing of a domed roof in the FlexiCAD software.
Sa Flexijet 3D
With Flexijet 3D, laser points are projected on site to verifythe dimension accuracy before beginning assembly.
Pharmacy showroom (top view)
CAD measurement of an external staircase (3D view)
Ekskluzivni zastupnik za EX YU | Distributor:
Studio element d.o.o.
S +38513738717 S +385 98 472900
@
www.3dmjerenje.com
Flexijet 3D is a new and revolutionary CAD
allrounders and specialists an optimal measure-
ment method.
and cost-saving measurements with Flexijet 3D.
Don‘t worry about faulty or inaccurate measure-
ments. You don‘t have to note anything – you can
see what you measure directly on your display.
Flexijet 3D is easy to handle in any situation.
Aids such as scaffolds or ladders are unnecessary.
Measuring curves, arches and less angulated
constructions are accomplished with speed and
accuracy.
Simultaneously, Flexijet 3D acts as a laser-pointer
to simplify installation work.
Što je Flexijet 3D?What is Flexijet 3D?
Flexijet 3D is a new and revolutionary CD
allrounders and specialists an optimal
ment method.
and cost-saving measurements with Fle
Don‘t worry about faulty or inaccurate
ments. You don‘t have to note anything
see what you measure directly on your
Flexijet 3D is easy to handle in any situD
Aids such as scaffolds or ladders are un
Measuring curves, arches and less ang
constructions are accomplished with s
accuracy.
Simultaneously, Flexijet 3D acts as a lasD
to simplify installation work.
Št j F
Flexijet 3D je nov i revolucionaran CAD sistem za
izmjeru koja štedi novac i vrijeme.
-
Flexijet 3D
drugom metodom.
Istovremeno Flexijet 3D -
Što je ? 3
What is Flexijet 3D?
Kome je namijenjen? 4 - 5
Who is Flexijet 3D suited to?
Prednosti u odnosu na konvencionalne metode mjerenja 5
Advantages to conventional measurement methods
oprema 6 - 7
Flexijet 3D hardware
FlexiCAD 2 software and interfaces
Special features
Scope of delivery
| Archetype view Flexijet 3D-nacrt | Measurement in FlexiCAD 2
3
Prednosti u odnosu na konvencionalne metode mjerenjaAdvantages to conventional measurement methods
Kome je namijenjen?Who is Flexijet 3D suited to?
Izvedite precizna CAD mjerenja u kratkom
vremenu u odnosu na konvencionalne metode
mjerenja.
Measurements can be undertaken by one
person.
Undertake measurements without restriction.
Measure 360º vertically and horizontally – even
perpendicular to the bottom.
Calculation of areas or spaces directly
after measuring the required points.
Creating templates can now be avoided.
Flexijet 3D pojednostavljuje kompleksna mjerenja.
djelatnosti:
Create precise CAD measurements in a fraction
of the time of conventional measurement tech-
niques.
i kompliciranih namještanja stalka
Easy to use without any detailed adjustment
of the tripod
Pogreške prilikom mjerenja i neizmjereni
detalji su sada povijest
Wrong and forgotten measurements or
transmission errors are history
kao AutoCAD ili na CNC strojeve
Ability to undertake further processing of
measured data in other software such as
AutoCAD or CNC machines.
Neposredna vizualizacija prostora na licu
mjesta prilikom mjerenja
Immediate on-site 3D visualisation as
measurements are performed.
Flexijet 3D
End users can be found in the planning, trade,
series manufacturing and industry sectors:
Dizajn interijera i opremanje
Interior design applications
Arhitekti i geodeti Architects andsurveyors
Staklari
Glass and storefrontconstruction
Klesari i zidariStone workers / masons
Inspektori i nadzorEvaluators Booth construction
BrodograditeljiShip interior work
i mnogi drugi
and many more
Furniture makers and carpenters
Staircase construction
Kuhinjski studio Site measurements forkitchen construction
Bravari i metalna industrija
Metal work
54
Izmjera na objektu Izrada CAD nacrta, provjera i prema potrebi ponovna izmjeraMeasurement on-site (e.g. construction area) Creation of CAD drawing, verification or new measurements as needed
1. Osoba 2. Osobe
6h 12h 18h 24h
Izmjera na objektu i izrada CAD nacrta na objektu Measurement on-site and creation of CAD-drawing on-site
Samo 1 osoba Potpun CAD nacrt kao ovaj: 6h Complete CAD-drawing like this:
Potrebno vrijeme za konvencionalnu CAD izmjeruTime requirement for conventional CAD-Measurement.
Usporedba sa Flexijet 3D.Compared to Flexijet 3D.
360°
2 3,51,2
= 9,8m³
?
aopremaFlexijet 3D hardware
Laserski daljinomjer -
profesionalni 3D
softver za mjerenje FlexiCAD 2.
Flexijet 3D
daljinskog uprav-
Motorizirano kretanje izvode motori
visokih performansi i dinamike.
pritiskom tipke na laptopu.
Integrirani senzor nagiba -
-
Shock senzor
Flexijet 3D consists of a Laser Distancemeter
mounted on a motorized rotatable device and
the professional 3D-measurement software
FlexiCAD 2.
An important feature of Flexijet 3D is that the
device can be moved to the target point, either
manually or by the remote controlled internal
motor.
Motorized movement to points is the result of
high-performance and high-dynamic engines.
The activation of measurements with Flexijet 3D
can be done with a touch sensor on the device,
with the remote control or by pressing a key
on your laptop.
example with a level or laser alignment,
is not necessary anymore with Flexijet 3D.
The integrated inclination sensor makes
sure that you can start immediately with your
measurements.
In the event the
device is acciden-
tally knocked during
measurements, an
integrated shock sensor
will detect any movement.
Flexijet 3D can be relocated on points measured
previously, so that you are able to continue your
measurements.
Thereby taking measurement from different
location is quite easy as well. Simply set up the
device on a different location or on a different
Flexijet 3D comes with a removable battery
that can be replaced without interruption to the
measurement process.
Average battery life is approximately 8 hours,
dependent on manual or motorised operation.
Remaining battery life is indicated visually in the
FlexiCAD 2 software.
Flexijet 3D
postavi na drugu lokaciju i nastavi se sa mjerenjem.
Flexijet 3D
FlexiCAD 2.
76
sa postoljem za
Rugged case with tray for notebook
Remote control
C
sa protukliznom površinom
Height adjustable support plate
Integrirani laserskidaljinomjer
integratedLaser Distancemeter
Senzor dodira za aktivaciju mjerenja
Touchsensor
Accumulator slot
j j
dj j
hHeight adjustable support plate
Rugged case withtray for notebook
Remote control
Inovativno CAD-mjerenjeInnovation CAD-Measurement
Uvoz / izvoz podataka: DWG / DXF / XML
3D software IGES & STEP via RhinoCAD
Drvene stepenice Compass, Treppenmeister,
Staircon, Heglmeier
Kamene stepenice Scala
Arhitektura IFC
AutoCAD TachyCAD
Stolarija SEMA
Arhitektura Autodesk REVIT
Graphisoft ArchiCAD
Tachymeter & Digitaliziranu ruku
p
aFlexiCAD 2 software and interfaces
-
izravno sa lica mjesta u CAD program.
Brojne funkcije su optimalizirane za što precizniju
izmjeriti ili dali su svi relevantni podaci uneseni.
mjesto izmjere!
Mjerni podaci mogu se izvesti – Exportirati u
Importirati podaci direktno u softver. Nadalje
nekoliko programa imaju direktnu podršku za
The FlexiCAD software provides a comfortable
and intuitive user interface. Experienced CAD
users become quickly familiar with the interface
The function of the software is the creation of
– directly from site into CAD. Numerous functions
have been optimized for precise measurements
-
urement, you can track the completion of your
blueprint and ensure that all relevant data has
been processed. All this before you leave the
measurement site!
The measurement data can be exported by one
of the many export interfaces and imported
directly into your software. Furthermore, several
programs support a direct integration of the
Flexijet hardware.
• intuitive use supported by an assistant
• polar tracking, object capture and hatches
•
•
for well ordered measurement information
• symbol libraries with electrical, sanitary and
kitchen symbols
• measurement of inaccessible points
• sounding of points and marking of heights
• import of Auto CAD blocks
• optional interface to CNC machine
98
Nacrt nakon izvoza u RhinoCAD Drawing after export to RhinoCAD
Flexijet 3Dprograma Sema za projektiranje drvenih konstrukcija.Flexijet 3D is completely integrated, for example thesoftware SEMA for wood construction.
•
•
•
•
•
•
•
•
•
a Opseg isporukeScope of deliverySpecial features
1110
Automatsko mjerenje | Automatic series of measurementsFlexijet 3D
naredne zadatke. Automatsko mjerenje podrazumijeva hori-
-
horizontalnom serijom izmjera.
D Flexijet 3D
measures automatically the form of the walls while you can
pursue other tasks. The automatic series of measurements include the horizontal, vertical and along the series
of measurement of arbitrary mapping. For example, the hull of a boat can be measured automatically with a
vertical series of measurements. A curved wall surface can also be measured with a horizontal series of measurements.
| Initiating the points of constructionFlexijet 3D
Let the arbitrary points out of the drawing be displayed by Flexijet 3D. Click
on a point of construction in CAD-System and Flexijet 3D will show you the
| Surface area scan
Draw or measure any arbitrary enclosed outline and create a hatched measure-
ment pattern. With the „surface area scan“ command, all the intersections of the
hatched pattern will be automatically measured with the various levels displayed
(an ideal feature for laminate and tile layers).
3D skeniranje | 3D scanningFlexijet 3D
a rectangular area and the number of points to be measured. Flexijet 3D will then digitise this area with
approx. 2,000 measurements per hour, thus creating point cloud data that can be used for external modelling
(eg. terrain model).
Spline explode primjer | Spline explode example
drugih.
When digitising a sink cut-out, initially calibrate several points of the
cut-out. Afterwards, overlay a Spline of the measured points so that
contour on the CNC can be perfectly manufactured. In doing so, the Spline is converted into line segments,
tangential curves or into a combination of both.
| Transferring benchmarksFlexijet 3D
Flexijet 3D
Calibrate an arbitrary level with Flexijet 3D. Then turn the device to the point in which the height measured
afore should be displayed. At the push of a button Flexijet 3D initiates the measurement of the height.
Flexijet 3D
• Flexijet 3D
Laserski daljinomjer
Measurement device Flexijet 3D with
integrated Laser Distancemeter•
Integrated inclination sensor
(no adjustment of the tripod)• Integrirani senzor pomaka
Integrated shock sensor
Flexijet 3D will be delivered in a robust case and
consists of:
•
Remote control for motor-driven movements• | Charging device•
•
High-quality case including support plate and
tray for notebook• FlexiCAD 2 licencu | FlexiCAD 2-license
Opseg isporuke | Scope of delivery