proceedings of the asme / vol. 8 / mechanics of solids ... · contents...
TRANSCRIPT
Proceedings of the ASME
International Mechanical Engineering
Congress and Exposition
-2011 -
VOLUME 8
Mechanics of Solids,Structures and Fluids
Vibration, Acoustics and
Wave Propagation
presented at
ASME 2011 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION
NOVEMBER 11-17, 2011
DENVER, COLORADO, USA
ASME
Three Park Avenue * New York, N.Y. 10016
CONTENTS
MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS
ADVANCED MATERIAL JOINING
IMECE2011-62061 1
A New Approach to Measure Strain During Friction Stir Welding Using VisioplasticityMohamadreza Nourani, Abbas S, Milani, and Spiro Yannacopoulos
IMECE2011-62577 9
Effect of Prelube, Surface Coating and Substrate Materials on Initial Strength of Adhesive
Joints Between Al Alloy and Steels
Fan Zhang, Hui-ping Wang, Christina Hicks, Blair E. Carlson, Xin Yang, and Qing Zhou
IMECE2011-63257 19
The Load Factor and Permanent Set at the Bearing Surfaces in Hollow CylindricalBolted Joints Under External Axial Loads
Yukio Morozumi, Masahiko Okumura, Toshiyuki Sawa, and Kengo Kuwaki
IMECE2011-63498 27
Characterization of Adhesive-Bonded Sheet Metal Joints
Cuifen Yan, Xin Wu, and Sayed Nassar
IMECE2011-65280 37
The Effect of Microstructural and Geometrical Features on Fatigue Performance in
Mg AZ31 Friction Stir Spot Welds
J. B. Jordon
COMPOSITE MATERIALS FOR RENEWABLE ENERGY SYSTEMS
IMECE2011-62768 47
Evaluating Performance of Composite Materials for MHK ApplicationsDavid A. Miller, John F. Mandell, and Daniel D. Samborsky
IMECE2011-62326 53
Hydrogen Induced Fracture Near the Surface
L. N. Germanovich and A. V. Balueva
IMECE2011-63117 61
The Rate (Time)-Dependent Mechanical Behavior of the PMR-15 Thermoset Polymer at
Temperatures in the 274-316°C Range: Experiments and ModelingC. E. C. Rytherand M. B. Ruggles-Wrenn
vii
1MECE2011-64552 71
Fatigue Behavior of Natural Fiber Reinforced Thermoplastic Composites in Dry and
Wet Environments
Ahmed Fotouh and John Wolodko
GREEN AND BIOCOMPATIBLE NANOCOMPOSITE
IMECE2011-64119 79
Biocompatible Nanocomposite for Lab-on-a-Chip ApplicationNazmul Islam, Davood Askari, and Tarek Trad
HIGH STRAIN-RATE PHENOMENA: MODELING AND EXPERIMENT
IMECE2011-62139 83
Determination of Ballistic Limits of GLARE 5 Fiber-Metal Laminates: The Influences of
Geometry, Thickness and Stacking SequenceA. Seyed Yaghoubi and B. Liaw
IMECE2011-62444 91
Residual Stress and Wave Reflectivity When Laser Peening Thin Curved Sections
Arif Malik, Xiaopeng Lai, and Kristina Langer
IMECE2011-63141 101
Characterization of a Ferritic Stainless Sheet Steel in Simple Shear and Uniaxial Tension at
Different Strain Rates
Matti Isakov, Jeremy Seidt, Kauko Ostman, Amos Gilat, and Veli-Tapani Kuokkala
IMECE2011-63179 111
Finite Deformation Elastoplasticity for Rate and Temperature Dependent
Polycrystalline Metals
Richard A. Regueiro, Douglas J. Bammann, Esteban B. Marin, and George C. Johnson
IMECE2011-63352 125
Structural Response of Thin-Walled Austenitic Pipes to Internal Gaseous
Detonation LoadingStefan Offermanns, Eberhard Roos, and Werner Stadtmuller
IMECE2011-63625 135
Temperature Effect on Ballistic Impact of Hybrid Woven CompositesYougashwar Budhoo, Benjamin Liaw, and Feridun Delate
IMECE2011-63883 147
Quasi-Static and Dynamic Characterization of Oil-Based Modeling Clay and Numerical
Simulation of Drop-Impact Test
C. Hernandez, A. Maranon, I. A. Ashcroft, and J. P. Casas-Rodriguez
IMECE2011-64006 153
Development of a Time-Resolved Catadioptric Stereo Digital Image Correlation Techniquefor the Study of Blast Loading of Composite Material Structures
Douglas Jahnke and Yiannis Andreopoulos
IMECE2011-64414 , 163
Blast Resistant Elastomeric Polymer-by-DesignKristin L. Schaaf and Sia Nemat-Nasser
IMECE2011-65694 165
Flexural Toughness as an Attribute for Impact Damage Evaluation of Composite Laminates
Mohammad Alemi-Ardakani, Abbas S. Milani, Spiro Yannacopoulos,David Trudel-Boucher, and Golnaz Shokouhi
IMECE2011-65763 173
Experimental Verification of Model Pressurized Thick-Walled Cylinder With Numerical and
Theoretical Methods
Sunilbhai P. Macwan, Zhong Hu, and Fereidoon Delfanian
MATERIALS AND META-MATERIALS AT VARYING LENGTH SCALES AND
FREQUENCY RANGES
IMECE2011-64254 179
An Isotropic Auxetic Structural Network With Limited Shear Stiffness
Alessandro Spadoni
IMECE2011-64572 189
Investigation of Layered and Periodic Pattern Material Structures for Automotive
Vibro-Acoustic Abatement
Mohammad Al-Zubi, Emmanuel Ayorinde, Gary Witus, and Akif Dundar
IMECE2011-65509 199
Hydrophobicity of Hierarchical Structured Super-Hydrophobic Surfaces With
Trie-Secondary Pillars: A Lattice Boltzmann Method With High-Density Ratio
Jung Shin Lee, Yong Hyun Kim, Won Jae Choi, and Joon Sang Lee
MECHANICS IN BIOLOGY AND MEDICINE
IMECE2011-62133 207
Two-Component Coarse-Grain Model for Erythrocyte Membrane
George Lykotrafitis and He Li
IMECE2011-62143 213
Modulation of BCAM/Lu and ICAM-4 Expression on Red Blood Cell Membranes in
Physiological Stress Conditions
Jamie L. Maciaszek, Biree Andemariam, and George Lykotrafitis
ix
IMECE2011-63156 217
Non-Linear Viscoelastic Mechanics of Native and Engineered Ligaments and Tendons
Jinjin Ma and Ellen M. Arruda
IMECE2011-63843 219
Traction Forces During Cell Migration Predicted by the Multiphysics Model
Sangyoon J. Han and Nathan J. Sniadecki
IMECE2011-64361 229
Modeling of Impact Response of Composite Graded Structure
M. Alt, J. Hoffman, J. Clark, and S. Takak
MECHANICS OF COMPOSITE STRUCTURES AND
HEALTH MONITORING SENSORS
IMECE2011-62421 239
Assessment of Fracture Behavior of Flat Braided CFRP Composites Under Tensile LoadingWith Assistance of SQUID TechniqueMohamed S. Aly-Hassan, Yuka Takai, Asami Nakai, Hiroyuki Hamada, Yohei Shinyama,
Yoshimi Hatsukade, and Saburo Tanaka
IMECE2011-62507 245
Bearing Strength Analysis of Pin-Loaded Elliptical Holes in Laminated Composite Joints
O. Aluko and H. A. Whitworth
IMECE2011-62630 253
Fatigue and Fracture Performance of Insulation System in LNG Carriers
Myung Hyun Kim, Hyeon Su Kim, Jae Myung Lee, Min Sung Chun, Yang Do Kim, and
Nam Hyun Kang
IMECE2011-63631 263
Characterizing Tensile Strength Properties in an E-Glass Composite With Fiber Waviness
Cory Kendall and Greg R. Doud
IMECE2011-63882 273
Acoustic Emission Test on Steel/Composite and Steel/Composite/Steel Built-Up Sections
Rushie Ghimire, Gary Anderson, and Fereidoon Delfanian
MODELING AND EXPERIMENTS IN NANOMECHANICS AND
NANOMATERIALS
IMECE2011-63478 283
Applicability of Continuum Fracture Mechanics in Atomistic SystemsShao-Huan Cheng and C. T. Sun
MULTIFUNCTIONAL AND NANOSTRUCTURED MATERIALS:
MODELING AND CHARACTERIZATION
IMECE2011-62842 289
Electrical and Crack Responses of CNT-Based Polymer Composites Under Tension
Yu Kuronuma, Yasuhide Shindo, Tomo Takeda, Fumio Narita, and Shao-Yun Fu
IMECE2011-63731 291
Light Activated Shape Memory Polymers: Some Inhomogeneous Deformation ExamplesJaskirat S. Sodhi and I. Joga Rao
IMECE2011-65783 297
Multiscale Modeling of Random Lattices: Critical Issues on Continuum ApproximationHaifeng Zhao and Gregory J, Rodin
IMECE2011-65787 299
On Extension of Boundary Algebraic Equations to Irregular Lattices
Haifeng Zhao and Gregory J. Rodin
IMECE2011-65977 303
A Comparative Experimental Study on Tensile Properties of Three Types of
High-Performance Polymer Fibers
X.-L. Gao, S.-S. Zhou, S. E. Bosselman, and J. Q. Zheng
MULTIPHYSICS SIMULATIONS AND EXPERIMENTS FOR SOLIDS
IMECE2011-62114 311
Numerical Simulation for Mechanical Behavior of U10Mo Monolithic Miniplates for
Research and Test Reactors
Hakan Ozaltun, Herman Shen, and Pavel Medvedev
IMECE2011-64626 327
Quality Factors of Crystalline Semiconductor Nanocomposite Resonators
Puroorava Chakravarthy and Gang Li
IMECE2011-64685-
333
Modeling of Microstructures Actuation by the Knudsen Thermal Force
Sruti Chigullapalli and Alina Alexeenko
MULTISCALE COMPUTATIONS IN FLUIDS,STRUCTURES AND MATERIALS
IMECE2011-63427 341
Fluid Dynamics Around a Dimpled Pin-Fin
R. K. Nagar, J. P. Meyer, Md. Mahbub Aiam, and G. Spedding
IMECE2011-64063 351
Design and Validate a Particulate Matter Management System ComputationallyYoosef Peymani F., Arash S. Ghanbari, Yucheng Liu, and Asad Hayatdavoudi
xi
IMECE2011-65021 361
Multifield Analysis of a Piezoelectric Valveless Micropump
Ersin Sayar and Bakhtier Farouk
MULTISCALE DAMAGE AND FAILURE IN ENGINEERING MATERIALS
IMECE2011-62025 371
A New Extreme-Value Probabilistic Framework for Predicting Fatigue Crack Initiation Life
of Notched ComponentsGbadebo Owolabi and Horace Whitworth
IMECE2011 -62247 381
Evolution of Mechanical Properties and Microstructural Characterization of Aluminum
AA-6061 Butt-Welded Joints
Ajay A. Kardak and M. A. Wahab
IMECE2011-62815 389
Fracture Behavior of Long Glass Fiber Reinforced PP Sheets With Hole
Hiroshi Sakai, Smith Thittithanasarn, Putinun Uawongsuwan, Yuqiu Yang, and
Hiroyuki Hamada
IMECE2011-63182 395
Studies of the Effect of Heat Treatment on Hardness and Creep Behavior of a
Modified 9Cr-1Mo Steel
Z Wuthrich, T. Shrestha, I. Chant, K. Rink, M. Basirat, and G. P. Potirniche
IMECE2011-64344 403
Anisotropic Ductile Fracture of AA6260-T6 Al-Alloy Extrusions
M. Luo, T. Wierzbicki, and D. Mohr
IMECE2011-64914 413
Fracture Strength of Laser Etched Glass
Joshua D. Browne and Ronald A. L. Rorrer
IMECE2011-64954 419
Phase Transitions of Granular Systems: Between Brazilian Nut Effect and its
Reversed Mode
Zi'ang Xie, Ping Wu, Shiping Zhang, Chao Jia, and Weili Wang
IMECE2011-65196 425
Influence of Strain Rate and Stress State on the Mechanical Behavior of Die-CastingAM60 Magnesium Alloy
Gongyao Gu, Shaoting Lin, Yan Meng, Yong Xia, and Cling Zhou
IMECE2011-65325 435
A Microstructure-Based Model for Superplastic Deformation and Damage in
Magnesium AlloysHesamaldin Askari, Hao Lu, Hussein Zbib, Mohammed Khaleel, and Ghassan Kridli
IMECE2011-65515, 437
Dynamic Brittle Fracture Captured With PeridynamicsYoun D. Ha and Florin Bobaru
MULTISCALE MECHANICS OF COMPOSITES WITH COUPLED
MECHANICAL AND NONMECHANICAL BEHAVIORS
IMECE2011-62331 443
Evaluating the Mechanical Properties of 3D Woven Carbon-Epoxy Composite Materials
Using Experimental Data and FEA Methods
Mahdi Farahikia, Sunilbhai Macwan, Fereidoon Delfanian, and Zhong Hu
IMECE2011-62725, 451
Field Coupling and Stress Mitigation in Electrically Conductive CompositesA Barakati and 0.1. Zhupanska
IMECE2011 -62820 461
Notched Strength and Fractures Behavior of Chopped Glass Mat Reinforced
Unsaturated Plastics
Ryuiti Nishida, Ying Yu, Yuqiu Yang, and Hiroyuki Hamada
IMECE2011 -63899 467
Passive Control of a Wind Turbine Blade Using Composite Material
SaadAziz, John Gale, Arya Ebrahimpour, and Marco P. Schoen
IMECE2011-65318 477
Analysis of the Extension-Twist Coupling in Hygrothermally Stable Star Beam CompositesSean Muder, Robert Haynes, and Erian Armanios
MULTISCALE MODELING OF DAMAGE AND
FAILURE MECHANICS SYMPOSIUM IN HONOR OF
PROF. DOUGLAS J. BAMMANN'S 60th BIRTHDAY
IMECE2011-62707 483
Stress Analysis of Functionally Graded Thick-Cylinders Subjected to Mechanical and
Thermal Loads
Jasem A. Ahmed and M. A. Wahab
IMECE2011-64380 491
Configuration Optimization of Cross Wave Primary Surface Sheet in the Recuperator UsingParticle Swarm Algorithm
T. Ma, Y. T. Chen, D. J. Zhang, Y. P. Ji, M. Zeng, and Q. W. Wang
xiii
IMECE2011-65387 497
Unified Creep Plasticity Damage (UCPD) Model for Solder
Michael Neilsen and Paul Vianco
IMECE2011-65935 505
Localization Effects in Bammann-Chiesa-Johnson Metals With Damage Derealization
Koffi Enakoutsa, Fazle R. Ahad, Kiran N. Solanki, Yustianto Tjiptowidjojo, and
Douglas J. Bammann
NAIMOCOMPOSITES
IMECE2011-62685 517
Electrical Conductivity and Elastic Properties of Carbon Nanotube Reinforced
Polycarbonate NanocompositesYves Ngabonziza and Jackie Li
IMECE2011-63143 523
Effect of Nanosized Filler on Matrix Dominated Properties of Fiber Reinforced EpoxyYuanxin Zhou and Jeelani Shaik
IMECE2011-64191 527
Manufacturing and Flexure Properties Characterization of Hybrid Nano-/Micro-Fiber
Reinforced Epoxy CompositesBipul Barua and Mrinal C. Saha
IMECE2011-64283 533
Inter-Laminar Mechanical Properties Improvements in Carbon Nanotubes Reinforced
Laminated NanocompositesDavood Askari and Mehrdad N. Ghasemi-Nejhad
IMECE2011-64746 539
Development of Energy Absorbing Laminated Fiberglass Composites UsingElectrospun Glass Nanofibers
Evan Kimbro and Ajit D. Kelkar
NOVEL APPROACHES IN HETEROGENEOUS MATERIALS ANALYSIS
IMECE2011-63190 547
An Explicit Integration Method for Analysis of Wave Propagation in
Heterogeneous Materials
K. C. Park, S. J. Lim, and H. Huh
IMECE2011-64121 557
Blast Loading on Sandwich Structures: A Critical Assessment
Serge Abrate
IMECE2011-64236 567
A Nonlocal Approach to Modeling Crack Nucleation in AA 7075-T651
David J. Littlewood
IMECE2011-65507, , 577
Modeling the Transition From Conventional to Auxetic Behavior in Compressed Foams
J. C. Matheny and L M. Berhan
IMECE2011-65698 583
Multi-Objective Optimization of Functionally Graded Hollow CylindersM. Nabian and M. T. Ahmadian
SIZE SCALE EFFECTS IN MICRO/NANO STRUCTURED MATERIALS AND
COMPOSITES
IMECE2011-63507 591
A Size-Dependent Beam Element Based on the Modified Couple Stress TheoryM. H. Kahrobaiyan, M. Khajehpour, and M. T. Ahmadian
STRUCTURE-PROPERTY RELATIONSHIPS OF
POLYMERS AND COMPOSITES
IMECE2011-63591 599
Influence of Injection Molding Parameters on Mechanical Properties of Low DensityPolyethylene Filled With Multiwalled Carbon Nanotubes
Catalin Fetecau, Felicia Stan, Daniel Dobrea, and Dan Catalin Birsan
SYMPOSIUM ON MECHANICS OF SOFT MATERIALS
IMECE2011-63055 607
Tailoring Thermal Properties of Hybrid Glass Fibers/Carbon Fibers Reinforced
Polymeric CompositesDana Luca-Motoc, Petru A. Pop, Santiago Ferrandiz Bou, and Nicolae Dadirlat
IMECE2011-63131 613
Effect of Clay on Tensile, Flex and Fatigue Behavior of Carbon Fiber Reinforced EpoxyYuanxin Zhou, Mahesh Hosur, Zainuddin Shaik, and Jeelani Shaik
IMECE2011-64193- 619
Nonlinear Flexural Modeling for Epoxy Resin Materials
Masoud Yekani Fard, Yingtao Liu, and Aditi Chattopadhyay
VIRTUAL TESTING OF COMPOSITE MATERIALS
IMECE2011-63019 627
Simulation of Post Failure Response in Fiber CompositesBadrinath Veluri and Henrik Myhre Jensen
xv
IMECE2011-65289 635
Quantifying Thermal Transport of High-Temperature Ceramics From First
Principle CalculationsBabak Kouchmeshky and Peter Kroll
IMECE2011-65299 641
Optimized Design of Composite Materials for Heat Transport ApplicationsBabak Kouchmeshky, Peter Kroll, and Ibukun Olubanjo
VIBRATION, ACOUSTICS AND WAVE PROPAGATION
ACOUSTIC WAVE PROPAGATION IN POROUS MEDIA
IMECE2011-62861 647
Analysis of Thermal-Mechanical Coupling and Thermal Wave Penetration Depth for
Thermo-Acoustic Emission
Hanping Hu and Yandong Wang
IMECE2011-63646 657
Advanced Procedure Used for Determination the Absorption Coefficient of
Sonic-Absorbent Materials
Petru A. Pop, Patricia A. Ungur, Liviu Lazar, and Florin M. Marcu
IMECE2011-65876 665
Modeling the Vibroacoustics Response of Structures With Attached Noise
Control Materials
Noureddine Atalla and Dilal Rhazi
ACTIVE/PASSIVE NOISE CONTROL
IMECE2011-62392 673
A Design Approach for Improving the Vibroacoustic Characteristics of Plate Structures
Nabeel T, Alshabatat and Koorosh Naghshineh
IMECE2011-62533 683
Development of a Practical Broadband Active Vibration Control SystemNoah H. Schiller, Daniel F. Perey, and Randolph H. Cabell
IMECE2011-63028 691
Optimal Control of Clamped-Free Conical Shell Using Diagonal PiezoelectricSensor and Actuator
H. Li, Z B. Chen, S. D. HU, and H. S. Tzou
IMECE2011-63411 699
Natural Frequency Improvement of a Suspended FGM BridgeM. Hadipour, M. T, Ahmadian, S. G. Lashkari, and A. Barari
IMECE2011-63925 705
Comparison Study of Active Noise Cancelation Algorithms for Impulsive Noise
Peng Li and Xun Yu
NOISE, VIBRATION AND RELIABILITY IN VEHICLE SYSTEMS
IMECE2011-62084 711
A Study of Squeal Noise in Vehicle Brake SystemXu Wang, Sabu John, and He Ren
IMECE2011-62358 717
Numerical Simulation of Truck Transportation
Enayat Mahajerin and Gary J. Burgess
IMECE2011-62426 721
The Optimization of Vibration Induced by a V6 Engine Cooling Module
Ji Yang, Zhiyong Hao, Ruwei Ge, Liansheng Wang, and Kang Zheng
IMECE2011-62642 729
Dimensional Analysis for Bus Dynamic Performance Evaluation
A. Gauchia, E. Olmeda Santamaria, M. J. L Boada, B. L. Boada, and V. Diaz
IMECE2011-63017 737
Analysis of Two-Dimensional Bending Vibration of an Internal Combustion Engine'sShafting System Based on Wave EquationXingyu Liang, Kang Yang, Gequn Shu, Yuesen Wang, Linlin Tan, and Yonghui Wen
IMECE2011-63274 745
Fluid Induced Vibration in the Liquid-Filled Hydraulic Circuit of Passive Interconnected
SuspensionsJing Zhao, Nong Zhang, and Jinchen Ji
IWIECE2011-63367 753
Modeling Tire Tread Block Dynamics by a Timoshenko Beam Model
Stefan Ripka, Martin Zimmermann, and Jorg Wallaschek
IMECE2011-63392 763
Characterization of the Noise Emissions of a Passenger Vehicle
Jose Luis San Roman, Vicente Diaz, Pedro Cobo, Carolina Aivarez-Caldas,
Jose Antonio Calvo, Daniel Garcia-Pozuelo, Antonio Gauchia, David Ibarra,
Ester Olmeda Santamaria, and Alejandro Quesada
1MECE2011-65345 773
Analysis of Sound Attenuation in Elliptical Chamber Mufflers by Using Green's Functions
Subhabrata Banerjee and Anthony M. Jacobi
xvii
SYMPOSIUM ON NUMERICAL METHODS IN VIBRATION AND ACOUSTICS
IMECE2011-62096 779
Prediction Capabilities of Damped Updated Finite Element Models
Vikas Arora
IMECE2011-62269 787
Free Vibration Analysis of Rotating Laminated Composite Panels Using Finite Strip Method
With Modified Shape Functions
Mohammad Homayoun Sadr, Hadi Ghashochi Bargh, Mostafa Khorram Nejadi, and
Hoofar Pourzand
IMECE2011-62286 795
Percentiles of von Mises Stress From Combined Random Vibration and Static Loading by
Approximate Noncentral Chi Square Distribution
Patrick A. Tibbits
IMECE2011-62346 805
Optimum Vibration Design of Fiber Metal Laminated Panels by Particle Swarm
Optimization AlgorithmMohammad Homayoun Sadr, Hadi Ghashochi Bargh, Hoofar Pourzand, and
Masoud Karimi
IMECE2011-62461 813
Modal Bifurcation in Integrally Bladed Rotors
Rana Noman Mubarak and Jen-Yuan (James) Chang
IMECE2011-62649 821
Torsional Wave Dispersion in a Pre-Strained Hollow Sandwich Cylinder With Soft Core
S. D. Akbarov, T. Kepceler, and M. Mert Egilmez
IMECE2011-62886 831
On the Dispersion of the Axisymmetric Longitudinal Waves in the Pre-Strained Bi-LayeredHollow Cylinder Under Imperfect Contact Between the Layers
S. D. Akbarov and C. Ipek
IMECE2011-63018 839
Industrial Applications of a System for Chatter Stability Prediction and MonitoringK. B, Lu, M. Q. Jing, Y. Q. Zhang, and H. Liu
IMECE2011-63030 847
A Diagonal Piezoelectric Energy Harvester on Clamped-Free Conical Shells
H. Li, S. D. Hu, and H. S. Tzou
IMECE2011-63037 855
Modal Energy Transduction of a Cylindrical Shell Laminated With a SegmentedPiezoelectric Layer
X. Li, K. C. Chuang, H. Li, and H. S. Tzou
v\/i i i
IMECE2011-63218 863
Investigation on Blade Flutter in Transonic Compressor With a CoupledNumerical ApproachMingming Zhang, Anping Hou, Sheng Zhou, and Xiaodong Yang
IMECE2011-63296 871
Transmission Error in Synchronous Belt With Resonance Under Installation Tension
Masanori Kagotani and Hiroyuki Ueda
IMECE2011-63542 881
Simulations of Power Transfer Through Water via Piezoelectric Transducers
K. R. Wilt, L J. Radziemski, and H. A. Scarton
IMECE2011-63708 891
Uncertainty Analysis of Structural Dynamics by Using Two-Level Gaussian Processes
Z. Xia and J. Tang
IMECE2011-64033 899
Wave Propagation in One-Dimensiona! Structure of Periodic Inelasticity CompositesHelio Aparecido Navarro and Meire Pereira de Souza Braun
1MECE2011-65027 909
Experimental and Numerical Characterization of an Orifice Type Cryogenic Pulse
Tube RefrigeratorDion Savio Antao and Bakhtier Farouk
SYMPOSIUM ON PHONONIC CRYSTALS AND
ACOUSTIC METAMATERIALS
IMECE2011-62964 919
Phononic Crystals With Full Phase-Space Properties: Application to Boolean Logic Gates
N. Swinteck, S. Bringuier, and P. A. Deymier
IMECE2011-63290 937
An Acoustic Metamaterial Bending Waveguide Design Using Transformation Acoustics
Liang-Yu Wu, Tzeh-Yi Chiang, Mei-Ling Wu, and Lien-Wen Chen
IMECE2011-64549 945
Wave Propagation in Two Dimensional Periodic CompositesHossein Sadeghi, Ankit Srivastava, Ryan Griswold, and Sia Nemat-Nasser
IMECE2011-65247 947
Noise Reduction by Perfect Absorbers Based on Acoustic Meta mate rials
Alfonso Climente, Daniel Torrent, and Jose Sanchez-Dehesa
IMECE2011-65434 953
Effects of Layer Placement in Isotropic Layer Pairs for Producing EquivalentMass Anisotropy
Liang-Wu Cai and Jose Sanchez-Dehesa
IMECE2011-65499 961
Design of Acoustic Filters Using Elastic Resonators
B. Sharma and C. T. Sun
IMECE2011-65662 963
Bloch-Theory-Based Analysis of Damped Phononic Materials
Michael J. Frazier and Mahmoud I. Hussein
IMECE2011-65665 969
Optimization of Phononic Crystals for the Simultaneous Attenuation of Out-of-Plane and
In-Plane Waves
Osama R. Bilal and Mahmoud I. Hussein
IMECE2011-65666 973
Analysis of Periodicity Termination in Phononic CrystalsBruce L. Davis, Andrew S. Tomchek, EdgarA. Flores, Liao Liu, and Mahmoud I. Hussein
IMECE2011-65720 979
Refractive Devices Based on Acoustic Metamaterials
Boge Gracia, Daniel Torrent, and Jose Sanchez-Dehesa
SYMPOSIUM ON VIBRATION AND ACOUSTIC MEASUREMENT
TECHNIQUES AND FACILITIES
IMECE2011-62050 985
Dynamic Measurements of an Industrial Electric Motor Stator Core
Stephen A. Hambric, John B. Fahnline, and Robert L, Campbell
IMECE2011-62333 995
Characterization of In-Pipe Acoustic Wave for Water Leak Detection
Atia E. Khalifa, Rached Ben-Mansour, Kamal Youcef-Toumi, and Changrak Choi
IMECE2011-63518 1001A Study on Measuring the Lateral Motion of a Long Tube Subject to Impulse Loads UsingAcceIerometers and Mechanical Filters
Won-yeong Choi, Seong-yeol Yoo, Ki-up Cha, Sung-Soo Kim, and Myounggyu Noh
IMECE2011-63896 1009Nonlinear Model Tracking in Application to Failed Nondestructive Evaluations
Timothy A. Doughty, Natalie S. Higgins, and Nicholas G. Etzel
Author Index 1017
xx