product catalogue - mzccs · (e0101 & e0201) with the protective case (e0100 & e0200)...
TRANSCRIPT
PRODUCT CATALOGUE
www.etl-trade.com
< > CONTENTSPRODUCT INDEX
•
HEAT TREATMENT EQUIPMENT SETUP DIAGRAM
PRODUCT CATALOGUE
2.7kW 60v Ceramic Heater Pads
Thermocouple Wire, Plug & Socket
Thermocouple Welding Unit is used to attach
Thermocouple wireto job piece underneath
the body of a heater for accurate control
Operating at temperatures of up to 1260°C, Superwool® Ceramic Fibre Insulation Blankets
prolong the life of the insulation. The Insulation Blankets can be used repeatedly
without loss of thermal properties
Heat Treatment Puttyis used to fix over the hot junction
of the termocoupleto avoid possible short circuits,minimising temperature control
& recording errors
Triple Cable Set
Return
Live Feed
70kVa Heat Treatment Transformer
Automatic Temperature Programmer
Compensating Cable
Temperature Recorder in Protective Case
60A Brass Connectors
300A Brass Connectors
4-way Splitter Cables
Example of Ceramic Heater Pads attached to pipe using Stainless Steal Banding DIAGRAM NOT TO SCALE
RESISTANCE HEAT TREATMENT EQUIPMENT - SETUP DIAGRAM
Compensating Cable
CONTENTS
Page 11
Page 22
About Us
Heat Treatment Units 50kVA Heat Treatment Units 70kVA Heat Treatment Units 2
Temperature Measuring & Thermocouple Attachment Equipment Pages 3 to 5Temperature Recorders 3Temperature Recorder Accessories 4Automatic Programmers 5Thermocouple Attachment Units 5
Ceramic Beads Page 6Pink Ceramic Beads 6White Ceramic Beads 6Special Ceramic Beads 6
Flexible Ceramic Pad Heaters Pages 7 to 930v, 40v, 60v & 80v Flexible Ceramic Pad Heaters 7 & 8Channel Heaters 9Flexible Insulated Preheaters 9
Cables & Wires Pages 10 to 11Nickel-Chrome Wires 10Nickel Cold Tail 104-Bank Nickel-Chrome Iron 60/15 10Thermocouple Wires 10Heater Distribution Cables 10Splitter Cables 10Compensating Cables 11Triple Cable Set 11
Plugs, Sockets & Connectors Pages 11 to 12Thermocouple Plugs and Sockets 11Cannon Control Panel Mounted Plug 11300A Brass Connector Camlocks & Components 1260A Brass Connector Camlocks & Components 12
Insulation Products Page 13Superwool® Fibre Blankets & Ceramic Fibre Blankets 13Stainless Steel Mesh 13Insulation Blankets 13
Heat Treatment Accessories & Spares Pages 14 to 15Permanent Round Magnets 14Copper Shims 14Banding Tools 14Thermocouple Putty 14Ferrules 14Cooling Fans 15Electromagnetic Contactors 15Energy Regulator and Knob 15Rocker Switch 15
Product Index Pages 16 to 19
Contact Us Pages 20
< > CONTENTSPRODUCT INDEX1
ABOUT US
Our Historyonducting heat treatment operations for a number of clients across the WORLD. The supply of premium-quality heat treatment products was difficult to come by so Testconsult decided to manufacture their own. The business grew organically from there, with requests for components and heat treatment units from various clients internationally as word spread about our products and services on offer.
Today is one of the world’s leading manufacturers and distributors of heat treatment products, servicing clients from across the globe. Our years of experience has earned us the reputation of being a reliable supplier, providing high-quality products and offering exceptional customer service.
Heat Treatment Units
Plugs, Sockets& Connectors
Ceramic Beads
Temperature Measuring& Thermocouple Attachment
Insulation Products
Cables & Wires
Flexible Ceramic PadHeaters
Heat TreatmentAccessories & Spares
2
HEAT TREATMENT UNITS
IntroductionOffered at 50kVA or 70kVA, with or without built-in individual programmers, our Heat Treatment Units provide power to electrical resistance heaters (at 65v which is split into 6 individual heating circuits to enable the individual temperature control of each circuit.
Operational MethodsThe units with the individual programmers (MZ0100 and MZ0500) have 3 operational methods of heat control; fully-integrated individual programmers, an external Automatic Programmer (AP0100) for all channels, and individual proportional Energy Regulators (ER0100).
The units without individual programmers (MZ0200 and MZ0600) have 2 operational methods of heat control; an external Automatic Programmer (AP0100 for all channels, and individual proportional Energy Regulators (ER0100.
Flexible Ceramic Pad HeatersThe 50kVA units are sufficient for 3 Flexible Ceramic Pad Heaters per channel, while the 70kVA units are sufficient f or 4 Flexible Ceramic Pad Heaters per channel.
MobilityAll units are fully-mobile so are suitable for both site or fabrication shop use.
50 kVA Heat Treatment Unit (MZ0100 & MZ0200)
70 kVA Heat Treatment Unit (MZ0500 & MZ0600)
Product Code MZ0100 MZ0200 MZ0500 MZ0600
Electrical Rating 50kVA 50kVA 70kVA 70kVA
Dimensions 1110 H x 685 W x 695 D mm
1110 H x 685 W x 695 D mm
1200 H x 760 W x 845 D mm
1200 H x 760 W x 845 D mm
Weight 343kg 343kg 400kg 400kg
Primary 415v 415v 415v 415v
Secondary 65v 270A per phase 65v 270A per phase 65v 360A per phase 65v 360A per phase
Cooling Natural Air Cooling Natural Air Cooling Natural Air Cooling Natural Air Cooling
Insulation Class H Class H Class H Class H
Protection MCB shunt trip MCB shunt trip MCB shunt trip MCB shunt trip
Contactors 110v single pole, 180A 110v single pole, 180A 110v single pole, 180A 110v single pole, 180A
Manual Set 6 x energy regulators
6 x energy regulators
6 x energy regulators
6 x energy regulators
Auto Set 6 x Fuji programmers N/A 6 x Fuji
programmers N/A
Remote 2 x 110v Aux sockets
2 x 110v Aux sockets
2 x 110v Aux sockets
2 x 110v Aux sockets
Rating 100% to 35 °C 100% to 35 °C 100% to 35 °C 100% to 35 °C
< > CONTENTSPRODUCT INDEX3
TEMPERATURE RECORDERS
IntroductionThe 12-channel CHINO-Type E Series Temperature Recorder has a recording range of 0°C to 1200°C. It is available in 110v or 220v (Product Codes E0101 and E0102 respectively.
The units are compatible with Type K thermocouple compensating lead connections and have an internal light fitting to illuminate both the scale and chart recordings.
Protective CasesSpecially designed to protect the analogue CHINO-Type E Series Temperature Recorders, our lightweight protective case is sturdy and durable.
Made out of aluminium with a padded foam lining, the CHINO-Type E Series Temperature Recorders can be easily accessed to view both the front of the recorder (for data review and the back (for connections.
Temperature Recorder Accessories Chart paper books, ink bottles and ink pad cases are all available to be used in conjunction with CHINO-type recorders. We also have chart paper for SEKONIC-type recorders as well as for YOKOGAWA-type recorders (B9627AY. Visit our Temperature Recorder Accessories section for more details.
CHINO-Type E Series Temperature Recorder (E0101 & E0201)
With the Protective Case (E0100 & E0200)
Product Code E0100 E0101 E0200 E0201
Dimensions 345 H x 340 W x 487 D mm
300 H x 288 W x 321 D mm
345 H x 340 W x 487 D mm
300 H x 288 W x 321 D mm
Weight 20kg 13.9kg 20kg 13.9kg
Voltage 110v 220v 220v 220v
Frequency 50Hz or 60Hz 50Hz or 60Hz 50Hz or 60Hz 50Hz or 60Hz
Thermocouple Type Type K Type K Type K Type K
No. of Channels 12 12 12 12Temperature Recording Range 0°C to 1200°C 0°C to 1200°C 0°C to 1200°C 0°C to 1200°C
Ambient Temperature Range 0°C to 50°C 0°C to 50°C 0°C to 50°C 0°C to 50°C
Chart Speed options of 12.5, 25, 50 or 100mm/hour
options of 12.5, 25, 50 or 100mm/hour
options of 12.5, 25, 50 or 100mm/hour
options of 12.5, 25, 50 or 100mm/hour
Chart Type CHINO CHINO CHINO CHINO
Protective Case Yes No Yes No
www.etl-trade.com < > CONTENTSPRODUCT INDEX 4
TEMPERATURE RECORDER ACCESSORIES
IntroductionAccessories and spares are essential for the temperature recording process to ensure this is carried out in a smooth and timely fashion.
Chart PaperWe offer chart paper for 3 different types of temperature recorders:• Both the SEKONIC (CP0100) and CHINO
(CP0200) have a temperature recordingrange of 0°C to 1200°C. Each book ofchart paper is 20m in length.
• The YOKOGAWA - B9627AY (CP0300)has a temperature recording range of 0°Cto 100°C. Each book of chart paper is 30min length.
InkOur set of 25ml ink bottles (IK0200) comes with 12 different colours: Green, Blue, Sky Blue, Grey, Brownish Green, Brown, Violet, Purple, Red, Orange, Black and Scarlet.
Our ink is suitable for any type of temperature recorder.
Ink Pad CaseSpecifically for the CHINO-Type E Series Temperature Recorders (RE0101 and RE0102), our Ink Pad Case (IP0200) has 12 sections, one per ink colour,
Easy to remove and replace, refilling can be carried out quickly and efficiently.
SEKONIC Chart Paper Book (CP0100)
CHINO Chart Paper Book (CP0200)
YOKOGAWA B9627AY Chart Paper Book (CP0300)
Temperature Recorder Ink Bottles (IK0200)
Ink Pad Case (IP0200) for CHINO-Type E Series Temperature Recorder
< > CONTENTSPRODUCT INDEX5
AUTOMATIC PROGRAMMER
THERMOCOUPLE ATTACHMENT UNITS
Automatic Programmer Our Automatic 6-channel Programmer (AP0100) provides accurate temperature control - a vital part of the heat treatment process. The rate of heating above a start temperature, soak temperature, and time and rate of cooling down to an end temperature are all precisely controlled.
Thermocouple Attachment UnitThis portable unit (WU0100) for Type K welds approximately 450 applications before the battery requires recharging via a 110v or 220v source (the voltage is adjustable). The integrated shoulder-strap enables easy carrying.
Mini Thermocouple Attachment UnitWelding approximately 250 applications before requiring new AA alkaline batteries, this highly portable unit (WU0200) includes a low battery level light. With a removable shoulder strap, this unit can also be worn on a belt.
Automatic Programmer - 6 Channels (AP0100)
Thermocouple Attachment Unit (WU0100)
Mini Thermocouple Attachment Unit (WU0200)
Product Code WU0100 WU0200
Dimensions 180 H x 305 W x 95 D mm
90 H x145x W x 230 D mm
Weight 3.7kg 1.1kg
Power Supply 110v or 220v (adjustable)
4 x AA alkaline batteries
Frequency 50Hz or 60Hz N/A
Operation Manual Manual or Auto
Thermocouple Type Type K Type K
Discharge Energy 25J 20-50J
Battery Recharge 6-8hrs N/A
Auto Switch-Off N/A After 3mins
Product Code AP0100
Dimensions 152 H x 270 W x 441 D mm
Weight 7.2kg
Voltage 110v
Frequency 50Hz or 60Hz
Thermocouple Type Type K
Temperature Range 0°C to 1200°C in 1°C steps
Rate of Rise/Fall: 1°C to 999°C/hr in 1°C steps
Time 0-99hrs 50mins in 1min steps
www.etl-trade.com < > CONTENTSPRODUCT INDEX 6
CERAMIC BEADS
IntroductionCeramic Beads are used in Flexible Ceramic Pad Heaters, Channel Heaters and Flexible Insulated Preheaters (see pages 7 to 9). Our ceramic beads can withstand temperatures of up to 1460°C in the long term and 1580°C in the short term.
Pink or White Ceramic BeadsFor use in Flexible Ceramic Pad Heaters and Flexible Insulated Preheaters, the 5 shapes are available in pink or white colours:• Female End Ceramic Bead
(PB0100 & WB0100)• Male End Ceramic Bead
(PB0200 & WB0200)• Main Body Ceramic Bead
(PB0300 & WB0300)• Main Body Ceramic Bead with Hole
(PB0400 & WB0400)• Tail Ceramic Bead - 23mm
(PB0500 & WB0500)
Special Ceramic BeadsFor use in Channel Heaters and available only in pink colour, our Special Ceramic Beads come in a variety of shapes and sizes:• Top Hat Ceramic Bead (SB0100)• Slotted Ceramic Bead (SB0200)• Main Body Ceramic Bead 18.7mm
(SB0300)• Twin Hole Ceramic Bead (SB0400)• Cold Junction Ceramic Bead (SB0500)• Cold Tail Ceramic Bead (SB0600)• Junction Ceramic Bead (SB0700)• Olive Ceramic Bead (SB0800)• Main Body Ceramic Bead (SB0900)• Barrel Ceramic Bead (SB1000)• Tank Track Ceramic Bead with Hole
(TT0100)• Tank Track Ceramic Bead without Hole
(TT0200)
Pink Ceramic Beads (L-R):Female End Ceramic Bead (PB0100),
Male End Ceramic Bead (PB0200), Main Body Ceramic Bead (PB0300),
Main Body Ceramic Bead with Hole (PB0400) & Tail Ceramic Bead - 23mm (PB0500)
White Ceramic Beads (L-R):Female End Ceramic Bead (WB0100),
Male End Ceramic Bead (WB0200), Main Body Ceramic Bead (WB0300),
Main Body Ceramic Bead with Hole (WB0400) & Tail Ceramic Bead - 23mm (WB0500)
Special Ceramic Beads:Front Row (L-R): Top Hat Ceramic Bead (SB0100),
Slotted Ceramic Bead (SB0200), Main Body Ceramic Bead 18.7mm (SB0300),
Twin Hole Ceramic Bead (SB0400), Cold Junction Ceramic Bead (SB0500),
Cold Tail Ceramic Bead (SB0600), Junction Ceramic Bead (SB0700),
Olive Ceramic Bead (SB0800), Main Body Ceramic Bead 14mm (SB0900)
& Barrel Ceramic Bead (SB1000)Back Row (L-R): Tank Track Ceramic Bead with Hole (TT0100)
& Tank Track Ceramic Bead without Hole (TT0200)
Products Ceramic Beads
Colour Pink or White (PANTONE 271U or RAL9003)
Material Aluminium Oxide 93.1%
Water Absorption Rate 0.01% (by wt.)
Compression Strength 1280 Mpa @ 25°C
Dielectric Strength 15.18 MV/m
Temperature Shock Test @ 800°C 15 times (max. 1000°C)Safety Working Temperatures
1460°C long term1580°C short term
< > CONTENTSPRODUCT INDEX7
Code CP Code Volts kW H (mm) W (mm) A (mm) B (mm)
CH0101 CP3 60 2.7 75 660 290 260
CH0102 CP4 60 2.7 100 495 270 260
CH0103 CP6 60 2.7 150 330 300 260
CH0104 CP8 60 2.7 205 250 290 260
CH0105 CP10 60 2.7 255 205 210 260
CH0106 CP12 60 2.7 305 165 290 260
CH0107 CP15 60 2.7 380 145 100 260
CH0108 CP16 60 2.7 405 125 290 260
CH0109 CP21 60 2.7 535 100 150 260
CH0110 CP24 60 2.7 610 85 290 260
CH0111 CP48 60 2.7 1220 45 340 260
CH0112 CP10 30 1.35 255 85 420 260
CERAMIC PAD HEATERS (30v, 40v, 60v & 80v)
IntroductionIdeal for the pre- and post-heat of welds, we offer 30v (1.35kW), 40v (1.8kW) and 60v (2.7kW) and 80v (3.6kW) Flexible Ceramic Pad Heaters which have a maximum working temperature of 1000°C.
Modular DesignsModular designs enable our Flexible Ceramic Pad Heaters to be made in a number of configurations to suit a wide variety of shapes and sizes.
Dimensions of these are supplied in the chart below, however please do contact us for any bespoke configurations which are not listed.
MaterialsComposed of 19-strand Nickel-Chrome 80/20 wire (WI0301) and 19-strand Nickel Cold Tail wires (WI0400) inter-woven throughout the various configurations of Ceramic Beads (PB0100, PB0200, PB0300, PB0400, PB0500 and WB0500). 2 pieces of 60v Complete Sets of Brass Connector Plugs (Male Camlocks CA0700) are used at the end of the tail beads to connect the Flexible Ceramic Pad Heaters to the Heat Treatment Units.
Flexible Ceramic Pad Heaters should be fitted to the component by banding (see Heat Treatment Accessories section on page 14) or other secure means. All connectors should also be fully secured.
H
W A B
Flexible Ceramic Pad Heaters
Diagram for measurements
www.etl-trade.com < > CONTENTSPRODUCT INDEX 8
Code CP Code Volts kW H (mm) W (mm) A (mm) B (mm)
CH0201 CP3 80 3.6 75 910 350 260
CH0202 CP4 80 3.6 100 680 680 260
CH0203 CP6 80 3.6 150 450 720 260
CH0204 CP8 80 3.6 205 350 370 260
CH0205 CP10 80 3.6 255 290 250 260
CH0206 CP12 80 3.6 305 230 370 260
CH0207 CP15 80 3.6 380 185 250 260
CH0208 CP17 80 3.6 430 165 180 260
CH0209 CP21 80 3.6 535 145 330 260
CH0210 CP33 80 3.6 840 85 660 260
CH0211 CP66 80 3.6 1675 45 660 260
CH0212 CP30 40 1.8 780 45 440 260
CERAMIC PAD HEATERS (30v, 40v, 60v & 80v)
30v & 60v Flexible Ceramic Pad Heaters
40v & 80v Flexible Ceramic Pad Heaters
Materials
CP3 (CH0101)
CP3 (CH0201)
WI0301 WI0400 PB0100 PB0200 PB0300 PB0400 PB0500 WB0500 CA0700
CP15 (CH0107)
CP15 (CH0207)
CP4 (CH0102)
CP4 (CH0202)
CP16 (CH0108)
CP17 (CH0208)
CP6 (CH0103)
CP6 (CH0203)
CP21 (CH0109)
CP21 (CH0209)
CP8 (CH0104)
CP8 (CH0204)
CP24 (CH0110)
CP33 (CH0210)
CP10 (CH0105)
CP10 (CH0205)
CP48 (CH0111)
CP66 (CH0211)
CP12 (CH0106)
CP12 (CH0206)
CP10 (CH0112)
CP30 (CH0212)
< > CONTENTSPRODUCT INDEX9
CHANNEL HEATERS
FLEXIBLE INSULATED PREHEATERS
Channel HeatersBoth the 4-Bank (BH0100) and Single-Bank (BH0200) Channel Heaters are suitable for furnace installations and/or temporary furnaces and require a mains voltage supply.
Channel Heaters transfer heat via radiation and are composed of Nickel-Chrome 80/20 wire, Special Ceramic Beads and 2 pieces of 60v Complete Sets of Brass Connector Plugs (Male Camlocks CA0700), all embedded in a stainless steel frame.
Flexible Insulated PreheatersFlexible Insulated Preheaters are suitable for low temperature preheat treatment.
The Flexible Ceramic Pad Heater is mounted onto an insulated Superwool® Ceramic Fibre Blanket (CF0200) which is surrounded by a Stainless Steel Mesh (SM0100).
The stainless steel backing allows the pad to be applied quickly to metal surfaces using magnetic fixings or by banding.
4-Bank Channel Heater (BH0100)
Flexible Insulated Preheater CP3 (FP0101)
Single-Bank Channel Heater (BH0200)
Flexible Insulated Preheater CP4 (FP0102)
Product Code FP0101 FP0102
Dimensions of Body 100 H x 750 W x 40 D mm
128 H x 585 W x 40 D mm
Length of Tail Beads and Camlocks 465mm 465mm
Weight 2.8kg 2.8kg
Voltage 60v 60v
Power 2.7kW 2.7kWMaximum Working Temperature 250°C 250°C
Ceramic Pad CP3 CP4
Product Code BH0100 BH0200
Dimensions of Body 340 H x 720 W x 34 D mm
66 H x 720 W x 34 D mm
Length of Twin Hole Beads and Camlocks 490mm 490mm
Weight 17kg 4.5kg
Voltage 240v 60v
Power 13.2kW 3,3kWMaximum Working Temperature 800°C 800°C
www.etl-trade.com < > CONTENTSPRODUCT INDEX 10
CABLES & WIRES
IntroductionCables & Wires are vital for the heat treatment process.
Nickel-Chrome WiresNickel-Chrome is essential for resistor elements in high temperature applications and operates at temperatures up to 1000°C.
Nickel-Chrome is available in:• 19-strand Nickel-Chrome 80/20 (WI0301)• 37-strand Nickel-Chrome 80/20 (WI0302)• 19-strand Nickel-Chrome Iron Core 60/15
(WI0200)Each roll has 500m length of 2.83mm diameter wire.
Nickel Cold TailOur 19-strand Nickel Cold Tail wire (WI0400) can be either butt welded or crimped together to the Nickel-Chrome Wires using Ferrules. Each roll has 500m length of 3.07mm diameter wire.
4-Bank Nickel-Chrome Iron 60/15The 3.5mm diameter 4-Bank Nickel-ChromeIron 60/15 (WI0600) is a spare part for theChannel Heaters (BH0100 & BH0200).
Thermocouple WiresType K Thermocouple Wire provides accuracy within ±1.5°C. Available in:• Type K, 2 x 0.65mm NiCr/NiSi (WI0100)• Type KX, 2 x 7/0.2mm NiCr/NiSi (WI0101)with maximum working temperatures of800°C and 105°C respectively.
Heater Distribution CablesSupplying electrical energy to heaters and used in Splitter Cables (see below), each roll has 100m length of cable. Double insulated with rubber jackets, our Heater Distribution Cables are available in 16mm2 (WI0900) and 25mm2 (WI0901) diameters.
Splitter CablesUsed to connect heating elements in parallel to Triple Cable Sets (TR0100) and allow for the accurate zonal temperature control of multiple heating elements from one single control output. Available 2-, 3- or 4-ways, (ST0100, ST0200 and ST0300 respectively).
16mm2 Heater Distribution Cable (WI0900)
Thermocouple Type K (WI0100)
25mm2 Heater Distribution Cable (WI0901)
Thermocouple Type KX (WI0101)
Nickel Wires:19-strand Nickel-Chrome 80/20 (WI0301)37-strand Nickel-Chrome 80/20 (WI0302)19-strand Nickel-Chrome 60/15 (WI0200)
19-strand Nickel Cold Tail (WI0400)
4-Bank Nickel-Chrome Iron 60/15 (WI0600)
Splitter Cables (L-R):ST0100, ST0200 & ST0300
< > CONTENTSPRODUCT INDEX11
CABLES & WIRES (continued)
PLUGS & SOCKETS
Compensating CableDesigned for interconnection between thermocouple cable and control and recording instrumentation. Suitable for use with Type K Thermocouples.
Each roll of Compensating Cable (WI0500) has 100m length of cable.
Triple Cable SetUsing 2 x 25mm2 Heater Distribution Cable (WI0901) and 1 x Compensating Cable (WI0500), this PVC insulated Triple-Cable Set (TR0100) connects Heat Treatment Units to the heaters and thermocouple. Fitted with 300A Brass Connector Plugs & Sockets (CA0500 & CA0600) and a Thermocouple Plug & Socket (TC0101 & TC0102), the set is sold in 30m lengths.
Thermocouple Plugs & SocketsMade from glass-filled polyester for Type K Thermocouples, our yellow Thermocouple Plugs & Sockets have a working temperature of -40 to 220°C and are used to connect the Thermocouple Wire (WI0100 and WI0101), Compensating Cable (WI0500) and recording and/or control instrumentation.
The variety of plugs and sockets available ensures the circuit can easily be fully-connected according to the client’s needs:• Thermocouple Plug In-Line Male (TC0101)• Thermocouple Socket In-Line Female
(TC0102)• Thermocouple Socket Panel Mounted
Female (TC0300)
Cannon Control Panel Mounted PlugOur Cannon Control Panel Mounted Plug (CC0201) has a universal 3-pin XLR type housing which may be mounted on the rear of the Heat Treatment Units (PS0100, PS0200, PS0500 & PS0600) for connection to an external Automatic Programmer (AP0100).
Thermocouple Plugs & Sockets (L-R):TC0102, TC0300, TC0101
Cannon Control Panel Mounted Plug (CC0201)
Compensating Cable (WI0500)
Triple Cable Set (TR0100)
www.etl-trade.com < > CONTENTSPRODUCT INDEX 12
BRASS CONNECTOR CAMLOCKS
IntroductionCamlocks are spares for use on various units and elements in the heat treatment process.
Panel Mounted Camlocks are used on Heat Treatment Units and are made from Brass and Polyamide.
In-Line Brass Connector Camlocks are used on Triple Cable Sets, Splitter Cables and Flexible Ceramic Pad Heaters and comprise of 3 components:• Sleeve (made from Epoxy Resin)• Body (made from Brass)• Retaining Pin (made from ABS)Each component can be purchasedseparately or as part of a complete set.
300A Brass Connector Camlocks For use on Heat Treatment Units, Triple Cable Sets and Splitter Cables:• 300A Panel Mounted Black Camlock
Female (PM0100)• 300A Panel Mounted White Camlock
Female (PM0200)• 300A Brass Connector Plug (Male
Camlock) Complete Set (CA0500)• 300A Brass Connector Socket (Female
Camlock) Complete Set (CA0600)
Components:• 300A Camlock Body Male (CA0101)• 300A Camlock Body Female (CA0201)• 300A Camlock Sleeve Male (CA0510)• 300A Camlock Sleeve Female (CA0610)• 300A Camlock Retaining Pin (CA0203)
60A Brass Connector CamlocksFor use on Heat Treatment Units, Splitter Cables and Flexible Ceramic Pad Heaters:• 60A Panel Mounted Black Camlock Female
(PM0300)• 60A Brass Connector Plug (Male Camlock)
Complete Set (CA0700)• 60A Brass Connector Socket (Female
Camlock) Complete Set (CA0800)
Components:• 60A Camlock Body Male (CA0301)• 60A Camlock Body Female (CA0401)• 60A Camlock Sleeve Male (CA0710)• 60A Camlock Sleeve Female (CA0810)• 60A Camlock Retaining Pin (CA0403)
60A Female Brass Connector Camlock (L-R):Complete Set (CA0800), Sleeve (CA0810), Body (CA0401)
& Retaining Pin (CA0403)
300A Female Brass Connector Camlock (L-R):Complete Set (CA0600), Sleeve (CA0610), Body (CA0201)
& Retaining Pin (CA0203)
60A Male Brass Connector Camlock (L-R):Complete Set (CA0700), Sleeve (CA0710), Body (CA0301)
& Retaining Pin (CA0403)
300A Male Brass Connector Camlock (L-R):Complete Set (CA0500), Sleeve (CA0510), Body (CA0101)
& Retaining Pin (CA0203)
60A Panel Mounted Black Female Camlock(PM0300)
300A Female Panel Mounted Camlocks (L-R): Black (PM0100)White (PM0200)
< > CONTENTSPRODUCT INDEX13
Code Width (mm) Depth (mm)
CF0500 300 300
CF0501 600 300
CF0502 900 300
CF0503 600 600
CF0504 900 600
CF0505 1200 600
CF0506 1800 600
CF0507 3600 600
CF0508 7200 600
INSULATION PRODUCTS
Fibre BlanketsSuperwool® and Ceramic Fibre Blankets are used as a general insulation material and is the main component used to make insulation blankets (see below). Easy to cut and install, we offer 2 types of blanket:• Ceramic Fibre is made of long fibres and
comes in 128kg/m3 and 96kg/m3 densitieswith a maximum working temperature of1260°C (CF0100 and CF0101).
• Superwool® is made of soft, short fibresand has a maximum working temperatureof 1260°C (CF0200).
Stainless Steel MeshUsed to cover all our Fibre Blankets to make insulation pads (see below), the Stainless Steel Mesh is required to hold the Ceramic Fibre Blanket together.
We have 2 sizes of mesh rolls available:• 635mm wide, 30m in length (SM0100)• 300mm wide, 50m in length (SM0200)
Insulation BlanketsOperating at temperatures of up to 1260°C, our Insulation Blankets are made from Superwool® Ceramic Fibre Blankets (CF0200) and protected in Stainless Steel Mesh (SM0100 & SM0200) to prolong the life of the insulation. The Insulation Blankets can be used repeatedly without loss of thermal properties and are available in 9 sizes:
For bespoke sizes, please contact us directly for a quote or consider purchasing the materials to make them as needed.
Superwool® & Ceramic Fibre Blankets (CF0200, CF0100 & CF0101)
Stainless Steel Mesh 635mm wide (SM0100)
Stainless Steel Mesh 300mm wide (SM0101)
Insulation Pads (Top-Bottom):300x300 (CF0500), 600x300 (CF0501), 900x300 (CF0502), 600x600 (CF0503), 900x600 (CF0504), 1200x600 (CF0505)
Insulation Pads - Superwool® Ceramic Fibre Blankets (CF0200) & Stainless Steel Mesh (SM0100 & SM0200)
www.etl-trade.com < > CONTENTSPRODUCT INDEX 14
HEAT TREATMENT ACCESSORIES
IntroductionTo facilitate the heat treatment process, we offer a selection of useful accessories.
Permanent Round MagnetsUsed to hold Flexible Insulated Preheaters in place during preheat treatment. With a magnetic induction of 500-700Gs, Permanent Round Magnets (RM0100).
Copper ShimsCopper Shims are used to wrap around the multistrand bared wires of the Heater Distribution Cables (WI0900 & WI0901) to ensure that the strands of wires remain in tact during connection to Camlocks. Rolls are available in 2 widths:• Copper Shims ¾” (CS0100), 46.6m long• Copper Shims ½” (CS0200), 72.2m long
Banding ToolsTo generate successful results during heat treatment processes, Ceramic Pad Heaters must be held in position securely. This is done by banding which requires 3 components:• Stainless Steel Banding Strap (BS0100)
has 30m per roll• Stainless Steel Banding Clips (BS0200)
are sold with 100 pieces per set• Banding Machine (BS0300) is sold as a
single unit and is used to tighten, cut off andclip the Stainless Steel Banding Strap andClips in place
Thermocouple PuttyThermocouple Putty (PT0100) is used to fix over the hot junction of the thermocouple. After 20 minutes, the putty dries and hardens to protect the hot junction and help avoid possible short circuits, minimising temperature control and recording errors. Sold as a single item in 1kg jars.
FerrulesThere are 2 methods of securing the junction where the Nickel-Chrome 80/20 wire (WI0301 & WI0302) connects to the Nickel Cold Tail Wire (WI0400); welding or crimping. Both options require ferrules:• Welding Ferrule (WF0100) is 1” in length• Crimping Ferrule (SC0100) is 0.5” in lengthMade from Stainless Steel, our ferrules aresold with 50 pieces per set.
Thermocouple Putty (PT0100)
Banding Machine (BS0300)
Stainless Steel Banding Strap (BS0100)
Copper Shims ¾” (CS0100)
Copper Shims ½” (CS0200)
Welding Ferrule(WF0100)
Stainless Steel Banding Clips (BS0200)
Crimping Ferrule(SC0100)
Permanent Round Magnets (RM0100)
< > CONTENTSPRODUCT INDEX15
IntroductionOccasionally some components used in the heat treatment process require replacing. Rather than unnecessarily replacing the whole unit, we offer these components as spare parts.
Cooling FanCooling fans are used in Heat Treatment Units to enhance ventilation within the unit and minimise heat build-up. Our 100v Cooling Fan (FA0100) is sold as a single item - no minimum order required.
Electromagnetic ContactorsSingle Pole Electromagnetic Contactors are used in Heat Treatment Units to control the switching of power supply to each channel.
Choose the option with a magnet fitted inside to extend the lifespan of the fitted contacts for DC application:• 110v Single Pole Electromagnetic
Contactor with Magnet (EC0100)• 110v Single Pole Electromagnetic
Contactor without Magnet (EC0200)• 220v Single Pole Electromagnetic
Contactor with Magnet (EC0101)• 220v Single Pole Electromagnetic
Contactor without Magnet (EC0201)Each option is sold as a single item - no minimum order required.
Energy Regulator & KnobEnergy Regulators (ER0100) are used in Heat Treatment Units to provide proportional control for temperature regulation.
The Knob for Energy Regulators (KB0100) is sold separately as a single item - no minimum order required.
Rocker SwitchRocker Switches (RS0100) are used on Heat Treatment Units to select input control from either external or internal Automatic Programmers. Sold as a single item - no minimum order required.
Rocker Switch (RS0100)
Knob for Energy Regulator (KB0100)
Energy Regulator (ER0100)
Single Pole Electromagnetic Contactors (EC0100, EC0200, EC0101, EC0201)
Cooling Fan (FA0100)
HEAT TREATMENT SPARES
www.etl-trade.com < > CONTENTSPRODUCT INDEX 16
Product Code Product Description Page
Heat Treatment UnitsMZ0100 50kVA Heat Treatment Unit with Individual Programmers - 6 ways 2
MZ0200 50kVA Heat Treatment Unit without Programmers - 6 ways 2
MZ0500 70kVA Heat Treatment Unit with Individual Programmers - 6 ways 2
MZ0600 70kVA Heat Treatment Unit without Programmers - 6 ways 2
Temperature Measuring & Thermocouple Attachment EquipmentE0101 CHINO-Type Recorder E Series 12pt - 110v (non-linear) 3
E0201 CHINO-Type Recorder E Series 12pt - 220v (non-linear) 3
E0100 CHINO-Type Recorder E Series 12pt with Protective Case - 110v (non-linear) 3
E0200 CHINO-Type Recorder E Series 12pt with Protective Case - 220v (non-linear) 3
RP0100 CHINO-Type Recorder E Series Protective Case 3
AP0100 Automatic Programmer - 6 Channels 5
WU0100 Thermocouple Attachment Unit 5
WU0200 Mini Thermocouple Attachment Unit 5
CP0100 SEKONIC Chart Paper Book 4
CP0200 CHINO Chart Paper Book 4
CP0300 YOKOGAWA Chart Paper Book (B9627AY) 4
IK0200 CHINO Temperature Recorder Ink Bottles 12pt 4
IP0200 CHINO Temperature Recorder Ink Pad Case 12pt 4
Flexible Ceramic Pad HeatersCH0101 Flexible Ceramic Pad Heater CP3 (60v, 2.7kW) 7
CH0102 Flexible Ceramic Pad Heater CP4 (60v, 2.7kW) 7
CH0103 Flexible Ceramic Pad Heater CP6 (60v, 2.7kW) 7
CH0104 Flexible Ceramic Pad Heater CP8 (60v, 2.7kW) 7
CH0105 Flexible Ceramic Pad Heater CP10 (60v, 2.7kW) 7
CH0106 Flexible Ceramic Pad Heater CP12 (60v, 2.7kW) 7
CH0107 Flexible Ceramic Pad Heater CP15 (60v, 2.7kW) 7
CH0108 Flexible Ceramic Pad Heater CP16 (60v, 2.7kW) 7
CH0109 Flexible Ceramic Pad Heater CP21 (60v, 2.7kW) 7
CH0110 Flexible Ceramic Pad Heater CP24 (60v, 2.7kW) 7
CH0111 Flexible Ceramic Pad Heater CP48 (60v, 2.7kW) 7
CH0112 Flexible Ceramic Pad Heater CP10 (30v, 1.35kW) 7
CH0201 Flexible Ceramic Pad Heater CP3 (80v, 3.6kW) 7
CH0202 Flexible Ceramic Pad Heater CP4 (80v, 3.6kW) 7
CH0203 Flexible Ceramic Pad Heater CP6 (80v, 3.6kW) 7
CH0204 Flexible Ceramic Pad Heater CP8 (80v, 3.6kW) 7
CH0205 Flexible Ceramic Pad Heater CP10 (80v, 3.6kW) 7
CH0206 Flexible Ceramic Pad Heater CP12 (80v, 3.6kW) 7
CH0207 Flexible Ceramic Pad Heater CP15 (80v, 3.6kW) 7
CH0208 Flexible Ceramic Pad Heater CP17 (80v, 3.6kW) 7
CH0209 Flexible Ceramic Pad Heater CP21 (80v, 3.6kW) 7
CH0210 Flexible Ceramic Pad Heater CP33 (80v, 3.6kW) 7
CH0211 Flexible Ceramic Pad Heater CP66 (80v, 3.6kW) 7
CH0212 Flexible Ceramic Pad Heater CP30 (40v, 1.8kW) 7
PRODUCT INDEX
< > CONTENTSPRODUCT INDEX17
Product Code Product Description Page
Flexible Ceramic Pad Heaters (continued)BH0100 4-Bank Channel Heater (240v) 9
BH0200 Single Bank Channel Heater (60v) 9
FP0101 Flexible Insulated Preheater CP3 (60v, 2.7kW) 9
FP0102 Flexible Insulated Preheater CP4 (60v, 2.7kW) 9
Ceramic BeadsPB0100 Female End Ceramic Bead - Pink 6
PB0200 Male End Ceramic Bead - Pink 6
PB0300 Main Body Ceramic Bead - Pink 6
PB0400 Main Body Ceramic Bead with Hole - Pink 6
PB0500 Tail Ceramic Bead (23mm) - Pink 6
WB0100 Female End Ceramic Bead - White 6
WB0200 Male End Ceramic Bead - White 6
WB0300 Main Body Ceramic Bead - White 6
WB0400 Main Body Ceramic Bead with Hole - White 6
WB0500 Tail Ceramic Bead (23mm) - White 6
SB0100 Top Hat End Ceramic Bead - Pink 6
SB0200 Slotted Ceramic Bead - Pink 6
SB0300 Main Body Ceramic Bead (18.7mm) - Pink 6
SB0400 Twin Hole Ceramic Bead - Pink 6
SB0500 Cold Junction Ceramic Bead - Pink 6
SB0600 Cold Tail Ceramic Bead - Pink 6
SB0700 Junction Ceramic Bead - Pink 6
SB0800 Olive Ceramic Bead - Pink 6
SB0900 Main Body Ceramic Bead (14mm) - Pink 6
SB1000 Barrel Ceramic Bead - Pink 6
TT0100 Tank Track Ceramic Bead with Hole - Pink 6
TT0200 Tank Track Ceramic Bead without Hole - Pink 6
Cables & WiresWI0200 19-strand Nickel-Chrome Iron Core Wire (60/15) 10
WI0301 19-strand Nickel-Chrome Wire (80/20) 10
WI0302 37-strand Nickel-Chrome Wire (80/20) 10
WI0400 19-strand Nickel Cold Tail Wire 10
WI0600 4-Bank Nickel-Chrome Iron Wire (60/15) 10
WI0100 Thermocouple Wire, Type K, 2 x 0.65mm NiCr/NiSi 10
WI0101 Thermocouple Wire, Type KX, 2 x 7/0.2mm NiCr/NiSi 10
WI0900 16mm2 Heater Distribution Cable (double insulated) 10
WI0901 25mm2 Heater Distribution Cable (double insulated) 10
WI0500 Compensating Cable 11
ST0100 2-way Splitter Cable 10
ST0200 3-way Splitter Cable 10
ST0300 4-way Splitter Cable 10
TR0100 Triple-Cable Set with Plug & Socket 11
PRODUCT INDEX (continued)
www.etl-trade.com < > CONTENTSPRODUCT INDEX 18
PRODUCT INDEX (continued)
Product Code Product Description Page
Plugs, Sockets & ConnectorsTC0101 Thermocouple Plug - In-Line (Male) 11
TC0102 Thermocouple Socket - In-Line (Female) 11
TC0300 Thermocouple Socket - Panel Mounted (Female) 11
CC0201 Cannon Control Panel Mounted Plug 11
PM0100 300A Female Panel Mounted Camlock (Black) 12
PM0200 300A Female Panel Mounted Camlock (White) 12
CA0500 300A Brass Connector Plug (Male Camlock) Complete Set 12
CA0600 300A Brass Connector Socket (Female Camlock) Complete Set 12
CA0101 300A Connector Plug Brass Body (Male Camlock) 12
CA0201 300A Connector Socket Brass Body (Female Camlock) 12
CA0510 300A Connector Plug Insulated Sleeve (Male Camlock) 12
CA0610 300A Connector Socket Insulated Sleeve (Female Camlock) 12
CA0203 300A Connector Pin (Male & Female Camlock) 12
PM0300 60A Female Panel Mounted Camlock 12
CA0700 60A Brass Connector Plug (Male Camlock) Complete Set 12
CA0800 60A Brass Connector Socket (Female Camlock) Complete Set 12
CA0301 60A Connector Plug Brass Body (Male Camlock) 12
CA0401 60A Connector Socket Brass Body (Female Camlock) 12
CA0710 60A Connector Plug Insulated Sleeve (Male Camlock) 12
CA0810 60A Connector Socket Insulated Sleeve (Female Camlock) 12
CA0403 60A Connector Pin (Male & Female Camlock) 12
Insulation ProductsCF0100 Ceramic Fibre Blanket - 128kg/m3 13
CF0101 Ceramic Fibre Blanket - 96kg/m3 13
CF0200 Superwool® Fibre Blanket - 128kg/m3 13
SM0100 Stainless Steel Mesh - 635mm 13
SM0101 Stainless Steel Mesh - 330mm 13
CF0500 Superwool® Fibre in Stainless Steel Mesh - 300 x 300mm 13
CF0501 Superwool® Fibre in Stainless Steel Mesh - 600 x 300mm 13
CF0502 Superwool® Fibre in Stainless Steel Mesh - 900 x 300mm 13
CF0503 Superwool® Fibre in Stainless Steel Mesh - 600 x 600mm 13
CF0504 Superwool® Fibre in Stainless Steel Mesh - 900 x 600mm 13
CF0505 Superwool® Fibre in Stainless Steel Mesh - 1200 x 600mm 13
CF0506 Superwool® Fibre in Stainless Steel Mesh - 1800 x 600mm 13
CF0507 Superwool® Fibre in Stainless Steel Mesh - 3600 x 600mm 13
CF0508 Superwool® Fibre in Stainless Steel Mesh - 7200 x 600mm 13
< > CONTENTSPRODUCT INDEX19
PRODUCT INDEX (continued)
Product Code Product Description Page
Heat Treatment Accessories & SparesRM0100 Permanent Round Magnet 14
CS0100 Copper Shims ¾" 14
CS0200 Copper Shims ½" 14
BS0100 Stainless Steel Banding Strap 14
BS0200 Stainless Steel Banding Clips 14
BS0300 Banding Machine 14
PT0100 Thermocouple Putty 14
WF0100 Welding Ferrule 14
SC0100 Crimping Ferrule 14
FA0100 Cooling Fan for Heat Treatment Units 15
EC0100 110v Single Pole Electromagnetic Contactor (with Magnet) 15
EC0200 110v Single Pole Electromagnetic Contactor (without Magnet) 15
EC0101 220v Single Pole Electromagnetic Contactor (with Magnet) 15
EC0201 220v Single Pole Electromagnetic Contactor (without Magnet) 15
ER0100 Energy Regulator 15
KB0100 Knob for Energy Regulator 15
RS0100 Rocker Switch (Auto/Manual) 15
< > CONTENTSPRODUCT INDEX 20
CONTACT US
If you have any questions regarding our products, please don’t hesitate to contact our Head Office Contact details can be found below.
MZ Construction Consumable Supply LTD23A Botwell Lane, Hayes,
Middlesex, United Kingdom,UB3 2AB
Contact Number: +447424438725Contact Email: [email protected] ,[email protected]
Web site: www.mzccs.co.ukCompany Registration No: 10347411
VAT Registration No: 250 7305 31EORI Registration No: GB250730531000
8/F, Block B, Veristrong Industrial Centre, 34-36 Au Pui Wan Street, Fo Tan, Hong KongW: www.etl-trade.com E: [email protected] T: +852 2695 8318
© 2017 ETL Trade Ltd.