product engineering
TRANSCRIPT
Components-Q415Upper and Lasting Findings
Upper and Lasting Findings828-9/2227
Project: Craze Balius
The power flash of power logo has lots of whit dots which destroy the Brand value
This is okay ,follow this…..Vinne: Actually both colors used the same materials. Different look is caused by bright PU. Pls further advise. Otherwise need to remove the perforation for white color.
Wrinkle found on vamp lining
Use paste for better lamination to remove the wrinkle and also check the pattern
Vinne: Noted. Will improve in production directly.
Quarter lining up to feather edge of
upper, need 8 mm short at quarter area.
Visible marking. Clean before completeVinne: Noted. Will improve in production directly.
Missed feather edge stitch
Stitch properlyVinne: Noted. Will improve in production directly.
Components-Q415
Art-828-6/2236Project- Mog Chronos
Not used similar materials for the two articles
Black on has less perceive value than grey,coustomer may confuse as a damaged materials
Vinne: Noted. Will ask the supplier to change the material of black version same as grey In production directly.
No paste is used for quarter attachingUse paste and attach
No reinforcement tape is used(with elastic)Used nylon tape
Vinne: Noted. Will improve in production directly.
Wrinkle found on vamp lining
Check the pattern and follow the proper workmanship
Vinne: Noted. Will improve in production directly.
Not follow 1.5 mm stitch allowance
Effect prominent after lasting, resist normal
sole attachment.Follow 1.5 mm stitch
allowanceVinne: Noted. Will improve in production directly.
Thank You