product manual section 10 - kestrel...
TRANSCRIPT
Kestrel Aluminium Systems Limited
Product Manual Section 10Thermal Framing System
Manual Version 23.0.1
© Kestrel Aluminium Systems Thermal Framing System
Section 10 Contents
Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and
specifications without prior notice.
10.01.00
Sheet 1 01.11.14
Section 10.01 – Product Specification 10.01.01 sheet 1 Product specification
10.01.01 sheet 2 Product specification – Therm software images
10.01.01 sheet 3 Product specification – Therm software images
Section 10.02 – Section ID 10.02.01 sheet 1 Section ID – KAS721 and KAS722
10.02.02 sheet 1 Section ID – KAS723, KAS724 and KAS726
10.02.03 sheet 1 Section ID – KAS725, KAS727, KAS728 and KAS729
10.02.04 sheet 1 Section properties
Section 10.03 – Typical details 10.03.01 sheet 1 Mullion
10.03.02 sheet 1 Jamb
10.03.03 sheet 1 Cills – KAS725
10.03.03 sheet 2 Cills – KAS621/624 and KAS621/625
10.03.03 sheet 3 Cills – KAS622/629
10.03.04 sheet 1 Transom
10.03.05 sheet 1 Head with KAS723
10.03.06 sheet 1 Head with KAS721
10.03.07 sheet 1 Double mullion (movement joint)
10.03.08 sheet 1 Corner post
10.03.08 sheet 2 Corner post
10.03.09 sheet 1 Door header bar
10.03.09 sheet 2 Door header bar – Part elevation
10.03.10 sheet 1 Door jamb – Locking stile with KAS724
10.03.10 sheet 2 Door jamb – Locking stile with KAS40
10.03.10 sheet 3 Door jamb – Locking stile with KAS728
10.03.11 sheet 1 Door jamb – Hinge stile with KAS724
10.03.11 sheet 2 Door jamb – Hinge stile with KAS40
10.03.11 sheet 3 Door jamb – Hinge stile with KAS728
10.03.12 sheet 1 Door thresholds
10.03.13 sheet 1 Vent inserts – 60mm casement window shown
10.03.14 sheet 1 Vent inserts – 60mm casement window shown
10.03.15 sheet 1 Glazing options
New manual pages – New profiles 10.03.08 sheet 3 KAS719 90° Corner post – New section
10.03.16 sheet 1 KAS718 Auto Header Transom – New section
10.03.16 sheet 2 KAS718 Part glazed
10.03.16 sheet 3 KAS718 with KAS722
10.03.16 sheet 4 KAS718 with GEZE EC Drive shown as example (a3)
10.03.17 sheet 1 KAS717 Heavy Duty Mullion & section properties
THERMAL FRAMING SYSTEM
The Thermal Framing System is for use on commercial and retail buildings, schools and public buildings where low cost and high thermal performance is required. The system can be used in conjunction with the commercial entrance doors and window inserts as required. The thermal break is provided by 36mm wide polyamide strips PA 66 GF25
Materials:Aluminium profiles are extruded from alloy 6060/6063 T6 complying with the recommendations of BS EN 12020-2
Finishes:
Mill finish
Etched and anodised to BS 3987: 1991 (01.06.2007) - Silver AA25 or colours on request.
Polyester Powder coat paint to BS EN 12206-1:2004. See separate list for standard colour range available.
Construction:Aluminium profiles are square cut mechanically jointed and secured using stainless steel screws driven into extruded screw splines. All joints should be sealed against water penetration.
Glass, Glazing and Infil Panels:The double glaze framework can accommodate 28 and 32mm thick double glazing units. The system will also accommodate solid infil panels to customers own specification and supply.The thermal performance of the IGU or panel (Ug) should be matched along with the performance of the frame work (Uf) to achieve an overall u-value as required.All glass panels should be secured in framework with glazing gaskets extruded from TPE. Glazing to be carried out in strict accordance with BS 6262 and BS 6206 with particular attention being taken to risk areas, which would require safety glass.
Installation and Fixing:The fixing of all framework is by generic frame fixing screws through the glazing pocket supported by the fixing bridge KAS729. It is not recommended that fixing holes are pre-drilled, as site conditions may affect their position. The fixing bridge will also help to eliminate local frame distortion. All fixing screws must be stainless steel or cadmium plated finish.
0.0331 W/mK 0.0326 W/mK
0.0356 W/mK 0.0323 W/mK 0.0349 W/mK Edge U-value (W/mK)
Therm version (5.2.14) & modelled in accordance with BS EN ISO 10077-2:2003
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
2.69 W/m2K Head Transom
KESTRELALUMINIUM SYSTEMS
Thermal performance
Mullion Jamb
Cill Transom Transom
Mullion Frame element
2.77 W/m2K
2.68 W/m2K 2.62 W/m2K
2.77 W/m2K Frame U-value (W/m2K) Uf
01.01.10
10.01.01Sheet 1
28mm IGU
Panel = 1.0309 W/m2K
IGU = 1.1 W/m2K Ug Warm edge spacer bar (4/20/4)
g
Thermal Framing System - Product SpecificationKestrel Aluminium Systems© Thermal Framing System
© Kestrel Aluminium Systems Thermal Framing System
Thermal Performance – Therm Software images
Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and
specifications without prior notice.
10.01.01
Sheet 2 01.11.14
Thermal Framing System - Typical Transom detail – Therm Version 5.2.14
Uframe = 2.62 W/m2K ψedge = 0.0356 W/mK
The image above shows a typical transom arrangement with a 28mm IGU (insulating glass unit) with a temperature range of 0°C externally (the left hand side) and 20°C internally (the right hand side). The colour legend shows the temperature fluctuations across the construction, the red shading giving a nominal internal temperature of 15.5°C. By direct comparison to standard non thermal GFT framing the internal temperature would be approximately 6.4°C.
Therm image – NON thermal GFT DG Transom KAS48 and KAS44 bead
© Kestrel Aluminium Systems Thermal Framing System
Thermal Performance – Therm Software images
Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and
specifications without prior notice.
10.01.01
Sheet 3 01.11.14
Thermal Framing System - Typical Mullion detail – Therm Version 5.2.14
U-frame = 2.77 W/m2K ψ-edge = 0.0349 W/mK
Thermal Framing System - Typical cill detail – Therm Version 5.2.14
U-frame = 2.68 W/m2K ψ-edge = 0.0331 W/mK
The low frame and edge U-value figures and high internal frame temperatures provide for excellent thermal performance when combined with a correctly specified IGU or non vision panel, and greatly reduced condensation risk to the internal frame parts. Overall U-values should be calculated in accordance with CAB Guide for assessment of the thermal performance of Aluminium curtain wall framing. Appendix A. Assessment of thermal properties of the façade.
39
Scale 1.1
Sheet 1
10.02.01ALUMINIUM SYSTEMSKESTREL Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and specifications without prior notice.
KAS722 - 1/2 Mullion (corner section)
01.01.10
62102
KAS721 - Mullion box
Deep24.6
10262
KAS722
Shallow
Deep
1624
.6
55
38
KAS721
Thermal Framing System
Section IDKestrel Aluminium Systems©
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS 01.01.10Sheet 1
10.02.02
KAS724 - Door head and door jamb adapter
Scale 1.1
101.562
62102
KAS726 - Transom bead
KAS723 - Transom box
KAS72422
.5
38KAS723
KAS726
55
Shallow 16
Deep 24.6
Kestrel Aluminium Systems© Thermal Framing System
Section ID
40.5
ALUMINIUM SYSTEMSKESTREL Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and specifications without prior notice.
10.02.03Sheet 1 01.01.11
KAS729
KAS729 - Fixing bridge (Black PVC)
12
15.5
Scale 1.1
109.5
27.95
KAS727 - Mullion or Transom plate
KAS727
102.75
23
8
KAS725 - Stub cill
KAS725
18
23
Kestrel Aluminium Systems©
Section IDThermal Framing System
KAS728
KAS728 - Aluminium Pocket filler
41.75
12.3
Thermal Framing System
Section Properties
KESTRELALUMINIUM SYSTEMS
10.02.0401.01.10Sheet 1
Kestrel Aluminium Systems©
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
Scale n/a
KAS727
KAS724
KAS723
Profile
KAS721
KAS722
y
x
y
x
1.1140102mm 0.793
74.47
48.56
79.17
102mm
102mm
102mm
13.88
9.52
15.52
0.6694
16.79
3.53
13.24
84.82
Ixx(cm4)
102mm
Type
16.63
Zxx(cm3)
20.65
Zyy(cm3)
Iyy(cm4)
6.59
6.52
5.60
2.73
0.405
x
x
yy
x
x
y y
x
x
y y
x
x
y y
62
10
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover
KESTRELALUMINIUM SYSTEMS
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice. 01.01.10Sheet 1
10.03.01
** Do not connect frames so two shallow pockets oppose each other.
Always configure framing to have a deep and shallow pocket opposite or at jambs - two deep pockets opposing.
Scale 1.1
10.03.01A
KAS727
No 10
Fixed Glazing
28
Typical Elevation
10.03.01A
55
**
No 10
KAS721
A10.03.01
Kestrel Aluminium Systems©
Typical Details - MullionThermal Framing System
10
62
�13
KAS727 (mill finish)
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL
�8
01.01.10
10.03.02Sheet 1
Fixing hole
Scale 1.1
Clearance hole
A10.03.02
No 10
Clearance hole
55
KAS729
Fixing shims as necessaryFixing hole
KAS721
Typical ElevationFixed Glazing
A10.03.02
Kestrel Aluminium Systems©
** Do not connect frames so two shallow pockets oppose each other.
Always configure framing to have a deep and shallow pocket opposite or at jambs - two deep pockets opposing.
**
KAS729 - Fixing bridge (Black PVC)
Thermal Framing System
Typical Details - Jamb
5518
10.03.03KESTRELALUMINIUM SYSTEMS
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
Drain
KAS725
Cill end plate KAS229-725
KAS488-150 FIXING LUG
No 10
KAS723No 10
(mill)KAS727
Sheet 1 01.01.10
Scale 1.1
102
10 KAS726
No 10
28
A10.03.03
Outside
10.03.03
Fixed Glazing Typical Elevation
A
Thermal Framing System
Typical Details - Cill © Kestrel Aluminium Systems
See drawing 11.03.01_1
KA
S729
55
No 10
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS 01.01.10
10.03.03Sheet 2
18
181
7
KAS625
4
Scale 1.1
KAS621
KAS723
No 10
KAS727(mill)
No 10
4
18
156
7
102
KAS726
A10.03.03
KAS624 KAS621
55
KAS723
No 10(mill)
No 10
KAS727
KAS726
10.03.03A
No 10
Kestrel Aluminium Systems©
102
Typical Details - Alternative cillsThermal Framing System
Cill end plate KAS229-624
Cill end plate KAS229-625
KA
S729
KA
S729
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS
10.03.03Sheet 3 01.11.14
Scale 1.1
4
18
152
55
KAS723
No 10
KAS726
10.03.03A
(mill)
No 10
KAS727
No 10
Typical Details - Alternative cills
102
© Kestrel Aluminium Systems Thermal Framing System
New door cill KAS622
KA
S72
9
55
KAS723
No 10
KAS726
10.03.03A
(mill)
No 10
KAS727
No 10
102K
AS
729
KAS 229 PB 131 (Black end caps)KAS229 PW 131 (White end caps)
177
KAS 229 PB 131 (Black end caps)KAS229 PW 131 (White end caps)
New door cill KAS629 4
18
55
10
KESTRELALUMINIUM SYSTEMS
10.03.0401.01.10
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice. Sheet 1
Scale 1.1
No 10
KAS723
No 10
KAS727
Typical ElevationFixed Glazing
Outside
10
102
KAS726
No 10
A10.03.04
28
A10.03.04
10.03.04A
Kestrel Aluminium Systems© Thermal Framing System
Typical Details - Transom
102
28
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS
10.03.05A
Sheet 1
10.03.0501.01.10
Scale 1.1
102
KAS72610
No 10
KAS723Outside
Typical ElevationFixed Glazing
A10.03.05
Kestrel Aluminium Systems©
55
No 10
No 10
(mill)KAS727
Thermal Framing System
Typical Details - Head with KAS723
KA
S729
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL
102
28
10.03.06A
01.01.10Sheet 1
10.03.06Scale 1.1
55
102
10
KAS721
No 10 No 10
No 10
(mill)KAS727
Outside
No 10
(mill)KAS727
Fixed Glazing Typical Elevation
10.03.06A
Typical Details - Head with KAS721Kestrel Aluminium Systems© Thermal Framing System
10
KESTRELALUMINIUM SYSTEMS
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
10.03.07Sheet 1 01.01.10
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover22
38.1
A
KAS383a 38mm x 3.2mm flat cover trim pre-fixed one side with No8 csk screws top and bottom
Bed cover trims in sealant when fixing and when installing
Scale 1.1
10.03.01
3.2
No 8
No 10
50100
28
39
No 8
No 10
KAS722
Typical ElevationFixed Glazing
A10.03.07
Kestrel Aluminium Systems©
Typical Details - Double mullion (movement joint)Thermal Framing System
99
141
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL 10.03.08Sheet 1 01.01.10
3.2
No 8
Scale 1.1
3.2mm pressed trim
Curved trim optional
Insulate corner
Fixed Glazing
Corner brackets (100mm) pre-fixed one side only - ditto KAS307
39
KAS722
No 8
No 10
KAS307
Typical Elevation
A10.03.08
No 10
KAS722
1010
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover
28
10.03.08A
Typical Details - Corner postKestrel Aluminium Systems© Thermal Framing System
No 8
No 8
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL 10.03.08Sheet 2 01.05.10
Scale 1.1
Insulate corner
Fixed Glazing
39
KAS722
No 8
No 10
KAS307
Typical Elevation
A10.03.08
No 10
KAS722
10
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover
28
10.03.08A
Typical Details - Corner postKestrel Aluminium Systems© Thermal Framing System
No 8
No 8
KAS76
62
Cut back corner of KAS76 as shown to create corner trim
Seal here
102
100
125
125
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL 10.03.08Sheet 3 01.01.10
Scale 1.1
Fixed Glazing
KAS727
No 10
Typical Elevation
A10.03.08 No 10
KAS727
10
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover
28
10.03.08A
Typical Details - Corner post - KAS719Kestrel Aluminium Systems© Thermal Framing System
KAS719KAS727
KAS727
23
5517
KESTRELALUMINIUM SYSTEMS
10.03.09Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice. Sheet 1 01.02.10
102
28
Scale 1.1
KAS32
24.6
22.5
50
See
10.0
3.09
she
et 2KAS93
Doo
r jam
b st
ops
here
KAS12
62
KAS24
between main mullionsFanlight adapter runs
KAS724
1.5
No 10 No 10
10 KAS726
Outside
KAS726
Kestrel Aluminium Systems© Thermal Framing System
Typical Details - Door header bar
KA
S724
- D
oor j
amb
- See
10.
03.1
0 sh
eet 1
KAS721/727 - mullion section
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS
10.03.09Sheet 2 01.02.10
Dotted line denotes separate goal post door frame - Can be installed and fixed independently of main framing
Scale 1.1
Doo
r rai
l
55
Typical Details - Door header bar - Part elevation
KAS723
KAS726
Kestrel Aluminium Systems©
M6
KAS93 header bar (fixed to KAS724 jamb)
Door stile
KAS724 - Adapter section (fixed to mullion)
KAS726 bead
Thermal Framing System
55
KAS29
100
102
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL
28
17 KAS32
Sheet 1 01.02.10
Scale 1.1
10.03.10
Typical Details - Door Jamb (Locking stile)
KA
S729
79
55
KAS724
No 10KAS727
KAS721
Kestrel Aluminium Systems©
No 10
Thermal Framing System
1.5
KAS494.31
KAS508
KAS504
55
10.03.10Scale 1.1
Sheet 2
KESTRELALUMINIUM SYSTEMS
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
17
28
102
100
KAS32
KAS29
01.02.10
NON thermal doorjamb shown asalternative
55
81.5
KA
S729
KAS5KAS40 KAS45
KAS727No 10 No 10
KAS721
Thermal Framing System
Typical Details - Door Jamb (Locking stile)Kestrel Aluminium Systems©
KAS494.31
KAS504
KAS508
55
KAS29
100
102
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL
28
17 KAS32
Sheet 3 01.01.11
Scale 1.1
10.03.10
Typical Details - Door Jamb (Locking stile)
55
No 10KAS727
KAS721
Kestrel Aluminium Systems©
No 10
Thermal Framing System
KAS728
KAS504
5
KAS727
KAS728 aluminium pcket infill
55
28
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTRELSheet 1 01.02.10
Scale 1.1
10.03.11
No 10
KAS727
KAS721
KA
S729
No 10
97
70
KAS96
No 10
KAS724
22.5
KAS27
17 KAS32
Kestrel Aluminium Systems© Thermal Framing System
Typical Details - Door Jamb (hinge stile)
1.5
KAS494.31
KAS494.45
55
28
ALUMINIUM SYSTEMSKESTREL Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and specifications without prior notice. Sheet 2 01.02.10
Scale 1.1
10.03.11
No 10
KAS721
KAS727Outside
No 10KA
S729
97
70
KAS40
No 10NON thermal doorjamb shown asalternative
KAS45
KAS5
KAS96
25
KAS67
KAS3217
KAS 67 Flat face safety stile - Use with face fitted hardware. Open out single action doors only.
Typical Details - Door Jamb (hinge stile)Kestrel Aluminium Systems© Thermal Framing System
1.5
KAS494.45
No 8
55
28
ALUMINIUM SYSTEMSKESTREL Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and specifications without prior notice. Sheet 3 01.01.11
Scale 1.1
10.03.11
No 10
KAS721
KAS727Outside
No 10
97
70
KAS728
KAS96
KAS67
KAS3217
KAS 67 Flat face safety stile - Use with face fitted hardware. Open out single action doors only.
Typical Details - Door Jamb (hinge stile)Kestrel Aluminium Systems© Thermal Framing System
KAS494.45
No 8
KAS728 aluminium pcket infill
See 11.03.01_1 for preparation detailsKAS725 to run continuously under door threshold and frame mullions
ALUMINIUM SYSTEMSKESTREL
23
Outside
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice. 01.01.10Sheet 1
Scale 1.1
10.03.12
30.5
12.5
No 10KAS725
KAS18
102
102
KAS724
KAS724
Threshold with no subcill
12.5
No 10
KAS19
Kestrel Aluminium Systems©
Typical Details - Door thresholdThermal Framing System
Cill end plate KAS229-725
10
144.5
74.5
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
KESTRELALUMINIUM SYSTEMS
55
1.5A
10.03.13
Outside
KAS727
No 10
10.03.1301.01.10Sheet 1
Scale 1.1
New 60mm polyamide open out casement window shown
55
KAS729
No 10
KAS721
Fixed Glazing Typical Elevation
10.03.13A
Kestrel Aluminium Systems©
Typical Details - Vent insertsThermal Framing System
KAS494.45
144.
5
74.5
55
10.03.14ALUMINIUM SYSTEMSKESTREL Due to our policy of continued improvement Kestrel
Aluminium Systems reserve the right to alter details and specifications without prior notice.
KAS727 KAS727
10
10.03.14A
10
No 10
No 10
KAS721
KA
S729
1.5
01.01.10Sheet 1
Scale 1.1
In line PTO handle
New 60mm polyamide open out
28Typical Elevation
Outside
Fixed Glazing casement window shown
10.03.14A
Thermal Framing System
Typical Details - Vent inserts© Kestrel Aluminium Systems
KA
S494
.45
55
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.ALUMINIUM SYSTEMS
KESTREL01.01.10Sheet 1
10.03.15Scale 1.1
24
38
Transom
5
KAS723
KAS726
9
24mm glazingKAS471 & new 9.00mm wedge gasket
10mm edge cover
See Euroseal AW709 part numberKAS727
38
38
Transom
28
5
KAS723
KAS726 28mm glazingKAS471 & KAS476 gaskets
10mm edge cover555
KAS727
32
Transom
3
KAS723
KAS726
55
32mm glazingKAS473 & KAS478 gaskets
10mm edge cover3
KAS727
Kestrel Aluminium Systems©
Typical Details - Glazing optionsThermal Framing System
150
125.
4
Sheet 1
Scale 1.1
10.03.16
KAS718 Auto Header Bar
Section Properties:
Ixx = 325.8353 cm4Zxx = 52.5626 cm3
Iyy = 570.2246 cm4Zyy = 72.7327 cm3
KESTRELALUMINIUM SYSTEMS
62
101.5
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
Inte
rnal
fixi
ng z
one
Ext
erna
l fac
e
01.01.14
Thermal Framing System
Line of vertical mullions
Kestrel Aluminium Systems©
KAS718
KAS726
External bead
KAS718
125.
4
150
62
101.5
ALUMINIUM SYSTEMSKESTREL
Inte
rnal
fixi
ng z
one
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
10.03.16Scale 1.1
Sheet 2 01.01.14
KAS728
Ext
erna
l fac
e
KAS718
Kestrel Aluminium Systems©
KAS726
External bead
Thermal Framing System
Line of vertical mullions
KAS718
125.
4
189
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
102
KAS722 added to increase transom depth if necessary
KESTRELALUMINIUM SYSTEMS
KAS722
KAS728
Inte
rnal
fixi
ng z
one
39
Scale 1.1
10.03.16Sheet 3 01.01.14
Ext
erna
l fac
e
Kestrel Aluminium Systems©
KAS718
Thermal Framing System
Line of vertical mullions
KAS726
External bead
KAS718
KAS631
20
28
7
23.5
7
4
85
65
14
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice.
© Kestrel Aluminium Systems
ALUMINIUM SYSTEMSKESTREL
Vertical section through door head and closure rail.Thermal Framing System
10.03.16Scale 1:1
Sheet 4
KAS762
Lin
e o
f ve
rtic
al f
ram
e b
ehin
d.
Lin
e o
f ve
rtic
al f
ram
e b
ehin
d.
KAS726
KAS718
KA
S28
2
KA
S46
7
01.11.14
KAS728
10
28mm glazingKAS471 & KAS476 gaskets
10mm edge cover
KESTRELALUMINIUM SYSTEMS
Due to our policy of continued improvement Kestrel Aluminium Systems reserve the right to alter details and specifications without prior notice. 01.11.14Sheet 1
10.03.17
** Do not connect frames so two shallow pockets oppose each other.
Always configure framing to have a deep and shallow pocket opposite or at jambs - two deep pockets opposing.
Scale 1.1
10.03.01A
KAS727
No 10
Fixed Glazing
28
Typical Elevation
10.03.01A
55
**
No 10
KAS717
Kestrel Aluminium Systems©
Typical Details - Mullion KAS717Thermal Framing System
62
152
Section PropertiesKAS717 (excludes KAS727).
Ixx = 436.6198 cm4Iyy = 65.2100 cm4Zxx = 54.8907 cm3Zyy = 22.8248 cm3