product selection guide - supreme lock€¦ · · 2011-04-18non-handed • adjustable power range...
TRANSCRIPT
DOOR CLOSERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
LOCKSETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
DEADLOCKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
HINGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
EXIT DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Lockset function guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Exit device function guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Size charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Finish guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
PRODUCT SELECTION GUIDE • TABLE OF CONTENTS
Non-handed • Adjustable power range 2 thru 6 • Optional barrier free
model adjustable power range 1 thru 4 with adjustable delayed action
valve, meets ADA requirements • Factory preset to size 3 • Power
adjustable arm bracket • Maximum 180° opening angle • Precision
cast aluminum alloy housing • Rack and pinion mechanism • Tri-pack
for regular, parallel arm and top jamb installation • Non-critical
thermostatic valves • High quality non-gumming and non-freezing
hydraulic fluid • Separate adjustable sweep and latching speed
valves • Optional adjustable hold open function 90°-170°• Adjustable backcheck control from 70°- 85° • Full body metal cover
included • Finishes: metallic aluminum, brass plated or dark
bronze • Complies with ANSI A156.4 Grade 1 • cUL and UL listed • 10 year limited warranty
POWER ADJUSTABLE DOOR CLOSERS, GRADE 1 • EXCEPTIONAL PERFORMANCE FOR HIGH TRAFFIC APPLICATIONS
4
POWER ADJUSTABLE DOOR CLOSERS • EXCEPTIONAL DOOR CONTROL FOR MODERATE TRAFFIC APPLICATIONS
DO
OR
CLO
SERS
Non-handed • Adjustable power range 2 thru 5 • Optional barrier
free model adjustable power range 1 thru 4 meets ADA
requirements • Factory preset to size 3 • Power adjustable arm
bracket • Maximum 180° opening angle • Tri-pack for regular,
parallel arm and top jamb installation • Precision cast aluminum alloy
housing • Rack and opinion mechanism • Non-critical
thermostatic valves • High quality non-gumming and non-freezing
hydraulic fluid • Separate adjustable sweep and latching speed
valves • Narrow profile plastic cover included • Adjustable backcheck
control from 70° - 85° • Finishes: metallic aluminum, brass plated or
dark bronze • cUL and UL listed • 5 year limited warranty
MODELNUMBER
MAXIMUM DOOR WIDTHBACKCHECK HOLD OPEN
DELAYEDACTION
BARRIERFREE
COVER FINISHCASE
INTERIOR EXTERIOR QTY LBS / KG
1900 BF1 to 4 60”
(1524mm)48”
(1219mm)YES OPT
YES YES
YES
AL
6
56.6 / 25.7
19002 to 6
N/A N/A AL, BP, DU 57.2 / 25.9
MODELNUMBER
MAXIMUM DOOR WIDTHBACKCHECK
BARRIERFREE
COVER FINISHCASE
INTERIOR EXTERIOR QTY LBS / KG
1700 BF1 to 4 60”
(1524mm)48”
(1219mm)YES
YES
YES
AL
10
70.8 / 32.1
17002 to 5
N/A AL, BP, DU 70.0 / 31.8
GX1BNon-handed • For 1 3/8 (35mm) to 2 (51mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI
A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • 9/32” (7mm) removable studs • One piece stainless steel knobs • 3” (76mm) rose diameter • Rose
cover conceals mounting plate and screws • Stainless steel
1/2” (13mm) latch bolt throw • Easy installation for new
construction or retrofit • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire rating • 1 year mechanical limited warranty
H E A V Y - D U T Y K N O B L O C K S E T S • C O N F O R M S T O A N S I A 1 5 6 . 2 G R A D E 1 • 3 H O U R c U L F I R E R A T I N G
5
LOC
KS
ETS
DO
OR
CLO
SERS
Non-handed • Sized 1, 2, 3, 4 or 5 • Universal retrofit hole spacing • Power adjustable arm bracket • Maximum 180° opening angle • Tri-pack for regular, parallel arm and top jamb installation • Precision cast aluminum alloy housing • Rack and pinion mechanism• Non-critical thermostatic valves • High quality non-gumming and
non-freezing hydraulic fluid • Separate adjustable sweep and
latching speed valves • Optional adjustable backcheck control from
70°- 85° • Finishes: metallic aluminum, dark bronze or sprayed gold• cUL and UL listed • 5 year limited warranty
SIZED DOOR CLOSERS • RECOMMENDED FOR RESIDENTIAL & COMMERCIAL APPLICATIONS WITH MODERATE TRAFFIC
MODELNUMBER
MAXIMUM DOOR WIDTHDOOR WEIGHT RANGE BACKCHECK FINISH
CASE
INTERIOR EXTERIOR QTY LBS / KG
75132”
(813mm)N/A 33 - 80 lbs (15 - 36 kg)
N/A
AL, BP, DU
10
42.4 / 19.2
75236”
(914mm)32”
(813mm)55 - 100 lbs (25 - 45 kg) 61.0 / 27.6
75344”
(1118mm)36”
(914mm)90 - 145 lbs (41 - 66 kg) 63.6 / 28.8
75448”
(1219mm)44”
(1118mm)125 - 190 lbs (57 - 86 kg) 784 66.2 / 30.0
75552”
(1321mm)48”
(1219mm)175 - 265 lbs (80 - 120 kg) 785 AL, DU 66.6 / 30.2
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
GX1B 10 Passage
C32D 20
60.2 / 27.3
GX1B 42 Privacy 61.0 / 27.7
GX1B 53 Entrance 65.0 / 29.5
GX1B 70 Classroom 67.4 / 30.6
GX1B 80 Storeroom 65.2 / 29.6
6
LOC
KSE
TS
Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),
3 3/4” (95mm), 5” (127mm) backsets available • Fits ANSI A115.2
(160 or 161) door prep • Solid brass 6-pin tumbler cylinder • Standard
SC keyway; optional WR keyway • Wide variety of functions available• 3” (76mm) rose diameter • Rose cover conceals mounting plate and
screws • Easy installation for new construction or retrofit • Conforms to
ANSI A156.2 series 4000, Grade 2 • 3 hour cUL fire rating • 1 year
mechanical limited warranty
STANDARD DUTY KNOB LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000 GRADE 2 • 3 HOUR cUL FIRE RATING
GX1L
HEAVY-DUTY 5” (125mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 GRADE 1 • 3 HOUR cUL FIRE RATING
Non-handed • For 1 3/8” (35mm) to 2 (51mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI
A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Small format interchangeable core model
available • Keyed functions are clutched • Wide variety of functions
available • Non-removable steel thru-bolt mounting posts • Large
3 1/2” (89mm) rose diameter • Rose cover conceals mounting plate
and screws • Stainless steel 1/2” (13mm) latch bolt throw • Easy installation for new construction or retrofit • Meets ADA
requirements • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire
rating • 1 year mechanical limited warranty
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
TL 10 Passage
C32D, C3 20
42.0 / 19.1
TL 15 Exit 36.8 / 16.7
TL 17 Single dummy trim 12.4 / 5.6
TL 32 Patio 40.6 / 18.4
TL 42 Privacy 44.2 / 20.0
TL 53 Entrance 48.4 / 22.0
TL 53 LC Entrance, less core 44.0 / 20.0
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
TL 60 Store
C32D, C3 20
53.0 / 24.0
TL 70 Classroom 50.0 / 22.7
TL 79 Institution exit 43.0 / 19.5
TL 80 Storeroom 48.2 / 21.9
TL 80 LC Storeroom, less core 44.8 / 20.3
TL 82 Institution or utility 51.4 / 23.3
TL 94 Hotel or motel 49.2 / 22.3
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
GX1L 10 Passage
C26D 6
30.0 / 13.6
GX1L 42 Privacy 31.6 / 14.3
GX1L 53 Entrance 32.6 / 14.8
GX1L 53 IC Entrance IC, less core 33.4 / 15.2
GX1L 70 Classroom 32.8 / 14.9
GX1L 70 IC Classroom IC, less core 31.6 / 14.4
GX1L 80 Storeroom 32.0 / 14.5
GX1L 80 IC Storeroom IC, less core 30.8 / 14.0
Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI
A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Wide variety of functions available• Removable steel thru-bolted mounting posts • Large 3 1/2” (89mm)
rose diameter • Rose cover conceals mounting plate and screws• Easy installation for new construction or retrofit • Conforms to
ANSI A156.2 series 4000, Grade 2 • Meets ADA requirements• 3 hour cUL fire rating • 1 year mechanical limited warranty
HEAVY-DUTY 4 1/2” (114mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING
Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) • Fits ANSI
A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler cylinder• Standard SC keyway • Wide variety of functions available• Removable steel thru-bolted mounting posts • Large 3 1/2” (89mm)
rose diameter • Rose cover conceals mounting plate and screws• Easy installation for new construction or retrofit • Conforms to
ANSI A156.2 Series 4000, Grade 2 • Meets ADA requirements • 3
hour cUL fire rating • 1 year mechanical limited warranty
HEAVY-DUTY 4 1/2” (114mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING
7
LOC
KSE
TS
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
FH 10 Passage C26D, C3 12 45.4 / 20.6
FH 17 Single dummy trim C26D 40 54.3 / 24.6
FH 42 PrivacyC26D, C3
12
46.0 / 20.9
FH 53 Entrance 49.0 / 22.2
FH 53 -O Entrance with clutchC26D
48.2 / 21.9
FH 60 Store 51.5 / 23.4
FH 70 ClassroomC26D, C3
50.4 / 22.9
FH 80 Storeroom 49.0 / 22.2
FH 80 -O Storeroom with clutchC26D
48.6 / 22.0
FH 82 Institution or utility 50.2 / 22.8
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
FC 10 Passage
C26D, C3
12 43.8 / 19.9
FC 17 Single dummy trim 40 52.4 / 23.8
FC 42 Privacy
12
45.2 / 20.5
FC 53 Entrance47.2 / 21.4
FC 53 -O Entrance with clutchC26D
FC 60 Store 50.4 / 22.9
FC 70 ClassroomC26D, C3
49.2 / 22.3
FC 80 Storeroom 48.0 / 21.8
FC 80 -O Storeroom with clutchC26D
47.6 / 21.6
FC 82 Institution or utility 49.2 / 22.3
Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness• Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),
3 3/4” (95mm), 5” (127mm) • Fits ANSI A115.2 (160 or 161) door
prep • Solid brass 6-pin tumbler cylinder • Standard SC keyway;
optional WR keyway • Wide variety of functions available • 3” (76mm) rose diameter • Rose cover conceals mounting plate and
screws • Easy installation for new construction or retrofit • Conforms to ANSI A156.2 series 4000, Grade 2 • Meets ADA
requirements • 3 hour cUL fire rating • 1 year mechanical limited
warranty
STANDARD DUTY 4” (102mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING
STANDARD DUTY 3 1/2” (89mm) LEVER LOCKSETS • CONFORMS TO ANSI A156.2 SERIES 4000, GRADE 2 • 3 HOUR cUL FIRE RATING
Non-handed • For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset 2 3/4” (70mm); optional 2 3/8” (60mm),
3 3/4” (95mm), 5” (127mm) • Fits ANSI A115.2 (160 or 161) door
prep • Solid brass 6-pin tumbler cylinder • Standard SC keyway • Wide variety of functions available • 3” (76mm) rose diameter • Rose cover conceals mounting plate and screws • Easy installation
for new construction or retrofit • Conforms to ANSI A156.2 series
4000, Grade 2 • Meets ADA requirements • 3 hour cUL fire rating • 1 year mechanical limited warranty
8
LOC
KSE
TS
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
EM 10 Passage C26D, C310
26.2 / 11.9
EM 15 Exit C26D 15.4 / 7.0
EM 17 Single dummy trim
C26D, C3
20 15.0 / 6.8
EM 42 Privacy
10
27.4 / 12.4
EM 52Entrance
27.8 / 12.6
EM 53 29.8 / 13.5
EM 53 LC Entrance, less core 27.8 / 12.6
EM 60 Store C26D 30.4 / 13.8
EM 70 Classroom C26D, C3 30.0 / 13.6
EM 79 Institution exit C26D 25.4 / 11.5
EM 80 Storeroom C26D, C329.8 / 13.5
EM 82 Institution or utility C26D
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
EL 10 Passage
C26D
10 26.8 / 12.2
EL 17 Single dummy trim 20 15.2 / 6.9
EL 42 Privacy
10
27.6 / 12.5
EL 53 Entrance 29.6 / 13.4
EL 60 Store 31.0 / 14.1
EL 70 Classroom 30.6 / 13.9
EL 80 Storeroom 29.4 / 13.3
For 1 3/8 (35mm) to 2 1/4 (57mm) door thickness • Standard backset
2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) • Fits
ANSI A115.2 (160 or 161) door prep • Solid brass 6-pin tumbler
cylinder • Standard SC keyway; optional WR keyway • Solid brass
deadbolt, reinforced with hardened steel security roller, 1” (25mm)
bolt throw • Solid brass revolving 2 1/2” (64mm) ring diameter
cylinder guard • Conforms to ANSI A156.2 Grade 1 • 3 hour cUL fire
rating • 1 year mechanical limited warranty
For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness • Standard backset
2 3/4” (70mm); optional 2 3/8” (60mm) • Fits standard ANSI A115.2
(160 or 161) door prep • Solid brass 6-pin tumbler cylinder • Standard
SC keyway • Solid brass deadbolt, reinforced with hardened steel
security roller, 1” (25mm) bolt throw • Free spinning security insert
and trim rings, 2 9/16” (65mm) ring diameter • Easy installation with
template • Conforms to ANSI A156.5 Grade 2 • 3 hour cUL fire rating• 1 year mechanical limited warranty
H E A V Y D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 2 • 3 H O U R c U L F I R E R A T I N G
GX1A
H E A V Y - D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 1 • 3 H O U R c U L F I R E R A T I N G
9
DE
AD
LOC
KS
MODELNUMBER
DESCRIPTION FINISHCASE
QTY LBS / KG
GX1A 51Single cylinder deadbolt with inside
thumbturn, SC keyway
C3, C5, C15,C15A, C26D, V3
12 30.6 / 13.9
GX1A 51 WEISingle cylinder deadbolt with inside
thurbturn, WR keyway
MODELNUMBER
DESCRIPTION FINISHCASE
QTY LBS / KG
FHA 51Single cylinder deadlockwith inside thumbturn
C3, C26D 24
54.8 / 24.9
FHA 60 Double cylinder deadlock 67.0 / 30.4
10
P L A I N B E A R I N G T E M P L A T E B U T T H I N G E S • S U I TA B L E F O R L O W T O M O D E R A T E T R A F F I C A P P L I C A T I O N S
Non-handed • High quality steel base material • High grade plated
finishes • Non-rising removable pins • Non-removable pin (NRP)
available on all models • Standard flat top and knock-out bottom
tips • Standard template hole pattern • Quality wood screws and
undercut machine screws included • Optional feature: factory NRP
142SERIES
DE
AD
LOC
KS
HIN
GE
S
For 1 3/8 (35mm) to 1 3/4 (44mm) door thickness; optional
2 1/4” (57mm) • Standard backset 2 3/4” (70mm); optional
2 3/8” (60mm) and 5” (127mm) • Fits standard ANSI A115.2
(160 or 161) door prep and field adjustable to fit as small as a
1 1/2” (38mm) cross bore • Solid brass 6-pin tumbler cylinder • Standard SC keyway; optional WR keyway • Solid brass deadbolt,
reinforced with hardened steel security roller, 1” (25mm) bolt throw• Free spinning security insert and trim rings, 2 9/16” (65mm) ring
diameter • Easy installation with template • Conforms to ANSI
A156.5 Grade 2 • 3 hour cUL fire rating • 1 year mechanical
limited warranty
H E A V Y - D U T Y D E A D L O C K S • C O N F O R M S T O A N S I A 1 5 6 . 5 G R A D E 2 • 3 H O U R c U L F I R E R A T I N G
MODELNUMBER
FUNCTION FINISHCASE
QTY LBS / KG
TLA 51Single cylinder deadlockwith inside thumbturn
C3, C32D 20
43.6 / 19.8
TLA 60 Double cylinder deadlock 58.2 / 26.4
MODELNUMBER
SIZE FINISHMACHINESCREWS
WOODSCREWS
BOX / CASEQTY
CASELBS / KG
142 35353 1/2” x 3 1/2”
(88.9mm x 88.9mm)C15, C3M
#10-24 X 1/2”(12.7mm)
#9 X 1”(25.4mm)
3 / 60
40.2 / 18.2
142 444” x 4”
(101.6mm x 101.6mm)C15
#12 X 1 1/4”(31.8mm)
63.0 / 28.6
142 4544 1/2” x 4”
(114.3mm x 101.6mm)C15, C26, C3, C3M, C4 66.2 / 30.0
HEAVY-DUTY BALL BEARING TEMPLATE BUTT HINGES • SUITABLE FOR HIGH TRAFFIC INDUSTRIAL DOOR APPLICATIONS
1168SERIES
179SERIES
* 18-8 Stainless steel base material
* 18-8 Stainless steel base material with NRP
11
HIN
GE
S
Non-handed • High quality steel base material • High grade plated
finishes • Non-rising removable pins • Non-removable pin (NRP)
available on all models • Standard flat top and knock-out bottom
tips for 179 model • Flush top and bottom tips for CB179 model• Standard template hole pattern • Quality wood screws and undercut
machine screws included • Optional features: factory NRP, 18-8
stainless steel base material with NRP, “-A” 1/4” (6.4mm) or “-B”
5/32” (4.0mm) radius corners with NRP, choice of ball (BT) or steeple
(ST) removable tips
BALL BEARING TEMPLATE BUTT HINGES • RECOMMENDED FOR MODERATE TO HIGH TRAFFIC APPLICATIONS
Non-handed • High quality steel base material • High grade plated
finishes • Standard non-rising non-removable pin (NRP) • Standard
flat top and knock-out bottom tips • Standard template hole pattern • Quality wood screws and undercut machine screws included • Optional features: 18-8 stainless steel base material, “B”
5/32” (4.0mm) radius corners
MODELNUMBER
SIZE AND DESCRIPTION FINISHMACHINESCREWS
WOODSCREWS
BOX / CASEQTY
CASELBS / KG
179 35353 1/2” x 3 1/2”
(88.9mm x 88.9mm)BLR, C15, C1D, C26, C26D, C3M
#10-24 x 1/2”(12.7mm)
#9 x 1”(25.4mm)
3 / 60
39.6 / 18.0
179 444” x 4”
(101.6mm x 101.6mm)BLR, C15, C1D, C26,
C26D, C32D*, C3, C3M
#12-24 x 1/2”(12.7mm)
#12 x 1 1/4”(31.8mm)
58.0 / 26.3
179 4544 1/2” x 4”
(114.3mm x 101.6mm)BLR, BLR*, C15, C1D, C2G, C26,
C26D, C32D*, C3, C3M, C4, C5, CP65.8 / 29.8
179 45454 1/2” x 4 1/2”
(114.3mm x 114.3mm)C15, C32D*
71.2 / 32.3
179 555” x 5”
(127.0mm x 127.0mm)3 / 36 55.0 / 24.9
CB179 4544 1/2” x 4” (114.3mm x 101.6mm)
Concealed ball bearingC15, C32D*, C3, C3M 3 / 60 66.4 / 30.1
MODELNUMBER
SIZE FINISHMACHINESCREWS
WOODSCREWS
BOX / CASEQTY
CASELBS / KG
1168 4544 1/2” x 4”
(114.3mm x 101.6mm)C15, C32D*
#12-24 x 1/2”(12.7mm)
#12 x 1 1/4”(31.8mm)
3 / 60 85.2 / 38.6
S I N G L E A C T I N G S P R I N G H I N G E S • R E C O M M E N D E D F O R M O D E R A T E T O H I G H T R A F F I C A P P L I C A T I O N S
Non-handed • High quality steel base material • High grade plated
finishes • Nylon bearings provide silent action • Easily adjusted spring
tension • Standard template hole pattern • Pivot point aligns with
Dorex Pro hinges of same size • Spring tensioner included • Quality
wood screws and undercut machine screws (if applicable) included• cUL and UL listed • Optional features: 1/4” (6.4mm) or 5/8” (15.9mm)
radius corners
Handed • High quality steel base material • High grade plated
finish • Fixed pin • Standard flat top and bottom tips • Reinforces
sagging or unevenly hung doors • Pivot point aligns with Dorex Pro
4 1/2” x 4” (114.3mm x 101.6mm) hinges • All necessary mounting
hardware included
REINFORCEMENT PIVOT HINGES • SUITABLE FOR RETROFIT WOOD AND HOLLOW METAL DOOR APPLICATIONS
1265SERIES
3310SERIES
12
HIN
GE
S
MODELNUMBER
SIZE AND DESCRIPTION FINISHMACHINESCREWS
WOODSCREWS
BOX / CASEQTY
CASELBS / KG
3310 35353 1/2” x 3 1/2”
(88.9mm x 88.9mm) square corners
C15, C3 N/A
#9 x 3/4”(19.1mm)
2 / 40
32.0 / 14.5
3310 444” x 4”
(101.6mm x 101.6mm) square corners#10 x 3/4”(19.1mm)
36.6 / 16.6
3310 4544 1/2” x 4”
(114.3mm x 101.6mm) square cornersC15, C1D, C26,C3, C3M, C5
#12-24 x 1/2”(12.7mm)
#10 x 1”(25.4mm)
51.0 / 23.1
3311 444” x 4” (101.6mm x 101.6mm) 1/4” (6.4mm)
radius cornersC15, C3
N/A 36.6 / 16.6
3312 444” x 4” (101.6mm x 101.6mm)5/8” (15.9mm) radius corners
C3
MODELNUMBER
SIZE HANDING FINISH SCREWSBOX / CASE
QTYCASE
LBS / KG
1265 LH
3 1/4” x 6 1/8”(82.6mm x 155.7mm)
Left hand
Satin zinc platedAll necessary mounting
hardware included1 / 30 57.6 / 26.1
1265 RH Right hand
148SERIES
HALF SURFACE TEMPLATE BUTT HINGES • SUITABLE FOR MODERATE TO HIGH TRAFFIC DOOR APPLICATIONS
Handed • Field reversible • High quality steel base material • High
grade plated finish • Non-rising removable pins • Non-removable pin
(NRP) available • Standard flat top and screw-out bottom tips • Standard
template hole pattern • Increases accessibility for the handicapped
and /or disabled • Quality wood screws and undercut machine
screws included
SWING CLEAR TEMPLATE BUTT HINGES • DESIGNED TO WIDEN DOORWAYS FOR EASIER WHEELCHAIR ACCESSIBILITY
Handed • High quality steel base material • Standard non-rising
non-removable pin (NRP) • Standard flat top and knock-out bottom
tips • Installation consists of one leaf mortised in door jamb, the
other thru-bolted to surface of door • Standard template hole pattern
on mortised leaf • Quality wood screws / thru bolts & grommets and
undercut machine screws included
HALF MORTISE TEMPLATE BUTT HINGES • SUITABLE FOR MODERATE TO HIGH TRAFFIC DOOR APPLICATIONS
Handed • High quality steel base material • Standard non-rising
non-removable pin (NRP) • Standard flat top and knock-out bottom
tips • Installation consists of one leaf mortised in door edge, the
other secured to surface of door jamb • Standard template hole
pattern on mortised leaf • Quality wood screws and undercut
machine screws included
B73SERIES
B77SERIES
13
HIN
GE
S
MODELNUMBER
SIZE HANDING FINISH MACHINE SCREWS WOOD SCREWSBOX / CASE
QTYCASE
LBS / KG
148 454-L 4 1/2” x 4”(114.3mm x 101.6mm)
Left handC15
#12-24 x 1/2”(12.7mm)
#12 x 1 1/4”(31.8mm)
3 / 30 50.8 / 23.0148 454-R Right hand
MODELNUMBER
SIZE HANDING FINISH MACHINE SCREWS WOOD SCREWSBOX / CASE
QTYCASE
LBS / KG
B73 -L 4 1/2”(114.3mm)
Left handCP
#12-24 x 1/2”(12.7mm)
1/4” (6.4mm) - 20 x 2”(50.8mm) thru bolt
3 / 48 61.8 / 28.0B73 -R Right hand
MODELNUMBER
SIZE HANDING FINISH MACHINE SCREWS WOOD SCREWSBOX / CASE
QTYCASE
LBS / KG
B77 -L 4 1/2”(114.3mm)
Left handCP
#12-24 x 1/2”(12.7mm)
#12 x 1 1/4”(31.8mm)
3 / 60 58.6 / 26.6B77 -R Right hand
The Dorex Pro reinforcement and filler plate hinge accessories are
made from the highest quality metals offering complementary
installation options for wood, hollow metal and/or commercial
aluminum applications.
TEMPLATE REINFORCEMENT & FILLER PLATES FOR 4 1/2” X 4” (114.3mm x 101.6mm) HINGES
HINGEACCESSORIES
14
HIN
GE
SEX
IT D
EVIC
ES
Non-handed • Field sizable • Mounting type: rim or surface vertical
rod • Easy installation for both rim and vertical rod models • 2 3/4” (70mm) backset • Retrofit 161 door prep • Available for
36” (914mm) or 48” (1219mm) width doors • Optional exterior trim
available • Made from heavy gauge steel • Stainless steel latch bolts• Stainless steel springs • Finishes: metallic aluminum, polished brass
or stainless steel • Conforms to ANSI A156.3 Grade 2• Dogging by hex key on non-fire labeled device • cUL and UL
listed for Panic Hardware • F model (1 1/2 hr.) Fire Exit Hardware• 1 year limited warranty
TOUCH PAD EXIT DEVICES • AVAILABLE WITH A VARIETY OF EXTERIOR TRIM OPTIONS • SOPHISTICATED CONTOURED DESIGN
* Trims on page 16
MODELNUMBER
SIZE AND DESCRIPTION FINISH SCREWS HOLE SIZE(Screw are not included)
CASE
QTY LBS / KG
95107 15/16” x 1 3/16” (201.6mm x 30.2mm)
Template reinforcement plate, 3/32” (2.5mm) offset
ZP
#12-24
12 / 120 52.6 / 23.995117 15/16” x 1 3/16” (201.6mm x 30.2mm)
Template reinforcement plate, 1/16” (1.2mm) offset
95127 15/16” x 1 3/16” (201.6mm x 30.2mm)Template reinforcement plate, no offset
95154 1/2” x 1 1/2” (114.3mm x 38.1mm)
Template filler plateEXW, ZP 50 / 150 43.6 / 19.8
MODELNUMBER
TYPE DESCRIPTION DOOR WIDTH FINISHCASE
QTY LBS / KG
8500 “Panic Hardware”labelled models withtouch bar dogging
Rim exit device28” - 36” (711mm - 914mm) C28, C3, C32D
4
45.8 / 20.8
8500 - 48 36” - 48” (914mm - 1219mm)
C28, C32D
53.6 / 24.3
8500V Surface vertical rod exit device28” - 36” (711mm - 914mm)
64.0 / 29.0
8500F“Fire Exit Hardware”
labelled models,1 1/2 hour rating,
non-dogging
Rim exit device46.8 / 21.2
8500F - 48 36” - 48” (914mm - 1219mm) C28 54.2 / 24.6
8500VFSurface vertical rod exit device
28” - 36” (711mm - 914mm) C28, C3, C32D 65.8 / 29.8
8500VF - 48 36” - 48” (914mm - 1219mm) C28, C32D 73.8 / 33.5
15
C R O S S B A R E X I T D E V I C E S • S L E E K T R A D I T I O N A L C R O S S B A R D E S I G N F O R N A R R O W S T I L E D O O R S
Non-handed concealed vertical rod mounting type • Handed rim
mounting type • Field sizable • Easy installation • Available with
36” (914mm) or 48” (1219mm) width crossbar • 1185 model exterior
function using a mortise cylinder and Adams Rite cam (mounted on
#1170) • 1195 model exterior function using a rim cylinder• Heavy-duty lever arms and body • Extruded aluminum contoured
crossbar • Made from high tensile strength aluminum • Concealed
fastening • Stainless steel latch bolts • Stainless steel springs• Finishes: anodized aluminum or dark bronze • Dogging by slotted
key or outside cylinder • cUL and UL listed for Panic Hardware• 1 year limited warranty
Handed • Field reversible • Field sizable • Easy installation• 2 3/4” (70mm) backset • Retrofit 161 door prep • Available with
38” (965mm) or 48” (1219mm) width crossbar • Optional exterior trim
available • Made from heavy gauge steel • Stainless steel latch bolts• Stainless steel springs • Finish: metallic aluminum • Dogging by hex
key • Conforms to ANSI A156.3 Grade 2 • cUL and UL listed for
Panic Hardware • 1 year limited warranty
CROSSBAR EXIT DEVICES • AVAILABLE WITH A VARIETY OF EXTERIOR TRIM OPTIONS • IDEAL FOR MODERATE USE APPLICATIONS
EXIT
DEV
ICES
MODELNUMBER
FUNCTION DESCRIPTION FINISHCASE
QTY LBS / KG
NH900 -1 #1 Exit door only; no exterior trim
C28
12 72.8 / 33.0
NH900 -3 #3 Entrance by thumb piece, latch always free
6
46.4 / 21.0
NH900 -4 #4 Latch activated by key only from outside, door always locked 45.4 / 20.6
NH900 -5 #5 Latch activated by thumb piece,except when locked by outside key 47.2 / 21.4
MODELNUMBER
DESCRIPTION FINISHCASE
QTY LBS / KG
1185Concealed vertical rod exit device with 36” (914mm) crossbar,
non-handed; complete set
C20D, C28 6
44.8 / 20.4
1195Rim type exit device with 36” (914mm) crossbar,
handed (LHR or RHR); complete set28.6 / 13.0
* Includes separately packaged crossbars
Dorex 8500 series exterior trims are available in a wide variety of
styles and functions. These trims are ideal for moderate use wood
or hollow metal door applications. Dorex brand products are
recognized for value while delivering lasting performance.
T R I M S F O R 8 5 0 0 S E R I E S E X I T D E V I C E
EXIT DEVICETRIMS
8503 8504 8505 8500NL
8500NLS
8500DT
8500B
8500FH
8500FC
16
MODELNUMBER
FUNCTION DESCRIPTION FINISHCASE
QTY LBS / KG
8500 DT Function #2 Pull handle, painted steel
C28 40
42.8 / 19.5
8500 NL
Function #4
Cylinder trim pull handle, painted steel 42.0 / 19.1
8500 NLS Cylinder trim finger pull, stainless steel C32D 50 6.7 / 3.1
8503 Function #3Thumbgrip trim set, entrance bythumbpiece, reversable handing
C28, C3, C15 10
28.0 / 12.7
8504 Function #4Grip trim set, entrance by key(SC keyway)
29.2 / 13.2
8505 Function #5Thumbgrip trim set, entrance bythumbpiece except when locked by key(SC keyway), reversable handing
33.0 / 15.0
8510 B Passage
Knob assembly(compliments TL series knobsets)
N/A
C32D
20
29.6 / 13.48570 B Classroom
Solid brass 6-pin cylinder(drilled 6, pinned 5) SC keyway
8580 B Storeroom
8510 FC Passage
Lever assembly, curved return(compliments FC series leversets)
N/A C26D, C3
34.4 / 15.68570 FC Classroom
Solid brass 6-pin cylinder(drilled 6, pinned 5) SC keyway
C26D
8580 FC Storeroom
8510 FH Passage
Lever assembly, straight return(compliments FH series leversets)
N/A
35.6 / 16.18570 FH Classroom
Solid brass 6-pin cylinder(drilled 6, pinned 5) SC keyway
8580 FH Storeroom
SPEC
IFIC
ATIO
NS
17
CYLINDRICAL AND TUBULAR LOCKSET FUNCTION GUIDE
EXIT DEVICE FUNCTION GUIDE
79 DOREX | N/A ANSI
UTILITY OR CLOSET
Deadlocking latch bolt activatedby inside knob or key in outsideknob. Inside push-button preventsuse except by emergency key and projects visual occupancy indicator outside. Push-buttonreleased by closing door or turninginside knob. Outside knob alwaysfixed.
94 DOREX | F93 ANSI
HOTEL / MOTEL
Deadlocking latch bolt activatedby key in either side. Both knobsalways fixed.
82 DOREX | F87 ANSI
INSTITUTION OR UTILITY
Deadlocking latch bolt activatedby inside knob or key in outsideknob. Outside knob always fixed.
80 DOREX | F86 ANSI
STOREROOM
Deadlocking latch bolt activatedby knob from either side, exceptwhen outside knob is locked bykey. Outside knob locked orunlocked by key.
Deadlocking latch bolt locked orunlocked by key from outside.Blank plate inside.
Exit door only;no exterior trim
Entrance by trim when latch dogged
Entrance by thumbpiece,latch always free
Latch activated by key only from outside,
door always locked
Latch activated by thumbpiece, except when
locked by outside key
70 DOREX | F84 ANSI
CLASSROOM
Deadlocking latch bolt activatedby knob from either side, exceptwhen key used on either sidelocks or unlocks both sides.
60 DOREX | F91 ANSI
STORE
Similar to function 52, exceptbutton in inside knob can bepushed and turned to lock outsideknob, for entry by key only.Outside knob remains lockeduntil turn button manually reset.
53 DOREX | F109 ANSI
ENTRANCE
Deadlocking latch bolt activatedby knob from either side, exceptwhen inside push-button locksoutside knob. Push-buttonreleased by key or turninginside knob.
52 DOREX | F82 ANSI
ENTRANCE
Latch bolt activated by knobfrom either side, except wheninside push-button locks outsideknob. Push-button released byturning inside knob or closingdoor to prevent lock-out. Outsideknob has provisions for emergencyunlocking.
42 DOREX | F76 ANSI
PRIVACY
Deadlocking latch bolt activatedby knob from either side, exceptwhen inside push-button locksoutside knob. Push-button released by turning inside knob orclosing door to prevent lock-out.
32 DOREX | F77 ANSI
PATIO
Knob and rose for one side ofdoor to match other locksets.
17 DOREX | N/A ANSI
SINGLE DUMMY TRIM
Latch bolt activated by insideknob. Blank plate outside.
15 DOREX | N/A ANSI
EXIT
Latch bolt activated by knobfrom either side.
10 DOREX | F75 ANSI
PASSAGE OR CLOSET
#1 #2 #3 #4 #5
FUN
CTIO
N G
UID
E
Deadlocking latch bolt activatedby knob from either side,Outside or inside knobs can beindependent ly locked orunlocked.
72 DOREX | F80 ANSI
COMMUNICATING
Deadlocking latch bolt activatedby outside knob or from insidethumbturn, except when pushbutton in outside knob locksinside thumbturn. Thumbturnremains locked until push button is manually reset.
71 DOREX | F79 ANSI
COMMUNICATING
1900 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 1900 series. Closer shall be multi-size with spring power adjustment from sizes 2 thru 6. Closershall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. Closer shall be supplied with a non-handedfull body metal cover. Closer shall project no more than 3” (76mm) from the mounting surface. Closer shall have two non-critical thermostaticvalves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. Closer shall have an independentvalve to control the adjustable-cushioning backcheck. Brackets shall be supplied to permit regular, top jamb or parallel arm installation andstandard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fasteners. OPTIONAL: All Dorex1900BF series closers shall be multi-size with spring power adjustment from sizes 1 thru 4 and shall have an independent valve to controlthe delayed action.
1700 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 1700 series. Closer shall be multi-size with spring power adjustment from sizes 2 thru 5.Closer shall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. Closer shall be supplied with a non-handedmolded narrow profile cover. Closer shall project no more than 3” (76mm) from the mounting surface. Closer shall have two non-criticalthermostatic valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. Closer shall havean independent valve to control the adjustable-cushioning backcheck. Brackets shall be supplied to permit regular, top jamb or parallel arminstallation and standard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fasteners.OPTIONAL: All Dorex 1700BF shall be multi-size with spring power ajustment from 1 thru 4.
700 SERIES DOOR CLOSERSClosers for interior and exterior doors shall be Dorex 700 series rack and pinion type with cast aluminum alloy shell. Closer shall be reversable,surface mounted by 3/4”(19mm) hole spacing and shall project no more than 3” (76mm) from the door surface. Closer shall have twonon-critical thermostatic valves to separately control sweep and latch speeds. Closer shall contain non-gumming and non-freezing hydraulicfluid to allow constant closing speeds under extreme temperatures. Brackets shall be supplied to permit regular, top jamb or parallel arm installationand standard arm bracket shall allow 15% power adjustment. Closer shall be supplied with all necessary mounting fastners. OPTIONAL: AllDorex 780 closers shall have an independent adjustable valve to control backcheck cushioning to avoid uncontrolled door opening.
GX1B KNOBSETSAll bored locks shall be Dorex GX1B series. Locks shall meet the requirements of ANSI A156.2, Grade 1. Locks shall be adjustable for 1 3/8” (35mm) to 2” (51mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shall havestandard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.
TL SERIES KNOBSETSAll bored locks shall be Dorex TL series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm) and 5” (127mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.
GX1L SERIES LEVERSETSAll bored lever locks shall be Dorex GX1L series. Locks shall meet the requirements of ANSI A156.2, Grade 1. Locks shall be adjustable for1 3/8” (35mm) to 2” (51mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.
FH SERIES LEVERSETSAll bored lever locks shall be Dorex FH series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch bolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locks shallbe reversible and supplied with all necessary mounting fasteners. OPTIONAL: Lockset trim shall be thru-bolted.
FC SERIES LEVERSETSAll bored lever locks shall be Dorex FC series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall be adjustablefor 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Latch boltshall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1/2” (13mm) latch throw and UL listing for use on fire doors. Locksshall be reversible and supplied with all necessary mounting fasteners. OPTIONAL: Lockset trim shall be thru-bolted.
18
SPEC
IFIC
ATIO
NS
19
SPEC
IFIC
ATIO
NSEM SERIES LEVERSETS
All bored lever locks shall be Dorex EM series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall beadjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep).Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm), 5” (127mm) with 1/2” (13mm) latch throw andUL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.
EL SERIES LEVERSETSAll bored lever locks shall be Dorex EL series. Locks shall meet the requirements of ANSI A156.2 series 4000, Grade 2. Locks shall beadjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep).Latch bolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 3 3/4” (95mm), 5” (127mm) with 1/2” (13mm) latch throw andUL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.
GX1A SERIES DEADLOCKSAll bored deadlocks shall be Dorex GX1A series. Locks shall meet the requirements of ANSI A156.5, Grade 1. Locks shall be adjustable for 1 3/8” (35mm) to 2 1/4” (57mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shallhave standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) with 1” (25mm) bolt throw and UL listing for use on fire doors.Locks shall be reversible and supplied with all necessary mounting fasteners.
FHA SERIES DEADLOCKSAll bored deadlocks shall be Dorex FHA series. Locks shall meet the requirements of ANSI A156.5, Grade 2. Locks shall be adjustable for 1 3/8” (35mm) to 1 3/4” (44mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shall havestandard backset 2 3/4” (70mm); optional 2 3/8” (60mm) with 1” (25mm) bolt throw and UL listing for use on fire doors. Locks shall bereversible and supplied with all necessary mounting fasteners.
TLA SERIES DEADLOCKSAll bored deadlocks shall be Dorex TLA series. Locks shall meet the requirements of ANSI A156.5, Grade 2. Locks shall be adjustable for 1 3/8” (35mm) to 1 3/4” (44mm); optional 2 1/4” (57mm) door thickness. Locks shall fit standard 2 1/8” (54mm) cross bore (160 or 161 door prep). Deadbolt shall have standard backset 2 3/4” (70mm); optional 2 3/8” (60mm), 5” (127mm) with 1” (25mm) bolt throwand UL listing for use on fire doors. Locks shall be reversible and supplied with all necessary mounting fasteners.
142 SERIES HINGESAll full mortise plain bearing template butt hinges shall be Dorex Pro 142 series. Hinges shall be made from select quality steel base materials andhigh grade plated finishes. Hinges shall be of standard weight, have 5 knuckles with non-rising removable pins and standard flat top andknock-out bottom tips. Hinges shall have four square corners. Hinges shall be reversible and supplied with all necessary wood and undercutmachine mounting fasteners. OPTIONAL: Hinges shall have non-removable pin (NRP) security.
179 SERIES HINGESAll full mortise ball bearing template butt hinges shall be Dorex Pro 179 series. Hinges shall be made from select quality steel base materials andhigh grade plated finishes. Hinges shall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising removable pins andstandard flat top and knock-out bottom tips. Hinges shall have four square corners. Hinges shall be reversible and supplied with all necessarywood and undercut machine mounting fasteners. OPTIONAL: Hinges shall be made of 18-8 stainless steel base materials and have non-removable pin (NRP) security, 1/4” (6.4mm) or 5/32” (4.0mm) radius corners and have non-removable pin (NRP) security, choice of ball orsteeple removable tips. Concealed bearing hinges: All full mortise concealed bearing template butt hinges shall be Dorex Pro CB179 series,hinges shall have 3 knuckles, 2 concealed Slimline ball bearings and flush top and bottom tips. All other specifications same as 179 series.
1168 SERIES HINGESAll full mortise heavy-duty ball bearing template butt hinges shall be Dorex Pro 1168 series. Hinges shall be made from select quality steelbase materials and high grade plated finishes. Hinges shall be of heavy weight, have 5 knuckles, 4 Slimline ball bearings withnon-rising non-removable pin (NRP) security and standard flat top and knock-out bottom tips. Hinges shall have four square corners. Hingesshall be reversible and supplied with all necessary wood and undercut machine mounting fasteners. OPTIONAL: Hinges shall be made of 18-8stainless steel base materials, 5/32” (4.0mm) radius corners.
3310 SERIES HINGESAll full mortise single acting template spring hinges shall be Dorex Pro 3310 series. Hinges shall be made from select quality steel base materials and high grade plated finishes. Hinges shall be of standard weight, have 3 knuckles with silent action nylon bearings. Hinges shallhave four square corners. Hinges shall be reversible and supplied with spring tensioner and all necessary wood and undercut machine (if applicable) mounting fasteners. OPTIONAL: Hinges shall have 1/4” (6.4mm) or 5/8” (15.9mm) radius corners.
20
SPEC
IFIC
ATIO
NS 1265 SERIES HINGES
All full surface ball bearing reinforcement pivot hinges shall be Dorex Pro 1265 series. Hinges shall be made from select quality steel basematerials and high grade plated finish. Hinges shall be of standard weight, have 2 knuckles, 1 Slimline ball bearing and standard flat top andbottom tips. Hinges shall have six square corners. Hinges shall be handed and supplied with all necessary mounting hardware.
148 SERIES HINGESAll full mortise swing clear ball bearing template hinges shall be Dorex Pro 148 series. Hinges shall be made from select quality steel basematerials and high grade plated finish. Hinges shall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising removablepins and standard flat top and screw-out bottom tips. Hinges shall have four square corners. Hinges shall be handed and supplied with allnecessary wood and undercut machine mounting fasteners.
B73 SERIES HINGESAll half surface ball bearing template hinges shall be Dorex Pro B73 series. Hinges shall be made from select quality steel base materials. Hingesshall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising non-removable pin (NRP) security and standard flat topand knock-out bottom tips. Hinges shall have four square corners. Hinges shall be handed, supplied with all necessary thru bolts, gommetsand undercut machine mounting fasteners.
B77 SERIES HINGESAll half mortise ball bearing template hinges shall be Dorex Pro B77 series. Hinges shall be made from select quality steel base materials. Hingesshall be of standard weight, have 5 knuckles, 2 Slimline ball bearings with non-rising non-removable pin (NRP) security and standard flat topand knock-out bottom tips. Hinges shall have four square corners. Hinges shall be handed, supplied with all necessary wood and undercutmachine mounting fasteners.
8500 SERIES EXIT DEVICESExit devices for interior and exterior doors shall be Dorex 8500 series made from heavy gauge steel and shall meet the requirements of ANSI A156.3 Grade 2. The touch pad exit device shall have a 2 3/4” (70mm) backset (retrofit 161 door prep) and permit easy installation oneither wood or hollow metal doors with moderate traffic. The exit device shall be non-handed, field sizable, and shall project no more than2 9/16” (65mm) from the door surface. On non-fire labeled doors, dogging of the exit device shall be permitted with the use of a hex key.The exit device shall be supplied with stainless steel latch bolts, stainless steel springs and all the necessary mounting fasteners.OPTIONAL: All Dorex 8500 series exit devices shall have a wide variety of exterior trims. The Dorex 8500V exit device shall have surfacemounted vertical rods.
NH900 SERIES EXIT DEVICESExit devices for interior and exterior doors shall be Dorex NH900 series and shall meet the requirements of ANSI A156.3 Grade 2. The rimtype crossbar exit device shall have a 2 3/4” (70mm) backset (retrofit 161 door prep) and permit easy installation on either wood or hollowmetal doors with moderate traffic. The exit device shall be field reversible, field sizable, and shall project no more than 4 3/4” (121mm) fromthe door surface. Dogging of the exit device shall be permitted with the use of a hex key. The exit device shall be supplied with all the necessary mounting fasteners. OPTIONAL: All Dorex NH900 series exit devices shall have a wide variety of exterior trims. The Dorex NH900series exit device shall be capable to accommodate a maximum 48” (1219mm) crossbar.
1100 SERIES EXIT DEVICESExit devices for narrow to wide stile aluminum doors with moderate traffic shall be Dorex 1100 series made from high tensile strength aluminumalloy material. The rim type panic bar exit device shall be handed, field sizable, and shall project no more than 4 5/8” (117mm) from the doorsurface. Dogging of the exit device shall be permitted with the use of a slotted key or outside cylinder. The exit device shall be supplied withall the necessary mounting fasteners. OPTIONAL: The Dorex 1185 exit device shall have a non-handed concealed vertical rod. The Dorex 1100series exit device shall be capable to accommodate a maximum 48” (1219mm) contoured aluminum extruded crossbar.
COVER 1700
700 SERIES DOOR CLOSERS
1700 SERIES DOOR CLOSERS
COVER 1900
1900 SERIES DOOR CLOSERS
21
SIZE
CH
ART
S
MODEL A B C D E F COVER
1900 11 1/8”(283mm)
11 7/8”(302mm)
1 1/8”(29mm)
2”(51mm)
3 3/8”(86mm)
2 3/8”(60mm)
12 1/8” x 3”(308mm x 76mm)
MODEL A B C D E F COVER
1700 9 1/16”(230mm)
9 3/4”(248mm)
3/4”(19mm)
1 3/4”(44mm)
3 1/4”(83mm)
2 7/8”(73mm)
10 9/16” x 2 1/16”(268mm x 52mm)
MODEL A B C D E F
751 6 1/2”(165mm)
7 1/8”(181mm)
3/4”(19mm)
1 11/16”(43mm)
2 7/8”(73mm)
2 9/16”(65mm)
752 / 753 8 3/16”(208mm)
8 7/8”(225mm) 1 3/4”
(44mm)3 1/4”(83mm)
2 7/8”(73mm)
754 / 755 9 1/16”(230mm)
9 3/4”(248mm)
GX1B SERIES KNOBSETS
TL SERIES KNOBSETS
FH SERIES LEVERSETSGX1L SERIES LEVERSETS
22
SIZE
CH
ART
S
MODEL A B C
GX1B 3”(76mm)
2 1/4”(57mm)
3”(76mm)
MODEL A B C
TL 3”(76mm)
2 1/8”(54mm)
2 5/8”(67mm)
MODEL A B C D
GX1L 3 1/2”(89mm)
5”(127mm)
2 11/16”(68mm)
5/16”(8mm)
MODEL A B C D
FH 3 1/2”(89mm)
4 1/2”(114mm)
1 7/8”(48mm)
1/2”(13mm)
EM SERIES LEVERSETS
TLA SERIES DEADLOCKS FHA SERIES DEADLOCKS
FC SERIES LEVERSETS
GX1A SERIES DEADLOCKSEL SERIES LEVERSETS
23
SIZE
CH
ART
S
MODEL A B C D
FC 3 1/2”(89mm)
4 1/2”(114mm)
1 7/8”(48mm)
1/2”(13mm)
MODEL A B C D
EM 3”(76mm)
4”(102mm)
1 7/8”(48mm)
7/16”(11mm)
MODEL A B C D
EL 3”(76mm)
4”(102mm)
1 7/8”(48mm)
7/16”(11mm)
MODEL A B C
GX1A 2 1/2”(64mm)
1 9/16”(40mm)
1 1/16”(27mm)
MODEL A B C
FHA 2 9/16”(65mm)
1 11/16”(43mm)
1”(25mm)
MODEL A B C
TLA 2 9/16”(65mm)
1 5/8”(41mm)
1 1/8”(29mm)
142 SERIES HINGES
142 44 / 142 454
142 3535
179 SERIES HINGES
179 44 / 454 / 4545 / 55 CB179
179 3535
Inch measurement for reference only, rounded off to nearest 1/32”
Inch measurement for reference only, rounded off to nearest 1/32”
24
SIZE
CH
ART
S
MODEL A B C D E F G H I J
142 3535 3 1/2”(88.9mm)
3 1/2”(88.9mm)
1/2”(13.0mm)
11/32”(9.0mm)
1 13/32”(35.4mm)
N/A 11/16”(17.5mm)
3/8”(9.1mm)
1/8”(3.1mm)
1/16”(1.6mm)
142 44 4”(101.6mm) 4”
(101.6mm)
9/16”(14.0mm)
1/2”(13.0mm)
1”(25.5mm)
31/32”(24.6mm)
3/4”(19.1mm) 3/8”
(9.5mm)1/8”
(3.4mm)142 454 4 1/2”
(114.3mm)19/32”
(15.2mm)1/2”
(12.9mm)1 1/8”
(28.6mm)1 7/32”(31.3mm)
1”(25.4mm)
MODEL A B C D E F G H I J
179 3535 3 1/2”(88.9mm)
3 1/2”(88.9mm)
1/2”(13.0mm)
11/32”(9.0mm)
1 13/32”(35.4mm)
N/A 11/16”(17.5mm)
11/32”(9.1mm)
1/8”(3.1mm)
1/16”(1.6mm)
179 44 4”(101.6mm) 4”
(101.6mm)
9/16”(14.0mm)
1/2”(13.0mm)
1”(25.5mm)
31/32”(24.6mm)
3/4”(19.1mm)
3/8”(9.5mm)
1/8”(3.4mm)
179 4544 1/2”
(114.3mm)19/32”
(15.2mm)
1/2”(12.9mm) 1 1/8”
(28.6mm)1 7/32”(31.3mm) 1”
(25.4mm)179 4545 4 1/2”
(114.3mm)1/2”
(13.0mm)
179 55 5”(127.0mm)
5”(127.0mm)
5/8”(15.9mm)
1/2”(12.9mm)
1 1/4”(31.8mm)
1 15/32”(37.7mm)
5/32”(3.7mm)
3310 44 / 454
3310 3535
3310 SERIES HINGES
1265 SERIES HINGES LH illustrated
1168 SERIES HINGES
Inch measurement for reference only, rounded off to nearest 1/32”
Inch measurement for reference only, rounded off to nearest 1/32”
Inch measurement for reference only, rounded off to nearest 1/32”
25
SIZE
CH
ART
S
MODEL A B C D E F G H I J
1168 454 4 1/2”(114.3mm)
4”(101.6mm)
23/32”(18.0mm)
1/2”(13.0mm)
1 1/8”(28.6mm)
1 7/32”(31.3mm)
1”(25.4mm)
3/8”(9.5mm)
3/16”(4.8mm)
1/16”(1.8mm)
MODEL A B C D E F G H I J
3310 3535 3 1/2”(88.9mm)
3 1/2”(88.9mm) 23/32”
(18.5mm)
11/32”(9.0mm)
1 13/32”(35.4mm)
N/A 11/16”(17.5mm)
11/32”(9.1mm)
1/8”(3.1mm)
1/16”(1.6mm)
3310 44 4”(101.6mm) 4”
(101.6mm)
1/2”(13.0mm)
1”(25.5mm)
31/32”(24.6mm)
3/4”(19.1mm) 3/8”
(9.5mm)1/8”
(3.4mm)3310 454 4 1/2”
(114.3mm)25/32”
(19.6mm)1/2”
(12.9mm)1 1/8”
(28.6mm)1 7/32”(31.3mm)
1”(25.4mm)
MODEL A B C D E F G H I J K L J
1265 3 1/4”(82.5mm)
1 1/2”(38.1mm)
11/16”(17.5mm)
4 9/32”(109.1mm)
1 5/32”(29.1mm)
1/2”(12.7mm)
1 1/8”(28.6mm)
2 3/8”(60.3mm)
3”(76.2mm)
1/2”(12.7mm)
1”(25.4mm)
5/8”(16.0mm)
3/16”(4.8mm)
148 SERIES HINGES LH illustrated
B73 SERIES HINGES LH illustrated
B77 SERIES HINGES LH illustrated
Inch measurement for reference only, rounded off to nearest 1/32”
Inch measurement for reference only, rounded off to nearest 1/32”
Inch measurement for reference only, rounded off to nearest 1/32”
26
SIZE
CH
ART
S
MODEL A B C D E F G H I J
148 454 4 1/2”(114.3mm)
1 23/32”(43.3mm)
19/32”(15.2mm)
1/2”(12.9mm)
1 1/8”(28.6mm)
1 7/32”(31.3mm)
3/8”(9.5mm)
1”(25.4mm)
1/8”(3.4mm)
1/16”(1.8mm)
MODEL A B C D E F G H I J K L M N
B73 4 1/2”(114.3mm)
2 11/32”(59.7mm)
1 13/16”(46.1mm)
9/16”(14.2mm)
1/2”(12.7mm)
1 3/4”(44.6mm)
15/32”(12.0mm)
1 1/32”(26.5mm)
1/2”(12.7mm)
1 1/8”(28.6mm)
1 7/32”(31.3mm)
3/8”(9.5mm)
1”(25.4mm)
1/8”(3.4mm)
MODEL A B C D E F G H I J K L M N
B77 4 1/2”(114.3mm)
1 7/32”(31.0mm)
1 13/16”(45.7mm)
9/16”(14.2mm)
1/2”(12.7mm)
1 3/4”(44.5mm)
1/2”(12.7mm)
N/A 1/2”(12.9mm)
1 1/8”(28.6mm)
1 7/32”(31.3mm)
3/8”(9.5mm)
1”(25.4mm)
1/8”(3.4mm)
HINGE ACCESSORIES
9510 / 9511 / 9512
9515
Inch measurement for reference only, rounded off to nearest 1/32”
27
SIZE
CH
ART
S
ROD DIAMETER 3/8” (10mm)
Shown: chassis and body for 8500 & 8500V models
8500V model assembly
8500 SERIES EXIT DEVICES
MODEL A B C D E F G H I J K
9510
1 3/16”(30.0mm)
7 15/16”(202.0mm)
3 13/32”(86.5mm)
2 9/32”(57.9mm)
1 9/32”(32.3mm)
1/2”(13.0mm)
9/32”(6.9mm)
29/32”(22.9mm)
15/16”(23.7mm)
3/32”(2.5mm)
5/32”(4.0mm)
9511 1/16”(1.2mm)
9512N/A
9515 4 1/2”(114.3mm)
1 1/2”(38.1mm)
1 1/8”(28.6mm)
3/8”(9.5mm)
1/2”(12.9mm)
1 7/32”(31.3mm)
1/8”(3.4mm)
1”(25.4mm)
N/A N/A
MODEL A B C D E F G H I
85002 9/16”(65mm)
7 11/16”(195mm)
2 1/16”(52mm)
18 1/16”(459mm)
33 1/4”(845mm)
1 15/16”(49mm)
N/A N/A N/A
8500V 1 31/32”(50mm)
5 7/8”(149mm)
1 3/8”(35mm)
1100 SERIES EXIT DEVICES LHR illustrated
28
SIZE
CH
ART
S
7 1/2”(191mm)D-pull
NH900 SERIES EXIT DEVICES LHR illustrated
MODEL A B C D E F G H I J K
NH900 4 3/4”(121mm)
2 3/32”(53mm)
8 1/2”(216mm)
2 21/32”(67mm)
38”(965mm)
2 5/32”(55mm)
4 5/8”(117mm)
2”(51mm)
16 1/16”(408mm)
3 1/2”(89mm)
2 1/16”(52mm)
MODEL A B C D E F
1185 / 1195 4 5/8”(117mm)
2”(51mm)
7 3/8”(187mm)
1 1/4”(32mm)
36”(915mm)
1 1/2”(38mm)
8500DT 8500NLS*850585048503 8500B 8500FC 8500FH 8500NL*
EXIT DEVICE TRIMS * Cylinder not included
29
SIZE
CH
ART
SFI
NIS
H G
UID
E
MODEL A B C D
8503 / 8504 / 8505 12 1/2”(318mm)
5 7/8”(149mm)
1 7/8”(48mm)
N/A
8500B
3 1/8”(79mm)
2 1/8”(54mm)
2 5/8”(67mm)
1 1/4”(32mm)
8500FC4 1/2”
(114mm)1 7/8”(48mm)
1/2”(13mm)
8500FH
8500DT6 3/8”
(162mm)
N/A1 1/8”(29mm)
N/A8500NL 3 3/16”(80mm)
8500NLS 3”(76mm)
2 1/8”(54mm)
7/8”(22mm)
CANADIANEQUIVALENT
DOREXU.S.
EQUIVALENTB.H.M.A. DESCRIPTION BASE METAL
- BLR - 383 DARK BRONZE ENAMEL STEEL
- CP - 600 PRIMED COATED STEEL
C1D KJ US1D 693 MAT BLACK STEEL
C2G ZP US2G 603 ZINC PLATED STEEL
C3 BP US3 605, 632 BRIGHT BRASS BRASS, STEEL
C3M - US3M - MIRROR POLISHED BRASS STEEL
C4 SDB US4 633 SATIN BRASS STEEL
C5 AB US5 609, 638 ANTIQUE BRASS BRASS, STEEL
C15 SDN US15 619, 646 SATIN NICKEL BRASS, BRONZE, STEEL
C15A - US15A 620, 647 ANTIQUE NICKEL BRASS, BRONZE, STEEL
C20D DU / STBR US20D 393 DARK BRONZE / DURONODIC / STATUARY BRONZE ALUMINUM, STEEL
C26 CHR US26 625, 651 BRIGHT CHROME BRASS, BRONZE, STEEL
C26D CHR US26D 626, 652 SATIN CHROME BRASS, BRONZE, STEEL
C28 AL US28 628, 689 ALUMINUM ANY
C32D SS US32D 630 SATIN STAINLESS STEEL STAINLESS STEEL
- EXW - - EPOXY WHITE ANY
V3 ENDURANCE - - POLISHED BRASS, LIFETIME FINISH BRASS, STEEL