q60 long-range adjustable-field sensorsstevenengineering.com/pdf/04photo_q60.pdf · q60 long-range...
TRANSCRIPT
MINIATURE
COMPACT
MIDSIZE
FULLSIZE
Q45
OMNI-BEAM
Q60
More information online at bannerengineering.com 217
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
Q60Long-Range Adjustable-Field Sensors• Detects objects within a defined sensing field, ignoring objects located just
beyond the sensing field cutoff
• Features two-turn, logarithmic adjustment of sensing field cutoff point from 0.2 to 2 m, to make it easy to set cutoff point
• Offers infrared, visible red LED or laser sensing beam
• Uses rotating pointer to indicate relative cutoff point setting within sensing range
• Features easy push-button or remote programming of light/dark operate and output timing
• Uses continuous status indicators to verify all settings at a glance
• Available in models for dc or ac/dc universal voltage operation
• Models with visible red lasers for small part detection from long distances
QPMAEURO
-STYLE • PIGTAIL • PUR • CABLE
CALL FACTORY
ONLINE
AUTOCAD, STEP, IGES & PDF
Q60, 10-30V dc
Sensing Mode/LED Range Connection
OutputType Models
Excess Gain andCutoff Point Deviation
FIXED-FIELDADJUSTABLE-FIELD
Min.: 65 - 130 mm† Cutoff:
200 - 1000 mm
2 m
BipolarNPN/PNP
Q60BB6AFV1000EGC-1(p. 220)
Cutoff Point Deviation CurvesCPD-3 & CPD-4 (p. 221)
5-Pin Euro QD Q60BB6AFV1000Q
ADJUSTABLE-FIELDADJUSTABLE-FIELD
Min.: 50 - 125 mm† Cutoff:
200 - 2000 mm
2 m Q60BB6AF2000EGC-2(p. 220)
Cutoff Point Deviation CurvesCPD-1 & CPD-2 (p. 221)
5-Pin Euro QD Q60BB6AF2000Q Moreon next page
Infrared LED Visible Red LED
ACCESSORIES
page220
LASERADJUSTABLE-FIELD
ADJUSTABLE-FIELD
Adjustable-field ModelsSuffix AF, AFV and LAF
60.0 mm
75.0 mm
25.0 mm
67.0 mm
Connection options: A model with a QD requires a mating cordset (see page 220).
For 9 m cable, add suffix W/30 to the 2 m model number (example, Q60BB6AF2000 W/30).
† Minimum range varies by established cutoff point (see excess gain curves, page 220 and cutoff point deviation curves, page 221).
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SEN
SOR
SMINIATURE COMPACT MIDSIZE FULLSIZE
More information online at bannerengineering.com218
Q60 Universal Voltage, 12-250V dc or 24-250V ac
Sensing Mode/LED Range Connection
OutputType Models
Excess Gain andCutoff Point Deviation
FIXED-FIELDADJUSTABLE-FIELD
Min.: 65 - 130 mm† Cutoff:
200 - 1000 mm
2 m SPDTe/m Relay
Q60VR3AFV1000 EGC-1 (p. 220)
Cutoff Point Deviation CurvesCPD-3 & CPD-4 (p. 221)4-Pin Micro QD SPST
e/m RelayQ60VR3AFV1000Q1
ADJUSTABLE-FIELDADJUSTABLE-FIELD
Min.: 50 - 125 mm† Cutoff:
200 - 2000 mm
2 m SPDTe/m Relay
Q60VR3AF2000 EGC-2 (p. 220)
Cutoff Point Deviation CurvesCPD-1 & CPD-2 (p. 221)4-Pin Micro QD SPST
e/m RelayQ60VR3AF2000Q1
CLASS 1 LASER
LASERADJUSTABLE-FIELD
Min.: 100 - 260 mm†
Cutoff:200 - 1400 mm
2 m SPDTe/m Relay
Q60VR3LAF1400 EGC-3 (p. 220)
Cutoff Point Deviation CurvesCPD-5 & CPD-6 (p. 221)4-Pin Micro QD SPST
e/m RelayQ60VR3LAF1400Q1
CLASS 2 LASER
LASERADJUSTABLE-FIELD
Min.: 75 - 240 mm†
Cutoff:200 - 2000 mm
2 m SPDTe/m Relay
Q60VR3LAF2000 EGC-4 (p. 220)
Cutoff Point Deviation CurvesCPD-5 & CPD-6 (p. 221)4-Pin Micro QD SPST
e/m RelayQ60VR3LAF2000Q1
Q60, 10-30V dc
Sensing Mode/LED Range Connection
OutputType Models
Excess Gain andCutoff Point Deviation
CLASS 1 LASER
LASERADJUSTABLE-FIELD
Min.: 100 - 260 mm†
Cutoff:200 - 1400 mm
2 m
BipolarNPN/PNP
Q60BB6LAF1400 EGC-3(p. 220)
Cutoff Point Deviation CurvesCPD-5 & CPD-6 (p. 221)
5-Pin Euro QD Q60BB6LAF1400Q
CLASS 2 LASER
LASERADJUSTABLE-FIELD
Min.: 75 - 240 mm†
Cutoff:200 - 2000 mm
2 m Q60BB6LAF2000 EGC-4(p. 220)
Cutoff Point Deviation CurvesCPD-5 & CPD-6 (p. 221)
5-Pin Euro QD Q60BB6LAF2000Q
(cont’d) Visible Red Laser
Infrared LED Visible Red LED Visible Red Laser
ACCESSORIES
page220
Connection options: A model with a QD requires a mating cordset (see page 220).
For 9 m cable, add suffix W/30 to the 2 m model number (example, Q60BB6LAF2000 W/30).
† Minimum range varies by established cutoff point (see excess gain curves, page 220 and cutoff point deviation curves, page 221).
Connection options: A model with a QD requires a mating cordset (see page 220).
For 9 m cable, add suffix W/30 to the 2 m model number (example, Q60VR3AFV1000 W/30).
† Minimum range varies by established cutoff point (see excess gain curves, page 220 and cutoff point deviation curves, page 221).
Q60 SpecificationsSupply Voltage and Current Q60BB6AF and Q60BB6AFV models: 10 to 30V dc (10% max. ripple) at less than 50 mA exclusive of load
Q60BB6LAF models: 10 to 30V dc (10% max. ripple) at less than 35 mA exclusive of loadQ60VR3LAF and Q60VR3AFV Universal models: 12 to 250V dc or 24 to 250V ac, 50/60 HzInput power 1.5 W max.
Supply Protection Circuitry Protected against reverse polarity and transient voltages (Q60VR3 models’ dc hookup is without regard to polarity)More
on next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
MINIATURE
COMPACT
MIDSIZE
FULLSIZE
Q45
OMNI-BEAM
Q60
More information online at bannerengineering.com 219
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
Q60 SpecificationsOutput Configuration Q60BB6AF, Q60BB6AFV and Q60BB6LAF models: Bipolar: one NPN (current sinking) and one PNP
(current sourcing) open-collector transistorQ60VR3AF, Q60VR3LAF and Q60VR3AFV cabled models: E/M Relay (SPDT), normally closed and normally open contactsQ60VR3AFQ1, Q60VR3AFVQ1 and Q60VR3LAFQ1 (QD) models: E/M Relay (SPST), normally open contact
Output Rating DC models:150 mA max. each output @ 25 °COFF-state leakage current: less than 5 µA @ 30V dc Output saturation NPN: less than 200 mV @ 10 mA; less than 1V @ 150 mAOutput saturation PNP: less than 1V at 10 mA; less than 1.5V at 150 mAUniversal Voltage models: Min. voltage and current: 5V dc, 10 mAMechanical life of relay: 50,000,000 operationsElectrical life of relay at full resistive load: 100,000 operationsMax. switching power (resistive load):Cabled models: 1250VA, 150 W QD models: 750VA, 90WMax. switching voltage (resistive load):Cabled models: 250V ac, 125V dc QD models: 250V ac, 125V dcMax. switching current (resistive load): Cabled models: 5 A @ 250V ac, 5 A @ 30V dc derated to 200 mA @ 125V dc QD models: 3 A @ 250V ac, 3 A @ 30V dc derated to 200 mA @ 125V dc
Output Protection Circuitry Q60BB6AF, Q60BB6LAF and Q60BB6AFV models: Protected against continuous overload or short circuit of outputsAll models: Protected against false pulse on power-up
Output Response Time Q60BB6AF, Q60BB6LAF and Q60BB6AFV models: 2 milliseconds ON/OFFQ60VR3AF, Q60VR3LAF and Q60VR3AFV Universal models: 15 milliseconds ON/OFF
Delay at Power-up 150 milliseconds (Q60BB6LAF has 1 second max.); outputs do not conduct during this time.
Repeatability 500 microseconds
Sensing Hysteresis For Infrared models, see chart HC-2; for Visible Red models, see chart HC-1; and for Laser models, see chart HC-3, all on page 221.2000 mm cutoff - less than 3% of set cutoff distance1600 mm cutoff - less than 2.25% of set cutoff distance1200 mm cutoff - less than 1.30% of set cutoff distance800 mm cutoff - less than 0.5% of set cutoff distance400 mm cutoff - less than 0.25% of set cutoff distance
Adjustments 2 momentary push buttons: ON-delay an OFF-delay ON Delay select: 8 milliseconds to 16 seconds LO/DO select OFF Delay select: 8 milliseconds to 16 seconds Push-button lockout for security
Slotted, geared, 2-turn, cutoff range adjustment screw (mechanical stops on both ends of travel)
Indicators
Note: outputs are activeduring on/off timingselection mode.
Q60AF, Q60AFV and Q60LAF models:ON-Delay Green ON Steady: Run mode, ON-delay is active Green Flashing: ON-delay Selection mode is active OFF-Delay Green ON Steady: Run mode, OFF-delay is active Green Flashing: OFF-delay Selection mode is active 5-Segment Light Bar*: Indicates relative delay time during ON/OFF-delay Selection modes Output Amber ON Steady: Outputs are conducting Green ON Steady: During ON/OFF-delay Selection modes Dark Operate Green ON Steady: Dark Operate is selected Lockout Green ON Steady: Buttons are locked out Light Operate Green ON Steady: Light Operate is selected Signal Green ON Steady: Sensor is receiving signal Green Flashing: Marginal signal (1.0 to 2.25 excess gain)
* Output, Dark Operate, Lockout, Light Operate and Signal indicators function as 5-Segment Light Bar during ON/OFF-delay Selection modes
Laser Characteristics Spot Size: approximately 4 x 2 mm throughout range (collimated beam)Angle of Divergence: 5 milliradiansNOTE: Contact factory for custom laser spot size.
Construction Housing: ABS polycarbonate blend Lens: acrylic Cover: Clear ABS
Environmental Rating IEC IP67; NEMA 6
Connections 2 m or 9 m integral cable. DC models offer a 5-pin Euro-style QD fitting. AC models offer 4-pin Micro-style QD fitting. QD cordsets are ordered separately. See page 220.
Operating Conditions Temperature: Q60BB6LAF (DC) models: -10° to +50° C Q60VR3LAF Universal models: -10° to +45° C All others: -20° to +55° C Relative humidity: 90% at 50° C (non-condensing)
(cont’d)
Moreon next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SEN
SOR
SMINIATURE COMPACT MIDSIZE FULLSIZE
More information online at bannerengineering.com220
Q60 SpecificationsCertifications
Hookup Diagrams DC: DC08 (p. 745) Universal Cabled: UN01 (p. 753) Universal QD: UN08 (p. 754)
Class 1 LasersLasers that are safe under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001(E), section 8.2.
For safe laser use:• Do not permit a person to stare at the laser from within the beam.• Do not point the laser at a person’s eye at close range.• Locate open laser beam paths either above or below eye level, where practical.
Class 2 LasersLasers that emit visible radiation in the wavelength range from 400 nm to 700 nm where eye protection is normally afforded by aversion responses, including the blink reflex. This reaction may be expected to provide adequate protection under reasonably foreseeable conditions of operation, including the use of optical instruments for intrabeam viewing. Reference 60825-1 Amend. 2 © IEC:2001(E), section 8.2.
For safe laser use:• Do not permit a person to stare at the laser from within the beam.• Do not point the laser at a person’s eye at close range.• Locate open laser beam paths either above or below eye level, where practical.
(cont’d)
Euro QDSee page 685
Length
Threaded 5-Pin
Straight Right-Angle1.83 m MQDC1-506 MQDC1-506RA
4.57 m MQDC1-515 MQDC1-515RA
9.14 m MQDC1-530 MQDC1-530RA
Micro QDSee page 698
Length
Threaded 4-Pin
Straight Right-Angle1.83 m MQAC-406 MQAC-406RA
4.57 m MQAC-415 MQAC-415RA
9.14 m MQAC-430 MQAC-430RA
Cordsets
Adjustable-Field ModeQ60 Infrared
1
10
100
EXCESS
GAIN
DISTANCE
1000
10000
0.10 m(0.33')
1 m(3.3')
10 m(33')
0.01 m(0.03')
at 200 mm
at 2000 mm
Q60AF Infrared
Cutoff: 200- 2000 mm LED:
Adjustable-Field ModeQ60 Visible Red
1
10
100
10 mm 0.4"
100 mm 4"
1000 mm 40"
1 mm 0.04"
1000
10000
E X C E S S
G A I N
DISTANCE
at 200 mm at 1000 mm
Q60AF Visible Red
Cutoff: 200- 1000 mm LED:
EGC-1 EGC-2
= Infrared LED = Visible Red LED ☼ = Visible Red Laser
Excess Gain (Performance based on 90% reflectance white card)
Adjustable-Field ModeQ60 Class 2 Laser
1
10
100
EXCESS
GAIN
DISTANCE
1000
0.10 m(0.33')
1 m(3.3')
10 m(33')
0.01 m(0.03')
at 200 mm
at 2000 mm
Q60AF Class II
Cutoff: 300- 2000 mm LED: ☼
Adjustable-Field ModeQ60 Class 1 Laser
1
10
100
EXCESS
GAIN
DISTANCE
1000
at 200 mm
at 1400 mm
0.10 m(0.33')
1 m(3.3')
10 m(33')
0.01 m(0.03')
Q60AF Class I
Cutoff: 200- 1400 mm LED: ☼
EGC-3 EGC-4
Additional cordset information available.See page 679.
BracketsQ60
SMBAMSQ60IP SMBAMSQ60P SMBQ60
pg. 651 pg. 651 pg. 669
Additional bracket information available.See page 620.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
MINIATURE
COMPACT
MIDSIZE
FULLSIZE
Q45
OMNI-BEAM
Q60
More information online at bannerengineering.com 221
PhotoelectricsSensors
Fiber OpticSensors
Special PurposeSensors
Measurement & Inspection Sensors
Vision
Wireless
Lighting &Indicators
Safety Light Screens
Safety Laser Scanners
Fiber OpticSafety Systems
Safety Controllers & Modules
Safety Two-Hand Control Modules
Safety Interlock Switches
Emergency Stop & Stop Control
Adjustable-Field ModeQ60 Infrared
2.5
3.0
2.0
1.5
1.0
0.5
0200 400 600 800 1000 1200 1400 1600 1800 2000
Cutoff Setting (mm) with 90% White Card
Hyst
eres
is (%
of C
utof
f)
6% Black Card
Cutoff: 2000 mm LED:
Adjustable-Field ModeQ60 Infrared LED
1501401301201101009080706050
200 400 600 800 1000 1200 1400 1600 1800 2000Cutoff Distance (mm) with 90% White Card
Mini
mum
Ran
ge w
ith a
6% B
lack C
ard
(mm
)
Adjustable-Field ModeQ60 Visible Red
2.0
1.5
1.0
0.5
0200 400 600 800 1000
Cutoff Setting (mm) with 90% White Card
Hyst
eres
is (%
of C
utof
f) 6% Black Card
Cutoff: 1000 mm LED:
Adjustable-Field ModeQ60 Infrared LED
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10200 400 600 800 1000 1200 1400 1600 1800 2000
Cutoff Setting (mm) with 90% White Card
Perc
ent D
evia
tion
18% Gray Card6% Black Card
HC-1
CPD-1
HC-2
CPD-2
= Infrared LED = Visible Red LED ☼ = Visible Red Laser
Adjustable-Field ModeQ60 Lasers
6.0
4.0
2.0
0200 400 600 800 1000 1200 1400 1600 1800 2000
Cutoff Setting (mm) with 90% White Card
Hys
tere
sis
(% o
f Cut
off) 18% Gray Card
6% Black Card
18% Gray Card6% Black Card
Class 1 Laser
Class 2 Laser
Cutoff: Class 1: 1400 mm Class 2: 2000 mm LED: ☼
Adjustable-Field ModeQ60 Visible Red
0
-1
-2
-3
-4
-5200 300 400 500 600 700 800 900 1000
Cutoff Setting (mm) with 90% White Card
Perc
ent D
evia
tion
18% Gray Card6% Black Card
HC-3
CPD-3
Hysteresis Curves
Cuttoff Point Deviation Curves
Adjustable-Field ModeQ60 Lasers
0
-1
-2
-3
-4
-5
-6
-7
-8
-9-10
-12200 400 600 800 1000 1200 1400 1600 1800 2000
Cutoff Setting (mm) with 90% White Card
Perc
ent D
evia
tion
Cutoff Point Deviation
18% Gray Card6% Black Card
18% Gray Card6% Black Card
Class 1 Laser
Class 2 Laser
Adjustable-Field ModeQ60 Visible Red LED
150140130120110100
9080706050
200 400 600 800 1000Cutoff Distance (mm) with 90% White Card
Mini
mum
Ran
ge w
ith a
6% B
lack C
ard
(mm
)
CPD-4 CPD-5
Adjustable-Field ModeQ60 Lasers
250
300
200
150
100
50
0200 400 600 800 1000 1200 1400 1600 1800 2000
Cutoff Distance (mm) with 90% White Card
Min
imum
Ran
ge (m
m)
Minimum Range vs. Cutoff Setting*
*NOTE: Minimum range is independent of target reflectivity
Class 1
Class 2
6% Black Card
6% Black Card
Class 1 Laser
Class 2 Laser
CPD-6
See data sheet for detailed deviation information.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
745745
Accessories
Reference
Hookups
Wiring Diagrams
Glossary
International Reps
More information online at bannerengineering.com
DC Hookups
DC05 Complementary Current Sinking (NPN)Standard Hookup
3
1
4
2
10-30V dc–
+
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sinking (NPN) PlusCurrent Sinking Alarm
3
1
4
2
10-30V dc–
+
Alarm
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC06Complementary Current Sourcing (PNP)
Standard Hookup
3
1
4
2
10-30V dc–
+
Load
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sourcing (PNP) PlusCurrent Sourcing Alarm
3
1
4
2
10-30V dc–
+
Alarm
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC07 Current Sinking (NPN)
3
1
4
2
10-30V dc
RemoteProgramming(N.O.)
+
–
Load
Key
1 = Brown2 = White3 = Blue4 = Black
Current Sourcing (PNP)
3
1
4
2
10-30V dc+
–
RemoteProgramming (N.O.)
Load
4-Pin Pico 4-Pin Euro
4
3 1
2
4-Pin 4-Wire
1 = Brown2 = White3 = Blue4 = Black
4-Pin Euro
2
34
1
DC08 Bipolar (NPN + PNP)
3
1
2
4
5*
10-30V dc**
RemoteTeach
Load
Load
+
–
*NOTE: For some QS30 models, gray wire is used for LO/DO Select. See data sheet.
** Bussable Power models are 12-30V dc
Key
1 = Brown2 = White3 = Blue4 = Black5 = Gray6 = Pink †
† Not Used
6-Pin Pico 5-Pin Euro
1
5
6
3 4
2
2
3
54
1
Moreon next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
753
Accessories
Reference
Hookups
Wiring Diagrams
Glossary
International Reps
More information online at bannerengineering.com
Universal AC/DC Hookups
UN01 SPDT Electromechanical Relay Output
1
3
2
5* †
4
** Supply Voltage (see Specifications)
** NOTE: Connection of dc power is without regard to polarity.
N.C.
C
N.O.
Key
5-Pin Euro1 = Brown2 = White3 = Blue4 = Black5 = Gray†
5-Pin Mini1 = Brown2 = White3 = Blue4 = Black5 = Yellow*
5-Pin Euro 5-Pin Mini
†
2
3
54
1
*
5-Pin 5-Wire1 = Brown2 = White3 = Blue4 = Black5 = Yellow
5-Pin Mini
4
31
5
2
UN02 Emitters
*Supply Voltage (see Specfications)
* NOTE: Connection of dc power is without regard to polarity.
1
3
Key
1 = Brown2 = Blue3 = Black†
† Not Used
3-Pin Mini 4-Pin Mini
13
4 4
31
2
UN03 Emitters with Attached Cable
1
3 L2 (DC–)
L1 (DC+) 1 = Brown3 = Blue
Key
Key
1 = Brown3 = Blue4 = Black†
† No Connection
UN04 Emitters with Quick-Disconnect Cable
1
2L1 (DC+)
L2 (DC–)
No Connection4
3
1 = Red/Black2 = Red/White3 = Red4 = Green
Key
Key
1 = Red/Black2 = Red/White3 = Red†
4 = Green †
† No Connection
4-Pin Micro
4
12
3
Moreon next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
More information online at bannerengineering.com754
REF
EREN
CE
More information online at bannerengineering.com754
HOOKUPS WIRING DIAGRAMS REFERENCE CHARTS GLOSSARY INTERNATIONAL REPS
UN05 P-MOSFET (Sourcing) Receiver—Cabled
1
4
3L2 (DC–)
L1 (DC+)
Load
1 = Brown3 = Blue4 = Black
Key
Key
1 = Brown3 = Blue4 = Black
N-MOSFET (Sinking) Receiver—Cabled
1
4
3 L2 (DC–)
L1 (DC+)
Load
1 = Brown3 = Blue4 = Black
Key
Universal AC/DC Hookups
UN06 P-MOSFET (Sourcing) Receiver—Quick-Disconnect
L2 (DC–)
No Connection
L1 (DC+)1
3
2
4
Load1 = Red/Black2 = Red/White3 = Red4 = Green
KeyKey
1 = Red/Black2 = Red/White3 = Red4 = Green
† No Connection
N-MOSFET (Sinking) Receiver—Quick-Disconnect
L2 (DC–)
No Connection
L1 (DC+)1
3
2
4
Load1 = Red/Black2 = Red/White3 = Red4 = Green
Key
4-Pin Micro
4
12
3
UN07 SPST Solid-State Relay Output
24-250V ac or 12-250V dc*
1
3
2
4
*NOTE: Connection of dc power is without regard to polarity.
IsolatedSolid-stateSPST Switch
Key
1 = Brown2 = White3 = Blue4 = Black
4-Pin Mini
4
31
2
UN08 SPST Electromechanical Relay Output
24-250V ac or 12-250V dc*
*NOTE: Connection of dc power is without regard to polarity.
1
N.O.
C 3 A max. load
2
3
4
Key
1 = Red/Black2 = Red/White3 = Red4 = Green
4-Pin Micro
4
12
3
Moreon next page
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com